Kind attention : Chandrashekar!!!
Hi All,
Please check this Adding fields to an internal table at runtime
I've similar requirement...in this post chandrashekar's reply is very close to solution...
But I'm not able to implement in my program.. does anyone have an idea with sample code please??
seems chandra is online....
Message was edited by:
Perez C
Hi and Welcome to the Community!
As a user-to-user community, no one here can answer your question with any level of authority whatsoever. BlackBerry provides zero front line support to end users, including warranty...all support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into BlackBerry at no charge to the end user.
So, your escalation path is not here, in these forums. Rather, it is through your service center and/or place of purchase...even if they may so far not have been helpful, you have no free path by which to bypass them. You need to escalate with them to their management.
There is something called incident support, but it costs to just ask the initial question, since you are bypassing the contract you signed upon purchase. If you wish to investigate that, you can review it here:
http://us.blackberry.com/support/programs/technical/incident.html
There also might be some good reading here:
http://us.blackberry.com/legal/handheld-limited-warranty.html
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Foreign Trade Document needed- Kind attention, Mr. Hakan
Hi Hakan,
Could you please mail me the document.
[email protected]
Thanks in anticipation!!Hi Hakan,
Thanks for the docs.It will be helpful for me.May I request you to send any other config doc/Blueprint related to SD Foreign Trade, if you have one.
I am awarding u the points.
Thanks again! -
Kind Attention Please for FI/CO module
Hi Everyone,
Can anyone help me with some documents on SAP FI/CO module as I need them for reference purpose.
Looking forward to your response.
Thanks
Tarun ChaturvediHi Tarun,
Check out this previously discussed thread on FI/CO:
Following are the useful links to access good self study material on SAP different modules
http://service.sap.com/ Login ID Required (SAP Online Support, all SAP Release notes, Patches . Can be accessed.)
http://www.erpgenie.com/ Can be accessed without Login Id
http://www.easymarketplace.de/online-pdfs.php All the modules Help documentation is available
http://help.sap.com/bp_blv1470/BL_India/index.htm Best Practices is very useful other than the regular SAP Help (Basic Customization documents are available for all industry types)
http://www.asug.com/ Login Id required
http://www.sap-img.com/ Basic SAP Customization can be learnt for all modules
http://www.sapsuperusers.com/ Login Id required (Can be registered Free) Itutor and .Sim files are very useful along with SAP certification material for most of modules
http://www.sapfans.com/ Login is optional (Can be registered Free) User forums for Knowledge transfer is good.
http://www.sapfans.com/sapfans/sapfaq/sapcert.htm
Hope the above links will help you.
Regards,
Subhasha Ranjan
Reward points if answer is helpful. * -
Kind attn Mr .Ive - design issue that needs your response
Kind Attention Mr. Jonathan Ive and Team ,
I bought my Iphone 5 with mobile carrier in singapore last december .
Earlier I used Iphone 4/4s /Ipad and now I phone 5 . I am big addict of apple products , so i went for Iphone 5
Iphone 4s design was amazing with a glassy feel and no chances of scratches on to its design . But I dont feel the same in iphone 5
I am a Mechancial Design Engineer - Design is basically to relate with Customer User Interface and easeness .
But day -day usage of my Iphone 5 is frustrating because the No of white scractches to its side is going on increasing .
Am i suppose to use case always ? in that case I would have gone for some low end mobiles where nothing happen even i put it down many times .
I keep it so safe and now I am in a big frustration on getting Iphone 5 . very bad feel like losing value of money
I kindly request Mr.Johnathan Ive and concern Manufacturing dept to revert me on my issue .
Is this the design and manufacturing capability of APPLE ?
Regards
prabakarIf you have a problem with your specific iPhone and want assistance, call Apple Support or make an appointment at the Genius Bar of an Apple Store. You will not get any response from Apple by posting here or using the feedback pages (which are for comments and suggestions only, not for requests for assistance). If Apple determines that the scratches are due to a faulty coating, not user abuse, they may agree to replace your iPhone.
