Kinect for windows speech basics : could not find kinect speech

hello
i am try to run the basic example of sdk 2 for kinect
but i get this message:
could not find kinect speech recognizer....
any solution
sdk 2 for kinect install
sdk speech and language pack enUs and itIta install
any solution??

hello am new to the forum ...
I need a good tutorial on voice recognition kinect for windows sdk 2
I tried the basic example of the SDK but I ridponde: Could not find kinect speech recognizer.....
any solution??
i have install:
kinect sdk 2 for win
speech sdk and language pack ita and en

Similar Messages

Windows 8.1 - Could not find recovery environment

Hello,
So I bought a refurbished lenovo k450 which is this one http://www.microcenter.com/product/428498/k450_desktop_computer except mine has 8gb instead of 12gb, So I'm trying to factory restore my pc and It tells me "Could not find recovery environment" And nothing happens.

Hi Ninja0347,
Welcome to Lenovo Community Forums!
Can you try Turning Off the computer completely
Now Turn it back ON and start hitting F2
It should boot you to recovery or atleast Give you option to boot to the Recovery Image.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Windows (8.1) could not find back up devices while creating a system image (0x80070003)

I am trying to create a system image backup under Windows 8.1 Windows Backup is unable to find a backup device with error (0x80070003). No drives are shown under "On a hard disk" and select <Refresh> gives the same error.
A LaCie 1Tb external harddisk is connected to the PC and formatted as an NTFS drive. The hard disk is visable under Harddisk Management and shows up under Explorer mapped as Drive D:
Any thoughts?

Hi,
As you mentioned, the Drive D is mapped from your external harddrive. How did you connect this hard drive into this computer?
If it was connected via network, Please choose "On a network location" and locate the harddrive to check the results.
Kate Li
TechNet Community Support

Graphics will not load for map view error: Could not find default.styleproto in framework

Hey there,
I am trying to load a mapview using Mapkit and everything was working a week ago. When I got the update for 4.5 for xcode all of a sudden the mapview would not load properly. It seems to pin point on my location properly but there is no graphics. I have made sure that my .mapType is set properly and I have looked at all the other settings. Also a project that uses mapview on another computer gets the same problem I am getting, it seems I have lost this file "default.styleproto" from somewhere.
If it helps, I had problems with my first download of xcode, I had two versions some how running on my computer so I ran a command line script to erase everything to do with xcode so I could download a new copy and start from fresh. It seemed to have deleted my "developer" folder for my apps.
Thanks in advance

I had the same problem and the map wouldn't work at all. The files should be in the folder
~/Library/Application Support/iPhone Simulator/[6.0 and above]/Library/Caches/GeoServices/Resources
In my case I had 3 styleproto files in there including [email protected] which I duplicated and renamed to default.styleproto. Now the map works but all the icons are @2x size, which is very annoying. I thought of using the default.styleproto file from a different computer but it didn't have it either.
Any real solution to this?

Could not find used public part

Hi all,
I created a new product in the composite designer with a few Visual Composer Interfaces.
Because our context model changed, I deleted the existing UI, and created a new VC UI (generated from a Process model)
When I want to build everything, I get the exception:
ERROR: Check for used DCs failed: Could not find used public part "40dbb712586011df82d500059a3c7800" of test.com/product/ui/vc (PRODUCT_SC) : Used public part not available (Used public part not available)
Build failed with errors.
Apparantly the guid from the old VC UI was not completly removed.
I found that GUID back in files:
.dcdef
PublicPartFileList.xml
and changed those to the new guid.
But still having the same problem...
Can I change this in another simple way?
regards,
Hans

Hi Hans,
could you switch to the Development Infrastructure perspective and open the view called Component Properties for the VC DC? Most likely the generated public part is still present. I guess you can simply delete it as the corresponding component has been deleted as well.
This public part should be present for the DC of type "Visual Composer Composition Unit Interface".
Which version of the NWDS are you using? I think what I´m describing is actually only a workaround, but would think that the pulblic part deletion should have happened automatically.
Best regards,
Stefan

