KFs in BPC
Hi Folks:
As you know, the objects configured in BPC automatically generate Objects in BW.
(e.g.) Master Data:
1.- Dimension & Dimension Members in BPC >>>>>>Characteristics & Values in BW (Ok)
My cuestion is in case of Transaccional Data:
2.- No create any Object in BPC for Transaccional Data >>>> Automatically get an Key Figure in BW (??)
Questions:
1.- Why only One Key Figure in BW for BPC? (Normally in BW we manage many Characteristics & many KFs)
2.- BPC are limited to one Object for Key Figures?
3.- How manage many Key Figures BPC, using only one KFigure Object in BW?
Thanks a lot
HI Noe -
1.- Why only One Key Figure in BW for BPC? (Normally in BW we manage many Characteristics & many KFs)
Excel is essentially a single KF based model. Excel is the main UI for BPC.
2.- BPC are limited to one Object for Key Figures?
The BPC application has been optimized to process an account based data model. An account based data model in its purest form has only one key figure.
3.- How manage many Key Figures BPC, using only one KFigure Object in BW?
There is functionality provided within the BPC transformation file definition to allow for key figure mapping. Traditionally BPC implementers have created dummy dimension values (statistical accounts) and/or added dimensionality to discriminate between different types of data in the BPC system.
Regards,
Sheldon
Similar Messages
-
Mapping of BI Key figures to BPC Amount
Hi All,
I want to know that how do we map the key figures in BI cube to BPC Amount.
I have also gone through Pravin Datar's Blog ( /people/pravin.datar/blog/2009/04/16/loading-transactional-data-from-any-infocube-to-bpc-application-in-bpc7nw
) regarding it but didn't find the solution.
All the key figures are suggested to be mapped to Amount, but it will not work as whole data will come in amount only. So please suggest me
1. how to proceed with the mapping of different key figures in BI to BPC Amount.
2. Also do we have to create a seperate dimension to hold all these key figures.
Please help me in above doubts.
Thanks in advance
SanjayHI sanjay,
Are you talking about the situation in which multiple key figures are to be mapped to single Signdata in BPC?
if that is the case, there is a possibilty in BI where u can create BI cube with single keyfigure and load the data to it by using rule groups option in BI transformations. fields can be transformed below manner.
BI cube with multiple KFs.
Field 1 Field 2 Fin year end Quarter M1 M2 M3
B IN 2008 1 100 50 80
D US 2008 2 150 200 250
C ZY 2008 3 75 450 55
Transformed BI cube structure
Field 1 Field 2 Fin year end Quarter Month KF
B IN 2008 1 4 100
B IN 2008 1 5 50
B IN 2008 1 6 80
D US 2008 2 7 150
D US 2008 2 8 200
D US 2008 2 9 250
C ZY 2008 3 10 75
C ZY 2008 3 11 450
C ZY 2008 3 12 55
this can be achieved using Rule groups technique in BI transformations
Thanks,
Kavya -
How to use the RateEntity dimension in SAP BPC?
Hello everbody,
I am implementing a consolidation process using SAP BPC. I want to use the RateEntity dimension, to translate a same currency into different exchange rates depending on the company.
I want the company which ID is GFU (which is from Brazil) in LegalEntity dimension is converted using a special exchange rate. I have added a GFU member in RateEntity dimension, and I have entered the exchange rates for the member GFU and for the member Global in RateEntity dimension.
But the problem is that after I run the FX Restatement package, converted data for this company is not the proper one, because Global exchange rates have been used instead of GFU exchange rates. Does anybody know why? Do I have to do anything else?
Thank you very much for your timeDo you see the search functionality in the upper left of the screen?
Okay, now type in ecatt, press enter and in the next screen filter on blogs. -
How to hide member Account dimension from BPC Administrator for Reporting
Hi experts, i need to hide some members of the Account dimension for reporting, because those members dont use it anymore, but i dont want delete them.
