Kindly let me know if there are special discount offers available for IBM employees ?
Kindly let me know if there are special discount offers available for IBM employees ?
Many companies have EPP (Employee Purchase Programs) with Apple. You need to check your benefits programs offerred by IBM. It will basically be a URL to an EPP login page for the Apple Store.
NOTE: I do not think there is any discount on iPhones.
I have observed that the discounts tend to be around 8% on Pro equipment and 6% on consumer products. But some items the discounts vary depending on the product. And in some cases there is no discount.
Again, check with your IBM benefits.
Similar Messages
-
Is Apple providing any karaoke service such as selling karaoke software, whole set of karaoke hardware or even karaoke store? If yes, please give me information on this; If no, let me know if there are similar karaoke services providing in the future.
No, Apple does not. What other companies might provide what you're looking for I don't know. Try searching the web for "karaoke software" or something similar.
Regards. -
OSD Task Sequence fails with "There are no task sequences available for this computer"
Let me preface this by saying that I have read at least 100 forum posts with people having similar issues. However, none of the solutions in those
posts have worked for me.
The Problem: SCCM 2012 R2 will not image unknown computers.
The task sequence gives the error "There are no task sequences available for this computer." As soon as that error occurs, SCCM places an Unknown entry into the All Systems collection. I have been imaging unknown computers, without fail, for
4 months and no environmental changes have been made. NOTE: I am using USB media, not PXE.
What I've Tried:
Checked for duplicate SMSBIOS GUIDS in the console, none.
Checked for duplicate MAC Addresses in the console, none.
Checked for expired certificates, none.
Recreated Boot Media, twice.
Deleted the Unknown entry and retried, SCCM just recreates the Unknown entry.
Deleted all of my task sequence deployments, and then redeployed them each to All Systems (Only Boot Media and PXE) and to Unknown Systems (Only Boot Media and PXE)
I have also ran the following in the SQL Server Management Studio;
SELECT
* FROM
ResPolicyMap WHERE
machineid = 0 and
PADBID IN
(SELECT
PADBID FROM PolicyAssignment
WHERE BodyHash
IS NULL)
No result
Select
* From
vMacAddresses Where
MacAddresses = '00:00:00:00:00:00'
This displays an entry for every time that I have tried to image the unknown machine attached to the MAC Address with a different ItemKey and SMS_Unique_Identifier for each entry.
Added the machine manually using Import Computer Information, immediately recognized the Task Sequences that I have advertised to the All Systems collection.
Any and all assistance is welcome, I am going on the third straight day of dead ends. Below I have tried my best to post the entire SMSTS Log;LOGGING: Finalize process ID set to 744
==============================[ TSBootShell.exe ]==============================
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Debug shell is enabled
Waiting for PNP initialization...
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(1)\SOURCES\BOOT.WIM
WinPE boot path: C:\SOURCES\BOOT.WIM
Booted from removable device
Found config path C:\
Booting from removable media, not restoring bootloaders on hard drive
C:\WinPE does not exist.
C:\_SmsTsWinPE\WinPE does not exist.
Executing command line: wpeinit.exe -winpe
The command completed successfully.
Starting DNS client service.
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
The command completed successfully.
==============================[ TSMBootStrap.exe ]==============================
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL'
Current OS version is 6.2.9200.0
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH
Failed to open PXE registry key. Not a PXE boot.
Media Root = C:\
WinPE boot type: 'Ramdisk:SourceIdentified'
Failed to find the source drive where WinPE was booted from
Executing from Media in WinPE
Verifying Media Layout.
MediaType = BootMedia
PasswordRequired = false
Found network adapter "Intel(R) Ethernet Connection I217-LM" with IP Address XXX.XX.XXX.XXX.
Running Wizard in Interactive mode
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Activating Welcome Page.
Loading bitmap
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Spawned thread 1008 to download policy.
Entering TSMediaWizardControl::GetPolicy.
