Killed sessions

Hi,
I kill a session with the commands:
select username, sid, serial#, status from v$session where username like 'RION%'
alter system kill session 'sid, serial#'
and if I give again the first select command at the status column appears KILLED. I want not to have KILLED in the status column.
Thank you,
Mihaela

hi all,
As u know you are seeing the status of at v$session view as killed, I wanna confirm that this will exists in two senario.
When a Session is in inactive state and a kill command on that session is issued then the "status" column of v$session will be updated as killed as to indicate/mark as it is killed, and the "server " column will be updated as psuedo. when the user again try to connect to the session user will receive 0ra-00028 error and the entry will be removed from v$session.
Another senario is that the transaction is at its half way, either in commiting or at the roleback stage for that partucular session then also you can find that the v$table is updated as above.
more information, go through the documentation, at the Server Process handling section.
i hope it cleared your confussion,

Similar Messages

How to kill session in forms

In my application I want to kill session if any user
is idle for 2 minutes.
I am using oracle forms 6i and database oracle 9i

You have to use D2KWutil.pll
In when new form instance write the following code
declare
hWind PLS_INTEGER;
CheckTimer TIMER;
begin
hWind := get_window_property(FORMS_MDI_WINDOW,WINDOW_HANDLE);
Win_API_Session.Timeout_Start_Timer(hWind);
CheckTimer := Create_Timer('CheckTimeout',1000,repeat);
end;
and in when timer expired trigger write the following code
begin
if upper(get_application_property(TIMER_NAME)) = 'CHECKTIMEOUT' then
:timer.t1 := Win_api_session.Timeout_Get_Inactive_Time;
if :timer.t1 > 120 then -- timer is a block and t1 is text item (don't assign a canvas to it, make it invisible)
Win_API_Session.timeout_delete_timer;
exit_form (NO_VALIDATE);
end if;
end if;
end;
hope this helps !!

Urgent-how to run 'alter system kill session 'sid, serial#' in form 6i ?

I want to write a procedure in Form 6i so that user can kill the session by herself.
I know kill session sql is 'alter system kill session 'sid, serial#'', however, I fould that I can only run it it sql plus screen, how can I run it in Form or in Stored procedure?
Urgent....Please!

try using Forms_ddl('alter system......'); in the forms. it will execute the dml statements in the form.
zaibi.

Kill Session in Oracle 10g

Oracle 10g r2
I killed a session after fetching the sid and serial from the v$session as under
select * from v$session where username='SAM';
alter system kill session '530,7420'
Now the status showed killed.
But again after some time one i query the v$session the status turn to inactive.
Why so?

Yeah Madrid....
Thanks for that.. at the developer side.. they did get session killed.
But actually my doubt here was. that once i killed the session then i go the status as "killed" in the v$session
but less then a minute when i again query the v$session then i see the status aa inactive. This is what is not clear to me.

RAR 5.3 - kill session of another user

how can RAR admin kill session of another user?

Hi Partha,
There is no way out to kill a user's session in RAR, nor in UME. The only place you can kill a user's session is in backend (R/3 side of a particular system) in T-code: SM04->select a particular session of any user-> end session.
Regards,
Gurugobinda

ALTER SYSTEM KILL SESSION privilege

Hi All,
Is there any possibility to use this command from a without having DBA priviileges, what is the privilege to be grantd to the ordinary users to execute ALTER SYSTEM KILL SESSION... statement..
Thanks in advance

The procedure proposed by Rusell would be more or less so:
SQL> create or replace procedure kill_session
2 ( v_sid number, v_serial number )
3 as
4 v_varchar2 varchar2(100);
5 begin
6 execute immediate 'ALTER SYSTEM KILL SESSION '''
7 || v_sid || ',' || v_serial || '''';
8 end;
9 /
Procedure created.
SQL> select username, sid, serial# from v$session;
USERNAME                              SID    SERIAL#
                                      147       5078
SYS                                   148       6161
                                      151       6769
                                      156          1
                                      158          1
                                      159          1
REPOS_OWNER                           161      14502
                                      163          1
                                      164          1
                                      165          1
                                      166          1
USERNAME                              SID    SERIAL#
                                      167          1
                                      168          1
                                      169          1
                                      170          1
15 rows selected.
SQL>
SQL> exec kill_session(161,14502);
PL/SQL procedure successfully completed.
SQL>Joel Pérez
http://otn.oracle.com/experts

Kill session permission without alter system permission?