The question is: Does it exist any propierties for this dimension type that allows hiding members in reporting without set members in the BPC for Excel?
I can create a report which contain the members i want to show, but if any change occurs (client desire) the report is outdated.
Thank you in advance
Ignacio VazquezIgnacio,
There is no function like that.
You can choose below two options.
1. Create a property like 'NOUSE' and set a value 'Y' for unused member
When you create EVDRE report, set a filter against that property that has value 'N'
then those members will not be shown at the report.
2. Create 'NOUSE' parent member and put members under this parent member.
Maybe option 1 is more easier to do that.
I hope it will help you
James Lim -
Using a variable in an allocation routine in SAP BPC 7.5NW
Below is a very simple BPC allocation routine I wrote. The data originally sits on a dummy profit center and needs to be allocated to all itu2019s relevant profit centers. These relevant profit centers can be derived from the profit center hierarchy (BPC_ + ID of entity).
When I hardcode the Profitcenter and the entity, the routine works (as below). But what I really want is that it works variable as in the line that I commented out. Any idea whether this could work (BPC 7.5NW) ? If not, I am afraid I need to go to ABAP, which is really a pitty
//ALLOCATION PROCEDURE CONVERSION RATE
//=====================================
*RUNALLOCATION
*FACTOR=1
*DIM SEBACCOUNT WHAT=CONV_RATE; WHERE=<<<; USING=<<< ; TOTAL=<<<
//*DIM PROFCENT WHAT=DUMPC; WHERE=BAS(BPC_"%ENTITY_SET%");USING=<<<; TOTAL=<<<
*DIM PROFCENT WHAT=DUMPC; WHERE=BAS(BPC_OKB);USING=<<<; TOTAL=<<<
*DIM ENTITY WHAT=OKB; WHERE=<<<; USING=<<< ; TOTAL=<<<
*ENDALLOCATION
Thanks
NicoGersh,
It works now. I have implemented the below code (ENTITY needed to contain the variable as well). The relationship profitcenter and entity is very important as it derives the relevant profitcenters from the profit center hierarchy (e.g. all profitcenters under the legalentity node).
//ALLOCATION PROCEDURE CONVERSION RATE
//=====================================
*FOR %ENT% = %ENTITY_SET%
*RUNALLOCATION
*FACTOR=1
*DIM SEBACCOUNT WHAT=CONV_RATE; WHERE=<<<; USING=<<< ; TOTAL=<<<
*DIM PROFCENT WHAT=DUMPC; WHERE=BAS(BPC_%ENT%);USING=<<<; TOTAL=<<<
*DIM CATEGORY WHAT=FCSTCUR; WHERE=<<<; USING=<<< ; TOTAL=<<<
*DIM ENTITY WHAT=%ENT%; WHERE=<<<; USING=<<<; TOTAL=<<<
*ENDALLOCATION
*NEXT
Thanks
Nico -
Error while creating a new Dimension/Model in BPC 10.0 NW
Hello Experts,
I am using BPC 10.0 NW system.
When I try to create new Dimensions or Models I get the following Error Message.
"Error in Admin module or a component used by Admin module.
Failed to create SAP NetWeaver BI InfoObject for dimension."
I am assigned to all the needed task profiles to create Dimensions and Models.
Please assist me to resolve this issue.
Thanks & Regards,
ArchanaThanks Roberto.
The error was coming because while creating the user id "SAP_ALL" Profile was not assigned. So I was not able to create Dimensions and models.
Now the issue is solved. -
Type Mismatch error while saving a BPC Report using eTools
Hi,
Iam getting a 'type mismatch' error when trying to save a BPC Excel workbook using eTools>Save Dynamic Template >Company>eExcel. I am saving it as an .xlsx file.
Can anyone please help out and let me know why I am getting this error.
Thanks
ArvindHi,
You need to save the file as .xls extension. -
Help needed in BPC 10 Member Formula
Hello Experts,
We are in BPC 10 NW SP 11.