Regards. -
[Solved]Xorg 1.6 with nvidia 180.44 2D performance painfully slow
Hi folks,
Since the latest upgrade of Xorg and Nvidia all screen refreshes have become visibly very slow. Anything that has to redraw the whole screen takes a full second and my cpu usage jumps to 15%. The wierd thing is that glxgears is getting 200fps and looks perfectly smooth. Direct rendering is enabled and the client and server versions of the driver match. There are no errors in the Xorg.0.log apart from warnings about ACPI
I am using an Nvidia 6200 in TwinView mode with 2 identical monitors.
Here's my files/logs:
xorg.conf:
# nvidia-settings: version 1.0 (buildmeister@builder63) Tue Nov 4 14:08:09 PST 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
# Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
# Removed Option "Xinerama" "1"
Option "AutoAddDevices" "false"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "TEU TL970"
HorizSync 30.0 - 81.0
VertRefresh 40.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TEU TL970"
HorizSync 30.0 - 81.0
VertRefresh 40.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
Option "NoDRI"
EndSection
Section "Screen"
# Removed Option "TwinView" "0"
# Removed Option "TwinViewXineramaInfoOrder" "CRT-0"
# Removed Option "metamodes" "CRT-0: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-1"
Option "metamodes" "CRT-0: nvidia-auto-select +1280+0, CRT-1: nvidia-auto-select +0+0"
Option "NoLogo" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection
#Section "Extensions"
# Option "Composite" "Enable"
#EndSection
Xorg.0.log
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux vostok 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 11:11:42 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(**) Option "AutoAddDevices" "false"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI: (0@3:0:0) Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) rev 2, Mem @ 0xe0000000/16777216, 0xe3800000/16384, 0xe3000000/8388608, BIOS @ 0x????????/65536
(--) PCI:*(0@10:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe1000000/16777216, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.44 Mon Mar 23 15:29:02 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver 180.44 Mon Mar 23 15:05:32 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 0a@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "MetaModes" "CRT-0: nvidia-auto-select +1280+0, CRT-1: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-1"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV44) at PCI:10:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.10.52
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:10:0:0:
(--) NVIDIA(0): TEU TL970 (CRT-0)
(--) NVIDIA(0): TEU TL970 (CRT-1)
(--) NVIDIA(0): TEU TL970 (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): TEU TL970 (CRT-1): 400.0 MHz maximum pixel clock
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Display Devices found referenced in MetaMode: CRT-0, CRT-1
(II) NVIDIA(0): Assigned Display Devices: CRT-0, CRT-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):
(II) NVIDIA(0): "CRT-0:nvidia-auto-select+1280+0,CRT-1:nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 2560 x 1024
(--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode
(II) NVIDIA(0): "CRT-0:nvidia-auto-select+1280+0,CRT-1:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(WW) NVIDIA(0): Option "NoDRI" is not used
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard0: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/psaux"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Thanks for your kind attention.
Last edited by sekenre (2009-04-14 16:48:38)Dheart wrote:glxinfo | grep direct ?
Also try to run some game to see whether it will work.
Already done:
direct rendering: Yes
And I'm at work, no games sorry
I lowered the colour depth to 16bpp and it's a little bit faster on window refreshes. It's good enough to be usable but it's still annoying. -
HR - PA upgrade issue (4.6C to ECC6.0)
dear all,
we are currently in the process of upgrade from 4.6C to ECC6.0
and we found this minor issue in the submodule PA:
using tcode pa20/pa30 we can not see any record of IT0000 Actions using 'overview'
but the all the detail actions can be displayed..
the overview (mountain icon) can't show all the records- only happen when we want to overview the infotype IT0000 Actions.
but all the details that we have recorded in IT0000 Actions, can still be displayed (using spectacle icon)
this is only happen in IT0000 Actions
all other infotypes can be overviewed using 'mountain icon' and can be displayed using 'spectacle icon' as normal condition.
anyone ever gone through the same issue?
we have updated patch for SAP HR : SP 32 and EA 7.
the authorization is SAP ALL.
looking forward to hearing from you.
best regards,
dhenny muliawaty (pei pei)Hi Abhishek,
thanks for your reply and your guidance..
we need more information from you..