Syntax to kill session is
ALTER SYSTEM KILL SESSION 'session info';
Is there a way to allow a user to kill his/her own session without granting rights to SYSTEM? I don't want anyone to be able to drop the database, but they need to be able to kill their own session. I've looked everywhere...
Thanks in advance!

Yes, assuming you are using standard definer's rights stored procedures. Only if you specify AUTHID CURRENT_USER when creating the stored procedure will you get an invoker's rights stored procedure, which would run with the privileges of the caller, not of the definer.
Justin

To kill session in one schema from another schema

Hi Team,
I got a problem like a table from one of my schema has been locked. I am getting 'ORA-00054: resource busy and acquire with NOWAIT specified' error when trying to delete rows from that table or even when trying to truncate that table.
Let the table be 'T1' present in schema 'VIEW'
I tried to kill the session which is active for that schema by below query
select sid,serial#,status from v$session where username='VIEW' and STATUS = 'ACTIVE';
alter system kill session '681,2586';
But i couldn't do the above as i don't have DBA privilege for that. But i have DBA privilege for another schema let it be 'ADMIN'
Now how can i kill the session in schema 'VIEW' from schema 'ADMIN'
can any one get me solution.
Thanks in Advance
11081985

I got a problem like a table from one of my schema has been locked. I am getting 'ORA-00054: resource busy and acquire with NOWAIT specified' error when trying to delete rows from that table or even when trying to truncate that table.
Before you do anything why don't you actually find out WHY that table has been locked.
You generally should NOT be killing sessions without knowing what is causing the problem to begin with.
Then you also need to determine if you should use KILL SESSION or instead use DISCONNECT SESSION and well as whether the use of IMMEDIATE is appropriate.
Each of those choices acts differently. Many people use KILL when they should really use DISCONNECT.
See DISCONNECT SESSION Clause and KILL SESSION Clause in the ALTER SESSION chapter of the SQL Language doc
http://docs.oracle.com/cd/E11882_01/server.112/e17118/statements_2014.htm#i2282145

Abend while executing alter system kill session command

I have a ML350 G3 Hp server(Xeon 2.4 Ghz) running oracle 8.1.5 on Novell 5.1. Frequently i have locking problems in my software. So when i tried to kill the active session using alter system kill session 'sid, serial#' my server produce following error:
Fatal Exception (Number 14, cause abend: Page fault running process: orcl_000000fe code executing in module core81.nlm v8.1d at offset +6c490h). Any suggestions.

This forum is for posting feedback about the OTN site.
The best place for your question is probably a Database forum.
There is a list of Database forums here:
http://forums.oracle.com/forums/index.jsp?cat=18

Regarding Alter System Kill Session

Hi Guys,
I have to do db refresh from the build .For this I have to kill the sessions and drop the users and recreate the users with the latest build.As the application is running and there are some idle sessions, I have to kill the sessions and drop the users for that I am using a code as below
DECLARE
v_alt_stmt VARCHAR2(1000) := 'ALTER SYSTEM KILL SESSION ''';
v_kill_stmt VARCHAR2(1000);
CURSOR cur_session IS
SELECT s.type type,
s.sid sid,
s.serial# srl_no,
s.username user_name,
s.PROGRAM prog_name
FROM v$session s JOIN gv$process p ON p.addr = s.paddr and s.type='USER';
BEGIN
EXECUTE IMMEDIATE 'ALTER SYSTEM ENABLE RESTRICTED SESSION';
DBMS_OUTPUT.PUT_LINE('The Session has been put in the restricted mode');
FOR v_cur_ssn IN cur_session
LOOP
BEGIN
v_kill_stmt := v_alt_stmt || v_cur_ssn.sid || ',' || v_cur_ssn.srl_no || '''';
DBMS_OUTPUT.PUT_LINE(v_kill_stmt);
EXECUTE IMMEDIATE v_kill_stmt;
EXCEPTION
WHEN others THEN
-- DBMS_OUTPUT.PUT_LINE('The current sessions sid is ' || v_cur_ssn.sid || ' and the srl no is ' || v_cur_ssn.srl_no || ' can not be killed');
END;
END LOOP;
EXECUTE IMMEDIATE 'ALTER SYSTEM DISABLE RESTRICTED SESSION';
DBMS_OUTPUT.PUT_LINE('The restricted mode of the system has been removed');
END;
But sometimes after killing the sessions there are some os processes are going on,to avoid that I have to use 'ALTER SYSTEM DISCONNECT SESSION ''' and 'MMEDIATE' it is workig fine .
Can Any one tell me the logical difference between kill sessions and disconnect
Any information will be highly appreciated.
Thanks in advance
Prafulla

