[kinda SOLVED]video-intel KMS problems

Hello everyone.
I did a fresh install and I'd really appreciate some help setting up KMS properly.
So far I'm able to run gnome-shell with all the effects,
but:
1. I only get 1024x768 resolution instead of my native: 1920x1080.
2. console is limited to small area when booting up (even though I did as the wiki suggests)
3. I followed the wiki:(https://wiki.archlinux.org/index.php/Intel) step by step, several times
but nothing I do seems to have any effect!
At last, I decided to stop rebooting and ask for help.
please help me troubleshoot this!
thank you for your time!
p.s.1 here's a similar topic I found
though in my case I don't get weird artifacts
p.s.2. my graphics card is the one built in core i5.
[edit] I just fixed the resolution problem: for some unknown reason, gnome did not have my monitor selected by default
instead it defaulted to an "unknown device" which only supports 800χ600 and 1024χ1768. Weird.
Last edited by twin (2011-11-25 17:28:21)

Are you using a laptop or desktop?
Cause I had a similar problem with a nettop with an Intel Atom procesor; the fix for me was to disable the LVDS in grub to get working my native resolution.

Similar Messages

[SOLVED]Xf86-video-intel 2.7.0-1 problem.

Iḿ using xf86-video-intel with xorg-server 1.6.1 and when i use a kms-enabled kernel my video gets all messed up. It' s like it can't find the correct sync with video.
no kms is ok, but as usual , i get no direct rendering with compiz.
does anyone is experiencing the same problem?
intel gm965 here
Last edited by lycaeum (2009-04-17 10:50:22)

Bogart wrote:
The problem is that tiling was enabled to solve the performance problems with KMS. So disabling it will have the performance problems again.
How does gtkperf run as compared with EXA when using KMS and tiling off? Could anyone test? (I'll test myself later when I have the chance).
Don't know how it compares, but here are the UXA/kms results with tiling off:
GtkPerf 0.40 - Starting testing: Fri Apr 17 12:10:03 2009
GtkEntry - time: 0.00
GtkComboBox - time: 3.09
GtkComboBoxEntry - time: 1.87
GtkSpinButton - time: 0.89
GtkProgressBar - time: 1.03
GtkToggleButton - time: 0.61
GtkCheckButton - time: 0.53
GtkRadioButton - time: 0.71
GtkTextView - Add text - time: 0.91
GtkTextView - Scroll - time: 0.88
GtkDrawingArea - Lines - time: 1.23
GtkDrawingArea - Circles - time: 2.42
GtkDrawingArea - Text - time: 2.37
GtkDrawingArea - Pixbufs - time: 0.27
Total time: 16.84

When i opn the you tube or any kind of video clip in the mozilla firefox the video clip is shaking completely how to solve a problem

when i opn the you tube or any kind of video clip in the mozilla firefox the video clip is shaking completely how to solve a problem

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

[SOLVED] xf86-video-intel (sna) 2.20.9 crashes during xrandr operation

Hello All!
I noticed a kind of serious problem the other day: running
xrandr --output HDMI2 --rotate inverted
will cause a seg fault and crash X. Here's the message that will be left in
your terminal:
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x36) [0x560366]
1: /usr/bin/X (0x400000+0x1640c9) [0x5640c9]
2: /usr/lib/libpthread.so.0 (0x7f545be2e000+0xf170) [0x7f545be3d170]
3: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f5458e05000+0xb5ff2) [0x7f5458ebaff2]
4: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f5458e05000+0xbc92c) [0x7f5458ec192c]
5: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f5458e05000+0x6b0d8) [0x7f5458e700d8]
6: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f5458e05000+0x5cb27) [0x7f5458e61b27]
7: /usr/bin/X (BlockHandler+0x4a) [0x4382da]
8: /usr/bin/X (WaitForSomething+0x114) [0x55d714]
9: /usr/bin/X (0x400000+0x34281) [0x434281]
10: /usr/bin/X (0x400000+0x23615) [0x423615]
11: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f545acda725]
12: /usr/bin/X (0x400000+0x238ed) [0x4238ed]
Segmentation fault at address (nil)
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
This happens to me on a lenovo X220T. I also have a lenovo U350 (not sandy
bridge), and that works fine. Can anyone else confirm this so I can get a bug
report started?
A few notes:
* Reverting to the 2.20.8 driver fixes the issue.
* It doesn't matter which screen I rotate, or if I have externals connected at
all. xrandr seems to always crash.
* My kernel is slightly outdated (3.4.9-1), due to some other X220T issues:
https://bugs.archlinux.org/task/31384
Thanks!
*EDIT*: searching a little harder discovers this bug:
https://bugs.freedesktop.org/show_bug.cgi?id=55602
Which I think is the same thing. I'll try to help them out...
*EDIT2*: Sorry for all the noise! I think this issue is resolved upstream:
https://bugs.freedesktop.org/show_bug.cgi?id=55527
I'll mark this as solved.
Last edited by wes (2012-10-05 21:44:45)

Exact same problem.
Lenovo S12 (Intel Atom)
pacman.log...
[2014-06-15 06:41] [PACMAN] upgraded xf86-video-intel (2.99.911-2 -> 2.99.912-1)
Xorg.0.log...
[ 1472.441] (II) Loading sub module "fb"
[ 1472.441] (II) LoadModule: "fb"
[ 1472.441] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1472.443] (II) Module fb: vendor="X.Org Foundation"
[ 1472.443] compiled for 1.15.1, module version = 1.0.0
[ 1472.443] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1472.443] (II) Loading sub module "dri2"
[ 1472.443] (II) LoadModule: "dri2"
[ 1472.443] (II) Module "dri2" already built-in
[ 1472.443] (II) Loading sub module "dri3"
[ 1472.444] (II) LoadModule: "dri3"
[ 1472.445] (WW) Warning, couldn't open module dri3
[ 1472.445] (II) UnloadModule: "dri3"
[ 1472.445] (II) Unloading dri3
[ 1472.445] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
<--snip-->
[ 1472.513] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1472.513] (II) AIGLX: Loaded and initialized i915
[ 1472.513] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1472.515] (EE)
Fatal server error:
[ 1472.515] (EE) failed to create screen resources(EE)
[ 1472.515] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1472.515] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1472.515] (EE)
[ 1472.515] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1472.539] (EE) Server terminated with error (1). Closing log file.
Edit: Bug filed https://bugs.archlinux.org/task/40860 Monday, 16 June 2014, 22:46 GMT+8
Last edited by keepitsimpleengineer (2014-06-16 14:49:59)

