Killing me softly... or how I got iWeb to work

iWeb v 1.1 didn't work. iWeb v 1.1.1 still didn't work.
I decided I had nothing to lose so I deleted my websites and then recreated the primary site. It published.
Now it works perfectly, comments and searching and all that jazz. It is a shame that I had to delete my site and start again, but if you are having difficulty with iWeb v 1.1.1 I would advise recreating the site with the new templates. Hopefully it will work for you to.

Answered

Similar Messages

How I Got iChat to Work

I finally got my iChat to work after a lot of research, especially from reading this forum. I want to thank Ralph John (Great website), Tony defcom1 (netgear suggestions), and RJ in WI (for testing my iChat connection). I want to share with the readers of this forum what I did so that it might help you. I basically had to implement practically every suggestion I found.
My equipment: mac mini with core duo and 1 GB of ram, OSX 10.4.7 connected wirelessly to a Netgear WRG614v6 router which is connected to a SBV5120 Motorola VOIP cable modem. My broadband speeds are 12Mbps download and 1.7 Mbps upload. I'm using iChat with AIM.
Quicktime preferences, streaming: changed speed to 1.5Mbps
iChat preferences, accounts, server settings: changed port from 5190 to 443. Note that you have to be logged out of AIM to change this. I did this before I learned about port forwarding so I could log into AIM.
System preferences, sharing, firewall: off. It also works with firewall on but with the correct ports opened. Click on New...select other, TCP port numbers: 5190, UDP port numbers: 5190, 5060, 5678, 16384-16403, and description: iChat. For the UDP ports, there needs to be a space after each comma.
Set up static IP addresses:
Step 1: Gather the information you'll need. You have to access your router directly via Safari by entering in the router's IP address, name and password. For the WGR614v6 it is http://192.168.1.1, name: admin, password: admin. Note: you can't change the name. The default password is admin, but you should change it.
Click Router status in the menu on the left side and write down the Domain Name server IP addresses. There are two.
Step 2: Back in my mac: System preferences, network: click Configure, click TCP/IP. For Configure IPv4, select Manually. IP Address: 192.168.1.22, Subnet mask: 255.255.255.0, Router: 192.168.1.1, DNS servers: The two you got in Step 1.
Note: I used 192.168.1.22 for my mac mini, 23 and 24 for two other PCs on the network and 100 for my network printer. Other numbers will also work.
Step 3: Back in the Netgear router settings: Click on LAN IP Settings: Uncheck Use Router as DHCP server.
At this point, check to see that you still have internet access. Otherwise, recheck your settings. If all else fails, press the reset button on your router to return to the factory settings.
Set up Port forwarding: Back in the Netgear Router settings: Click on Port Forwarding/Port Triggering.
1. Click on Add Custom Service. Service Name: iChat1, Service type: TCP/UDP, Starting port: 5190, Ending port: 5190, Server IP Address: 192.168.1.22. Note this is the same as the IP Address for your mac with iChat. Click Apply.
2. Click on Add Custom Service: Service Name: iChat2, Service type: UDP, Starting Address: 5060, Ending Address: 5060, IP Address: 192.168.1.22. Click Apply.
3. Click on Add Custom Service: Service Name: iChat3, Service type: UDP, Starting Address: 5678, Ending Address: 5678, IP Address: 192.168.1.22. Click Apply.
4. Click on Add Custom Service: Service Name: iChat4, Service type: UDP, Starting Address: 16384, Ending Address: 16403, IP Address: 192.168.1.22. Click Apply.
Adjust UPnP settings: In Netgear router settings: click on UPnP. Leave UPnP on. Change Advertisement period to 5 and Advertisement time to live to 2. Note: UPnP by itself did not work for me.
Logout off you router.
Start iChat. Make sure you can connect to the Apple testers, AIM appleu3test01, appleu3test02, appleu3test03.
Hope this works for you. I used to get -8 errors most every time. Now I am error free.
Intel Mac Mini Core Duo Mac OS X (10.4.7) Apple BT Mouse & Keyboard

Hi Eric,
Welcome to the Apple Discussion Pages.
It does seem that iChat regards the fact that a PC with no Mic and no camera is not sending any data and regards this as a fault and ends the chats, normally, with the 10 sec error.
Glad you found a solution.
Ralph

