Kicked out of recording mode prematurely

I am seeing a problem with Captivate 3 where clicking certain
UI controls in the app I'm recording kicks me out of recording
mode. The curious thing is it only happens on one machine. Doing
the same thing while recording on another machine works
correctly.

I was able to figure out a workaround. In Captivate, under
Recording>Settings, uncheck the option “Hide Adobe
Captivate system tray icon”. Then on your desktop, right
click on the system tray (the bottom right hand corner). Click on
Properties. Click on the notification area tab. Click customize.
Then find Captivate on the list. It most likely says “Hide
when inactive” next to it. Click on that phrase and it should
turn into a drop down menu. Choose “Hide”. I believe
you would only have to make these settings once and they will stick
until you go back and change them.

Similar Messages

  • Soundtrack Pro pops out of record mode after 1 second  -  Help!

    I have an ADR session tomorrow, so this one is pretty urgent. I have Soundtrack Pro 2.02 on my PPC G5 and I've used it to record vocal tracks for a long time, but I haven't used it a couple months. I started it tonight to do a couple test takes and hit the record button and it records for about 1 second then pops out of record mode. The playhead, however, continues to run. So it's not that it stops altogether, it just quits recording.
    Nothing new in terms of hardware, same preamps, same mic. No new software that I can think of, just the standard updates. Searched the and found the same question asked a earlier this year but was never answered ( http://discussions.apple.com/thread.jspa?threadID=1382762&tstart=6 ). I hope someone knows what's going on. Thanks much.

    UPDATE:
    I did a complete re-install of FCS and it's working now.

  • Hi i need sum help plzzz, iphone 3gs blackscreen and tryed evrything but wont kick out of dfu mode , much apreicated plz

    hi i need sum help plzzz, iphone 3gs blackscreen and tryed evrything but wont kick out of dfu mode , much apreicated plz, it just happen wen i was restoring  the screen is balck but wen i restore it from itunes it says erorr 1600 and itunes does not reconise the phone , i have tryed eveything bt still no luck , I NEED UR HELP PLZZZ ,its my disabled daughters thank you

    Anyone on this forum can correct me if I am wrong. I am not judging you, but to my knowledge the iTunes error 1600  usually affects products that are  jailbroken. again I am not saying that your iPhone 3GS was jailbroken. my only advise off the top of my head to assist you is to download the recent IOS firmware online. I know it is not the the #1 advised option, but it is the only option you have unless you wish to bring it to the Apple Genius bar and see if they can replace the phone or fix it themselves.

  • Taking stack tracks out of record mode, while transport moving

    Is there a way to stack 10 tracks, one record button triggering them all, three other tracks out of the stack and then the record button for the stacked (one button) 10 tracks button being un-engaged, while the transport is moving leaving the other three tracks recording?  All without stopping the transport?

    Hi user13118647,
    It looks like your application is triggering an existing Sun HotSpot VM bug from the older 1.4.2_11 JDK.
    Please review the Sun bug references below.
    http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6405062
    http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6385867
    The problem appears to be resolved in JDK 1.4.2_13(b01). You may want to download and attempt to replicate with this service pack upgrade.
    Another potential problem I noticed is at your classpath level. It looks like you are using a mix of runtime JDK jar files from the Sun JDK and JRockit. Please ensure your JDK classpath; including any reference to any JDK related runtime jar files (tools.jar, rt.jar etc.) is consistent and unique e.g. Sun HotSpot or Oracle JRockit but not both.
    ## Example:
    JAVA_HOME=C:\bea\jdk142_11 // JDK home is setup to the Sun JDK
    CLASSPATH=C:\bea\JROCKI~1\lib\tools.jar; // tools.jar is loaded from the JRockit JDK home
    Regards,
    P-H
    http://javaeesupportpatterns.blogspot.com/

  • Recording Modes greyed out

    All my recording modes have greyed out, as the attached screen shot, so I cannt change options.
    I seem to be stuck in Demo mode.
    Any ideas what I have done wrong?
    Noel
    England

    Hi Noel
    Please note that if you have an image, you may insert it inline using the little camera icon just above where you type the post.
    This way we may see your image immediately and not have to wait for the forum mods to make it available in the attachments section.
    So it will be helpful if you could reply and add the image that way. Perhaps then we might better help you.
    Also, what version of Captivate are you using?
    Cheers... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Im trying to restore my iphone 4S, however i keep getting error 1611!, i have tried kicking the iphone out of recovery mode but then i have another problem, it gets stuck on the apple logo for a few seconds then the low battery symbol shows repeatdly HELP

    Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!

