Killer network manager cant enter accurate number

killer network manager on network tab asks to enter values for, in my case, dsl connection speed.
my speed is 10mbits down and 0,5 up
if i enter 0,5 for up and press apply then it rounds on 5 mbit
i can also use arrow keys, to adjust to 0.5 but same thing happens. i can manually enter 1 mbit for upload but thats 2x my speed.
killer network manager asks to enter accurate numbers for best result
mb is gaming 3 h97
my numbers are now 10,00 and 1,00
if i enter 0.50 then it rounds it on 5,00

Hi
i have antivirus but its disabled when installing, as sugested by installer.
i just uninstalled, so i dont have screenshots, but can attach them later.
when entering numbers for upload and download speed in network manager, it is in format 10,00 for 10 mbits, 100,00 for 100mbits etc.
i upgraded killer network software and now i have much bigger problem. if bandwith control is enabled, i cant connect to internet. i saw similar topics on msi forum allready.
i downgraded killer software to 1.1.39.1040 and bandwith control is working normally.
new 1.1.50 and 51 are not working.
right now i have just drivers, with no software.
so, there are two problems.
1) 1.1.50 and later not working at all with bandwith control enabled
2) cant enter 0.50 mbits in upload speed -- looks like software is accepting only 1, 2, 3 mbits values, and not 0.50, 1.50 -- which is weird because software is obviusly designed for that because you dont enter 10 mbits as 10, but as 10,00, so its logically to assume that 0.50 should work
please tell me do you still need those screenshots, i will upload them later today...
please, prepare drivers only (without killer software) for windows 10

Similar Messages

  • Killer Network Manager literally 'killing' my network

    I've recently bought the Z97M Gaming motherboard and installed the network driver that came with it.
    Unfortunately the Killer Network Manager's "Bandwidth Control" setting seems to 'kill' my whole network. With that feature enabled you are unable to access the internet via ethernet or wireless regardless of device. It seemingly also stops access to the router via the default gateway IP however I haven't tried that from a device that isn't this computer. The only way to regain access is to reboot the router.
    After spending several hours trying to diagnose the issue I finally discovered that it was the "Bandwidth Control" setting that I mentioned above so I naturally just disabled that. Unfortunately I've now found out that, despite the fact I've applied the changes with the "Bandwidth Control" setting turned off, it seems to re-enable itself when I put my computer to sleep and then power it up again.
    I can't really go forward with continually rebooting the router in order to resolve the issue, I need a fix that I can perform locally. Ideally I'd like to be able to just install the network driver without installing the Killer Network Manager but it doesn't seem like MSI offer that option. The only other option that I can think of is to change something on my computer or on the router. The router is the Super Hub 2 / 2ac from Virgin Media.
    Thanks in advance and please let me know if you require any further information.

    Quote from: Svet on 14-January-15, 11:59:51
    do you use latest killer suite drivers 1.1.49.1068 ?
    Sorry probably should've included that in my original post.
    Yes I'm on 1.1.49.1068 on Windows 7 64bit.
    Quote from: TZBC on 14-January-15, 13:19:38
    MSI website provide the Killer Network Driver without KNM
    check this out
    removed because I can't post links...
    I did look on MSI's site and, for some reason, that driver isn't listed on the UK site (can't post links but just append uk. before msi.com).
    I assume there's not going to be any locality issues with installing that driver and it's just an oversight that it isn't on the UK site?

  • Cant enter last number on serial for elements12 wind0ws 7 ?

    cant enter last number on serial for elements 12 windows ?

    there are 6 groups of 4 digits in the serial or 24 digits.
    how many are you trying to enter?
    if different from the above, Find your serial number quickly

  • Killer Network Manager Keeps Saying To Install Flash.

    I just put to together my rig and im slowly updating and running it through its paces, I have a MSI Z87-GD65 Gaming I have the latest drivers so far the only thing I haven't updated is the bios. Flash is installed but the MSI Killer Network Manager keeps saying that I need to install flash when I try to test the networks speed. Anyone else had this issue in the past?