1. how to back up the table, is it right that we need to contact basis and ask our basis guy to back up the tables?
2. after we do the backup of HR table T512W, before upgrading your HR support package, then we upgrade the support package and after that..
is it right that we need to restore the table? or that the back up is use to do cross check on the content of the T512W after upgrade?
V_512W_B Valuation Bases
V_512W_C Averages
V_512W_D Processing Classes, Cumulations, and Evaluation Classes
V_512W_O Complete View T512W
V_512W_T Wage Type Texts
thanks for informing us that it's a standard practice to backup this table before applying the HR patch to system. how do you know this is a standard practice?
do you know any other additional standard practices for HR in upgrade project from 4.6C to ECC6.0?? do you have the link of this complete information?
thank you for your kind attention and support.
looking forward to hearing from you.
thanks and best regards,
dhenny muliawaty (pei pei) -
How to look for kMAT material in Testing client?
Hi PP members:
How to look for KMAT material in Test client,
Note: I went to mm60 and entered material type: KMAT it did not populate any
materials
Is there any way where I can find the materials, If yes please let me know
thanks
SurenHi Saritha:
When I went to SE16, and entered MTART as KMAT it giving the following
It is replying me back "No table entries found for specified key"
Also want to bring to your kind attention I left MATNR field blank as I donot know
the VC materials
thanks -
Matching FI Line Items and Total Records for FM
Dear Friends,
Currently, we are implementing Public Sector Management using Former Budgeting.
Some PR and PO has been created, before the FM budget data transferred from Cost Center Planning using FM9C.
Using FMRP_2FMB4002 report, the u2018Available Amountu2019 still equal to u2018Curr. Budget Amountu2019, even though we can display the detail PR and PO by double-click the column u2018Assignedu2019 and u2018Commts/Act.u2019 in this report.
After executing RFFMRC04, system shows many line items containing Fund Center, Commitment Items, and its Amount.
I need your assistance to resolve these issues, so that the FM Report can be analyzed accordingly.
Thanks for your kind attention.
Regards,
(Vincent)Hi,
This thread has been created some time ago and recieved no response. Can you please close if you feel this issue/query has been resolved in the meantime. If it has not then please provide additional information in relation to your query. By providing updates to your thread it moves you thread to the first page of thread and increases visibility and possiblity for the multiptude of experts in SDN Forums to offer their support.
Therefore please update with more information or close thread.
Thank you for your assistance.
Regards,
Brendan.
(ERP FI/CO SDN/WIKI Moderator)
http://wiki.sdn.sap.com/wiki/display/ERPFI/ERP+Financials -
How to recover lost folders and files - Pls help, help...
Some days ago I lost all of my 15 GB folders and files that stored in my Macbook Pro hard drive called DATA. I brought my Macbook pro to an experienced computer tecnicians who providing data recovery services. To his and my suprise, after checking, scanning it a few hours, he said their is no way to recover because he did not find any trails at all. The computer still seems working properly - I have no problem with any applications. There are few other folders in the DATA hard disk containing pictures, computer programs still remain. These lost folders and files contain mainly documents (word, excel, power point, pdf etc) which I accumulated in my many years working !!!!. I did not make a back up since last September partly because I think Mac is very safe.
The computer with me all the time on that day and only my son used Power Point to make a simple presentation on that evening - he can not save it on the folders the he normally use - All the folders and files are gone.
I will appreciate it very much if any of you can tell me what would be the possible causes and more importanly how to recover the lost folders and files. They are very very valuable to me.
Many thanks for your kind attention
Loimekong from Vietnam
Macbook Pro 2.4 Ghz
Intel Core 2 Duo
4 GB 1067 MhZ DDR3First, did the data actually get deleted, or is it still there somewhere? Try searching the drive for some of the documents, perhaps it's all just in another folder on that drive.