    Jai141 wrote:
    ... and im not sure as i brought the phone of someone else..  i will have to ask them
    Good Luck.
    Jai141 wrote:
    Thanks
    You're Welcome.

  • Whenever an i device is attached iPhoto kicks out of "Full Screen" mode

    Whenever I sync an  i device to iMac iPhoto kicks out of "Full Screen" mode?

    Correct. Full Screen has no import or syncing mode.
    Regards
    TD

  • User kicked out of PS when running Query to excel

    Hi,
    Just to note, I am actually a developer and doesnt know a thing about configurations or any PS tech admin knowledge regarding installation and setting up Psoft. So please be patient with me since im starting this just now and only starting to gain knowledge in this are.
    Just to give an overview, currently we are supporting US psoft and I am located in malaysia tranferring the servers here at our end. we are on UAT right now and having trouble with the psoft application itself and from I see it, it can be caused by how it is installed. Because the US env (server in US) is working perfectly but the M'sia env are having errors (server in M'sia). Just to remind that its the same env only installed in different location, you can call it parallel testing if you like.
    Now with the problem, when the user tries to run a query in the Query manager and doing "run to excel", the user gets kicked out of PeopleSoft online and giving just the literal "Error" message. And when I look at the PSQRYSRV dump file (just learned it yesterday), can't really understand what it says. I try googling it but to no success.
    Does anybody can help me with this? TIA!
    DUMP FILE:
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ==================================================================================
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) PSQRYSRV crash dump at 2009-06-08 17.06.06.000000
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Database=HRUS/ORACLE; ToolsRel=8.44.10; AppsRel=HRMS 8.80.01.000/SP 1; AppServer=//psfapp01:7000; Server=PSQRYSRV; Domain=HR8PRD1; Platform=HP/UX
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Exception Code=0000000b; SIGSEGV: Segmentation violation
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Call stack:
    = begin trace Tue Jun 9 06:06:30 GMT 2009 on 10159
    == process 10159
    -- process 10159
    == dumps
    going to run gdb -nx batch command 10310/commands /proc/10159/exe 10159
    /opt/psoft/hr8prd/bin/psprocinfo[7]: gdb: not found.
    === gdb 10159
    --- gdb 10159
    -- dumps
    - end trace Tue Jun 9 06:06:30 GMT 2009 on 10159
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Customized definitions --
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RDM(JOB/ENG)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RDM(JOB_LBR_GBL_SBR/ENG)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RDM(Z_CC_TBL_LANG/ENG)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RDM(Z_COST_CNTR_TBL/ENG)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RDM(Z_EMPLOYEES/ENG)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RDM(Z_EMPLOYEES_SBR/ENG)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RDM(Z_JOB/ENG)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RDM(Z_LOC_ORG_TBL/ENG)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RDM Definitions: Total=47 Customized=8 In-Use=0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) QDM( /TO_US_EXPRESS/ENG)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) QDM Definitions: Total=1 Customized=1 In-Use=0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) MNDM Definitions: Total=1 Customized=0 In-Use=0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) SRM Definitions: Total=1 Customized=0 In-Use=0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) CRM Definitions: Total=10 Customized=0 In-Use=0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) SSM Definitions: Total=7 Customized=0 In-Use=1
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) CLM Definitions: Total=1 Customized=0 In-Use=0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) UPM(PSHC)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) UPM Definitions: Total=1 Customized=1 In-Use=0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) URL(PPM_MONITOR/ENG)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) URL Definitions: Total=1 Customized=1 In-Use=0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) PRDM(EMPLOYEE/ENG)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) PRDM Definitions: Total=1 Customized=1 In-Use=0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Request Object
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) HTTPMethod : POST
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Protocol : HTTP/1.1
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Scheme : http
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ServerName : psfapp01.apis.dhl.com
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ServerPort : 8000
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ContentURI : http://psfapp01.apis.dhl.com:8000/psc/hr8prd_2/
