Killer NIC with ASUS R9 290 black screen issues

Hi there,
I've just set up a gaming system with the B85-G43 Gaming board and an ASUS R9 290 (oc r9290-dc2oc-4gd5) and I've stumbled across a strange problem. Within 5 minutes I get a black screen and the only way to get out of it is to reset my computer. It freezes, but doesn't stop working immediately.
So... I've been testing with W7, W8 and W8.1 and no difference. Until... I shut down my network card and no black screens anymore. Also, when I disable my R9 290 in the device manager there are also no black screens anymore. So I should search it in the combination. I've installed all the newest drivers, but no luck.
Has anyone come across the same issue and how did you solve this? I'm getting really frustrated about it...
Thanks for your help guys!

Quote from: Nichrome on 20-January-15, 19:56:04
There is no chance this will work together.
Radeon R9-290 - 31A and a 550W psu minimum
Test stronger power supply. And that might be why you also have issues with other things like in this case, Killer NIC
Ok I've tested your suggestion and replaced the PSU with a cooler master G750M 750 Watt.
Exactly the same problem. I keep getting black screens as soon as I log into windows and the radeon drivers are kicking in. When i disable the radeon drivers: no black screens at all. As soon as i re-enable them: black screen...
Anyone have any other suggestions. Currently I've RMA'd my Asus R9 290. Maybe it'll help but I don't have any confidence....
Thanks!

Similar Messages

IPad2 with iOS7 shows only black screen. Cannot restart. What do we do.

iPad2 with iOS7 shows only black screen. Cannot restart. What do we do.

Try a reboot:
press and hold the home and power buttons until the Apple icon is displayed, then let go.

The Windows 7 Black Screen Issue

I am putting in Bootcamp with a Windows 7 install. I checked these forums and made sure I had all my prep work done.
I referenced article TS3173 and downloaded the neccessary drivers for 7, formatted a 16GB SD Card as FAT Bootable and copied the drivers and autounattend.xml files onto the root of the drive.
THe installation as going as planned but at the end I'm still ending up with a black screen. Windows is installed ok but on the restart after" Preparing for FIrst Use" comes up the screen goes black.
Obviously, the drivers are not being installed from the SD card, I tried it on a USB External driver as well. Am I missing something here? I read every post I could find on it and I can't see where I am doing anything incorrectly.
Thanks
Tom

You don't need Paragon or another NTFS driver. That may work (I've used it, but I was using a full hard drive anyway to begin with).
Apple's method:
http://www.apple.com/support/bootcamp/
*My iMac (27-inch, Late 2009) displays a black screen during installation of Microsoft Windows 7 using the Boot Camp Assistant. How do I fix it?*
The Windows 7 installer does not include required graphics or Bluetooth drivers for this computer. To obtain the necessary drivers and resolve the issue, see this article (creating the SD card and drivers for the "black screen" issue).
http://support.apple.com/kb/HT3986
http://support.apple.com/kb/TS3173

Air 3.3 beta PC audio distortion / Air 3.1 / 3.2 Mac black screen issue

Hi there,
I've recently released a large game coded in Flash Builder with Air (www.lonesurvivor.co.uk), and I used Air 3's captive runtime feature to bundle it for Mac and PC.
The initial build used Air 3.2 and for a large proportion of OSX users, there were no visuals at all, just sound and the game obviously working underneath. This caused a very large support issue, and took several weeks to deal with, as well as having to maintain a seperate Projector version for those for whom the Air version wouldn't work. I wish I had known that the game would fail on some Macs, but unfortunately the issue showed up on none of the ones tested.
I'm about to launch the updated build of the game which uses Air 3.3 beta 1, as it seems to fix the black screen issue for all those who experienced it. I was very happy that Adobe have managed to iron this out, even if there was no response to the bug I entered into bugbase.
The problem is, on a final test on XP SP2, the 3.3 beta version produces what appears to be filtered graphics... which is how the Mac version has always appeared, but the PC version of the game seemed to use what looked like nearest-neighbour sampling in Flash's fulllscreen upscaling, which looked good for the zoomed pixel art in this game.
This is a small cosmetic issue, but there is another one whhich is far more severe - the audio has become extremely distorted, and is now unlistenable.
So with 3.2 giving me no visual on Macs and 3.3 giving me unlistenable audio on PCs, I will now have to maintain two versions again. I really would like to keep one project I can quickly make changes to, but the seperate problems in different platforms means I lose out on the great cross-platform functionality of Air. I'm hoping this is a known issue, but I couldn't find it on google / bugbase / these forums.
Could these two issues be related - is hardware acceleration not working or something? Somehow I think it is, because the XP test machine is quite old, and tended to fall over with the game running in software mode in a Flash projector.
I tried swapping out the Air 3.3 runtime for the previous 3.2 I shipped with, and editing the XML desciption to make sure it was set to use that and, sure enough, the game worked as it did before. So there is definitely something up with the beta. I'm just glad I caught this problem before I shipped as going to save me thousands of emails of support!
So I guess my question is - is this a known issue? And if so, do you have any workarounds / or are Adobe working on a fix?