Facing below error in report for Ratios hierarchy after
member formula is built.
Formulas is related to ratio
IIF([ACCOUNT_GL].[RE_IREV]=0, NULL, [ACCOUNT_GL].[RE_IAADJ]/[ACCOUNT_GL].[RE_IREV]);SOLVE_ORDER=10
RE_IREV is Income node
RE_IAADJ is expense node.
I have tried formula by removing square brockets for ACCOUNT
DIM member. Still no success.
Surprisingly, same formula, same hierarchy works fine in
another Model.
I have also compared measures in both the models, both are
identical.
Error in the report as below.
Server message:
code: UJO_READ_EXCEPTION_018
severity: error
description: MDX statement error: Value RE_IREV
/CPMB/WADNXJI for characteristic /CPMB/WADNXJI unknown
log id: KoFXP08mHM3X08002fJHZW
DATAVALUE: Value RE_IREV /CPMB/WADNXJI for characteristic
/CPMB/WADNXJI unknown
MDX: WITH MEMBER
[Measures].[PERIODIC] AS 'IIF([/CPMB/WADNXJI
PARENTH2].[2/CPMB/ACCTYPE]="INC",-[Measures].[/CPMB/SDATA],IIF([/CPMB/WADNXJI PARENTH2].[2/CPMB/ACCTYPE]="EXP",[Measures].[/CPMB/SDATA],IIF([/CPMB/WADNXJI
PARENTH2].[2/CPMB/ACCTYPE]="AST",([Measures].[/CPMB/SDATA],
CLOSINGPERIOD([/CPMB/WADBQQD
PARENTH1].[LEVEL02])),IIF([/CPMB/WADNXJI PARENTH2].[2/CPMB/ACCTYPE]="LEQ",-([Measures].[/CPMB/SDATA],
CLOSINGPERIOD([/CPMB/WADBQQD
PARENTH1].[LEVEL02])),-[Measures].[/CPMB/SDATA]))))' SOLVE_ORDER=3 MEMBER [/CPMB/WADNXJI PARENTH2].[RE_ALAE_RATIO] AS
'IIF([/CPMB/WADNXJI
PARENTH2].[RE_IREV /CPMB/WADNXJI]=0,
NULL, [/CPMB/WADNXJI
PARENTH2].[RE_IAADJ
/CPMB/WADNXJI]/[/CPMB/WADNXJI PARENTH2].[RE_IREV /CPMB/WADNXJI])'
SOLVE_ORDER=10 SELECT NON EMPTY {[/CPMB/WADBQQD PARENTH1].[2013.Q1 /CPMB/WADBQQD]
,[/CPMB/WADBQQD
PARENTH1].[2013.Q2 /CPMB/WADBQQD]
,[/CPMB/WADBQQD PARENTH1].[2013.Q3 /CPMB/WADBQQD]
,[/CPMB/WADBQQD
PARENTH1].[2013.Q4 /CPMB/WADBQQD]
,[/CPMB/WADBQQD
PARENTH1].[2013.TOTAL /CPMB/WADBQQD] } * {[/CPMB/WADNXJI PARENTH2].[RE_ALAE_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_ALL_RATIOS /CPMB/WADNXJI] ,[/CPMB/WADNXJI PARENTH2].[RE_COMBINED_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_EXPCOMM_RATIO] ,[/CPMB/WADNXJI PARENTH2].[RE_LOSS_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_OTHERCOMM_RATIO] ,[/CPMB/WADNXJI PARENTH2].[RE_STAT_COMB_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_STAT_EXP_RATIO] ,[/CPMB/WADNXJI PARENTH2].[RE_TOT_EXP_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_TOT_LOSS_RATIO] ,[/CPMB/WADNXJI PARENTH2].[RE_ULAE_RATIO] } ON
0 from
[/CPMB/WAMSZKS/!!O/CPMB/WAMSZKS]
WHERE ( [Measures].[PERIODIC] ,[/CPMB/WAD3OFZ PARENTH1].[ACTUAL]
,[/CPMB/WAD0VHV
PARENTH1].[ALL_CHANNELS /CPMB/WAD0VHV] ,[/CPMB/WAD021F PARENTH1].[LEGAL /CPMB/WAD021F]
,[/CPMB/WADME7W PARENTH1].[ALL_DATASRC /CPMB/WADME7W]
,[/CPMB/WAD0DZ0
PARENTH1].[FGI
/CPMB/WAD0DZ0] )
V1:Value RE_IREV /CPMB/WADNXJI for characteristic /CP
V2:MB/WADNXJI unknown
V3:
V4:
Thanks,
SenoyHello Vadim,
Thanks for the reply.