>
Can Any one tell me the logical difference between kill sessions and disconnect
>
Disconnect can be used to disconnect immediately without waiting for any ongoing transactions to complete and recovers all session resousrces.
Kill rolls back ongoing transactions and partially recovers session resources.
Kill is simiilar to SHUTDOWN IMMEDIATE while disconnect is more like SHUTDOWN ABORT.
See DISCONNECT SESSION Clause in the SQL Language doc
http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_2013.htm
>
Use the DISCONNECT SESSION clause to disconnect the current session by destroying the dedicated server process (or virtual circuit if the connection was made by way of a Shared Sever).
•The IMMEDIATE setting disconnects the session and recovers the entire session state immediately, without waiting for ongoing transactions to complete.
>
And KILL SESSION in the same doc next section
>
The KILL SESSION clause lets you mark a session as terminated, roll back ongoing transactions, release all session locks, and partially recover session resources.
IMMEDIATE Specify IMMEDIATE to instruct Oracle Database to roll back ongoing transactions, release all session locks, recover the entire session state, and return control to you immediately.

Alter system kill session always gives ORA-00030

Hello
Im writing a tool for oracle and one of its features requires killing user session (Im connecting with JDBC). The database Im testing on is 11.2.0.2.
I find the sid and the serial# without problems, than I issue the "alter system kill session 'x,y' immediate" command.
So far so good, but I always get an ORA-00030 error saying this session cannot be found.
I double check and the session does exist in the database.
Because I want the tool to make the kill, killing via the OS is not an option.
Its doesn't look like a permission problem because it gives the same error even when connected as system.
Whats wrong ? does this kill command work at all ? Whats its limitations ?
Thanks
Guy Shilo
Edited by: user13266377 on Jun 9, 2011 1:15 AM

user13266377 wrote:
Hello
Im writing a tool for oracle and one of its features requires killing user session (Im connecting with JDBC). The database Im testing on is 11.2.0.2.
I find the sid and the serial# without problems, than I issue the "alter system kill session 'x,y' immediate" command.
So far so good, but I always get an ORA-00030 error saying this session cannot be found.
I double check and the session does exist in the database.
Because I want the tool to make the kill, killing via the OS is not an option.
Its doesn't look like a permission problem because it gives the same error even when connected as system.
Whats wrong ? does this kill command work at all ? Whats its limitations ?
Thanks
Guy Shilo
Edited by: user13266377 on Jun 9, 2011 1:15 AMyou cannot kill the session already killed or disconnected from the session.
refer the link:- this may help you to write scripts to kill session using dbms_scheduler
Grant restricted and kill sessions.

Alter System Kill Session Not Working

I'm not certain as to what the problem may be, but the following code does not work in that the session is not being disconnected.
The attempt is to have this trigger kill a user's logon session if the user is attempting to run a program named 'ex_oc.exe'
I've tested the code (getting the values back to the table as expected) and it appears to be working but it doesn't execute.
I've also tried ''ALTER SYSTEM DISCONNECT SESSION'.
Database is 11g.
Any ideas?
Thanks
CREATE OR REPLACE TRIGGER SYS.DENY_MSB_TRIGGER_UPDATEDD
AFTER LOGON ON Database
DECLARE
v_programname varchar2(64);
v_logontime date;
v_process varchar2(24);
v_machine varchar2(64);
v_sid number;
v_serialnum number;
v_username varchar2(30);
v_stmt2run VARCHAR2(327);
cur INTEGER;
ret INTEGER;
v_string VARCHAR2(500);
BEGIN
SELECT PROGRAM, PROCESS, MACHINE, SID, SERIAL#, USERNAME
INTO v_programname, v_process, v_machine, v_sid, v_serialnum, v_username
FROM V$SESSION
WHERE PROGRAM = LOWER('ex_oc.exe');
INSERT INTO SAUDIT.DENYMSB (PROGRAM, PROCESS, MACHINE, SID, SERIALNUM, USERNAME)
VALUES (v_programname, v_process, v_machine, v_sid, v_serialnum, v_username );
v_string := 'ALTER SYSTEM KILL SESSION' || CHR(39)||v_sid||','||v_serialnum|| CHR(39)||' IMMEDIATE';
EXECUTE IMMEDIATE v_string;
END;
Edited by: user12451703 on Jan 14, 2010 8:57 AM
Edited by: user12451703 on Jan 14, 2010 8:58 AM

