Keywords not working as expected

OK, so I decided to go through some of my images today and start adding keywords. I watched the Keyword Quick Tour, read the manual and it all seemed pretty nifty. I particularly liked the Heirachical keywording which, s I understood it, would allow me to apply keywords to some vacation pictures as follows:
New Zealand
-South Island
--Christchurch
--Dunedin
--Southern Alps
---Mt Cook
-North Island
etc etc
What I hoped that this would mean is that if I wanted to find my Mt Cook photos I could just search for Mt Cook. However, if I wanted to find all of the photos from the South Island of New Zealand, say, then I could search for South Island and find all my Mt Cook photos, christchurch photos etc etc.
Unfortunately it doesn't appear that it works this way, I'm getting some very weird search results back. And it gets even weirder if you start changing the heirachy about after you've applied the keywords. So what's going on, does anyone know if Keywords actually work as advertised? I assumed that it was using some sort of intelligent taxonomy id system but now I'm not so sure....
Or am I just getting the wrong end of the stick?
Many thanks,
Phil

if you use the Limited Text search option and search for South Island, you should get all images including those using the sub-keywords. what kind of weird results are you getting?
as for the second part of your question: Aperture doesn't link the keywords in the images to the keywords in the Keyword HUD. I believe it writes the keywords directly to the image and automatically orphans them there.
what's happening when you change the hierarchy?

Similar Messages

'FROM keyword not found where expected'error while Inserting into Text file

Hi,
I have created a simple interface for testing purpose. All it has to do is to Read the data from a Source Text file and put it into another text file (exactly the same headers as that of source) ...
I am using Oracle as my staging area.
But at 'Insert column Header' Stage, it gives me a warning 'FROM keyword not found where expected' and when it goes to the next step 'Insert Rows' it gives me the same error 'FROM keyword not found where expected' and aborts its execution.
I checked the query for insertion and found nothing wrong in it (FROM Statement is just where it is expected, that is) but somehow its not working.
Can somebody help me out as i have done it before on other Installations and dont know why it is occuring that too for the simplest thing in ODI ...
Regards,
Nitesh.

Probably you missed the concat operator.
select rpad(nvl(lu_parid,' '),1,19)|| v_comma ||
rpad(nvl(lu_class,' '),1,3)
from temp_te07

Silverlight 5 binding on a property with logic in its setter does not work as expected when debug is attached

My problem is pretty easy to reproduce.
I created a project from scratch with a view model.
As you can see in the setter of "Age" property I have a simple logic.
public class MainViewModel : INotifyPropertyChanged
public event PropertyChangedEventHandler PropertyChanged;
private int age;
public int Age
get
return age;
set
/*Age has to be over 18* - a simple condition in the setter*/
age = value;
if(age <= 18)
age = 18;
OnPropertyChanged("Age");
public MainViewModel(int age)
this.Age = age;
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
In the MainPage.xaml
<Grid x:Name="LayoutRoot" Background="White">
<TextBox
Text="{Binding Path=Age, Mode=TwoWay}"
HorizontalAlignment="Left"
Width="100"
Height="25"/>
<TextBlock
Text="{Binding Path=Age, Mode=OneWay}"
HorizontalAlignment="Right"
Width="100"
Height="25"/>
</Grid>
And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
public partial class MainPage : UserControl
private MainViewModel mvm;
public MainPage()
InitializeComponent();
mvm = new MainViewModel(20);
this.DataContext = mvm;
I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
Case 1: Debugger is attached =>
TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
Case 2: Debugger is NOT attached =>
TextBox value will be "18" and TextBlock value will be "18" - CORRECT
It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
Has something changed in SL5 and logic in setters is not allowed anymore?
Configuration:
VisualStudio 2010 SP1
SL 5 Tools 5.1.30214.0
SL5 sdk 5.0.61118.0
IE 10
Thanks!

