Kill a job with status "Ready"

HI all,
Is there any way that I can delete or cancel a job which has a status "Ready"?
Thanx in advance.
Rgds
Lalit Rana

please only post your question in 1 forum.
I answered you at How to kill a job in "Ready" status.

Similar Messages

Workflow problem with status Ready

HI,
I have a problem with the workflow not getting completed.
The workflow is for the employee attendace 20000081 .
After the manager of the employee accepts the leave application posted by employee , The workflow is in the following state: -
ID 000000340552 Work item type    Background step
Work Item text Find Employee .
Status <b>Ready</b>
Now the question is there any background job which needs to be scheduled for changing the all the workitem with status 'Ready' to be executed .
since once I execute this step manually then the workflow again goes in the ready status with the next step and the next step in this case is 'Create attendance/absence' This stpe of the workflow is in again status 'Ready'.
Please let me know if some know about this problem.
Thanks in advance .
Ankur

Hi ,
Thanks for the prompt reply.
I have tried the auto customizing and I am geeting the following log generated :
Auto-Customizing: General tasks
         E WZ:119 Instances for task TS60001307 already exist
Task TS60001307     not classified as general task
         E WZ:119 Instances for task TS70008037 already exist
Task TS70008037     not classified as general task
         E WZ:119 Instances for task TS70008125 already exist
Task TS70008125     not classified as general task
And while checking the customizing setting in SWU3 the folling entires exists but as I understand the seeting is proper, please have alook below:
An active plan version exists
     Workflow administrator maintained
     RFC destination: User locked
     Generic decision task classified completely
     Tasks for document generation fully classified
     T77* tables all available
     Monitoring job for missed deadlines is scheduled
     Monitoring job for work items with errors is scheduled
     Sending to objects and HR objects activated
     Entries missing in PD control tables
     Default Domain for Internet Mail Maintained
Workflow development environment
     Customizing incomplete
Prefix numbers for standard object types maintained
     An active plan version exists
     T77* tables all available
     Number range defined for customer tasks
     Entries missing in PD control tables
Please let me know if this is not proper .
Thanks and Regards,
Ankur

Mail stuck in wf_notification_out with status = ready

Hi All,
Please help on workflow mailer .
EBS R12 12.1.3 DB:11GR2 OS: OUL5X64
when sending a test mail and verify with this script below , i could see the message was in wf_notification_out table with status READY
BUT IT JUST SAT THERE AND NEVER GOES ANYWHERE.
SELECT n.begin_date,
n.status,
n.mail_status,
n.recipient_role,
de.def_enq_time,
de.def_deq_time,
de.def_state,
ou.out_enq_time,
ou.out_deq_time,
ou.out_state
FROM applsys.wf_notifications n,
(SELECT d.enq_time def_enq_time,
d.deq_time def_deq_time,
TO_NUMBER((SELECT VALUE
FROM TABLE(d.user_data.parameter_list)
WHERE NAME = 'NOTIFICATION_ID')) d_notification_id,
msg_state def_state
FROM applsys.aq$wf_deferred d
WHERE d.corr_id = 'APPS:oracle.apps.wf.notification.send') de,
(SELECT o.deq_time out_deq_time,
o.enq_time out_enq_time,
TO_NUMBER((SELECT str_value
FROM TABLE(o.user_data.header.properties)
WHERE NAME = 'NOTIFICATION_ID')) o_notification_id,
msg_state out_state
FROM applsys.aq$wf_notification_out o) ou
WHERE n.notification_id = &NOTIFICATION_ID
AND n.notification_id = de.d_notification_id(+)
AND n.notification_id = ou.o_notification_id(+);
Here was the result.
BEGIN_DATE STATUS MAIL_STATUS RECIPIENT_ROLE DEF_ENQ_T DEF_DEQ_T DEF_STATE OUT_END_TIME OUT_DEQ_TIME OUT_STATE
11-JUN-12 OPEN MAIL TEST.USER 11-JUN-12 11-JUN-12 PROCESSED 11-JUN-12 READY
Please advise it i miss anything. This was working before.
Thanks in advance.

