KIMYONG: OAM에서 login 하지 않고  Workflow Mailer Parameters 를 변경하는 방법

Purpose
Workflow mailer parameter를 변경하기 위해서는 OAM에 접속해야 한다.
이런 불편함을 줄이는 방법을 소개하고자 합니다.
Solution
다음 Script를 사용하면 Workflow Notification Mailer parameter 를 변경할수 있습니ㅏㄷ.
사용법과 parameter는 아래와 같습니다.
1.Run the following script $FND_TOP/sql/afsvcpup.sql from sqlplus as apps user
2.For prompt Enter Component Id: enter id corresponds to Workflow Notification Mailer
3.For prompt Enter the Comp Param Id to update enter id corresponds to parameter you want to change
4.For prompt Enter a value for the parameter enter your parameter value
Reference
Note 442805.1

Similar Messages

  • Issue in workflow mailer configuration

    Hi all,
          I have to configure notification mailer, for that I have an IP address of smtp server and an email username and password. Using these 3 details I can configure the mail in MS Outlook and send/recieve mails. When I give the same details in Notification mailer page, I am getting relaying denied error. Please help me in resolving this.
    Our environment is R12.1.3 on AIX 6.1
    Regards,
    Charan

    Hi,
       Thanks for the reply. Error is below
    FAILURE: javax.mail.SendFailedException: Sending failed; nested exception is: class javax.mail.SendFailedException: Invalid Addresses; nested exception is: class javax.mail.SendFailedException: 554
    5.7.1 <[email protected]>: Relay access denied Parameters {{OUTBOUND_USER=test@gov.***, FROM=Workflow Mailer, REPLYTO=test@gov.***, OUTBOUND_SERVER=10.10.10.10, OUTBOUND_PASSWORD=*****,
    COMPONENT_ID=10006}}
    Regards,
    Charan