Inputting the value and changing it straight away is relatively rare.
Very few people are now using Silverlight because it's kind of deprecated...
This is why nobody has reported this.
I certainly never noticed this problem and I have a number of live Silverlight systems out there.
Some of which are huge.
If you want a "fix":
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
//PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
Storyboard sb = new Storyboard();
sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
sb.Completed += delegate
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
sb.Begin();
The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML

IPhoto 9.4.3-keyword "" not working correctly in smart albums

Every May I work on the 5th Grade recognition slideshow (using Keynote) for our 5th grade students. In iPhoto, I always give photos the checkmark keyword after I've placed that photo so that I know it's been added/used. I have many smart photo albums with keywords like "5th graders 2012-2013" and others like the checkmark.
None of the smart albums seem to be recognizing and using the checkmark even though it's one of the smart album criteria. For example, I have a smart album called
"5th grade-already used" which has the criteria Match All: Keyword is "5th graders-2012-2013" and Keyword is "✔". However, even after giving some photos the checkmark keyword, this smart album shows up empty.
Similarly, I have another smart album called "5th-Still to use" which has criteria Match All: Keyword is "5th graders-2012-2013" and Keyword is not "✔". The photos that I've placed the checkmark on are STILL showing up here.
These smart albums have always worked before. Has anyone else noticed issues with the checkmark keyword not working properly? It has to have happened with an update sometime in the past year.

When I went to open the library using iPhoto Library Manager, it had to upgrade the library to work with this version of iPhoto.
That's normal.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Subtraction of two key figures normalized to result not working as expected

Hello SAP Community!
I am having problems with getting the right result from a subtraction of two KFs which are "normalized to results" which means the KFs really have values expressed as percentages. The substraction that should be performed is of two percentages (e.g.: 87.298% - 85.527% = 1.77%) but my report prints out the result as "number of units" instead (e.g.: 87.298% - 85.527% = 71,514.00 EA). The two normalized KFs actually "point" to two stock KFs, hence the "number of units".
In order to explain the problem I am facing please analyze below text:
1) Let's assume I have below data:
LOAD MONTH PLANT MATERIAL HORIZON MONTH FORECAST UNITS
200805 PLANT-A MAT-1 200805 510,235.00
200805 PLANT-B MAT-1 200805 74,240.00
200805 PLANT-A MAT-1 200806 438,721.00
200805 PLANT-B MAT-1 200806 74,240.00
200805 PLANT-A MAT-1 200807 356,981.00
200805 PLANT-B MAT-1 200807 74,240.00
200806 PLANT-A MAT-1 200805 0.00
200806 PLANT-B MAT-1 200805 0.00
200806 PLANT-A MAT-1 200806 510,235.00
200806 PLANT-B MAT-1 200806 74,240.00
200806 PLANT-A MAT-1 200807 438,721.00
200806 PLANT-B MAT-1 200807 74,240.00
2) Then, assume I have a comparison report, restricted by load month for two months May and June 2008 (filter restricted by two month variables) with FORECAST units spread accross columns for whole horizon (two months also in this case).
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
 Base Units (May 2008) 438,721.00 356,981.00
 Comparison Units (June 2008) 510,235.00 438,721.00
 PLANT-B
 Base Units (May 2008) 74,240.00 74,240.00
 Comparison Units (June 2008) 74,240.00 74,240.00
 TOTALS Base Units 512,961.00 431,221.00
 Comparison Units 584,475.00 512,961.00
3) Now, let's suppose we want to know the proportions (%) of Base vs Comparison units, so
we normalize forecats to results an we get the below report:
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
 Base Units (May 2008) 438,721.00 356,981.00
 Base Units % (May 2008) 85.527% 85.527%
 Comparison Units (June 2008) 510,235.00 438,721.00
 Comparison Units %(Jun 2008) 87.298% 82.784%
 PLANT-B
 Base Units (May 2008) 74,240.00 74,240.00
 Base Units % (May 2008) 14.473% 15.702%
 Comparison Units (June 2008) 74,240.00 74,240.00
 Comparison Units %(Jun 2008) 12.702% 17.216%
 TOTALS Base Units 512,961.00 431,221.00
 Comparison Units 584,475.00 512,961.00
4) Finally, let's suppose we want to know the deltas (differences) of Base vs Comparison
units, for both number of units and %. The report now look as below:
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
 Base Units (May 2008) 438,721.00 356,981.00
 Base Units % (May 2008) 85.527% 85.527%
 Comparison Units (June 2008) 510,235.00 438,721.00
 Comparison Units %(Jun 2008) 87.298% 82.784%
 Delta base vs. comp. units % 1.77% 2.74%
 Delta base vs. comp. units 71,514.00 81,740.00
 PLANT-B
 Base Units (May 2008) 74,240.00 74,240.00
 Base Units % (May 2008) 14.473% 15.702%
 Comparison Units (June 2008) 74,240.00 74,240.00
 Comparison Units %(Jun 2008) 12.702% 17.216%
 Delta base vs. comp. units % -1.77% -2.74%
 Delta base vs. comp. units 0.00 0.00
 TOTALS Base Units 512,961.00 431,221.00
 Comparison Units 584,475.00 512,961.00
5) PROBLEM:
In my report, the "Delta base vs. comp. units %" is not working as expected and
calculates number of units just as "Delta base vs. comp. units" does instead of calculating the % difference.
So my report looks as follows:
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
 Base Units (May 2008) 438,721.00 356,981.00
 Base Units % (May 2008) 85.527% 85.527%
 Comparison Units (June 2008) 510,235.00 438,721.00
 Comparison Units %(Jun 2008) 87.298% 82.784%
 Delta base vs. comp. units % 71,514.00 81,740.00 <<<WRONG!!
 Delta base vs. comp. units 71,514.00 81,740.00
 PLANT-B
 Base Units (May 2008) 74,240.00 74,240.00
 Base Units % (May 2008) 14.473% 15.702%
 Comparison Units (June 2008) 74,240.00 74,240.00
 Comparison Units %(Jun 2008) 12.702% 17.216%
 Delta base vs. comp. units % 0.00 0.00
 Delta base vs. comp. units 0.00 0.00
 TOTALS Base Units 512,961.00 431,221.00
 Comparison Units 584,475.00 512,961.00
The formulas are:
a) Delta base vs. comp. units %
Delta base vs. comp. units % = Comparison Units % - Base Units %
b) Delta base vs. comp. units
Delta base vs. comp. units = Comparison Units - Base Units
The KFs
- Comparison Units %
- Base Units %
Are RESTRICTED key figures (restricted to Base and comparison month variables) which
are setup as:
1) Calculate Result As: Summation of Rounded Values
2) Calculate Single Value as: Normalization of result
3) Calculate Along the Rows
The KFs
- Delta base vs. comp. units %
- Delta base vs. comp. units
are FORMULAS setup to:
1) Calculate Result As: Nothing defined
2) Calculate Single Value as: Nothing defined
3) Calculate Along the Rows: user default direction (grayed out)
Thanks for the time taken to read in detail all of this. Long text but necessary to understand what the problem is.
Any help is highly appreciated.
Thank you.
Mario

