Kindle books dont appear after update to 10.5

After the update to iTunes 10.5 my Kindle purchased books are gone from iBooks.

Disregard. I forgot they are in the Kindle app.
Why can't you delete posts?

Similar Messages

Inapropriate apps appear after updates are done

I need help! I was looking through my son's (11) iPod touch recently and there were apps on there that were not purchased. My kids don't know the iTunes password, so all purchases have to be approved by me or my husband. These apps seemed to appear after an update was done. They are NOT appropriate for an 11 year old. I can't simply delete them because when you press and hold the icon, no 'X' appears for these apps. I'm very concerned that some apps in iTunes are not legit because this doesn't seem right. Can anyone help me remove them???

- The App and iTunes store is ste up so that there is a ten minute window to download something after the passwared for an update or purchse has been made. From your dscription, it appeared that that happened.
- It also appears that you have restrictions set that prohibit deleting apps. Go to Setings>General>Restrictions. You have to enter the passcode to change them.
- Look at the apps on the iPod. if there is one named Cycia, it means that the iPod had been jailbroken and that apps can be installed by means other than the App store.

New keyboard layout appeared after update - how to remove it?

Hello community,
I'm using two keyboard layouts RU and DE and switching them with Ctrl+Shift. After a recent update a third keyboard layout appeared - US. I checked /etc/X11/xorg.conf, /etc/hal/fdi/policy/10-keymap.fdi and /etc/rc.conf but in all of them there is no US layout. Setting everything there up for the DE and RU layout didn't help, still the US layout is in the layouts list in Gnome. If I remove it from that list, it appears after the next reboot. So how can I go rid of it?
Here are the config files:
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de,ru"
Option "XkbVariant" ",winkeys"
Option "XkbOptions" "grp:alt_shift_toggle"
EndSection
<?xml version="1.0" encoding="ISO-8859-1"?> 
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>
<match key="info.capabilities" contains="input.keys">
<merge key="input.xkb.rules" type="string">base</merge>

<merge key="input.xkb.model" type="string">keyboard</merge>
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
string="Linux">
<merge key="input.xkb.model" type="string">evdev</merge>
</match>
<merge key="input.xkb.layout" type="string">de,ru</merge>
<merge key="input.xkb.variant" type="string">nodeadkeys,winkeys</merge>
<merge key="input.xkb.options" type="string">grp: ctrl_shift_toggle</merge>
</match>
</device>
</deviceinfo>
# /etc/rc.conf - Main Configuration for Arch Linux
LOCALE="de_DE.utf8"
HARDWARECLOCK="local"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="de-latin1-nodeadkeys"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
Thanks, PhotonX

Thanks for your input, guys, I think, this issue has been already reported (quite a long time ago) which is even the top entry of the most wanted tasks: http://bugs.archlinux.org/toplevel/proj1 So the only thing we can do is to follow the comments and to hope for a fix.

Ken burn efect dont work after updating 6.0.3

after updating my imovie to 6.0.3 version, i try to generate movement into a pic with ken burn efect, but it doesn't work anymore...did it happen to anyone else?? can somebody help me?

Maybe try the iMovie 6 forum.

Old passwords appeared after update to firefox 32

After updating to firefox 32 all passwords added or changed in august disappeared or returned to their previous states. But if I downgrade to previous version all passwords are on the right place. How to fix this? Thanks.

hello, have you switched between firefox 31 and a higher version in august once - there has been a change in the database that holds your passwords and the migration will only take place once - the first time you update from firefox 31 to a higher version. if you switch back to 31 again afterwards (downgrading isn't a path that is commonly supported) your pw changes won't be reflected...

Mail app and Safari dont work after updating to 10.6.8

Hello there,
i've got a serious problem, mail 4.6 isn't sending mails and safari doesn't open (it shoes an alert about a crash).
Things I did befor all that happened:
1- I organized my Programms inside de application folder. I moved some programmes inside a folder inside de applications folder. I guess this may cause some trouble when updating the system.
2- I made the automatic software uptade from my computer. (combo 10.6.8, followed by the security update).
3- After that I realised that mail hadnt upgraded. It wa still mail 4.5. So I moved all the programs back where they where before (I took them out of the sub-folders) and reinstaled only mail 4.6 from the internet. I did the same with Safari.
4- After this mess I saw that mail 4.6 was full of problems. First the sent mails where all crazy, with different addresses... And after a while it didnt even worked anymore to send emails.
5- So I reinstaled all the 10.6.8 and the security again. The first time I tried the computer crashed. Then I tried again. Now it got even worse. Safari shows a problem (report) and Mail 4.6 continues not sending mails just receiving them.
6- I dont know what to do??
What is happening?
Thank you!

Sorry guys for worthless topic, found bunch of same! So, I will try to down combo update and try than, should be fine they said.