How I Got iTunes to Work After the Latest (So-Called) Update

Does anyone at (cr)Apple test updates before releasing them?!! My iTunes, as I see has happened with many, MANY others, would not open after downloading the latest update. Here's what I did to fix this issue:
1. Go into Windows Control Panel, click on "Programs and Features", and find both Apple Application Support & Apple Mobile Device Support. Uninstall both of them (in my case, both applications were listed twice, with two different version numbers. Ihad to uninstall the newer one first, before I could uninstall the older version).
2. Download the correct version of iTunes for your operating system (32-bit for 32-bit versions of Windows; 64-bit for 64-bit versions of Windows), and SAVE it (NOT run!) somewhere, like your desktop.
3. Once downloaded, right-click on the file and use a program like 7-Zip to extract the files somewhere you'll be able to locate them (in my case, "ITunes64SetUp").
4. Go into the folder and find the follwing two files or programs: "AppleApplicationSupport.msi" and "AppleMobileDeviceSupport64.msi" (or, I'm assuming if your system is 32-bit Windows, that last one would be called "AppleMobileDeviceSupport32.msi" or maybe just "AppleMobileDEviceSupport.msi).
5. Double-click each one and that will launch the install programs. Follow the prompts and install both.
6. After that, your iTunes should work correctly. Mine did!
Good luck!
This is ridiculous that we have to do this - the average computer user would have NO idea how to fix this!

Quit iTunes.
Copy the iTunes Folder to the D drive, leave a copy on the C drive.
Then open the XML file in the C drive in the iTunes folder with a Text editor with "Find and Replace" ability.
Correct all the partial pathnames so it matches the new location where the iTunes Folder is now.
Example:
Find: C:\Windows\Users\Johnny\Music\iTunesFolder... to
Replace: D\\Music\iTunesFolder....
Quit iTunes and transfer all the folders out of the iTunes Folder on C except the two single files, including the XML you edited.
Start iTunes and click on one song you have but dislike, if it plays your fine. Leave the C/iTunes folders alone to make sure it works for all your content, then finally back it up or delete it to make room on C. Do a Windows defrag on C for increased performance.
If you get a Explanation Point in iTunes, it didn't find the file and you didn't correct the pathnames correctly..

Here is how I got Outlook and Q10 to sync

This isn't overly technical so work with me. The problem is images. If you have images (pictures) associated with contacts it will fail. In my case here is how I got it to work and I had 925 contacts.
1) in Oultook delete all images associated with each contact you might have
2) I then did exactly the same thing in by Berry contacts where I had associated images with friends or contacts.
3) deleted Faceboook and LinkedIn and Twitter apps.. . all of these apps try to link to your contacts and will import pictures which will kill the sync
4) deleted ALL my contacts from my Berry and reimported them. one way sync from Outlook.
5) scrolled through my entire contact list and where ever some picture had magically re-appeared, opened the contact, hit the 3 little dots and clicked on links and unlinked what ever the app was that was bringing in the picture. BBM llinks can exist and they don't mess you up withtheir pictures and they won't sync to Outlook anyway
also under settings I deleted all accounts except for my core account asscoiated with my contacts. This is the one that was my email account.. You can keep your BBM contacts.
Its a little harsh but I use my Berry for work so be deleting all the fluff such as Facebook, LinkedIn and Twitter I was able to get it to sync and actually sync within a minute. If you need Facebook to survive then I guess you will have to get an iPhone.
I am sure there is a way that is more sophisticated than the above that allows you access to Facebook but after 5 months of whining and cursing that my contacts and calendar were a mess I decided to actually pay to talk to Blackberry and have one of their people help me fix it
Good Luck

The full res images made on the 1020 can only be taken off the phone through a USB connection with a PC. The OS itself is only aware of the 5MPx image.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

How I got my MicroPhoto to det

After hours of trying different things I finally got it to detect my MicroPhoto. I figure I might as well post how I got it to work.
. Uninstall everything
2. Reinstall + update to 3.30.2 ( Can be found at Creative support )
3. Reboot
4. Run windows update ( even though I was fully updated after CMS was installed it found some more)
5. Reboot
6. Changed my USB settings* ( http://tinylinks.net/4935 ) Cant put long links in it seems. This tinylink should take you to the right site. If not please read the info after *.
7. Reboot
Im not sure if you need to do all these steps but its how I got mine to work.
Good luck
* For some reason I can put long links. So if the tiny link doesnt work. Go to support>knowledge>mp3 and use " regedit" for teh key word and look for "MP3 player not detected in Windows Media Player 0 or Creative Media Explorer" And follow the dir there.

