Kinda off subject w/regards to CC - Fidelity Cash Management Account

I know alot of people here have Fidelity Amex's and thus have Fidelity Cash Management Accounts as well aka a checking account.. With that being said, has anyone ever paid a credit card bill being insert the routing/checking account # from their fidelity Cash Management Account into the CC website such as Cap1/BofA/Amex as a checking account and have a successful withdraw from it?  I was going to set it up ot pay an Amex bill rather than my primary checking account, but last thing I would want it to do is not to work and get rejected due to not truely being a checking account.  Anyone have experience with setting one up on a CC companies website as a checking account and paying successfully?  Just don't want to be a guniea pig here and have it fail lol.. Granted I can transfer money from Fid Cash Management account to my primary banking account, but just curious on other peoples experience. Appologize if bad place to place this, mods feel free to move.  

Creditaddict wrote:
CreditCuriousity wrote:
I know alot of people here have Fidelity Amex's and thus have Fidelity Cash Management Accounts as well aka a checking account.. With that being said, has anyone ever paid a credit card bill being insert the routing/checking account # from their fidelity Cash Management Account into the CC website such as Cap1/BofA/Amex as a checking account and have a successful withdraw from it?  I was going to set it up ot pay an Amex bill rather than my primary checking account, but last thing I would want it to do is not to work and get rejected due to not truely being a checking account.  Anyone have experience with setting one up on a CC companies website as a checking account and paying successfully?  Just don't want to be a guniea pig here and have it fail lol.. Granted I can transfer money from Fid Cash Management account to my primary banking account, but just curious on other peoples experience. Appologize if bad place to place this, mods feel free to move.  it has checks and bill pay on it's wesbsite so i can't see why there would be any issue and you could test it by doing it through their bill pay and push the payment instead of through amex and pull payment.Ya I could push a payment, but honestly kinda like pull payments better.. I wouldn't think it would be an issue either, but just curious with other peoples experiences if they have used it as a checking account and it truely worked.  I would think it would as I have checks from them.

Similar Messages

  • HT201317 dear, i have a question please.  if i want to keep a folder of pictures in my icloud account; then delete this folder off my phone would it be deleted from icloud account too?? cause im running out of memory on my iphone

    dear, i have a question please.  if i want to keep a folder of pictures in my icloud account; then delete this folder off my phone would it be deleted from icloud account too?? cause im running out of memory on my iphone
    thanks

    You can't use icloud to store photos.  There's a service called photo stream which is used to sync photos from one device to another, but this can't be used to store photos permanently.
    Always sync photos from a device to your computer,  Then you can delete them from the device.
    Read this...  import photos to your computer...
    http://support.apple.com/kb/HT4083

  • HT4061 My IMEI 01 295800 500762 5 My Apple ID is going back to old one and will not let me sign in to my iCloud account or my old my old either unable to update or purchase apps. you have sent me steps to ake off devices but my manage account page does no

    My old iTunes account is now showing up when I try to update Apps or purchase. Not able to sign in at all. Notified you of the problem and was sen steps to take off other devices but from my manage account setting I do not hae the option. My old account is [email protected] please help.

    https://discussions.apple.com/message/20931060#20931060

  • Few questions regarding Oracle Scorecard and strategy management.

    Hi,
    I have following questions regarding Oracle Scorecard and strategy management:
    1. What are the ways in which i can show status of a KPI, like we have colors and symbols, what are others?
    2. can we keep log of KPIs, store them, keep report of feedback/action taken on that?
    3. Does Scorecard and strategy management have ability to retain history on feedback and log of
    entries i.e. date/time, user name?
    4. Does Scorecard and strategy management have ability to use common mathematical formulas e.g. median, average, percentiles. Describe.?
    Thanks in advance for your help.

    bump.

  • First photo order from apple cuts off subjects head

    Who is the genius at the Apple developing room who needs to crop a photo so that the subjects head is cut off? Usually when you send a picture into a photo store, they get it right the first time without exercising their creative PHOTOGRAPHER abilities. Why can't the film processors just leave the prints as is when they receive them? Well, I guess I will go elsewhere for my photo orders as the "creative" people there just have to show off their new, exciting film techniques by expanding, editing, cropping, and did I mention that the picture order I did receive looked nothing like what I sent them...UUGGHH!!! Go work at Costco or something...I think that's where I'll try next.