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RequestURI : /psc/hr8prd_2/EMPLOYEE/HRMS/q/
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) PathInfo : /hr8prd_2/EMPLOYEE/HRMS/q/
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) QueryString : ICQryName=TO_US_EXPRESS
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) FullURI : http://psfapp01.apis.dhl.com:8000/psc/hr8prd_2/EMPLOYEE/HRMS/q/
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RelativeURL : True
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) LogoutURL : http://psfapp01.apis.dhl.com:8000/psp/hr8prd_2/EMPLOYEE/HRMS/?cmd=logout
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ResetTimeoutURL : http://psfapp01.apis.dhl.com:8000/psp/hr8prd_2/EMPLOYEE/HRMS/?cmd=resettimeout
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) BrowserType : IE
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) BrowserVersion : 6.0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) BrowserPlatform : WINNT
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ExpireMeta : <script language='JavaScript'>
    var totalTimeoutMilliseconds = 3600000;
    var warningTimeoutMilliseconds = 3300000;
    var timeOutURL = 'http://psfapp01.apis.dhl.com:8000/psp/hr8prd_2/EMPLOYEE/HRMS/?cmd=expire';
    var timeoutWarningPageURL = 'http://psfapp01.apis.dhl.com:8000/psc/hr8prd_2/EMPLOYEE/HRMS/s/WEBLIB_TIMEOUT.PT_TIMEOUTWARNING.FieldFormula.IScript_TIMEOUTWARNING';
    </script>
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ByPassSignOn : False
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Timeout : 3600
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) WarningTimeout : 3300
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) AuthTokenDomain : .dhl.com
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RemoteHost : 7.248.9.197
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RemoteAddr : 7.248.9.197
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) CharSet : UTF-8
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) GetHelpURL(...) : http://psfapp01.apis.dhl.com:8050/PSOL/htmldoc/f1search.htm?ContextID=%CONTEXT_ID%&LangCD=%LANG_CD%
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) GetContentBody() :
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) GetHeader(...) :
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) User-Agent : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Referer : http://psfapp01.apis.dhl.com:8000/psc/hr8prd_2/EMPLOYEE/HRMS/q/?ICAction=ICQryNameExcelURL=PUBLIC.TO_US_EXPRESS
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Host : psfapp01.apis.dhl.com:8000
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Cookie : psfapp01-apis-dhl-com-8000-PORTAL-PSJSESSIONID=KtZGKjVkQvcJ7dtMnfZ2GXF21GTMy2W2!1326557168; http%3a%2f%2fpsfapp01.apis.dhl.com%3a8000%2fpsp%2fhr8prd%2femployee%2fhrms%2frefresh=list:|||; PS_LOGINLIST=http://psfapp01.apis.dhl.com:8000/hr8prd; SignOnDefault=PSHC; PS_TOKENEXPIRE=8_Jun_2009_23:06:10_GMT; ExpirePage=http://psfapp01.apis.dhl.com:8000/psp/hr8prd/; PS_TOKEN=AAAApAECAwQAAQAAAAACvAAAAAAAAAAsAARTaGRyAgBObwgAOAAuADEAMBSPf+/Tr6qoaRnDIxX4SMQ3HizizwAAAGQABVNkYXRhWHicJYpdCkBAGEXPIFmAbZCR32fEk6Ykj7MEG7Q41/hunU73fsBtojjBoIuejxmOg40pZWFnzZnVXFLPqcVrcw01lTJSiF3gIFqllLeipQ/+5/t/AY0yC8k=; HPTabName=DEFAULT
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Content-Type : application/x-www-form-urlencoded
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Content-Length : 219
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Connection : Keep-Alive
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Cache-Control : no-cache
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Accept-Language : en-us
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Accept-Encoding : gzip, deflate
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Accept : image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-shockwave-flash, */*
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) GetCookie(...) :
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) SignOnDefault : PSHC
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) PS_TOKENEXPIRE : 8_Jun_2009_23:06:10_GMT
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) PS_TOKEN : AAAApAECAwQAAQAAAAACvAAAAAAAAAAsAARTaGRyAgBObwgAOAAuADEAMBSPf+/Tr6qoaRnDIxX4SMQ3HizizwAAAGQABVNkYXRhWHicJYpdCkBAGEXPIFmAbZCR32fEk6Ykj7MEG7Q41/hunU73fsBtojjBoIuejxmOg40pZWFnzZnVXFLPqcVrcw01lTJSiF3gIFqllLeipQ/+5/t/AY0yC8k=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) PS_LOGINLIST : http://psfapp01.apis.dhl.com:8000/hr8prd
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) psfapp01-apis-dhl-com-8000-PORTAL-PSJSESSIONID: KtZGKjVkQvcJ7dtMnfZ2GXF21GTMy2W2!1326557168
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) http%3a%2f%2fpsfapp01.apis.dhl.com%3a8000%2fpsp%2fhr8prd%2femployee%2fhrms%2frefresh: list:|||
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) HPTabName : DEFAULT
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ExpirePage : http://psfapp01.apis.dhl.com:8000/psp/hr8prd/
