Killer Network Manager Keeps Saying To Install Flash.

I just put to together my rig and im slowly updating and running it through its paces, I have a MSI Z87-GD65 Gaming I have the latest drivers so far the only thing I haven't updated is the bios. Flash is installed but the MSI Killer Network Manager keeps saying that I need to install flash when I try to test the networks speed. Anyone else had this issue in the past?

Quote from: Maja199 on 11-April-14, 02:33:05
If you install the flash player through the internet explorer it should work.
That's right.
http://get.adobe.com/flashplayer/otherversions/
There are 2 Flash player installation packages:
1) for Internet Explorer (and Google Chrome)
2) for other browsers (Firefox, Opera, etc).
This amazing piece of software called "Killer Network Manager" needs the IE flash plugin.
Otherwise its outstanding interface does not work.

Similar Messages

Windows 8 and keeps asking to install Flash Player

I have Windows 8 and keep getting this message, "Please install the latest Flash Player" and i won't let me update?

When I attempt to update it says it is already installed embedded in IE
Windows 8. When i go to Windows update page it does not have Flash Player as
an update just Bing.
In a message dated 9/19/2013 12:48:58 A.M. Pacific Daylight Time,
[email protected] writes:
Re: Windows 8 and keeps asking to install Flash Player
created by Pat Willener (http://forums.adobe.com/people/pwillener) in
Installing Flash Player - View the full discussion
(http://forums.adobe.com/message/5695168#5695168)

Killer Network Manager literally 'killing' my network

I've recently bought the Z97M Gaming motherboard and installed the network driver that came with it.
Unfortunately the Killer Network Manager's "Bandwidth Control" setting seems to 'kill' my whole network. With that feature enabled you are unable to access the internet via ethernet or wireless regardless of device. It seemingly also stops access to the router via the default gateway IP however I haven't tried that from a device that isn't this computer. The only way to regain access is to reboot the router.
After spending several hours trying to diagnose the issue I finally discovered that it was the "Bandwidth Control" setting that I mentioned above so I naturally just disabled that. Unfortunately I've now found out that, despite the fact I've applied the changes with the "Bandwidth Control" setting turned off, it seems to re-enable itself when I put my computer to sleep and then power it up again.
I can't really go forward with continually rebooting the router in order to resolve the issue, I need a fix that I can perform locally. Ideally I'd like to be able to just install the network driver without installing the Killer Network Manager but it doesn't seem like MSI offer that option. The only other option that I can think of is to change something on my computer or on the router. The router is the Super Hub 2 / 2ac from Virgin Media.
Thanks in advance and please let me know if you require any further information.

Quote from: Svet on 14-January-15, 11:59:51
do you use latest killer suite drivers 1.1.49.1068 ?
Sorry probably should've included that in my original post.
Yes I'm on 1.1.49.1068 on Windows 7 64bit.
Quote from: TZBC on 14-January-15, 13:19:38
MSI website provide the Killer Network Driver without KNM
check this out
removed because I can't post links...
I did look on MSI's site and, for some reason, that driver isn't listed on the UK site (can't post links but just append uk. before msi.com).
I assume there's not going to be any locality issues with installing that driver and it's just an oversight that it isn't on the UK site?

Killer network manager cant enter accurate number

killer network manager on network tab asks to enter values for, in my case, dsl connection speed.
my speed is 10mbits down and 0,5 up
if i enter 0,5 for up and press apply then it rounds on 5 mbit
i can also use arrow keys, to adjust to 0.5 but same thing happens. i can manually enter 1 mbit for upload but thats 2x my speed.
killer network manager asks to enter accurate numbers for best result
mb is gaming 3 h97
my numbers are now 10,00 and 1,00
if i enter 0.50 then it rounds it on 5,00