    How do I make sure my prints are not cropped incorrectly during processing?
    Each print size has its own slightly different rectangular shape, known as the aspect ratio. For example, an 8 x 10 print is proportionately taller and narrower than a 4 x 6 print. To make your image fit these different print shapes, photo labs usually enlarge the image slightly and crop out what doesn't fit.
    For the best results, you should crop your images to the same aspect ratio as the print size you are ordering.
    http://www.apple.com/support/photoservices/preparation_tips/
    LN

  • Kinda off topic question about Naps

    Mod... feel free to close this if you feel you have to. I figured I might get a good response asking this here though.
    Anyway, I have a Zen Touch and a napster subscription. I liked the idea of being able to basically sample music (via the subscription) and then buy what I really like. Anyway, yesterday I bought my first album. It was an album that I had already downloaded via the subscription. I was under the impression that buying the album released any protection on it, and thus I would have a bunch of unprotected wma files. But after copying the wma files to another computer, I found this was not the case. I tried playing those files on the computer, and windows media player was still looking for my napster license. I was able to burn the tracks I purchased to a CD, like I'm supposed to be able to after purchasing them. But, is this what I have to do to "keep these tracks forever"? If my subscription runs out, will I not even be able to play the WMA files that I purchased? If that's the case, then this whole thing is disappointing. I was under the impression that by buying the tracks, they would no longer be tied to my napster subscription in any way, and I could create a library of wma tracks that I purchased, which I would be able to play and do whatever I want with after my subscription runs out. If I have to burn all my purchased tracks to CD to keep them forever, then what's the point of buying digital music? I still have to create a clutter of CDs if I want to keep the music. I realize of course that I could just rip the songs off the CDs I burn to have an unprotected file, but that's ridiculous.
    Does iTunes work like this? I.e., if I buy a track, it is still protected in any way?

    All DRM (WMA DRM or Apple Fairplay) stays with purchased tracks forever, UNLESS you burn an audio CD. On that audio CD there is no DRM anymore. You can rip it back into anything. Same thing in Napster, Yahoo, MSN Music, iTunes, etc..
    Here's how Napster works: You put Napster software (or WMP Napster plug-in) on as many computers as you want. No limit. Each track you buy gets a license to play on up to 3 computers. That's all. This license is for each track, not for Napster itself. You can have various tracks on many different computers so long as one track only plays on 3. When you go to, say, computer number two, you "synchronize" your Napster downloads. This puts all the stuff you downloaded or bought on that computer, too. Now you can play your purchased stuff on the second computer. Napster looks at the tracks you need on computer number two and automatically downloads a copy there when you synchronize. You do not need the full Napster software to do any of this--the WMP plug-in will work just as well. Tracks you download only (don't buy) will expire. The license will not allow them to play after you quit Napster. Tracks you buy from Napster have a license that does not expire. I have a whole bunch of these and I left Napster in September. They all play and all download to my Zen players, too. I just burned a few to CD recently, too.
    Message Edited by MikeM32 on -29-2005 0:5 AM

  • My primary room changes in color disappeared..kinda off ???

    I am color correcting a project and all of a sudden all that I did in the primary room has vanished, except for what I did with the color wheels on my table.
    Its like i pressed a key that hides all of the information in the primary room, so I can no longer see the changes I made to the curves or to the color wheels on the sofware, but I can still see the changes that I did using my table.
    Has this happen to anyone? I cant figure out how to get that back, tried going back to a previous archive, turning everything off and on and nothing.

    I am color correcting a project and all of a sudden all that I did in the primary room has vanished, except for what I did with the color wheels on my table.
    Its like i pressed a key that hides all of the information in the primary room, so I can no longer see the changes I made to the curves or to the color wheels on the sofware, but I can still see the changes that I did using my table.
    Has this happen to anyone? I cant figure out how to get that back, tried going back to a previous archive, turning everything off and on and nothing.

  • Nvl question (kind off)

    Hi guys,
    I was wondering if you could help me out please.
    I have a table with a start_date and end_date as well as a temp_start_date and temp_end_date column.
    What I want to do is display the start_date and end_date BUT, if the start_date is null I want to show the temp_start_date and temp_end_date in that column.
    I was thinking I could use nvl or possibly decode to do this?
    The first bit I think is straight forward, I nvl the start_date to the temp_start_date, but im not sure how to proceed from there? I only want to show the temp_end_date if the start_date is null. Any help on this would be greatly appreciated.
    Select nvl(start_date,temp_start_date), end_date
    From my_table
    Thanks