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) GetParameter(...) :
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) PSHome : hr8prd_2
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Portal : EMPLOYEE
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Node : HRMS
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) InputKeys_bind2 : 06/08/2009
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) InputKeys_bind1 : 06/07/2009
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ICYPos : 0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ICXPos : 0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ICType : Query
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ICStateNum : 1
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ICResubmit : 0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ICQryName : TO_US_EXPRESS
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ICFocus : InputKeys_bind2$prompt
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ICElementNum : 2
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ICChanged : -1
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ICAction : #ICQryDownloadExcelFrmPrompt
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ContentType : q
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ContentID :
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) PeopleCode Globals
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &global_DN : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &bConfigRead : Bool=False
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &bDynamicRole : Bool=False
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &host : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &cnctDN : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &cnctPWD : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &dirProd : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &scope : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &base : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &authAttr : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &defaultUserId : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &authMethod : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &sslYN : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &anonYN : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &authNMap : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &g_strDefaultTab : Str=DEFAULT
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &g_sTraceName : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &g_sFilter : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &g_sCommand : Str=
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &menuNum : Str=46
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) &gQueryRec : Record=NULL
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Current Service=ICQuery; Return code=0; Ok=True
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Component=; Market=; Page=xyzzy; Process flags=700431c0; Mode=0081
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Build Keylist
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Current Keylist
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Begin Component
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Page xyzzy IdxCount=2
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Field InputKeys.bind1 type=editbox occ=(1,1,1) use=0000 rect=(0,0,0,0)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) IdxList: scrl=(-1,-1,-1) rec=0 field=0
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Field InputKeys.bind2 type=editbox occ=(1,1,1) use=0000 rect=(0,0,0,0)
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) IdxList: scrl=(-1,-1,-1) rec=0 field=1
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) End Component
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Begin Scrolls
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Begin level 0[row 0] occcnt=1 activecnt=1 hiddencnt=0 scrlcnt=0 flags=0000 nrec=1
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) RecordsEventSet 00000000 SubscrollsEventSet 00000000
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Rec InputKeys (recdefn 00f5a8e0) keyrec=-1 keyfield=-1
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) EventSet 00000000
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) Row 0 at 00ecef58.
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) CRecBuf InputKeys(00f423f8) fields=2 changed new lvl0 needsinit
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) bind1(001fc498)='2009-06-07'; changed (was '') updated key used
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) bind2(001fc4e4)='2009-06-08'; changed (was '') updated key used
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) End level 0[row 0]
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) End Scrolls
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) User ID=PSHC; Browser=IE/6.0; OpSys=WINNT;
    PSQRYSRV.10159 [06/09/09 06:06:30 [email protected] (IE 6.0; WINNT) ICQuery](0) ==================================================================================
    }

