Kind of lost but a quick question

Hello,
I've been needing to get myself an ipad to keep up with things, but i'm a but lost in how it all works. I see that verizon offers Ipad support, but they sell the Ipad (original) with their mifi 2200. Now the plan i'm on, I already have the 2200 (just use the mobile hotspot with verizon, no phone or anything)
What i'm curious about is would I have to pay anything extra to use the Ipad? I would have asked this at a verizon forum but it's more specific to apple itself; I'm not sure if i would need to pay apple a service fee to use their apps or services, or if verizon bills me in complete, and if i would even have topay extra considering i already use their internet service (which the non 3G units need to go online and work, and i'm not wanting to spend extra on a 3G unit when i already own the devices to run the ipad)

If you already have mifi service with Verizon all you need is an iPad. No extra charges and no service charges to Apple.

Similar Messages

  • HT201472 can you guys please help me find my ipod because i lost it a week ago and i cant find it i've been trying really hard to find it but i cant cause i didn't set up find my phone before i lost it so my question is can you help me someway here my

    can you guys please help me find my iPod because i lost it a week ago and i cant find it I've been trying really hard to find it but i cant cause i didn't set up find my phone before i lost it so my question is can you help me someway  or somehow because my iPod i love it i would always take pictures with my friends and i have all my memories in it so i don't know where it is for all i know it could be on the street getting ready to get ran over because the last time i ever saw it was on last Sunday when i went to my cousins house when we were leaving i grabbed something to eat then i sat at the table then i left but i swear i had it in my pocket when i left but i didn't so i asked my cousin if he could look for it and he said sure so he started looking for it but didn't find anything and so i lost it sense and i asked my dad if i could get a new one and he said in a couple of years but i want that iPod back it has all my memories in it it's really special to me and i'm really desperate so please help me someway somehow anyway just help me please i don't know what else to do but beg for someone to help me because I've tried looking for it in my car in my room in my coats and nothing i tried looking for it on the website find my iPhone/iPod/iPad and it didn't help so please help me i beg of you if you are reading this and don't care you really are heartless because a little 12 year old girl can't find the most precious thing she got from her father 1 year ago and if you are reading this and you have a heart please help me find it if you do want to help me find it****
    <Personal Information Edited by Host>

    You are not addressing Apple here. We are all just users like yourself
    lost/stolen                                     
    No app on the iOS device is required.                           
    - If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
    - You can also wipe/erase the iOS device and have the device play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
    - There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • HT201269 Hi I've been using apple products for sometime now , I have one iPad , & 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID

    Hi I've been using apple products for sometime now , I have one iPad , &amp; 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID ?

    If you have registered all your Apple products, you can see them at:
    https://supportprofile.apple.com

  • HT1459 iPod touch iPod touch lost in snow 2 mos, found yesterday songs played ok today charged fully but lost charge very quickly is there something I can do to try to fix before taking in for service?

    iPod touch
    iPod touch lost in snow 2 mos, found yesterday songs played ok today charged fully but lost charge very quickly. What can I do to try to fix this myself before sending it in for repair?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • Currently have 10.4 but want to install snow leopard....quick question!!!

    hey guys, i just have a quick question about my itunes
    i have my music arranged by date added, which is very important
    this is how i have it:
    what i want to know is: is there a way to install the new OS, and somehow keep the music in the order that it is right now?
    thanks a lot!!!! ----arthur

    You'll probably get more help at the iTunes forum.
    http://discussions.apple.com/forum.jspa?forumID=789

  • Two quick questions about Library after moving beginning on a new computer

    Hi there,
    I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
    Just a couple of quick questions.
    1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file.  Is this incorrect? Should I have imported a different file? Should I have used the itl file instead? 
    If so, should I delete the library and start again?  (if this is the case, please suggest the best way of doing this without affecting my media)
    - a kind of sub-question to this one:  some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD.  Is there a way I can find out which ones havent been recognized by iTunes?  Whats the best way of getting them in to my library?
    2. Pretty much half of my podcasts have not been loaded in the new iTunes.  The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes.  When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes?  Or is there a risk that they will be deleted from my iPhone?
    Cheers,

    The .xml is lacking some information such as ratings, date added, and play count.  Using the .itl includes this information but cannot be imported using the method you did.
    A complete library is everything in the iTunes folder.  By using the method you did you left the artwork behind in the artwork folder on the other machine.
    Selecting the media folder in preferences does not get iTunes to recognize the media.  All it does is tell iTunes to start storing new media in that location.
    Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
    You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391

  • 2 Quick Question

    Hello - I'm pretty new to Motion and have 2 quick questions:
    1) If you've got a bunch of keyframes on a timeline and want to make the entire sequence longer - is there a way to just pull the last frame out and have it automatically interpolate the keyframes in between so that it keeps the same timing and everything... it just makes the whole sequence take longer?
    2) On the same timeline with a bunch of keyframes, can you apply one long Interpolation (ala "Ease Out") to the entire thing from A-Z so that the whole sequence eases out rather than just keyframe to keyframe?
    Thanks!!
    Jason

    Heya,
    1. If you're asking if you have something like the "roving" keyframes in AE...well, kinda. Keyframes on footage, shapes, generators, particles, replicators—objects that create an image—don't seem to scale. But keyframes on secondary objects like behaviors and filters do scale.
    2. Very easy: go into the Keyframe Editor and click on the animation state icon/menu for the parameter you want to change. The icon/menu is the last column after the parameter's value in the left-hand side of the Keyframe Editor. If you pick an interpolation type in that menu, it applies it to all keyframes in that particular curve. It's also the same place where you can set the before/after extrapolation, like ping-pong, progressive, etc.