I am able to process ACCOUNT_GL dimension.
Also, I am using standard TIME dimension.
I found that the virtual provider(created by using source of data for my model) too is showing the error, when I place above member formula.
I am attaching the error messae when I try to do list records in the virtual provider.
When I remove the member formula, everything is fine
Thanks -
Can we enter data in multiple currencies in BPC
Hi all,
In BPC, is it possible to enter data in transaction currencies other than in local currency? For example, if the local currency of an entity is USD, but I need to enter data for the same Accounts in EUR, MYR and SGD as well and not have the system translate the amount in local currency to EUR, MYR and SGD.
Thanks.Hi Tara,
Thanks for your response.
There are several reasons why we might need to enter the data in various currencies other than the local currency.
Firstly, like you have mentioned, we need to enter the local as well as the translated currency amounts for accounts that have to be translated at historical rates. Examples of such accounts will be equity account as you have pointed out. If I understand you correctly, you are saying that it is possible to enter an amount in translated currency in addition to entering the amount in local currency?
Secondly, due to requirements of a relatively new accounting standard, companies need to quantify the sensitivity of any exposures to a foreign currency to foreign exchange rates changes.
For example, the local currency Entity A is USD and it has a bank deposit in SGD 200. If the exchange rate at report date is USD 1 to SGD 2, the SGD bank deposit will be translated and reported as USD 100. Accounting standard requires the company to quantify how much the company will stand to gain or lose if the foreign exchange goes up by 10% or goes down by 10%.
Thirdly, accounting standard also dictates that company discloses exposures to all currencies for financial instruments not denominated in the functional currency of the entity.
Regards -
Not able to refresh data in Xcelsius from BPC
Hi,
I have created a simple xcelsius dashboard with refresh button and data grid.
When I click reload in the preview mode am getting the log on screen where I am trying to connect to the address http://servername in the EPM connection.
But I am not able to log on with BPC user id and password.
am using BPC MS 7.5
please give me your expert advice.
thanks,
Bala
Edited by: Bala on Jun 15, 2011 3:08 PMHi Bala,
Please review the How To Guide for this topic (note that this is for BPC 7.5 NetWeaver):
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8034121d-8419-2e10-229a-99ec678b64c5
Regards,
Zane -
SAP Server Manager Error after BPC installation on domain controller
Hi, I have installed BPC on a domain controller with windows 2003 server (english version). When I launch diagnostic in the "SAP Server Manager" I have the following error message " Current user Name does not have permission for Adminitrators group" . I think that the application it's taking the local user (the diagnistic show that de current user is "server name\user name" instead of "domain name\user name" but I login with the domain Administrator ( this server is a domain controller don't have local users).
ThanksHi
I have the same issue that you had.
"I have installed BPC on a domain controller with windows 2003 server (english version). When I launch diagnostic in the "SAP Server Manager" I have the following error message " Current user Name does not have permission for Adminitrators group" . The application it's taking the local user (the diagnistic show that de current user is "server name\user name" instead of "domain name\user name" but I login with the domain Administrator ( this server is a domain controller don't have local users)."