Please advise it i miss anything. This was working before.Can you find any errors in the Database and Workflow log files?
Troubleshooting Workflow Java Notification Mailer - Technical Reference [ID 1191125.1]
A Guide For Troubleshooting Workflow Notification Emails - Inbound and Outbound [ID 831982.1]
How To Troubleshoot Java-based Workflow Notification Mailer [ID 242941.1]
Troubleshooting Inbound & Outbound Email Notifications [ID 1184846.1]
OWF H Diagnostics, Solutions and Information [ID 332152.1]
Oracle Workflow Release 12 Diagnostics [ID 469822.1]
Thanks,
Hussein

BDOC stops with status ready

Hi
I am replicating campaigns from CRM to PS. Now as I release the campaign BDOC is triggered and goes to backend ECC system. But after replication BDOC comes and stops in inbound queue of CRM with status ready. When I goto SMQ2 and unlock it, it flows through.
This problem I am facing for all campaigns transfered not for any specific one.
Please help me in resolving this issue.
Thanx in advance.
Cheers
Hits

Hi,
This happens because the Queues are not registered.
In SMQ2, note the first 3 cahracters of the queue, e.g, R3A or CSA.
Now goto SMQR and see if any Queue exists with this name like R3A* or CSA*.
If it does, then select the Queue and press button Registration.
If it does not, tehn create a new entry by pressing the same registration button and entering the following value:
Queue name     CSA*
EXEMODE     D
MAXTIME                     60
USERDEST
NRETRY                     30
TDELAY                     300
Doing this is sufficient for your Queue to get executed automatically.
Kindly reward with points in case helpful.
Sharif.

Batch jobs with status "active" but aren't really active

We have 4 jobs that show up in SM37 with a status of "active", but they aren't really active.
They are from 1998, and the client & server listed no longer exist. The PIDs listed do not exist on any servers.
We have tried to cancel, delete, check status, nothing works.
Is there some way to get rid of these jobs from the system?
RSBTCDEL / RSBTCDEL2 will not work, because the jobs are active.
Thank you.

When I try to cancel the "active" job, I get message "Error occured determining batch work process information" (Message BT241).
When I do a Check Status, it just says "1 jobs were checked and 0 jobs were corrected"
When I try to delete, it says "Job xxxx is active. The selected function cannot be performed"
We have jobs SAP_REORG_JOBS and SAP_REORG_JOBSTATISTIC running. I cannot find a standard job SAP_REORG_JOBSSTATUS mentioned in Yves reply. If this existst, can you tell me what program is being executed by the job?
We shut down / restarted one of the systems that has some of the old jobs yesterday, and the problem still exists.
We are at Basis release 702, SP 12.
I will take a look at the BP_JOB* function modules

How to create report with status killed and cancel ?

Hi Guys,
From the report query filter, i only able to pull a certain status of job ? anyone know how to pull the report for the job with status killed and cancel ?
regards,
Chris

Hi Mano,
You are in the filter editor for job definitions (Definitions > Job definitions). Job definitions do not have a status (they simply define what to do, optionally when).
Go to "Monitoring > Jobs" (First item in the first group), you can also click on the button in the tool bar. See screenshots below on my English system:
Regards,
HP

SMQ2 - Many entries status "ready"

Hi experts,
we have many entries in transaction SMQ2 with status "ready".
Can someone post a guide or explain what this means please?
Would be great.
I've also checked SMQR and there I found the status "inactive" by

Hi,
Because of this messages all the remaining were in READY status. due to the error you mentioned above, this message was stuck and blocked all the remaining messages. were all the remaining messages processed now?
BDoc Conversion is not completed successfully
Execute report CRM40_MW_BDOC_TADIR_CONVERSION to finish the upgrade.
No generation performed. Call transaction GN_START.
Middleware stopped.
As mentioned above I think you need to execute the report. As I am BASIS guy, I can suggest you on how to clear the queue.
regarding any functional issue, please wait for functional experts suggestions.
Regards,
Venkata S Pagolu
Edited by: Venkata Pagolu on Feb 21, 2012 12:49 PM

Can't kill a job in Reports Server 9i

i have installed Oracle 9ias release 2 patch 3 under winnt.
i review the current jobs queue of my report server and i have a job started since two day ago. i try to kill that job use a command like this
http://servername/reports/rwservlet/killjobid1281?server=servername
and i recieved the following error
can't kill the job with id 1281REP-50125: Excepción obtenida: org.omg.CORBA.UNKNOWN: minor code: 0 completed: No
anybody can help me? i want to kill this job without have to restart the Report service

time for process identification and pskill I think

Killing a job in "Ready" Status

HI all,
Is there any way that I can delete or cancel a job which has a status "Ready"?
Thanx in advance.
Rgds
Lalit Rana

please only post your question in 1 forum.
I answered you at How to kill a job in "Ready" status.

Kill last reports job with web.show_documents ?

Hi,
I call the Reports service for creating PDF - reports from a Forms modul ,
after creating the report I kill this last Report-job with web.show_document but get the xml response in a new browser window.
Is there another method to send the Report request from Forms without opening this second browser window incl. response data ?
(e.g. a atomic security bundle: Show report result & kill the job ..)
Many thanks
F.

