Kind of system "freeze"
I quoted freeze because system is actually still working, I can run some applications like rxvt but most of functionality is missed.
For example, ps ax stops at a certain line, kill doesn't work, top has restricted functionality and doesn't kill processes.
I can not login into tty but opened tty session works with some restrictions. Halt or reboot do not stop the system and stack at killing some processes.
However, magic-sysrq key works fine.
Theses freezes start from chromium (maybe somehow related to flash) and also concern preload daemon, because kernel says:
Apr 25 02:50:43 localhost kernel: [124851.469282] chromium D c4ec1f40 0 26545 6277 0x00000000
Apr 25 02:50:43 localhost kernel: [124851.469289] c4ec1f50 00200086 00000002 c4ec1f40 ec789b04 00000000 00000009 00000000
Apr 25 02:50:43 localhost kernel: [124851.469298] ffffffe8 00000000 00200286 f5407578 29f5c067 f5406380 c14c0380 f30740b0
Apr 25 02:50:43 localhost kernel: [124851.469306] f3074274 c5949600 c10d9f99 c14c0380 f5406380 f30740b0 c1429f60 b0468000
Apr 25 02:50:43 localhost kernel: [124851.469314] Call Trace:
Apr 25 02:50:43 localhost kernel: [124851.469327] [<c10d9f99>] ? __pte_alloc+0xa9/0x100
Apr 25 02:50:43 localhost kernel: [124851.469333] [<c10dd0f9>] ? handle_mm_fault+0x109/0x200
Apr 25 02:50:43 localhost kernel: [124851.469340] [<c1027530>] ? do_page_fault+0x0/0x430
Apr 25 02:50:43 localhost kernel: [124851.469344] [<c10276c3>] ? do_page_fault+0x193/0x430
Apr 25 02:50:43 localhost kernel: [124851.469351] [<c1139663>] ? sys_epoll_wait+0x63/0x310
Apr 25 02:50:43 localhost kernel: [124851.469361] [<c1319b35>] rwsem_down_failed_common+0x95/0xe0
Apr 25 02:50:43 localhost kernel: [124851.469367] [<c1319b92>] rwsem_down_write_failed+0x12/0x20
Apr 25 02:50:43 localhost kernel: [124851.469372] [<c1319bfa>] call_rwsem_down_write_failed+0x6/0x8
Apr 25 02:50:43 localhost kernel: [124851.469377] [<c13193a5>] ? down_write+0x15/0x17
Apr 25 02:50:43 localhost kernel: [124851.469383] [<c10e14cf>] sys_munmap+0x2f/0x60
Apr 25 02:50:43 localhost kernel: [124851.469389] [<c10037df>] sysenter_do_call+0x12/0x28
Apr 25 02:50:43 localhost kernel: [124851.469398] [<c131007b>] ? init_idle+0x1d4/0x275
Apr 25 02:50:43 localhost kernel: [124851.469400] [<c1310000>] ? init_idle+0x159/0x275
Apr 25 02:52:43 localhost kernel: [124971.402134] preload D f3653ed0 0 2325 1 0x00000000
Apr 25 02:52:43 localhost kernel: [124971.402141] f3653ee0 00000086 00000002 f3653ed0 c4056380 f3653f00 c57c2780 00000000
Apr 25 02:52:43 localhost kernel: [124971.402150] c110ed6d 0000416d 00000001 f4185780 f3653e78 f5586380 c14c0380 f3a6f020
Apr 25 02:52:43 localhost kernel: [124971.402158] f3a6f1e4 c114cc60 f3653ed4 c14c0380 f5586380 f3a6f020 f406da90 f585a740
Apr 25 02:52:43 localhost kernel: [124971.402167] Call Trace:
Apr 25 02:52:43 localhost kernel: [124971.402178] [<c110ed6d>] ? do_lookup+0xdd/0x260
Apr 25 02:52:43 localhost kernel: [124971.402187] [<c114cc60>] ? proc_pid_follow_link+0x0/0x40
Apr 25 02:52:43 localhost kernel: [124971.402194] [<c111de95>] ? mntput_no_expire+0x25/0xd0
Apr 25 02:52:43 localhost kernel: [124971.402199] [<c111df53>] ? mntput+0x13/0x20
Apr 25 02:52:43 localhost kernel: [124971.402208] [<c1319b35>] rwsem_down_failed_common+0x95/0xe0
Apr 25 02:52:43 localhost kernel: [124971.402214] [<c1319bb2>] rwsem_down_read_failed+0x12/0x14
Apr 25 02:52:43 localhost kernel: [124971.402220] [<c1319bef>] call_rwsem_down_read_failed+0x7/0xc
Apr 25 02:52:43 localhost kernel: [124971.402222] [<c131938d>] ? down_read+0xd/0x10
Apr 25 02:52:43 localhost kernel: [124971.402225] [<c114e948>] get_mm_exe_file+0x18/0x40
Apr 25 02:52:43 localhost kernel: [124971.402226] [<c114e9ae>] proc_exe_link+0x3e/0x90
Apr 25 02:52:43 localhost kernel: [124971.402229] [<c114cccf>] proc_pid_readlink+0x2f/0xc0
Apr 25 02:52:43 localhost kernel: [124971.402232] [<c1119adc>] ? touch_atime+0x5c/0x140
Apr 25 02:52:43 localhost kernel: [124971.402234] [<c111df53>] ? mntput+0x13/0x20
Apr 25 02:52:43 localhost kernel: [124971.402237] [<c1108ea9>] sys_readlinkat+0x89/0x90
Apr 25 02:52:43 localhost kernel: [124971.402239] [<c1108ed7>] sys_readlink+0x27/0x30
Apr 25 02:52:43 localhost kernel: [124971.402243] [<c10037df>] sysenter_do_call+0x12/0x28
Apr 25 02:52:43 localhost kernel: [124971.402263] chromium D c5a1ff2c 0 26540 6277 0x00000000
Apr 25 02:52:43 localhost kernel: [124971.402266] c5a1ff3c 00200086 00000002 c5a1ff2c c5a1fea8 c110dc05 000080c2 0239fc82
Apr 25 02:52:43 localhost kernel: [124971.402269] c111158e 00000026 00000180 c33fb000 000080c3 f5406380 c14c0380 f3070450
Apr 25 02:52:43 localhost kernel: [124971.402273] f3070614 c11aaa34 c5a1ff60 c14c0380 f5406380 f3070450 c1429f60 b44766d4
Apr 25 02:52:43 localhost kernel: [124971.402276] Call Trace:
Apr 25 02:52:43 localhost kernel: [124971.402279] [<c110dc05>] ? path_put+0x15/0x20
Apr 25 02:52:43 localhost kernel: [124971.402281] [<c111158e>] ? do_filp_open+0x14e/0x6a0
Apr 25 02:52:43 localhost kernel: [124971.402285] [<c11aaa34>] ? copy_to_user+0x34/0x50
Apr 25 02:52:43 localhost kernel: [124971.402288] [<c1319b35>] rwsem_down_failed_common+0x95/0xe0
Apr 25 02:52:43 localhost kernel: [124971.402290] [<c1319b92>] rwsem_down_write_failed+0x12/0x20
Apr 25 02:52:43 localhost kernel: [124971.402292] [<c1319bfa>] call_rwsem_down_write_failed+0x6/0x8
Apr 25 02:52:43 localhost kernel: [124971.402294] [<c13193a5>] ? down_write+0x15/0x17
Apr 25 02:52:43 localhost kernel: [124971.402303] [<c10e11f0>] sys_mmap_pgoff+0xd0/0x1c0
Apr 25 02:52:43 localhost kernel: [124971.402307] [<c10037df>] sysenter_do_call+0x12/0x28
Apr 25 02:52:43 localhost kernel: [124971.402312] [<c1310000>] ? init_idle+0x159/0x275
Apr 25 02:52:43 localhost kernel: [124971.402317] chromium D c4ec1f40 0 26545 6277 0x00000000
Apr 25 02:52:43 localhost kernel: [124971.402319] c4ec1f50 00200086 00000002 c4ec1f40 ec789b04 00000000 00000009 00000000
Apr 25 02:52:43 localhost kernel: [124971.402323] ffffffe8 00000000 00200286 f5407578 29f5c067 f5406380 c14c0380 f30740b0
Apr 25 02:52:43 localhost kernel: [124971.402326] f3074274 c5949600 c10d9f99 c14c0380 f5406380 f30740b0 c1429f60 b0468000
Apr 25 02:52:43 localhost kernel: [124971.402329] Call Trace:
Apr 25 02:52:43 localhost kernel: [124971.402332] [<c10d9f99>] ? __pte_alloc+0xa9/0x100
Apr 25 02:52:43 localhost kernel: [124971.402334] [<c10dd0f9>] ? handle_mm_fault+0x109/0x200
Apr 25 02:52:43 localhost kernel: [124971.402338] [<c1027530>] ? do_page_fault+0x0/0x430
Apr 25 02:52:43 localhost kernel: [124971.402339] [<c10276c3>] ? do_page_fault+0x193/0x430
Apr 25 02:52:43 localhost kernel: [124971.402343] [<c1139663>] ? sys_epoll_wait+0x63/0x310
Apr 25 02:52:43 localhost kernel: [124971.402346] [<c1319b35>] rwsem_down_failed_common+0x95/0xe0
Apr 25 02:52:43 localhost kernel: [124971.402348] [<c1319b92>] rwsem_down_write_failed+0x12/0x20
Apr 25 02:52:43 localhost kernel: [124971.402350] [<c1319bfa>] call_rwsem_down_write_failed+0x6/0x8
Apr 25 02:52:43 localhost kernel: [124971.402352] [<c13193a5>] ? down_write+0x15/0x17
Apr 25 02:52:43 localhost kernel: [124971.402354] [<c10e14cf>] sys_munmap+0x2f/0x60
Apr 25 02:52:43 localhost kernel: [124971.402356] [<c10037df>] sysenter_do_call+0x12/0x28
Apr 25 02:52:43 localhost kernel: [124971.402358] [<c131007b>] ? init_idle+0x1d4/0x275
Apr 25 02:52:43 localhost kernel: [124971.402361] [<c1310000>] ? init_idle+0x159/0x275
Apr 25 02:52:43 localhost kernel: [124971.402365] chromium D ec721ed0 0 26565 6277 0x00000000
Apr 25 02:52:43 localhost kernel: [124971.402367] ec721ee0 00200086 00000002 ec721ed0 ec721e64 ec721e9c ec721f98 00000000
Apr 25 02:52:43 localhost kernel: [124971.402371] 00000001 af6f1d78 00000000 ffffff92 ec721e70 f5586380 c14c0380 f3a6f8c0
Apr 25 02:52:43 localhost kernel: [124971.402374] f3a6fa84 ec721e70 f3a6f8c0 c14c0380 f5586380 f3a6f8c0 f406da90 00000000
Apr 25 02:52:43 localhost kernel: [124971.402377] Call Trace:
Apr 25 02:52:43 localhost kernel: [124971.402382] [<c1072b1d>] ? get_futex_key+0x6d/0x1d0
Apr 25 02:52:43 localhost kernel: [124971.402384] [<c1073185>] ? futex_wake+0xe5/0x100
Apr 25 02:52:43 localhost kernel: [124971.402386] [<c1319b35>] rwsem_down_failed_common+0x95/0xe0
Apr 25 02:52:43 localhost kernel: [124971.402389] [<c1027530>] ? do_page_fault+0x0/0x430
Apr 25 02:52:43 localhost kernel: [124971.402391] [<c1319bb2>] rwsem_down_read_failed+0x12/0x14
Apr 25 02:52:43 localhost kernel: [124971.402393] [<c1319bef>] call_rwsem_down_read_failed+0x7/0xc
Apr 25 02:52:43 localhost kernel: [124971.402395] [<c131938d>] ? down_read+0xd/0x10
Apr 25 02:52:43 localhost kernel: [124971.402397] [<c102768a>] do_page_fault+0x15a/0x430
Apr 25 02:52:43 localhost kernel: [124971.402399] [<c106ae44>] ? ktime_get_ts+0xe4/0x110
Apr 25 02:52:43 localhost kernel: [124971.402401] [<c11aaa34>] ? copy_to_user+0x34/0x50
Apr 25 02:52:43 localhost kernel: [124971.402404] [<c1060606>] ? sys_clock_gettime+0x66/0xa0
Apr 25 02:52:43 localhost kernel: [124971.402406] [<c1027530>] ? do_page_fault+0x0/0x430
Apr 25 02:52:43 localhost kernel: [124971.402408] [<c131acfb>] error_code+0x67/0x6c
Apr 25 02:52:43 localhost kernel: [124971.402410] [<c1310000>] ? init_idle+0x159/0x275
Apr 25 02:54:43 localhost kernel: [125091.334966] preload D f3653ed0 0 2325 1 0x00000000
Apr 25 02:54:43 localhost kernel: [125091.334973] f3653ee0 00000086 00000002 f3653ed0 c4056380 f3653f00 c57c2780 00000000
Apr 25 02:54:43 localhost kernel: [125091.334984] c110ed6d 0000416d 00000001 f4185780 f3653e78 f5586380 c14c0380 f3a6f020
Apr 25 02:54:43 localhost kernel: [125091.334987] f3a6f1e4 c114cc60 f3653ed4 c14c0380 f5586380 f3a6f020 f406da90 f585a740
Apr 25 02:54:43 localhost kernel: [125091.334991] Call Trace:
Apr 25 02:54:43 localhost kernel: [125091.334998] [<c110ed6d>] ? do_lookup+0xdd/0x260
Apr 25 02:54:43 localhost kernel: [125091.335003] [<c114cc60>] ? proc_pid_follow_link+0x0/0x40
Apr 25 02:54:43 localhost kernel: [125091.335008] [<c111de95>] ? mntput_no_expire+0x25/0xd0
Apr 25 02:54:43 localhost kernel: [125091.335010] [<c111df53>] ? mntput+0x13/0x20
Apr 25 02:54:43 localhost kernel: [125091.335016] [<c1319b35>] rwsem_down_failed_common+0x95/0xe0
Apr 25 02:54:43 localhost kernel: [125091.335018] [<c1319bb2>] rwsem_down_read_failed+0x12/0x14
Apr 25 02:54:43 localhost kernel: [125091.335021] [<c1319bef>] call_rwsem_down_read_failed+0x7/0xc
Apr 25 02:54:43 localhost kernel: [125091.335023] [<c131938d>] ? down_read+0xd/0x10
Apr 25 02:54:43 localhost kernel: [125091.335025] [<c114e948>] get_mm_exe_file+0x18/0x40
Apr 25 02:54:43 localhost kernel: [125091.335026] [<c114e9ae>] proc_exe_link+0x3e/0x90
Apr 25 02:54:43 localhost kernel: [125091.335029] [<c114cccf>] proc_pid_readlink+0x2f/0xc0
Apr 25 02:54:43 localhost kernel: [125091.335032] [<c1119adc>] ? touch_atime+0x5c/0x140
Apr 25 02:54:43 localhost kernel: [125091.335034] [<c111df53>] ? mntput+0x13/0x20
Apr 25 02:54:43 localhost kernel: [125091.335038] [<c1108ea9>] sys_readlinkat+0x89/0x90
Apr 25 02:54:43 localhost kernel: [125091.335040] [<c1108ed7>] sys_readlink+0x27/0x30
Apr 25 02:54:43 localhost kernel: [125091.335044] [<c10037df>] sysenter_do_call+0x12/0x28
Apr 25 02:54:43 localhost kernel: [125091.335064] chromium D c5a1ff2c 0 26540 6277 0x00000000
Apr 25 02:54:43 localhost kernel: [125091.335067] c5a1ff3c 00200086 00000002 c5a1ff2c c5a1fea8 c110dc05 000080c2 0239fc82
Apr 25 02:54:43 localhost kernel: [125091.335070] c111158e 00000026 00000180 c33fb000 000080c3 f5406380 c14c0380 f3070450
Apr 25 02:54:43 localhost kernel: [125091.335074] f3070614 c11aaa34 c5a1ff60 c14c0380 f5406380 f3070450 c1429f60 b44766d4
Apr 25 02:54:43 localhost kernel: [125091.335077] Call Trace:
Apr 25 02:54:43 localhost kernel: [125091.335081] [<c110dc05>] ? path_put+0x15/0x20
Apr 25 02:54:43 localhost kernel: [125091.335083] [<c111158e>] ? do_filp_open+0x14e/0x6a0
Apr 25 02:54:43 localhost kernel: [125091.335087] [<c11aaa34>] ? copy_to_user+0x34/0x50
Apr 25 02:54:43 localhost kernel: [125091.335089] [<c1319b35>] rwsem_down_failed_common+0x95/0xe0
Apr 25 02:54:43 localhost kernel: [125091.335092] [<c1319b92>] rwsem_down_write_failed+0x12/0x20
Apr 25 02:54:43 localhost kernel: [125091.335094] [<c1319bfa>] call_rwsem_down_write_failed+0x6/0x8
Apr 25 02:54:43 localhost kernel: [125091.335096] [<c13193a5>] ? down_write+0x15/0x17
Apr 25 02:54:43 localhost kernel: [125091.335101] [<c10e11f0>] sys_mmap_pgoff+0xd0/0x1c0
Apr 25 02:54:43 localhost kernel: [125091.335103] [<c10037df>] sysenter_do_call+0x12/0x28
Apr 25 02:54:43 localhost kernel: [125091.335107] [<c1310000>] ? init_idle+0x159/0x275
Apr 25 02:54:43 localhost kernel: [125091.335112] chromium D c4ec1f40 0 26545 6277 0x00000000
Apr 25 02:54:43 localhost kernel: [125091.335114] c4ec1f50 00200086 00000002 c4ec1f40 ec789b04 00000000 00000009 00000000
Apr 25 02:54:43 localhost kernel: [125091.335117] ffffffe8 00000000 00200286 f5407578 29f5c067 f5406380 c14c0380 f30740b0
Apr 25 02:54:43 localhost kernel: [125091.335121] f3074274 c5949600 c10d9f99 c14c0380 f5406380 f30740b0 c1429f60 b0468000
Apr 25 02:54:43 localhost kernel: [125091.335124] Call Trace:
Apr 25 02:54:43 localhost kernel: [125091.335126] [<c10d9f99>] ? __pte_alloc+0xa9/0x100
Apr 25 02:54:43 localhost kernel: [125091.335128] [<c10dd0f9>] ? handle_mm_fault+0x109/0x200
Apr 25 02:54:43 localhost kernel: [125091.335132] [<c1027530>] ? do_page_fault+0x0/0x430
Apr 25 02:54:43 localhost kernel: [125091.335134] [<c10276c3>] ? do_page_fault+0x193/0x430
Apr 25 02:54:43 localhost kernel: [125091.335138] [<c1139663>] ? sys_epoll_wait+0x63/0x310
Apr 25 02:54:43 localhost kernel: [125091.335140] [<c1319b35>] rwsem_down_failed_common+0x95/0xe0
Apr 25 02:54:43 localhost kernel: [125091.335142] [<c1319b92>] rwsem_down_write_failed+0x12/0x20
Apr 25 02:54:43 localhost kernel: [125091.335145] [<c1319bfa>] call_rwsem_down_write_failed+0x6/0x8
Apr 25 02:54:43 localhost kernel: [125091.335147] [<c13193a5>] ? down_write+0x15/0x17
Apr 25 02:54:43 localhost kernel: [125091.335149] [<c10e14cf>] sys_munmap+0x2f/0x60
Apr 25 02:54:43 localhost kernel: [125091.335151] [<c10037df>] sysenter_do_call+0x12/0x28
Apr 25 02:54:43 localhost kernel: [125091.335153] [<c131007b>] ? init_idle+0x1d4/0x275
Apr 25 02:54:43 localhost kernel: [125091.335155] [<c1310000>] ? init_idle+0x159/0x275
Apr 25 02:54:43 localhost kernel: [125091.335159] chromium D ec721ed0 0 26565 6277 0x00000000
Apr 25 02:54:43 localhost kernel: [125091.335162] ec721ee0 00200086 00000002 ec721ed0 ec721e64 ec721e9c ec721f98 00000000
Apr 25 02:54:43 localhost kernel: [125091.335165] 00000001 af6f1d78 00000000 ffffff92 ec721e70 f5586380 c14c0380 f3a6f8c0
Apr 25 02:54:43 localhost kernel: [125091.335168] f3a6fa84 ec721e70 f3a6f8c0 c14c0380 f5586380 f3a6f8c0 f406da90 00000000
Apr 25 02:54:43 localhost kernel: [125091.335172] Call Trace:
Apr 25 02:54:43 localhost kernel: [125091.335176] [<c1072b1d>] ? get_futex_key+0x6d/0x1d0
Apr 25 02:54:43 localhost kernel: [125091.335179] [<c1073185>] ? futex_wake+0xe5/0x100
Apr 25 02:54:43 localhost kernel: [125091.335181] [<c1319b35>] rwsem_down_failed_common+0x95/0xe0
Apr 25 02:54:43 localhost kernel: [125091.335183] [<c1027530>] ? do_page_fault+0x0/0x430
Apr 25 02:54:43 localhost kernel: [125091.335185] [<c1319bb2>] rwsem_down_read_failed+0x12/0x14
Apr 25 02:54:43 localhost kernel: [125091.335187] [<c1319bef>] call_rwsem_down_read_failed+0x7/0xc
Apr 25 02:54:43 localhost kernel: [125091.335189] [<c131938d>] ? down_read+0xd/0x10
Apr 25 02:54:43 localhost kernel: [125091.335191] [<c102768a>] do_page_fault+0x15a/0x430
Apr 25 02:54:43 localhost kernel: [125091.335194] [<c106ae44>] ? ktime_get_ts+0xe4/0x110
Apr 25 02:54:43 localhost kernel: [125091.335196] [<c11aaa34>] ? copy_to_user+0x34/0x50
Apr 25 02:54:43 localhost kernel: [125091.335198] [<c1060606>] ? sys_clock_gettime+0x66/0xa0
Apr 25 02:54:43 localhost kernel: [125091.335200] [<c1027530>] ? do_page_fault+0x0/0x430
Apr 25 02:54:43 localhost kernel: [125091.335203] [<c131acfb>] error_code+0x67/0x6c
Apr 25 02:54:43 localhost kernel: [125091.335205] [<c1310000>] ? init_idle+0x159/0x275
Apr 25 02:56:43 localhost kernel: [125211.267898] preload D f3653ed0 0 2325 1 0x00000000
Apr 25 02:56:43 localhost kernel: [125211.267905] f3653ee0 00000086 00000002 f3653ed0 c4056380 f3653f00 c57c2780 00000000
Apr 25 02:56:43 localhost kernel: [125211.267914] c110ed6d 0000416d 00000001 f4185780 f3653e78 f5586380 c14c0380 f3a6f020
Apr 25 02:56:43 localhost kernel: [125211.267922] f3a6f1e4 c114cc60 f3653ed4 c14c0380 f5586380 f3a6f020 f406da90 f585a740
Apr 25 02:56:43 localhost kernel: [125211.267931] Call Trace:
Apr 25 02:56:43 localhost kernel: [125211.267941] [<c110ed6d>] ? do_lookup+0xdd/0x260
Apr 25 02:56:43 localhost kernel: [125211.267950] [<c114cc60>] ? proc_pid_follow_link+0x0/0x40
Apr 25 02:56:43 localhost kernel: [125211.267957] [<c111de95>] ? mntput_no_expire+0x25/0xd0
Apr 25 02:56:43 localhost kernel: [125211.267962] [<c111df53>] ? mntput+0x13/0x20