[WARNING] skipping exception constructor for java.io.IOException: could not

Hi,
this is happening in osb server output:
[WARNING] skipping exception constructor for java.io.IOException: could not find property corresponding to ctor param 'arg0' on public IOException(java.lang.String,java.lang.Throwable)
[EarFile] Application File : /opt/Oracle/Middleware/user_projects/domains/tests/sbgen/alsbejbtransport/95105653848417/build/ear/META-INF/application.xml
[WARNING] skipping exception constructor for java.io.IOException: could not find property corresponding to ctor param 'arg0' on public IOException(java.lang.String,java.lang.Throwable)
[EarFile] Application File : /opt/Oracle/Middleware/user_projects/domains/tests/sbgen/alsbejbtransport/95109698253471/build/ear/META-INF/application.xmlwhat is this?

Yeah -- what is that? I have same issue during application (on OSB) import from jar file.

Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
I have...
...reset
...reinstalled 7.3.1.3 (over and over and over)
...tried different USB ports. (Early on, we saw it once after swapping ports).
...tried turning off the ability of the computer to 'Turn this device off to save power."
I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
But even after having tried everything, I still have an unrecognizable iPod.
When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
Regards. Adam

U401 touch windows 8 audio driver unable to install error could not find divice for this driver

u401 touch windows 8 audio driver unable to 0wau05w8.exe install error could not find device for this driver
kindly advise

hi karthi2lenovo,
Welcome to the Forums.
If the conexant audio drivers from the lenovo website doesn't detect the device, can you try to:
1. Open Device Manager (press Winkey+R > type devmgmt.msc)
2. On the device manager, open Sound, video, and game controllers and Other Devices then check the status (if there's a yellow exclamation mark, error codes, etc.)
3. As an alternative, try this conexant driver from station-drivers:
Conexant High Definition Smart Audio
Version 8.64.59.52 (Win8)
Let me know your findings,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls. Help?

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls for that track (reverb, etc.) Help?

Try this fix posted by Robinson Collins:
Re: I downloaded Garage Band 2x and the same note appears: there is no General Audio 10. Please advise. Thank you.
Try this: Go to your menu bar, select "Garageband" and then "Restore Sound Library..."
It can take awhile to download as it's a pretty big library. You might need to also select "Update Sound Library..." after the restore is done.

How do I install Netgear XE102 on my iMac? It will not install off of the cd provided it appears to be only for Windows based computers. Checked Netgear website and could not find a setup.exe file for Mac.

Unable to install Netgear XE102 on my iMac. Checked Netgear website and could not find a setup.exe file for Mac.

That means either no software needs to be installed on a Mac or the product is incompatible with Macs. Contact NetGear tech support for help.

Error: Could not find compiled resource bundle 'sparkEffects' for locale 'en_US'

I have a multi-module application that I am building in Flash Builder 4.5 Premium.
When I launch the application It starts with a basic login page and looks ok. After logging in, modules and style sheets are loaded dynamically and I get this exception stack trace.
Error: Could not find compiled resource bundle 'sparkEffects' for locale 'en_US'.
          at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()
          at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()
          at mx.core::FlexModuleFactory/installCompiledResourceBundles()
          at mx.core::FlexModuleFactory/docFrameHandler()
          at mx.core::FlexModuleFactory/docFrameListener()
Windows 7
Flashbuilder 4.5 Premium
Compiled with SDK 4.5.1
Flex 3 Compatibility Mode: No
Framework Linkage: RSL
SWC Project Linkage: RSL
Can anyone help me fix this?

