Ki235 Error When PGI After Ehp6 Upgrade

Hello
What would cause KI235 error when PGI after ehp6 upgrade? We are upgrading to ehp6 and are receiving this error when PGIing delivery. It only does this in the upgraded client and not in non-upgraded client. The automatic account assignments match exactly in both clients and are not missing or incorrect.
Also check OKB9 setting it is perfectly ok.
Please advise,
Thanks,
Themba

This is a repetitive issue and have you searched the forum before posting?
G. Lakshmipathi

Similar Messages

You Cannot select assembly order for deletion error with BAPI_SALESORDER_CAHNGE after EHP6 upgrade

Hi All,
We are using Z transaction to update Wbs element data to sales order line item through BAPI_SALESORDER_CHANGE. After EHP6 upgrade while updating Wbs element data to old sales orders(Created before EHP6 upgrade) we are getting You cannot select assembly order < order number> for deletion (V1 748) error in BAPI return table, For multiple Sales order run.
But if we run the same order individually it is getting processed successfully. W e are passing the same values in individual and multiple case.
We debugged the BAPI and found one more error related to Authorization, But BAPI return table is giving different error (V1 748)message. Please help us in finding the issue.

Hi Sujay..
Please check.
http://help.sap.com/saphelp_47x200/helpdata/en/b7/58c4c87e0811d2b66a0000e82d8bd1/frameset.htm

I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue

I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue

Hi,
Try here: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird---

I am getting the same error when I attempted to upgrade my iTunes SW as many of you have gotten. I attempted a fresh download with another error. Has anyone figured it out yet?

I am getting the same error when I attempted to upgrade my iTunes SW as many of you have gotten. I attempted a fresh download of iTunes with another error. Has anyone figured it out yet?

Have a look at the articles mentioned here:http://support.apple.com/kb/TS3694
Unknown Error containing "0xE" when restoring: To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

"Unable to create font" error when starting After Effects CS4 (Windows Vista)

Hi all
I have read a hundred posts about the "unable to create font" message that appears when running After Effects in both CS4 and CS5 versions.
On MAC, it seems that installing the Verdana fonts family is enough.
On my PC running Windows Vista, i tried unsuccessfully :
- uninstalled and reinstalled After Effects
- installed all the fonts of the Adobe Font Folio v11
- looked for the "AdobeFnt.lst" to delete it, found no such file in my whole hard drive
- changed my system language to English (USA)
Other CS4 softwares work.
What can i do?

See this page for some additional information about this error.
> I forgot to mention that i also installed the 9.0.2 update. Didn't work either!
You should also install the After Effects CS4 (9.0.3) update.

Error when PGI Delivery Order

HI all,
I am getting the following error message when PGI delivery order for return proses
"Material's product unit must be entered in whole numbers".
Could someone help me please to fix that problem ?
Thanks and best regards,
Saiful arif

Hi,
Have u mantained the base unit of measure and sales unit to be different . If yes, then have you mantained the conversion factor. Kindly check manually there could be a decimal point coming as a result of the conversion factor mantained for the two different UOM in the material master.
Thanks
Manoj Sharma

Backend PO not getting created after EHP6 upgrade

Hi Friends,
Recently there was an SAP patch upgrade in ECC 6.0 and after that while creating the shopping cart the PO is created, but it is not transferring to ECC. We are using the extended classic scenario SAP SRM 7.0. I had checked almost everything right from debugging still clueless. even checked the forums but still the issue is not resolved. Any hints of how to proceed now.
Regards,
Ramesh.

When We are creating shopping cart, system will create Po in back end based on our BAPI.
Check whether BAPI is running properly or not. You are updated new version EHP6 , I hope you should do required configuration. Try in development server whether Po are creating backend or not.
I hope you should check all the configuration in backend system i.e in ECC and SRM side.
Do again batch running and check whether back ground job getting created or not.