Apr 25 02:56:43 localhost kernel: [125211.267971] [<c1319b35>] rwsem_down_failed_common+0x95/0xe0
Apr 25 02:56:43 localhost kernel: [125211.267977] [<c1319bb2>] rwsem_down_read_failed+0x12/0x14
Apr 25 02:56:43 localhost kernel: [125211.267982] [<c1319bef>] call_rwsem_down_read_failed+0x7/0xc
Apr 25 02:56:43 localhost kernel: [125211.267988] [<c131938d>] ? down_read+0xd/0x10
Apr 25 02:56:43 localhost kernel: [125211.267990] [<c114e948>] get_mm_exe_file+0x18/0x40
Apr 25 02:56:43 localhost kernel: [125211.267992] [<c114e9ae>] proc_exe_link+0x3e/0x90
Apr 25 02:56:43 localhost kernel: [125211.267994] [<c114cccf>] proc_pid_readlink+0x2f/0xc0
Apr 25 02:56:43 localhost kernel: [125211.267997] [<c1119adc>] ? touch_atime+0x5c/0x140
Apr 25 02:56:43 localhost kernel: [125211.267999] [<c111df53>] ? mntput+0x13/0x20
Apr 25 02:56:43 localhost kernel: [125211.268003] [<c1108ea9>] sys_readlinkat+0x89/0x90
Apr 25 02:56:43 localhost kernel: [125211.268005] [<c1108ed7>] sys_readlink+0x27/0x30
Apr 25 02:56:43 localhost kernel: [125211.268009] [<c10037df>] sysenter_do_call+0x12/0x28
Any guesses what's going on here?
karol wrote:
It's a known issue and it has been present since forever.
What filesystems, what schedulers, are you using the stock Arch kernel? Does it happen with the -ck kernel?
What command did you use exactly to move your data?
I write into a truecrypt container that's on an NTFS-formatted USB stick and contains an Ext4 file system.
I used two commands, both cause these problems, the first one being even worse than the second one.
truecrypt -t -c <..create encrypted container file..>
dd if=/dev/sda of=/<..truecrypt container mount point> bs=1M
No idea what schedulers, how do I find out?
Stock kernel yes, except I had to patch it with:
CONFIG_HZ_1000=y
CONFIG_HZ=1000
which I needed for my NVidia GPU to prevent it from crashing randomly when Bumblee daemon tries to enable it and enter an unusable state until system gets rebooted.
This goes with kernel parameters:
rcutree.rcu_idle_gp_delay=1 acpi_enforce_resources=lax
I haven't tried that "ck" kernel because I read how people reported that it didn't help them with this problem.
Similar Messages
-
System freezes due to hard disk problems only on Linux (not windows)
Intro/context:
Recently i've bought (about 2 months) a new laptop, a Lenovo G50-70, which came with Windows 8.1. As i had no interest on that OS, i formatted the disk and installed only Arch Linux. During that time i experienced system freezes which i had no idea why they were happening. As time went by, i found disk errors on system logs related to hard drive. I searched those errors and almost everything i found was that my hard drive had problems, so i decided to use my warranty. But first, i installed the original OS back again. And after using it a couple of weeks, i didn't experiencie any problem with my hard drive (on Linux it was really frequent). Now i've installed Arch Linux back, along with original Windows 8.1, having dual boot. There is no disk problem when using Windows, but when on Arch, i have the same errors and problems i used to have. So i assume it may be related to kernel or some confniguration issue.
I also haven't noticed any relation between system freezes and system use. I mean, it can happen either under light or heavy use.
tl dr: system freezes randomly for some minutes when using linux due to hard drive problems. The problem doesn't happen on windows.
What i've done so far:
The first period i was on Arch, i run smart (long and short), fsck, and hdparm tests. And nothing (no errors). Searched for bad blocks, and nothing. When back on windows, i also run tests on hdd and found no problems, except some sector reallocation not-that-nice indicators. These problems occured at the end of the first arch installation period. But still i currently experience no problem on windows.
I've also tried setting libata: noncq, 3.0G, noacpi, noapic kernel parameters, and had no result.
Changed BIOS setting from AHCI to Legacy, and no result. Also updated BIOS and no result.
I found no firmware update for this hard drive.
So i don't know what other thing i can try. I want to emphasize that there is no problem, no freezing, when running Windows, so i don't think it's a hard drive issue.
Info:
Hard drive is a Toshiba 2.5" HDD MQ01ABD100 5400 rpm.
Some logs i've recollected all this time:
journalctl -xfa --system
abr 21 13:51:13 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 13:51:24 echoes kernel: ata1.00: failed command: CHECK POWER MODE
abr 21 13:51:24 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 7
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 13:51:24 echoes kernel: ata1.00: status: { DRDY }
abr 21 13:51:24 echoes kernel: ata1: hard resetting link
abr 21 13:51:24 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 13:51:24 echoes kernel: ata1.00: configured for UDMA/100
abr 21 13:51:24 echoes kernel: ata1: EH complete
abr 21 14:01:40 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 23 pio 512 in
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 22 pio 512 in
res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 18
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:01:51 echoes udisksd[627]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/TOSHIBA_MQ01ABD100_Y44MT611T: Error updating SMART data: sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
dmesg
[55661.023028] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6 frozen
[55661.023034] ata1.00: failed command: READ FPDMA QUEUED
[55661.023040] ata1.00: cmd 60/08:78:18:08:c0/00:00:4b:00:00/40 tag 15 ncq 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[55661.023042] ata1.00: status: { DRDY }
[55661.023046] ata1: hard resetting link
[55666.358537] ata1: link is slow to respond, please be patient (ready=0)
[55671.053813] ata1: COMRESET failed (errno=-16)
[55671.053819] ata1: hard resetting link
[55676.389438] ata1: link is slow to respond, please be patient (ready=0)
[55678.897149] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[55681.320305] ata1.00: configured for UDMA/100
[55681.320319] ata1.00: device reported invalid CHS sector 0
[55681.320349] ata1: EH complete
[55729.969443] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
[55729.969588] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
dmesg
[102884.889930] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
[102884.890305] systemd[1]: Unit systemd-journald.service entered failed state.
[102884.890333] systemd[1]: systemd-journald.service failed.
[102885.560745] systemd-coredump[28916]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.5bf9a012fed048ce8975998cf3c3c20e.6705.1427990901000000.
[102885.860957] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[102921.797810] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[104179.117363] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[104179.117369] ata1.00: failed command: READ FPDMA QUEUED
[104179.117375] ata1.00: cmd 60/08:00:48:88:8b/00:00:4d:00:00/40 tag 0 ncq 4096 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[104179.117377] ata1.00: status: { DRDY }
[104179.117381] ata1: hard resetting link
[104184.453382] ata1: link is slow to respond, please be patient (ready=0)
[104189.149114] ata1: COMRESET failed (errno=-16)
[104189.149121] ata1: hard resetting link
[104189.469276] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[104189.952982] ata1.00: configured for UDMA/100
[104189.952989] ata1.00: device reported invalid CHS sector 0
[104189.953004] ata1: EH complete
[104508.223792] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[104508.223798] ata1.00: failed command: SMART
[104508.223803] ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 2
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[104508.223806] ata1.00: status: { DRDY }
[104508.223810] ata1: hard resetting link
[104509.984601] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[104510.698126] ata1.00: configured for UDMA/100
[104510.698157] ata1: EH complete
One of the latest and worse
journalctl -xfa --system
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:00:e0:d6:75/00:00:00:00:00/40 tag 0 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:08:08:d8:75/00:00:00:00:00/40 tag 1 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:10:30:d9:75/00:00:00:00:00/40 tag 2 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:18:58:da:75/00:00:00:00:00/40 tag 3 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:20:e8:e5:75/00:00:00:00:00/40 tag 4 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:28:80:db:75/00:00:00:00:00/40 tag 5 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:30:68:dd:75/00:00:00:00:00/40 tag 6 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:38:90:de:75/00:00:00:00:00/40 tag 7 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:40:b8:df:75/00:00:00:00:00/40 tag 8 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:48:90:e1:75/00:00:00:00:00/40 tag 9 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:50:98:e3:75/00:00:00:00:00/40 tag 10 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:58:c0:e4:75/00:00:00:00:00/40 tag 11 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/c8:78:28:b9:2a/0b:00:4e:00:00/40 tag 15 ncq 1544192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:80:b0:4b:c0/00:00:4f:00:00/40 tag 16 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:88:90:4b:80/00:00:50:00:00/40 tag 17 ncq 8192 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:90:98:22:81/00:00:50:00:00/40 tag 18 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:98:00:0e:00/00:00:5f:00:00/40 tag 19 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a0:00:08:80/00:00:5f:00:00/40 tag 20 ncq 4096 out
res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a8:80:08:80/00:00:5f:00:00/40 tag 21 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:b0:08:0b:81/00:00:5f:00:00/40 tag 22 ncq 8192 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:b8:70:c8:75/00:00:00:00:00/40 tag 23 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c0:20:c9:75/00:00:00:00:00/40 tag 24 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c8:88:c9:75/00:00:00:00:00/40 tag 25 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d0:58:ca:75/00:00:00:00:00/40 tag 26 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d8:a0:ce:75/00:00:00:00:00/40 tag 27 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e0:68:d3:75/00:00:00:00:00/40 tag 28 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e8:90:d4:75/00:00:00:00:00/40 tag 29 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:f0:b8:d5:75/00:00:00:00:00/40 tag 30 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 12 88 d7 c0 00 04 d0 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 310958016
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 36311758 (offset 8388608 size 2695168 starting block 38869906)
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995128
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995129
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995130
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995131
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995132
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995133
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995134
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995135
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995136
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995137
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4b dd 39 88 00 01 78 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1272789384
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 34999445 (offset 0 size 192512 starting block 159098720)
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4e 2a b3 e8 00 05 40 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1311421416
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 35001016 (offset 0 size 2232320 starting block 163927845)
abr 22 12:57:11 echoes kernel: ata1: EH complete
abr 22 12:57:11 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 22 12:57:11 echoes kernel: ata1.00: failed command: CHECK POWER MODE
abr 22 12:57:11 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 25
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
abr 22 12:57:11 echoes kernel: ata1: EH complete
Current smart status:
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.1-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
Serial Number: Y44MT611T
LU WWN Device Id: 5 000039 5e1a80e85
Firmware Version: AX1P5E
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun May 3 16:42:06 2015 ART
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 234) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1671
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 306
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 152
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 699
10 Spin_Retry_Count 0x0033 106 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 300
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 216
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 14140
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 34 (Min/Max 16/44)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 19
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 099 099 000 Old_age Always - 515
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 190
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0x50) Completed without error 00% 611 -
# 2 Short offline Completed without error 00% 611 -
# 3 Short offline Completed without error 00% 597 -
# 4 Vendor (0x50) Completed without error 00% 583 -
# 5 Short offline Completed without error 00% 583 -
# 6 Vendor (0x50) Completed without error 00% 575 -
# 7 Short offline Completed without error 00% 575 -
# 8 Short offline Completed without error 00% 547 -
# 9 Extended offline Completed without error 00% 529 -
#10 Short offline Completed without error 00% 355 -
#11 Short offline Completed without error 00% 355 -
#12 Extended offline Aborted by host 70% 355 -
#13 Short offline Completed without error 00% 319 -
#14 Vendor (0x50) Completed without error 00% 13 -
#15 Short offline Completed without error 00% 13 -
#16 Short offline Completed without error 00% 12 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kernels used have been from 3.9 to current: Linux echoes 4.0.1-1-ARCH #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 x86_64 GNU/Linux
Last edited by jesu (2015-05-03 19:42:53)Something i'd noticed both the first time i was on arch and now i've reinstalled it, was that at first i didn't have this problem. I mean, when Arch was just installed. While i was installing and setting up everything.
Now, i'm not 100% sure about this, but i think problems began when using my current user. Disk is partitioned the following way:
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 1000M 0 part
├─sda2 8:2 0 260M 0 part /boot
├─sda3 8:3 0 207,7G 0 part
├─sda4 8:4 0 25G 0 part
├─sda5 8:5 0 14,8G 0 part
├─sda6 8:6 0 80,5G 0 part /
├─sda8 8:8 0 599G 0 part /home
└─sda9 8:9 0 2G 0 part [SWAP]
So, i believe problems, for some reason, are related (and were related), both before and now, to the /home partition, /dev/sda8 in this ocassion.
Because of this, i booted into systemd rescue mode, like root, rw, and unmounted /home partition. Despite root-only limitations, i used the system for a couple of hours, started lxqt, browsed the web mainly, and experienced no problem at all.
Now i booted normally, with my regular user, and these problems are experienced just like before (and almost instantly, like 3 or 5 minutes after starting system use).
dmesg this time showed a some different log, though it's not the first time i see this. I just didn't saved that kind of log before.
[ 653.821719] ata1.00: exception Emask 0x0 SAct 0x100 SErr 0x0 action 0x6 frozen
[ 653.821726] ata1.00: failed command: READ FPDMA QUEUED
[ 653.821732] ata1.00: cmd 60/08:40:60:25:43/00:00:1b:00:00/40 tag 8 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 653.821735] ata1.00: status: { DRDY }
[ 653.821739] ata1: hard resetting link
[ 659.156760] ata1: link is slow to respond, please be patient (ready=0)
[ 663.851604] ata1: COMRESET failed (errno=-16)
[ 663.851610] ata1: hard resetting link
[ 669.186591] ata1: link is slow to respond, please be patient (ready=0)
[ 673.881456] ata1: COMRESET failed (errno=-16)
[ 673.881462] ata1: hard resetting link
[ 679.216481] ata1: link is slow to respond, please be patient (ready=0)
[ 702.743982] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 703.012578] ata1.00: configured for UDMA/100
[ 703.012584] ata1.00: device reported invalid CHS sector 0
[ 703.012599] ata1: EH complete
[ 714.097642] systemd[1]: systemd-journald.service watchdog timeout (limit 1min)!