If it's truly gone, it's impossible for us to say what might have happened to make it unrecoverable. Perhaps someone using the computer used Secure Empty Trash, or securely erased empty space on the hard drive. Perhaps it was overwritten by other stuff before you noticed. It's possible the hard drive is starting to fail, though this seems like an awfully specific problem for that to be the issue.
Or perhaps the tech you took the computer to didn't know what he was doing. Why not try recovering what you can on your own? See Recovering deleted files.
You should be aware that no computer is safe. All computers rely on hardware that may fail and software that can have bugs. You absolutely MUST maintain a good set of frequently-updated backups... no fewer than two full backups of anything you don't want to lose.
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.) -
Absence Quota Carried Forward to Next Year
Hi All
hope you are doing well. I was looping around for carry forward remaining absence quota from one year to next year
Requirement:
Absence Quota for 20 days generated from 01.01.2012 to 31,12.2012, deducted 4 days on december 2012
but absence quota to next year i.e from 01.01.2013 to 31.12.2013 is showing as 20 wherein actual should be 16
Followed Woods documents at Carry Forward Absence Quota but failed
Configuration of Time Types, PCR and Schemas as folows, request your kind attention at earliest as its business critical
Configured a constant at T511k
Created two time types
For Quota
For carry forward
PCR as follows
Schema
Request your kind attention on the same, helpful/ right answers will be rewarded with points
BR
Anil
Message was edited by: Sikindar AHi Anil,
I just had a quick look at the PCRs and I think some things are wrong.
First of all ZCMO controls if it's the last day of last month or not. If it is the schema will go through ZCFL.
ZCFL reads the remain part of quota type 20. Please make sure you quota type is correct. I mean it's 20. I assume quota type is correct. PCR checks if remain of quota is equal or great than 20 then it put 20 into time type 0904.
Until here you will have remain part of quota at last day of last month in time type 0904.
Now you need a PCR to control if the date is first day of first month (01.01) reads value of 0904 and through a quota generation rule of V_T559L generate quota.
I don't understand what ZCFT is for!
Regards,
Omid -
Load an existing Berkeley DB file into memory
Dear Experts,
I have created some Berkeley DB (BDB) files onto disk.
I noticed that when I issue key-value retrievals, the page faults are substantial, and the CPU utilization is low.
One sample of the time command line output is as follow:
1.36user 1.45system 0:10.83elapsed 26%CPU (0avgtext+0avgdata 723504maxresident)k
108224inputs+528outputs (581major+76329minor)pagefaults 0swaps
I suspect that the bottleneck is the high frequency of file I/O.
This may be because of page faults of the BDB file, and the pages are loaded in/out of disk fairly frequently.
I wish to explore how to reduce this page fault, and hence expedite the retrieval time.
One way I have read is to load the entire BDB file into main memory.
There are some example programs on docs.oracle.com, under the heading "Writing In-Memory Berkeley DB Applications".
However, I could not get them to work.
I enclosed below my code:
--------------- start of code snippets ---------------
/* Initialize our handles */
DB *dbp = NULL;
DB_ENV *envp = NULL;
DB_MPOOLFILE *mpf = NULL;
const char *db_name = "db.id_url"; // A BDB file on disk, size 66,813,952
u_int32_t open_flags;
/* Create the environment */
db_env_create(&envp, 0);
open_flags =
DB_CREATE | /* Create the environment if it does not exist */
DB_INIT_LOCK | /* Initialize the locking subsystem */
DB_INIT_LOG | /* Initialize the logging subsystem */
DB_INIT_MPOOL | /* Initialize the memory pool (in-memory cache) */
DB_INIT_TXN |
DB_PRIVATE; /* Region files are not backed by the filesystem.
