Kinect for Windows v2 vs Kinect for Xbox One

I have found the official page (http://www.microsoft.com/en-us/kinectforwindows/meetkinect/features.aspx) that
describes the hardware specifications for Kinect
for Windows v2. But I cannot seem to find the hardware specification for Kinect
for Xbox One. I just want to know if there is any difference in hardware specification between these two devices
and if there are features, that are supported by the SDK 2.0 only for specific version?

Actually there is one slight difference with IR, as found here:
http://channel9.msdn.com/coding4fun/kinect/Determining-Kinect-Capabilities-at-Runtime
Sr. Enterprise Architect | Trainer | Consultant | MCT | MCSD | MCPD | SharePoint TS | MS Virtual TS |Windows 8 App Store Developer | Linux Gentoo Geek | Raspberry Pi Owner | Micro .Net Developer | Kinect For Windows Device Developer |blog: http://dgoins.wordpress.com

Similar Messages

  • Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng

    Can any one help me with Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng? I'll be very grateful for any answers
    This question was solved.
    View Solution.

    Hi:
    You should be able to use the drivers and software from this model on yours...
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6936...
    When you go to install the graphics you have to install these drivers in this order and reboot after each installation.
    1. Intel chipset installation utility.
    2. Intel HD graphics driver.
    3. Nvidia HD graphics driver.

  • I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    Kappy wrote:
    Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
    You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
    http://support.apple.com/kb/DL1638
    Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

  • Installing administrative tools for Windows 10 Technical Preview for Enterprise

    At first I was upgrade my Windows 8.1 to Windows 10 Technical Preview for Enterprise every things done will then
    I try to install administrative tools for windows 10 technical preview for enterprise I found the .msu file from Microsoft website but when I tried to install it, it gives me the following error:
    Windows Update Standalone Installer
    installer encountered and error: 0x8024001d
    is there anyone to help me regarding above issue.
    Thanks
    Zelgay Kunari

    Hi zelgay,
    This is my result:
    From your error code, it seems this is relate to your windows update, please use following command to fix corrupted files:
    DISM.exe /Online /Cleanup-image /Restorehealth
    In the meantime, you can delete temporary update files in the SoftwareDistribution folder:
    Stop Windows Update service.
    Open File Explorer.
    Double-click the local hard disk where Windows is installed, typically drive C.
    Double-click the Windows folder, and then double-click the
    SoftwareDistribution folder.
    Double-click the DataStore folder to open it, and then delete all files and folders in the folder.
    Note If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
    Click the Back button. In the SoftwareDistribution folder, double-click the
    Download folder to open it, and then delete all files in the folder.
    Restart Windows Update service.
    Alex Zhao
    TechNet Community Support

  • IE11 for Windows 7 Globally Available for Consumers and Businesses

    Internet Explorer 11 comes with support for the latest web standards, advanced developer tools and improved security, in order to offer users an enhanced browsing experience.
    Internet Explorer 11 (IE11) is available worldwide in 95 languages for download today. We will begin automatically updating Windows 7 customers to IE11 in the weeks ahead, starting today with customers running the IE11 Developer and Release Previews. With this final release, IE11 brings the same leading standards support--with improved performance, security, privacy, and reliability that consumers enjoy on Windows 8.1—to Windows 7 customers.
    And with Windows 8.1, IE11 delivers the best experience of your sites and apps together. IE11 on Windows 8.1 delivers an experience that is fast, fluid and perfect for touch - the best Web experience on any tablet.
    http://blogs.msdn.com/b/ie/archive/2013/11/07/ie11-for-windows-7-globally-available-for-consumers-an...
    Download: http://windows.microsoft.com/en-us/internet-explorer/download-ie
    Note: Uncheck the small print if you don't want the following defaults:
     * I would also like Bing and MSN defaults 
    ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
    If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
    Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
    Microsoft MVP - Consumer Security
    SpywareHammer