After hours of trying different things I finally got it to detect my MicroPhoto. I figure I might as well post how I got it to work.
. Uninstall everything
2. Reinstall + update to 3.30.2 ( Can be found at Creative support )
3. Reboot
4. Run windows update ( even though I was fully updated after CMS was installed it found some more)
5. Reboot
6. Changed my USB settings* ( http://tinylinks.net/4935 ) Cant put long links in it seems. This tinylink should take you to the right site. If not please read the info after *.
7. Reboot
Im not sure if you need to do all these steps but its how I got mine to work.
Good luck
* For some reason I can put long links. So if the tiny link doesnt work. Go to support>knowledge>mp3 and use " regedit" for teh key word and look for "MP3 player not detected in Windows Media Player 0 or Creative Media Explorer" And follow the dir there.

Fcp to color how you have got color to work

Hi Guys I am having problems in getting the work flow with color to work and keep asking question on how to fix it , so i am thinking is there any body who would like to share how they got color to work and what setting you use, what formats ect. so we could get a list of working mac that every body can see. so please if you are up and running and your wrok flow works please tell me and all the other just how you have done it
Thanks

Hi Trevor,
welcome here!
Maybe your message tells us more about some frustrations you have been experiencing rather than the actual technical glithces you have encountered.
Therefore, I start with a very symple reply.
When I need Color to grade my video (usually DVCPRO HD) I simply go to file>send to>Color.
I colour grade, render and send it back to FCP.
Never had problems with that.
To use Color you may need (recommendable) dual core intel processor or higher, 4GB RAM or higher, X1900 graphics card, High Def. external monitor. An external or internal drive capable to let you edit on the fly.
I noticed that you are using Leopard.
Issues related to the new OS with FCPstudio2 are quite common and we are all taking notice of it.
Leopard was not specifically designed for FCP users so those and other issues were more or less predictable.
Hope this helps!
Gig

How I got 48.11gb FREE on my MBA SSD.

Got the MBA today and i am LOVING IT.
Here's how I got 48gb free -- and my reasoning behind it...
1. I followed everything in this article -- http://guides.macrumors.com/CompleteSteps_to_Perform_a_Clean_OS_X_Reinstall_on_Your_MacBookAir. I remote installed using my old PBG4's drive. It took about 1.5 hours. The short install time was most likely due to the fact that there was very little to install!
In the article, for Step #10, *I unchecked everything*.
For the bundled apps, my reasoning was as follows: I don't need official help documents (200 mb) b/c these are all online... iWeb is worthless... iMovie and iDVD are similarly pointless on a computer w/no DVD drive (and I've never used them once since they came out)... Garageband might be useful to musicians but that I am not... iPhoto -- while nice to have -- has largely served as a conduit to get my pictures up into Picasa. Photo editing and viewing has all gone online these days. I'll most likely need at least the Picasa Uploader in the future, but I'm going to hold off on iPhoto for as long as I can. (However, I'll miss using the trackpad to rotate and zoom in on pics using iPhoto.)
When and if I ever need these apps, I can remote install them using Disc 1.
Note: during the install, I didn't need to insert the second disc b/c I unchecked XCode, which I don't need.
2. As the article suggest, I also manually deleted the voice files in the System folder.
3. I then bought a license for xSlimmer and dumped all of my apps and utilities into it, freeing up about 700 more mb. I was hesitant to do this so I backed up all of my apps (a feature of the program) to an external hard drive. Obviously, the backup can't stay on the MBA -- I need the space!
Note: Despite my hesitations on app instability, 90% of what was slimmed came from Mail, iTunes, Address Book, etc, apps that still have 17 useless languages even IF you chose to ditch all languages besides English in Step #10 of the MacRumors article.
4. I deleted Chess... If I ever need to play it, I'll play online -- w/other people as it was meant to be played!
*5. That puts me at 48.11gb!*
6. My philosophy going forward -- and the entire reason I bought the MBA -- is to be as online and web app-dependent as possible. That's where the future lies and part of the reason I bought into the MBA philosophy (while an expensive one) is b/c I believe in this trend. I'm an advocate of an online existence and as such, I'm going to try to live in such a manner.
Future apps I'll most likely dump -- Mail, which I don't think I've even opened in a year... iCal, which I only keep b/c I sync my Google Calendars to iCal and then to my iPhone... Dictionary, which is inferior to more complete online dictionaries... Stickies, iChat, Time Machine -- again, these are all cutesy apps, but realistically, the first two are now done better online (meebo, gChat, facebook) and for the latter, I don't see the point of being a zealous backup fiend if I have nothing to backup in the first place! (Although, I've done just fine w/SuperDuper the past 2 years.)
7. For my iTunes library, which is over 200gb, I bought a Western Digital 320gb Passport on eBay for ~ $100 and plan to listen to music w/the external connected while at home.
While on the go, I'm pretty good w/the 16gb on my iPhone.
Also, music is now so 2.0 I enjoy discovering and hearing music through services like last.fm and Pandora. (If iTunes were ever to become more of a social network and be more open, they could really have something, but I think Songbird might have already beat them to it...)
8. Future apps I'll most likely install -- Scrivener, iWork, Camino (a second browser is always nice), VLC, xTorrent.
9. I also plan and hope to one day upgrade the 64gb to a 128. This AnandTech article -- http://www.anandtech.com/mac/showdoc.aspx?i=3226 -- is the single best review I've read of the MBA. It leads me to believe by the end of the year, upgrading to a 128gb might be possible.
Sorry for the long post. I just though I'd share some thoughts w/everyone.
- david