    Hi,
    We have the same issue as yours.
    Did you solve it already?
    If yes, would you mind to share your soloution to us?
    Thanks,
    Richard

  • Startx kicking out multiple errors

    I've been working on getting Xorg.conf set up for awhile now. I've tried with various drivers (the free ati driver, radeon driver, and vesa). At one point I got vesa working but now I can't even get vesa up. Trying different config methods causes issues across the board. I'd prefer to get ATI's proprietary video drivers working and I am pretty sure my card is supported by the Catalyst drivers (7800 and above?). If I have to fall back to the free ati or radeon drivers, that would be okay but I'd rather not have to go with vesa.
    01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro]
    01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary)
    I'm pretty sure it's an AGP card. My monitor (probably not important) is a Sony Trinitron E240.
    So, going forward with the attempt of getting the Catalyst drivers running, I run:
    pacman -Sy catalyst
    aticonfig --intial (as root)
    startx (as normal user)
    Here, I get:
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed : 7
    [several times over]
    The other errors at the end are:
    (EE)fglrx(0): [agp] Failed to set AGP mode!
    (EE)fglrx(0): cannot init AGP
    (EE)fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
    (EE)fglrx(0): XMM failed to open CMMQS connection.
    [some font errors that appear to be non-fatal]
    I'll post the entire Xorg.0.log if needed, but as far as I can tell the big errors are the ones that are kicked out when running startx.
    Xorg.conf (some snipped):
    # Auto-generated by Archie mkxcfg
    # Auto-generated by Archie mkxcfg
    Section "ServerLayout"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "USB Mouse" "CorePointer"
    EndSection
    Section "Files"
    # Additional fonts: Locale, Gimp, TTF...
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/cyrillic"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    # Load "synaptics"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    EndSection
    <snipped input devices>
    Section "Monitor"
    # Warning: This may fry old Monitors
    # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    Identifier "Monitor0"
    HorizSync 28.0 - 96.0
    VertRefresh 50.0 - 75.0
    <ModeLines snipped>
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "fglrx"
    VendorName "All"
    BoardName "All"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Sorry for so much output. Let me know if you need more, though. And sorry - I'm sure you get these questions all the time but I'm at a loss.
    Thanks!

    Hard to remember because I've been trying so many configs. I belive I used xorgconfig to set up a basic Xorg.conf. That was the one (I think) that allowed me to get a GUI with vesa, but I don't want to have to fall back to vesa. If I recall correctly, if I tried using any other drivers with that configuration, invoking startx returned errors about screens not being found.

  • I've tried everything to get my phone out of recovery mode but nothing is working.

    Hi,
    I recently started updating my phone to I.O.S 8.1.3, and it was downloading and updating fine, then it said it had an error updating. I turned it off and on again to see if that would work, and when I clicked install it showed up as if it was turning off. It then showed up that I needed to connect to iTunes. So I did, and it said it was in recovery mode, and that I needed to restore. So I tried that and it said multiple times, when I got part way through the restoration, that the network had timed out when it hadn't. So I researched ways to get it out of the recovery mode.
    I've tried:
    holding down home and lock button
    holding down lock and volume button
    downloading tinyumbrella, however it wouldn't let me open it
    Putting it into DFU mode and restoring
    Nothing is working! I don't know what to do, I need my phone for when I'm travelling and now I don't have one.
    Anyone got any more ideas? I'll be incredibly grateful.
    If I can't get this to work I've wasted £200 of money on a phone that decides it's logical to kill itself. I won't be doing that again.

    I was trying to download TinyUmbrella because some people have said it basically kicks phones out of recovery mode, and I did try that but it hadn't worked, it kept loosing connection with the phone even though it was connected.
    I took the phone to the O2 shop and they did something to restore it, so it's working fine finally thanks for replying!

  • How do I get my iPod touch 5 out of recovery mode without deleting everything?

    So I tried to update IOS 8 today, but it made me update the other one…"IOS 7.1.2" so I did. Then my iPod shut off and went to the screen that says plug into iTunes. I plugged it into iTunes and it said that it was in "Recovery Mode" and that it could not be updated. I tried doing it again & now the screen is just the iTunes symbol with the plug. Can someone help me please? Or do I need to go to the Apple Store to get it fixed?

    If one of these programs will not kick the iPod out of recovery mode you will have to restore via iTunes:
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • How do I get my iphone 4 out of recovery mode

    I am having trouble getting my iphone out of recovery mode. While getting my upgrade my phone became detached from the computer in the middle of the download and went into recovery mode.  I have tried to restore the phone however while itunes is extracting data my phone will reset itself after so long before itunes can finish extracting data and when it does my itunes will not pick it.  Any suggestions??

    You can try this it has always worked for me:
    Try holding both the home button and power button until it shuts off and you see the apple logo come up.
    After that does take your finger off the power button WHILE STILL HOLDING the home button.
    This should send your phone into DFU mode where you can use the recovery option to kick it out of that mode.