    Internet Explorer 11 comes with support for the latest web standards, advanced developer tools and improved security, in order to offer users an enhanced browsing experience.
    Internet Explorer 11 (IE11) is available worldwide in 95 languages for download today. We will begin automatically updating Windows 7 customers to IE11 in the weeks ahead, starting today with customers running the IE11 Developer and Release Previews. With this final release, IE11 brings the same leading standards support--with improved performance, security, privacy, and reliability that consumers enjoy on Windows 8.1—to Windows 7 customers.
    And with Windows 8.1, IE11 delivers the best experience of your sites and apps together. IE11 on Windows 8.1 delivers an experience that is fast, fluid and perfect for touch - the best Web experience on any tablet.
    http://blogs.msdn.com/b/ie/archive/2013/11/07/ie11-for-windows-7-globally-available-for-consumers-an...
    Download: http://windows.microsoft.com/en-us/internet-explorer/download-ie
    Note: Uncheck the small print if you don't want the following defaults:
     * I would also like Bing and MSN defaults 
    ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
    If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
    Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
    Microsoft MVP - Consumer Security
    SpywareHammer

  • Hp solutions centre software download for windows 7(64 bit) for photosmart 3110 printer?

    How & where to get the hp solutions centre software download for windows 7(64 bit) for photosmart 3110 printer? The full hp solutions centre software features such as photo editing, etc that can be utilized for windows 7(64 bit) with photosmart 3110 printer

    Hi Nogot7, you will have to share 3100 over your network.
    On the XP computer .....
    Open Printers and Faxes.
    Right-click the printer you want to share, and then click Sharing.
    On the Sharing tab, click Share this printer and then type a share name for the shared printer.
    On the Win 7 computer ....
    Go to Devices and Printers
    Add a printer
    Add a local printer
    Select Create a new port:
    Select Local Port for the Type of port:
    Enter the network name of the XP computer ie. \\XPcomputername\share name
    Install the 3100 driver when prompted (DO NOT use the CD but the Win 7 built in driver)
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • HT2477 Are documentS created with Microsoft office for windows and Microsoft office for mac are compatible with each other

    Are documents created with Microsoft office for windows and Microsoft office for mac are compatible with each other?

    As with a lot of software, it depends on the version of Word, and what features the author used.
    Technically, Office 2010 for Windows and 2011 for Mac are supposed to be feature compatible. As are Office 2007 for Windows, and 2008 for Mac.
    However, if a person using Office 2010 / 2011 used a feature that only exists in that version and sends the file to someone using Office 2007 / 2008, they would very likely have trouble opening the file, or having it display as intended.

  • DRIVERS REQUIRED FOR WINDOWS 7 (32-BIT) - FOR HP Pavilion g6-2004tu Notebook

    Hi everybody!
    Today have formatted my Notebook and changed the OPERATING SYSTEM to Windows 7 (32-Bit) (Enterprise Edition)
    Need basic drivers for the my HP Pavilion g6-2004tu Notebook for the following devices, currently being Yellow Highlighted by the Device Manager:
    1. Ethernet Controller
    2. Network Controller
    3. PCI Device
    4. PCI Simple Communications Controller
    5. SM Bus Controller
    6. Some Unknown Device
    7. USB Mass Storage Device (Although it is reading the Flash Drive)
    Your help is requested and reply is anxiously awaited.
    Thanks in advance.
    Best Regards,
    Faraz
    This question was solved.
    View Solution.

    Hello mike_farhat.  I understand you're looking for drivers for your G6.
    Unfortunately there are no drivers available specifically for Windows 7 32-bit.  However, here is a link to the drivers for Windows 7 64-bit.
    Another thing you could try is to install both the HP Software Framework and HP Support Assistant.  Then you can run HP Support Assistant and the application will scan your PC and automatically download and install any drivers which are available.
    I hope this helps.  Have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • HPSolution software available for download for windows 8 and d110A all in one?