[ 742.443488] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443494] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x2a 2a 00 28 c3 c6 40 00 00 10 00
[ 742.443497] blk_update_request: I/O error, dev sda, sector 683918912
[ 742.443503] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489866)
[ 742.443506] Buffer I/O error on device sda8, logical block 9323208
[ 742.443508] Buffer I/O error on device sda8, logical block 9323209
[ 742.443515] sd 0:0:0:0: [sda] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443518] sd 0:0:0:0: [sda] tag#19 CDB: opcode=0x2a 2a 00 28 c3 c6 80 00 00 10 00
[ 742.443520] blk_update_request: I/O error, dev sda, sector 683918976
[ 742.443522] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489874)
[ 742.443524] Buffer I/O error on device sda8, logical block 9323216
[ 742.443526] Buffer I/O error on device sda8, logical block 9323217
[ 742.443531] sd 0:0:0:0: [sda] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443534] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 28 c3 c6 d0 00 00 10 00
[ 742.443536] blk_update_request: I/O error, dev sda, sector 683919056
[ 742.443538] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489884)
[ 742.443540] Buffer I/O error on device sda8, logical block 9323226
[ 742.443542] Buffer I/O error on device sda8, logical block 9323227
[ 742.443547] sd 0:0:0:0: [sda] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443549] sd 0:0:0:0: [sda] tag#21 CDB: opcode=0x2a 2a 00 28 c3 c7 10 00 00 10 00
[ 742.443551] blk_update_request: I/O error, dev sda, sector 683919120
[ 742.443553] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489892)
[ 742.443555] Buffer I/O error on device sda8, logical block 9323234
[ 742.443557] Buffer I/O error on device sda8, logical block 9323235
[ 756.187685] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
[ 756.187986] systemd[1]: Unit systemd-journald.service entered failed state.
[ 756.188116] systemd[1]: systemd-journald.service failed.
[ 756.188474] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
[ 756.189106] systemd[1]: Stopping Flush Journal to Persistent Storage...
[ 756.189143] systemd[1]: Listening on Journal Audit Socket.
[ 756.189801] systemd[1]: Starting Journal Service...
[ 757.525493] systemd-coredump[1038]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.b8610e85f9074a418534aaee0adbac56.141.1430763073000000.lz4.
[ 758.133944] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 758.503041] systemd[1]: Started Journal Service.
[ 759.180771] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 974.867721] ata1.00: exception Emask 0x0 SAct 0x3f80 SErr 0x0 action 0x6 frozen
[ 974.867732] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867742] ata1.00: cmd 61/08:38:68:d3:c5/00:00:1a:00:00/40 tag 7 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867747] ata1.00: status: { DRDY }
[ 974.867751] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867759] ata1.00: cmd 61/08:40:88:d3:c5/00:00:1a:00:00/40 tag 8 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867763] ata1.00: status: { DRDY }
[ 974.867767] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867774] ata1.00: cmd 61/08:48:a0:d3:c5/00:00:1a:00:00/40 tag 9 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867778] ata1.00: status: { DRDY }
[ 974.867781] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867789] ata1.00: cmd 61/20:50:c0:d3:c5/00:00:1a:00:00/40 tag 10 ncq 16384 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867793] ata1.00: status: { DRDY }
[ 974.867796] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867803] ata1.00: cmd 61/10:58:f0:d3:c5/00:00:1a:00:00/40 tag 11 ncq 8192 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867807] ata1.00: status: { DRDY }
[ 974.867810] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867817] ata1.00: cmd 61/08:60:10:d4:c5/00:00:1a:00:00/40 tag 12 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867821] ata1.00: status: { DRDY }
[ 974.867824] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867831] ata1.00: cmd 61/18:68:28:d4:c5/00:00:1a:00:00/40 tag 13 ncq 12288 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867835] ata1.00: status: { DRDY }
[ 974.867841] ata1: hard resetting link
[ 980.202774] ata1: link is slow to respond, please be patient (ready=0)
[ 984.900902] ata1: COMRESET failed (errno=-16)
[ 984.900908] ata1: hard resetting link
[ 990.236024] ata1: link is slow to respond, please be patient (ready=0)
[ 994.930829] ata1: COMRESET failed (errno=-16)
[ 994.930836] ata1: hard resetting link
[ 996.798104] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 997.014012] ata1.00: configured for UDMA/100
[ 997.014020] ata1.00: device reported invalid CHS sector 0
[ 997.014023] ata1.00: device reported invalid CHS sector 0
[ 997.014025] ata1.00: device reported invalid CHS sector 0
[ 997.014026] ata1.00: device reported invalid CHS sector 0
[ 997.014028] ata1.00: device reported invalid CHS sector 0
[ 997.014030] ata1.00: device reported invalid CHS sector 0
[ 997.014031] ata1.00: device reported invalid CHS sector 0
[ 997.014065] ata1: EH complete
There are some sda8 (home) related messages. I also found these messages first time Arch was installed (i think also related to home partition).
root and home partitions are both ext4. -
Hi all.
I would first like to say thank you in advance to anyone who takes the time to look at this.
I am new to archlinux and semi new to linux in general. I have installed arch on my desktop and it runs fine for what seems like a random amount of time. Xfce just freezes and I can not do anything to make the system responsive. control-alt-backspace, SysRq keys, virtual console switching, etc. Nothing seems to work. I can not even SSH into the box from another machine once it has locked up.
Any help anyone can give me would be greatly greatly appreciated.
I have attached some of my logs below along with lsmod, lspci dmesg output in case that helps.
EDIT:
I have edited my post and put my output between code tags. Sorry about that. New to the forums and I was not sure what the proper etiquette was. Posting my logs and command output as raw text felt wrong but I was not sure what the alternative was. I see now that with a bit of research I should have been able to find the correct way to post that stuff. I apologise for littering up the forum.
lspci output:
00:00.0 Memory controller: NVIDIA Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: NVIDIA Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: NVIDIA Corporation CK804 SMBus (rev a2)
00:02.0 USB controller: NVIDIA Corporation CK804 USB Controller (rev a2)
00:02.1 USB controller: NVIDIA Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: NVIDIA Corporation CK804 AC'97 Audio Controller (rev a2)
00:06.0 IDE interface: NVIDIA Corporation CK804 IDE (rev a2)
00:07.0 IDE interface: NVIDIA Corporation CK804 Serial ATA Controller (rev a3)
00:08.0 IDE interface: NVIDIA Corporation CK804 Serial ATA Controller (rev a3)
00:09.0 PCI bridge: NVIDIA Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: NVIDIA Corporation CK804 Ethernet Controller (rev a3)
00:0b.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: NVIDIA Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: NVIDIA Corporation NV45 [GeForce 6800 GTO] (rev a2)
05:07.0 Network controller: Broadcom Corporation BCM4306 802.11bg Wireless Network Controller (rev 02)
05:0a.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]
05:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
lsmod output:
Module Size Used by
aes_i586 6940 2
cryptd 7023 0
aes_generic 26054 1 aes_i586
nvidia 10925239 40
arc4 1118 2
b43legacy 94382 0
mac80211 336883 1 b43legacy
cfg80211 153196 2 mac80211,b43legacy
rfkill 12600 1 cfg80211
ssb 41732 1 b43legacy
snd_intel8x0 22672 2
snd_cs4236 22144 0
pcmcia 31438 1 ssb
snd_mpu401 3568 0
snd_wavefront 28274 0
mmc_core 73191 1 ssb
snd_ac97_codec 89900 1 snd_intel8x0
snd_wss_lib 18115 2 snd_wavefront,snd_cs4236
agpgart 22159 1 nvidia
i2c_nforce2 4456 0
forcedeth 50249 0
snd_mpu401_uart 4943 3 snd_wavefront,snd_mpu401,snd_cs4236
floppy 49063 0
pcmcia_core 10241 1 pcmcia
i2c_core 16845 2 i2c_nforce2,nvidia
ac97_bus 874 1 snd_ac97_codec
snd_rawmidi 15014 2 snd_mpu401_uart,snd_wavefront
skge 34779 0
evdev 7310 6
snd_pcm 60499 4 snd_wss_lib,snd_ac97_codec,snd_cs4236,snd_intel8x0
snd_opl3_lib 7218 2 snd_wavefront,snd_cs4236
snd_page_alloc 5901 3 snd_pcm,snd_wss_lib,snd_intel8x0
snd_hwdep 4970 2 snd_opl3_lib,snd_wavefront
snd_seq_device 4316 2 snd_opl3_lib,snd_rawmidi
snd_timer 15158 3 snd_opl3_lib,snd_pcm,snd_wss_lib
firewire_ohci 27283 0
snd 45013 17 snd_timer,snd_seq_device,snd_hwdep,snd_opl3_lib,snd_pcm,snd_rawmidi,snd_mpu401_uart,snd_wss_lib,snd_ac97_codec,snd_wavefront,snd_mpu401,snd_cs4236,snd_intel8x0
firewire_core 44257 1 firewire_ohci
soundcore 4986 1 snd
ppdev 4750 0
serio_raw 3709 0
pcspkr 1423 0
parport_pc 26601 0
parport 26479 2 parport_pc,ppdev
k8temp 2583 0
ns558 1831 0
processor 23476 0
fan 1902 0
gameport 6680 2 ns558
joydev 7663 0
asus_atk0110 8888 0
crc_itu_t 1095 1 firewire_core
button 3614 0
thermal 6563 0
ext4 384668 3
crc16 1091 1 ext4
jbd2 60590 1 ext4
mbcache 4345 1 ext4
hid_logitech 14128 0
ff_memless 3806 1 hid_logitech
sr_mod 13148 0
cdrom 30504 1 sr_mod
usbhid 31477 1 hid_logitech
hid 66633 2 usbhid,hid_logitech
sd_mod 25867 5
pata_acpi 2388 0
sata_sil 6200 4
pata_amd 8155 0
ata_generic 2391 0
sata_nv 17444 0
ohci_hcd 19120 0
ehci_hcd 38640 0
libata 145743 5 sata_nv,ata_generic,pata_amd,sata_sil,pata_acpi
scsi_mod 112765 3 libata,sd_mod,sr_mod
usbcore 122751 4 ehci_hcd,ohci_hcd,usbhid
usb_common 622 1 usbcore
dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 8 05:10:33 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: Magnell System name/A8N-SLI DELUXE, BIOS ASUS A8N-SLI DELUXE ACPI BIOS Revision 1002 11/26/2004
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f5ad0] f5ad0
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[ 0.000000] RAMDISK: 3fd18000 - 3ffe0000
[ 0.000000] Allocated new RAMDISK: 37536000 - 377fd47f
[ 0.000000] Move RAMDISK from 000000003fd18000 - 000000003ffdf47e to 37536000 - 377fd47e
[ 0.000000] ACPI: RSDP 000f7cc0 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 3fff3000 00030 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 3fff30c0 062CE (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3fff0000 00040
[ 0.000000] ACPI: MCFG 3fff9440 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 3fff93c0 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262014
[ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f6d35200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34530 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6800000 s30848 r0 d22400 u4194304
[ 0.000000] pcpu-alloc: s30848 r0 d22400 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259966
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/0f476df3-b4ef-47c6-910c-e31b7d180cfc ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2096896 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[ 0.000000] Memory: 1027408k/1048512k available (3774k kernel code, 20648k reserved, 1434k data, 520k init, 139208k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
[ 0.000000] .data : 0xc04af8a9 - 0xc0616400 (1434 kB)
[ 0.000000] .text : 0xc0100000 - 0xc04af8a9 (3774 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2211.336 MHz processor.
[ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 4424.95 BogoMIPS (lpj=7371120)
[ 0.006674] pid_max: default: 32768 minimum: 301
[ 0.006704] Security Framework initialized
[ 0.006709] AppArmor: AppArmor disabled by boot time parameter
[ 0.006734] Mount-cache hash table entries: 512
[ 0.006880] Initializing cgroup subsys cpuacct
[ 0.006883] Initializing cgroup subsys memory
[ 0.006893] Initializing cgroup subsys devices
[ 0.006897] Initializing cgroup subsys freezer
[ 0.006900] Initializing cgroup subsys net_cls
[ 0.006903] Initializing cgroup subsys blkio
[ 0.006929] mce: CPU supports 5 MCE banks
[ 0.007008] SMP alternatives: switching to UP code
[ 0.013215] Freeing SMP alternatives: 16k freed
[ 0.013228] ACPI: Core revision 20120111
[ 0.018138] ftrace: allocating 16619 entries in 33 pages
[ 0.023395] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023703] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.057240] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 00
[ 0.059996] Performance Events: AMD PMU driver.
[ 0.059996] ... version: 0
[ 0.059996] ... bit width: 48
[ 0.059996] ... generic registers: 4
[ 0.059996] ... value mask: 0000ffffffffffff
[ 0.059996] ... max period: 00007fffffffffff
[ 0.059996] ... fixed-purpose events: 0
[ 0.059996] ... event mask: 000000000000000f
[ 0.076766] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.083331] Brought up 1 CPUs
[ 0.083334] Total of 1 processors activated (4424.95 BogoMIPS).
[ 0.083805] devtmpfs: initialized
[ 0.083951] PM: Registering ACPI NVS region at 3fff0000 (12288 bytes)
[ 0.084999] NET: Registered protocol family 16
[ 0.085101] node 0 link 0: io port [1000, fffff]
[ 0.085104] TOM: 0000000040000000 aka 1024M
[ 0.085107] node 0 link 0: mmio [e0000000, ef00ffff]
[ 0.085111] node 0 link 0: mmio [a0000, bffff]
[ 0.085114] node 0 link 0: mmio [40000000, fed3ffff]
[ 0.085116] TOM2: 0000000000000000 aka 0M
[ 0.085119] bus: [00, ff] on node 0 link 0
[ 0.085121] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.085124] bus: 00 index 1 [mem 0x40000000-0xffffffff]
[ 0.085126] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.085153] ACPI: bus type pci registered
[ 0.085216] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.085220] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.085222] PCI: Using MMCONFIG for extended config space
[ 0.085224] PCI: Using configuration type 1 for base access
[ 0.085812] bio: create slab <bio-0> at 0
[ 0.085870] ACPI: Added _OSI(Module Device)
[ 0.085873] ACPI: Added _OSI(Processor Device)
[ 0.085875] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.085877] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.086779] ACPI: EC: Look up EC in DSDT
[ 0.087811] ACPI: Actual Package length (5) is larger than NumElements field (4), truncated
[ 0.087815]
[ 0.090599] ACPI: Interpreter enabled
[ 0.090605] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.090625] ACPI: Using IOAPIC for interrupt routing
[ 0.095876] ACPI: No dock devices found.