Hi Chris,
Thanks for the prompt response - I guess I should have tried the forums instead of the bugbase last time... It really was a support nightmare! Not least because I had to deal with the problem of saved games being wiped by over-zealous browsers on the backup Projector version I was supplying Mac customers with.
Fortunately the Mac Air 3.3 runtime works great.
Out of interest - there is still the difference in GPU scaling used between Mac and Windows though, which there always has been since it was introduced (is this a known issue btw?)
Which leads me to the 3.3 beta 2 - I tried it out last night, and while it corrected the blurry graphics (the scaling appeared nearest neighour again on XP), the audio suffered the same distortion.
In addition, I had several other XP / Vista / Win 7 users test out the build, and the user with XP SP3 also suffered the issue.
So I'm planning to ship the PC version with 3.1 as it worked well for the first release, and use 3.3 beta 1 for the Mac version. Unfortunately I've run out of time and need to get it out there!
I'd definitely be interested in getting into the pre-release program. I'll write you an email and send the builds of the game too.
Cheers,
Jasper

R9 290 Black screen with p67-c45 b3

Hi i have p67 c45 b3 1.j version and i have bought a r9 290 but when i turn on the pc i receive black screen " no signal " from the tv...
i saw that probably is a problem about Bios, it is possible?

Quote from: andry.salerno on 30-April-15, 12:12:19
P67-c45 B3
I5 2500K
Sapphire tri-x r9 290
Even if you don't have an IvyBridge CPU, for R9-290 you need a 5.X BIOS:
http://www.msi.com/support/mb/P67AC45_B3.html#down-bios
Be aware: the BIOS update from 1.X to 5.X is problematic (for your Core i5 2500K)!

Sun Rays with VDI 3.1 - Black screen after periods of inactivity

Running VDI 3.1 with bundled versions of SRSS on three servers in a cluster running Solaris 10 with VSphere as a desktop provider - also using meta-kiosk with all smartcards configured to run "VDA" script when inserted, DTUs require registered cards.
Bit of a strange issue that is unfortunately not always reproducible:
After what seems a random period after having removed a smartcard from a DTU (if still logged into a Windows session, or after disconnecting it) sometimes as short as 20mins, sometimes only after overnight, upon reinserting the card, the VDI login screen does not always appear immediately (as should happen), but instead a black screen with a moveable mouse pointer is shown. This persists for almost exactly 2 minutes whenever it happens, then the VDI screen appears. If you manually kill the session from the admin web-interface and power-cycle the Sun Ray, it will pop up immediately as expected.
At times, the VDI screen does simply appear immediately as expected, at others this 2-minute black screen first...
You can often force the behaviour on a working VDI login screen by choosing "More options - Quit" - this will often trigger the black screen/2 minute delay. At other times quitting in this manner does not reproduce the error and the VDI login screen appears immediately.
I've researched this for a couple of weeks, and a lot of bugs mentioning "black screens" pointed towards problems with uttsc-bin - I've already applied the patch here: http://sunsolve.sun.com/search/document.do?assetkey=1-21-143215-03-1 to no avail.
I assume that it possibly is nothing to do with the Windows connector, since it's really the VDI login screen that is not appearing in a timely manner and Windows logins/sessions always start/resume immediately after logging in from the VDI screen.
Can anyone offer any help?