Hi
i have antivirus but its disabled when installing, as sugested by installer.
i just uninstalled, so i dont have screenshots, but can attach them later.
when entering numbers for upload and download speed in network manager, it is in format 10,00 for 10 mbits, 100,00 for 100mbits etc.
i upgraded killer network software and now i have much bigger problem. if bandwith control is enabled, i cant connect to internet. i saw similar topics on msi forum allready.
i downgraded killer software to 1.1.39.1040 and bandwith control is working normally.
new 1.1.50 and 51 are not working.
right now i have just drivers, with no software.
so, there are two problems.
1) 1.1.50 and later not working at all with bandwith control enabled
2) cant enter 0.50 mbits in upload speed -- looks like software is accepting only 1, 2, 3 mbits values, and not 0.50, 1.50 -- which is weird because software is obviusly designed for that because you dont enter 10 mbits as 10, but as 10,00, so its logically to assume that 0.50 should work
please tell me do you still need those screenshots, i will upload them later today...
please, prepare drivers only (without killer software) for windows 10

My new Macbook won't connect to my wifi network - it keeps saying "password incorrect" - but I've tested it on my phone and works fine, I've checked the password I enter is correct digit for digit - what could the problem be?

My new Macbook won't connect to my wifi network - it keeps saying "password incorrect" - but I've tested it on my phone and works fine, I've checked the password I enter is correct digit for digit - what could the problem be?

you need to open the keychain access located in your utilities folder in the applications and once in the keychain on the left side click on the words system at the top and in the lower section click on passwords
next look in the striped area for any passwords that say airport network password next to kind and highlight those and hit delete on the keyboard to remove them from the keychain.
once you remove all of these airport passwords, quit the keychain
turn wifi off then back on, select your wifi network from the list and enter the password telling it to save to keychain this should resolve your issue!

I keep having to install flash player 11 every time i play games.whats wrong?

Almost every day i am playing one zinga game or another.during an upload of an game it will freeze and i will be asked to download the newest adobe flash player so the game will function properly.the rest of that day every thing will be fine.the next day the same thing will happin again.the download always works fine and the games all function fine after the download.this has happined four times now.i am an little confused and concerned.

windows seven with all of the up dates to this time point.i use
internet explorer ie9.but i also use google chrome and am finding my game play to work just fine on google.also i was just trying to take an survey and the site told me that i did not have the latest flash player installed and was asking me to download it.that would make it about eight times now.
From: ʇɐb ɹəuəllıʍ <[email protected]>
To: prhuds00 <[email protected]>
Sent: Tuesday, November 8, 2011 5:09 PM
Subject: i keep having to install flash player 11 every time i play games.whats wrong?
Re: i keep having to install flash player 11 every time i play games.whats wrong? created by ʇɐb ɹəuəllıʍ in Installing Flash Player - View the full discussion
What is your operating system & version?
What is your web browser & version?
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015076#4015076
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015076#4015076. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Network Manager keeps asking for WPA passphrase

Hi, I finally managed to install arch on my netbook, everything seems to be in working order apart from my wireless connection..
I've installed and configured the broadcom drivers for my card from the AUR and both the access points I usually connect to (under windows/ubuntu) are visible.
firstly I tried to connect to my access point using wicd, it appears to work until it trys to validate the connection and eventually returns the error:
'Connection Failed: Bad Password'
im 100% certain i have entered the passphrase correctly.
I googled around, to find some people are having similar problems - i couldnt find a complete solution to my problem but a lot of people were linking to wicd-bzr. I have the same problem using wicd-curses..
next i decided to try NetworkManager, I uninstalled wicd and installed networkmanager 'pacman -S network-manager-applet'
again, the manager displays all available access points, i try to connect to my router and it repeatedly asks for my passphrase and never manages to connect.
does anyone has any ideas?
im using xfce4 (i also tried in gnome), the broadcom device is B4312, and the network security is WPA. Cheers.