Thank you!
I haven't read all of your post yet but from what I have read I believe we are in agreement. I have copied it into my notes on the MacBook Air. When I get $ together and get my MBA I will definitely be going back and studying your post in detail.
Thanks again!
PS: you lucky dog!

"how I got my AOL DESK TOP TO WORK AGAIN AFTER MAVERICKS"

This is how I got my AOL DESK TOP TO WORK AGAIN clic on the link at the end when you get there to the right side under resources! you will see download ( aol desk top for Mac ) it will be 1.7.784 clic and download then everything should be back to normal.Bob AOL Desktop for Mac 1.7 - Mac@AOL Blog - AOL.com

Have you tried a PRAM reset?
http://support.apple.com/kb/ht1379
If you look in the audio output port, is there a red light showing. If so, the internal switch is stuck.. Insert the headphones a few times, jiggle a toothpick inside or shot some compressed air to trip the switch. If no success, have the Apple store genius bar technician do it.
Ciao.

How i got my all contacts back to my iphone

plz help me out how i got back to all my contacts back to my iphone 4s

Where are they? In the iCloud? Have you got Settings > iCloud > Contacts set to "On"?

I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually.

I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually since I have a iTouch and keep all my music there. HELP!!

Have you tried deleting the songs from Settings?
Settings -> General -> Usage -> Manage Storage (not the iCloud link!) -> Music and then click Edit to enable you to be able to delete.