Never figured out what was causing this, but an upgrade to VDI 3.2 has fixed it (for now at least!)

Problem with X -config (freeze + black screen)

Hi, everyone. I'm a newbie in linux, so dont punch me .
I was following the beginners guide & after X -config /root/xorg.conf.new got freeze + blackscreen (alt + ctrl + bckspc or alt + Fn dont works).
I have created /X11/xorg.conf & can start X server, but X -config /root/xorg.conf.new or /etc/X11/xorg.conf gives black screen (with signal).
My VGA is HD3850.
Any ideas how i can fix it?
Here is my xorg.conf
Section "ServerFlags"
Option "AllowEmptyInput" "off"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Razer" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "InputDevice"
Identifier "Razer"
Driver "mouse"
Option "Name" "Razer Lachesis Optical Mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "Buttons" "9"
Option "Resolution" "1250"
Option "ZAxisMapping" "4 5"
Option "ButtonMapping" "1 2 3 6 7 8 9"
Option "Emulate3Buttons" "true"
Option "SampleRate" "1000"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "microsoftmult"
Option "Xkblayout" "us,ru"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RV670PRO [Radeon HD 3850]"
Option "AccelMethod" "exa"
Option "DRI" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "Extensions"
Option "RENDER" "enable"
Option "DAMAGE" "enable"
Option "Composite" "enable"
EndSection
/var/log/Xorg.0.log contain no errors or warnings (except ACPI & font paths)
Thx 4 help.
P.S Can add log if it helps
P.P.S Its one of my xorg.conf files, also i've used variant 4 xf86-video-ati
Last edited by InsaneDevice (2010-02-27 06:32:32)

My english is fine (i read well at least) .
At first message i said
I have created /X11/xorg.conf & can start X server...
I =can= start x server --- its mean that startx works fine & i can see 3 windows with clock . And if you mean that i dont want use x -config, then for what all this manipulations with reinstalling was?
Besides "Xorg -configure" & "x -config /etc/xorg.conf" are different things for me, because one create the basic config, while second test this config. So i thought you mean that i have to create it from scratch without using any commands
... Damn.. i just have read english & russian beginner guides. Russian says: "after installing xorg u have to create conf file, using Xorg -configure, then test it with command X -config /root/xorg.conf.new & IF IT WORK - copy to /etc/X11/xorg.conf. I didnt find that in english version .
Well, thank you for your patient & help . I think, that problem is solved (i think - say me if i wrong)
But i still want to know, why x -config /etc/xorg.conf give me that black screen + freeze, so if anybody knows - plz, message me.
Last edited by InsaneDevice (2010-03-01 07:36:42)

I need help with my K7N2G-ILSR Black screen

hey!
I need help with my Mainboard!
All the time when i want to start it it doesn't boot. You can listen to the noise of the fan and it is working but only black screen, also the LED says that the Ram is damaged red-green-red-red!
I have an Athlon XP 2400+
Volcano 9 Fan
512MB ram Kingston PC2700
512MB Ram Infineon PC2700
I read that the board doesn't support Kingston the first time and also i set the jumpers cleared CMOS and put the battery out. Also I put the Ram in different Dimms but still the same error.
The other things what i have aren't really important just that i have an enermax 431Watt. MSI wrote me that i have to put out the mainboard out of the case but why should i do this, the case is open right now and normally that shouldn't change anything. I read also some posts here and about new Ram but maybe there is someone who knows whats going on!
thanks for the reply to everyone
Regards
Jan(It's german say it like Yan)

i can't even look on the screen because the screen is black, and how can I change the timings manualy from ram? man, i never heard about that I mean it's easy to overclock a cpu but how are you changing the timings of the Ram! If u can give me a webpage snf i will lock for it, or just descibe me how to do it, thanks a lot for the replies!

DSRM black screen issue with 2012R2 DC running on 2012R2 Hyper-V

Hi!
I have been testing AD disaster recovery with few domain controllers (Server 2012R2), running on Server 2012R2 and Hyper-V. Everything OK unless I try to log in to Domain Services Recovery Mode.
After username&passwd screen goes all black and nothing happens. Every time, every server (tested this with 3 different HP workstations, one HP ML350G6 server and one laptop). Hyper-V virtual machines tested both gen1 and gen2.
With 2008R2 Hyper-V and same domain controller on it everything works fine. This makes systemstate restore bit more difficult.
Am I missing something or is it just a bug? Googling didn't help this time.