[ 0.095882] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.095930] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.095989] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.095992] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.095995] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.095998] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.096001] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[ 0.096004] PCI: root bus 00: hardware-probed resources
[ 0.096044] PCI host bridge to bus 0000:00
[ 0.096047] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.096050] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff]
[ 0.096053] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.096066] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
[ 0.096132] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601
[ 0.096151] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.096162] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
[ 0.096170] pci 0000:00:01.1: reg 10: [io 0xe400-0xe41f]
[ 0.096181] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f]
[ 0.096186] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f]
[ 0.096200] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.096215] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
[ 0.096223] pci 0000:00:02.0: reg 10: [mem 0xd5004000-0xd5004fff]
[ 0.096247] pci 0000:00:02.0: supports D1 D2
[ 0.096249] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.096261] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
[ 0.096269] pci 0000:00:02.1: reg 10: [mem 0xd5005000-0xd50050ff]
[ 0.096299] pci 0000:00:02.1: supports D1 D2
[ 0.096301] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.096319] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
[ 0.096326] pci 0000:00:04.0: reg 10: [io 0xdc00-0xdcff]
[ 0.096331] pci 0000:00:04.0: reg 14: [io 0xe000-0xe0ff]
[ 0.096336] pci 0000:00:04.0: reg 18: [mem 0xd5003000-0xd5003fff]
[ 0.096357] pci 0000:00:04.0: supports D1 D2
[ 0.096367] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
[ 0.096383] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
[ 0.096406] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
[ 0.096413] pci 0000:00:07.0: reg 10: [io 0x09f0-0x09f7]
[ 0.096418] pci 0000:00:07.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.096423] pci 0000:00:07.0: reg 18: [io 0x0970-0x0977]
[ 0.096427] pci 0000:00:07.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.096432] pci 0000:00:07.0: reg 20: [io 0xd800-0xd80f]
[ 0.096437] pci 0000:00:07.0: reg 24: [mem 0xd5002000-0xd5002fff]
[ 0.096457] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
[ 0.096464] pci 0000:00:08.0: reg 10: [io 0x09e0-0x09e7]
[ 0.096469] pci 0000:00:08.0: reg 14: [io 0x0be0-0x0be3]
[ 0.096474] pci 0000:00:08.0: reg 18: [io 0x0960-0x0967]
[ 0.096479] pci 0000:00:08.0: reg 1c: [io 0x0b60-0x0b63]
[ 0.096484] pci 0000:00:08.0: reg 20: [io 0xc400-0xc40f]
[ 0.096489] pci 0000:00:08.0: reg 24: [mem 0xd5001000-0xd5001fff]
[ 0.096508] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
[ 0.096525] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
[ 0.096533] pci 0000:00:0a.0: reg 10: [mem 0xd5000000-0xd5000fff]
[ 0.096538] pci 0000:00:0a.0: reg 14: [io 0xb000-0xb007]
[ 0.096561] pci 0000:00:0a.0: supports D1 D2
[ 0.096563] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.096575] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604
[ 0.096603] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.096617] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604
[ 0.096643] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.096658] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
[ 0.096688] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.096702] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
[ 0.096727] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.096744] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.096764] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.096780] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.096795] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.096829] pci 0000:05:07.0: [14e4:4325] type 0 class 0x000280
[ 0.096838] pci 0000:05:07.0: reg 10: [mem 0xd4008000-0xd4009fff]
[ 0.096879] pci 0000:05:0a.0: [1095:3114] type 0 class 0x000104
[ 0.096890] pci 0000:05:0a.0: reg 10: [io 0x9000-0x9007]
[ 0.096897] pci 0000:05:0a.0: reg 14: [io 0x9400-0x9403]
[ 0.096904] pci 0000:05:0a.0: reg 18: [io 0x9800-0x9807]
[ 0.096911] pci 0000:05:0a.0: reg 1c: [io 0x9c00-0x9c03]
[ 0.096918] pci 0000:05:0a.0: reg 20: [io 0xa000-0xa00f]
[ 0.096924] pci 0000:05:0a.0: reg 24: [mem 0xd400a000-0xd400a3ff]
[ 0.096932] pci 0000:05:0a.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.096948] pci 0000:05:0a.0: supports D1 D2
[ 0.096962] pci 0000:05:0b.0: [104c:8023] type 0 class 0x000c00
[ 0.096973] pci 0000:05:0b.0: reg 10: [mem 0xd400b000-0xd400b7ff]
[ 0.096981] pci 0000:05:0b.0: reg 14: [mem 0xd4000000-0xd4003fff]
[ 0.097022] pci 0000:05:0b.0: supports D1 D2
[ 0.097024] pci 0000:05:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.097040] pci 0000:05:0c.0: [11ab:4320] type 0 class 0x000200
[ 0.097052] pci 0000:05:0c.0: reg 10: [mem 0xd4004000-0xd4007fff]
[ 0.097059] pci 0000:05:0c.0: reg 14: [io 0xa400-0xa4ff]
[ 0.097084] pci 0000:05:0c.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.097107] pci 0000:05:0c.0: supports D1 D2
[ 0.097109] pci 0000:05:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.097130] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.097134] pci 0000:00:09.0: bridge window [io 0x9000-0xafff]
[ 0.097137] pci 0000:00:09.0: bridge window [mem 0xd3000000-0xd4ffffff]
[ 0.097141] pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.097144] pci 0000:00:09.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
[ 0.097147] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.097166] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[ 0.097188] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.097210] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[ 0.097240] pci 0000:01:00.0: [10de:00f9] type 0 class 0x000300
[ 0.097251] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd0ffffff]
[ 0.097260] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff pref]
[ 0.097269] pci 0000:01:00.0: reg 18: [mem 0xd1000000-0xd1ffffff]
[ 0.097295] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.097328] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.097335] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[ 0.097340] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd2ffffff]
[ 0.097344] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.097353] pci_bus 0000:00: on NUMA node 0
[ 0.097356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.097491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.097660] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.097663] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.097665] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.127307] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.127351] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.127398] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.127442] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.127483] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.127524] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.127566] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.127609] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.127654] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.127696] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.127738] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.127780] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.127821] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.127869] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.127920] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.127969] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.128000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 0.128028] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[ 0.128055] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[ 0.128082] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[ 0.128108] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.128165] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.128221] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.128278] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.128333] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.128389] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.128444] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.128500] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.128559] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.128619] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.128680] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.128739] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.128845] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.128848] vgaarb: loaded
[ 0.128850] vgaarb: bridge control possible 0000:01:00.0
[ 0.128906] PCI: Using ACPI for IRQ routing
[ 0.133715] PCI: pci_cache_line_size set to 64 bytes
[ 0.133765] reserve RAM buffer: 000000000009e400 - 000000000009ffff
[ 0.133768] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
[ 0.133884] NetLabel: Initializing
[ 0.133886] NetLabel: domain hash size = 128
[ 0.133887] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.133902] NetLabel: unlabeled traffic allowed by default
[ 0.140087] pnp: PnP ACPI init
[ 0.140107] ACPI: bus type pnp registered
[ 0.140135] pnp 00:00: [io 0x4000-0x407f]
[ 0.140137] pnp 00:00: [io 0x4080-0x40ff]
[ 0.140139] pnp 00:00: [io 0x4400-0x447f]
[ 0.140142] pnp 00:00: [io 0x4480-0x44ff]
[ 0.140144] pnp 00:00: [io 0x4800-0x487f]
[ 0.140146] pnp 00:00: [io 0x4880-0x48ff]
[ 0.140205] system 00:00: [io 0x4000-0x407f] has been reserved
[ 0.140208] system 00:00: [io 0x4080-0x40ff] has been reserved
[ 0.140211] system 00:00: [io 0x4400-0x447f] has been reserved
[ 0.140214] system 00:00: [io 0x4480-0x44ff] has been reserved
[ 0.140217] system 00:00: [io 0x4800-0x487f] has been reserved
[ 0.140220] system 00:00: [io 0x4880-0x48ff] has been reserved
[ 0.140224] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.140304] pnp 00:01: [bus 00-ff]
[ 0.140307] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.140309] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.140312] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.140315] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.140317] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[ 0.140320] pnp 00:01: [mem 0x40000000-0xfebfffff window]
[ 0.140371] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.140823] pnp 00:02: [io 0x0010-0x001f]
[ 0.140826] pnp 00:02: [io 0x0022-0x003f]
[ 0.140828] pnp 00:02: [io 0x0044-0x005f]
[ 0.140830] pnp 00:02: [io 0x0062-0x0063]
[ 0.140832] pnp 00:02: [io 0x0065-0x006f]
[ 0.140834] pnp 00:02: [io 0x0074-0x007f]
[ 0.140836] pnp 00:02: [io 0x0091-0x0093]
[ 0.140838] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.140841] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.140843] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.140845] pnp 00:02: [io 0x0800-0x0805]
[ 0.140847] pnp 00:02: [io 0x0290-0x0297]
[ 0.140906] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.140909] system 00:02: [io 0x0800-0x0805] has been reserved
[ 0.140912] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.140915] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.140927] pnp 00:03: [dma 4]
[ 0.140929] pnp 00:03: [io 0x0000-0x000f]
[ 0.140932] pnp 00:03: [io 0x0080-0x0090]
[ 0.140934] pnp 00:03: [io 0x0094-0x009f]
[ 0.140936] pnp 00:03: [io 0x00c0-0x00df]
[ 0.140974] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.140985] pnp 00:04: [io 0x0070-0x0073]
[ 0.140995] pnp 00:04: [irq 8]
[ 0.141031] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.141041] pnp 00:05: [io 0x0061]
[ 0.141076] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.141085] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.141090] pnp 00:06: [irq 13]
[ 0.141129] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.141262] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.141265] pnp 00:07: [io 0x03f7]
[ 0.141269] pnp 00:07: [irq 6]
[ 0.141271] pnp 00:07: [dma 2]
[ 0.141320] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.141497] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.141502] pnp 00:08: [irq 4]
[ 0.141574] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.141956] pnp 00:09: [io 0x0378-0x037f]
[ 0.141958] pnp 00:09: [io 0x0778-0x077b]
[ 0.141963] pnp 00:09: [irq 7]
[ 0.141965] pnp 00:09: [dma 3]
[ 0.142032] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.142245] pnp 00:0a: [io 0x0330-0x0331]
[ 0.142249] pnp 00:0a: [irq 10]
[ 0.142302] pnp 00:0a: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.142465] pnp 00:0b: [io 0x0201]
[ 0.142513] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.142530] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.142585] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.142588] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.142682] pnp 00:0d: [mem 0x000d9000-0x000dbfff]
[ 0.142684] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
[ 0.142687] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[ 0.142689] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[ 0.142691] pnp 00:0d: [mem 0x3fff0000-0x3fffffff]
[ 0.142694] pnp 00:0d: [mem 0xffff0000-0xffffffff]
[ 0.142696] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.142698] pnp 00:0d: [mem 0x00100000-0x3ffeffff]
[ 0.142701] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.142703] pnp 00:0d: [mem 0xfee00000-0xfeefffff]
[ 0.142705] pnp 00:0d: [mem 0xfefff000-0xfeffffff]
[ 0.142707] pnp 00:0d: [mem 0xfff80000-0xfff80fff]
[ 0.142710] pnp 00:0d: [mem 0xfff90000-0xfffbffff]
[ 0.142712] pnp 00:0d: [mem 0xfffed000-0xfffeffff]
[ 0.142780] system 00:0d: [mem 0x000d9000-0x000dbfff] has been reserved
[ 0.142783] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.142786] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.142789] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.142792] system 00:0d: [mem 0x3fff0000-0x3fffffff] could not be reserved
[ 0.142796] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.142799] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.142802] system 00:0d: [mem 0x00100000-0x3ffeffff] could not be reserved
[ 0.142805] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.142808] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.142812] system 00:0d: [mem 0xfefff000-0xfeffffff] could not be reserved
[ 0.142815] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.142818] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.142821] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.142825] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.142834] pnp: PnP ACPI: found 14 devices
[ 0.142836] ACPI: ACPI bus type pnp unregistered
[ 0.179268] Switching to clocksource acpi_pm
[ 0.179290] PCI: max bus depth: 1 pci_try_num: 2
[ 0.179311] pci 0000:00:09.0: BAR 15: assigned [mem 0x40000000-0x400fffff pref]
[ 0.179316] pci 0000:05:0a.0: BAR 6: assigned [mem 0x40000000-0x4007ffff pref]
[ 0.179319] pci 0000:05:0c.0: BAR 6: assigned [mem 0x40080000-0x4009ffff pref]
[ 0.179323] pci 0000:00:09.0: PCI bridge to [bus 05-05]
[ 0.179326] pci 0000:00:09.0: bridge window [io 0x9000-0xafff]
[ 0.179329] pci 0000:00:09.0: bridge window [mem 0xd3000000-0xd4ffffff]
[ 0.179333] pci 0000:00:09.0: bridge window [mem 0x40000000-0x400fffff pref]
[ 0.179337] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[ 0.179342] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.179347] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[ 0.179353] pci 0000:01:00.0: BAR 6: assigned [mem 0xd2000000-0xd201ffff pref]
[ 0.179356] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[ 0.179359] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd2ffffff]
[ 0.179363] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.179371] pci 0000:00:09.0: setting latency timer to 64
[ 0.179381] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.179383] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
[ 0.179386] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.179389] pci_bus 0000:05: resource 0 [io 0x9000-0xafff]
[ 0.179392] pci_bus 0000:05: resource 1 [mem 0xd3000000-0xd4ffffff]
[ 0.179395] pci_bus 0000:05: resource 2 [mem 0x40000000-0x400fffff pref]
[ 0.179398] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.179400] pci_bus 0000:05: resource 5 [mem 0x40000000-0xffffffff]
[ 0.179403] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.179407] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
[ 0.179409] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.179448] NET: Registered protocol family 2
[ 0.179507] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.179755] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.179755] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.179755] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.179755] TCP reno registered
[ 0.179755] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.179755] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.179755] NET: Registered protocol family 1
[ 0.179755] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.246787] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.246848] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.246854] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 0.246861] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.246866] pci 0000:00:0b.0: Linking AER extended capability
[ 0.246900] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.246906] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 0.246913] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.246916] pci 0000:00:0c.0: Linking AER extended capability
[ 0.246953] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.246959] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 0.246966] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.246969] pci 0000:00:0d.0: Linking AER extended capability
[ 0.247010] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.247015] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 0.247022] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.247025] pci 0000:00:0e.0: Linking AER extended capability
[ 0.247045] pci 0000:01:00.0: Boot video device
[ 0.247048] PCI: CLS 32 bytes, default 64
[ 0.247104] Unpacking initramfs...
[ 0.317791] Freeing initrd memory: 2848k freed
[ 0.319628] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 0.319631] apm: overridden by ACPI.
[ 0.319848] audit: initializing netlink socket (disabled)
[ 0.319861] type=2000 audit(1338126992.316:1): initialized
[ 0.320176] highmem bounce pool size: 64 pages
[ 0.320181] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.322161] VFS: Disk quotas dquot_6.5.2
[ 0.322222] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.322310] msgmni has been set to 1740
[ 0.322474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.322510] io scheduler noop registered
[ 0.322512] io scheduler deadline registered
[ 0.322518] io scheduler cfq registered (default)
[ 0.322633] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.322689] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 0.322745] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 0.322794] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 0.322982] GHES: HEST is not enabled!
[ 0.322995] isapnp: Scanning for PnP cards...
[ 0.678365] isapnp: No Plug & Play device found
[ 0.678420] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.698839] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.719501] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.719786] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.970407] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.970501] mousedev: PS/2 mouse device common for all mice
[ 0.970574] rtc_cmos 00:04: RTC can wake from S4
[ 0.970673] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.970693] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.970715] cpuidle: using governor ladder
[ 0.970717] cpuidle: using governor menu
[ 0.970929] TCP cubic registered
[ 0.971059] NET: Registered protocol family 10
[ 0.971516] NET: Registered protocol family 17
[ 0.971522] Registering the dns_resolver key type
[ 0.971541] Using IPI No-Shortcut mode
[ 0.971626] PM: Hibernation image not present or could not be loaded.
[ 0.971635] registered taskstats version 1
[ 0.971980] rtc_cmos 00:04: setting system clock to 2012-05-27 13:56:33 UTC (1338126993)
[ 0.972030] Initializing network drop monitor service
[ 0.972083] Freeing unused kernel memory: 520k freed
[ 0.972380] Write protecting the kernel text: 3776k
[ 0.972401] Write protecting the kernel read-only data: 1112k
[ 0.983214] udevd[32]: starting version 182
[ 1.036424] usbcore: registered new interface driver usbfs
[ 1.036449] usbcore: registered new interface driver hub
[ 1.040374] SCSI subsystem initialized
[ 1.041939] usbcore: registered new device driver usb
[ 1.042240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.042288] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.042292] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.042319] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.042343] ehci_hcd 0000:00:02.1: debug port 1
[ 1.042349] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
[ 1.042367] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd5005000
[ 1.043072] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.046296] libata version 3.00 loaded.
[ 1.048421] sata_sil 0000:05:0a.0: version 2.4
[ 1.048533] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.048566] sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
[ 1.050034] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.050191] hub 1-0:1.0: USB hub found
[ 1.050196] hub 1-0:1.0: 10 ports detected
[ 1.050413] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.050416] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.050426] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.050448] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd5004000
[ 1.052061] scsi0 : sata_sil
[ 1.055247] scsi1 : sata_sil
[ 1.058388] scsi2 : sata_sil
[ 1.061600] scsi3 : sata_sil
[ 1.061664] ata1: SATA max UDMA/100 mmio m1024@0xd400a000 tf 0xd400a080 irq 19
[ 1.061668] ata2: SATA max UDMA/100 mmio m1024@0xd400a000 tf 0xd400a0c0 irq 19
[ 1.061671] ata3: SATA max UDMA/100 mmio m1024@0xd400a000 tf 0xd400a280 irq 19
[ 1.061675] ata4: SATA max UDMA/100 mmio m1024@0xd400a000 tf 0xd400a2c0 irq 19
[ 1.105505] hub 2-0:1.0: USB hub found
[ 1.105512] hub 2-0:1.0: 10 ports detected
[ 1.105590] sata_nv 0000:00:07.0: version 3.5
[ 1.105767] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 1.105822] sata_nv 0000:00:07.0: setting latency timer to 64
[ 1.106449] scsi4 : sata_nv
[ 1.106566] scsi5 : sata_nv
[ 1.106702] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
[ 1.106706] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
[ 1.106854] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 1.106899] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.107330] scsi6 : sata_nv
[ 1.107449] scsi7 : sata_nv
[ 1.107557] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20
[ 1.107560] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20
[ 1.107616] pata_amd 0000:00:06.0: version 0.4.1
[ 1.107645] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.108469] scsi8 : pata_amd
[ 1.108594] scsi9 : pata_amd
[ 1.109000] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.109003] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.330027] Refined TSC clocksource calibration: 2211.331 MHz.
[ 1.330032] Switching to clocksource tsc
[ 1.373866] ata9.00: ATAPI: SONY DVD-ROM DDU1613, 9YS2, max UDMA/33
[ 1.373872] ata9.01: ATAPI: SONY DVD RW DW-D22A, BYS2, max UDMA/66
[ 1.373879] ata9: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c50000) ACPI=0x701f (60:30:0x1f)
[ 1.373884] ata9: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc0c50000) ACPI=0x1f01f (60:30:0x1f)
[ 1.374258] ata9.00: configured for UDMA/33
[ 1.383354] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.386828] ata9.01: configured for UDMA/66
[ 1.397081] ata1.00: ATA-6: HDS722525VLSA80, V36OA6MA, max UDMA/100
[ 1.397084] ata1.00: 488397168 sectors, multi 16: LBA48
[ 1.417086] ata1.00: configured for UDMA/100
[ 1.417191] scsi 0:0:0:0: Direct-Access ATA HDS722525VLSA80 V36O PQ: 0 ANSI: 5
[ 1.420013] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.420027] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.736680] ata2: SATA link down (SStatus 0 SControl 310)
[ 1.743343] usb 2-3: new low-speed USB device number 2 using ohci_hcd
[ 2.056681] ata3: SATA link down (SStatus 0 SControl 310)
[ 2.220006] usb 2-4: new full-speed USB device number 3 using ohci_hcd
[ 2.376680] ata4: SATA link down (SStatus 0 SControl 310)
[ 2.419383] hub 2-4:1.0: USB hub found
[ 2.422367] hub 2-4:1.0: 2 ports detected
[ 2.690007] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.713340] usb 2-10: new low-speed USB device number 4 using ohci_hcd
[ 3.003340] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.003821] scsi 8:0:0:0: CD-ROM SONY DVD-ROM DDU1613 9YS2 PQ: 0 ANSI: 5
[ 3.004807] scsi 8:0:1:0: CD-ROM SONY DVD RW DW-D22A BYS2 PQ: 0 ANSI: 5
[ 3.192270] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 3.192313] sd 0:0:0:0: [sda] Write Protect is off
[ 3.192316] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.192335] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.203925] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input0
[ 3.204011] generic-usb 0003:046D:C063.0001: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:02.0-3/input0
[ 3.204121] usbcore: registered new interface driver usbhid
[ 3.204123] usbhid: USB HID core driver
[ 3.206210] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 3.206215] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.206408] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 3.207374] sda: sda1 sda2 sda3 sda4
[ 3.207725] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.209438] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.209644] sr 8:0:1:0: Attached scsi CD-ROM sr1
[ 3.219118] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0/input/input1
[ 3.219720] logitech 0003:046D:C50C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-10/input0
[ 3.228377] logitech 0003:046D:C50C.0003: fixing up Logitech keyboard report descriptor
[ 3.231342] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.1/input/input2
[ 3.232510] logitech 0003:046D:C50C.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-10/input1
[ 3.668390] usb 2-4.1: new low-speed USB device number 5 using ohci_hcd
[ 3.790466] input: Logitech Desktop USB stand as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.1/2-4.1:1.0/input/input3
[ 3.790664] generic-usb 0003:046D:ABD0.0004: input,hiddev0,hidraw3: USB HID v1.10 Keyboard [Logitech Desktop USB stand] on usb-0000:00:02.0-4.1/input0
[ 4.738194] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.853738] udevd[230]: starting version 182
[ 6.424070] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.424074] ACPI: Thermal Zone [THRM] (40 C)
[ 6.424756] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 6.424762] ACPI: Power Button [PWRB]
[ 6.424829] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.424833] ACPI: Power Button [PWRF]
[ 6.531468] ACPI: Fan [FAN] (on)
[ 6.557938] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 59659kHz
[ 6.563497] IT8712 SuperIO detected.