How I got my L7780 Direct Digital Filing to work on MacBook Leopard 10.5.6

My situation was that I had miraculously been able to get Direct Digital Filing working once, but couldn't remember the exact steps I made to get it to work. I then had to clean reinstall my MacBook. And even when I put the exact path name that I had used originally in the web server for the printer (EWS?) and had set the network settings the same way I had originally. I was unable to get DDF to work.
I was able to set up the L7780 wirelessly. I was able to print and scan from my MacBook wirelessly. BUT I couldn't get Direct Digital Filing to work.
Neither Technical Support nor internet forums helped me entirely. I just took good tips here and there and finally got it all working together. Had a nightmare of a time figuring it. I called HP Tech Support and they told me I had setup everything on the L7780 correctly...only it just wouldn't working. Tech Support didn't offer to send me a new printer, but only suggested that I could do without Direct Digital Filing???
What I did...
Uninstall everything, the HP software from laptop. Making sure that all traces of the printer, or its drivers were off computer. Reset Network settings to default on printer. Reset factory defaults under Tools Menu on printer. Reset my wireless router.
1. I turned the router on
2. I turned the printer on (at this point, it is not connected to the network at all, either ethernet wire, or wireless, it has no IP address)
3. I turned my MacBook on
4. Connected my MacBook to L7780
5. Installed the Printer software that I downloaded from HP website on MacBook. (Installed L7780 as USB)
6. Tested the printing, and the scanning from my MacBook to make sure it works.
7. Downloaded the Software Update from Apple that always comes up to update the HP driver after installation.
Then for Direct Digital Filing,
8. From the L7780 I selected the Setup Wireless Network Wizard or something like that. After that, the printer was connected to my network, and had an IP address.
9. (Unable to get DDF working on my MacBook, I made a last ditch effort to see if it worked on my Windows Vista Laptop that had worked before as well) I turned on my Windows Vista Laptop, opened up Command, and pinged the IP of the printer. It worked.
10. I created a folder and configured it to share for the printer. After configuring it. It will tell you the Address that you use to type into the Direct Digital Filing speed dial path to the folder. I did that. I tried DDF to the Windows Vista folder and it worked on my Vista laptop. Encouraged...
11. I then tried it on my MacBook. I got into Terminal. I pinged the IP of the L7780. Strangely, I got an endless ping result list, it wouldn't stop. You have to press CTRL+C to stop it.
12. Then I created a folder in root directory of my MacBook Hard Drive. "Scan." Went into Systems Preferences. Went into the Sharing Tab. Clicked the + sign to add a shared folder. Selected the new "Scan" folder. Made sure the Option was for SMB sharing (Must type in user ID & password). Made sure "File Sharing" was selected.
Voila it finally worked!!!!
NOTE:
In the EWS? (web embedded print server by typing in the IP of the printer in your web browser)the Path is as follows: \\HARDDISK\Scan
type in user name & password
leave PIN blank, or erase it if there is anything there
(If you have it in your Documents folder, it would look something like this... \\HARDDISK\Users\Username\Documents\Scan ..... However, becareful in the EWS if your path name is too long, you can't type in the entire path .... ALSO the original time that it was working (I don't know how)... I had my path as \\192.168.1.5\Username\Documents\Scan .... For some reason I was able to use my IP address of my MacBook, and then skip to my User name without the "Users" path before it .... However, since I reinstalled my MacBook, that address no longer worked for some reason.)
NOTE:
Either After I got it working on my Windows Vista Laptop, or after pinging the printer from my MacBook. I noticed a strange change in my Networks in the System Preferences. There was a new Location ncamed "hp nct temp set" instead of the original "Automatic" location that was there before. On the left, all "Airport" icons, "Connected" & full signals, instead of a variety of icons, Bluetooth, Airport, Ethernet, etc that the original Automatic location had. Either way, it seems to be making the Direct Digital Filing working, so I won't ask why. Further details in "Advanced" showed nothing different other than under "Airport" "Preferred Networks:" there was an additional Network Name "hpsetup" other than my home Wireless network. All other settings seem to be the same.
SUMMARY:
(Like I said, I'm not sure if Direct Digital Filing started working on my Macbook running Leopard because I got it to work on my Windows computer first, or because I used Terminal to ping the printer.)
but...
1. Setup L7780 wirelessly by making sure your Wireless network is working, and then turning on the printer, and then select "Wireless Setup Wizard" under Network on printer. It will give you a list of wireless networks from which you choose yours, and then type in the security password. After that is complete and it says your printer is now connected to the network, select display wireless network settings to make sure the L7780 has an IP address.
2. On your Mac, open up Terminal and ping the IP of L7780. CTRL+C to stop it from pinging if it doesn't stop automatically
3. Create and share folders on your Mac (making sure it's SMB with user id and password, and that the path to the folder isn't too long)
3. Then setup Direct Digital Filing speed dials in the EWS by typing in the printer IP address in your web browser and going on the "Settings" tab.
4. Test it from the L7780 by pushing the Direct Digital Filing button under Scan!
I wrote this out for all those people that must be having a hard time with this as I had myself, and not getting any help from the internet or from Technical Support. I hope I figured it out for most of us.

I found this post and the HP instructions for setting up digital filing to be extremely frustrating, because nothing worked -- UNTIL I tried shutting down my Mac and rebooting after entering the settings (a simple restart would probably have done as well). Digital Filing then immediately worked like a charm. For the benefit of others like me who find abstract paths useless, here is the specific path setting that works on my Mac (you will of course have to use a different path on your Mac, but this will give you a real-world example of a path that works) -- this is on an HP Officejet Pro L7780:
\\BillCheesemanG5\cheeseb\Public
In abstract terms, this is:
\\<computer name from Sharing pane of System Preferences>\<short user name>\<folder named Public in my user domain, which comes already set up for sharing when you install Mac OS X>.
I hope this helps somebody.
Bill Cheeseman

How can I install Aperture on my new Macbook Pro. I am up to date with my Mac Pro, I have the Aperture 1 and installation disks but cant remember how I got to 3. Can anyone help? Many thanks regards Alf

I have an up to date version of Aperture on my Mac Pro, and I would like to install it on my new Mac book Pro. I have the original installation disks for Aperture 1 and 2. I cant remember how I got to Aperture 3, I think it was via a web download but not sure. I have checked my purchases in the App Store but there is no indication of me buying an upgrade to Aperture 3.
Ive tried to download it from the App Store but it wants me to pay again.
Can anyone help on how to install Aperture 3 on my new Macbook .
Many thanks regards Alf

Then you can download the Trial version of Aperture 3 and unlock it with your serial numbers - you will need all three for all three versions: A current link to the Trial version is in this support document, also instructions on how to reinstall on different systems:
Aperture 3.4: May quit unexpectedly on launch after updating
Regards
Léonie
BTW: Your Aperture 3 serial number will be displayed in the "About" panel - the panel you see, when you use the command "About Aperture" from the Aperture menu in the main menu bar.