Eventually , the report run... when the active thread got the value 1. How is it done...(i mean the value of 1 , instead of 2 when the report started...????) How to secure that the active thread would be 1 if this is the problem...????
However , because the report is 2 page accross.... the report displays the first page and down the other page.... Is it possible to display both pages accross as i see them in report builder env....?????
Thanks , a lot
Simon

BDC with status JOB

Hi SAP Gurus,
We have an issue where some BDC session are stuck with status Job (In background). Please let me know how we can process these BDCs. The job that was processing these BDCs has failed and we are not able to rerun these jobs as this is not allowed to be run again by system. Even sceduler is not able to scheduled the same job again by copying the failed job neither we are allowed to use SM36 for this by system.
The program here was RSBDCBTC_SUB. This BDC was supposed to post some accounting documents.
Please let me know if some more information is required.
Regards
Vijay

Hi Experts
I am getting the same error. BDC session is stuck with status 'job' since last 2 days. It is not possible to release or unlock this session.It throws up error this session can't be scheduled. I also ran program RSBDCSUB to reprocess the session but the program doesnt pick up. Could you please let us know what other options we have to solve this issue.
Regards,
Santosh

Mgmt Job is Hung with Status 'Running'

hi experts,
This is 10.2.0.4
The Database console shows that a job is still 'Running' after 18 hours. I'm sure it is stuck or the gui is misrepresenting the Status.
I ran this but it did not reset the job's status:
exec mgmt_job_engine.stop_all_executions_with_id ('9C63982533044C729667669DCD4BC847');
Job still shows 'Running'.
Thanks for any ideas. John

I'm unable to determine the session ID. I dont see anything related in Windows Task manager processes, not the database itself. V$session does not have a row that is related to this.
We have Oracle Support for this system so I will submit it to them. I'll post back here when I have it resolved. This has happened once before and I want to finally fix it correctly.
Thanks for your ideas. John

How can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben

Performance issues in using RBDAPP01 for reprocessing iDocs with Status 64

Hi All,
I am using the Standard ABAP Program 'RBDAPP01' for reprocessing Inbound iDocs with Status 64 (Ready to be posted).
When this is scheduled as a job in background, I find that it opens multiple sessions and occupies all available dialog sessions.
This in turn slows down the entire system.
Also, I find the addition 'Packet Size' on the selection screen for the program.
Is it related in any way to the number of sessions the program creates?
Any pointers in resolving this issue will be extremely helpful.
Thanks in advance.
Regards,
Keerthi

Hi,
When you mention Parallel Processing, it becomes active only if I choose that particular option on the selection screen right?
In my case, I haven't chosen parallel processing, but still the overall system performance seems to have fallen very badly.
Now please correct me if my understanding is wrong.
If I increase my Packet Size, it should improve the system performance, but will increase my runtime for the selected iDocs.
But as I have not selected parallel processing in this current situatuon, it should not have any impact here.
Have I summarized it rightly?
Thanks in advance.
Regards,
Keerthi

Backgroud task of a workflow set to status "ready"

Hi all, We have a worflow working since some years ago and now suddenly one problem has started to ocurr...
sometimes, one of the backgroud steps of this workflow is not processed in backgroud by WF-BATCH as expected but it remain in status "READY"....this is not intended and what we are expecting is that this task is processed in background without any user input inmediately after the previous task....
Until today, this task has worked without problems but now we got this task not processed but waiting in status "ready"...this only occurs sometimes, not with all instances of this workflow but only sometimes in a random way....
I can´t see anything wrong in the template...only thing I see is that this background task is executed right after a "dialog task" where user need to aprove or reject the document in workflow. this "dialog step" use the standard task "TS00008267" (generic decission task) as base and this standard task has "latest end" setted (I don´t know if this can be the problem or always has been in this way with this "latest end" active...)
any tips???? someone with same problems????
Thanks in advance....

hi Rob, first at all, thanks for your fast reply, much appreciated mate....
surfing this forum I just found this post () , I think, is same problem, related to RSWERRE program jobs....
I´ve seen that all of those background workitems in status "ready" that we expected to be processed automatically are from same day, and in that day we suffered a problem related to jobs system so I think that is the key of my problem....no wrong workitems in status "ready" others days than that one when we suffered that problem with jobs systems so pretty sure this is my case...
anyway, thanks a lot for your tips...if I found that my problem continues I will be sure of check what you are pointing me...
Thanks.
Miguel.

Kill a job with status "Ready"

Similar Messages

Maybe you are looking for