Kindly Is it possible to disable DHCP in this product wap4400n ?

Dear Engineers and Technicin,
Good Morning,
Kindly I need support for wap4400n and I did not find it in the user guide and the administration guid.
Is it possible to disable DHCP in this product?
I want the wap4400n Access Point to distribute DHCP from the windows server.
Best regards,
Asad
Refrence:
http://www.cisco.com/en/US/products/ps10052/index.html

I dunno the product, but I might be this ...
http://www.cisco.com/en/US/docs/wireless/access_point/csbap/wap4410n/administration/guide/WAP4410N_Admin_Guide.pdf
page 25 ...
STEP 1 Click Setup  > Basic Setup .
STEP  2 From the IP Settings  drop-down menu, select one of the following options:
• Static IP Address—Select this option to assign a static or fixed IP address
to the access point.
• Automatic Configuration—Select this option to automatically configure
the IPv4 network settings of the access point using a DHCP server on your
network. Also select this option to automatically configure the IPv6 network
settings of the access point using an IPv6 RADVD device enabled on your
network.
But i think it is just a brigde, hence your DHCP server is external to the device.
So you have nothing to disable so to speak:
From the Frequently Asked Questions, in the above PDF:
Q. Can the access point act as my DHCP Server?
No. The access point is nothing more than a wireless hub, and as such
cannot be configured to handle DHCP capabilities.

Similar Messages

  • Is it possible to disable DHCP on Airport when using PPPoE?

    Hi,
    I wish to use the Airport to dial PPPoE and act as a router but I want it to use a static IP address and use my DHCP server.
    Is it possible to set this up?
    Currently the router mode option is set to "NAT and DHCP" but is greyed out so that I cannot change it..

    Sorry, but it is not possible to do what you ask when the AirPort is configured to connect using PPPoE settings.

  • I cannot seem to control the Find Bar. It pops up and tries to search when I type in most any field (google, passwords, etc.) . I hit escape every time to make it stop. This is annoying. Is it possible to disable or uninstall this feature?

    * Firefox 5.0
    * Windows 7

    You can use the Tab key to select a search engine on the bottom bar and press Enter to use the search engine to do the search.
    *https://support.mozilla.org/kb/Search+bar
    In the current Firefox 34 release there is a new "one-off" search bar.
    This search bar doesn't show the name of the search engine and a logo.
    You can type one letter to make a drop-down list appear where you can see suggestions and see the used search engine and that also has bar at the bottom where you can select other search engines that are enabled via the Search tab in Options/Preferences.
    You can use the Tab key to select one of the other available search engines and press the Enter key to search with the selected search engine.
    Click the search engine icon and click "Change Search Settings" to open the Search tab in Options/Preferences (positioned between Tabs and Content) to select the default search engine and select which search engines to show in the search bar drop-down list that opens when you start typing search terms.

  • Disable DHCP on my iPhone?

    When I first got my iPhone it connected to my home wifi fine. Now when my internet is working fine on my PC, as soon as I enable wifi on my iPhone it causes the internet to drop out, and I get a message about there being an IP address conflict. From what I have researched so far, I believe it is because both my wireless router and my iPhone have DHCP enabled, which can often cause IP address conflicts.
    How do I disable DHCP on my iPhone so I stop getting IP address conflicts when connecting the iPhone to my home wifi?

    Hmm i don't think the router is the problem as I have 2 laptops and a windows phone working on wifi, so it is definitely capable of assigning more than one IP address... If anyone else is havin this problem I did solve the problem by enabling Wi-fi in general settings and then hitting the blue arrow next to the network I was having issues with... Dhcp is the default setting, but I wanted to disable dhcp for this particular network and assign an ip address manually... You do this by selecting the static option, then copying all details from the dchp section into the static section... The only thing I changed was the last digit of the ip address... Changing it from a 4 to an 8... All the other settings I kept the same and now my wifi is workin perfectly on the iPhone and still working on the computers... Has been working for 12 hours now And hopefully will continue to work!

  • Is it possible to disable "VERSIONS"?

    i actually don`t like this feature. So is it possible to disable VERSIONS?