Same problem here, tested with Wicd (also wicd-bzr), Netcfg and NetworkManager.
Tried wpa_gui, the event history keep saying:
WPS-AP-AVAILABLE
Trying to associate with [MAC-ADDRESS] (SSID)
Authentication with [MAC-ADDRESS] timed out
CTRL-EVENT-SCAN-RESULTS
Edit: sorry, i forgot to paste wpa_supplicant output with -d flag:
[root@hydra log]# wpa_supplicant -ddd -Dwext -iwlan0 -c/etc/wpa_supplicant.conf -B
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='network'
update_config=1
Line: 5 - start of a new network block
ssid - hexdump_ascii(len=21):
46 41 53 54 57 45 42 2d 31 2d 50 41 32 37 32 39 FASTWEB-1-PA2729
30 31 35 4d 41 015MA
PSK (ASCII passphrase) - hexdump_ascii(len=21): [REMOVED]
proto: 0x2
key_mgmt: 0x2
pairwise: 0x8
auth_alg: 0x1
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Line 12: removed CCMP from group cipher list since it was not allowed for pairwise cipher
Priority group 0
id=0 ssid='FASTWEB-1-PA2729015MA'
WEXT: cfg80211-based driver detected
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf flags 0x0
netlink: Operstate: linkmode=1, operstate=5
Own MAC address: 00:13:02:10:34:2e
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): a6 20 a7 e6 1e b5 58 c3 92 4f 1e 08 8d 27 ba 7a
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
ctrl_interface_group=90 (from group name 'network')
Added interface wlan0
Daemonize..
My wireless card is a Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
Router is a Linksys WRT320N, configured with WPA2 Personal, Encryption AES or TKIP
Last edited by morgenstern (2010-11-19 18:41:58)

Keeps asking to install Flash PLayer when I already have??? Help Please!!!

Flash player worked perfectly fine on my computer and I've had it for about 2 years. But now for the past 2 weeks whenever I turn off the computer or log off the next time I sign in it says I need to install flash player. I have installed it many times but it keeps doing the same thing. I'm tired of installing it everyday so some one please help!!

Hi Gagan, Thanks for the info. You say sometimes the DLM will appear. If you can remember, was it used the last time that you uninstalled and installed?
It is supposed to install the FP and then disconnect, but sometimes it does not.
My suggestion would be to uninstall per http://kb2.adobe.com/cps/141/tn_14157.html This is the offline Uninstaller.
Pay close attention to the last part of this article about rebooting when using IE.
This is the offline Installer :
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
Download the Installer and run from your desktop after the Uninstaller is finished. Be sure to not have any Flash running,
close all browsers, check system tray, etc.
Just read over the instructions carefully regarding Security Settings, Permission issues, Norton Security, etc. before Installing.
If you have any questions prior to uninstalling/installing, just post.
Thanks

How do I get rid ofl the "Killer Network Manager"?

I'm never on a wired LAN, always on WiFI, so I don't need this useless "network manager" starting whenever I start Windows. How can I get it to stop starting itself?
My laptop is a GE70 2PE 010US Apache Pro.

Uninstall the Killer LAN driver, then follow runningman's post to install only Killer driver.
http://dragonarmy.msi.com/forum/showthread.php?t=64228#.U3HJz4GSwuw

Firefox keeps asking to install Flash. When I attempt this, I get an error message stating it failed. Flash works in Google Chrome, but not FF.

I don't know what happened but Firefox keeps asking me to install Flash. When I attempt to install the program, I get an error message that it has failed. There is no other information given and I'm just left hanging. I've tried this over twenty times with the same results. I've even uninstalled and re-installed Firefox, but this continues. I'm unable to watch any YouTube videos. I then installed Google Chrome and all is working fine. I can't stand the Google company though and really with I could continue using Firefox. Why is GC working for me any FF not? How can I fix this?

Google Chrome comes with its own Flash plugin, so doesn't require to install Flash separately.
You can find the latest Flash player versions for Firefox on this page.
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
You may have to run the Flash installer as Administrator (right-click: Run as Administrator) and make sure that Firefox and possibly other browsers are closed.