GDM errors on VMWare after system upgrade

After a system upgrade today, I'm getting this when GDM starts:
gdm-binary[595]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server for log errors
There aren't any errors in the Xorg log. The vmware driver is explicitly listed as being loaded:
Loading /usr/lib/xorg/modules/drivers/vware_drv.so
Modul vmware: vendor="X.Org Foundation"
vmware: Using vmwlegacy driver everything is fine.
vmwlegacy: driver for VMWare SVGA: vmware0405, wmare0710
When I run gdm, I get this:
** (gdm-binary:970): WARNING **: Failed to acquire org.gnome/DisplayManager
** (gdm-binary:970): WARNING **: Could not acquire name; bailing out
There are several gdm processes running. When I kill them, they're all restarted with the same results.
I've reinstalled xorg-server, xorg-apps, gdm, and xf86-video-vmware.
From what I've gathered, there's a problem with the video driver.
Any recommendations on troubleshooting this?

Solved for me using the solution in this post: https://bbs.archlinux.org/viewtopic.php … 3#p1072193
I wouldn't mark the present thread as solved, however, since the original poster was experiencing issues with VMWare, while my own problems were on VirtualBox.

Error when starting After Effects CC / Trying to install AMM

I keep getting an error saying that my Application Manager is missing or damaged whenever I run AE. This is more of an AMM problem than an AE one I think, because I have had this problem before but I was always able to fix it when I reinstalled the Application Manager. So, I downloaded it again and re-installed it (AFTER using the ACC Cleaner Tool) but this time this keeps popping up:
Not sure what to do. None of the my other adobe products work either because I am missing the AMM. Is there another way to make AE work? I need it by tomorrow.
Does this have anything to do with signing up for Creative Cloud because that won't run properly either?
Sorry, n00b here.
Windows 64
After Effects CC

Zblanco I am sorry but what version After Effects are you trying to use CC or CS6? You discuss After Effects CC through the discussion then you state you just signed up for the Creative Cloud but that doesn't work either. Can you please provide additional details. If you can include what operating system you are using and what Adobe Creative applications do you currently have installed?
Finally you mentioned you remove the Adobe Application Manager and reinstalled. How exactly did you accomplish this?

OpenGL crash error when opening after effects

When I try to load up After Effects it crashes and says "After effects crashed previously attempting to initialize OpenGL". I have updated my graphics card drivers etc. What do I do

This should help you guys hopefully. I am using the After effects cs6 and it crashes on startup with the error "After effects crahses previously attempting to initialize OpenGL. Consult the manufacturer of your graphics card for a compatible OpenGL driver". I have been using the same GPU for ages now and this has never happened.

Error when Opening After Effects CS6 Trial

Hey, When I go to open After Effects CS6 Trial I get an error saying "After Effects error: Crash in progress. Last logged message was: <956> <ae.blitpie> <2> Making New Context" and then I click ok and it says "After Effects can't continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/go/learn_ae_support. If you still can't resolve the issue, please contact Adobe Technical Support (2). (0 :: 42)" any help would be possible
Specs: Windows 7(64bit), I5 3330p, Asrock z75 motherboard, sapphire radeon 7850 1gb graphics card, 8gb ram.

is (or, has this been) http://www.redgiant.com/products/all/magic-bullet-suite/ installed on your computer?
what's your quicktime version?
are you using default video card settings? (if no, try using default)
and google: "After Effects error: Crash in progress" ae.blitpipe
to see a range of causes and solutions.

Error when quitting After Effects

Somtimes when I quit After Effects CS6 on my MacBook Pro (2.2 GHz i7 Processor, 6750M Radeon Graphics Card), I receive the following error message:
After Effects Alert
Last log message was: <140735189834080>
<ae.blitpipe> <2> HardwareBlitpipe Disengaged
Generating crash log, which may take a few minutes
The error is only appearing on some occassions, not all, and I was wondering what it means.