    This is so simple. Just don't use an app that supports Versions. Right now that means use any Word Processor except  TextEdit and Pages. Any Spreadsheet except Numbers. (See a pattern?) That's it. That's all. Other apps don't access the feature so use one of those.
    The amount of space required for the feature is minute. It doesn't save the whole document, just records the changes in database. So there is no storage hog even for so-called "power users" (whatever they are)
    As for the person who is  - do I understand this correctly - afraid they'll forget to save on Window because they don't have to save on macs? Really? This is a reason? How about you just continue to save on th Mac like you've always done. Make no difference.
    How adding an auto-save feature to the OS constitutes "dumbing down" is beyond me.
    So, to be clear: this feature is available in the OS for apps that choose to implement it. Apple have chosen to implement it for their Apps. No reason to assume that MS or Adobe or Whoever will implement it, but if they do then write to them and ask them to make it optional.
    Or, just be rational about it.

  • Is it possible to Disable Right Mouse click In WebDynpro Java Application??

    Dear Experts,
    Is it possible to Disable Right Mouse click In WebDynpro Java Application??
    If yes then kindly suggest how.
    Warm Regards,
    Upendra Agrawal

    What is the use-case?
    Armin

  • Firmware update 7.5.2 is breaking workaround for disabling DHCP server

    If you are using the trick described here (http://discussions.apple.com/thread.jspa?threadID=121990) to disable DHCP, you should know that after upgrading to 7.5.3, it will not work anymore. Downgrade to 7.4.2 makes it working again.
    If somebody from Apple is reading this (and is interested in feedback, which I doubt, because there's no such option on the Support pages) - would it be possible to add an option to the AirPort configuration which would allow DHCP to be turned off (while NAT stays turned on)? It would be really nice...

    Hmm, while typing previous message it gave me the following idea (and it worked)
    Since i am using a mac mini as a server ( Debian, sorry ) it also has wlan, i set up the server so both are connected (eth0 / wlan0). Default of the dhcp server is to listen to all interfaces and voila DHCP for the wireless devices.
    Hope this can help someone, without the need for downgrading your APE.

  • Disable DHCP Proxy per WLAN - WLC v7.2

    I have a DHCP server on a WLAN that does not support Cisco's native proxy mode. I need to use DHCP bridge mode for that WLAN only.
    How do I disable DHCP Proxy and switch to DHCP bridge mode for one WLAN ?
    Thanks

    Hello Stephen.
    How is this behaviour in 7.5? It's weird because in the individual interfaces you might change the value, but it doesn't get accepted. So it still seems that it's a global setting... but then: why showing this item to be changed on each interface?
    Kind regards,
    Flavio.

  • Lumia 800: Is it possible to disable the tactile f...

    How can we disable the vibration when you push the back, home or search button of the Lumia 800?
    Is there a way to do it like e.g. the way to enable the hidden diagnostics? ##___#, where ___ are 3 numbers.
    I don't need this kind of tactile feedback, because the screen already shows the response and I don't like the feeling. It could also save some of the precious but poor battery life. 

    Hey
    I asked Microsoft on this issue, and they say it is up to you to disable the feedback.
    http://answers.microsoft.com/en-us/winphone/forum/wp7-wpdevices/lumia-800-is-it-possible-to-disable-...
    Anyway, can I return my Lumia 800 because of this feature is simply unacceptable. I would rather buy an iPhone.
    But should you provide a solution to disable this feature, then I am a happy customer.

  • Is it possible to disable OS5 from iPhone4?

    Is it possible to disable OS5 from iPhone4?
    I'd like to come back to the 4.3 version.

    Since Apple supposedly dooesn't monitor these forums anyway, they aren't supplying any help in the first place. I say, if an Apple update broke something (see post on broken SIM after upgrade to iOS5 as one example) the user SHOULD be allowed to downgrade their product to it's last known working state. It is utterly shameful that a company would rather watch their customers suffer than help them out of a bind with a slightly unorthodox solution, or even a perfectly reasonable solution like RESTORING FROM BACKUP! Even if it is an older OS.
    Bertrand my friend, I am sorry I do not have a solution for you. I don't know "how" to downgrade but my guess is it involves a jailbreak of some kind, which kind of stinks (I'm not a fan of jailbreaking personally).