  • Quick Question (re:exporting from iMovie into iDVD)

    Hello everyone!
    I just have a quick question for you all... (I want to see if this is normal - I'm on a deadline and this is kind of freaking me out)
    So, we have a 20 minute or so video in iDVD. It plays fine, etc etc. The goal is to burn it to a DVD.
    I used the "Export -> to iDVD" function in iMovie, which launched iDVD.
    But here is the weird thing: nothing comes up in iDVD. It doesn't make a new file, doesn't give me anything... it is just open, waiting for me to create a new project to work with.
    YET, if I look in the Activity Monitor, I do see that EncoderServer (using 123% CPU) and ThumbnailServer (both iDVD processes) are running.... but shouldn't iDVD have told me it is working or that it is dealing with data?
    This is very un-"apple". I totally would have expected a progress bar of some sort in iDVD telling me it is working or something.... or is something wrong and I should try to export it in a different way?
    (I guess the underlying question is: when you export from iMovie to iDVD, does iDVD normally give you any 'heads-up' that it is working? how long does it normally take to open the project in iDVD?)

    Hi Matt!
    when you export from iMovie to iDVD, does iDVD normally give you any 'heads-up' that it is working? how long does it normally take to open the project in iDVD?)
    Yes, and it's instant.
    What you should see is iDVD opening and asking you to create a new project, It will suggest naming it the same as the iMovie project.
    There are reports that exporting from Imovie to iDVD can produce problems. What I do is save the iMovie project and close iMovie. Open iDVD, create the new DVD project, then go the File menu in iDVD, scroll down to Import, and in the side menu select Video. This open your Movie Folder, wherein resides your iMovie project. Select it and it imports into iDVD in a flash.
    Remember: iMovie projects go in the Movies Folder, iDVD projects go in the Documents folder. Change that, and they get very confused and unhappy.

  • Quick Question: Setting Render File Location

    Hi all,
    Quick question. I'm guessing with all the disappointment, the answer will be no, but I fully realize that I could have overlooked something so its worth asking!
    In FCP7 (familiar phrase huh?) you could explicitly set a location for render files. I understand that you can save FCPX Events on different drives, as well as your projects, however it appears as if the Render Files are getting saved with a folder which also contains your .fcp project file.
    I ask because I like having my project file on my internal so my Time Machine will pick it up when I have it hooked up, but all of those render files take up loads of space and I'd like that on my external media drive instead.
    Is there:
    a.) A way to tell FCPX to store Render Files in a different location
    OR
    b.) A way to move the Render Files to a different location without screwing up FCPX's ability to recognize the project and load it properly.
    If so, great! If not, I'll send it along as a suggestion among with some others. Other than those overlooked technical aspects, I'm kind of digging the UI of FCPX and background rendering is saving me so much time its not even funny.

    Hi Jorgen
    I spent a bit of time on this today without any success.
    In our studio, it's only me that edits... but I use a laptop and a macpro when things get serious. I have a RAID array tyed to the Macpro, and I access it with my laptop via gigabit ethernet.
    I created aliases, and when I opened FCPX, nothing appeared. I also was not able to change the name of events I created, and while it would write the project name and events to the new aliased directories... when I reopened FCPX the events and projects were missing.
    I then tried symbolic links via the terminal. No luck. I then checked ownership permissions, and made sure the permissions were ignored for the drive and everything was world readable and writable. No luck.
    Have you had a chance to experiment with this yet?
    Thanks

  • Report Generation Toolkit Error Quick Question

    Hi,
         I created the most awesome LabVIEW report ever at my desk using a trial version of the RGT and Office 2003.  I took this to my production machine and ")@#(&%(*#^%()^!!!"  The production machine has office 2007 and a fully licensed version of the RGT.  Both machines have LabVIEW 8.6.0.  I've read all the stuff about these errors and something about classes and dll's and whatnot's.  So my quick question, is:  Instead of matching the versions of Microsoft Office as recommended, can I just rewrite from scratch the VI that creates this world's most awesome LabVIEW report on the production machine to create the same effect? 
    Solved!
    Go to Solution.