Hi makapaka471,
"I managed to made this "black screen" with non virtualized operating system as well when I was testing it with 10 computers and booting them to DSRM. All identical machines, installed from same source. "
It shouldn't happen .
Did you try to download a new ISO then test it again ?
I will test that and update .
UPDATE:
I installed a server 2012r2 DC on hyper-v 2012r2 , backed up the system state and then restored it back , it worked well when running DSRM .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

R9 270x Gaming 2G with B84-G43 Gaming Black Screen running win 8.1

Hi,
My system was win 7, upgrade to win 8.1 clean install with AMD Catalyst™ 14.4 for a day then problem occur the same way which many are having "Black Screen" even restart in normal mode but not to Safe Mode.
so i decide to downgrade the system to win 7 clean install, with no display driver install/update "Microsoft Standard VGA Graphic Adapter" in high resolution the system work fine but not with MSI Graphics Driver 13.101, "Black Screen' occur during driver installation detecting VGA card.
which i believe got to be some bios malfunction during the upgrading OS & Driver. by following here i attach the link below as technical details for assistance in advance for this troubleshooting.
here is the picture for the S/N
dropbox.com/s/nglgvrh05thyppf/20140828_091530.jpg?dl=0
and
here is the current vbios version
dropbox.com/s/arrzzrbf46icpoz/Pitcairn.rom?dl=0
*(Sorry, you are not allowed to post external links.)
Thanks.

even i tried it on downgrade and upgrade motherboard bios for both OS by getting a clean/clear default setting.
by using these method, clean OS installation with each of these driver "AMD Catalyst™ 14.4, MSI Graphics Driver 13.101, and the older link by previous post" and on-board vga as main display output;
OS win7 as a result the MSI Graphics driver both version successfully install, process for reboot after the installation of the driver and log into desktop "Black Screen" meanwhile the AMD Catalyst™ 14.4 "Black Screen" during the installation of detecting VGA card.
on the other side of;
OS win8.1 as a result three of these three driver "Screen Freeze" during the installation driver process of detecting VGA card even mouse pointer can't move. picture as link below capture using smartphone;
dropbox.com/s/529wgfjya3rwsik/20140829_155756.jpg?dl=0

Crash/black s when I want to go to "slide view" with a powerpoint file (black screen)

I witness crashes when I want to go into slideshow mode of power point 2011 (version 14.0.2) . I get a black screen and I need to push the button power (It takes some time before the push power button is effective) before re-launching again all my files. Thank you for your help.

As Office (including PowerPoint) is not an Apple product, I strongly recommend asking in the Microsoft Office:Mac forums here:
Office for Mac forums
Everyone there is a Mac user AND an Office user, something you can't say about Apple's forums. You will get the fastest help there and I think you will find the contributors more than helpful.

* NEW to Boards *Blackberry 8230 with Bell hinge defective ( black screen when opening )

Hi all,
I am not sure if this is a common problem with the 8200's but after only one month of usage, the flip hinge does not turn ON the internal display when opened ( you have to play with the cover so that screen pops up ).
Any ideas as now i have to bring in for repair and it's very frustrating for a new phone.
Thanks
Message Edited by jrmtl on 09-29-2009 11:33 AM

$35 just to evaluate! I've never heard of that! I'd press them a bit about that -- after, of course, you review your contract with them concerning warranty support for you...
Can't say about a problem with the flip -- though inherently, as a mechanical connection, it would naturally be prone to wear and tear as well as stressing beyond it's design limits (whatever those are).
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