[SOLVED]xf86-video-intel-2.13.0-2 - Black screen/windows

I've upgraded from xf86-video-intel-2.13.0-1 to release 2 and now every GL window is black, with no rendering.
For example, glxgears give-me a black empty window with no rendering, also the games stoped working.
I can confirm this issue on this igp:
(II) intel(0): Integrated Graphics Chipset: Intel(R) Q35
Mesa 7.9
Any more confirmations?
Downgrading to extra/xf86-video-intel solves the problem.
Last edited by TigTex (2010-10-13 23:50:53)

Ok... let's wait for a fix.
Thank you
edit: release -3 solves the problem.
Last edited by TigTex (2010-10-13 22:17:52)

Old problem kinda solved but now I got a CRC problem, begging for help.

I have kinda solved the problem I had in my previous post:
https://forum-en.msi.com/index.php?topic=84615.0
However now I have a new problem. I solved my other problem by moving the memories from the 2 green slots on the mainboard to 1 green and 1 purple. I started the computer and managed to ged rid of the bluescreen and the freezes but not without the cost of a new problem.
My new problem is that I get alot of CRC errors now when installing biggers things ( Like most games for example). Before I switched one of the memory sticks to purple I didnt seem to have these problems since I managed to install a few games ( Painkiller, warcraft 3 FT, battlefield 2 for example) but now with the sticks in green and purple Im having problems installing most games ( Got crc error on painkiller expansion, farcry, cold fear for example. however I got empire earth 2 to get installed).
Ive hard this problem could be cause of an faulty hard disk but Ive used both of the ones I have installed right now in my old computer and they worked perfectly there.
Anyone got any suggestion on what the problem can be?
I would get extremely happy if someone could help me fix this problem.
My system:
Gainward 7800GTX GS 256mb
AMD 64 3200+ 90nm venice
2X TwinMos Speed premium 3200 512mb cl2.5 winbond BH-5
MSI K8N Neo4 Platinum nForce4 Ultra
CD-RW
Tagan TG420-U02 i-Xeye PSU420W
+3.3V 28A
+5V 42A
+12V 22A

Quote from: Cane on 04-August-05, 12:09:22
However now I have a new problem. I solved my other problem by moving the memories from the 2 green slots on the mainboard to 1 green and 1 purple. I started the computer and managed to ged rid of the bluescreen and the freezes but not without the cost of a new problem.
My new problem is that I get alot of CRC errors now when installing biggers things ( Like most games for example). Before I switched one of the memory sticks to purple I didnt seem to have these problems since I managed to install a few games ( Painkiller, warcraft 3 FT, battlefield 2 for example) but now with the sticks in green and purple Im having problems installing most games ( Got crc error on painkiller expansion, farcry, cold fear for example. however I got empire earth 2 to get installed).
Ive hard this problem could be cause of an faulty hard disk but Ive used both of the ones I have installed right now in my old computer and they worked perfectly there.
Anyone got any suggestion on what the problem can be?
I would get extremely happy if someone could help me fix this problem.
My system:
Gainward 7800GTX GS 256mb
AMD 64 3200+ 90nm venice
2X TwinMos Speed premium 3200 512mb cl2.5 winbond BH-5
MSI K8N Neo4 Platinum nForce4 Ultra
CD-RW
Tagan TG420-U02 i-Xeye PSU420W
+3.3V 28A
+5V 42A
+12V 22A
What hard drive do you have? Can you put these specifics in your sig. Anyway, when games freeze after 20 minutes its either not enough juice from the power supply...(I have a tagan but its a 480w u22 with 12v@30a) OR, its high temps. What are your temps?
Second, do you have "matched pair" of ram or did you buy them separately.
EDIT: What are your drivers for the video card too, are you using the latest ones from nvidia?
Quote from: TexasRudy on 05-August-05, 00:33:21
The manual does state to fill up the green slots before using the purple slots. I've noticed the memory dimms are fickle as well. I was having issues with the memory slots.
Put the memory in slots 1 and 3 first and see what happens.
TR, you will miss the benefit of dual channel, I made this same mistake but it is talked about greatly on this forum. If you have matched pairs, then either slots 1&2 or 3&4 are the best combinations for dual channel. Just my 2 cents.

Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3

I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
There are no error messages and glxinfo say that 3D is indeed enabled.
Xorg log file:
[ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
[ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[ 358.900]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 358.900] X Protocol Version 11, Revision 0
[ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
[ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
[ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
[ 358.900] Build Date: 01 November 2010 10:23:07PM
[ 358.900]
[ 358.900] Current version of pixman: 0.18.4
[ 358.900] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
[ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
[ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 358.901] (==) ServerLayout "X.org Configured"
[ 358.901] (**) |-->Screen "Screen0" (0)
[ 358.901] (**) | |-->Monitor "Monitor0"
[ 358.901] (**) | |-->Device "Card0"
[ 358.901] (**) |-->Input Device "Mouse0"
[ 358.901] (**) |-->Input Device "touchpad"
[ 358.901] (**) |-->Input Device "Keyboard0"
[ 358.901] (**) Option "DontZap" "off"
[ 358.901] (**) Option "StandbyTime" "5"
[ 358.901] (**) Option "SuspendTime" "5"
[ 358.901] (**) Option "OffTime" "5"
[ 358.901] (**) Option "Xinerama" "on"
[ 358.901] (**) Option "AutoAddDevices" "off"
[ 358.901] (**) Not automatically adding devices
[ 358.901] (==) Automatically enabling devices
[ 358.902] (**) Xinerama: enabled
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/
[ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 358.902] (II) Loader magic: 0x81f1f80
[ 358.902] (II) Module ABI versions:
[ 358.902] X.Org ANSI C Emulation: 0.4
[ 358.902] X.Org Video Driver: 8.0
[ 358.902] X.Org XInput driver : 11.0
[ 358.902] X.Org Server Extension : 4.0
[ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
[ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
[ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
[ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) LoadModule: "extmod"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 358.904] (II) Module extmod: vendor="X.Org Foundation"
[ 358.904] compiled for 1.9.2, module version = 1.0.0
[ 358.904] Module class: X.Org Server Extension
[ 358.904] ABI class: X.Org Server Extension, version 4.0
[ 358.904] (II) Loading extension MIT-SCREEN-SAVER
[ 358.904] (II) Loading extension XFree86-VidModeExtension
[ 358.904] (II) Loading extension XFree86-DGA
[ 358.904] (II) Loading extension DPMS
[ 358.904] (II) Loading extension XVideo
[ 358.904] (II) Loading extension XVideo-MotionCompensation
[ 358.904] (II) Loading extension X-Resource
[ 358.904] (II) LoadModule: "glx"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 358.905] (II) Module glx: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.0.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (==) AIGLX enabled
[ 358.905] (II) Loading extension GLX
[ 358.905] (II) LoadModule: "record"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 358.905] (II) Module record: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.13.0
[ 358.905] Module class: X.Org Server Extension
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension RECORD
[ 358.905] (II) LoadModule: "dri2"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 358.905] (II) Module dri2: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.2.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension DRI2
[ 358.905] (II) LoadModule: "dbe"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 358.906] (II) Module dbe: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] Module class: X.Org Server Extension
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension DOUBLE-BUFFER
[ 358.906] (II) LoadModule: "dri"
[ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 358.906] (II) Module dri: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension XFree86-DRI
[ 358.906] (II) LoadModule: "synaptics"
[ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.0, module version = 1.3.0
[ 358.906] Module class: X.Org XInput Driver
[ 358.906] ABI class: X.Org XInput driver, version 11.0
[ 358.906] (II) LoadModule: "intel"
[ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 358.907] (II) Module intel: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 2.12.0
[ 358.907] Module class: X.Org Video Driver
[ 358.907] ABI class: X.Org Video Driver, version 8.0
[ 358.907] (II) LoadModule: "mouse"
[ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 358.907] (II) Module mouse: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 1.6.0
[ 358.907] Module class: X.Org XInput Driver
[ 358.907] ABI class: X.Org XInput driver, version 11.0
[ 358.907] (II) LoadModule: "synaptics"
[ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.907] (II) LoadModule: "kbd"
[ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 358.908] (II) Module kbd: vendor="X.Org Foundation"
[ 358.908] compiled for 1.9.0, module version = 1.4.0
[ 358.908] Module class: X.Org XInput Driver
[ 358.908] ABI class: X.Org XInput driver, version 11.0
[ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 358.908] (--) using VT number 7
[ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: drmOpenMinor returns 10
[ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 358.916] (==) intel(0): RGB weight 888
[ 358.916] (==) intel(0): Default visual is TrueColor
[ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 358.916] (--) intel(0): Chipset: "945GM"
[ 358.916] (==) intel(0): video overlay key set to 0x101fe
[ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
[ 358.953] (**) intel(0): Option "Disable" "true"
[ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
[ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 359.340] (II) intel(0): Output TV1 has no monitor section
[ 359.380] (II) intel(0): EDID for output VGA1
[ 359.486] (II) intel(0): EDID for output LVDS1
[ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
[ 359.486] (II) intel(0): Year: 2006 Week: 17
[ 359.486] (II) intel(0): EDID Version: 1.3
[ 359.486] (II) intel(0): Digital Display Input
[ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 359.486] (II) intel(0): Gamma: 2.20
[ 359.486] (II) intel(0): No DPMS capabilities specified
[ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 359.486] (II) intel(0): First detailed timing is preferred mode
[ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
[ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
[ 359.486] (II) intel(0): Manufacturer's mask: 0
[ 359.486] (II) intel(0): Supported detailed timing:
[ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 359.486] (II) intel(0): Unknown vendor-specific block f
[ 359.486] (II) intel(0): FD1631154WB4
[ 359.486] (II) intel(0): /BRZÄêÿ
[ 359.486] (II) intel(0): EDID (in hex):
[ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
[ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
[ 359.486] (II) intel(0): 21505400000001010101010101010101
[ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
[ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
[ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
[ 359.486] (II) intel(0): 44313633313135345742340a000000fe
[ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
[ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 359.487] (II) intel(0): Printing probed modes for output LVDS1
[ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 359.766] (II) intel(0): EDID for output TV1
[ 359.766] (II) intel(0): Output VGA1 disabled by config file
[ 359.766] (II) intel(0): Output LVDS1 connected
[ 359.766] (II) intel(0): Output TV1 disconnected
[ 359.766] (II) intel(0): Using exact sizes for initial modes
[ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 359.766] (==) intel(0): DPI set to (96, 96)
[ 359.767] (II) Loading sub module "fb"
[ 359.767] (II) LoadModule: "fb"
[ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 359.767] (II) Module fb: vendor="X.Org Foundation"
[ 359.767] compiled for 1.9.2, module version = 1.0.0
[ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
[ 359.767] (==) Depth 24 pixmap format is 32 bpp
[ 359.767] (II) intel(0): [DRI2] Setup complete
[ 359.767] (II) intel(0): [DRI2] DRI driver: i915
[ 359.767] (**) intel(0): Tiling enabled
[ 359.767] (**) intel(0): SwapBuffers wait enabled
[ 359.767] (==) intel(0): VideoRam: 262144 KB
[ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 359.767] (II) UXA(0): Driver registered support for the following operations:
[ 359.767] (II) solid
[ 359.767] (II) copy
[ 359.767] (II) composite (RENDER acceleration)
[ 359.767] (II) put_image
[ 359.767] (II) get_image
[ 359.767] (==) intel(0): Backing store disabled
[ 359.767] (==) intel(0): Silken mouse enabled
[ 359.767] (II) intel(0): Initializing HW Cursor
[ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 359.804] (==) intel(0): DPMS enabled
[ 359.805] (==) intel(0): Intel XvMC decoder disabled
[ 359.805] (II) intel(0): Set up textured video
[ 359.805] (II) intel(0): Set up overlay video
[ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
[ 359.805] (--) RandR disabled
[ 359.805] (II) Initializing built-in extension Generic Event Extension
[ 359.805] (II) Initializing built-in extension SHAPE
[ 359.805] (II) Initializing built-in extension MIT-SHM
[ 359.805] (II) Initializing built-in extension XInputExtension
[ 359.805] (II) Initializing built-in extension XTEST
[ 359.805] (II) Initializing built-in extension BIG-REQUESTS
[ 359.805] (II) Initializing built-in extension SYNC
[ 359.805] (II) Initializing built-in extension XKEYBOARD
[ 359.805] (II) Initializing built-in extension XC-MISC
[ 359.805] (II) Initializing built-in extension SECURITY
[ 359.805] (II) Initializing built-in extension XINERAMA
[ 359.805] (II) Initializing built-in extension XFIXES
[ 359.805] (II) Initializing built-in extension RENDER
[ 359.805] (II) Initializing built-in extension RANDR
[ 359.805] (II) Initializing built-in extension COMPOSITE
[ 359.805] (II) Initializing built-in extension DAMAGE
[ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
[ 360.019] (**) Option "Protocol" "auto"
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.019] (**) Mouse0: Device: "/dev/input/mice"
[ 360.019] (**) Mouse0: Protocol: "auto"
[ 360.019] (**) Option "CorePointer"
[ 360.019] (**) Mouse0: always reports core events
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
[ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 360.019] (**) Mouse0: Buttons: 11
[ 360.019] (**) Option "Sensitivity" "0.7"
[ 360.019] (**) Mouse0: Sensitivity: 0.7
[ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 360.019] (**) Mouse0: (accel) acceleration profile 0
[ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
[ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 360.311] (II) Synaptics touchpad driver version 1.3.0
[ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
[ 360.312] (**) Option "Device" "/dev/input/event6"
[ 360.312] (--) touchpad: x-axis range 1472 - 5472
[ 360.312] (--) touchpad: y-axis range 1408 - 4448
[ 360.312] (--) touchpad: pressure range 0 - 255
[ 360.312] (--) touchpad: finger width range 0 - 0
[ 360.312] (--) touchpad: buttons: left right double triple
[ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
[ 360.312] (**) Option "TapButton1" "1"
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "SendCoreEvents"
[ 360.312] (**) touchpad: always reports core events
[ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
[ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 360.312] (**) touchpad: MaxSpeed is now 1.75
[ 360.312] (**) touchpad: AccelFactor is now 0.040
[ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
[ 360.312] (**) touchpad: (accel) acceleration profile 1
[ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
[ 360.312] (**) touchpad: (accel) acceleration threshold: 4
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "CoreKeyboard"
[ 360.312] (**) Keyboard0: always reports core events
[ 360.312] (**) Option "Protocol" "standard"
[ 360.312] (**) Keyboard0: Protocol: standard
[ 360.312] (**) Option "XkbRules" "base"
[ 360.312] (**) Keyboard0: XkbRules: "base"
[ 360.312] (**) Option "XkbModel" "pc105"
[ 360.312] (**) Keyboard0: XkbModel: "pc105"
[ 360.312] (**) Option "XkbLayout" "fr"
[ 360.313] (**) Keyboard0: XkbLayout: "fr"
[ 360.313] (**) Option "XkbVariant" "oss"
[ 360.313] (**) Keyboard0: XkbVariant: "oss"
[ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
[ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
[ 360.313] (**) Option "CustomKeycodes" "off"
[ 360.313] (**) Keyboard0: CustomKeycodes disabled
[ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 360.372] (II) AutoAddDevices is off - not adding device.
[ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 360.373] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 360.377] (II) AutoAddDevices is off - not adding device.
[ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
[ 360.379] (II) AutoAddDevices is off - not adding device.
[ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
[ 360.380] (II) AutoAddDevices is off - not adding device.
[ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
[ 360.382] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
[ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
[ 368.503] (II) intel(0): Printing DDC gathered Modelines:
[ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 369.076] (--) touchpad: touchpad found
[ 441.972] (II) 3rd Button detected: disabling emulate3Button
output of glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.8.3
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
32 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
48 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