user12451703 wrote:
I'm not trying to kill my own session.
Trigger written by Sys and running it as a generic user.You completely misunderstand triggers. Same as SP/SF trigger is always executed in invoking session on behalf of trigger owner. Below is a slighly modified version of your trigger that does not allow user U1 to connect by killing user U1 session:
SQL> connect scott as sysdba
Enter password: *****
Connected.
SQL> CREATE OR REPLACE TRIGGER SYS.DENY_MSB_TRIGGER_UPDATEDD
2 AFTER LOGON ON Database
3 DECLARE
4 v_programname varchar2(64);
5 v_logontime date;
6 v_process varchar2(24);
7 v_machine varchar2(64);
8 v_sid number;
9 v_serialnum number;
10 v_username varchar2(30);
11 v_stmt2run VARCHAR2(327);
12 cur INTEGER;
13 ret INTEGER;
14 v_string VARCHAR2(500);
15 BEGIN
16 SELECT PROGRAM, PROCESS, MACHINE, SID, SERIAL#, USERNAME
17 INTO v_programname, v_process, v_machine, v_sid, v_serialnum, v_username
18 FROM V$SESSION where username = 'U1';
19 EXECUTE IMMEDIATE ('ALTER SYSTEM KILL SESSION ''' || v_sid || ',' || v_serialnum || '''');
20 EXCEPTION
21 WHEN OTHERS THEN
22 RAISE_APPLICATION_ERROR(-20001, 'Execution of this program not allowed', TRUE);
23 END;
24 /
Trigger created.
SQL> create user u1 identified by u1
2 /
User created.
SQL> grant create session to u1
2 /
Grant succeeded.
SQL> connect u1/u1
ERROR:
ORA-00604: error occurred at recursive SQL level 1
ORA-20001: Execution of this program not allowed
ORA-06512: at line 20
<font color=red size =2>ORA-00027: cannot kill current session</font>
Warning: You are no longer connected to ORACLE.
SQL>
Also, user not that keen to change the name of the exe.Is cex_soc.exe client side executable? If so what prevents user from renaming it?
SY.

Alter system kill session in RAC

Hi,
After identifying all inactive jdbc sessions or blocking sessions from gv$session or gv$lock respectively, should alter system kill session executed in both instances of RAC?, Can't we execute like alter system kill session ' inst_id,sid,serial#' from a single instance to kill all the session of RAC instances?
So, above problem answered in 11g as:
Alter system kill session ‘SID, serial#, @instance_id’;
Eg: ALTER SYSTEM KILL SESSION ‘115,9779,@1';
So, In our environment, most of the databases are in 10gR1 or 10g R2. Is there any patch for 10g Where instance_id can be recognized by alter system kill session?
Thanks,
Sunil.

Hi Dan,
Not sure what you mean by "instance specific kill session capability".
To be clear, I'm speaking of a new feature, introduced in 11gR1, that provides for an optional third parameter to 'alter system kill session', which allows you to kill a session on a remote instance, in a RAC environment.
Documentation is here:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_2013.htm#i2065117
-Mark

Trace File Created Upon Execution of "alter system kill session sid, serial# immediate;"

A problem within a third-party application is causing it to create and abandon Oracle sessions. At times three hundred or more abandoned sessions accumulated in the instance. The software company is working on the problem. Oracle's background processes will get rid of those sessions after several hours, but at times there were so many they caused the server to start using paging space. We wrote a SQL*Plus script to identify the abandoned sessions and kill them with command "alter system kill session <sid, serial#> immediate;". We automated the execution of the script a week ago. Today I noticed that in my udump directory an Oracle trace file has been created each time our script kills a session. A single trace file is created regardless of how many sessions are killed. No errors appear in the trace file.
Is the creation of these trace files an indication that problems have occurred or are they there for information only?
Since I know how and why the sessions are being killed, is it safe to ignore the trace files?
Thank you,
Bill