Can you please let me know how you solved this ?
thanks & regards
Lokesh -
Not able to see the result in particular column of BPC report
Dear All,
I have problem in one of the BPC report where I am not able to see the result into one column but rest of the users are able to see the result for same column in same report without any issues.
Generally, I used this report frequently but having such problem from last few days. Excel has created any logs which I need to clear? Please advice.
Request your help to resolve such problem please.
If you need any information, please let me know.
Thank You
Kind Regards
AnukulHello Anukul,
In the report what type of data you are trying to check in that column. can you please brief about report.
And also please check the excel cell format (right click and check it is a numeric or character), which may help to resolve this issue.
Regards,
Rajesh.K -
BPC 7.5 Unable to add user
Hi All,
After installation of SAP BPC 7.5 for Netweaver I am facing an issue while adding a new user. I am getting the following error whenever I click on 'Add new user' in BPC:
"Could not find function module UJE_API_GET_ALL_TEAMS_DATA"
I have checked in SE37 and UJE_API_GET_ALL_TEAMS_DATA does not exist. What should I do to resolve this error?
Thanks in advance
Regards
Abhik RayHi Abhik,
Have you verified that your Netweaver BPC (ABAP) component, .NET component, and client component are all on the same support package level? It sounds like your .NET/Web server might be on a different level than the ABAP component.
Ethan -
How to collect the BPC parameters into a transport
Hi All
We are in process of transporting out environment for the first time. How are we going to collect all the entries of the BPC parameters in a transport request.
I want to collect all the entries of the UJ0_PARAM_APP table to a transport request. is this we need to do or It has to be manually done when the system is installed in higher environments.
Please advise.
Thanks in advance
AKHi AK,
First of all, not all BPC parameters are transportable. Main reason is that they don't always have to have same value across the landscape. For example, you might want having LOG and STATS set to ON in Dev, but not in Prod. Another reason is that some of them will be generated during first write-back.
Most of the parameters are included in transport if you check Configuration check mark in BPC transport collection.
If you still have some parameters that didn't come over you can manually include them in the transport as Type "Table Entry".
Regards,
Gersh -
Unable to wirte data in BPC NW
Hi
I get the following error when trying to wirte data to my RATE application, in an input schedule or running a copy data package (from one category to another)
Could not perform write (NOT_TRANSACTIONAL)
Any suggestions why and how to fix it.
JesperHi Jesper -
Please logon into the Netweaver backend system and run tcode RSA1. Find the BPC cube associated with your BPC application. Right Click on the cube and select "change real time load behavior". Select the radio button corresponding to "Real time data target can be planned, Loading not allowed".
You should be able to successfully save data from a BPC input template.
Regards,
Sheldon.
Maybe you are looking for
-
I do not want to restore it, as there is infomation on it I need. I haven't backed it up in a while(I know that's my fault), but this is the first time this has happened.
-
Digital Recording with MacBook TOSLINK
I am having problems making a good recording with the TOSLINK port on my MacBook. I my audio source is a dj mixer sending SPDIF through a HOSA SPDIF/TOSLINK converer into my mini-TOSLINK port I get strange fluctuations in volume and generally bad aud
-
Query visible in RSZELTDIR not in Query designer
Hi experts , I do a transport for Query from dev to qas, the name of query is visible in Table of query : RSZELTDIR in my BW Qas, but when I open my Query designer in BW Qas I donu2019t see my query. In suggestion please. Tanks & best regards ILYAEB
-
Best way to use multiple external harddrives?
Hey everyone I want to ideally have a setup where I have 3-4 Harddrives attached to my macbook (1 firewire powered, the rest independently powered), but am nervous about power distribution and data transfer rates. Is there any sort of hub or external
-
Is there a way to rearrange the order of fotos in a given Roll? Alaso, when I try to drag some photos from an early roll to a later one (way down/up the list of rolls, the screen scroll is so fast that I cannot Drop the images where I want them. Is t