(Another) iMac G3 black screen issue

All right, I'm sure questions about the CRT going black are pretty common, but I've scoured the net for fixes and am still coming up blank. Here's the problem...
Just bought a used iMac G3, slot loader. I think it's one of the early ones, as there's no VGA port in the back under the pop-off plate to use a second monitor. The guy I bought it from knew nothing about its history other than "the screen doesn't work".
Took it home, turned it on. The power light goes on, the hard drive spins, the screen makes those CRT sounds like it's going to come on, but it's completely black. So, I hit the forums and have tried the following solutions:
1. Reset the PRAM.
2. Replaced the PRAM battery with a new one.
3. Remove the memory, then battery, then pressed the PMU button (once), waited, replaced the battery, then memory.
4. Inserted an OS 9 CD, held down C during startup. Heard it spin around, didn't do much else.
5. Gone into Firmware mode, reset the NVRAM.
6. Let it boot up, waited till the hard drive stopped spinning, pressed the power button to try to put it to sleep. Nothing happened.
7. Held the button on the side down while restarting. That may have been a bad idea, I dunno, but I was running out of things to do and figured it's probably already fried anyway. It beeped in acknowledgement, but no other changes.
Any other ideas? I've hit all the places I can think of. I don't care much about saving anything on the HD -- I have no idea what's on it anyway -- but I'd like to get this running as it's intended to be used for a non-profit. As always, I'd like to make spending cash on a replacement part a final option; it seems people jump to that conclusion prematurely pretty often but it may be about that time...
Last thing. If this thing is definitely dead, are there any parts inside worth salvaging? Maybe I can gut it and have a nice Macquarium. Any links to a good page on how to safely discharge the CRT and take this baby apart?
Thanks in advance for any tips.
iMac G3 (slot, 350?)

Hello and Welcome to Apple Discussions,
I actually successfully took one of these iMac G3's completely apart and replaced the entire CRT component, leaving all other parts inside. The CRT in my machine did work before I replaced it, but it had a " dark shadow" which grew worse as time went on (making it hard to see), so I decided to replace it with a newer one. What I recommend you do is try one last thing because you just bought it. There are "hidden" CRT controls for the brightness and contrast inside of the bottom case (two plastic knobs). From what I am reading, it sounds like the entire CRT is bad and will not power on/function properly, but you can try to adjust the brightness/contrast anyway just to be sure. The fact that you hear the CRT sounds makes me think it is possible the brightness/contrast are all the way down, which would be why you only see a black screen when powered up. To locate these knobs follow the instructions below:
1) After completely unplugged, place your iMac G3 upside down on a soft surface (such as a bed).
2) Using a screwdriver, remove the two screws located near the front end of the machine.
3) After removed, pull upward and remove the plastic housing.
4) Look for two black knobs on the sides of the machine and plug in the power cord.
5) After you hear the chime, turn the knobs back and forth to try to get a picture.
6) If you do not see a picture, your CRT or (parts that connect to it) are probably broken.
7) Remove the power cord.
8) Replace the bottom plastic housing and screw it back together.
I hope this helps you solve this issue you are having. If it does not work out, I will think of something else. Also, do you hear the start up chime and does the power light always remain lit green the entire time the machine is powered on?
Jason

Can't fix fglrx/Xorg black screen issue, no matter what I try!