    Quote from: Maja199 on 11-April-14, 02:33:05
    If you install the flash player through the internet explorer it should work.
    That's right.
    http://get.adobe.com/flashplayer/otherversions/
    There are 2 Flash player installation packages:
    1) for Internet Explorer (and Google Chrome)
    2) for other browsers (Firefox, Opera, etc).
    This amazing piece of software called "Killer Network Manager" needs the IE flash plugin.
    Otherwise its outstanding interface does not work.

  • How do I get rid ofl the "Killer Network Manager"?

    I'm never on a wired LAN, always on WiFI, so I don't need this useless "network manager" starting whenever I start Windows. How can I get it to stop starting itself?
    My laptop is a GE70 2PE 010US Apache Pro.

    Uninstall the Killer LAN driver, then follow runningman's post to install only Killer driver.
    http://dragonarmy.msi.com/forum/showthread.php?t=64228#.U3HJz4GSwuw

  • Killer network manager on Z87 GD65 motherboards

    hi
    got my self a new computer with the msi motherboard, but the killer network thing is laggin my games as hell :S if i remov it it will remove the drivers to the lan card aswell... i have win 7 64bit.. can someone help me plz

    Use the pure drivers: >>Killer's network drivers only [without software suite]<<

  • Blue Screen caused by Killer Network Manager on MSI GS70 Stealth 970m 6GB

    The GS70 always gets the blue screen when booting up then it restarts. After the restart it does not blue screen anymore. I've almost found my answer from these people https://forum-en.msi.com/index.php?topic=178064.0 yet I cannot install another Wifi adapter since there is none available for my laptop unless it's the stock Killer wireless- n/a/ac 1525 Wireless network adapter. I can confirm that the Blue screens are caused by the Killer Wireless because when I uninstalled it. There were no more blue screens. I just want help since I am tired of my laptop blue screening everytime I boot it up. Please help me and thank you so much.

    Hi,
    I guess your OS is not MSI OEM Windows?
    What's your current LAN driver version?
    MSI mainboard download page has a newer Killer driver, give it a try.
    Killer Network Driver 1.1.50.1073
    http://www.msi.com/support/mb/X99S-GAMING-9-ACK.html#down-driver&Win8.1 64

  • Re: Internet connection issues on GT60/GT70 caused by Killer Network Manager

    How do I uninstall the correct driver before installing this one? when I try to run the .exe I get an error saying "Error reading setup initialization file"

    Try using the BigFoot Cleaner or Revo Uninstaller to remove old drivers, then install the new driver version. Revo will do a more thorough job of removing Killer's orphaned files and registry remnants.

  • Application BUG in Killer Network Manager

    I am using the MSI Z87-GD65 Gaming with the integrated Killer NIC E2200. The problem is, the last few versions of the Killer Suite were rather useless for me, cuz I can't use the bandwidth control anymore. Since Qualcomm broke up with Ookla I have to adjust the upload and download speed manually, but I can't do it anymore.
    If I try to adjust upload speed to 0.37 Mbs and download speed to 2.97 Mbs and try to apply the changes, the bugged software changes the values to 37,00 Mbs (up) and 297,00 Mbs (down).
    Did anyone else notice such a behavior?
    By the way: Before I have posted in this forum, I'd checked the Qualcomm website. My plan was to submit a ticket but the whole killer technology section is gone!!! oO

    @Svet: I would love to, but....http://www.qca.qualcomm.com/products/killer-technology/support/

  • Killer Network Manager Problem

    Hy guys i've a problem with this program..i can't see the application installed on my pc
    Have you any idea to resolve this problem ?

    No need of 2 threads about same issue!
    Continue your #1 one
    https://forum-en.msi.com/index.php?topic=250713.msg1441395#msg1441395

  • Installing Killer Network Manager error 1603 GT70 0NC

    HI,
    I have a MSI GT70 0NC, trying to install Qualcomm driver on Win8 64bit. I keep getting the message "Error -1603 Fatal error during installation."
    I can't find a solution to this issue that works anywhere online.
    Any ideas?
    Cheers.