  • Is it possible to disable multiple logins?

    Is it possible to disable multiple logins by the same user on different computers? I have network hosted user accounts. I need a way to NOT make it possible for user A to go to client Mac A, login and leave himself logged in there then go to client Mac B and login there also. This is creating some unpleasant effects on the server - naturally!
    Any easy way to accomplish this? Perhaps through Profile Manager?
    Thanks!

    Simon,
    Thanks for the reply but I need some elaboration.... "the "Login" preferences for users and groups".... what exactly are we referring to? I don't see such option (or atleast the way it's written), in either Server app or Profile Manager. Are we talking about the same OS X version?
    Thanks.
    P.S. Despite the fact that I have enabled the option in Profile Manager to logout all users on all computers after 30 minutes of inactivity, I have noticed that the iMac clients don't log out the users after the said time...

  • Is it possible to disable the 'edit layout' link on the record detail page

    Is it possible to disable the 'edit layout' link on the record detail page? Not the homepages, I know there is a switch for that, but I thought there was one for the detail pages?
    I want to disable this as I dont want users saving their own layouts, they must stick to the related sections defined in the default layout. The problem is that if they are to have access to certain related lists when an opportunity is of a certain type but NOT other types. If they have saved the layout (using the 'Edit Layout' link), and change the record type, they will see related sections that have been set to 'Not available' in the default layout (ie step 4) for that 'type'.

    Robbo, at this time it not possible to disable the Edit Layout on the record detail page.

  • Is it possible to disable the screen saver for a certain app?

    Is it possible to disable the screen saver just while a certain application is running?
    The app seems to crash when the screen saver comes on.
    Just so you know, application I'm using is Hogwasher; a newsgroup reader.

    Not really. Just disable it manually when you run that application. Then, send off a bug report to the app's developer and tell him to update it for the latest Tiger. Alternatively, use another newsgroup reader.

  • Possible to disable crtl+alt+del button on HP Slate 500?

    Hello
    I was wondering if it is even possible to disable the crtl+alt+del button on HP Slate 500? As my company has me reviewing the unit to be possibly used within our company but one of the requirements is to be able to lock the tablet down. And one of the things they want is to prevent people from being able to use the crtl+alt+del to access task manager since the plan is to lock windows to one open application. But I can't see any settings in the bios to disable that button. And there are no oblivious options I can find on the Slate and the button does not appear to be controlled by a priority HP software product. The only other way I could think of doing it would be to somehow disable it from the registry.?

    This can be done using the Pro version or higher of windows 7, using gpedit and/or administrative templates you can control everything a user account can do or not do.
    gpedit.msc in a run command opens the group policy editor
    http://technet.microsoft.com/en-us/library/cc753298.aspx

  • ICloud - is it possible to disable that feature after downloading Maverick OS X?

    I have a Mac desktop with OS X 10.8.5 and an iPhoto library of 10,500 photos. The version of iPhoto is 8.1.2 and there has been some 'conflict' between the two so apparently I have to first dowload the latest OS X (Maverick) so I can then down load the newest iPhoto version ( 9.5.1).
    I note the iCloud feature in Maverick and am simply wondering that after I have completed the download is it possible to DISABLE the iCloud feature?
    Any assistance will be greatly appreciated. Cheers … David

    The iPhoto Library can be backed to to any external HD as long as it is formatted OS X Extended (journaled).  So make sure you WD SmartDrive is formatted as such.  You don't need any WD software to access such a HD drive if it's formatted correctly for Macs.
    Just drag the entire iPhoto Library package to the EHD for a one time backup.  To keep it current you can use an external HD with Time Machine or use a backup application that can do incremental backups, i.e. backing up only new or modified files after the first full backup.  Apps like Synk Pro and Chronosync can do incremental backups.

Maybe you are looking for