Gusar wrote:
*sigh*
Do you have problems with anything that's *not* glxgears?
I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears?

[Solved] xf86-video-Intel-2.99.912-1 breaks xorg

After the update yesterday of the this driver my xorg does not start anymore.
I reverted to xf86-video-Intel-2.99.911-2 and the problem went away.
Can someone please shed some light on this.
Below is the output of Xorg.0.log.
[ 1261.238]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 1261.239] X Protocol Version 11, Revision 0
[ 1261.240] Build Operating System: Linux 3.14.0-4-ARCH i686
[ 1261.240] Current Operating System: Linux liberty 3.14.6-1-ARCH #1 SMP PREEMPT Sun Jun 8 10:57:49 CEST 2014 i686
[ 1261.240] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw ipv6.disable=1 initrd=../initramfs-linux.img systemd.unit=multi-user.target
[ 1261.242] Build Date: 14 April 2014 08:41:02AM
[ 1261.242]
[ 1261.243] Current version of pixman: 0.32.4
[ 1261.245] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1261.245] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1261.249] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 16 13:26:53 2014
[ 1261.250] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1261.251] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1261.251] (==) No Layout section. Using the first Screen section.
[ 1261.251] (==) No screen section available. Using defaults.
[ 1261.251] (**) |-->Screen "Default Screen Section" (0)
[ 1261.251] (**) | |-->Monitor "<default monitor>"
[ 1261.252] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1261.252] (**) | |-->Device "Intel Graphics"
[ 1261.252] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1261.252] (==) Automatically adding devices
[ 1261.252] (==) Automatically enabling devices
[ 1261.252] (==) Automatically adding GPU devices
[ 1261.252] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1261.252] Entry deleted from font path.
[ 1261.252] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1261.252] Entry deleted from font path.
[ 1261.252] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1261.252] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1261.252] Entry deleted from font path.
[ 1261.252] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1261.252] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 1261.252] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1261.252] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1261.252] (II) Loader magic: 0x8264660
[ 1261.252] (II) Module ABI versions:
[ 1261.252] X.Org ANSI C Emulation: 0.4
[ 1261.252] X.Org Video Driver: 15.0
[ 1261.252] X.Org XInput driver : 20.0
[ 1261.252] X.Org Server Extension : 8.0
[ 1261.252] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1261.254] (--) PCI:*(0:0:2:0) 8086:2572:1014:0285 rev 2, Mem @ 0xc8000000/134217728, 0xc0000000/524288, I/O @ 0x00001800/8
[ 1261.254] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1261.256] Initializing built-in extension Generic Event Extension
[ 1261.257] Initializing built-in extension SHAPE
[ 1261.258] Initializing built-in extension MIT-SHM
[ 1261.259] Initializing built-in extension XInputExtension
[ 1261.260] Initializing built-in extension XTEST
[ 1261.261] Initializing built-in extension BIG-REQUESTS
[ 1261.262] Initializing built-in extension SYNC
[ 1261.263] Initializing built-in extension XKEYBOARD
[ 1261.265] Initializing built-in extension XC-MISC
[ 1261.266] Initializing built-in extension SECURITY
[ 1261.267] Initializing built-in extension XINERAMA
[ 1261.268] Initializing built-in extension XFIXES
[ 1261.269] Initializing built-in extension RENDER
[ 1261.270] Initializing built-in extension RANDR
[ 1261.272] Initializing built-in extension COMPOSITE
[ 1261.273] Initializing built-in extension DAMAGE
[ 1261.274] Initializing built-in extension MIT-SCREEN-SAVER
[ 1261.275] Initializing built-in extension DOUBLE-BUFFER
[ 1261.276] Initializing built-in extension RECORD
[ 1261.278] Initializing built-in extension DPMS
[ 1261.279] Initializing built-in extension Present
[ 1261.280] Initializing built-in extension DRI3
[ 1261.281] Initializing built-in extension X-Resource
[ 1261.283] Initializing built-in extension XVideo
[ 1261.284] Initializing built-in extension XVideo-MotionCompensation
[ 1261.285] Initializing built-in extension XFree86-VidModeExtension
[ 1261.286] Initializing built-in extension XFree86-DGA
[ 1261.288] Initializing built-in extension XFree86-DRI
[ 1261.289] Initializing built-in extension DRI2
[ 1261.289] (II) "glx" will be loaded by default.
[ 1261.289] (II) LoadModule: "dri2"
[ 1261.289] (II) Module "dri2" already built-in
[ 1261.289] (II) LoadModule: "glamoregl"
[ 1261.290] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 1261.293] (II) Module glamoregl: vendor="X.Org Foundation"
[ 1261.293] compiled for 1.15.0, module version = 0.6.0
[ 1261.293] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1261.293] (II) LoadModule: "glx"
[ 1261.293] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1261.293] (II) Module glx: vendor="X.Org Foundation"
[ 1261.293] compiled for 1.15.1, module version = 1.0.0
[ 1261.293] ABI class: X.Org Server Extension, version 8.0
[ 1261.293] (==) AIGLX enabled
[ 1261.295] Loading extension GLX
[ 1261.295] (II) LoadModule: "intel"
[ 1261.295] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1261.296] (II) Module intel: vendor="X.Org Foundation"
[ 1261.296] compiled for 1.15.1, module version = 2.99.912
[ 1261.296] Module class: X.Org Video Driver
[ 1261.296] ABI class: X.Org Video Driver, version 15.0
[ 1261.296] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 1261.296] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 1261.297] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 1261.297] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 1261.297] (++) using VT number 1
[ 1261.297] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1261.297] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1261.297] (==) intel(0): RGB weight 888
[ 1261.297] (==) intel(0): Default visual is TrueColor
[ 1261.297] (**) intel(0): Option "AccelMethod" "uxa"
[ 1261.297] (--) intel(0): Integrated Graphics Chipset: Intel(R) 865G
[ 1261.297] (**) intel(0): Relaxed fencing disabled
[ 1261.297] (**) intel(0): Wait on SwapBuffers? enabled
[ 1261.297] (**) intel(0): Triple buffering? enabled
[ 1261.297] (**) intel(0): Framebuffer tiled
[ 1261.297] (**) intel(0): Pixmaps tiled
[ 1261.297] (**) intel(0): 3D buffers tiled
[ 1261.297] (**) intel(0): SwapBuffers wait enabled
[ 1261.297] (==) intel(0): video overlay key set to 0x101fe
[ 1261.436] (II) intel(0): Output VGA1 has no monitor section
[ 1261.576] (II) intel(0): EDID for output VGA1
[ 1261.576] (II) intel(0): Manufacturer: GSM Model: 4bc1 Serial#: 16843009