    I got a new computer runnning windows 8.1. I tried to use the installation disk that came with the printer, but it is not made for windows 8. I tried downloading software from the website, but it only had eprint and that did not work right. I removed it. I really want the hp solutions- I could do so much from my computer with it.  

    Hi KarH and welcome to the HP Forum,
    I understand that you are having an issue installing the software for Windows 8.1. I will try my best to help you resolve this. Here is the a download for the HP Photosmart Full Feature Software and Drivers. I suggest that you download and save it to your computer and then run it. Since you've had a previous version on I recommend using the HP Officejet Pro Software and Driver Removal Utility to make sure that everything was removed before installing again.
    I hope this helps, let me know how it goes.
    Thank you,
    I worked on behalf of HP.

  • Patch Needed for Windows 64 bit OS for bug number - 9356752 ...OID 11.1.1.6

    Hi,
    I m doing OID - OAM integration for SSO.
    OID 11.1.1.6 (64 bit)
    RCU 11.1.1.6 (64 bit)
    Oracle DB 11.2.0.3 (64 bit)
    Weblogic Server 10.3.6
    While installing OID 11.1.1.6
    I m getting error during configuration as
    [2013-01-19T13:40:42.723+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JlHnUopFk3WFLzvH8A1Gy^Jk00000A,0] Trying to start the component oid1
    [2013-01-19T13:40:42.855+05:30] [as] [WARNING] [] [oracle.as.config] [tid: 19] [ecid: 0000JlHnUopFk3WFLzvH8A1Gy^Jk00000A,0] Failed to start component oid1[[
    oracle.as.config.ProvisionException: HTTP status code = 400 : The request parameters did not match any components
         at oracle.as.config.impl.OracleASComponentBaseImpl.manageProcess(OracleASComponentBaseImpl.java:943)
         at oracle.as.config.impl.OracleASComponentBaseImpl.start(OracleASComponentBaseImpl.java:1062
    I searched through oracle support ..I got a patch for this issue (bug number 9356752) but its for Linux and Solaris.
    Can I get the patch for Windows 64 bit OS or any solution to resolve this issue?
    Thanks and Regards,
    Yogesh

    Hi,
    I have faced the same issue when I was installing OID in linux server, but was able to fix the issue with right version of RCU ( I was using RCU 11.1.1.5 with OID 11.1.1.6).
    Regards,
    Raghav

  • How do I download 32bit Drivers for Windows 7 on Bootcamp for OSX 10.8.1?

    Here is the deal,
    I am a computer technician for a library and I am installing Windows 7 on four brand new Apple MiniMacs with OSX 10.8.1 on them (don't ask). The Mac came with no install Disks and the Bootcamp Assistant only downloads 64bit drivers for windows. I am installing Windows 7 32bit on them and I need the drivers. How can I get them? Can somebody assist me please?

    Jpac-Parks wrote:
    I have machine shop tools and irreplaceable software that only run 32 bit and I really have a serious need for 32 bit windows support. I feel Maverics should support these old 32 bit tools.
    Buy a Windows machine or an older Mac if you wish to use 32bit Windows. (what are you going to do when MS quit supporting 32bit systems?)

  • Username and password for Windows doesn't work for Safari

    I just installed Safari 3.0.3 for windows under WindowsXP on local machine. But I have problem access local IIS.
    Here is what I did:
    1. type http://localhost in Safari
    2. I get a pop up login window says "To view this page, you need to log in to area localhost on localhost:80",
    3. I entered my username and password to Windows, then "Enter"
    4. The pop up window comes back, it says "the name and password entered for are localhost on localhost:80 is incorrect."
    I don't see this problem in IE or Firefox on the same machine. In Firefox, it pops a similar window ask for username and password, I entered the same username and password to Windows, it works. But in Safari, it doesn't.
    I am wondering if anyone knows how to solve this problem. thanks.