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
Setting LogMaxSize to 1000000
Setting LogMaxHistory to 1
Setting LogLevel to 0
Setting LogEnabled to 1
Setting LogDebug to 1
UEFI: false
Loading variables from the Task Sequencing Removable Media.
Loading Media Variables from "C:\sms\data\variables.dat"
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Setting SMSTSMP TS environment variable
Setting _SMSMediaGuid TS environment variable
Setting _SMSTSBootMediaPackageID TS environment variable
Setting _SMSTSBootMediaSourceVersion TS environment variable
Setting _SMSTSBrandingTitle TS environment variable
Setting _SMSTSCertSelection TS environment variable
Setting _SMSTSCertStoreName TS environment variable
Setting _SMSTSDiskLabel1 TS environment variable
Setting _SMSTSHTTPPort TS environment variable
Setting _SMSTSHTTPSPort TS environment variable
Setting _SMSTSIISSSLState TS environment variable
Setting _SMSTSMediaCreatedOnCAS TS environment variable
Setting _SMSTSMediaPFX TS environment variable
Setting _SMSTSMediaSetID TS environment variable
Setting _SMSTSMediaType TS environment variable
Setting _SMSTSPublicRootKey TS environment variable
Setting _SMSTSRootCACerts TS environment variable
Setting _SMSTSSiteCode TS environment variable
Setting _SMSTSSiteSigningCertificate TS environment variable
Setting _SMSTSStandAloneMedia TS environment variable
Setting _SMSTSSupportUnknownMachines TS environment variable
Setting _SMSTSTimezone TS environment variable
Setting _SMSTSUseFirstCert TS environment variable
Setting _SMSTSx64UnknownMachineGUID TS environment variable
Setting _SMSTSx86UnknownMachineGUID TS environment variable
Root CA Public Certs=
Missing root CA environment variable from variables file
Support Unknown Machines: 1
Custom hook from X:\\TSConfig.INI is
No hook is found to be executed before downloading policy
Authenticator from the environment is empty.
Need to create Authenticator Info using PFX
Initialized CStringStream object with string: 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A;2014-07-16T18:15:39Z.
Set media certificate in transport
Set authenticator in transport
CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXX.XXXXXX.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
Request was successful.
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
Default CSP Type is 24
New settings:
site=XXX,XXX, MP=http://XXXX.XXXX.com, ports: http=80,https=443
certificates are received from MP.
Unknown machine GUIDs: 774b17a2-6eeb-44bc-9c94-ce9081f5fe4c 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
MP specific X86 unknown machine GUID is received at run time
MP specific X64 unknown machine GUID is received at run time
Getting MP time information
Set authenticator in transport
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 406, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Current time: 2014-07-16 18:15:39.787 TZ:Pacific Standard Time Bias:0480
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
Adjusting the system time: -14400.551 seconds
Time zone info set to: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
New time: 2014-07-16 14:15:39.235
Current time: 2014-07-16 14:15:39.231 TZ: Bias:0300
Downloading policy from http://XXXX.XXXX.com.
Initializing HTTP transport.
Setting URL = http://XXXX.XXXX.com.
Setting Ports = 80,443.
Setting CRL = false.
Setting Server Certificates.
Set authenticator in transport
Setting Media Certificate.
Preparing Client Identity Request.
Setting transport.
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Setting site code = XXX.
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
Setting SMBIOS GUID = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
Adding MAC Address XX:XX:XX:XX:XX:XX.
Executing Client Identity Request.
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 415, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Client GUID = , Netbios name = , State = Known
Using unknown machine GUID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
Computed HardwareID=2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Hardware ID: 2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Preparing the Client DDR Message
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Sending the Client DDR message.
Sending Report
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:26717327-194f-4cd6-90ba-309998c058f2</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140716141539.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryAc
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
Submitted new client identity: GUID:26717327-194f-4cd6-90ba-309998c058f2
Preparing Policy Assignment Request.
Setting transport.
Setting site code = XXX.