  • Regarding Workflow mailer error

    Hi
    Could anyone teach me how to troubleshooting these errors in log of mailer?
    My customer made mailer available through OAM and could send notification.
    However, a lot of errors were found in log of mailer.
    Quote
    [Nov 7, 2011 8:33:55 PM JST]:1320665635770:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665633553:10:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10011
    [Nov 7, 2011 8:33:54 PM JST]:1320665634490:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665634490:11:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.read()]:10consecutive errors occurred
    [Nov 7, 2011 8:33:57 PM JST]:1320665637002:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665634490:11:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.cp.gsc.Processor.performError(ProcessorException)]:Maximum number of errors have occurred for this processing thread.
    <af type="tenured" id="106" timestamp="Nov 07 20:33:58 2011" intervalms="3796.734">
    <minimum requested_bytes="98320" />
    <time exclusiveaccessms="0.032" meanexclusiveaccessms="0.032" threads="0" lastthreadtid="0x3225CB00" />
    <refs soft="399" weak="183" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
    <tenured freebytes="0" totalbytes="18192896" percent="0" >
    <soa freebytes="0" totalbytes="18192896" percent="0" />
    <loa freebytes="0" totalbytes="0" percent="0" />
    </tenured>
    <gc type="global" id="106" totalid="106" intervalms="3796.788">
    <expansion type="tenured" amount="3553280" newsize="21746176" timetaken="0.000" reason="insufficient free space following gc" />
    <finalization objectsqueued="27" />
    <timesms mark="22.192" sweep="0.514" compact="0.000" total="23.115" />
    <tenured freebytes="6622496" totalbytes="21746176" percent="30" >
    <soa freebytes="6405408" totalbytes="21529088" percent="29" />
    <loa freebytes="217088" totalbytes="217088" percent="100" />
    </tenured>
    </gc>
    <tenured freebytes="6524176" totalbytes="21746176" percent="30" >
    <soa freebytes="6383376" totalbytes="21605376" percent="29" />
    <loa freebytes="140800" totalbytes="140800" percent="100" />
    </tenured>
    <refs soft="214" weak="167" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
    <time totalms="23.241" />
    </af>
    [Nov 7, 2011 8:34:29 PM JST]:1320665669022:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:10.140.102.13:73020:1320665606034:1:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10005
    [Nov 7, 2011 8:34:36 PM JST]:1320665676474:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:(BusinessEvent{name=oracle.apps.fnd.cp.gsc.SvcComponent.start, key=SVC:07-NOV-2011, priority=50, correlationId=null, sendDate=Mon Nov 07 20:34:29 JST 2011, receiveDate=null, From Agent:  , To Agent:  , Last Subscription=  , Error Message=null, Error Stack=null, CONTAINER_TYPE=GSM, CONTAINER_PROCESS_ID=133833, COMPONENT_ID=10005, [email protected], BES_PAYLOAD_OBJECT=false})
    [Nov 7, 2011 8:34:46 PM JST]:1320665686481:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(int, String, String)]:Successfully retrieved component details from the database
    [Nov 7, 2011 8:34:46 PM JST]:1320665686614:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10005
    [Nov 7, 2011 8:34:46 PM JST]:1320665686772:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665686772:13:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.read()]:10consecutive errors occurred
    [Nov 7, 2011 8:34:46 PM JST]:1320665686812:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665686772:13:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.cp.gsc.Processor.performError(ProcessorException)]:Maximum number of errors have occurred for this processing thread.
    [Nov 7, 2011 8:35:29 PM JST]:1320665729053:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:10.140.102.13:73020:1320665606034:1:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10005
    <af type="tenured" id="107" timestamp="Nov 07 20:35:36 2011" intervalms="98237.510">
    <minimum requested_bytes="98320" />
    <time exclusiveaccessms="0.024" meanexclusiveaccessms="0.024" threads="0" lastthreadtid="0x330E6900" />
    <refs soft="483" weak="329" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
    <tenured freebytes="0" totalbytes="21746176" percent="0" >
    <soa freebytes="0" totalbytes="21605376" percent="0" />
    <loa freebytes="0" totalbytes="140800" percent="0" />
    </tenured>
    <gc type="global" id="107" totalid="107" intervalms="98237.593">
    <expansion type="tenured" amount="1048576" newsize="22794752" timetaken="0.000" reason="insufficient free space following gc" />
    <finalization objectsqueued="25" />
    <timesms mark="20.137" sweep="0.800" compact="0.000" total="21.178" />
    <tenured freebytes="6998816" totalbytes="22794752" percent="30" >
    <soa freebytes="6623520" totalbytes="22419456" percent="29" />
    <loa freebytes="375296" totalbytes="375296" percent="100" />
    </tenured>
    </gc>
    <tenured freebytes="6900496" totalbytes="22794752" percent="30" >
    <soa freebytes="6671632" totalbytes="22565888" percent="29" />
    <loa freebytes="228864" totalbytes="228864" percent="100" />
    </tenured>
    <refs soft="215" weak="169" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
    <time totalms="21.265" />
    </af>
    I have checked the below notes,but I'm not clear.
    761434.1 Workflow Mailer fails to star : Maximum Number Of Errors (100) Have Been Reached : WebSession.isSessionRecreated
    333017.1 OWF.G Mailer just started dumping a OutOfMemoryError
    Please teach me what's the meaning of errors and what we should deal with them.
    Best Regards
    Liying

    Please post the details of the application release, database version and OS.
    Please see these docs.
    Java.Lang.Outofmemoryerror On Large Inbound XML Message [ID 560680.1]
    Intermittently Notification Emails are not Received [ID 1315344.1]
    OWF.G Mailer just started dumping a OutOfMemoryError [ID 333017.1]
    Output Post Processor is Down With Error "Insufficient Free Space Following GC" [ID 885607.1]
    Thanks,
    Hussein

  • Workflow mail shows junk character in outlook where arabic

    Hi all
    We have EBS R12 12.0.4. I am facing the problem with workflow mails.
    whenever the workflow mails comes in outlook it show junk characters instead of arabic letters.
    regards
    Musaddaq

    I have done following steps but no changes have the same issue.
    1. Navigate to OAM->Workflow Manager->Notification Mailer->View details in this page
    2. Look for parameter called RESET_NLS change this value from 'YES' to 'NO'.
    3. Bounce Notification Mailer.
    Regards
    Musaddak.