[ 6.563716] parport_pc 00:09: reported by Plug and Play ACPI
[ 6.563763] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 6.567244] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.607796] ppdev: user-space parallel port driver
[ 6.624664] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 6.676743] firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 6.677042] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 6.677091] skge: 1.14 addr 0xd4004000 irq 17 chip Yukon-Lite rev 7
[ 6.677584] skge 0000:05:0c.0: eth0: addr 00:11:d8:37:b2:f9
[ 6.699836] Floppy drive(s): fd0 is 1.44M
[ 6.716478] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 6.716637] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 6.716644] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 6.717736] FDC 0 is a post-1991 82077
[ 6.749918] Linux agpgart interface v0.103
[ 7.086279] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243)
[ 7.086285] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
[ 7.086290] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243)
[ 7.086294] ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[ 7.086299] ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243)
[ 7.086303] ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
[ 7.089653] ssb: Sonics Silicon Backplane found on PCI device 0000:05:07.0
[ 7.126862] cfg80211: Calling CRDA to update world regulatory domain
[ 7.176776] firewire_core: created device fw0: GUID 0011d8000000678b, S400
[ 7.240821] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:11:d8:37:a7:42
[ 7.240826] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 7.241088] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[ 7.241114] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[ 7.241405] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 7.241428] snd_intel8x0 0000:00:04.0: setting latency timer to 64
[ 7.386441] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4)
[ 7.560025] intel8x0_measure_ac97_clock: measured 50564 usecs (2488 samples)
[ 7.560029] intel8x0: clocking to 46825
[ 7.622698] nvidia: module license 'NVIDIA' taints kernel.
[ 7.622702] Disabling lock debugging due to kernel taint
[ 7.654334] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 7.654357] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.654955] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.49 Mon Apr 30 23:30:07 PDT 2012
[ 7.657409] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.657999] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
[ 9.880314] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 9.992201] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 9.993651] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 10.094819] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 10.171043] Adding 4096568k swap on /dev/sda2. Priority:-1 extents:1 across:4096568k
[ 12.706681] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
[ 12.774910] Registered led device: b43legacy-phy0::tx
[ 12.775228] Registered led device: b43legacy-phy0::rx
[ 12.775546] Registered led device: b43legacy-phy0::radio
[ 12.800241] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.807335] skge 0000:05:0c.0: eth0: enabling interface
[ 12.812861] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.818147] forcedeth 0000:00:0a.0: eth1: no link during initialization
[ 12.818697] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 16.030022] wlan0: authenticate with bc:ae:c5:c3:4c:e3 (try 1)
[ 16.033527] wlan0: authenticated
[ 16.066683] wlan0: associate with bc:ae:c5:c3:4c:e3 (try 1)
[ 16.068994] wlan0: RX AssocResp from bc:ae:c5:c3:4c:e3 (capab=0x411 status=0 aid=6)
[ 16.068997] wlan0: associated
[ 16.069001] wlan0: moving STA bc:ae:c5:c3:4c:e3 to state 1
[ 16.069003] wlan0: moving STA bc:ae:c5:c3:4c:e3 to state 2
[ 16.080313] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.157459] Intel AES-NI instructions are not detected.
[ 16.164801] wlan0: moving STA bc:ae:c5:c3:4c:e3 to state 3
[ 24.111561] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 24.268251] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 27.110004] wlan0: no IPv6 routers present
[ 43.360438] b43legacy-phy0 warning: Unexpected value for chanstat (0x7C00)
Everything.log snippet (right before freeze #1):
May 12 12:21:01 localhost -- MARK --
May 12 12:41:01 localhost -- MARK --
May 12 13:01:01 localhost /USR/SBIN/CROND[4753]: (root) CMD (run-parts /etc/cron.hourly)
May 12 13:16:28 localhost kernel: [76481.010966] b43legacy-phy0 warning: Unexpected value for chanstat (0x7C00)
May 12 13:18:57 localhost kernel: [76629.990174] emerald-theme-m[4784]: segfault at 18 ip b7336935 sp bfada630 error 4 in libgtk-x11-2.0.so.0.2400.10[b728d000+454000]
May 12 13:19:22 localhost kernel: [76655.367954] emerald-theme-m[4797]: segfault at 18 ip b7328935 sp bf8ecb20 error 4 in libgtk-x11-2.0.so.0.2400.10[b727f000+454000]
May 12 13:19:37 localhost kernel: [76669.865753] emerald-theme-m[4806]: segfault at 18 ip b7367935 sp bf9c1c70 error 4 in libgtk-x11-2.0.so.0.2400.10[b72be000+454000]
May 12 13:20:00 localhost kernel: [76692.879466] emerald-theme-m[4815]: segfault at 18 ip b73c0935 sp bfe15100 error 4 in libgtk-x11-2.0.so.0.2400.10[b7317000+454000]
May 12 13:20:14 localhost kernel: [76707.084110] emerald-theme-m[4824]: segfault at 18 ip b736a935 sp bf983520 error 4 in libgtk-x11-2.0.so.0.2400.10[b72c1000+454000]
May 12 13:20:14 localhost kernel: [76707.085552] BUG: unable to handle kernel NULL pointer dereference at 00000090
May 12 13:20:14 localhost kernel: [76707.085558] IP: [<c01f1445>] shmem_find_get_pages_and_swap+0x65/0xf0
May 12 13:20:14 localhost kernel: [76707.085566] *pde = 00000000
May 12 13:20:14 localhost kernel: [76707.085570] Oops: 0000 [#1] PREEMPT SMP
May 12 13:20:14 localhost kernel: [76707.085573] Modules linked in: fuse aes_i586 cryptd aes_generic snd_cs4236 snd_mpu401 nvidia(PO) arc4 b43legacy mac80211 cfg80211 rfkill snd_wavefront snd_intel8x0 snd_wss_lib snd_mpu401_uart snd_ac97_codec snd_rawmidi ac97_bus snd_pcm snd_opl3_lib snd_hwdep snd_page_alloc snd_timer snd_seq_device snd soundcore firewire_ohci ssb ns558 gameport agpgart firewire_core ppdev pcmcia skge mmc_core forcedeth serio_raw processor fan pcspkr i2c_nforce2 parport_pc floppy i2c_core asus_atk0110 button thermal pcmcia_core parport joydev evdev crc_itu_t k8temp ext4 crc16 jbd2 mbcache hid_logitech ff_memless sr_mod cdrom usbhid hid sd_mod pata_acpi sata_sil pata_amd ata_generic sata_nv ohci_hcd ehci_hcd libata scsi_mod usbcore usb_common
May 12 13:20:14 localhost kernel: [76707.085618]
May 12 13:20:14 localhost kernel: [76707.085621] Pid: 622, comm: Xorg Tainted: P O 3.3.5-1-ARCH #1 Magnell System name/A8N-SLI DELUXE
May 12 13:20:14 localhost kernel: [76707.085626] EIP: 0060:[<c01f1445>] EFLAGS: 00013246 CPU: 0
May 12 13:20:14 localhost kernel: [76707.085629] EIP is at shmem_find_get_pages_and_swap+0x65/0xf0
May 12 13:20:14 localhost kernel: [76707.085632] EAX: f524387c EBX: 00000002 ECX: 00000001 EDX: 00000080
May 12 13:20:14 localhost kernel: [76707.085634] ESI: f443fde0 EDI: f443fe28 EBP: f443fda4 ESP: f443fd74
May 12 13:20:14 localhost kernel: [76707.085637] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
May 12 13:20:14 localhost kernel: [76707.085640] Process Xorg (pid: 622, ti=f443e000 task=f5b124c0 task.ti=f443e000)
May 12 13:20:14 localhost kernel: [76707.085642] Stack:
May 12 13:20:14 localhost kernel: [76707.085643] 0000003e 0000000e 00000001 dca13574 0000000e 0000003e 00000003 00000002
May 12 13:20:14 localhost kernel: [76707.085649] 00000002 0000003e f443fde0 f443fe58 f443fe64 c01f2d98 f443fe20 f443fde0
May 12 13:20:14 localhost kernel: [76707.085654] f443fe9c f6f2a180 00000000 dca134a0 00000000 f443fe20 00000000 00000000
May 12 13:20:14 localhost kernel: [76707.085659] Call Trace:
May 12 13:20:14 localhost kernel: [76707.085664] [<c01f2d98>] shmem_truncate_range+0xe8/0x4f0
May 12 13:20:14 localhost kernel: [76707.085668] [<c01f33bc>] shmem_evict_inode+0xac/0x120
May 12 13:20:14 localhost kernel: [76707.085669] [<c0240e0e>] evict+0x8e/0x170
May 12 13:20:14 localhost kernel: [76707.085669] [<c02412db>] iput+0xcb/0x1b0
May 12 13:20:14 localhost kernel: [76707.085669] [<c023de57>] d_kill+0xa7/0xf0
May 12 13:20:14 localhost kernel: [76707.085669] [<c023e461>] dput+0xc1/0x170
May 12 13:20:14 localhost kernel: [76707.085669] [<c022b908>] fput+0x128/0x1d0
May 12 13:20:14 localhost kernel: [76707.085669] [<c0200eab>] remove_vma+0x2b/0x60
May 12 13:20:14 localhost kernel: [76707.085669] [<c0201e8a>] do_munmap+0x15a/0x2c0
May 12 13:20:14 localhost kernel: [76707.085669] [<c02906fb>] sys_shmdt+0x9b/0x140
May 12 13:20:14 localhost kernel: [76707.085669] [<c0290ae3>] sys_ipc+0x223/0x280
May 12 13:20:14 localhost kernel: [76707.085669] [<c0152ca8>] ? sys_clock_gettime+0x48/0x70
May 12 13:20:14 localhost kernel: [76707.085669] [<c04ae79f>] sysenter_do_call+0x12/0x28
May 12 13:20:14 localhost kernel: [76707.085669] Code: 24 e8 70 d7 0e 00 85 c0 89 45 e8 0f 84 8e 00 00 00 8b 7d 08 31 db c7 45 ec 00 00 00 00 90 8b 07 8b 10 85 d2 74 3d f6 c2 03 75 5e <8b> 4a 10 89 5d d8 85 c9 74 61 8d 59 01 89 c8 89 5d f0 3e 0f b1
May 12 13:20:14 localhost kernel: [76707.085669] EIP: [<c01f1445>] shmem_find_get_pages_and_swap+0x65/0xf0 SS:ESP 0068:f443fd74
May 12 13:20:14 localhost kernel: [76707.085669] CR2: 0000000000000090
May 12 13:20:14 localhost kernel: [76707.085769] ---[ end trace 2165add98098eec7 ]---
May 12 13:20:34 localhost kernel: [76726.967091] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
May 12 13:20:34 localhost kernel: [76727.311089] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
May 12 13:20:35 localhost kernel: [76727.543078] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
May 12 13:20:46 localhost kernel: [76738.927100] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
May 12 13:20:46 localhost kernel: [76739.191099] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
May 12 13:20:46 localhost kernel: [76739.399099] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
May 12 13:20:47 localhost kernel: [76739.631099] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
May 12 13:20:47 localhost kernel: [76739.847099] SysRq : HMay 12 13:22:02 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
May 12 13:22:02 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
May 12 13:22:02 localhost kernel: [ 0.000000] Linux version 3.3.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 8 05:10:33 UTC 2012
May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-provided physical RAM map:
May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
May 12 13:22:02 localhost syslog-ng[443]: syslog-ng starting up; version='3.3.5'
May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
May 12 13:22:02 localhost kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
May 12 13:22:02 localhost kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
May 12 13:22:02 localhost kernel: [ 0.000000] DMI 2.3 present.
May 12 13:22:02 localhost kernel: [ 0.000000] DMI: Magnell System name/A8N-SLI DELUXE, BIOS ASUS A8N-SLI DELUXE ACPI BIOS Revision 1002 11/26/2004
Everything.log #2 (before freeze #2)
May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmManager: ending phase EXIT
May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): Unreffing manager
May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmManager: disposing manager
May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Clearing object store
May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Unreffing object: 0xa09dc18
May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Unreffing object: 0xa09dc90
May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Clearing object store
May 25 14:32:20 localhost gnome-session[733]: DEBUG(+): GsmStore: Clearing object store
May 25 14:32:20 localhost gdm-simple-slave[625]: WARNING: Child process 733 was already dead.
May 25 18:32:22 localhost rtkit-daemon[797]: Successfully made thread 905 of process 905 (/usr/bin/pulseaudio) owned by '1001' high priority at nice level -11.
May 25 18:32:22 localhost rtkit-daemon[797]: Supervising 4 threads of 2 processes of 2 users.
May 25 14:32:22 loMy thought process was followed similar lines.
I have kept track of what has been going when freezes occur and there does not seem to be any pattern to running programs at the time of the crashes.
I have let memtest (from the arch installation cd) run for over 10 hours and it does not detect any memory problems.
I have considered hard drive problems as well. I ran Steve Gibson's SpinRite software on the hard disk on every level it has including dynastat. SpinRite can not detect a single problem with the surface of the disk or the way data is read from it.
As far as temp goes it does not feel overly hot when the system freezes but I suppose that it is possible. I am not sure how to set up monitoring for that. I guess I could find some kind of gui or command line tool that runs in a loop and outputs temp info to a file that I could review after a crash. I'll try that but my gut says that it is going to be something else.
There are seg faults and other messages in the logs and command output that I have attached above that look suspicious to me but unfortunately I don't know enough to make use of them. Google does not seem to be shedding any light on the situation for me either. Is there anything in there that should be sticking out at me?
Thanks for taking the time to read my post and for replying. Also, thanks in advance to anyone who takes the time to post a follow up. I appreciate the help. -
System freezes(Hangs) if I use Print Button
Hello,
I created few dashboards using SAP xMII.Once I logon to the application, if I press Print button to take the print of the Dashboard screen, System Freezes(Hangs).
Than I have to use Task Manager and kill SAP xMII session thread to close the application.
Did any body came across similar kind of experience or knows about the problem?
Help will be highly appreciated.
Regards
RamanRaman
R using window.print() function for this or wat?
One important thing to remember
<b>A printer friendly page is really just a page with text, no images, graphics, navigation or advertising.
</b>
Regards
Som -
Solved\ Random lockups/system freezes AMD 6850 crossfire mode
Hello all,
I have come to these forums because i have a problem for 4 months now and i cant seem to figure out.
First my systemspecs:
Asrock X79 extreme 4 slot 2011 (Bios version 2.0 (latest))
Intel i7 3820
16 Gig Geil 1600 DDR 3 memory (4 dimms)
2 x MSI R6850 Cyclone Power Edition/OC (crossfire mode with bridge)
1 x OCZ agility 3 SATA III 2.5" SSD 120GB (System drive)
2 x Samsung HDD 500GB 7200rpm
TG600-BZ 600 Watt maxx 24 amps
Running Windows 7 64bit
Catalyst 12.6
12.7 CAP1
So my problem:
When i have 2 cards inserted in crossfire mode my system goes true random lock ups and freezes. Up to several times a day.
While heavy load and gaming i sometime hear the system hang for a few seconds (sounds hangs system freezez) and then it continues to run.. usually that happens about 5-6 times before the system hangs locks up and does not respond anymore.. (i can hear the sounds hanging) and have to do a reset.
I had a few BSOD's getting the well know ATIKMPAG.sys error but that happen only twice.
Funny thing is that it does not always does this while under heavy load but also while doing YouTube video's.. even had one while cooking dinner.. (computer not in use).
Seems to be completely random.
So what have i done to fix the problem:
I have done a complete clean install of windows 7 only running basic drivers and hardware.. problem persists
Check system event log on any problems but since it does sudden lockups there are no logs of these hardware events.
Did a check on my power saving options in windows.. made sure all were on performance.
I have run true Catalyst 12.1 to 12.6 and all kinds of cap's.. problem persists
Checked temp, does not come above 70 degrees Celsius. (case temp not above 30)
Made sure i run the latest BIOS version of my motherboard.
Run a 24 hours memory test with memtest86+ no errors.
Did a heavy load and MSI burn in test on the single cards separately from each other continues to run perfectly.
I have run both cards separately from each other in my system (single card mode) for 2 weeks...(both PCIE slots) system runs like a charm.. no lockups no random freezes.
So i hope anyone can help me, i have some experience troubleshooting computer problems but this one has me baffled.
TheAbeLQuote from: TheAbel on 19-July-12, 14:19:47
This is indeed the Tagan piperock 600 watt. Problem is that i have no idea how much amp my cards are pulling from 1 rail.. are they trying to pull it all from 1 rail? or are they getting power from 2 different rails. If my crossfire setup is pulling al his power from 1 rail i still have a problem..
Also i read in the review (my german is rusty but ok, tnx xmad) that when turbo mode is enabled that all rails work as one rail.. so 80 amp is available? Is this even possibly?
My new PSU will arrive today so i will report tomorrow if it has solved the issue or not.
No, as noted in my last reply for your PSU: "48A combined total for +12V rails". Max for any individual 12V rail is 20A. If three of the rails are loaded to total of 48A then the 4th is useless. You can't just add up 20+20+20+20 & come up with 80, it doesn't work that way on PSU although Antec seems to think so. -
[Solved] System freezes after 10 minutes if no monitor attached
I've got a server machine that has been running Arch for a month now. It has had a problem of constant freezing all the time. At first it seemed completely random but today I noticed the system freezes up exactly after 10.00 minutes of uptime, if there is no monitor plugged into the system. If I unplug the display after ten minutes, the system will run fine as long as I want to (days, weeks) without it. Ten minutes is also the time after which the monitor will go into stand-by mode. Seems like some kind of a power-saving bug? No entries in any log file @ /var/log...
The system runs only basic home network functionalities; it serves as an NFS server, a print server (CUPS) and runs Lighttpd as a web server. It doesn't do Xorg nor has any fancy kernel modules loaded either. The system is up-to-date (stable repos). No custom-built software.
Somewhat sad since I previously ran NetBSD on the server, but it didn't support my printer-scanner (only printer OR scanner, one at a time), then switched to FreeBSD which failed with my new WLAN card, so then turned to Arch that I've ran on desktop for years now (also like the BSD-ness), and then this...
Last edited by sj87 (2010-02-07 18:47:43)Case closed, the source of trouble was once again kernel mode-setting (I think)... I blacklisted the drm_kms_helper module and some other stuff and that disabled the KMS functionality, and the server now doesn't freeze at any point.