I have determined at least that it is the very first style sheet that I am loading into the application that is causing the exception as I modified to not load anything else.
Style sheets are loadingusing this method. FlexGlobals.topLevelApplication.styleManager.loadStyleDeclarations

Adobe Flex 4 Plug-in for HP Quick Test Pro could not find any Flex environment fields (TEAFlex*.xml

Hello all,
When compiling Flex project with QTP automation libraries included (Flash Builder version is 4.5. QTP is 11, Adobe Flex 4.5 Plugin for HP QuickTest Pro is installed) the message as below pops up
Adobe Flex 4 Plug-in for HP Quick Test Pro
Adobe Flex 4 Plug-in for HP Quick Test Pro could not find
any Flex environment fields (TEAFlex*.xml).
OK
After accepting it there is Flex application shown in IE8.
Trying to record actions in the application gives no effect while TEAPluginIE.dll and TEAPluginQTP.dll are loaded during that.
What could it be providing that TEAFlex.xml is in the directory where the TEA* dlls reside?
Have a nice day!

Adobe's official exam guide outlines exactly what you need to know:
http://www.adobe.com/devnet/flex/pdfs/ace_exam_guide_flex4.pdf
I took the Flex 3 ACE recently and found that the guide represents the exam content very well. It looks like there aren't a whole lot of changes in the Flex 4 ACE guidelines.
To answer your questions:
LCDS is not on the exam.
What they expect you to know about the AIR library is very basic. It amounts to simple operation of an AIR app, file system operations, customizing the native window, drag-and-drop, and security. I've never developed an AIR app and got by just fine.
Before taking the exam, I was already quite comfortable with much of Flex. Along the way I learned a few things that I haven't had a reason to touch. I found the exam to be quite easy, but I'm also a computer science guy and has also just experience Java certification which is much more difficult.
I breezed through the Training From The Source book and was happy with it. However, you will do just as well with the LiveDocs for free.

Using Project Settings creates an app.config and dozens of errors about "Could not find schema information for the element...

I am trying to work with Application settings. I would just like to put together a very simple example of using these, but I can't get the most basic example to work. Virtually every tag regarding the new Settings produces an Error "Could not find the schema information for the element "applicationSettings". or the element "Settings" etc. etc. I am not using IIS, this is not a Web Project, and I am not working with User Settings. Just simple read-only Application Settings. I've read every MSDN page regarding this subject, I don't see that I am missing a reference - HELP !!!
REPRODUCING THE PROBLEM:
Step 1. Create a new C# solution and Windows Forms project.
Step 2. Add a reference to System.configuration
Step 3. Right click the project, choose Properties, then Settings.
Step 4. Using the Settings Designer, create ONE setting called "MySetting" as a String with the value "MyValue".
RESULT: Observe the Errors like these, complaining about all of the Settings tags and elements.
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'LoadOriginalLists.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
HERE IS MY APP.CONFIG, AS GENERATED BY THE SETTING DESIGNER TOOL:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
<sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="LoadOriginalLists.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
</configSections>
<applicationSettings>
<LoadOriginalLists.Properties.Settings>
<setting name="MySetting" serializeAs="String">
<value>MyValue</value>
</setting>
</LoadOriginalLists.Properties.Settings>
</applicationSettings>
</configuration>

Ummmm... okay so these are Messages that are in the Error List. Whether or not they are actually Errors is debatable. They are in the Error List, so they are errors.
The application runs, so my question is slightly changed to the following.
I would like to use Application Settings. However, having settings in my app.config pollutes my Error List with a bunch of meaningless messages like "Could not find the schema information for...". These messages then hide real errors.
Am I missing some setting or is there something I can do to make Visual Studio not show me these messages?