  • Workflow mailer with IMAP

    Hi Guru's,
    I have inititally configured workflow mailer.
    Now i need to add the imap feature. I have set up keystore for SSL certificate authentication and added it the applications by running @$FND_TOP/sql/afsvcpup.sql
    When i send testmail from OAM, it reaches the user's inbox and i am able to send acknowledgement back from the user's inbox. I am also able to see the acknolwedgement mail in the inbox of the imap user's inbox.
    But now how will it actually update the R12 applications from the imap inbox.
    Shouldnt the the mails be arriving in PROCESS or DISCARD folders?
    Will i get back a mail if the request has been processed or discarded?
    Regards,
    Sri

    >
    But now how will it actually update the R12 applications from the imap inbox.
    >
    This is the functionality of inbound email processing.
    >
    Shouldnt the the mails be arriving in PROCESS or DISCARD folders?
    >
    Once the workflow mailer receives a notification and acts on it, the message will be automatically moved to the PROCESS or DISCARD folders.
    >
    Will i get back a mail if the request has been processed or discarded?
    >
    I do not believe this functionality of confirmation exists.
    MOS Doc 831982.1 - 11i/R12 - A guide for troubleshoting Workflow Notification Emails - Inbound and Outbound
    HTH
    Srini

  • NEED INFO REGARDING WORKFLOW MAILER &MAPI

    HI,
    Need information
    our workflow mailer is configured with LOTUS NOTES now we wanna to
    move to OUTLOOK and we use IMAP4 protocol now we wanna to
    replace this with MAPI.
    So please let me know how to configure in OUTLOOK and also
    MAPI is a oracle certificated protocol and how to configure it.
    Thanks in Advance,
    Vandana

    Please see these docs.
    What Mail Server Types Can Be Used To Configure The Workflow Java Mailer In R11i and R12.+ [ID 943578.1]
    A System Administrators' Guide: Oracle Applications 11i Workflow [ID 139745.1]
    WF 2.x: Configuring the Notification Mailer v 2.0.3 - 2.6.2 (not OAM) - MAPI [ID 104197.1]
    Thanks,
    Hussein

  • Error in workflow mailer configuration - Inbound Email Server

    Hi
    I have Windows 2000 SP4.
    I have installed Oracle Workflow 2.6.3 Standalone as below
    I have installed Oracle Database 10gR1 and Oracle Workflow Server 2.6.3 in same oracle home.
    I have installed Apache HTTP Server 9.0.4 and Workflow Middle Tier in the same oracle home.
    I have finished installation and configuration successfully.
    Now I want to configure mailer parameters.
    I have started Workflow Component Container and Workflow Management Container.
    When I try to enter paramters for mailer I get error in Inbound EMail Account Server Name.
    The error says: Unable to make a network connection.
    I do not want to configure Inbound Mail Server but I need to enter these parameters as they are mandatory.
    I set Inbound Thread Count = 0 so that configuration does not consider parameters for IMAP server.
    My mail server is SMTP server.
    Any idea how to overcome this error and continue with notification mailer configuration?
    Thanks

    You would need to modify all the parameters listed in this script. This script updates each of the mailer and agent listener parameter. You may edit the script to remove all API calls OTHER THAN those for "Workflow Notification Mailer".
    Then update ALL the parameters for "Workflow Notification Mailer" with appropriate values with Inbound Thread Count to 0 and Outbound Thread Count to 1. Inbound Server Name, Account, Inbox, Discard and Processed values can be ignored. Make sure Outbound Server Name is valid SMTP Server name.
    Values like From, HTML Agent should point appropriately as per your env.
    Hope this helps
    Vijay