Last edited by sj87 (2010-02-07 18:48:23) -
Satellite A210-1UP - Every few minutes the system freezes
Hi,
I just installed windows 7 32 bit on a satellite A210-1UP
Every few minutes the system freezes and then continues as if nothing happened.
No errors or blue screens are displayed
I would like to know if windows 7 can run without problems on this system ?
Which is the recommended bios version to run windows 7 ?
Thanks in advance !
Kind Regards
StijnHi buddy,
Yes, Windows 7 works on Satellite A210 properly, the hardware is powerful enough.
I dont think the freezes are problem of Windows 7 or your notebook itself, I think its a software malfunction Have you installed all drivers and are yellow exclamation marks in device manager?
Such freezes could be also caused by security software or if you run a lot of background processes. Good security software is AntiVir in my opinion so I can recommend this program to you.
Also check the startup folder and msconfig (start > run > msconfig). There are all programs listed they startup with Windows and you can disable the programs that you dont need at startup like Adobe Reader, Java Updater, Nero tools, etc. but thats depending on installed software. ;) -
K8N Neo2 Platinum System Freeze
Here's my issue: A complete system freeze that happens after ten minutes or 2 hours (or anywhere in between). There is no pattern (except that it seems more likely to happen under more intensive apps).
My motherboard and processor have both been RMAd once. The AMD rep confirmed that my processor appeared to be unstable under high stress (uhh, never heard of this before). He said that it was a very unusual problem, and they promptly sent me a new one. I tried the new processor with the same mobo and had the same problem. I then RMAd the mobo. The MSI reps sent me a new motherboard but never said exactly what was wrong with my old one. Now, I'm still having problems (I just put the computer together this evening).
I've heard the same stuff in other threads about memory timings and 12V rail issues. I guess I could try to RMA my four sticks of RAM and power supply, but I somehow doubt that will fix things.
Note also that I have built a system almost identical to mine for my brother, and he has no system freezes. The differences are that he has only two sticks of the Crucial RAM, is using AUTO voltage, has 1T/2T set to AUTO (always loads as 2T), and has a PC Power and Cooling power supply. Aside from that, the systems are identical. I have tried his RAM settings and still experience freezing.
I've been running now for almost 20 minutes with a record of almost 1 continuous hour tonight.
I've never had a freeze like this before - no errors, nothing in the event logs, video stays on screen, fans are running, but everything else stops cold. Very strange.
I am really beginning to regret using this platform. I heard all the hype and decided to go for the AMD/MSI combo eventhough I've always used INTEL/ASUS or INTEL/SUPERMICRO before. I guarantee you that I wouldn't be having these issues with either of those combos. I really need to have a stable system for my primary workstation. I guess my mood can be best described as upset with a little confused and angry thrown in.
Any help is appreciated.I completely removed my PSU from my system (disconnected everything) and benched it as per Antec's explicit directions. Here's what I found:
3.3 Volt Rail (32A): I have 3.36V
5 Volt Rail (40A): I have 5.11V
12 Volt Rail (30A): I have 12.01V
These findings, of course, have not ruled out the power supply being at fault, and I still intend to send off my additional RAM to my brother for testing tomorrow.
The reason why I haven't sent it off yet is that I was kind enough to play along with MSI tech support and try BIOS 1.36 (1.3B6) which is date-stamped earlier than my 1.3 final release. The 1.36 version did nothing for my stability problems, and I am going to attempt 1.37 tonight (I understand that that is supposed to be a more recent version).
Quote
Originally posted by Paul Foster
We are merely trying to help you yet you won't even try what we suggest to resolve your problem.
Quote
Originally posted by Paul Foster
Furthermore, I really don't care if it's the mobo that is at fault or not.
Quotations are sometimes more revealing when they placed are back-to-back
Quote
Originally posted by GrumpySmurf
assume that EVERY COMPONENT is bad and that it was assembled incorrectly
...such as memtest...
Grumpy, I've RMA'd both my motherboard and processor. I've tried memtest (it ran perfectly), and I've rebuilt this system at least three times in the course of all of this mess. Thanks for the feedback. Hopefully we'll get to the bottom of this nasty little bug soon!
Quote
Originally posted by Paul Foster
In case you haven't figured it out by now we have absolutely no say one way or the other whether or not you can convince your vendor to RMA the board.
Been there, done that. I RMA'd it a couple weeks ago. The trouble is, the board has the same problems.
I would really like to thank Novablade for his support in this. It's good to have a little sympathy from somebody who has the same board and the same problem. -
System freezes with Safari open; what does this mean...?
Hi:
Once in a while I have Safari open, and then my whole system freezes, even when I have Safari open in the background. The only thing I know for sure is that Safari is open when I get a system freeze.
In the system.log file I found the following warning:
'Sep 17 17:08:12 localhost /Applications/Safari.app/Contents/MacOS/Safari: * Warning: ATSUSetFontFallbacks has been deprecated. Use ATSUFontFallbacks objects instead. *'
Interestingly, I always see this line in the system.log as the last line before my system freezes. Any thoughts?
Kind regards,
BasHi Edwin:
Thank you for your reply. When my Powerbook is physically plugged with an ethernet cable, I will try that. However, at home I connect to the Internet wirelessly, through Airport.
Bas -
MacBook Pro system freezes - please help!
Hi there,
I've been experiencing some system freezes with my MBP recently. I have all the most recent software updates installed and there's really no detectable pattern to the freezes. I usually notice it when the screen has been blanked out for a while -- I'll come back, swipe the trackpad, and the screen will turn on, but the screensaver will be stuck in a certain position, and although the cursor will move no applications will respond and I am forced to hard-reboot by holding the power button down. I've checked some of the logs in Console to see if anything has been noted but haven't had any joy so far. I can't think of anything specific to start looking -- any advice will be REALLY helpful. I've searched the forums but haven't found anything that helps.
Thanks in advance!Hello,
Thank your informative post, as it helps us to troubleshoot much quicker!
You didn't indicate that you had tried resetting the SMC, (System Management Controller) .. so go here, read the information first and follow the instructions... that could be the answer.
If after trying this applications still won't launch or respond, post back.
Carolyn -
Memory issues - kernel panics / system freezes with 1Gb Memory Card
I've recently updated my PowerBook OS to 10.4.7 and now more recently 10.4.8.
Prior to this, i had been running a pair of pc2700 memory cards (1x1Gb + 1x 512Mb) bought from crucial technology on 10.3.9 with no problems.
During the upgrade, i experienced complete system lock ups and kernel panics. pulling the 1Gb card resolved the problem.
So i thought it could be duff memory (it happens). I ran hardware checker, both long and short tests, ran memchecker from single user and there was no reported errors although i was still getting crashes.
I returned the memory to crucial and they replaced it and then i went to reinstall memory in the pb.
Once reinstalled, problems re-emerged. Both System profiler and iStat pro show both memory sticks as ok. both are pc2700 DDR.
i tried just the 1 Gb stick in alternate memory slots. with the memory in the lower slot i was getting system freezes, in the top slot i was getting kernel panics.
I've pulled the 1Gb and reverted to 768Mb (512Mb lower (crucial)/ 256MB (apple) upper) and i'm back to normal.
Now what?
As my mac is getting on, i'd like to get as much RAM in it as i can, ideally the 1.5Gb /2Gb which it can support. I'd be suprised if it could be the memory stick being duff (2 duff in a row?), its not a faulty memory slot as system profiler is showing that its full.
Any suggestions? Anything to do with how 10.4.8 handles the memory addressing?
Any help would be appreciated.
PowerBook G4 1Ghz FW800 Mac OS X (10.4.8)I've had that problem, too. I found out that it was one of my memory modules that were broken.
I'd say pop back in your other memory module, then get out your PowerBook DVD and stick it in Restart your PowerBook while holding down the Option Key on your keyboard until some buttons start to show up on your screen.
Select the Hardware Test one, then click the Arrow button. It'll boot into a utility and you can run a hardware test that includes checking your memory.
If any of your memory is bad, it'll show up like "**ERROR ERROR**" and give you a code.
After you've identified the hardware problem (hopefully just the RAM), then you can go to Crucial's website and fill out an RMA request to have the memory replaced. I'm pretty sure Crucial has a life-time warranty on their memory products. -
Screen flickering and system freezes when using Nouveau driver.
I'm testing the Nouveau driver on my computer, I really want to keep this driver installed because it makes XFCE to use less resources than the Nvidia proprietary driver. But when I start some apps like firefox or make changes to the desktop, the system stop responding and then the screen breaks.
I can't use the computer in that state so I force a shutdown.
I don't know how to see what is going wrong, because the proprietary driver don't give me these problems, I don't get any errors at dmesg log and Xorg log don't have any helpful information.
dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.3-2-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000057feffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000057ff0000-0x0000000057ff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000057ff3000-0x0000000057ffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000058000000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Acer Aspire T180/EM61SM/EM61PM , BIOS R01-B4 06/15/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x57ff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f3c90-0x000f3c9f] mapped at [c00f3c90]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
[ 0.000000] RAMDISK: [mem 0x37a46000-0x37d1afff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37529000-0x377fd69f]
[ 0.000000] Move RAMDISK from [mem 0x37a46000-0x37d1a69f] to [mem 0x37529000-0x377fd69f]
[ 0.000000] ACPI: RSDP 000f8370 00014 (v00 ACRSYS)
[ 0.000000] ACPI: RSDT 57ff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 57ff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 57ff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 57ff0000 00040
[ 0.000000] ACPI: SSDT 57ff95c0 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 57ff9800 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
[ 0.000000] ACPI: SLIC 57ff9880 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001)
[ 0.000000] ACPI: MCFG 57ff9a40 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 57ff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 519MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x57feffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x57feffff]
[ 0.000000] On node 0 totalpages: 360319
[ 0.000000] free_area_init_node: node 0, pgdat c15ab3c0, node_mem_map f6a28200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1040 pages used for memmap
[ 0.000000] HighMem zone: 132066 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x60000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6a05000 s32640 r0 d20608 u53248
[ 0.000000] pcpu-alloc: s32640 r0 d20608 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357503
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2883328 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:00057ff0)
[ 0.000000] Memory: 1415956k/1441728k available (4184k kernel code, 25320k reserved, 1679k data, 560k init, 532424k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc15ba000 - 0xc1646000 ( 560 kB)
.data : 0xc141613e - 0xc15b9d80 (1679 kB)
.text : 0xc1000000 - 0xc141613e (4184 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1908.551 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3818.14 BogoMIPS (lpj=6361836)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003404] Security Framework initialized
[ 0.003415] AppArmor: AppArmor disabled by boot time parameter
[ 0.003432] Mount-cache hash table entries: 512
[ 0.006819] Initializing cgroup subsys cpuacct
[ 0.006822] Initializing cgroup subsys memory
[ 0.006834] Initializing cgroup subsys devices
[ 0.006837] Initializing cgroup subsys freezer
[ 0.006840] Initializing cgroup subsys net_cls
[ 0.006842] Initializing cgroup subsys blkio
[ 0.006879] CPU: Physical Processor ID: 0
[ 0.006882] CPU: Processor Core ID: 0
[ 0.006885] mce: CPU supports 5 MCE banks
[ 0.006896] LVT offset 0 assigned for vector 0xf9
[ 0.006902] process: using AMD E400 aware idle routine
[ 0.006911] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[ 0.007021] Freeing SMP alternatives: 16k freed
[ 0.007977] ACPI: Core revision 20121018
[ 0.015366] ftrace: allocating 18273 entries in 36 pages
[ 0.023490] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059250] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (fam: 0f, model: 6b, stepping: 01)
[ 0.059999] Performance Events: AMD PMU driver.
[ 0.059999] ... version: 0
[ 0.059999] ... bit width: 48
[ 0.059999] ... generic registers: 4
[ 0.059999] ... value mask: 0000ffffffffffff
[ 0.059999] ... max period: 00007fffffffffff
[ 0.059999] ... fixed-purpose events: 0
[ 0.059999] ... event mask: 000000000000000f
[ 0.078439] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083409] CPU 1 irqstacks, hard=f60ba000 soft=f60bc000
[ 0.083412] smpboot: Booting Node 0, Processors #1 OK
[ 0.006666] Initializing CPU#1
[ 0.176732] Brought up 2 CPUs
[ 0.176736] smpboot: Total of 2 processors activated (7637.24 BogoMIPS)
[ 0.177423] devtmpfs: initialized
[ 0.177423] PM: Registering ACPI NVS region [mem 0x57ff0000-0x57ff2fff] (12288 bytes)
[ 0.178162] RTC time: 21:06:38, date: 03/21/13
[ 0.178225] NET: Registered protocol family 16
[ 0.178397] node 0 link 0: io port [8000, ffff]
[ 0.178401] TOM: 0000000060000000 aka 1536M
[ 0.178404] node 0 link 0: mmio [a0000, bffff]
[ 0.178408] node 0 link 0: mmio [60000000, efffffff]
[ 0.178411] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.178414] node 0 link 0: mmio [f0000000, f03fffff]
[ 0.178418] bus: [bus 00-04] on node 0 link 0
[ 0.178421] bus: 00 [io 0x0000-0xffff]
[ 0.178423] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.178425] bus: 00 [mem 0x60000000-0xf3ffffff]
[ 0.178428] bus: 00 [mem 0xf4000000-0xffffffff]
[ 0.178495] ACPI: bus type pci registered
[ 0.178575] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.178579] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.178581] PCI: Using MMCONFIG for extended config space
[ 0.178583] PCI: Using configuration type 1 for base access
[ 0.178677] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.178679] mtrr: probably your BIOS does not setup all CPUs.
[ 0.178681] mtrr: corrected configuration.
[ 0.180670] bio: create slab <bio-0> at 0
[ 0.180670] ACPI: Added _OSI(Module Device)
[ 0.180670] ACPI: Added _OSI(Processor Device)
[ 0.180670] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.180670] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.181260] ACPI: EC: Look up EC in DSDT
[ 0.186070] ACPI: Interpreter enabled
[ 0.186077] ACPI: (supports S0 S3 S4 S5)
[ 0.186098] ACPI: Using IOAPIC for interrupt routing
[ 0.193127] ACPI: No dock devices found.
[ 0.193134] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.193752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[ 0.193756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.193890] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.193894] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.195031] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.195034] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
[ 0.195037] pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored)
[ 0.195040] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
[ 0.195044] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.195047] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xefffffff] (ignored)
[ 0.195050] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
[ 0.195053] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.195057] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470b] (ignored)
[ 0.195060] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80] (ignored)
[ 0.195063] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
[ 0.195066] PCI: root bus 00: hardware-probed resources
[ 0.195117] PCI host bridge to bus 0000:00
[ 0.195121] pci_bus 0000:00: root bus resource [bus 00-04]
[ 0.195124] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.195127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.195130] pci_bus 0000:00: root bus resource [mem 0x60000000-0xf3ffffff]
[ 0.195134] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
[ 0.195161] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[ 0.195341] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[ 0.195384] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[ 0.195397] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
[ 0.195414] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.195421] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
[ 0.195452] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.195469] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[ 0.195516] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[ 0.195527] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.195564] pci 0000:00:02.0: supports D1 D2
[ 0.195567] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.195583] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[ 0.195595] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.195639] pci 0000:00:02.1: supports D1 D2
[ 0.195642] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.195665] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[ 0.195711] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[ 0.195723] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
[ 0.195768] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.195791] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[ 0.195814] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
[ 0.195850] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[ 0.195860] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
[ 0.195866] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.195872] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
[ 0.195877] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.195883] pci 0000:00:08.0: reg 20: [io 0xdc00-0xdc0f]
[ 0.195889] pci 0000:00:08.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
[ 0.195922] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[ 0.195932] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
[ 0.195938] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
[ 0.195944] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
[ 0.195949] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
[ 0.195955] pci 0000:00:08.1: reg 20: [io 0xc800-0xc80f]
[ 0.195961] pci 0000:00:08.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 0.196000] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[ 0.196032] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196051] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[ 0.196081] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196098] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[ 0.196128] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196146] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
[ 0.196154] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.196162] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.196169] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.196177] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.196209] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.196233] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.196253] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.196273] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.196335] pci 0000:01:09.0: [104c:8024] type 00 class 0x0c0010
[ 0.196350] pci 0000:01:09.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
[ 0.196359] pci 0000:01:09.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
[ 0.196412] pci 0000:01:09.0: supports D1 D2
[ 0.196415] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.196444] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.196448] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.196452] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.196456] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
[ 0.196459] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.196462] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.196465] pci 0000:00:04.0: bridge window [mem 0x60000000-0xf3ffffff] (subtractive decode)
[ 0.196469] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
[ 0.196493] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.196498] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.196501] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.196506] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.196548] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
[ 0.196565] pci 0000:03:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.196575] pci 0000:03:00.0: reg 18: [io 0x9c00-0x9cff]
[ 0.196604] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.196648] pci 0000:03:00.0: supports D1 D2
[ 0.196651] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.203353] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.203357] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.203361] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.203365] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.203390] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.203394] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.203398] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.203402] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.203413] pci_bus 0000:00: on NUMA node 0
[ 0.203424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.203569] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.242482] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242536] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242587] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242639] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
[ 0.242689] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242741] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[ 0.242791] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242842] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242894] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
[ 0.242944] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242996] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[ 0.243045] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243098] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.243148] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243204] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 0.243265] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 0.243315] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243375] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 0.243432] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 0.243524] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.243606] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.243688] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.243770] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.243851] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.243933] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.244014] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.244095] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.244176] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.244258] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.244340] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 0.244422] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.244504] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.244586] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.244669] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.244751] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.244833] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.244921] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.245004] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.245086] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.245086] vgaarb: loaded
[ 0.245086] vgaarb: bridge control possible 0000:00:0d.0
[ 0.245086] PCI: Using ACPI for IRQ routing
[ 0.246696] PCI: pci_cache_line_size set to 64 bytes
[ 0.246745] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.246748] e820: reserve RAM buffer [mem 0x57ff0000-0x57ffffff]
[ 0.246902] NetLabel: Initializing
[ 0.246904] NetLabel: domain hash size = 128
[ 0.246906] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.246923] NetLabel: unlabeled traffic allowed by default
[ 0.246950] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.246956] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.246961] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.256702] Switching to clocksource hpet
[ 0.264319] pnp: PnP ACPI init
[ 0.264346] ACPI: bus type pnp registered
[ 0.264605] system 00:00: [io 0x1000-0x107f] has been reserved
[ 0.264609] system 00:00: [io 0x1080-0x10ff] has been reserved
[ 0.264613] system 00:00: [io 0x1400-0x147f] has been reserved
[ 0.264616] system 00:00: [io 0x1480-0x14ff] has been reserved
[ 0.264620] system 00:00: [io 0x1800-0x187f] has been reserved
[ 0.264623] system 00:00: [io 0x1880-0x18ff] has been reserved
[ 0.264628] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.264631] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
[ 0.264635] system 00:00: [mem 0x58000000-0x5fffffff] has been reserved
[ 0.264641] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265431] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.265434] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.265438] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.265442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265458] pnp 00:02: [dma 4]
[ 0.265495] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.265606] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.265670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265714] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.265772] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.266190] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.266522] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.266948] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.267129] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.267201] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.267285] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.267290] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267506] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.267510] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.267514] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.267517] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.267521] system 00:0d: [mem 0xfeff0000-0xfeff00ff] has been reserved
[ 0.267525] system 00:0d: [mem 0x57ff0000-0x57ffffff] could not be reserved
[ 0.267528] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.267532] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.267535] system 00:0d: [mem 0x00100000-0x57feffff] could not be reserved
[ 0.267539] system 00:0d: [mem 0x58000000-0x5fffffff] has been reserved
[ 0.267543] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.267546] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.267550] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.267554] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.267557] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.267561] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.267565] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.267589] pnp: PnP ACPI: found 14 devices
[ 0.267590] ACPI: ACPI bus type pnp unregistered
[ 0.305593] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
[ 0.305599] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.305603] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.305608] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.305612] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
[ 0.305617] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.305621] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.305625] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.305629] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.305635] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
[ 0.305638] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.305641] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.305645] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.305649] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.305654] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.305657] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.305661] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.305665] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.305677] pci 0000:00:04.0: setting latency timer to 64
[ 0.305686] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.305689] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.305692] pci_bus 0000:00: resource 6 [mem 0x60000000-0xf3ffffff]
[ 0.305696] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
[ 0.305699] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.305702] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.305706] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref]
[ 0.305709] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.305712] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.305715] pci_bus 0000:01: resource 6 [mem 0x60000000-0xf3ffffff]
[ 0.305718] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
[ 0.305722] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.305725] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.305729] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.305732] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
[ 0.305735] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.305738] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.305742] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
[ 0.305745] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.305748] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.305804] NET: Registered protocol family 2
[ 0.305997] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.306061] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.306122] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.306184] TCP: reno registered
[ 0.306188] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.306204] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.306279] NET: Registered protocol family 1
[ 0.306537] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.370181] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.370249] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370299] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370357] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370411] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370469] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370531] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370598] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370606] pci 0000:00:0d.0: Boot video device
[ 0.370621] PCI: CLS 64 bytes, default 64
[ 0.370687] Unpacking initramfs...