Hi,
The subraction will be carried out before doing the normalization of your KF's. So, it is displaying "number of units". Create a calculated keyfigure and subtract the KF's and in the properties of this calculated keyfigure, change the enhancement as "After Aggregation".
I hope this will solve your issue.
Regards,
S P.

Events in SubVi not working as expected

Hi, I am reposting this question as my previous one didn't resulted in any satisfactory conclusion.
I have attached my Vi's which are not working as expected. If I remove ONE subVi and its associated 3 controls and two indicators, the other one works just fine, but when I add two SUB Vis, it goes messy. I am trying to learn this way, I am sure it can be done many other ways, but please help me finding out the problem doing it this way as in my final MainVi, I would like to use 8 such sub Vis. Thanks.
Solved!
Go to Solution.
Attachments:
Main.vi ‏11 KB
SubVi.vi ‏12 KB
SubVi_2.vi ‏15 KB

Your main problem is DATA FLOW. A loop cannot iterate until EVERYTHING in it has completed. So, as you have it, you have to have both event structures execture before you can go back to look for the next event. So if you insist on having these subVIs, they need to be in seperate loops.
BTW, you can get away with a single subVI. Go into the VI properties and make it reentrant (preallocated clone). Then each call of your subVI will have its own memory space. A lot easier to maintain that way.
And I know you said you didn't want alternatives, but here's how you can do it all with a single event structure in your main loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Main_MODTR.vi ‏10 KB

AFS ARUN Size Substitution Not Working As Expected

Hi All,
I need help with this. If any one of you have worked with AFS ARUN size substitution, kindly provide me with some details on how can I set it up. I am specially interested in setting up size substitution with two-dimensional grids.
I have setup some examples but it does not work as expected.
Here is a small example:
Say I have a size 28/30, 28/32 .........29/30....
What I want to achieve is that during ARUN if there is a shortage of stock in 28/30 then the remaining requirement qty should be confirmed from size 28/32.
with my setup after 28/30 it goes into looking for stock in 29/30, which is what I do not want.
Any inputs will be really appreciated.
Thanks!!