    Hi,
    i've couple of ideas that might help...
    1:
    just wandering are either of you guys accessing the internet via a proxy server? if so i suspect that Safari is not by bypassing local addresses and hitting the proxy server first.
    if this is the case, Safari should respect the same settings that IE does, so try setting IE and/or FF to bypass the proxy for local address/servers - and see if Safari now works...
    2:
    also, the text box that ask's you for your password, does it say on it somewhere, something like, "password will be sent clear" or "password will be sent encrypted"
    i seem to get a similar problem, but with accessing our work ISA server, my localhost is fine btw. Anyway it might be the case the safari is trying to send a clear text password to an encrpyted password request or vica-verca (sp?) - soooo try setting your IIS to accept clear/basic authentation as well at NT Auth/Encrypted
    ok, hope that helps, and make sense

  • Is there a "SCCM Package For Windows 7 (64-bit)" for an X220?

    Hey all,
    i found the "SCCM package for Windows 7 (32-bit) and (64-bit)" for ThinkPad X230s here...
     http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS034785
    ...but is there one for the X220s as well? I only see ones for M82, M92p M92, and X230
    any help would much appreciated. 

    That sounds great - actually based on our early research that is exactly the route we've decided to go.
    I don't see a document linked in your post, would you mind re-linking?
    Specifically, we'll want to include drivers for lots of x210, x220 and x230 varieties - and there are a lot of them that I don't have available for testing - they are many miles away.
    Appreciate the help!
    EDIT - I found the document linked in another thread and we've used it to pull in all the drivers we require for the 4 models in our environment.  thanks!
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mob​iles_pdf/dml_ur_ti_mdt_2.0.pdf

  • CS6 design&web license for windows changing into CS6 for mac?

    I' ve got the problem that I changed from windows to mac. Before 3 years I bought CS6 design&web for windows!
    Now I changed to mac and want to use my license. Is their any possibility?
    Please help me

    http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l
    Mylenium

  • No drivers for windows 7 64 bit for PI21AG

    I just paid $170 for a Cisco Aironet  802.11a/b/g Wireless PCI Adapter ( AIR-PI21AG-A-K9 ).
    I was suprised to discover that it doesnt have drivers for windows 7 64bit. for the price of one of these it should be able to be supported on windows 7.
    ive tried to run it on compatibility mode for vista and still nothing. this is very fustrating for an expensive product.

    Hello,
    I have the same issue; the Vista drivers don't work for me, the computer hangs; what's worse is that they even hang a computer with Vista.
    What can I do? This is very frustrating
    thanks

Maybe you are looking for

  • Reg. Exit/BADI for changing item data of PO in ME22N

    Hi all, My requirement is to update the field LABNR (Order Ack.) of few specific line items of a PO, in the Transaction ME22N, using Exit/BADI. I have tried the BADI  ME_PROCESS_PO_CUST. But the PROCESS_ITEM method of this BADI processes only the lin

  • Pie Chart in JSP

    Hi I want to create a Pie Chart in JSP. The data will come from Oracle Database. I am not very good with managing big open source projects like Cewolf to draw charts. Is it possible to do this in the simplest way possible as I am not experienced in t

  • Iweb says font in not installed.

    I have a serious problem with iWeb. One of the sites I have made (and which runs for a few years now) uses the Skia font which is installed on my OSX 10.6.8 system. I use it often in all kinds of documents. Today I want to update a few pages in that

  • Created effect on clip in timeline. Want to save it for use later..

         I realize I can't drag a clip from the Timeline into the Event Library. So frustrating. So how do I go about setting that clip aside with the effects I have applied so I can use it later in various places in my timeline. I don't want it in the t

  • Can the lifetime of default route (in RA) to the client be renewed?

    The question is that why the "lifetime" for the "ipv6 nd ra" is set maximum 1800sec? It equals to just 30mins. If this timer is expired, how to renew the RA to the client? If the renewal is not possible, the client will loss the default route informa