* Instead, they are backed by heap memory. */
* Specify the size of the in-memory cache.
envp->set_cachesize(envp, 0, 70 * 1024 * 1024, 1); // 70 Mbytes, more than the BDB file size of 66,813,952
* Now actually open the environment. Notice that the environment home
* directory is NULL. This is required for an in-memory only application.
envp->open(envp, NULL, open_flags, 0);
/* Open the MPOOL file in the environment. */
envp->memp_fcreate(envp, &mpf, 0);
int pagesize = 4096;
if ((ret = mpf->open(mpf, "db.id_url", 0, 0, pagesize)) != 0) {
envp->err(envp, ret, "DB_MPOOLFILE->open: ");
goto err;
int cnt, hits = 66813952/pagesize;
void *p=0;
for (cnt = 0; cnt < hits; ++cnt) {
db_pgno_t pageno = cnt;
mpf->get(mpf, &pageno, NULL, 0, &p);
fprintf(stderr,"\n\nretrieve %5d pages\n",cnt);
/* Initialize the DB handle */
db_create(&dbp, envp, 0);
* Set the database open flags. Autocommit is used because we are
* transactional.
open_flags = DB_CREATE | DB_AUTO_COMMIT;
dbp->open(dbp, // Pointer to the database
NULL, // Txn pointer
NULL, // File name -- NULL for inmemory
db_name, // Logical db name
DB_BTREE, // Database type (using btree)
open_flags, // Open flags
0); // File mode. defaults is 0
DBT key,data; int test_key=103456;
memset(&key, 0, sizeof(key));
memset(&data, 0, sizeof(data));
key.data = (int*)&test_key;
key.size = sizeof(test_key);
dbp->get(dbp, NULL, &key, &data, 0);
printf("%d --> %s ", *((int*)key.data),(char*)data.data );
/* Close our database handle, if it was opened. */
if (dbp != NULL) {
dbp->close(dbp, 0);
if (mpf != NULL) (void)mpf->close(mpf, 0);
/* Close our environment, if it was opened. */
if (envp != NULL) {
envp->close(envp, 0);
/* Final status message and return. */
printf("I'm all done.\n");
--------------- end of code snippets ---------------
After compilation, the code output is:
retrieve 16312 pages
103456 --> (null) I'm all done.
However, the test_key input did not get the correct value retrieval.
I have been reading and trying this for the past 3 days.
I will appreciate any help/tips.
Thank you for your kind attention.
WAN
SingaporeHi Mike
Thank you for your 3 steps:
-- create the database
-- load the database
-- run you retrievals
Recall that my original intention is to load in an existing BDB file (70Mbytes) completely into memory.
So following your 3 steps above, this is what I did:
Step-1 (create the database)
I have followed the oracle article on http://docs.oracle.com/cd/E17076_02/html/articles/inmemory/C/index.html
In this step, I have created the environment, set the cachesize to be bigger than the BDB file.
However, I have some problem with the code that opens the DB handle.
The code on the oracle page is as follow:
* Open the database. Note that the file name is NULL.
* This forces the database to be stored in the cache only.
* Also note that the database has a name, even though its
* file name is NULL.
ret = dbp->open(dbp, /* Pointer to the database */
NULL, /* Txn pointer */
NULL, /* File name is not specified on purpose */
db_name, /* Logical db name. */
DB_BTREE, /* Database type (using btree) */
db_flags, /* Open flags */
0); /* File mode. Using defaults */
Note that the open(..) API does not include the BDB file name.
The documentation says that this is so that the API will know that it needs an in-memory database.
However, how do I tell the API the source of the existing BDB file from which I wish to load entirely into memory ?
Do I need to create another DB handle (non-in-memory, with a file name as argument) that reads from this BDB file, and then call DB->put(.) that inserts the records into the in-memory DB ?
Step-2 (load the database)
My question in this step-2 is the same as my last question in step-1, on how do I tell the API to load in my existing BDB file into memory?
That is, should I create another DB handle (non-in-memory) that reads from the existing BDB file, use a cursor to read in EVERY key-value pair, and then insert into the in-memory DB?
Am I correct to say that by using the cursor to read in EVERY key-value pair, I am effectively warming the file cache, so that the BDB retrieval performance can be maximized ?
Step-3 (run your retrievals)
Are the retrieval API, e.g. c_get(..), get(..), for the in-memory DB, the same as the file-based DB ?
Thank you and always appreciative for your tips.