srdfrn wrote:
Hi YOS,
I tried importing a PCX image into CVI 2010 and then sizing the image to the control and didn't see the behavior you have been describing. Would you mind posting an example (alongside an image file) that demonstrates this?
Also, one thing I noticed is that PCX images appear to be quite dated. Could upgrading them to a JPEG or PNG format be an option for you?
Thanks,
Stephanie R.
National Instruments
Stephanie, thanks for the reply.
I am very sorry to state that I made a mistake.
VAL_SIZE_TO_IMAGE indeed works.
What fails to work is VAL_SIZE_TO_PICTURE. (Second option in Fit Mode attribute in control editing panel)
I tried with JPEG and it's the same.
I am attaching an example.(Load_Image.c & ONEP_3Trow_POS1.JPG)
A panel with two picture rings.
- SW_1 remains at the intended size and the loaded picture is not clear.
- SW_2 will fit to picture size and looks OK.
Appreciate your support,
YOSsi Seter
Attachments:
Load_Image.c ‏2 KB
ONEP_3Trow_POS1.JPG ‏4 KB

ORA-00923:FROM KEYWORD NOT FOUND WHERE EXPECTED

I have nade a oracle ODBC TO MS-EXCEL.While writting query in microsoft query editor I got the error msg
ORA-00923:FROM KEYWORD NOT FOUND WHERE EXPECTED
The following query runs fine on sql plus editior
wht could be the reason ,pls guide me
select ORDR_H.ORDERDT,ordR_h.orderno,ordr_h.partycd "CODE",
DECODE (PARTY_M.PARTY_TY,1,'TRADE',2,'NTR'),
party_m.party_n1,c1.citee_nm "Stockist Place",
c.citee_nm "CONSIGNEE PLACE"
from citee_m c,citee_m c1,ordr_h,ordr_d,party_m
where
ordr_h.orderno=ordr_d.orderno
and c.citee_cd=ordr_h.destncd
and c1.citee_cd=party_ct
and ordr_h.partycd=party_m.party_cd
and ordr_h.orderdt>='01-jan-09'
order by 2,3

One thing that comes to mind is that ODBC does not allow Oracle-specific syntax.

Notification "Launch the app and go to the library" not working as expected

Hello,
we are sending notification "Launch the app and go to the library" - but it's not working as expected, it's still just launching app with last open folio.
Whats wrong there? Do we need v30 app? We have V29, but this is not mentioned in documentation.
Thanks
Martin

Ah.
Ok, now it's clear.
Anyway i would appreciate possibility to force viewer to switch to library view after new issue is detected, even without notification. Quite often requested feature - "there is new cover in Newsstand, but customer don't know how to download new publication easily".
Martin

DB Adapter polling as singleton process is not working as expected

Am using poller DB adapater to control the transaction per seconds to the downstream system and i want this poller process as singleton (One instance should be in running state at a time).
As suggested in oracle documents , below is the parameters configured in composite.xml file.
<service name="polling_Mange_Alert_Events"
ui:wsdlLocation="polling_Mange_Alert_Events.wsdl">
<interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt)"/>
<binding.jca config="polling_Mange_Alert_Events_db.jca">
<property name="singleton">true</property>
</binding.jca>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
override="may">1</property>
<property name="jca.retry.backoff" type="xs:int" many="false"
override="may">2</property>
<property name="jca.retry.maxInterval" type="xs:string" many="false"
override="may">120</property>
</service>
Below is the JCA file parameters configured :
<adapter-config name="polling_Mange_Alert_Events" adapter="Database Adapter" wsdlLocation="polling_Mange_Alert_Events.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/vff-int-fus" UIConnectionName="PT_APPINFRA" adapterRef=""/>
<endpoint-activation portType="polling_Mange_Alert_Events_ptt" operation="receive">
 <activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
 <property name="DescriptorName" value="polling_Mange_Alert_Events.ManageAlertEvents"/>
 <property name="QueryName" value="polling_Mange_Alert_EventsSelect"/>
 <property name="MappingsMetaDataURL" value="polling_Mange_Alert_Events-or-mappings.xml"/>
 <property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
 <property name="MarkReadColumn" value="TRANSACTION_STATUS"/>
 <property name="MarkReadValue" value="Processing"/>
 <property name="PollingInterval" value="10"/>
 <property name="MaxRaiseSize" value="5"/>
 <property name="MaxTransactionSize" value="5"/>
 <property name="NumberOfThreads" value="1"/>
 <property name="ReturnSingleResultSet" value="false"/>
 <property name="MarkUnreadValue" value="Pending"/>
 </activation-spec>
</endpoint-activation>
</adapter-config>
This poller process is running on clustered environment (2 soa nodes) and it is not working as expected as singleton process.
Please advise to solve this issue ?