Setting client ID = 74f16942-dd75-437f-8c4b-2a5de4d0e5e5.
Setting site signing Certificate.
Setting SiteSigningCertificateContext
Executing Policy Assignment Request.
Sending RequestAssignments
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 274, uncompressed size 662.
Request client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Response client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Retrieving Policy Assignments:
Successfully read 0 policy assignments.
Retrieving collection variable policy.
Found 0 collection variables.
Retrieving machine variable policy.
Found 0 machine variables.
Setting collection variables in the task sequencing environment.
Setting machine variables in the task sequencing environment.
Exiting TSMediaWizardControl::GetPolicy.
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
No assigned task sequence.
Setting wizard error: There are no task sequences available for this computer.
Skipping Confirmation Page.
Skipping Task Sequence Selection Page.
Skipping Variables Selection Page.
Skipping Resolve Progress Page.
Activating Finish Page.
Loading bitmap
Executing command line: X:\windows\system32\cmd.exe /k
The command completed successfully.
Successfully launched command shell. -
Is there a special discount in software for students
is there a special discount in software for students studying in this area?
… you can get a 20% discount:
You'll notice here&then as a promotion special discounts for iTunes gift-cards. Elelctronic suppliers, super-markets, Walmart, even drugstores often offer 50€ gift-cards for 40€!
(for readers in Germany; actually Lidl offers 20% off)
Load the credit to your account => happy shopping -
There are no active responsibilities available for this user
Hi Guys...
I am not technical person... but wanted to if anybody has experienced the following problem:-
When logging into any account i get the following message:- There are no active responsibilities available for this user
No i have looked the threads posted and most advise to run the WF_SYNCHRONIZE_LOCAL_TABLES concurrent request.. if i run this through toad or UNIX as i can’t get into forms i always seem to get the following message which could be playing a part in my initial problem.....ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
When i also query the following table Fnd_User_Resp_Groups i also get the following message: ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
any help would be most welcome......
BalIs the system in maintenance mode, by any chance ? You put the app in maintenance mode when applying patches. If you connect as the apps database user, what does this sql statement return ?
select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
MOS Doc 400151.1 - After Login Receive Error: 'There are no active responsibilities available for this user'
If the system is not in maintenance mode, you only option would be to open an SR
HTH
Srini -
Is it possible to customize line spacing in Pages 5.5.3? My previous Pages 2.0.2 allowed me to choose spacing in 0.1 increments, but as far as I can tell Pages 5.5.3 only offers four options. Very limiting for creative documents.
Hi Margaret,
Does this work for you?
And 0.6
Or 1.6
Please call back if this does not help.
Regards,
Ian. -
Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.
Since other millions of people updated and do not have that problem - it means one of two.
1.Your friends lied to you and do not have that problem and in that case only your installation of ios7 got corrupted and you need to restore your phone.
2.Your friends didn't lie to you and all 4 of you need to restore phones (that way reinstalling ios 7 properly)
here are instructions for restore and you may have to backup before restore.
iTunes: Restoring iOS software - Support - Apple -
Kindly let me know the transaction for checking the Status of par.User?
Kindly let me know the transaction for checking the Particular Users Status?
I mean to say,Which Transaction is he into?
Or Is he/She Logged on to a particular System?
Regards,
Shashank.Hi,
Go to Transaction SM04.You will find the List of Users And the List of transactions ther are currently using.
Regards,
Sujit -
I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?
yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this. -
HAI SD EXPERS KINDLY LET ME KNOW
HERE ARE SOME INT QUESTIONS , KINDLY LET ME KNOW THE ANSWERS
1.In a sales order, if you want to give rs 10000 more than the credit limit to your customer how do you process this scenario
2.Mention some latest tickets L1 solved in ur support project
3.how will u configure batch jobs
4.what are the fields in purchase requisition
5.what is RMA process
6.how you will create nodes in customer hierarchy
7.suppose you want to offer two different materials as free for one material , how do u process this
8.you find terms of payment in two pages in customer master data, what is the role of the two
9.what is the difference b/n item cat group and general item cat group found in material master
10.what is the link b/n pricing procedure and credit management
11.what is as is & to be process
12.tell me about your experiences in support & imp projects
13. what do u know abt documetation and how u have done that in ur project
14.diff b/n user exits and enhancements
15.If the business offer diff rates on the material basing on the quantity, and the break up should appear in the sales order which carries the net value how do u customize this
THESE ARE VERY MUCH PRACTICAL KINDLY EXTEND UR HELP
KISHORE
[email protected]1.In a sales order, if you want to give rs 10000 more than the credit limit to your customer how do you process this scenario
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
Check which credit control area is assigned to the company code.
Company code:
Credit control area:
2. Transaction OVFL
Check which credit control area is assigned to the sales area.
Sales area:
Credit control area:
3. Transaction XD02 or VD02
Check which credit control area is assigned to the payer.
Payer:
Credit control area:
4. Transaction SE37
is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
OB45, or the credit control area must be entered under the relevant company code in table
T001CM of the credit control areas allowed.
Company code:
Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
which settings do exist for the sales document type used?
Sales document:
Check credit:
Credit group:
8. Transaction OVAD
which settings do exist for the delivery type used?
Delivery type:
Credit group for delivery:
Credit group for goods issue:
9. Transaction OB01
Credit management/Change risk category
Definition of the risk category for each credit control area. This risk category can be
assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
Here, the individual credit checks for key fields
o credit control area
o risk category
o credit group are set. Take these key fields from the above settings and go to the detail
screen. In particular, check whether fields "Reaction" and "Status/block" are set
correctly. To carry out follow-up actions in case of a credit block, the credit check
status must be set (field "Status/block").
11. Transaction FD32
Credit master data for the payer of the relevant document.
Credit account:
Credit limit:
Risk category:
Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
check (static or dynamic credit limit check).
13. Transaction OVA7
Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
field "Active receivable" in Transaction VOV7.
Item type:
Active receivable:
14. Transaction V/08, Pricing
In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
determining the credit value (mark the pricing procedure and double-click on "Control").
Usually, the net value plus taxes is used. This way the system is determined to use this
subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
update and credit check.
You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
Pricing procedure:
Line with subtotal = 'A':
15. Transaction OB45
which update group (field "Update") do you use in the relevant credit control area? The
default setting is "12". If you use another update group, check whether this is fine with
you. If you open an OSS message, please tell us the alternative update group.
Credit control area:
Update:
16. Transaction OMO1
which kind of update did you choose for structure S066?
In any case, "Synchronous update (1)" has to be chosen as the kind of update.
All other settings will lead to errors.
4.what are the fields in purchase requisition
http://www.olemiss.edu/projects/sap/Purchasing-_New_Required_Fields_on_PR_and_PO.pdf
5.what is RMA process
Return Materials Authorization
6.how you will create nodes in customer hierarchy
All the customizing is in SD/Master Data/Bussiness Partner/Customers/Customers hierarchy
1) Define hierarchy type: just put and ID and a name to the new hierarchy.
2) Set partner determination: if you want to user the hierarchy in price determination, then, in the orders, at the header level, you have to have a Partner Procedure with a partner function for each level. In the partner procedure, in each partner function you must indicate the source partner function. With this informacition, in the order, you obtain the bussiness partner for each partner function.
3) Assign acount groups: you indicate which accounts groups are allowed for being part or your hierarchy.
4) Assign sales areas: symple you indicate wich sales areas are allowed in your hierarchy. (Here you can customize common sales areas, just for not having to build de hierarchy in all the different sales areas).
5) Assigning hierarchy type for pricing: you indicate which classes of documentos uses hierarchy in pricing determination.
It is possible to maintain so called customer hierarchies. This might be useful when for example you create a condition discount for a customer that is part of such a hierarchy structure. All subnodes in the hierarchy below that customer, will thus receive the same discount.
