Kindly do not make these forums as only the game of points

Hi all,
Please stop mentioning commitments on the points as thread heading or as the part of threads.It sometimes mis guide the new persons in utilizing this forums.
Even though every body interested to gain points, it does not mean that points is the only ultimate goal of these forums.
And also think abt a while how threads on interview questions spiol the culture of the forums.
With rgds,
Anil Kumar Sharma .P

This might be stretching the argument, but...
In many cases, the answer 'original poster' wrote is not that original - it may be a code copy from his system which is his employer's IP (again weblogs containing slidesets used at customer site and then used in the blog on SDN comes to mind), a copy from SAP's documentation, a copy from OSS note and so on.
If I really tell anyone "RSXXXX will get you the change log table name" as an answer, it might be a copy from another post, but really, do you think it was such an 'original' answer drafted by the original poster that an acknowledgement is necessary?
An acknowledgement, where due, should be given I agree. But, many a times a URL opening something in another window (or same) for a two line answer is mere inconvenience for the questioner, compared to a cut-paste in the same thread. At least this is what is the decider for me. (If it is a small generic answer, just do a cut-paste, if it is a post where original thread needs to be acknowledged, mention the URL). In the end, your priority is to answer to help the questioner, why not make it easy by pasting it there in that thread? In the end, I would still think leaving it in poster's good-faith decision is the most practical option.
In general, people gaming for points are not that successful (you and me have discussed at least one such poster on this board), and others on the board do figure out what they are up to. I know it stretches the moderator's work but this is the price SDN has to pay for success.
As an example, if I ever quote Pizzaman's answer, I will mention the URL since he typically writes a well-formed descriptive answer and that effort needs to be appreciated, however if it is a two line code, I may paste it without bothering about mentioning the link.
In the end, one needs to be somewhat detached with the points one gets, or not. We all evolve (initially the craving for points is more, and it subsides to a level later). At any point in time different SDNers are at different points on that evolution curve, thus causing such friction/debates.
I take it philosophically, I know as a moderator you may not have that choice
Apologies for too much free time (on my hand) causing such long posts (perils of on-the-bench life).

Similar Messages

  • I just got an email showing that I purchased items totaling almost $25 on the 13th and I did not make these purchases.  What can I do?

    I just got an email showing that I purchased items totaling almost $25 on the 13th.  I did not make these purchases.  What can i do?

    iTunes Store: What to do if your account has been compromised

  • Even though I had synced numerous times, those tracks are not in my library. Only the purchased music.

    My new ipad2 doesn't show any of the music I had previously burned from all my CDs. Even thorough I had synced numerous times, those tracks are not in my library. Only the purchased music.

    Annlanzante wrote:
    My new ipad2 doesn't show any of the music I had previously burned from all my CDs. Even thorough I had synced numerous times, those tracks are not in my library. Only the purchased music.
    The tracks are not in your iTunes library?
    Or they are in the library but will not sync to the iPad?
    Select the iPad in iTunes.
    Click the Music tab at top.
    Tick Sync music and make sure Sync all is selected or if Sync selected is selected, make sure you tick what you want to sync.
    FYI: Burn means to create a CD (because you burn with the laser). RIP means to get off an audioCD onto the computer.

  • I can not make a wireless bridge in the band 2.4 Linksys wrt1900ac

    I can not make a wireless bridge in the band 2.4 I make the same settings on band 5 and runs perfect

    I'd check to see if the 1900AC can bridge two WiFi connections at the same time. It may only beable to bridge one or the other radio at a time. I know that with the 5Ghz radio is bridged on the 1900AC, the 2.4Ghz radio is running and working as a wireless AP.

  • Short Slo Mo video imported to Aperture or iPhoto via cable (Air Drop not supported on my iMac): only the SloMo section imports. Not the rest. Any fixes?

    Short Slo Mo video imported to Aperture or iPhoto via cable (Air Drop not supported on my iMac): only the SloMo section imports. Not the rest. Any fixes?