  • Workflow mailer configuration -Unable to make a network connection

    Hi Friends,
    We are trying to configure imap server in 11i workflow notification mailer & getting the error message "Unable to make a network connection".
    system configuration:
    EBS 11i - windows 2003 server
    database - 11.1.0.7
    for imap server we are using ms exchange server 2007.
    pl help us to resolve this issue .
    *Jan 24, 2012 2:13:58 PM GST]:1327400038328:Thread[BES Dispatch Thread,5,main]:0:-1:QLNG-S-012:172.16.4.12:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-51286 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.78 2004/12/16 16:17:13 rnix ship $ @23667197 {oracle.apps.fnd.profiles.ExtendedProfileStore@136a43c}],mUniqueId=SVC-GSM-WFMLRSVC-51286,mLevel=4}, oracle.jdbc.driver.OracleConnection@1a7508a, 10006, STOPPED_ERROR, Could not handle the control event -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {INBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, PROCESSOR_READ_TIMEOUT_CLOSE=N, INBOUND_PROTOCOL=IMAP, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, [email protected], PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:OPEN_MAIL_FYI, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_8#6#$##88^9494^!$$89$#^666@#496^#4!$8$ `A+A9+*|!$^}^&%|#}!@%^$09|@}$#}0+, RESET_NLS=N, HTTP_USER_AGENT=Mozilla/4.76, PROCESS=PROCESS, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, DISCARD=DISCARD, [email protected], FROM=Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://qlng-s-012.qalhatlng.int:8000/pls/PROD, INBOX=INBOX, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, OUTBOUND_SSL_ENABLED=N, INBOUND_SERVER=172.16.4.3, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL_OUTLOOK, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=1, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=N, INBOUND_SSL_ENABLED=N, OUTBOUND_SERVER=qlng-s-003.qalhatlng.int})
    [Jan 24, 2012 2:14:38 PM GST]:1327400078003:Thread[ComponentMonitor,5,main]:0:-1:QLNG-S-012:172.16.4.12:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-51286 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10006
    [Jan 24, 2012 2:14:46 PM GST]:1327400086473:Thread[BES Dispatch Thread,5,main]:0:-1:QLNG-S-012:172.16.4.12:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-51286 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:(BusinessEvent{name=oracle.apps.fnd.cp.gsc.SvcComponent.start, key=SVC:24-JAN-2012, priority=50, correlationId=null, sendDate=Tue Jan 24 14:14:40 GST 2012, receiveDate=null, From Agent:  , To Agent:  , Last Subscription=  , Error Message=null, Error Stack=null, [email protected], COMPONENT_ID=10006, CONTAINER_PROCESS_ID=51286, CONTAINER_TYPE=GSM, BES_PAYLOAD_OBJECT=false})
    [Jan 24, 2012 2:14:56 PM GST]:1327400096565:Thread[BES Dispatch Thread,5,main]:0:-1:QLNG-S-012:172.16.4.12:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-51286 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(int, String, String)]:Successfully retrieved component details from the database*

    Thanks for your update.
    I have checked as per the metalink doc "242941.1" . i am getting below message only for IMAP.
    *C:\prod\scripts>%AFJVAPRG% -classpath %AF_CLASSPATH% -Dprotocol=imap  -Ddbcfile=
    c:\prod\prodappl\fnd\11.5.0\secure\PROD_qlng-s-012\prod.dbc -Dserver=qlng-s-003.
    qalhatlng.int -Dport=995 -Dconnect_timeout=120 -Ddebug=Y -Daccount=oracle1@qlng
    .om -Dpassword=System123 -DdebugMailSession=Y oracle.apps.fnd.wf.mailer.Mailer
    MLRTST : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.o
    ut until necessary parameters are retrieved for Logger to be properly started.
    DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.
    IMAPStore,Sun Microsystems, Inc]*
    Kindly suggest need to any setup in ms exchange server or firewall level.
    Thanks

  • Workflow mailer 11i

    Hi:
    workflow mailer 11i won't start. it starting for a long time. listener is up.
    Please help.