RV120W [IKE] ERROR: Could not find configuration for X.X.X.X

All
I setup the RV120W to allow my MAC desktops to connect in over the internet. MAC;s are running IPSecuritas or VPNTracker. Both don't work.
Setup is
Basic VPN Setup Default Values for IKE:
Gateway Policies
Client Policies
Exchange Mode:
Main
Aggressive
ID Type:
Local WAN (Internet) IP
FQDN
Local WAN (Internet) ID:
Local WAN (Internet) IP
remote.com
Remote WAN (Internet) ID:
Remote WAN (Internet) IP
local.com
Encryption Algorithm:
3DES
3DES
Authentication Algorithm:
SHA-1
SHA-1
Authentication Method:
Pre-Shared Key
Pre-Shared Key
Key-Group:
DH-Group 2 (1024 Bit)
DH-Group 2 (1024 Bit)
Lifetime:
8 Hours
8 Hours
Basic VPN Setup Default Values for VPN:
Encryption Algorithm:
3DES
Authentication Algorithm:
SHA-1
Lifetime:
1 Hours
PFS Key Group:
DH-Group 2 (1024 Bit)
NETBIOS:
Enabled (Gateway Policies)
Disabled (Client Policies)
When my clients try and login. All I see in the logs is
011-11-28 10:05:43: [rv120w][IKE] ERROR: Could not find configuration for 212.183.140.51[65212]

The error that you are getting that shows in the log file by the "pings being blocked" it refers to the connection being block by the firewall or security on your computer.
Things that you should look for is: What type of internet security software you are using will a lot of the time block QVPN from working.
With Windows 7 it has a lot of added security so the windows 7 Firewall has to be on because soon as the firewall is turn off or another firewall is loaded that turns off Win7 firewall, the Win7 OS turns off IPSEC and that is needed for quick VPN to work. Hope this has been helpful and gave you some more understanding.

Could not find installation information for this machine contact applecare

I installed Lion on my MacBook, worked great. After 2 months I wanted to clean install the Lion on the same Macbook; went to Apple Support website and there they had instructions on how to clean install Lion.
I followed the instructions and erased the partition where the OS Lion was installed. Then I tried to re-install it, it kept saying "could not find installation information for this machine contact applecare".
When I contacted apple care, they asked me to pay 49 dollars in order to get help from them. I already paid the cost for the LION OS and now they want another 49 bucks. This is just insane. I'm not a fan of Apple, Mac or iCrap. But I was thinking to buy a new Mac after selling this one. Now I have no interest in buying any Mac product. Windows 7 is much much better than Lion OS X.
I have to fix this before I sell it on ebay so Has anyone tried to clean install Lion ?

I'm with you, OS X Lion has turned a lot of stomachs.
Here's how to go about what you need to do:
Get out your 10.6 installer disk, make sure it's clean and polished (bit of rubbing alcohol and a very soft cloth)
Get 2 blank external drives, connect one and hold c and boot off the 10.6 installer disk, use Disk Utility to format the external drive use
Erase>Security Option> Zero all data, wait
under the partition tab
1 partition, option MBR, format FAT
Disconnect and reboot.
Repeat the same procedure for the second drive and format the
Erase>Security Option> Zero all data, wait
under the partition tab
1 partition, option GUID, format OS X Extended Journaled
Quit and install 10.6 on the external GUID drive.
Reboot holding the option key, you can boot off the 10.6 external drive, setup, use your same user name as before, update to 10.6.8, grab your files off the OSX Lion partition, transfer a copy to the FAT formatted drive.
What you do is your choice,
To continue using the machine under 10.6
you can erase the entire (select the whole internal drive, not just the OS X Lion Paritition) and use Carbon Copy Cloner to clone 10.6 external to the internal drive,
To sell the machine with a fresh 10.6 install
or simply hold c boot off the 10.6 installer disk and install 10.6 on the internal drive and upon reboot, just hard shutdown by pressing the powerbutton before going through setup. The next person who gets the machine will be greeted by the setup again.
You can use the files on the FAT drive on your Windows PC in some cases.
Else download the free LibreOffice and it can read quite a few file formats.

Kinect for windows speech basics : could not find kinect speech

Similar Messages

Maybe you are looking for