I've tried everything that I can think of or find online to fix this. Please help.
I'm getting what seems to be an oft-recurring issue where Xorg simply won't start when using the fglrx driver. It boots fine with VESA or Xfree86-ati, but using fglrx I just get a black screen that won't accept any input, although ssh'ing into the box while this is happening still works.
I've been reading forum posts for *days* now trying to get this to work. I've tried every combination of 12.4/12.6 drivers, Xorg 1.11/1.12 and modeset/nomodeset kernel parameters. I definitely do not have any radeon or other DRI modules compiled into my kernel. I have an HD4200, SLiM/Xfce4, and I'm using the proper catalyst-hd234k package. The fglrx module has been compiled for my kernel and added to my initramfs, and it loads at boot. lsmod reveals its presence and does *not* show 'radeon'. I have uninstalled every video driver aside from fglrx and Xfree86-vesa. Output does not seem to be going to HDMI instead. Switching consoles/typing blindly does not work, and I need to hold the power button for 5 seconds to shutdown. I've run aticonfig --initial and tried aticonfig --acpi-services=off, too.
I've tried *all* the different tweaks that I've found to try to make a working xorg.conf, but here's what I'm trying to use now:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
#Section "Module"
# Load "extmod"
# Load "dri"
# Load "glx"
# Load "dri2"
# Load "record"
# Load "dbe"
#EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
Option "EXAPixmaps" "off"
Option "XAANoOffScreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1440x900" "1366x768"
EndSubSection
EndSection
My Xorg log seems fantastically uninformative, since it seems to show the fglrx module loading and does not report any errors:
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 19.388] X Protocol Version 11, Revision 0
[ 19.388] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 19.388] Current Operating System: Linux splice 3.5.3-1-ARCH #1 SMP PREEMPT Tue Sep 18 00:11:37 EDT 2012 x86_64
[ 19.388] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=228ebc5f-ada6-4d9c-9e93-fc645085e5cd ro quiet nomodeset resume=/dev/sda5 init=/bin/systemd
[ 19.389] Build Date: 27 August 2012 08:04:39AM
[ 19.389]
[ 19.389] Current version of pixman: 0.26.2
[ 19.389] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.389] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.389] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 18 07:02:13 2012
[ 19.496] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.769] (==) ServerLayout "X.org Configured"
[ 19.769] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 19.769] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 19.790] (**) | |-->Device "aticonfig-Device[0]-0"
[ 19.790] (**) |-->Input Device "Mouse0"
[ 19.790] (**) |-->Input Device "Keyboard0"
[ 19.790] (==) Automatically adding devices
[ 19.790] (==) Automatically enabling devices
[ 19.993] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.993] Entry deleted from font path.
[ 20.193] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.193] Entry deleted from font path.
[ 20.193] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.195] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.196] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 20.196] Entry deleted from font path.
[ 20.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.196] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 20.196] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 20.196] (**) Extension "Composite" is disabled
[ 20.196] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 20.196] (WW) Disabling Mouse0
[ 20.196] (WW) Disabling Keyboard0
[ 20.196] (II) Loader magic: 0x7c8b00
[ 20.196] (II) Module ABI versions:
[ 20.196] X.Org ANSI C Emulation: 0.4
[ 20.196] X.Org Video Driver: 12.1
[ 20.196] X.Org XInput driver : 16.0
[ 20.196] X.Org Server Extension : 6.0
[ 20.198] (--) PCI:*(0:1:5:0) 1002:9712:17aa:21b8 rev 0, Mem @ 0xc0000000/268435456, 0xd0400000/65536, 0xd0300000/1048576, I/O @ 0x00009000/256
[ 20.198] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.198] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dri2" will be loaded by default.
[ 20.198] (II) LoadModule: "extmod"
[ 20.439] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.468] (II) Module extmod: vendor="X.Org Foundation"
[ 20.468] compiled for 1.12.4, module version = 1.0.0
[ 20.468] Module class: X.Org Server Extension
[ 20.468] ABI class: X.Org Server Extension, version 6.0
[ 20.468] (II) Loading extension MIT-SCREEN-SAVER
[ 20.468] (II) Loading extension XFree86-VidModeExtension
[ 20.468] (II) Loading extension XFree86-DGA
[ 20.468] (II) Loading extension DPMS
[ 20.468] (II) Loading extension XVideo
[ 20.468] (II) Loading extension XVideo-MotionCompensation
[ 20.468] (II) Loading extension X-Resource
[ 20.468] (II) LoadModule: "dri"
[ 20.468] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.545] (II) Module dri: vendor="X.Org Foundation"
[ 20.545] compiled for 1.12.4, module version = 1.0.0
[ 20.545] ABI class: X.Org Server Extension, version 6.0
[ 20.545] (II) Loading extension XFree86-DRI
[ 20.545] (II) LoadModule: "glx"
[ 20.554] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.685] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 20.685] compiled for 6.9.0, module version = 1.0.0
[ 20.685] (II) Loading extension GLX
[ 20.685] (II) LoadModule: "dri"
[ 20.685] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.686] (II) Module dri: vendor="X.Org Foundation"
[ 20.686] compiled for 1.12.4, module version = 1.0.0
[ 20.686] ABI class: X.Org Server Extension, version 6.0
[ 20.686] (II) LoadModule: "record"
[ 20.686] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.716] (II) Module record: vendor="X.Org Foundation"
[ 20.716] compiled for 1.12.4, module version = 1.13.0
[ 20.716] Module class: X.Org Server Extension
[ 20.716] ABI class: X.Org Server Extension, version 6.0
[ 20.716] (II) Loading extension RECORD
[ 20.716] (II) LoadModule: "dbe"
[ 20.717] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 20.742] (II) Module dbe: vendor="X.Org Foundation"