Problem, radio dont starts after update to Mozilla Firefox 12

I have problem with a radio in a website after the update of Mozilla Firefox 12 When i log in the webste the radio dont starts, when i use the Internet Explorer the radio starts. Check the picture
http://img859.imageshack.us/img859/3150/egweggwe.png

You're welcome

Zen Micro "Player is Locked" will not appear after Updating to version 1.03.5 (Please He

Hi Everyone,
I just purchased a Zen Micro and seems to be in good working condition. I noticed that while runing the original firmware that when I locked the player a box saying "Player is locked" would appear if I tried to press another button.
However, after I updated to the next firmware (.03.5) I noticed that this would not appear any more. So I updated it to latest version 2.0... and noticed that it still doesn't appear.
Is this happening to anyone else who has updated the firmware? Please reply with any information since I am thinking that mine might be defecti've and therefore I would need to return it ASAP to get another one.
Also I noticed that the original factory-installed firmware is not included on the dowloads section.
Thank You,
ATT

... The player lock button "works" but a display would appear to let the user know that the player is locked (this display was a little box in the middle of the screen similar to the "shutting down" display, and would only appear when you pressed a button while the player was locked).
This used to work with the factory firmware version. However when I updated the firmware this does not appear anymore when I press a button while the player is locked. The lock functions but this display does not appear (is this also happening to anyone else?)
Please respond
-ATT

Settings alert badge still appearing after updating to iOS7

I updated my iPhone 4 to iOS 7 and a red badge on the settings icon appeared - looked to see if there was an update but it was already on the latest software. I have tried clearing it with all methods: soft reset, hard reset, checking for an update. No luck.
Any ideas? Thanks.

I have the same problem.
I downloaded and intslled IOS7 over the air (iPhone 4S) and after the installation, I have this annoying badge. I have scrolled through the settingss and i have restarted the Pohone. The badge ist still there.
Any ideas?

Partition called "Boot OS X" started to appear after update

There is a partition called "Boot OS X" that appears in Finder when I connect my external hard drive for the first time. It happens only the first time after restarting the system and it didn't happen before updating the system recently. When I try to disconnect it it asks me whether I also want to disconnect the other partition (the external drive's one) or not. Any ideas how to get rid of that? Thank you.

It sounds like you have a hard drive going bad (scraping and clicking noises). If you want to evaluate it, install SMART Utility from http://www.volitans-software.com/smart_utility.php . It will not only tell you the health of your drive, but will give you insight into the SMART sensors.
You might run the Apple hardware test. Find the original OS X disk that came with your system that says 'AHT Version x.x' in small print on the label. Reboot holding the alt/option key down, choose the Apple hardware test, and when prompted choose the extended test. If there are no errors, run it again, as it doesn't always pick up issues on one run.
If it were me doing an upgrade, I would install Snow Leopard, then apply the 10.6.8 combo update, available from the Apple download site. Using Disk Utilty, you repair permissions first, install the combo update (which contains all 10.6 updates in one package), then repair permissions again when done.
If you've had it less than a year or you have Applecare, you may just want to take it to the local Apple store for service, as baltwo suggested.

Itunes dont open after update

I recieved an update for Itunes last night now it dont open i tried to restart and i tried to reinstall but it still dont open

I had the same thing happen Kenneth. I downloaded iTunes from Apple and ran the install and it started working. Hope it helps.

Raw Folders not appearing after update

I just updated to the new version today and after I did when I start a new project it won't create a new folder for it in finder.
To explain further, I have my Aperture library in a folder on my HD called Aperture Files. This also houses a folder for every project I have created in Aperture and in those folders are the pics from those projects.
When I would import a pic before the update it would send the file to the Aperture Library and put it in the right project folder. I have created 3 projects and none have folders for them now.
I goofed today when I tried to delete a version and wound up deleting all the masters from that project. I had to reimport them. Not that big a deal as it was a small project that I had done little work on. Could this have messed things up?
What's the deal? Can I fix this easily?
Any help would be appreciated.

Correct me if I am wrong, or tell me that I am correct, but I think that I just realized that I really have no need for there to be folders outside of the Aperture Library for my raw pics. If I need them in a folder as raw I can just export them as such.
It makes more sense to have Aperture's Library handle all that so that they are all in one location and I am not having to searh for them over 4 different hard drives.
After looking at some of the tutorials I came to this conclusion.
Tell me if I am on the right track.

Why [Google mail] folder still appears after updating to Mavericks in Mail

Hello,
I have updated to Mavericks. After configuring Mail to sync with my Google account, the folder [Google Mail] is still present in Mail and the Important and Starred labes are in it. However, both subfolders, Improtant and Starred, are not syncronizing.
I have checked in Goolge and Important and Starred are set to work with IMAP. The strangest thing is that those folders should not be inside [Google Mail], but they are in my case. Does someone could help me to remove [Google Mail] folder and make Important and Starred work?
Thanks !

Several times I've re-entered my passwords under Preferences/Internet Accounts/iCloud and it won't save since I've installed Mavericks. Also, the iCloud icon in the left column in Preferences/Internet Accounts/iCloud is greyed out but allows me to click on it to set-up. When I click on iCloud the password is filled out but the "Enable this account" check-box is not checked. I check it, and all seems correct. The icon is no longer grey, the password is correct, the "activate this account" check-box is checked. Then, when I launch mail, notes etc. I'm still prompted to re-enter my apple ID. The log-in loop continues. For years my keychain has worked perfectly. What has changed in Mavericks?

How do I get rid of a new tool bar that appeared after updating to 3.6.13?

The last time Firefox updated, a new toolbar appeared. I got rid of most of the buttons but there is still a search part I cannot get rid of. How can I make this go away???

There are also other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.1 r85
# Next Generation Java Plug-in 1.6.0_15 for Mozilla browsers
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Console Launcher dont lauch after update ?

hi
i update the driver and now the console laucher dont start.
so i delete all driver, and creative program, reboot,
reinstall with the CD, same problem
help ?

hi
i uninstall everything, go in safe mode, install from the CD, reboot,
go in safe mode again, and update the driver.
Now i see this everything i try to open any creative software.
Some Componenets are not found. Please Reinstall the application ?
it seam like the program dont reconize the sound card
the sound work, everything work good 2 day ago, before the windows update for the driver
Now noting for option work
help

Kindle books dont appear after update to 10.5

Similar Messages

Maybe you are looking for