Hi,
1.Set Singleton property outside <binding.jca> like this:
<binding.jca config="polling_Mange_Alert_Events_db.jca"/>
<property name="singleton">true</property>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
2.Also you can try setting these values in jca file:
<property name="RowsPerPollingInterval" value="100"/>
<property name="MaxTransactionSize" value="100"/>
3. try to increase the polling interval time.
Regards,
Anshul

TCP Window sizing not working as expected for Windows server 2008 R2 SP1

Hi ,
TCP window size is not working as expected. It is varying . Aplied the hotfix suggested by Microsoft and set the multipliccation factor as 1.The window size is not getting auto tuned based on the client machine. The data transfer rate is getting degraded.
Please help.
Thanks,
Pro1962

Hi,
I think window auto-tuning is enabled.
You can disable it by running the following commend.
netsh interface tcp set global autotuninglevel=disabled
Hope this helps.

Container-Managed Transaction Type Attributes not working as expected

I am having a problem with the container-managed transactions not working as expected. I have 2 methods that work as follows:
MethodA{
for(a lot)
call MethodB;
@Transaction Type = RequiresNew
MethodB{
EntityManager Persist to database
I want the code in MethodB to be committed to the database when methodB returns. The problem is that I am running out of memory and MethodA is failing. When methodA fails after numerous calls to MethodB nothing is persisted to the database.
It is my understanding that when using requires new transactions that a new transaction is started for each call to the method and ends when the method returns while the calling method transaction is suspended.
How am I misunderstanding the requiresNew transaction attribute. What can I do to make a batch insert into my database that will not run out of memory (commit when a methodB returns)?
Thanks in advance.

The problem is that EJB invocation semantics for security, container-managed transactions, etc.
only apply when an invocation is made through an EJB reference. In your case, you are directly
invoking the implementation method from within the bean. The EJB container has no idea that's
happening. It's no different than invoking a utility method.
In order to get the behavior you'd like, you need to retrieve a reference to your own bean and invoke
through that. You can use SessionContext.getBusinessObject() to get the EJB reference for the
business interface through which the method in question is exposed.
--ken

Namespaces not working as expected

Hi, I've got problems with namespaces not working as expected. When I isolate a process into a new network and mount namespace, a newly mounted file system will be visible to all processes.
Steps to reproduce:
$ sudo unshare -mn bash
bash# mount -t sysfs sysfs /sys
bash# exit
$ cat /proc/mounts
Result:
/proc/mounts will contain a new line for sysfs. This means the /sys/fs/cgroups directory will appear to be empty as the new sysfs is mounted over the old However you can undo it by
sudo umount /sys
Expected result:
The /sys directory will only be new inside the bash process started using unshare and not anymore once you exit bash.
Did I understand something wrong? Or might this be a bug in the kernel?
Note that when using
unshare -m bash
without isolating the network namespace it will refuse to mount sysfs as it is already mounted or busy. Strange.

Hello, because sysfs is shared, see unshare(1) for more details.

UpsertDocumentAsync not working as expected

I'm using UpsertDocumentAsync to either insert or update a document, but it doesn't seem to work as expected. When I use it either inserts / creates or
replaces the document. I doubt I'm calling it wrong?
await client.UpsertDocumentAsync(documentsLink, this.document);
Working as expected (but with incorrect name) or not working as expected?
Regards,
Joakim
Joakim Rosendahl Consultant at OnTrax AB, Sweden.

Found this one (doesn't contain the work PATCH though)
http://feedback.azure.com/forums/263030-documentdb/suggestions/7075256-provide-for-upsert
Voted for that one, but it doesn't seem like the developer community is interested in upsert/patch functionality =/.
Joakim Rosendahl Consultant at OnTrax AB, Sweden.

Keyword not working in search bar.

I added keyword for search engines in search bar: for example, for You Tube, it is yt. In the search bar I enter, "yt Avatar" and it displays a Google search for the entry. Why are the keywords not working?

You can modify the pref keyword.URL on the about:config page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/Keyword.URL
* http://kb.mozillazine.org/Location_Bar_search
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Keywords not working as expected

Similar Messages

Maybe you are looking for