WAN
Singapore -
How can i add more than 500 jPanels in a jScrollPane
Hello to all ,
I am facing a problem related to adding jPanels in jScrollPane. My application needs more than 500 jpanels in the jscrollpane.where in each jPanel 4 jtextboxes, 1 comboboxes, 1 check box is there.when the check box will be clicked then the total row( ie row means the panel containing the 4 jtextboxes, 1 comboboxes, 1 check box ).and when the user will click on move up or move down button then the selected jpanel will move up or down.
The tool(sun java studio enterprise 8.1) is not allowing more Jpanels to add manually. so i have to add the jpanels by writing the code in to a loop. and the problem is that when i am trying to add the code in the code generated by the tool the code written out side the code by me is not integratable into the tool generated code.
If u watch the code here am sending u ll get what am facing the problem. The idea of creating jpanels through loop is ok but when trying to impleent in tool facing difficulties.
A example code am sending here. please tell me how i can add more panels to the scrollpane(it is the tool generated code)
Thanks in advance , plz help me for the above
package looptest;
public class loopframe extends javax.swing.JFrame {
/** Creates new form loopframe */
public loopframe() {
initComponents();
private void initComponents() {
jScrollPane1 = new javax.swing.JScrollPane();
jPanel1 = new javax.swing.JPanel();
jPanel2 = new javax.swing.JPanel();
jTextField1 = new javax.swing.JTextField();
jComboBox1 = new javax.swing.JComboBox();
jPanel3 = new javax.swing.JPanel();
jTextField2 = new javax.swing.JTextField();
jComboBox2 = new javax.swing.JComboBox();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jTextField1.setText("jTextField1");
jComboBox1.setModel(new javax.swing.DefaultComboBoxModel(new String[] { "Item 1", "Item 2", "Item 3", "Item 4" }));
org.jdesktop.layout.GroupLayout jPanel2Layout = new org.jdesktop.layout.GroupLayout(jPanel2);
jPanel2.setLayout(jPanel2Layout);
jPanel2Layout.setHorizontalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.add(28, 28, 28)
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 109, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(54, 54, 54)
.add(jComboBox1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 156, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(35, Short.MAX_VALUE))
jPanel2Layout.setVerticalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jComboBox1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addContainerGap(21, Short.MAX_VALUE))
jTextField2.setText("jTextField2");
jComboBox2.setModel(new javax.swing.DefaultComboBoxModel(new String[] { "Item 1", "Item 2", "Item 3", "Item 4" }));
org.jdesktop.layout.GroupLayout jPanel3Layout = new org.jdesktop.layout.GroupLayout(jPanel3);
jPanel3.setLayout(jPanel3Layout);
jPanel3Layout.setHorizontalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel3Layout.createSequentialGroup()
.add(20, 20, 20)
.add(jTextField2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 111, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(33, 33, 33)
.add(jComboBox2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 168, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(40, Short.MAX_VALUE))
jPanel3Layout.setVerticalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel3Layout.createSequentialGroup()
.add(21, 21, 21)
.add(jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jComboBox2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jTextField2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addContainerGap(21, Short.MAX_VALUE))
org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
jPanel1.setLayout(jPanel1Layout);
jPanel1Layout.setHorizontalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jPanel3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addContainerGap(58, Short.MAX_VALUE))
jPanel1Layout.setVerticalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.add(21, 21, 21)
.add(jPanel2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(49, 49, 49)
.add(jPanel3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(66, Short.MAX_VALUE))
jScrollPane1.setViewportView(jPanel1);
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(31, 31, 31)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 439, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(74, Short.MAX_VALUE))
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(30, 30, 30)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 254, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(55, Short.MAX_VALUE))
pack();
}// </editor-fold>
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new loopframe().setVisible(true);
// Variables declaration - do not modify
private javax.swing.JComboBox jComboBox1;
private javax.swing.JComboBox jComboBox2;
private javax.swing.JPanel jPanel1;
private javax.swing.JPanel jPanel2;
private javax.swing.JPanel jPanel3;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JTextField jTextField1;
private javax.swing.JTextField jTextField2;
// End of variables declaration
and
package looptest;
public class Main {
public Main() {
public static void main(String[] args) {
new loopframe().setVisible(true);
}Thanks for here kind attention to solve my problem.