CS5 Update Manager keeps trying to install old updates

Yesterday I installed CS5 Master Collection on a replacement computer and used "Check for Updates" in Photoshop to download and install the latest versions. That went fine, but only updated Photoshop to 12.0.4 and Illustrator to 15.0.2. I manually downloaded and installed the PS 12.0.5 and AI 15.0.3 updates and all went well (or so I thought) - PS reports 12.0.5 and Illustrator reports 15.0.3 in their "About" dialogs.
Tonight I found an Adobe Update icon in my tray and clicked it. It tells me it wants to install PS 12.0.4 and AI 15.0.2 (one patch level back on each). I let it run, figuring it would notice that everything was up-to-date. It didn't - it downloaded and tried to install those updates, reporting Update Failed for both. If I check for updates again, I am again offered those two updates.
I found this old thread http://forums.adobe.com/thread/714043 which discusses a similar issue with Dreamweaver. I tried deleting the C:\Users\username\AppData\Local\Adobe\AAMUpdater\1.0 folder and rebooting as shown in that thread, and it didn't fix the problem - the update manager keeps trying to download and install un-needed and out-of-date updates.
How do I get Update Manager to understand that these updates have already been applied? I don't want to simply disable update checks for these products, as I'll miss any future updates. And I'd rather not deactivate and uninstall all of CS5 Master Collection and reinstall if I don't have to - that seems like using a sledgehammer to squash a mosquito.

I don't want to simply disable update checks for these products, as I'll miss any future updates.
There won't be any. CS5 is now 2.5 years old and nobody goes back to support such old versions anymore when CS7 is knocking on the door. Even the .3 update was only done after heavily misinformed public outcries over that alleged major security whole with certain file types which was an utter non-issue for 90% of the users, anyway....
Mylenium

Hi I am trying to install snow leopard and it keeps saying the install will resume when it restarts but it doesnt, Help any body?

Hi I am trying to upgrade from leopard 10.5.8 to SL 10.6.3. I followed the instructions and it keeps rebooting before the install is complete. The screen says the install will continue when teh computer restarts but it doesnt, it puts me right back at the very begining. Agh help please.

Snow Leopard doesn't require a restart to install.
Are you booting from the install DVD?
Restart your MacBook holding the Option key and select the install DVD.

Blue Screen caused by Killer Network Manager on MSI GS70 Stealth 970m 6GB

The GS70 always gets the blue screen when booting up then it restarts. After the restart it does not blue screen anymore. I've almost found my answer from these people https://forum-en.msi.com/index.php?topic=178064.0 yet I cannot install another Wifi adapter since there is none available for my laptop unless it's the stock Killer wireless- n/a/ac 1525 Wireless network adapter. I can confirm that the Blue screens are caused by the Killer Wireless because when I uninstalled it. There were no more blue screens. I just want help since I am tired of my laptop blue screening everytime I boot it up. Please help me and thank you so much.

Hi,
I guess your OS is not MSI OEM Windows?
What's your current LAN driver version?
MSI mainboard download page has a newer Killer driver, give it a try.
Killer Network Driver 1.1.50.1073
http://www.msi.com/support/mb/X99S-GAMING-9-ACK.html#down-driver&Win8.1 64

Killer network manager on Z87 GD65 motherboards

hi
got my self a new computer with the msi motherboard, but the killer network thing is laggin my games as hell :S if i remov it it will remove the drivers to the lan card aswell... i have win 7 64bit.. can someone help me plz

Use the pure drivers: >>Killer's network drivers only [without software suite]<<

Installing Killer Network Manager error 1603 GT70 0NC

HI,
I have a MSI GT70 0NC, trying to install Qualcomm driver on Win8 64bit. I keep getting the message "Error -1603 Fatal error during installation."
I can't find a solution to this issue that works anywhere online.
Any ideas?
Cheers.

Solved by downloading driver directly : http://www.killergaming.com/support/Downloads?category=3&model=123&download_type=1&os=16

Killer Network Manager Keeps Saying To Install Flash.

Similar Messages

Maybe you are looking for