[ 1261.576] (II) intel(0): Year: 2009 Week: 1
[ 1261.576] (II) intel(0): EDID Version: 1.3
[ 1261.576] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 1261.576] (II) intel(0): Sync: Separate
[ 1261.576] (II) intel(0): Max Image Size [cm]: horiz.: 41 vert.: 23
[ 1261.576] (II) intel(0): Gamma: 2.20
[ 1261.576] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 1261.576] (II) intel(0): First detailed timing is preferred mode
[ 1261.576] (II) intel(0): redX: 0.642 redY: 0.334 greenX: 0.302 greenY: 0.611
[ 1261.576] (II) intel(0): blueX: 0.144 blueY: 0.069 whiteX: 0.313 whiteY: 0.329
[ 1261.576] (II) intel(0): Supported established timings:
[ 1261.577] (II) intel(0): 720x400@70Hz
[ 1261.577] (II) intel(0): 640x480@60Hz
[ 1261.577] (II) intel(0): 640x480@75Hz
[ 1261.577] (II) intel(0): 800x600@60Hz
[ 1261.577] (II) intel(0): 800x600@75Hz
[ 1261.577] (II) intel(0): 832x624@75Hz
[ 1261.577] (II) intel(0): 1024x768@60Hz
[ 1261.577] (II) intel(0): 1024x768@75Hz
[ 1261.577] (II) intel(0): Manufacturer's mask: 0
[ 1261.577] (II) intel(0): Supported standard timings:
[ 1261.577] (II) intel(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 1261.577] (II) intel(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 1261.577] (II) intel(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 1261.577] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497
[ 1261.577] (II) intel(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 1261.577] (II) intel(0): Supported detailed timing:
[ 1261.577] (II) intel(0): clock: 85.0 MHz Image Size: 410 x 230 mm
[ 1261.577] (II) intel(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 1261.577] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 1261.577] (II) intel(0): Supported detailed timing:
[ 1261.577] (II) intel(0): clock: 79.5 MHz Image Size: 410 x 230 mm
[ 1261.577] (II) intel(0): h_active: 1280 h_sync: 1344 h_sync_end 1472 h_blank_end 1664 h_border: 0
[ 1261.577] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 778 v_blanking: 798 v_border: 0
[ 1261.577] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 95 MHz
[ 1261.577] (II) intel(0): Monitor name: M197WDP
[ 1261.577] (II) intel(0): EDID (in hex):
[ 1261.577] (II) intel(0): 00ffffffffffff001e6dc14b01010101
[ 1261.577] (II) intel(0): 0113010308291778ea66f5a4554d9c24
[ 1261.577] (II) intel(0): 115054a56a00314f454f614f71408100
[ 1261.577] (II) intel(0): 010101010101342150b051001b304070
[ 1261.577] (II) intel(0): 36009ae61000001e0e1f008051001e30
[ 1261.577] (II) intel(0): 408037009ae61000001c000000fd0038
[ 1261.577] (II) intel(0): 4b1e3d09000a202020202020000000fc
[ 1261.577] (II) intel(0): 004d3139375744500a202020202000e7
[ 1261.577] (II) intel(0): Printing probed modes for output VGA1
[ 1261.577] (II) intel(0): Modeline "1360x768"x59.7 85.00 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.4 kHz eP)
[ 1261.577] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 1261.577] (II) intel(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 1261.577] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 1261.577] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1261.577] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 1261.577] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1261.578] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 1261.578] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1261.578] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1261.578] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1261.578] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1261.578] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1261.578] (II) intel(0): Output VGA1 connected
[ 1261.578] (II) intel(0): Using exact sizes for initial modes
[ 1261.578] (II) intel(0): Output VGA1 using initial mode 1360x768
[ 1261.578] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1261.578] (II) intel(0): Kernel page flipping support detected, enabling
[ 1261.578] (==) intel(0): DPI set to (96, 96)
[ 1261.578] (II) Loading sub module "fb"
[ 1261.578] (II) LoadModule: "fb"
[ 1261.578] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1261.579] (II) Module fb: vendor="X.Org Foundation"
[ 1261.579] compiled for 1.15.1, module version = 1.0.0
[ 1261.579] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1261.579] (II) Loading sub module "dri2"
[ 1261.579] (II) LoadModule: "dri2"
[ 1261.579] (II) Module "dri2" already built-in
[ 1261.579] (II) Loading sub module "dri3"
[ 1261.579] (II) LoadModule: "dri3"
[ 1261.579] (WW) Warning, couldn't open module dri3
[ 1261.579] (II) UnloadModule: "dri3"
[ 1261.579] (II) Unloading dri3
[ 1261.579] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[ 1261.579] (==) Depth 24 pixmap format is 32 bpp
[ 1261.579] (II) intel(0): Allocated new frame buffer 1408x768 stride 8192, tiled
[ 1261.580] (II) UXA(0): Driver registered support for the following operations:
[ 1261.580] (II) solid
[ 1261.580] (II) copy
[ 1261.580] (II) composite (RENDER acceleration)
[ 1261.580] (II) put_image
[ 1261.580] (II) get_image
[ 1261.580] (II) intel(0): [DRI2] Setup complete
[ 1261.580] (II) intel(0): [DRI2] DRI driver: i915
[ 1261.580] (II) intel(0): [DRI2] VDPAU driver: i915
[ 1261.580] (==) intel(0): Backing store enabled
[ 1261.580] (==) intel(0): Silken mouse enabled
[ 1261.580] (II) intel(0): Initializing HW Cursor
[ 1261.580] (II) intel(0): Use legacy UXA acceleration.
[ 1261.580] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1261.580] (==) intel(0): DPMS enabled
[ 1261.580] (==) intel(0): Intel XvMC decoder disabled
[ 1261.580] (II) intel(0): Set up overlay video
[ 1261.580] (II) intel(0): DRI2: Enabled
[ 1261.580] (II) intel(0): DRI3: Disabled
[ 1261.580] (==) intel(0): hotplug detection: "enabled"
[ 1261.596] (--) RandR disabled
[ 1261.618] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1261.618] (II) AIGLX: enabled GLX_ARB_create_context
[ 1261.618] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1261.618] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1261.618] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1261.618] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1261.618] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 1261.618] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 1261.618] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1261.618] (II) AIGLX: Loaded and initialized i915
[ 1261.618] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1261.619] (EE)
Fatal server error:
[ 1261.619] (EE) failed to create screen resources(EE)
[ 1261.620] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1261.620] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1261.620] (EE)
[ 1261.620] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1261.639] (EE) Server terminated with error (1). Closing log file.
Last edited by libernux (2014-06-16 14:44:54)