    Solved by downloading driver directly : http://www.killergaming.com/support/Downloads?category=3&model=123&download_type=1&os=16

  • Killer network settings on Z87-G45

    Anyone is having problems imputing the Internet Provider Speed in the Killer Network Manager using decimals?
    For the life of me, every time I put either 2.5 or 2,5 and hit apply, it turns into 25 Mbps. Only option is to use whole numbers like 2 or 3 Mbps. Using the latest driver found on MSI's Z87-G45 board website, 1.0.30.1003 for the network drive.

    The best decision is to remove Killer suite and just using the pure driver. Use the >>Bigfoot Network cleaner tool x64<< to remove current Killer driver and reboot. Install >>this<< driver instead.

  • Msi killer network e2200 problems

    Please help! I have a Msi apache laptop with the killer network manager. The network manager, when opened to the applications tab does not show any applications! I have reinstalled the driver and still doesn't work. Any suggestions?

    RX8 you are really good guy to help us, thanks for clear explain!
    Quote from: RX-8 on 07-January-15, 11:37:20
    Hello Joebunke,
    I borrowed an GE60 2PE too and had a clean-installed Windows 8.1.
    Then I installed all Windows 8.1 drivers from MSI website (http://www.msi.com/support/nb/GE60-2PE-Apache-Pro.html#down-driver).
    My application page works normally when I opened up and there're already some processes shown in the window.
    Did you mean it's all empty?
    Did you try selecting "Show All Applications" or "Reset Application Data"?

  • Msi ge60 SCM, KIller netowrk management and screen problem.

    hi i have 3 little problems with my ge60 i really need help on them!
    1. The intel graphics and media control, which i increase the contrast and stuff to my like but as soon as i put the computer on sleep mode or go for 10 minutes the options go back to default! i really tried everything!
    2. THe killer network management  i really do not know how to use it but i know that in applications something should appear and it does not:
    here my network and advanced:
    could u provide a tutorial link on how to use cause im lost!
    3. and for last the SCM sistem control manager which i intalled again from the msi webpage and give me a net framework error:
    I really apreciate your help! thanksss!

    THE scm problem has been fixed any idea with the other 2? thanks!

  • MSI Z87 Gaming, Killer Networking offline

    The killer network is enabled and connected but when I use the Killer Network Manager i get the following
    Any help?

    check KILLER E2200 GAME NETWORKING info at:
    http://www.msi.com/product/mb/Z87-G45-GAMING.html#hero-overview

Maybe you are looking for

  • Problem with iTunes and PrintScreen

    I have a lil' problem. When a song is playing in iTunes, and while it is playing, I push printscreen and my computer makes a strange sound and the music stops playing. It will only start playing again when i move the printscreen img file to the trash

  • Thumbnails of Adobe  Illustrator CS2 have disappeared

    I noticed that all of the Adobe Illustrator CS2 thumbnails have turned into just generic icons. This is pretty useless if you have files to browse through and you want to see the thumbnails in Spotlight or Finder. I can see thumbnails in Adobe Bridge

  • How to make collapsible pages in a Swing Panel?

    Hi All, I have a JPanel in swing where I want elements which can be collapsed and expanded like in igoogle. These when expanded, can contains inside them subcomponents which can be labels, textfields, lists or trees!! Once collapsed, only the overall

  • Need Help Creating Sound and Subtitle Setup Menu Scripts

    Can someone point me to a tutorial or assist me with completing this menu: http://www.aviewofyou.tv/mule/setupmenu.jpg Basically, the user gets to pick their audio in stereo or 5.1 as well as whether or not the want to see the subtitles. So it would

  • Is it possible, if so how

    I have a small requirement like. I need to write a "C" function which takes two parameters.one is a sql script file and another is the out file that contains the result after execution of sql script. here my doubt is whether we can run the *.sql dire