    Okay, as I'm working through this I see that I have to add the "Admin" account to each file with "read only" permission.  Simply changing the "everyone" account access does nothing. 
    So how do I change the permissions settings in iPhoto or Aperture to give each exported file the desired permissions?  I cannot locate a setting in the iPhoto or Aperture applications.
    Also, I added a password to the user account.  It did not change how files are output.

  • Could not make a new layer from the selection because the selected area is empty

    I have Photoshop CS5 and I'm trying to do a selection on a new layer and when I copy it this message appears: "could not make a new layer from the selection because the selected area is empty"..
    The new layer is selected, no other layer is selected. What the hell am I doing wrong???....Yes I'm a beginner.. ....please help?

    Hi There,
    So just to clarify you have made a new blank layer, made a selection on that layer and then done a Layer > New > Layer via Copy (or cmd J).
    The reason that you would get this error message is you have made a selection on a blank layer (effectively selecting nothing) and tried to duplicate it and Photoshop won't let you do that.
    When doing New Layer via Copy or New Layer via cut you selection needs to include some painted (coloured) pixels.
    Regards
    Paul
    PS. Maybe you could explain what you are trying to achieve by copying the layer and I could help a little more.

  • Where can I download lightroom 6, but NOT LR 6 CC? Only the new LR6 without any cloud features. Thanks!

    Where can I download lightroom 6, but NOT LR 6 CC? Only the new LR6 without any cloud features. On the dowloadsite I find only CC-downloads.
    Thanks
    Martin

    Hi Martin,
    Please follow the steps given in the article.
    Adobe Photoshop Lightroom Help | Serialize Lightroom CC trial to activate as Lightroom 6
    Hope this helps.
    Regards,
    Sumit Singh

  • After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

    After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.

    Hi, I get the same error EVERY time iTunes updates.
    I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
    My Question:
    Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
    It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
    Thank You,
    Steve

  • HT1918 I can not purchase credit card. In the game Clash Of Calns please help

    I can not purchase credit card. In the game Clash Of Calns please help

    What happens when you try to buy them, does the 'buy' button not work, do you get any error messages ... ?
    If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
    If it's a different problem ... ?

  • I can not make a "Automated Installation of the Introscope Agent" (Managed System Configuration, p.7)

    I can not make a "Byte Code Adapter Installation"
    When I open meets both paragraphs in step Managed System Configuration is somewhat obscure situations that do not allow the automatic configuration Introscope agent and Introscope Manager
    Please help to resolve a number of questions that might help me complete the setup :
    1. Why has the status of Enterprise Manager : <No Enterprise Manager configured> ( see picture)
    I set up Enterprise Manager in accordance with the installation instructions and complied with all the setting items . Since without any configuration can be associated with the appearance of this status ?
    2 . Why Server Node is empty detail settings ?
    JDK Location: 
    Enterprise Manager Host: 
    Enterprise Manager Port: 
    Introscope Agent Name: 
    Introscope Agent Profile: 
    Autoprobe Directives: 
    Wily Version: 
    Introscope Agent Version: 
    Introscope Agent Log Location:
    3 . What a mistake ($ MC: DIAG_WILY_MSG: 032 : L), which appears when I click configuration "Configure Introscope Agent Setup ...", and what it can be linked ? ( see picture )
    And the last question , which is also linked to the process of automatic configuration and refers to a phrase from the instruction (Introscope Version 9
    Installation Guide For SAP July 2012) points out "Automated Installation of the Introscope Agent via SMD"
    there is such an item:
    2 . Deploy ISAGENTJ5 *. SCA which is the Introscope Java Agent 9 with SDM to Solution Manager. You may need to deploy also ISAGENT *. SCA which is Introscope Java Agent 8.
    However, nowhere does it say where exactly ( on what the absolute path ) I must perform unloading and then what to do with this discharge

    The problem was resolved a small manipulation - on stage Basic Configuration,
    point 3 "Configure CA Introscope"
    I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
    Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
    Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

  • HT1918 Somehow the country associated with my account was changed to China.  I did not make this change and now the system will not let me update either my credit card information or the country back to the United States.  Help!!!