[ 20.742] compiled for 1.12.4, module version = 1.0.0
[ 20.743] Module class: X.Org Server Extension
[ 20.743] ABI class: X.Org Server Extension, version 6.0
[ 20.743] (II) Loading extension DOUBLE-BUFFER
[ 20.743] (II) LoadModule: "dri2"
[ 20.743] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.811] (II) Module dri2: vendor="X.Org Foundation"
[ 20.811] compiled for 1.12.4, module version = 1.2.0
[ 20.811] ABI class: X.Org Server Extension, version 6.0
[ 20.811] (II) Loading extension DRI2
[ 20.811] (II) LoadModule: "fglrx"
[ 20.811] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 22.869] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 22.869] compiled for 1.4.99.906, module version = 8.97.2
[ 22.869] Module class: X.Org Video Driver
[ 22.871] (II) Loading sub module "fglrxdrm"
[ 22.871] (II) LoadModule: "fglrxdrm"
[ 22.871] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 22.979] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 22.979] compiled for 1.4.99.906, module version = 8.97.2
[ 22.979] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 22.979] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
[ 22.979] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 22.979] (++) using VT number 7
[ 23.041] (WW) Falling back to old probe method for fglrx
[ 23.355] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 23.449] (--) Chipset Supported AMD Graphics Processor (0x9712) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
[ 23.465] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 23.477] (II) AMD Video driver is signed
[ 23.478] (II) fglrx(0): pEnt->device->identifier=0x1cdc440
[ 23.478] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 23.478] (II) Loading sub module "vgahw"
[ 23.478] (II) LoadModule: "vgahw"
[ 23.478] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 23.488] (II) Module vgahw: vendor="X.Org Foundation"
[ 23.488] compiled for 1.12.4, module version = 0.1.0
[ 23.488] ABI class: X.Org Video Driver, version 12.1
[ 23.489] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 23.489] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 23.489] (==) fglrx(0): Default visual is TrueColor
[ 23.489] (**) fglrx(0): Option "DPMS" "true"
[ 23.489] (==) fglrx(0): RGB weight 888
[ 23.489] (II) fglrx(0): Using 8 bits per RGB
[ 23.489] (==) fglrx(0): Buffer Tiling is ON
[ 23.508] (II) Loading sub module "fglrxdrm"
[ 23.508] (II) LoadModule: "fglrxdrm"
[ 23.508] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.508] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 23.508] compiled for 1.4.99.906, module version = 8.97.2
[ 23.525] ukiDynamicMajor: found major device number 251
[ 23.526] ukiDynamicMajor: found major device number 251
[ 23.526] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 23.526] ukiOpenDevice: node name is /dev/ati/card0
[ 23.526] ukiOpenDevice: open result is 12, (OK)
[ 23.526] ukiOpenByBusid: ukiOpenMinor returns 12
[ 23.526] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 23.526] (**) fglrx(0): NoAccel = NO
[ 23.526] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 23.526] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4200 Series" (Chipset = 0x9712)
[ 23.526] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x21b8)
[ 23.526] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 23.526] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 23.526] (--) fglrx(0): MMIO registers at 0xd0400000
[ 23.526] (--) fglrx(0): I/O port at 0x00009000
[ 23.526] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 23.555] (II) fglrx(0): ATIF platform detected
[ 23.556] (II) fglrx(0): AC Adapter is used
[ 23.576] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 23.582] (II) Loading sub module "vbe"
[ 23.582] (II) LoadModule: "vbe"
[ 23.603] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 23.617] (II) Module vbe: vendor="X.Org Foundation"
[ 23.617] compiled for 1.12.4, module version = 1.1.0
[ 23.617] ABI class: X.Org Video Driver, version 12.1
[ 23.629] (II) fglrx(0): VESA BIOS detected
[ 23.629] (II) fglrx(0): VESA VBE Version 3.0
[ 23.629] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 23.629] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 23.629] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94
[ 23.629] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 23.629] (II) fglrx(0): VESA VBE OEM Product: RS880M
[ 23.629] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 23.652] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 23.652] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
[ 23.652] (II) fglrx(0): PCIE card detected
[ 23.652] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 23.652] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 23.655] (II) fglrx(0): Using adapter: 1:5.0.
[ 23.663] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 23.691] (II) fglrx(0): Interrupt handler installed at IRQ 18.
[ 23.691] (II) fglrx(0): RandR 1.2 support is enabled!
[ 23.691] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 23.692] (==) fglrx(0): Center Mode is disabled
[ 23.692] (II) Loading sub module "fb"
[ 23.692] (II) LoadModule: "fb"
[ 23.692] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.722] (II) Module fb: vendor="X.Org Foundation"
[ 23.722] compiled for 1.12.4, module version = 1.0.0
[ 23.722] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.722] (II) Loading sub module "ddc"
[ 23.722] (II) LoadModule: "ddc"
[ 23.722] (II) Module "ddc" already built-in
fglrxinfo while running Xorg without an xorg.conf gives me this:
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 135 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 12
Current serial number in output stream: 12
And in a console it tells me that it can't open display(null)... all of which I suspect is expected behaviour when the driver is not actually in use. I just wish something would tell me what's actually *wrong*, here, instead of just expecting me to magically figure out exactly the right configuration that will actually let me use fglrx.
I... I just want to be able to play minecraft. :`(
Last edited by Medlam (2012-09-18 13:48:42)