[ 0.455995] Freeing initrd memory: 2900k freed
[ 0.459106] apm: BIOS not found.
[ 0.459448] audit: initializing netlink socket (disabled)
[ 0.459468] type=2000 audit(1363899998.456:1): initialized
[ 0.474029] bounce pool size: 64 pages
[ 0.474052] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.476263] VFS: Disk quotas dquot_6.5.2
[ 0.476327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.476593] msgmni has been set to 1731
[ 0.476998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.477042] io scheduler noop registered
[ 0.477044] io scheduler deadline registered
[ 0.477053] io scheduler cfq registered (default)
[ 0.477195] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.477269] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 0.477329] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 0.477469] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.477471] vesafb: scrolling: redraw
[ 0.477474] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.477558] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1216k, total 1216k
[ 0.484141] Console: switching to colour frame buffer device 80x30
[ 0.490611] fb0: VESA VGA frame buffer device
[ 0.490704] GHES: HEST is not enabled!
[ 0.490719] isapnp: Scanning for PnP cards...
[ 0.802592] isapnp: No Plug & Play device found
[ 0.802671] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.823231] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.843779] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.844469] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.844915] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.844951] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.845087] mousedev: PS/2 mouse device common for all mice
[ 0.845182] rtc_cmos 00:04: RTC can wake from S4
[ 0.845358] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.845400] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.845435] cpuidle: using governor ladder
[ 0.845437] cpuidle: using governor menu
[ 0.845439] EFI Variables Facility v0.08 2004-May-17
[ 0.845489] drop_monitor: Initializing network drop monitor service
[ 0.845593] TCP: cubic registered
[ 0.845736] NET: Registered protocol family 10
[ 0.845940] NET: Registered protocol family 17
[ 0.845958] Key type dns_resolver registered
[ 0.846129] Using IPI No-Shortcut mode
[ 0.846264] PM: Hibernation image not present or could not be loaded.
[ 0.846279] registered taskstats version 1
[ 0.846851] Magic number: 5:851:146
[ 0.846912] acpi device:17: hash matches
[ 0.846972] rtc_cmos 00:04: setting system clock to 2013-03-21 21:06:39 UTC (1363899999)
[ 0.847246] Freeing unused kernel memory: 560k freed
[ 0.847645] Write protecting the kernel text: 4188k
[ 0.847679] Write protecting the kernel read-only data: 1284k
[ 0.858078] systemd-udevd[45]: starting version 198
[ 0.864682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.904637] ACPI: bus type usb registered
[ 0.904681] usbcore: registered new interface driver usbfs
[ 0.904697] usbcore: registered new interface driver hub
[ 0.904815] usbcore: registered new device driver usb
[ 0.906826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.908458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.908536] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.908541] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.908550] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 0.908594] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 0.910252] ehci-pci: EHCI PCI platform driver
[ 0.910290] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 0.910329] firewire_ohci 0000:01:09.0: setting latency timer to 64
[ 0.912040] SCSI subsystem initialized
[ 0.915768] ACPI: bus type scsi registered
[ 0.918637] libata version 3.00 loaded.
[ 0.962268] hub 1-0:1.0: USB hub found
[ 0.962279] hub 1-0:1.0: 10 ports detected
[ 0.962535] ehci-pci 0000:00:02.1: setting latency timer to 64
[ 0.962539] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.962547] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 0.962559] ehci-pci 0000:00:02.1: debug port 1
[ 0.962589] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 0.962617] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 0.970035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.970261] hub 2-0:1.0: USB hub found
[ 0.970268] hub 2-0:1.0: 10 ports detected
[ 0.970681] pata_amd 0000:00:06.0: version 0.4.1
[ 0.970736] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.971618] scsi0 : pata_amd
[ 0.972200] scsi1 : pata_amd
[ 0.972449] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.972452] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.972517] sata_nv 0000:00:08.0: version 3.5
[ 0.972721] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 0.972802] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.973161] scsi2 : sata_nv
[ 0.973470] scsi3 : sata_nv
[ 0.973598] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
[ 0.973602] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
[ 0.973822] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 0.973886] sata_nv 0000:00:08.1: setting latency timer to 64
[ 0.974209] scsi4 : sata_nv
[ 0.974369] scsi5 : sata_nv
[ 0.974488] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
[ 0.974491] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
[ 1.130346] ata1.00: ATAPI: HL-DT-ST DVDRAM_GSA-H40N, RA00, max UDMA/66
[ 1.130357] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
[ 1.143604] ata1.00: configured for UDMA/66
[ 1.149515] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM_GSA-H40N RA00 PQ: 0 ANSI: 5
[ 1.149876] ata2: port disabled--ignoring
[ 1.297028] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.297032] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.633688] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.643352] firewire_ohci 0000:01:09.0: failed to read phy reg
[ 1.643576] firewire_ohci: probe of 0000:01:09.0 failed with error -16
[ 1.730033] usb 1-4: new low-speed USB device number 2 using ohci_hcd
[ 1.936808] usbcore: registered new interface driver usbhid
[ 1.936814] usbhid: USB HID core driver
[ 2.100049] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.107021] ata6.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133
[ 2.107025] ata6.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.120325] ata6.00: configured for UDMA/133
[ 2.120524] scsi 5:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 2.125055] sd 5:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
[ 2.125119] sd 5:0:0:0: [sda] Write Protect is off
[ 2.125123] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.125149] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.131113] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.131120] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.131457] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.146217] sda: sda1 sda2 sda3
[ 2.146831] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.206694] usb 1-8: new full-speed USB device number 3 using ohci_hcd
[ 2.407819] Initializing USB Mass Storage driver...
[ 2.408184] scsi6 : usb-storage 1-8:1.0
[ 2.408335] usbcore: registered new interface driver usb-storage
[ 2.408337] USB Mass Storage support registered.
[ 2.542664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.014632] systemd[1]: Smack is not enabled in the kernel, not loading access rules.
[ 3.097131] systemd[1]: systemd 198 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.097800] systemd[1]: Set hostname to <acer-aspire>.
[ 3.352860] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.352959] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.352983] systemd[1]: Expecting device sys-subsystem-net-devices-enp3s0.device...
[ 3.353005] systemd[1]: Starting Remote File Systems.
[ 3.353024] systemd[1]: Reached target Remote File Systems.
[ 3.353041] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.353091] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.353108] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.353156] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.353173] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.353206] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.353222] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.353253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.353274] systemd[1]: Starting Journal Socket.
[ 3.353366] systemd[1]: Listening on Journal Socket.
[ 3.354821] systemd[1]: Starting Apply Kernel Variables...
[ 3.357143] systemd[1]: Mounting Huge Pages File System...
[ 3.363518] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.370154] systemd[1]: Mounting Debug File System...
[ 3.385832] systemd[1]: Starting Journal Service...
[ 3.393610] systemd[1]: Started Journal Service.
[ 3.393800] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.393975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.407359] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.407389] systemd[1]: Starting Encrypted Volumes.
[ 3.407409] systemd[1]: Reached target Encrypted Volumes.
[ 3.407431] systemd[1]: Starting Setup Virtual Console...
[ 3.410492] systemd[1]: Starting udev Kernel Socket.
[ 3.410553] systemd[1]: Listening on udev Kernel Socket.
[ 3.410641] systemd[1]: Starting udev Control Socket.
[ 3.410689] systemd[1]: Listening on udev Control Socket.
[ 3.410760] systemd[1]: Starting udev Coldplug all Devices...
[ 3.417037] systemd[1]: Starting udev Kernel Device Manager...
[ 3.418761] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.436758] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.441505] systemd[1]: Started Load Kernel Modules.
[ 3.441546] systemd[1]: Mounted FUSE Control File System.
[ 3.441570] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.441652] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.441693] systemd[1]: Mounting Configuration File System...
[ 3.465751] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.476732] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.505747] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.516728] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 3.549724] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 3.553823] systemd[1]: Expecting device dev-disk-by\x2duuid-bb5a3cc3\x2d55fd\x2d4830\x2d8177\x2ddd32df9bd303.device...
[ 3.553856] systemd[1]: Mounting Temporary Directory...
[ 3.571730] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 3.744908] systemd-udevd[126]: starting version 198
[ 3.777101] systemd[1]: Started File System Check on Root Device.
[ 3.777142] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.790819] systemd[1]: Started udev Kernel Device Manager.
[ 3.800185] systemd[1]: Started Apply Kernel Variables.
[ 4.118718] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 4.205364] systemd-journald[122]: Received SIGUSR1
[ 5.423026] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.423033] ACPI: Thermal Zone [THRM] (40 C)
[ 5.463049] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 5.484558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 5.484570] ACPI: Power Button [PWRB]
[ 5.484693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.484697] ACPI: Power Button [PWRF]
[ 5.491085] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 5.542488] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 5.542524] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[ 5.547898] Linux agpgart interface v0.103
[ 5.558914] ACPI: Fan [FAN] (on)
[ 5.559089] [drm] Initialized drm 1.1.0 20060810
[ 5.565468] microcode: AMD CPU family 0xf not supported
[ 5.567533] microcode: AMD CPU family 0xf not supported
[ 5.642735] wmi: Mapper loaded
[ 5.645076] kvm: Nested Virtualization enabled
[ 5.649689] powernow-k8: fid 0xb (1900 MHz), vid 0xc
[ 5.649696] powernow-k8: fid 0xa (1800 MHz), vid 0xd
[ 5.649699] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 5.649987] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
[ 5.685561] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[ 5.685568] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 5.685594] Console: switching to colour dummy device 80x25
[ 5.685773] nouveau 0000:00:0d.0: setting latency timer to 64
[ 5.686326] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[ 5.686707] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
[ 5.686715] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
[ 5.686722] nouveau [ DEVICE][0000:00:0d.0] Family : NV40
[ 5.687642] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
[ 5.733281] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
[ 5.733287] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
[ 5.733560] nouveau [ VBIOS][0000:00:0d.0] BIT signature found
[ 5.733565] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.25.04
[ 5.733746] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
[ 5.733749] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB
[ 5.733752] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
[ 5.761373] [TTM] Zone kernel: Available graphics memory: 443504 kiB
[ 5.761379] [TTM] Zone highmem: Available graphics memory: 709716 kiB
[ 5.761381] [TTM] Initializing pool allocator
[ 5.761831] nouveau [ DRM] VRAM: 125 MiB
[ 5.761838] nouveau [ DRM] GART: 512 MiB
[ 5.761844] nouveau [ DRM] BIT BIOS found
[ 5.761848] nouveau [ DRM] Bios version 05.61.32.25
[ 5.761852] nouveau [ DRM] TMDS table version 1.1
[ 5.761855] nouveau [ DRM] DCB version 3.0
[ 5.761859] nouveau [ DRM] DCB outp 00: 01000310 00000023
[ 5.761863] nouveau [ DRM] DCB outp 01: 00110204 98830003
[ 5.761865] nouveau [ DRM] DCB conn 00: 0000
[ 5.761869] nouveau [ DRM] DCB conn 01: 1131
[ 5.761872] nouveau [ DRM] DCB conn 02: 0110
[ 5.761875] nouveau [ DRM] DCB conn 03: 0111
[ 5.761877] nouveau [ DRM] DCB conn 04: 0113
[ 5.762420] nouveau W[ DRM] DCB type 4 not known
[ 5.762425] nouveau W[ DRM] Unknown-1 has no encoders, removing
[ 5.763281] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.763283] [drm] No driver support for vblank timestamp query.
[ 5.763931] nouveau [ DRM] 1 available performance level(s)
[ 5.763937] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
[ 5.763939] nouveau [ DRM] c:
[ 5.765435] nouveau [ DRM] MM: using M2MF for buffer copies
[ 5.811870] sky2: driver version 1.30
[ 5.812122] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 5.812188] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
[ 5.812268] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
[ 5.812560] sky2 0000:03:00.0 eth0: addr 00:19:21:28:95:2d
[ 5.814804] composite sync not supported
[ 5.815267] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo f63fa000
[ 5.815425] fbcon: nouveaufb (fb0) is primary device
[ 5.829143] IT8726 SuperIO detected.
[ 5.829405] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.829453] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.856121] ppdev: user-space parallel port driver
[ 5.877128] Console: switching to colour frame buffer device 180x56
[ 5.878923] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[ 5.878929] nouveau 0000:00:0d.0: registered panic notifier
[ 5.878952] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
[ 5.879707] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 5.879730] hda_intel: Disabling MSI
[ 5.879786] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[ 6.023710] systemd-udevd[151]: renamed network interface eth0 to enp3s0
[ 6.497697] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input4
[ 6.498447] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[ 6.533068] Adding 997756k swap on /dev/sda3. Priority:-1 extents:1 across:997756k
[ 6.633135] sky2 0000:03:00.0 enp3s0: enabling interface
[ 6.633209] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.846889] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 7.603865] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[ 7.604089] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[ 7.604265] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[ 7.604442] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[ 7.604616] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[ 7.604791] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[ 7.604969] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[ 7.605141] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
[ 8.208529] composite sync not supported
[ 8.244451] composite sync not supported
[ 8.450333] sky2 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex, flow control both
[ 8.450367] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 20.811802] composite sync not supported
[ 23.142014] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
[ 84.047784] usb 1-4: USB disconnect, device number 2
[ 85.606696] usb 1-4: new low-speed USB device number 4 using ohci_hcd
[ 85.814008] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input14
[ 85.814445] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[ 389.250323] composite sync not supported
Xorg log:
[ 7.949]
X.Org X Server 1.14.0
Release Date: 2013-03-05
[ 7.949] X Protocol Version 11, Revision 0
[ 7.949] Build Operating System: Linux 3.8.2-1-ARCH i686
[ 7.949] Current Operating System: Linux acer-aspire 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
[ 7.949] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
[ 7.949] Build Date: 09 March 2013 11:46:22AM
[ 7.949]
[ 7.949] Current version of pixman: 0.28.2
[ 7.949] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.949] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.949] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 21 15:06:46 2013
[ 7.988] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 8.001] (==) No Layout section. Using the first Screen section.
[ 8.001] (==) No screen section available. Using defaults.
[ 8.001] (**) |-->Screen "Default Screen Section" (0)
[ 8.001] (**) | |-->Monitor "<default monitor>"
[ 8.011] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.011] (==) Automatically adding devices
[ 8.011] (==) Automatically enabling devices
[ 8.011] (==) Automatically adding GPU devices
[ 8.060] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.060] Entry deleted from font path.
[ 8.060] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 8.060] Entry deleted from font path.
[ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 8.060] Entry deleted from font path.
[ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 8.060] Entry deleted from font path.
[ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 8.060] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 8.060] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.060] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.069] (II) Loader magic: 0x825b620
[ 8.069] (II) Module ABI versions:
[ 8.069] X.Org ANSI C Emulation: 0.4
[ 8.069] X.Org Video Driver: 14.1
[ 8.069] X.Org XInput driver : 19.1
[ 8.069] X.Org Server Extension : 7.0
[ 8.069] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 8.072] (--) PCI:*(0:0:13:0) 10de:03d0:1019:2601 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 8.073] Initializing built-in extension Generic Event Extension
[ 8.073] Initializing built-in extension SHAPE
[ 8.073] Initializing built-in extension MIT-SHM
[ 8.073] Initializing built-in extension XInputExtension
[ 8.073] Initializing built-in extension XTEST
[ 8.073] Initializing built-in extension BIG-REQUESTS
[ 8.073] Initializing built-in extension SYNC
[ 8.073] Initializing built-in extension XKEYBOARD
[ 8.073] Initializing built-in extension XC-MISC
[ 8.073] Initializing built-in extension SECURITY
[ 8.073] Initializing built-in extension XINERAMA
[ 8.073] Initializing built-in extension XFIXES
[ 8.073] Initializing built-in extension RENDER
[ 8.073] Initializing built-in extension RANDR
[ 8.073] Initializing built-in extension COMPOSITE
[ 8.073] Initializing built-in extension DAMAGE
[ 8.073] Initializing built-in extension MIT-SCREEN-SAVER
[ 8.073] Initializing built-in extension DOUBLE-BUFFER
[ 8.073] Initializing built-in extension RECORD
[ 8.073] Initializing built-in extension DPMS
[ 8.073] Initializing built-in extension X-Resource
[ 8.073] Initializing built-in extension XVideo
[ 8.073] Initializing built-in extension XVideo-MotionCompensation
[ 8.073] Initializing built-in extension XFree86-VidModeExtension
[ 8.073] Initializing built-in extension XFree86-DGA
[ 8.073] Initializing built-in extension XFree86-DRI
[ 8.073] Initializing built-in extension DRI2
[ 8.073] (II) LoadModule: "glx"
[ 8.099] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.133] (II) Module glx: vendor="X.Org Foundation"
[ 8.133] compiled for 1.14.0, module version = 1.0.0
[ 8.133] ABI class: X.Org Server Extension, version 7.0
[ 8.133] (==) AIGLX enabled
[ 8.134] Loading extension GLX
[ 8.134] (==) Matched nouveau as autoconfigured driver 0
[ 8.134] (==) Matched nvidia as autoconfigured driver 1
[ 8.134] (==) Matched nv as autoconfigured driver 2
[ 8.134] (==) Matched nouveau as autoconfigured driver 3
[ 8.134] (==) Matched nvidia as autoconfigured driver 4
[ 8.134] (==) Matched nv as autoconfigured driver 5
[ 8.134] (==) Matched vesa as autoconfigured driver 6
[ 8.134] (==) Matched modesetting as autoconfigured driver 7
[ 8.134] (==) Matched fbdev as autoconfigured driver 8
[ 8.134] (==) Assigned the driver to the xf86ConfigLayout
[ 8.134] (II) LoadModule: "nouveau"
[ 8.134] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 8.154] (II) Module nouveau: vendor="X.Org Foundation"
[ 8.154] compiled for 1.14.0, module version = 1.0.6
[ 8.154] Module class: X.Org Video Driver
[ 8.154] ABI class: X.Org Video Driver, version 14.1
[ 8.154] (II) LoadModule: "nvidia"
[ 8.155] (WW) Warning, couldn't open module nvidia
[ 8.155] (II) UnloadModule: "nvidia"
[ 8.155] (II) Unloading nvidia
[ 8.155] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 8.155] (II) LoadModule: "nv"
[ 8.155] (WW) Warning, couldn't open module nv
[ 8.155] (II) UnloadModule: "nv"
[ 8.155] (II) Unloading nv
[ 8.155] (EE) Failed to load module "nv" (module does not exist, 0)
[ 8.155] (II) LoadModule: "vesa"
[ 8.156] (WW) Warning, couldn't open module vesa
[ 8.156] (II) UnloadModule: "vesa"
[ 8.156] (II) Unloading vesa
[ 8.156] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 8.156] (II) LoadModule: "modesetting"
[ 8.156] (WW) Warning, couldn't open module modesetting
[ 8.156] (II) UnloadModule: "modesetting"
[ 8.156] (II) Unloading modesetting
[ 8.157] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 8.157] (II) LoadModule: "fbdev"
[ 8.157] (WW) Warning, couldn't open module fbdev
[ 8.157] (II) UnloadModule: "fbdev"
[ 8.157] (II) Unloading fbdev
[ 8.157] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 8.157] (II) NOUVEAU driver
[ 8.157] (II) NOUVEAU driver for NVIDIA chipset families :
[ 8.157] RIVA TNT (NV04)
[ 8.157] RIVA TNT2 (NV05)
[ 8.157] GeForce 256 (NV10)
[ 8.157] GeForce 2 (NV11, NV15)
[ 8.157] GeForce 4MX (NV17, NV18)
[ 8.157] GeForce 3 (NV20)
[ 8.158] GeForce 4Ti (NV25, NV28)
[ 8.158] GeForce FX (NV3x)
[ 8.158] GeForce 6 (NV4x)
[ 8.158] GeForce 7 (G7x)
[ 8.158] GeForce 8 (G8x)
[ 8.158] GeForce GTX 200 (NVA0)
[ 8.158] GeForce GTX 400 (NVC0)
[ 8.158] (++) using VT number 7
[ 8.175] (II) [drm] nouveau interface version: 1.1.0
[ 8.175] (II) Loading sub module "dri"
[ 8.175] (II) LoadModule: "dri"
[ 8.175] (II) Module "dri" already built-in
[ 8.175] (II) NOUVEAU(0): Loaded DRI module
[ 8.175] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
[ 8.175] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.175] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 8.175] (==) NOUVEAU(0): RGB weight 888
[ 8.175] (==) NOUVEAU(0): Default visual is TrueColor
[ 8.175] (==) NOUVEAU(0): Using HW cursor
[ 8.175] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 8.175] (==) NOUVEAU(0): Page flipping enabled
[ 8.175] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 8.208] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 8.244] (II) NOUVEAU(0): EDID for output VGA-1
[ 8.244] (II) NOUVEAU(0): Manufacturer: ACR Model: ada8 Serial#: 1937803344
[ 8.244] (II) NOUVEAU(0): Year: 2007 Week: 38
[ 8.244] (II) NOUVEAU(0): EDID Version: 1.3
[ 8.244] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 8.244] (II) NOUVEAU(0): Sync: Separate Composite
[ 8.244] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 8.245] (II) NOUVEAU(0): Gamma: 2.20
[ 8.245] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 8.245] (II) NOUVEAU(0): Default color space is primary color space
[ 8.245] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 8.245] (II) NOUVEAU(0): redX: 0.590 redY: 0.349 greenX: 0.328 greenY: 0.547
[ 8.245] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.138 whiteX: 0.313 whiteY: 0.329
[ 8.245] (II) NOUVEAU(0): Supported established timings:
[ 8.245] (II) NOUVEAU(0): 720x400@70Hz
[ 8.245] (II) NOUVEAU(0): 640x480@60Hz
[ 8.245] (II) NOUVEAU(0): 640x480@67Hz
[ 8.245] (II) NOUVEAU(0): 640x480@72Hz
[ 8.245] (II) NOUVEAU(0): 640x480@75Hz
[ 8.245] (II) NOUVEAU(0): 800x600@56Hz
[ 8.245] (II) NOUVEAU(0): 800x600@60Hz
[ 8.245] (II) NOUVEAU(0): 800x600@72Hz
[ 8.245] (II) NOUVEAU(0): 800x600@75Hz
[ 8.245] (II) NOUVEAU(0): 832x624@75Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@60Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@70Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@75Hz
[ 8.245] (II) NOUVEAU(0): 1152x864@75Hz
[ 8.245] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 8.245] (II) NOUVEAU(0): Supported standard timings:
[ 8.245] (II) NOUVEAU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 8.245] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 75 vid: 3969
[ 8.245] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 8.245] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 8.245] (II) NOUVEAU(0): Supported detailed timing:
[ 8.245] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 367 x 229 mm
[ 8.245] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 8.245] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 8.245] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 215 MHz
[ 8.245] (II) NOUVEAU(0): Monitor name: Acer AL1716W
[ 8.245] (II) NOUVEAU(0): Serial No: LA8040344303
[ 8.245] (II) NOUVEAU(0): EDID (in hex):
[ 8.245] (II) NOUVEAU(0): 00ffffffffffff000472a8ad50888073
[ 8.245] (II) NOUVEAU(0): 261101036c251778ee10d59759548c27
[ 8.246] (II) NOUVEAU(0): 235054bfee8081c0810f9500950f0101
[ 8.246] (II) NOUVEAU(0): 0101010101019a29a0d0518422305098
[ 8.246] (II) NOUVEAU(0): 36006fe510000006000000fd00384c1f
[ 8.246] (II) NOUVEAU(0): 5315000a202020202020000000fc0041
[ 8.246] (II) NOUVEAU(0): 63657220414c31373136570a000000ff
[ 8.246] (II) NOUVEAU(0): 004c41383034303334343330330a00aa
[ 8.246] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz eP)
[ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'
[ 30.761] (II) UnloadModule: "nv"
[ 30.761] (II) Unloading nv
[ 30.761] (--) Depth 24 pixmap format is 32 bpp
[ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.777] (II) EXA(0): Driver registered support for the following operations:
[ 30.777] (II) Solid
[ 30.777] (II) Copy
[ 30.777] (II) Composite (RENDER acceleration)
[ 30.777] (II) UploadToScreen
[ 30.777] (II) DownloadFromScreen
[ 30.777] (==) NOUVEAU(0): Backing store disabled
[ 30.777] (==) NOUVEAU(0): Silken mouse enabled
with 'nouveau.noaccel=1'
[ 1191.621] (II) UnloadModule: "nv"
[ 1191.621] (II) Unloading nv
[ 1191.621] (--) Depth 24 pixmap format is 32 bpp
[ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 1191.621] (==) NOUVEAU(0): Backing store disabled
[ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
[ 1191.621] (==) NOUVEAU(0): DPMS enabled
So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
Last edited by berbae (2013-03-27 10:07:42) -
P67a-GD65 System Freezes and Recovers During 3D gaming and Online Video
The Problem:
Temporary system freeze with audio stutter. The system recovers 30sec - 2min later.
Key presses made during freeze will execute after system recovers (ctrl+alt+delete for example)
Usually, but not always, I see an error message in the system tray and I do NOT experience bsod.
This happens seemingly at random from 3D accelerated applications, and web browsing. Games such as BF3 (moderate), WoW (seldom), Planetside 2 (frequently), Minecraft (seldom), Hawken (seldom), etc.
Also happens frequently in both Internet Explorer 9/10, Firefox, Chrome, and Steam store browser. Typically when watching steaming video (youtube, HULU, flow player, etc)
but Pandora audio streaming also seems to create the conditions where this happens.
Error Message:
"Display driver stopped responding and has recovered
Display driver NVIDIA Windows Kernal Mode Driver 314.07 stopped
responding and has successfully recovered"
The problem also shows up in the Windows reliability history with the following data:
Source
Windows
Summary
Video hardware error
Date
3/6/2013 9:11 PM
Status
Not reported
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name: LiveKernelEvent
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Files that help describe the problem
WD-20130306-2010.dmp
sysdata.xml
WERInternalMetadata.xml
Extra information about the problem
BCCode: 117
BCP1: FFFFFA8011E0C4E0
BCP2: FFFFF8800654A198
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
My System Hardware:
CPU: Intel i7 2600k @ 4.5ghz
Motherboard: MSI p67a-gd65 (B3 stepping)
Memory: G.SKILL Sniper 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
GPU: Originally MSI 6950 2GB. Replaced with EVGA 670 FTW 2GB.
PSU: CORSAIR HX Series HX850 850W
HDD: 3x Western Digital WD RE4 WD5003ABYX 500GB in Raid 0
OS: Windows 7 Home Premium SP1 with all updates
Case/Cooling: Silverstone Raven 2E with Thermalright silver arrow cpu heatsink
What I've tried:
Updated all motherboard drivers and bios (4.3) to current versions (no improvement)
Updated display drivers (in safe mode with driver sweeper. No improvement)
Updated Realtek Audio drivers for onboard sound (no improvement)
Updated Intel Rapid Storage drivers (no improvment)
Cleared CMOS and tested system at default settings with no overlock (no improvement)
Flashed 6950 back to 6950 stock bios and removed overclock (no improvement)
Replaced old 6950 with new GTX 670 (problem still occurs in the same exact way)
Tried GPU in 2nd PCIe slot. No improvement.
Checked GPU Temps. GTX 670 fan profile in EVGA Precision X set to keep temp below 70 degrees Celcius. Card maxes at 60 degrees under heavy gaming load.
Complete reformat of raid array with fresh install of Windows (4 different times) Seemed to help for a few days, then freezes came back
Ran OCCT and Prime 95 Torture tests separately for a few hours at stock and OC settings. System stable with core temps of high 50's overclocked, and low 40's stock.
Ran Memtest86 for 10 hours with zero errors.
Used digital multimeter to test 12v rail on PSU. Noted solid 12v reported. Didn't test other rails.
Unplugged PSU cables from motherboard and reattached firmly
Ran HD Tune and Data Life Guard Tools for error checking on hard disks. Zero errors found.
Disabled Windows Aero (no improvement)
Updated Adobe Flash Player to latest setting (no improvement)
Removed Adobe Flash Player (no improvement)
Turned off Adobe Flash hardware acceleration (no improvement)
*EDIT: Forgot that I also adjusted Nvidia driver profiles for apps that have frozen to include power preference to max performance
All of my hardware with the exception of the new 670 was purchased and configured back in February of 2011. This problem first occured in BF3 multiplayer sometime in early 2012,
and has gradually been happening more frequently. Web searches found many individuals with this error, but the solutions are all over the map, and I've tried just about everything that I've found.
I think I've narrowed the problem down to the motherboard, but I just can't find a clear answer or solution. Maybe it's the raid array? I really thought replacing the GPU would solve my trouble here
and I was...NOT happy when it happened again with the new 670 that I scored for $250 after amazon gift cards. I typically get kicked/disconnected during online game play when this happens and I'm ready to be done with it. I was hoping to fix the issue without needing to buy new hardware, but I don't see any other way at this point.
My patience runs thin. Please help!Quote from: Froggy Gremlin on 11-March-13, 15:28:36
Might want to ask for the special archive to return the mainboard to pre-Ivy support UEFI/BIOS and then test again with everything set to auto/stock/default.
Already tested that before updating to 4.3. I started having the problem on 1.8, then 1.J0, then 4.3.
Quote from: Bernhard on 11-March-13, 15:30:29
Just a shot in the dark.
The length of time that your CPU has been running at the OC could have accelerated the eventual degradation.
Have you tested your CPU in another board or do you have access to a "known good" CPU to test in your system ?
I do not have another 1155 lga board to test the cpu in unfortunately, hence the CPU stress testing. Based upon previous experiences with multiple overclocked systems that I've run at much more aggressive overclocks, I don't believe I'm seeing a processor failure, though I can't rule out the possibility.
Quote from: xmad on 11-March-13, 23:26:01
Quite a few components can cause this.
Do you have a friend that could lend you a psu to test? A weak of failing PSU can often be the cause of something like this?
No I don't have another PSU to test. I did use a digital multimeter to test the 12v rail, as well as the motherboard contacts for testing voltage to the cpu and system They were all right in line with what I'm seeing reported in the bios. I did not test these contacts while the system was under load however, so I may need to do it again. -
Unavoidable system freezes when playing games
Hi all,
I recently switched from Windows to Arch Linux for good and it's been an enjoyable experience so far. My only problem is system freezes that sometimes occur when putting load on the system.
Mostly I'm having the problem that games I'm playing will inevitably freeze at some point, might be 5 minutes after launching them, might be 2h. It isn't exclusive to games though, once or twice Chrome crashed when having a couple of tabs open and opening another YouTube tab or something like that.
Here's how it happens:
- My frame rate (in games) drops over a couple of seconds until I only see a slide show, then it's only a matter of seconds until the system (X?) freezes completely.
- simultaneously the sound begins to stutter and stops as well
- if I see it coming and manage to Alt+F4 out of the game it goes back to running normally, otherwise it freezes completely and my only option is to reboot or Alt+SysRq+R, Alt+SysRq+E which brings me back to my login manager.
About my system:
- latest Arch, upgraded a couple of times which didn't change anything
- Intel i5 CPU, Nvidia GPU with proprietary drivers
- Openbox as WM, no DE, but I had the same problem with GNOME and KDE before as well
Games I played on this system (and all crashed):
- CS:GO, Prison Architect, WoW on Wine
If someone could give me any hints how I could go about diagnosing/removing this problem I would be very grateful!
P.S. I didn't have any problems like this at all on Windows (7)Dec 04 18:48:39 archie dbus[239]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.NetworkManager.service': Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory.
Dec 04 19:08:33 archie kernel: SysRq : Keyboard mode set to system default
Dec 04 19:08:36 archie kernel: SysRq : Terminate All Tasks
Dec 04 19:08:36 archie systemd-journal[155]: Journal stopped
Dec 04 19:08:36 archie systemd-journal[9737]: Permanent journal is using 232.0M (max allowed 4.0G, trying to leave 4.0G free of 63.2G available → current limit 4.0G).
Dec 04 19:08:36 archie systemd-journald[155]: Received SIGTERM.
Dec 04 19:08:36 archie systemd-journal[9737]: Journal started
Dec 04 19:08:36 archie dhcpcd[299]: received signal TERM from PID 0, stopping
Dec 04 19:08:36 archie dhcpcd[299]: enp2s0: removing interface
Dec 04 19:08:36 archie dhcpcd[299]: exited
Dec 04 19:08:36 archie lightdm[5302]: pam_unix(lightdm:session): session closed for user ricardo
Dec 04 19:08:36 archie dhcpcd[9725]: dhcpcd not running
Dec 04 19:08:36 archie lightdm[5302]: pam_systemd(lightdm:session): Failed to release session: Connection reset by peer
Dec 04 19:08:36 archie pulseaudio[5357]: Unable to read or parse data from client.
Dec 04 19:08:36 archie pulseaudio[5357]: PulseAudio information vanished from X11!
Dec 04 19:08:36 archie systemd[272]: Stopping Default.
Dec 04 19:08:36 archie systemd[5316]: Stopping Default.
Dec 04 19:08:36 archie systemd[272]: Stopped target Default.
Dec 04 19:08:36 archie systemd[5316]: Stopped target Default.
Dec 04 19:08:36 archie systemd[272]: Stopping Basic System.
Dec 04 19:08:36 archie systemd[5316]: Stopping Basic System.
Dec 04 19:08:36 archie systemd[272]: Stopped target Basic System.
Thanks for the hint, didn't know the journal yet. Just had another crash. The journal unfortunately doesn't seem to show anything fruitful concerning the crash. (which occured between the first two entries) -
Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
== URL of affected sites ==
http://http://www.facebook.com (always) and www.YouTube.com (sometimes)There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
Brianeng
Maybe you are looking for
-
ITunes Won't Open on a Windows Machine
Just as some background information: I first got my iPod for Christmas in 2004. I upgraded my computer to Windows 2000, installed service pack 4, and installed and ran iTunes without incident. After each subsequent upgrade, I've been able to run the
-
How to calculate start date and last date for current week
Dear All. i want to calculate the start of the current week as well as the last date of the current week, our week start from Saturday and ends of Friday i.e. Saturday is the first day of the week and Friday is the last day of the week. How can i ach
-
Custom Table Editor: values are not populated to the model
H, I wrote a custom table renderer which uses JComboBox + editor, which seem to work (after editing, the displayed cell reflects the change) but after editing the table manually, the model is not altered when i call table.getModel(); The editor part
-
Hi, does someone know how to set the horizontal alignment of a cell ??? Thanks, Fred.
-
Hello Can any one help me to read XML document in JAVA Thank u