I am thinking to create the classes separately for the components (i.e the jpanel, combobox,textbox etc)and call their instaces from the for loop .But the problem is the jpanel will contain the other components and that jpanels (unlimited jpanels will be added later)will be later added to the jscrollpane.
By writing code, the problem is to place components( the comboboxes,textboxes etc placed on the jpanel ) in appropriate coordinates . So i am doing it through tool .
I am sending here the sample code related to my actual need . In this i have taken a jScrollPane, on that i have added jPanel1 and on jPanel1 i have added jPanel2.On jPanel2 jTextField1, jComboBox1,jCheckBox are added. If the u ll see the code u can understand what problem i am facing.
If i am still not clearly explained ,please ask me. plz help me if u can as u have already handled a problem similar to this.
package addpanels;
public class Main {
/** Creates a new instance of Main */
public Main() {
public static void main(String[] args) {
new addpanels().setVisible(true);
} and
package addpanels;
public class addpanels extends javax.swing.JFrame {
/** Creates new form addpanels */
public addpanels() {
initComponents();
private void initComponents() {
jScrollPane1 = new javax.swing.JScrollPane();
jPanel1 = new javax.swing.JPanel();
jPanel2 = new javax.swing.JPanel();
jTextField1 = new javax.swing.JTextField();
jComboBox1 = new javax.swing.JComboBox();
jCheckBox1 = new javax.swing.JCheckBox();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jTextField1.setText("jTextField1");
jComboBox1.setModel(new javax.swing.DefaultComboBoxModel(new String[] { "Item 1", "Item 2", "Item 3", "Item 4" }));
jCheckBox1.setText("jCheckBox1");
jCheckBox1.setBorder(javax.swing.BorderFactory.createEmptyBorder(0, 0, 0, 0));
jCheckBox1.setMargin(new java.awt.Insets(0, 0, 0, 0));
org.jdesktop.layout.GroupLayout jPanel2Layout = new org.jdesktop.layout.GroupLayout(jPanel2);
jPanel2.setLayout(jPanel2Layout);
jPanel2Layout.setHorizontalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 131, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jComboBox1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 144, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jCheckBox1)
.addContainerGap(39, Short.MAX_VALUE))
jPanel2Layout.setVerticalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel2Layout.createSequentialGroup()
.addContainerGap(17, Short.MAX_VALUE)
.add(jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jComboBox1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jCheckBox1))
.addContainerGap())
org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
jPanel1.setLayout(jPanel1Layout);
jPanel1Layout.setHorizontalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jPanel2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(34, Short.MAX_VALUE))
jPanel1Layout.setVerticalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.add(26, 26, 26)
.add(jPanel2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(152, Short.MAX_VALUE))
jScrollPane1.setViewportView(jPanel1);
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap(36, Short.MAX_VALUE)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 449, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(18, 18, 18))
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(32, 32, 32)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 230, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(38, Short.MAX_VALUE))
pack();
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new addpanels().setVisible(true);
// Variables declaration - do not modify//GEN-BEGIN:variables
private javax.swing.JCheckBox jCheckBox1;
private javax.swing.JComboBox jComboBox1;
private javax.swing.JPanel jPanel1;
private javax.swing.JPanel jPanel2;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JTextField jTextField1;
// End of variables declaration//GEN-END:variables
} -
APP-V 5.0 VDI A Temporary Profile is created when I log into the Virtual Desktop
Dear Sirs
I'm Enzo , an Italian System Engineer. Together with other fellows we created a test environment :
- a VDI machine (POC-VDI,10.102.94.219, Windows Server 2012 R2) with
RD Web Access, RD Connection Broker, RD Virtualization Host, RD Session Host Installed
The Hyper-V Environment includes :
- DHCP Server (to provide addresses to Virtual Desktop Collections)
- APP-V_5.0_Server , Application Virtualization Management Console 5.0, with 2 published packages (Office 2010 and Open Office 4)
- Sequencer_W8-1, Application Virtualization Sequencer 5.0
- Client_8-1 , Client Windows 8.1 with Application Virtualization Client 5.0
From the Client_8-1 we can download and run the two published packages from the server (user VDI_TEST_1)
The Client_8-1 has been used as the template (sysprep /oobe /generalize /shutdown) for the Virtual Dektop (APP-0 and APP-1)
included in the collection 'APPV' (Pooled, Automatically Manage Virtual Desktop, Roll Back Virtual Desktops Enabled).