Still receiving the same error.
1. After Effects CS6 with the update linked above.
2. Yes, I installed them
3. Mac OS Lion 10.7.4
4. No problems with codecs.
5. Full text:
After Effects Alert
Last log message was: <140735189834080>
<ae.blitpipe> <2> HardwareBlitpipe Disengaged
Generating crash log, which may take a few minutes
6. It happens when I'm quitting the program.
7. Optical Flares, Twitch, Looks, YY Ramp+, Sure Target, and some scripts. The only one of these usually present is Optical Flares.
8. 2.2 GHz Intel Core i7 4 cores, 8 GB RAM, AMD Radeon HD 6750M
9. No 3rd party I/O hardware.
10. Yes, using OpenGL features (Ray-Traced 3D Rendering, etc.)
11. It occurs when I quit the program.

Headings of CSKS table have been changed in SE16 after EHP6 upgrade

We have upgraded from ECC 6.0 to EHP6 , but after upgrade the headings of CSKS table have been chnaged in SE16 i.e. the last 3 coloumns are seen as Ind. only , where as in SE16N its correctly seen as Name Description , Cost Center , Cost Center short text .
Kindly help me with this

Hi Naresh,
Please check the layout settings, table entry display settings ( field label or field names)
Regards,
Deepak Kori

After EHP6 upgrade in SAP ECC6.0 Stocke not get updated in MMBE after Partial UD

Hello Experts,
Recently we have upgraded our system to EHP6 on ECC 6.0 facing issue in MMBE. We have given Partial UD. after partial UD, some stock suppose to move in Blocked stock as per UD code customization. surprisingly stock not moved to Blocked stock. same is updating through Mb1b transaction.
Thanks in Advance !

Hi,
Check what have you maintained in QM inventory posting in Configuration.
Follow the path: QCC0> Quality Inspection> Inspection lot completion> Define inventory posting.
Movement type 350 should be maintained against VMENGE04 in Q Stock.
ntn

Error when applying Maintenance Pack upgrade from 10.3.1.0 to 10.3.3.0

I'm using smart update util to upgrade my 10.3.1 weblogic installation. In Oracle Smart Update util I selecte Maintenance Packs->Update and it bring up a BEA Smart Update application which finds 10.3.3.0 as the upgrade option.
After selecting this option, clicking ok and accepting the defaults the upgrade operation starts. About halfway through it fails with a Fatal Error message. Looking through the bsu.log I found this error:
2011-03-03 15:57:12,571 WARN [installTwoJdks_gui] com.bea.plateng.wizard.installer.gui.tasks.ProgressTwoJdksTask - JDK archive /tmp/linux32_jdk160_18.zip did not exist, trying jdks directory...
2011-03-03 15:57:12,574 ERROR [installTwoJdks_gui] com.bea.plateng.wizard.WizardController - Uncaught Exception
java.lang.UnsatisfiedLinkError: Can't load library: /weblogic/utils/bsu/upg10330/libjni.so
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1677)
     at java.lang.Runtime.load0(Runtime.java:770)
     at java.lang.System.load(System.java:1005)
     at com.bea.plateng.common.jni.JNIUtil.loadLibrary(JNIUtil.java:207)
     at com.bea.plateng.common.jni.JNIUtil$ZipFile.<clinit>(JNIUtil.java:442)
     at com.bea.plateng.wizard.installer.gui.tasks.ProgressTwoJdksTask.execute(ProgressTwoJdksTask.java:272)
     at com.bea.plateng.wizard.gui.tasks.AbstractGUITask.run(AbstractGUITask.java:42)
     at java.lang.Thread.run(Thread.java:619)
The file does exist at that location: /weblogic/utils/bsu/upg10330/libjni.so
Also failing in the middle of the upgrade messed up the weblogic installation - I had to revert to a backup I made before starting the upgrade.
Any ideas as to why this fails ?

Maybe it helps checking read permissions of /weblogic/utils/bsu/upg10330/libjni.so file and directories...

Ki235 Error When PGI After Ehp6 Upgrade

Similar Messages

Maybe you are looking for