Customer hierarchy setup, firstly decide the hierarchy type to be used.
The standard is type A.
You can also assign a partner function to the customer so that the higher level customer in the hierarchy is copied into a sales order as a partner function - but you don't need that right?
Next assign your customer account group to the hierarchy type. And enter the combinations that will be allowed for creating the hierarchy.
You want to assign a ship-to to a payer. So enter the ship to account group and enter the payer account group as the higher level.
You must also make an entry for permitted sales area assignments. So if you want to a hierarchy for customers in the same sales area then enter the sales area and enter the same one as the higher level sales area.
All these settings can be found in the IMG. Under SD - master data - business partners - customers - customer hierarchy
7.suppose you want to offer two different materials as free for one material , how do u process this
Free goods processing - Exclusive method -
Kindly let me know how to customize ESS Screens
Hi,
I configured NWDI, created Track. I got all DC's in nwds.
I created a proj and opend it through WebDynpro. Each proj having min of 3-5 Components.
I hav seen all the component views. When i execute an application the output what i m gatting is different from what i hav seen views of different components
I didnt find frm wer this view is coming.
for eg, here i opened proj EPD_ESSDev_Dessinaddrsap.com
this proj is having below components
CcPerAddressIN
FcPerAddressIN
VcPerAddressINDetail
VcPerAddressINOverview
VcPerAddressINReview
Kindly let me know how to customize this?
Regards,
VenkatHi Snehal
Here is the references,
WebDynpro Component :FPMComponent - com.sap.pcuigp.xssfpm.wd
Interface View :FPMComponentWindowInterfacView
Startup Plug :Default
But in my proj there is no component with the name FPMComponent - com.sap.pcuigp.xssfpm.wd
, then from where this is taking...
kindly guide me
ThankQ -
Hi, kindly let me know the mode of payments for apps from apps store applicable from India.
The valid payment methods should show on the payment details screen on your account - in India they are Visa, MasterCard and AmEx
Credit cards of those types should work, if you try to use a debit card then it might not be accepted, not all debit cards appear to work in India e.g. Re: can i download from itunes using debit card in india ? -
I am not able to open a javascript pop up mapped from RH 8 in IE and chrome browser . Kindly let me know an easy solution.
Thank youHi,
What output are you using? WebHelp?
If WebHelp, you may need to amend the way you call the help. You can add the option newwnd=false to ensure that RoboHelp doesn't open the help in a popup. See http://www.wvanweelden.eu/articles/part/regular-start-page for details.
Greet,
Willam -
Please, let me know if there is any equivalent in Apple Ipad of AdobeReader pdf.
There is an Adobe Reader available in the App Store:
https://itunes.apple.com/us/app/adobe-reader/id469337564?mt=8
There are several other apps which can handle PDFs as well. -
i've downloaded some free games for my iphone4 but they are using my internet because they have ads. does anyone know if there are any games that don't have these ads and don't require internet AT ALL?and if i disable my internet connexion, does it help?
Thank you. I put it in airplane mode like you suggested, but it looks to me like all the applications and ads are still running. Anyway, I'm just gonna play when I'm really really bored and use them as less as possible. Thank you again for your quick answer.
Maybe you are looking for
-
GR IR value was showing difference. in between quantity received and quantity invoiced .
-
Hi, How to create a INDEX on a DSO and how does it improve dataload performance Thanks
-
My AppleTV says my AppleTV software is up-to-date but it is not how do I fix this?
Is anyone having problems downloading the new Apple TV software six
-
Cover Flow Help, please!
I'm having trouble with "cover flow" on my new macbook air (and had the same problem with my old macbook). I view my old photos in "cover flow" format in finder, but it has stopped working properly. The photos are all pixely and don't reflect rotat
-
Aperture 3 deleting original files
I use a "referenced" library system. So I do not import the images into aperture but leave them on an other drive and only have the previews stored with Aperture. After deleting the "Master Image and Previews" I still find the original RAW files in o