I just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

Did you enable Siri in settings?
Settings > General > Siri > ON
If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control.

How I got the .4181 OS finally installed and running stable

Hi folks,
after a very long night shift, I am "proud" to announce that my Z10 is now running stable in 4181 without any missing functionalities. (even phone calls seem to work properly :-) )
Interested in how I got there, then just read on:
IMPORTANT:
If not already done, BACKUP ALL DATA on Your Z10 device, You´ll surely need this Backup! :-)
After the everlasting security wipe, which I tried to interrupt several times, by pulling the battery (and the SIM) out, it finally stopped and showed me the connect to PC icon on the screen of the Z10.
So I connected my Z10 and restored the factory FW using the BlackBerry Link Software, WITHOUT having the SIM inserted.
After the first initial setup, I looked for SW Updates, but (and of course) none was presented, due to the missing SIM, so I continued to do some basic setups and "testing" the bare system. All went fine.
After that, I reinserted my SIM, powered the Z10 up and tried to copy the previous backup back onto the Z10, which was (another of course and obviously) not possible, due to mismatching SW-Releases.
So with the SIM inserted, connected to a WiFi and my mobile carrier, I once again checked for updates and voila, .4181 was available, this time having 359MB.
(--> BlackBerry just seems to provide the "basic emergency" OS, all further updates and releases are distributed through Your individual mobile carrier)
I initiated that download, went to bed to get at least a few hours of sleep and when I woke up, I did, what the display on the Z10 wanted: Restart the device.
The then following boot sequence was fast and smooth, reaching the 100% in just under two minutes, no freeze, no hangers, no being stuck.
There I had my bare device on which I could copy my previously carried out backup again in no time!
Of course I had to reenter the some passwords and the SMS were gone, but looking at the last days, I think this is the biggest progress of it all ;-))
THIS is how I did it. Of course I know that I defied against some of the most important rules and therefore I can and will not give You any guarantees that this "solution" will work unlimited, but considering my high level of frustration and how angry I was, these measures seemed legit to me and I can tell, they just worked fine! ;-)
the steps in summary:
- Backup all Data
- do a Security Swipe
- extract SIM
- reset to factory presets using BlackBerry Link
- re insert SIM
- look for provider updates
- install
- copy previous backup to device
- don´t worry
- be happy
PS: Don´t panic, if it takes longer or if nothing seems to happen. What I burnt mostly the last days, where minutes, hours and days
Thumbs up and fingers crossed. I hope this might help You aswell!
If it does, feel free to like this "solution" :-)
Paddy

Sorry for not being detailed enough.
I have Vista: Ultimate 32 bit edition. Everything works the stereo the 5. surround sound but the main things I did notice is that alot of the options like the crystalizer and various options wouldn't save. They would definately work just when I went into creative console to adjust some more they all went back to the default settings even though they worked and were changed earlier.
Whilst playing Call of Duty 2 it wouldn't use the EAX, I haven't tried other games . I would recommend staying with XP as of right now if you have uninstalled Vista and wait for proper drivers , there is no guarantee the way I installed or explained how to fix will work for you. Just as others before have gotten things to work with different steps to install they did not work for you, so mine not work for you. If you still have Vista installed then why not give my simple step a shot in my first post.

I dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.

i dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.

To turn off auto sync - launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom that says - Prevent iPod, iPhones and iPads from syncing automatically. Click OK and then quit iTunes.
Connect your iDevice to your PC.
Launch iTunes,
Click on the device name on the left side of the iTunes Window.
Click on the Photos Tab in the iTunes window on the right.
Untick all of the photos or albums that you want to remove.
Click on Apply in the lower right corner of iTunes
If you untick or uncheck the Sync Photos heading and then click Apply it will remove all of the photos from the device when it syncs. In this screenshot - I have only certain albums and events selected to sync.

Killing me softly... or how I got iWeb to work

Similar Messages

Maybe you are looking for