    From Log file:
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.out until necessary parameters are retrieved for Logger to be properly started.
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsm.GSMSvcComponentContainer.initializeStateMachine() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.getNewWorkflowContext() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.getNewWorkflowContext() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.loadGlobalParameters() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsm.GSMSvcComponentContainer.loadContainerParameters() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.start() : Successfully retrieved global and container parameters
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.validateParameterValues(Properties) : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.validateParameterValues(Properties) : ({SVC_COMP_MAX_ERROR_COUNT=10, SVC_COMP_MONITOR_LOOP_SLEEP=60, SVC_CONTAINER_LOOP_SLEEP=10, SVC_CONTAINER_READ_TIMEOUT=10, SVC_COMP_MONITOR_ONDEMAND_FREQ=300, SVC_CONTAINER_LOG_LEVEL=1, SVC_WRITE_DIAG_TO_GSM_LOG=Y})
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.start() : Successfully validated container parameters
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsm.GSMSvcComponentContainer.loadDetails(Connection) : BEGIN (oracle.jdbc.driver.OracleConnection@16921fd)
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.start() : Successfully retrieved container details
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsm.GSMSvcComponentContainer.startLogger() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.startLogger() : BEGIN [default implementation]
    SVC-GSM-WFALS

  • Workflow Mailer goes down

    We have configured workflow , its keeps on going down.
    EBS: 11i
    OS: SUSE 10
    DB: 10g R2

    Please check the $APPLCSF/$APPLLOG/FNDCPGSC*.txt for any errors,
    and refer metalink notes and we have discussed many times in this forums, please search in forums.
    Control - Workflow: Setup Doc ID: 113664.1
    Configuring the Oracle Workflow 2.6 Java-based Notification Mailer with Oracle Applications 11i [ID 231286.1]
    Re: Workflow setup Questions
    Note: 548918.1 - How to start the Workflow Deferred Agent Listener andWorkflow Java Deferred Agent Listener?
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=548918.1
    Note: 452354.1 - How To Start or Stop The Workflow Mailer Or Defered Agent Listener From The Command Line, Not From OAM
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=452354.1

  • HOW TO ENTER MAILER PARAMETERS

    In standalone oracle WF, while installation i have not entered mailer parameters in workflow configuration assistant. Now i want to do entry for mailer parameters, so should i need to run workflow configuration assistant again?
    If yes then whether it will again run all scripts?
    is there any other way to enter mailer parameters?
    Thank you in advance
    Regards,
    jakpun

    You can use Workflow Manager UI from Enterprise Manager to configure Notification Mailer. You should not run Workflow Config Assistant again.
    Thanks

  • How to configure oracle alerts to use Workflow mailer?

    Hello Guys:
    We were trying to setup oracle alerts using workflow mailer. I have created a dedicated mailer for handling oracle alerts related mail.
    Here is what I need to clarify:
    1. Having setup a new mailer for Oracle alert do I have to still configure the Options in Oracle Alerts. This is where you choose which type of mail u want to use ( like Unix mail,Windows NT mail )
    2.How do I tell oracle alert to use the new mailer that I created exclusively for this? While creating the mailer at some point I remember putting ALR in configuration form.
    I am on 11.5.10 CU2. I am on 11i.ATG_PF.H
    Regards,
    Bala

    Hi Hussain:
    Based on the note I realised that my oracle alerts will user unix sendmail. But then If u go to " Oracle Alert Options "
    -- > Mail systems -- I check Unix send mail
    -- > Mail server options ( Do I have to fill this section? )
    My guess is that the send mail will post the email to a IMAP account ( I created oraclealert account ) and IMAP account will push the alert email to Recipient
    Mail Database/Server Name --- imap.mydomain.com
    Mail Priority --- Normal
    Accounts
    Application Installation username Password
    Blank ** Blank ** oraclealert pwd
    Blank ** Blank ** oraclealert pwd
    ** - It wont allow me to choose an application.
    Is there a simple test to make sure that my oracle alert is working or not? I appreciate your help.
    Regards,
    Bala