    Hi 
    Quick Answer: Probably
    Slower answer: Microsoft changed a lot of things behind the scenes in Office 2007, but the Report Generation toolkit version 1.1.3 supports Office 2007 so you should be good to go. Depends on what functions are included in your VI. Liek the read me says "Several default settings in Microsoft Office 2007 differ slightly from previous versions. Reports you generate using Office 2007 might look different than reports you generate from other versions of Office because font sizes, cell sizes, and so on, differ."
    Best Regards
    David
    NISW

  • Quick question re select-options

    Hi
    I am relatively new to ABAP but have a quick question:
    I need to create a select-options which does the following:
    1. Allows ONLY "equals" signs
    2. Disallows intervals
    3. Disallows the use of ranges in the multiple selection box.
    4. Allows multiple individual selections.
    I can achieve most using the following:
    select-options s_knvh for knvh-kunnr no intervals.
    However, this still allows ranges using the multiple selection box, and also allows the "not equal to" option.
    Adding the "no-extension" syntax simply removes my ability to use multiple individual entries.
    Any ideas?
    Thanks
    Jon

    Use this FM.
    SELECT_OPTIONS_RESTRICT

  • QUICK QUESTION ABOUT PORTS

    Hi, I have a quick question about port forwarding/mapping. My question, lets say I am running MSN messenger, who's ports are 6880-6900. But lets say I am running a torrent application or something else that requires those ports. If both applications were running at the same time, would this cause interference with them on the same ports or now. Thanks
    Nathan

    Normally, only one application can listen to a specific port number at a time. If MSN is grabbing those 21 ports then your torrent app won't be able to run.
    However, most apps don't work that way - even if they use multiple ports, they don't use them all at the same time, so MSN might use 6880 when it starts up, leaving the others open for other applications to use if needed.
    Only experimentation will answer that one.

  • Quick Question: When to use ( ) and when to use [ ] and why the ( *)

    Hi all,
    A quick question that i'm sure is very simple but is slightly confusing me. I've just started trying to learn Objective-C and am a little confused by ( ) and [ ].
    I get that you use the [ ] brackets when you want something specific from an object, i.e.
    [ textField textColor ]
    and that you use ( ) brackets for things like:
    if ( x == y) {
    But I get confused when I see things like:
    NSLog(@"some text here");
    Why does that get ( ) brackets and why is it not [ ].
    Also another point of confusion, creating methods... Why are some methods done like:
    - (void)awakeFromNib
    And others done like (with the additional "*" added):
    - (NSString *)stringvalue
    As I said, I'm sure this is very simple and obvious, but it is confusing me slightly.
    Thanks in advance!

    Adam:
    As you already know, square brackets are used to send a message to an object, so if a object like myObject implements the method -doSomething, you can call it with:
    \[myObject doSomething\];
    The other use square for brackets have is to index C-style arrays, such as:
    aValue = anArray\[10\]; // Get the 10-element of an array
    However, because C-style arrays are rarely used in Cocoa applications (use NSArray instead) you will not see this situation often.
    Parenthesis in expressions are used to group and prioritize, such as:
    x = 10 * (3 + 5); // x = 80
    If () statements use it to delimit the test expression. Same with while (). for () uses it to enclose the limits and increment statements, etc.
    The other important use of parenthesis is in calling a C function:
    result = foo(3);
    means that you are calling the function named foo with the argument 3, and storing the the return value in the variable 'result'. This is different from a message because a C function is not a method of an object. They exist independently of any objects. NSLog() is a function defined within Cocoa but it is not a method. So, you call it with the traditional C function call syntax. Cocoa defines other functions like NSStringFromRect(), which takes an NSRect as argument and returns a pointer to an NSString.
    And that leads me to your last question. Some methods return simple types, like int, float, or void (i.e. returns no value). These methods will have prototypes like:
    \- \(void\)returnNothing;
    \- (int)returnInteger;
    Other methods return pointers to types, like:
    \- (int \*)returnPointerToInteger;
    \- (void \*)returnPointerToAnything; // In obj-C one typically uses id instead of void*
    Returning whole objects from methods has problems and it is better to just return a pointer (the address in memory) instead:
    \- (NSString *)makeAString;
    The method above returns a pointer to an NSString rather than the entire object.
    Good luck with your learning,
    Juan-Pablo
    Message was edited by: Juan Pablo Claude

  • Quick question regarding best practice and dedicating NIC's for traffic seperation.

    Hi all,
    I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc.  I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this.  What I mean is ...
    -     Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
    -    Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
    During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch?  Is there some sort of ranking order of priority /importance?  FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

    I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen?  Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc 

  • Quick question, where to put global variables

    Very quick question:
    where is the best place to put global variables,
    (e.g. a flag that turns on debug mode)
    if they are needed by the entire application?
    I'm guessing they should be placed in their own class.
    But should I make them public static final constants,
    and just do Globals.MYCONSTANT
    OR should i do "implements Globals" in all my other classes?
    The first way seems simpler and more logical,
    but in the examples for JSDT, they use the second technique.
    Any thoughts?
    thanks! =)

    I would suggest either creating a properties file for your globals, or adding them to the system properties at startup. Placing items like debugging tags in your code means that you have to change the code, recompile, and rejar before your change is implemented. Using system properties means that you simply have to change your command-line options (i.e., from -Dmyapp.debug=true to -Dmyapp.debug=false).
    Shaun

Maybe you are looking for