Exact same problem.
Lenovo S12 (Intel Atom)
pacman.log...
[2014-06-15 06:41] [PACMAN] upgraded xf86-video-intel (2.99.911-2 -> 2.99.912-1)
Xorg.0.log...
[ 1472.441] (II) Loading sub module "fb"
[ 1472.441] (II) LoadModule: "fb"
[ 1472.441] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1472.443] (II) Module fb: vendor="X.Org Foundation"
[ 1472.443] compiled for 1.15.1, module version = 1.0.0
[ 1472.443] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1472.443] (II) Loading sub module "dri2"
[ 1472.443] (II) LoadModule: "dri2"
[ 1472.443] (II) Module "dri2" already built-in
[ 1472.443] (II) Loading sub module "dri3"
[ 1472.444] (II) LoadModule: "dri3"
[ 1472.445] (WW) Warning, couldn't open module dri3
[ 1472.445] (II) UnloadModule: "dri3"
[ 1472.445] (II) Unloading dri3
[ 1472.445] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
<--snip-->
[ 1472.513] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1472.513] (II) AIGLX: Loaded and initialized i915
[ 1472.513] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1472.515] (EE)
Fatal server error:
[ 1472.515] (EE) failed to create screen resources(EE)
[ 1472.515] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1472.515] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1472.515] (EE)
[ 1472.515] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1472.539] (EE) Server terminated with error (1). Closing log file.
Edit: Bug filed https://bugs.archlinux.org/task/40860 Monday, 16 June 2014, 22:46 GMT+8
Last edited by keepitsimpleengineer (2014-06-16 14:49:59)