    Hi,
    Use the NVL<b>2</b> function for that
    SELECT     NVL ( start_date
             , temp_start_date
             )          AS s_date
    ,     NVL2 ( start_date
              , end_date
              , temp_end_date
              )             AS e_date
    FROM    table_x
    ;You could use DECODE or CASE to test if start_date is NULL, and, depending on the answer, return either end_date or temp_end_date, but NVL2 was designed specifcally to do that. That is, the NVL2 expression above is equivalent to
    ,     CASE
             WHEN  start_date  IS NOT NULL
             THEN  end_date
             ELSE  temp_end_date
         END             AS e_dateand also
    ,     DECODE ( start_date
                , NULL     , temp_end_date
                           , end_date
                )        AS e_date 
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
    See the forum FAQ {message:id=9360002}

  • Kind off topic, but i have some TERMINAL questions

    I really want to get into terminal, really learn how to use it
    is there any official guides or any good guides taht can get me started and teach me everything or just enough??
    pleae help

    HI,
    Best place to post for help with Terminal is here.
    Get under the hood with Command Line and the Terminal
    O'Reilly's book here is good. http://search.oreilly.com/?q=terminal
    Carolyn

  • I have a ipod touch 1st generation and it started to not to respond in some parts of the screen. Its kind off old it randomly turns off and on. What can i do? is there a way for apple to help me?

    I need help some one please help me

    Basics from the manual are restart, reset, restore.
    If these fail, it is likely a hardware problem.  You can call Apple to see about repair or look it up online:
    http://www.apple.com/support/ipod/service/faq/

  • Cannt communicate with my device (kind off)

    I have a Usb8451 and when I connect it , Measurement and Automotion  shows that it is in there, but when I would like to test it ( i believe its the first Icon when you browse to the device) its shaded and I cannot talk to it. The light on the DAQ is on and sometimes it flickers , but cant seem to properly talk to it. Another thing is how the heck can I set P0.0 on? WHats the difference between a port and a line?
    Thanks in adcance.

    Perhaps you could attach a screenshot of what you are seeing.  I have a USB-8451 (which is an I2C/SPI device, I want to verify that you are using this) on my machine, and I have attached a screenshot of what mine looks like in Measurement & Automation Explorer. 
    Cheers,
    Kelly R.
    Applications Engineer
    National Instruments

  • PR workflow kick off again when CATA -Time transfer was done by Accounting

    Hi,
    PR workflow kick-off again when accounting ran tcode -CATA(Time transfer ).This PR was approved converted into PO .When account ran CATA the workflow kick off again .I deleted the workitem through tcode -SWWL still the PR shows Release Possilble.Any body has faced this kind of issue .I want to delete the Release possible option for this PR
    This PR was created for service order for performimng services.
    Thanks in advance
    Nitin Amritkar

    I whould suggest you to call Apple
    http://support.apple.com/kb/HE57
    Here the Apple Support Communities is only used by normal users as you are. No Apple people to be found here.

  • Regarding color picking and color management - can someone, please test this?

    Please take a few seconds to test this and let me know the result.
    This is with CS5 but probably the same with older versions:
    Create a new document and zoom out so that the canvas is smaller than the window.
    Change the Standard Screen Mode color to Custom and choose some color, for example gray that is 60 for each R,G, and B.
    You can do that in the Interface page of the Preferences or by right clicking on the empty area of the window that is beyond the image's canvas.
    Using the eyedropper tool pick the color of that empty area
    Press Alt + Delete to fill the canvas with that color.
    Do you see a difference between the canvas and that area.
    I see a slight difference when the color management preview is on and no difference when it is off (soft proofing using Monitor RGB)
    I have some ideas but it will be great of someone can make a clear conclusion and explanation for this behavior.

    Thanks for that confirmation, Chris.
    Same thing with my apps, though with effort I suppose the colors for the controls and background COULD be put through the color management system at startup time...  Lots more complexity though, and that would kind of diverge with the concept of theme selection, not to mention potentially uncovering bugs in the control implementations...  And, if the user has gone out of his way to set everything to a pretty shade of blue, and along comes a color-managed dialog that's gone greenish because that's what those color values REALLY mean, that would likely be reported as a bug just because it's different...
    -Noel

  • How do i take photo stream off without other devices using the same apple id account get the picks??

    is there a setting for photo stream so other devices with the same apple id dont recieve the photos

    Go to Settings>iCloul and turn off PhotoStream

  • I upgraded from firefox 3.6 to firefox 4.0 and now I can't get in to my.msn, fidelity, my banck account.how do I go back to 3.6 my bank account, fidelity, my.msn etc

    when I go to my roboform to signin to my fidelity account firefox won't accept the sign in or password

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

Maybe you are looking for