The OS is AIX 5.2. The database server is 10.2.0.2. We are in the processing of upgrading to AIX 7.1 and database server 11.2.0.3.6.
The script does not enable tracing for the SQL*Plus session.
Below is the alert log message from a session killed at 11:22, and the corresponding trace file created at that same time:
From alert_<sid>.log:
Wed Jul 31 11:22:01 2013
Immediate Kill Session#: 1119, Serial#: 59885
Immediate Kill Session: sess: 70000014dc4a7e0 OS pid: 267254
/u02/admin/EXPRESS/udump $ ls -l express_ora_113358.trc
-rw-r----- 1 oracle dba 2276 Jul 31 11:22 express_ora_113358.trc
/u02/admin/EXPRESS/udump $ pg express_ora_113358.trc
Dump file /u02/admin/EXPRESS/udump/express_ora_113358.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /u01/app/oracle/product/10.2.0
System name: AIX
Node name: navis
Release: 2
Version: 5
Machine: 0005CD8C4C00
Instance name: EXPRESS
Redo thread mounted by this instance: 1
Oracle process number: 225
Unix process pid: 113358, image: oracleEXPRESS@navis
*** ACTION NAME:() 2013-07-31 11:22:01.181
*** MODULE NAME:(SQL*Plus) 2013-07-31 11:22:01.181
*** SERVICE NAME:(EXPRESS.WORLD) 2013-07-31 11:22:01.181
*** SESSION ID:(1723.61000) 2013-07-31 11:22:01.181
SO: 70000014d44d278, type: 2, owner: 0, flag: INIT/-/-/0x00
(process) Oracle pid=463, calls cur/top: 0/700000139166298, flag: (0) -
int error: 0, call error: 0, sess error: 0, txn error 0
(post info) last post received: 108 0 4
last post received-location: kslpsr
last process to post me: 70000014d36c398 1 6
last post sent: 0 0 24
last post sent-location: ksasnd
last process posted by me: 70000014d36c398 1 6
(latch info) wait_event=0 bits=0
Process Group: DEFAULT, pseudo proc: 70000014d6aec00
O/S info: user: oracle, term: UNKNOWN, ospid: 267254
OSD pid info: Unix process pid: 267254, image: oracleEXPRESS@navis
Short stack dump:
ksdxfstk+002c<-ksdxcb+04e4<-sspuser+0074<-00004CB0<-nttrd+0120<-nsprecv+0750<-ns
rdr+0114<-nsdo+1714<-nsbrecv+0040<-nioqrc+04a8<-opikndf2+0688<-opitsk+088c<-opii
no+0990<-opiodr+0adc<-opidrv+0474<-sou2o+0090<-opimai_real+01bc<-main+0098<-__st
art+0090
Dump of memory from 0x070000014D2CC3B0 to 0x070000014D2CC5B8
70000014D2CC3B0 00000004 00000000 07000001 39DA8D48 [............9..H]
70000014D2CC3C0 00000010 0003139D 07000001 39166298 [............9.b.]
70000014D2CC3D0 00000003 0003139D 07000001 4C73D508 [............Ls..]
70000014D2CC3E0 0000000B 0003139D 07000001 4DC4A7E0 [............M...]
70000014D2CC3F0 00000004 00031291 00000000 00000000 [................]
70000014D2CC400 00000000 00000000 00000000 00000000 [................]
Repeat 26 times
70000014D2CC5B0 00000000 00000000 [........]
Thanks,
Bill

Batch kill session

Hi,
How can I batch kill session?
I have two related sessions in v$session by column client_info.
When os administrator kill the process, only kill the first session. I need to execute automatically the procedure:
psid number;
pserial# number;
session_killed EXCEPTION;
PRAGMA EXCEPTION_INIT(session_killed, -31);
begin
SELECT sid, serial# into psid, pserial# FROM v$session WHERE client_info = p_client_info;
EXECUTE IMMEDIATE 'alter system kill session ' || '''' || psid || ',' || pserial# || ''' immediate';
DBMS_OUTPUT.PUT_LINE('Killing user ' || psid || ', ' || pserial#);
EXCEPTION
WHEN session_killed THEN
DBMS_OUTPUT.PUT_LINE('The session ' || psid || ' has been marked to be killed');
END;
It is possible?
Help me, pls
Beatriz

Hi!
Pierre Forstmann, I have proven it, but I think that the trigger does not activate when kill becomes from the os.
-Sri, I'm executing a mapping of owb in production through a function.
The function generates one session in the data base and the call to mapping another one.
When mapping takes much, the production operators make kill process by means of a tool (controlM) that only suspends the first session.
But mapping continues executing itself because it runs under the other session.
I have related both sessions to identify them through the column client_info of v$session, now Its necessary automatically kill the second session, but I don't know how to do it.
thanks to all

Killed sessions

Similar Messages

Maybe you are looking for