I connect to the 'RD Web Access' ( http 10.102.94.219 RDWeb, user VDI_TEST_1) , I then connect to APPV collection .
When I get logged into the Virtual Desktop (APP-0 or APP-1, user VDI_TEST_1), a Temporary Profile is created. Why ?
We configured :
User Profile Disk : share Location 10.102.94.219 UPD
UPD : Share Everyone Full Control
Security SYSTEM Full Control
Network Service
Full Control
POC-VDI$ Full
Control
Administrators (POC-VDI\Aministrators)
Full Control
Users (POC-VDI\Users)
Read & Execute
I am puzzled as long as when I get logged into the Virtual Desktop, a Temporary Profile is created. Why ?
Thanks in advance for your kind attention
EnzoHighly unlikely it has anything to do with App-V.
Start troubleshooting by looking at permissions on shares and folder under the shares for the profile.
Tim Mangan MVP for App-V and Citrix CTP Author of AppV books: "The Client Book" and "OSD Reference Book" (http://www.tmurgent.com/Books ) -
Single Printing for Multiple ALVs in Splitter Containers
Hi,
I am creating multiple ALVs (3 to 4) of CL_GUI_ALV_GRID class in my report. The ALVs are being displayed inside the splitter containers of class CL_GUI_SPLITTER_CONTAINER. My question is how to print all the ALVs inside these multiple containers with a single execution? I've found a close answer to this at this thread but it is using the REUSE_ALV... function.
How to print multiple ALV Grids with only one print dialog?
Is there a way to do this by making use of the CL_GUI_ALV_GRID printing functionality, if there is?
Thanks for your kind attention,
Kamal.-found alternative.
-
Use 2 carriers on at a time and keep the settings active?
Can somebody please advice me on the following: I use 1 Dutch Vodafone BB subsription + device while in Europe and 1 Indonesian Telkomsel BB subsription + device while in Asia. I now would like to go back to 1 device and replace my Dutch or Indonesian SIM card when in Europe or Asia.
Is it possible to change my Device PIN + IMEI with both service providers so they both have the same PIN and IMEI?
Thank you for your kind attention.Hello gotcha444 and welcome to the forums!
Here is a link to a thread that will hlep you out.
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryInternetSolution&message.id...
Let me know if you need any further information.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!
Maybe you are looking for
-
It's been a while since I've synced with my computer (yes, I'm still on iOS 4.0). Tonight I finally synced all my music, apps, purchases, etc. Tried to import all photos into iPhoto (tried 3 times) and about a third of the way through my 3,000 files
-
Printing in Illustrator 5 with a file created in Illustrator 4-crash!
I have a brand new system running on Snow Leopard (10.6.2). Most of the files I'm working on were created in Creative Suite 4. So when I go to open a file created in a Illustrator 4 program in my new Illustrator 5 program, it crashes when I go to fil
-
External monitor resultion problem: black borders
I use a Hanns-G HW191D 19" external flatscreen with my Macbook. It is a wide screen with 1440x900. The problem is that I cannot use all of that space when I'm in the Mac OS. I can use it (to the edges of the screen) when I use Boot Camp in Windows XP
-
Distance Algorithm. Please help!
I need to find an algorithm for calculating the closest point to each point contained in a given array. That is, for each point in an array of randomly generated points, I need to find the point closest to it other than itself. I already have a basic
-
i just tried to update ios, and now my phone wants me to connect to itunes. I dont have a PC anymore. what can I do?