  • Additional workflow Mailer setup on Purchase Order

    Dear All,
    We are running on R12 on 11.0.1.7 database. We have configured Workflow mailer notification and it seems to be running properly.. And the approver/approvee gets appropriate mails on appropriate time.
    But our management requires additional customization on how this function should work, The requirement is as follows:
    Problem Description: When a PO is raised it goes to his immediate superior who can approve the PO for less than Rs.100,000 and if it is above the stated amount, the respective PO requires further approval from the next superior in the hierarchy.
    The workflow standard setup is such a way so that the user who has raised the PO gets a mail notification alerting that the PO has been approved if so.
    Could you guide me a way in Oracle Ebiz R12 so that not only user who has raised the PO is alerted through mail if the PO is approved but also the immediate approver is also notified via mail for POs which is above Rs.100,000.
    Note: PO above Rs.100,000 goes through immediate approver and then to the next approver in the hierarchy.
    Thanks in advance for all ur support
    and Regards,
    Asif

    Please see if (How to create a custom copy of the seeded Purchasing PO Approval Workflow POAPPRV [ID 1270010.1]) helps.
    Thanks,
    Hussein

  • How to configure workflow mail service..

    Hi Experts,
    How to configure the workflow mail server.
    I will tell you my requirement,
    i have to configure email notification for oracle application R12.1.2 , all the emails related to administration  should go to one email id, this email id is of gmail. I am not able configure it.
    Oracle application : 12.1.2
    Oracle Database : 11.1.0.7
    Please help me.
    Regards,
    Mohd Mohtasham Jeelani

    Please also see:
    How To Configure Workflow Notification Mailer To Send Email Notification For Only One Workflow Item type/Process? (Doc ID 786647.1)
    Configuring A Notification Mailer Based On A Specific Item Type. (Doc ID 415723.1)
    After Upgrade R12.1.3 All Alerts Are Completing With Signal 11 (Doc ID 1438919.1)
    Oracle Alert Response Processing Is Not Working After R12.1.3 Upgrade (Doc ID 1505620.1)
    Thanks,
    Hussein

  • Workflow Mailer setup

    Hi Guys,
    Im busy setting up a workflow mailer thru a metalink note guide but I'm a bit confused..
    I've run the following scripts
    SQL> select target_node
    from fnd_concurrent_queues where concurrent_queue_name like 'WFMLRSVC%';
    2
    TARGET_NODE
    CIBPRD01
    SQL> SELECT b.component_name,
    2 c.parameter_name,
    3 a.parameter_value
    4 FROM fnd_svc_comp_param_vals a,
    5 fnd_svc_components b,
    6 fnd_svc_comp_params_b c
    7 WHERE b.component_id = a.component_id
    8 AND b.component_type = c.component_type
    9 AND c.parameter_id = a.parameter_id
    10 AND c.encrypted_flag = 'N'
    11 AND b.component_name like '%Mailer%'
    12 AND c.parameter_name in ('OUTBOUND_SERVER', 'REPLYTO')
    13 ORDER BY c.parameter_name;
    COMPONENT_NAME
    PARAMETER_NAME
    PARAMETER_VALUE
    Workflow Notification Mailer
    OUTBOUND_SERVER
    mailhost
    Workflow Notification Mailer
    REPLYTO
    [email protected]
    COMPONENT_NAME
    PARAMETER_NAME
    PARAMETER_VALUE
    The problem is the OUT_BOUND_SEVER is set to mailhost.
    where do I get the right name for the out_buond_server??
    Thanks
    Sibusiso

    Hi Sibusiso;
    Pelase check below notes which could you helpful for your issue:
    How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1] *<< part 1) Regarding OUTBOUND_SERVER related error:*
    PS: If you dont your SMTP Ip connect wiht your local system admin
    Regard
    Helios

Maybe you are looking for