  • How to take my phone out of recovery mode without erasing all data

    I recently tried to update my iphone in itunes but an error occured and now my phone is stuck in recovery mode and it says that if i restore i will lose all my data. How can i just go back to where i was before i tried to update. I cannot contact apple because i don't have a phone.
    If i recently synched my phone(days ago) why wouldn't it go back to those settings. Itunnes wont even recognize my phone now.
    17 minutes ago - 4 days left to answer.

    Found this, might help. Use at your own risk.
    http://ipitg.net/how-to-kick-iphone-out-of-recovery-mode-windows/

  • SCVMM Kicks out Nexus 1000V Uplink NIC Any ideas?

    The SCVMM suddenly kicks out the Nexus 1000V Uplink NIC,
    thus preventing me from remediating the change.
    Also i get this error message
    Using Hyper V as virtualization platform

    Hello,
    You can use one Ethernet port-profile with a channel-group command (like 'channel-group auto mode on mac-pinning') and assign it to all the vmnic interfaces that need to carry the same set of VLANs
    The same port-profile can be used on other hosts too. The N1k would automatically bundle (port-channel) the interfaces that belong to the same ESX host (accomplished through the 'channel-group auto' command)
    If you need the interfaces to carry separate sets of VLANs, then you need a different port-profile.
    Port-profile is just a container for a common set of configuration that you can apply for multiple interfaces across multiple hosts.
    Thanks,
    Shankar

  • Does Premiere Pro support a "self-record" mode?

    Does Premiere Pro support a "self-record" mode? It would record a new video with the source being what you are previewing, in terms of "animation" rather than in terms of the quality seen on screen. I often like to make humorous effects by dragging the time indicator back and forth, and have to resort to recording my own screen while in semi-fullscreen mode, then import that video and crop out the chrome. This obviously is not optimal and results in significant quality loss. Does Pr itself have such a feature built in?
    I doubt it does, but it would be extremely useful.

    Ditto what mark said. The intended purpose of the project manager is basically to do just as you said. It was a great solution for anyone that wanted to store the few usable minutes of their media and were confident in just discarding the rest. The problem is that, as Mark said, it doesn't handle the trimming of all common file types these days. That's because, in video, 'destructive' editing is always a matter of re-exporting edited versions and project manage simply cannot export every format to any format. The original files are never actually being trimmed down, you're just getting new versions to replace the old ones with. This represents another drawback in the form of generational loss. That's why the Project Trimmer many not be the ideal solution for you even if it is able to trim all applicable formats for you.
    I tend to agree with Jim and thing that the better way to go is with Prelude. With that app, you can log what you want before hand and then capture (or, more accurately, 'Ingest') just those parts from the start. Still, it might be a good idea to save the original footage on memory card(s), hard drive(s)s (or , dare I say, tape(s_?). That way if you find out later that you didn't capture (or ingest) all of what you wanted, you can always go back and get it. Also you'll have an additional backup which could easily be re-captured from the original source if you've save the prelude project(s).

Maybe you are looking for

  • I have no connection with skype,

    I I have no connection with skype,can not call,video.. Enough credit.Wat is the problem

  • Dlv. type (dlv. catgry LB for mat.  and BWART 541) cannot be determined

    Hi,  We want to post components to subcontracting stock.  I'd use MB11 or MB1B to reference to just one PO/item.  The subcontractor is replenished per component-kit.  When I post in MB1B or MB11  I get message :  Dlv. type (dlv. catgry LB for mat. 10

  • Course companion and Twitter Widget

    Is the course companion and its twitter collaboration tools no longer in Captivate? The adobe site has videos explaining this (Social Learning using Twitter « Rapid eLearning | Adobe Captivate Blog) but I can't seem to find it on the interface - I'm

  • Inaccurate readings about battery in MacBook Pro (mid 2009)

    I am currently getting inaccurate readings about my battery. After, my Macbook says its fully charged at 100%, it switches to 76% after I take the charger out. I have replaced the battery and the AC adapter. There must be something internal must be g

  • Wait time after GR

    Dear Friends In REM,When i do backflush,after GR it comes to inspection stock and then in unrestricted stock.Now before going to next order it should be in wait 30 days in storage loaction and then it goes to next planned order. plz give solution. th