I'm sure you've tried reading https://bbs.archlinux.org/viewtopic.php?id=57084
and http://wiki.cchtml.com/index.php/Configuring
and I'm sure you've done
aticonfig --initial
I had to use https://wiki.archlinux.org/index.php/AT … leshooting, specifically the part about disabling EXAPixmaps to make my card work.
What model is your ATI card? that would help. A LOT of ATI cards were dropped from proprietary support with the Catalyst driver.

UIImagePickerController Custom Overlay Black Screen issue while using Video trimming controller

Hello Everyone ,
I have problem while opening camera in recording mode using UIImagePicker Controller with custom overlay and it should open first time properly .But when i push to next view controller and return back again to open camera at that time camera displays black screen for few time.
The Logic in the inside view controller is for VideoTrimming . For video trimming i have used "SAVideoRangeSlider" controll. SAVideoRange Silder perform task to get all thumbnail images from video which i have assign . It uses AVAsset image generator class provided by apple to get image frames from videos and it runs in background using its handler method.
Handler Method ::
[self.imageGenerator generateCGImagesAsynchronouslyForTimes:times
                                              completionHandler:^(CMTime requestedTime, CGImageRef image, CMTime actualTime,
                                                                  AVAssetImageGeneratorResult result, NSError *error) {
I have nilling all the objects related to image generator class when i came back to Camera screen. still issues of black screen occur while opening camera.
This issue occur in ios7 but not in ios6.
Can anyone have any idea about this ...Please relply me ASAP.

Hello Everyone ,
I have problem while opening camera in recording mode using UIImagePicker Controller with custom overlay and it should open first time properly .But when i push to next view controller and return back again to open camera at that time camera displays black screen for few time.
The Logic in the inside view controller is for VideoTrimming . For video trimming i have used "SAVideoRangeSlider" controll. SAVideoRange Silder perform task to get all thumbnail images from video which i have assign . It uses AVAsset image generator class provided by apple to get image frames from videos and it runs in background using its handler method.
Handler Method ::
[self.imageGenerator generateCGImagesAsynchronouslyForTimes:times
                                              completionHandler:^(CMTime requestedTime, CGImageRef image, CMTime actualTime,
                                                                  AVAssetImageGeneratorResult result, NSError *error) {
I have nilling all the objects related to image generator class when i came back to Camera screen. still issues of black screen occur while opening camera.
This issue occur in ios7 but not in ios6.
Can anyone have any idea about this ...Please relply me ASAP.

Killer NIC with ASUS R9 290 black screen issues

Similar Messages

Maybe you are looking for