Xf86-video-intel 2.6.3-2 problem

Hello,
after upgrade from 2.6.3-1 to 2.6.3-2 of xf86-video-intel driver I have got problem with 3D.
For example - KDE4-2 hangs (the kayboard stop working)
When I test it with twm -t then I have no problem with keyboard, but with 3D. The glxgears
shows chaotic tringles (not gears).
In Xorg.0.log I have got strange devices detected by evdev driver. There is something about Video bus detected
as Input Keyboard (few times).
After downgrade xf86-video-intel to 2.6.3-1 everything works fine again.
What is strange - after problems with display and keyboard under kde4 - the bios of my laptop (DELL E6400)
was starting very long time (more than 1 minute) from BIOS boot logo and progress bar to lilo display.
best regards
iu1j4

y0g1 wrote:What is strange - after problems with display and keyboard under kde4 - the bios of my laptop (DELL E6400)
After hard locks the E6400 BIOS checks the memory thoroughly. This should only happen once after the lockup.
hightower

In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it does'nt work there . Means the page is not navigating towards the address. Kindly solve the problem

In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it doesn't work there . Means the page is not navigating towards the address. Kindly solve the problem

This issue can be caused by an extension that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

[upstr] textdisplay problems after update to xf86-video-intel-2.99.911

Hardware: Intel 855GM integrated graphics. Driver: xf86-video-intel
Versions
* xf86-video-intel-2.99.911-1-i686
* xf86-video-intel-2.99.911-2-i686 (current)
produce display errors on http://www.faz.net/ in Firefox (using a fresh profile results in same error) under KDE4, TWM, openbox and LXDE. See article text screenshot http://i.imgur.com/xV4sxni.png. Missing text lines, in the headlines on hover, in the main text after load but more severe after scrolling a bit. Everything else displays fine (images, firefox' GUI).
The error does also occur under another user account (with nearly standard settings) in KDE4 (same computer). All packages up to date.
NO errors with xf86-video-intel-2.99.910-1-i686 (to which I have downgraded now). With this and the older versions I had no such problems since months.
NO errors in other programs like Chromium or Konqueror (but did not test that much, Firefox is what I use often).
Note that SNA cannot be a issue since my hardware is older and it worked after the given (in the wiki) date.
Should I report this as a bug against this package? Does anyone have any tips or even being able to reproduce? Thank you all!
(Edit 1 and 2: error also happens under openbox, not sure why I did not see it during the first try.)
Last edited by CarlEitsger (2014-04-10 19:35:26)

Thanks, Andy. Yes I tried with the -2 version, it has the same problem.
I did not find any previous upstream reports matching this problem. I also did not find any other mentions of this problem anywhere else. Okay I will try to report it there upstream in the next few days.

[SOLVED] xf86-video-intel update to 2.99.912-1 breaks video rendering

After a full system update today video playback in X windows (both hardware-accelerated and not) breaks horribly. Playing back videos causes tearing, black areas of the screen and then a hard lock-up.
Looking back through the updated packages and testing one-by-one reveals the immediate culprit to be the update to xf86-video-intel from 2.99.911-2 to 2.99.912-1. Rolling back just this package restores everything to working order (including hardware-accelerated video).
Other hopefully relevant installed packages:
linux 3.15.1-1
libva 1.3.1-1
libva-intel-driver 1.3.2-1
mesa 10.2.1-2
mesa-libgl 10.2.1-2
intel-dri 10.2.1-2
My GPU is Intel(R) HD Graphics 2500, the CPU is Intel(R) Core(TM) i3-3220T.
With either version of xf86-video-intel installed my desktop environment loads successfully, and works normally, up to the point where any video playback is attempted.
Other information from X.org.0.log:
[ 2069.648] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2500
[ 2069.648] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 2069.648] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2069.648] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2069.648] (==) intel(0): RGB weight 888
[ 2069.648] (==) intel(0): Default visual is TrueColor
[ 2069.648] (**) intel(0): Option "AccelMethod" "sna"
[ 2069.648] (**) intel(0): Option "TearFree" "true"
[ 2069.649] (**) intel(0): Framebuffer tiled
[ 2069.649] (**) intel(0): Pixmaps tiled
[ 2069.649] (**) intel(0): "Tear free" enabled
[ 2069.649] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 2069.649] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 0
[ 2069.649] (==) intel(0): DPI set to (96, 96)
[ 2069.649] (II) Loading sub module "dri2"
[ 2069.649] (II) LoadModule: "dri2"
[ 2069.649] (II) Module "dri2" already built-in
[ 2069.649] (==) Depth 24 pixmap format is 32 bpp
[ 2069.649] (II) intel(0): SNA initialized with Ivybridge (gen7, gt1) backend
[ 2069.649] (==) intel(0): Backing store enabled
[ 2069.649] (==) intel(0): Silken mouse enabled
[ 2069.649] (II) intel(0): HW Cursor enabled
[ 2069.649] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2069.649] (==) intel(0): DPMS enabled
[ 2069.649] (II) intel(0): [DRI2] Setup complete
[ 2069.649] (II) intel(0): [DRI2] DRI driver: i965
[ 2069.649] (II) intel(0): [DRI2] VDPAU driver: i965
[ 2069.649] (II) intel(0): direct rendering: DRI2 Enabled
Last edited by DcUK (2014-06-18 19:55:32)