    Somehow the country associated with my account was changed to China.  I did not make this change.  My credit card information needs to be updated but the system will not let me update either my credit card information or the country back to the United States.  My updated credit card information is not accepted because the country is China.  It will not allow me to change the country until the credit card information is changed. Help!!!

    This exact thing has happened to me. Did you get it resolved? If so, how??

  • How can I make with a picture only the outlines visible?

    I don't come out of that, how I can only the outlines visible.

    Filter>Stylize>Glowing Edges>Image>Adjustments>Invert>Desaturate (if you want a black edge)>Levels to refine the edges.

  • Itunes will not open on Win 8 saying The Procedure entry point.....

    I had all sorts of issues getting iTunes to run on Windows 8 - but found a solution here somewhere.
    Suddenly today it is giving a massive long error message... The procedure entry point?videoTracks@QTMovie......... could not be located in the dynamic link library C:\Program Files (x86) Common Files \ Apple | Apple Application support \WebKit.dll
    I have repaured, uninstalled, reinstalled, uninstalled, downloaded a new version, installed/.... so far with restarting etc it has taken ages and nothing is changing the status.
    Any ideas anyone please?
    Thank
    Carol

    I know you've already fixed this one, Carol, but for other people reading this post, the following user tip might be useful:
    iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

  • I have 9 tabs, but when I try to make a tab group, only the current page shows up as a thumbnail, not all the tabs. I can't get them to work for me. All the tabs are listed on the right side of the tab groups box. What am I doing wrong?

    There's no thumbnails to drag around except one on the left side of the page (the one that's open). The right side of the page lists every tab I have created.

    Perhaps your problem is that '''you must save your browsing history''' in order to use app-tabs that would apply to groups as well but I did not test.
    * http://img232.imageshack.us/img232/4928/clearcachew.png
    I would suggest that if you do not save that stuff in bookmarks, that you will probably have a serious problem soon and lose your tabs, so if you count on them you could lose them. They should stand up to repeated restarts but I would not count of them as app-tabs myself, for one thing it is new, the other is I have to frequently wipe them out and restart, because I actively open new content into them and go back to the beginning of the tab history, and sometimes I can't, and sometimes I lose them by accidentally closing them -- and I must be able to close them in all manners that I close other tabs or I wouldn't be using them.
    There are people who keep 200 tabs open through restarting, that is not for me, I try to clear out the tabs frequently.
    That is what app-tabs are for as opposed to home pages, but I did have a problem when I tested with 120 since as app-tabs only about 65 can be seen at once even though I did reduce the width of app-tabs to about 2/3 the size that they were.. Problem I had when I restarted was that the window enlarged a bit beyond the screen, and my tab counter disappeared until I reduced the count to about 65. I do not allow tabs to scroll so you probably wouldn't have that problem.
    I forgot to test home page with 60 tabs. I do have something set to 75 though have to check that. I tested with 60 pages as home page. Brought firefox down and backup with the 1 app-tab and 60 home pages the app-tab is the same size as the 60 normal tabs from home page.
    Never used group-tabs by choice, since they messed me up I stay clear of them, I don't like them or anything large panoramic type of large thumbnails.

  • IPhone 3G on Universal Dock will not make SMS notification sound, only vibe

    When the phone is on the dock, none of the sounds for text messages are made, phone calls are, alarms are, but no text messages. Is anyone else experiencing this? It makes noises for calls, noises for reminders, but for SMS just vibrates.
    Thanks.

    Hi Randall,
    If you haven't already, try resetting the iPhone by holding the Home & Sleep/Wake buttons until you see an Apple logo as described here: http://docs.info.apple.com/article.html?artnum=305743
    -Jason

Maybe you are looking for