I had the same issue and downgrading to 2.99.911 fixed it.
Could you file a bug report for the package to disable the Tear-Free option again?
Thanks!
[Edit]
I took a look at the package files and couldn't see anything related to "Tear-Free". Would you mind to tell me what you meant?
[/Edit]
[Edit 2]
This seems related. However, I don't feel like patching and building the driver. I guess I just wait for 913 and complain again if it's still broken then.
[/Edit 2]
Last edited by jrk (2014-07-01 18:00:47)

Intel KMS with live usb boot

Hey. I've KMS (early start) working perfectly on an older 82845 card with all the newest updates to core (2.6.32, etc) and xf86-video-intel. However, using a larch bootable flash drive with all the same packages, I can't get KMS to engage -- early OR late start.
Is there something different about the speed or ??? with a flash drive boot? I've been careful to ensure the .img file created from mkinitcpio had the correct hooks and the 'intel_agp i915' modules. I added the 'i915.modeset=1' to the kernel line in grub. It still boots fine with the new .img file, it just won't start KMS. Would be nice to have KMS, because there is substantial display corruption that occurs when I switch virtual terminals without KMS.
Any ideas?
Thanks!
Scott
Last edited by firecat53 (2010-01-01 19:05:05)

I have an early 2006 intel iMac and am having the same problem with the new keyboard. Called AppleCare, who sent me to the local Apple Store after trying several minutes in vain to cure the problem.
One of the Genius's at the Apple Store pulled up Article 306893, Apple Keyboard (2007): Cannot boot to Startup Manager. This is a document that's apparently not available to the public, as I have the printed copy, but have been unable to pull it up in my searches.
The issue is some intel-based iMacs and Mac mini computers shipped prior to 2007 may not boot to the Startup Manager when holding down the Option key on the aluminum keyboard (2007).
My iMac is listed among the products affected.
The solution they offer is to follow these steps:
1. While starting the computer, point the Apple remote at the computer and hold down the Menu button. The computer should boot into the Startup manager.
2. Use the Fast Forward and Rewind buttons to select the desired boot volume.
3. Once the desired boot volume is selected, press the Play / Pause button to continue booting.
Hope this helps. It works for my system. Still doesn't solve the keyboard issue but offers an acceptable workaround.

Xf86-video-intel 2.10 may required xorg.conf changes?

Upon upgrading to xf86-video-intel 2.10.0-1, my dual monitor xorg.conf setup was no longer working (both monitors displayed the same low-resolution content). The fix involved the following search/replace operations in xorg.conf:
- replace "monitor-LVDS" with "monitor-LVDS1"
- replace "monitor-TMDS-1" with "monitor-DVI1"
- replace "monitor-VGA" with "monitor-VGA1"
A couple of questions:
- Was the xf-video-intel upgrade responsible for the problem I encountered?
- If so, is this documented anywhere? (It doesn't seem to be in the 2.10.0 release notes).

noillagr wrote:
Upon upgrading to xf86-video-intel 2.10.0-1, my dual monitor xorg.conf setup was no longer working (both monitors displayed the same low-resolution content). The fix involved the following search/replace operations in xorg.conf:
- replace "monitor-LVDS" with "monitor-LVDS1"
- replace "monitor-TMDS-1" with "monitor-DVI1"
- replace "monitor-VGA" with "monitor-VGA1"
A couple of questions:
- Was the xf-video-intel upgrade responsible for the problem I encountered?
- If so, is this documented anywhere? (It doesn't seem to be in the 2.10.0 release notes).
no, you were using UMS, which defined display ports that way.
the KMS method in use now names your ports LVDS1, DVI1 and VGA1. the reason this happened with the 2.10 drivers is that they now require KMS to work, you were forced to switch.

Xf86-video-intel disable tv

I am on a lenovo T61 laptop. I was running xorg 1.2 (current) without any xorg.conf with kde and everything worked fine, i had the right resolution of 1440x900, except i had no video acceleration ( intel 965 chipset/X3100). I did Xorg -configure to write an xorg.conf to disk and put it in /ext/X11/xorg.conf. I rebooted and everything was fine. I then enabled the testing repo, and updated xorg to 1.3 and installed the xf86-video-intel driver, though i didnt enable. Again i rebooted and everything was working except video acceleration. I then enable the i810 driver in xorg.conf and rebooted. It loaded, but now my screen isnt configured properly. Kde detects my screen as 1024x768, but video is still being output at 1440x900; this leads to kde taking up about 1/2 the screen and making control awkward. xrandr shows that the internal monitor is displaying at 1440x900, but that a tv is detected and playing at 1024x768. This leads me to think that kde is picking up on the tv resolution and tries to display as if that was my monitors resolution. No tv is connected.
So I guess the question that i should be asking: how do i disable tv out on the i965/X3100 chipset with the xf86-video-intel driver?

Well, i found the following thread which solved my problem: http://www.fedoraforum.org/forum/showth … p?t=159516
made the following alterations:
"One thing that you might run into (I did) is that GDM doesn't use the entire screen. Neither does gnome. This is because the TV output is enabled. You can disable it by adding the following commands to your xorg.conf
Section "Monitor"
Identifier "TVOutput"
Option "Disable" "true"
EndSection
and then in the Device Section add the following
Option "monitor-TV" "TVOutput""
Now everything seems to be working. The only problem, if it is one, is that xrandr only outputs "xrandr: Output TV is not disconnected but has no modes" instead of all the modes available for my laptop screen and which one is running.

[kinda SOLVED]video-intel KMS problems

Similar Messages

Maybe you are looking for