Kinect V2 for windows sold out almost everywhere - is the product being continued?

Hi,
I would really like to get a Kinect V2 sensor for windows, but in the MS store of my country (the Netherlands) it is sold out. It is also sold out in pretty much every other european country. I only found some in the Canadian and Australian store.
Contact with the canadian store thaught me they do not ship to other countries and I should get it though the MS store of my own country. The MS store of my own country told me it's sold out, and told me it will not be 'in store' any time soon.
So my question is: why is this? will the product be produced and sold again or is it not being further developed / replaced by something new? ... if it's not discontinued, where/how should I get it?
Thanks!

Hi Carmine, thx for your reply. I see I can indeed order the Xbox One sensor and the adapter, both are still available, that's great!
My only remaining question then is: as a developer, will I have the same possibilities with this combination as with the sensor for windows? (sinse with the sensor for windows it is named a 'developer kit')
EDIT:
sorry, already found the answer in the blog post about the adapter:
"With the adapter, all Kinect v2 sensors—Kinect for Windows v2 and Kinect for Xbox One—perform identically."
So I'm ordering one :)
thx!

Similar Messages

To install Photoshop CS6, I have already downloaded the 2 files for Windows. How can I activate the product?

To install Photoshop CS6, I have already downloaded the 2 files for Windows. How can I activate the product?

I am having the same problem. I did download the two files and started the .exe file. The .exe file appears to run downloading files. When the bar is full the window dissapears without any options. Both files are in the same folder. any thoughts?

Kinect v2 for windows not working

I recently perchased the Kinect v2 for windows once I plug it and try to make it work with any software such as 3d builder it doesn't recognize the Kinect and the computer start making the sound as if the usb is being plugged and unplugged several
times
I ran the verifying tool and it says that the Kinect is not connected. the splitter is on and the Kinect is plugged in. the Kinect when plugged doesn't show any sign of life no light on the fan in not turning...
Please can anyone help
I tried to reach Microsoft several time with no help at all
Thank you,

See troubleshooting information as the system is not able to connect the sensor without some failure in the USB3/Device negotiation of bandwidth/resource. That is typically chipset issue which you can use the Kinect Configuration Verifier tool
to determine or you can dig into your device manager for further details.
If you cannot resolve the issue with the steps in this thread, you will need to use a different system:
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk
Carmine Sirignano - MSFT

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll.

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll. and one just said *Itunes was not installed correctly. Please re install I Tunes Error 7 (windows error 127) . I've tried uninstalling and reinstalling it. But either way cant work. I really need some of your help! PLS HELP ME!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The error shares a similar pattern to that in the third box, so a similar approach should work. Look for CoreFoundation.dll in C:\Program Files (x86)\Common Files\Apple\Apple Application Support, delete it, then repair Apple Application Support.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

I bought PhotoShop 12.0 for Windows 8. I cannot find the Curves function in the program. Is Curves excluded from this version? If so, how can I upgrade to get Curves? Thank you!

I bought PhotoShop 12.0 for Windows 8. I cannot find the Curves function in the program. Is Curves excluded from this version? If so, how can I upgrade to get Curves? Thank you!

teddy27 a écrit:
Thank you, Michel, for your helpful answer. I have downloaded SmartCurve and saved the files in C:\program files\adobe\Photoshop elements\plug-ins. I re-started PhotoShop. Do I access SmartCurve to adjust curves from within PhotoShop?
You can acces it from the menu 'Filters', there is a line called 'Easy.Filter', click it and it shows 'Smartcurve'.
Separately, can I upgrade my PhotoShop Elements to Photoshop without signing up to the CC 'rental' system of monthly payments? Sincere thanks, Ted
I know that you don't need the CC 'rental' subscription to have Photoshop, but as far as I know, there is no upgrade path from Elements except periodical special offers.

How can I find itunes 10.1 for windows. I don't want the cloud in newer version.

How can I find iTunes 10.1 for windows. I don't want the cloud, and my iPod touch won't go back to prior versions.

Had the same problem. Also worked fine on my MacBook, but not on my new iMac. Here's what I did to fix it:
Archive and Reinstall Mac OS (takes about 40 minutes). This reverted my system back to 10.6.2. Just pop in your Mac OS disc that came with your computer. Mine had 10.6.2 on it, and "Archive and Install" is the default option. When it's done, run software update and update everything. Now it all works fine.
Somewhere along the way, some file got corrupted somehow. But doing an "archive and install" of your OS undoes whatever file damage was incurred, and allows everything to update normally via Software Update as it should.

I was advised to purchase dazzle video creator to move analog videos from an old sony camcorder to a mac. I have purchased the dazzle and the specs seem to be for windows only. Has anyone used this product on mac?

I was advised to purchase dazzle video creator to move analog videos from an old sony camcorder to a mac. I have purchased the dazzle and the specs seem to be for windows only. Has anyone used this product on mac?

I am not certain, but I believe there is a version of Dazzle for the Mac. However, it is not the route I would chose.
You really need a proper analogue to digital converter, like the ADVC110, to connect to your camera via the usual RCA cables, and to your Mac via firewire.

TS1702 I cannot get an unlocked version of drivesafe.ly to operate on any accounts on my iphone 4S and have had no help when I asked them for support. I am now trying to figure out how to refund the product. Anyone know how to make that request through

I cannot get an unlocked version of drivesafe.ly to operate on any accounts on my iphone 4S and have had no help when I asked them for support. I am now trying to figure out how to refund the product. Anyone know how to make that request through itunes?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

The MS15-10 Security Update for Windows Server 2012/R2 Essentials and the Client Restore Functionality

The MS15-10 Security Update for Windows Server 2012/R2 Essentials and the Client Restore Functionality - The Windows Server Essentials and Small Business Server Blog - Site Home - TechNet Blogs:
http://blogs.technet.com/b/sbs/archive/2015/03/13/the-ms15-10-security-update-for-windows-server-2012-r2-essentials-and-the-client-restore-functionality.aspx
FYI

Hi Susan. I hope there's a better 'fix' coming to replace this "uninstall the updates, restore, then reinstall the updates after the restore". This kind of workaround requires that all of us remember that there's a problem
with KB3023562 and KB3004375 from now until the end of WS2012E. Not sure I'll remember this 6 months from now when the problem crops up during a restore. -:(
Merv Porter
=========================

I just downloaded adobe elements for my mac, accidentally chose for windows though, how do I change the download for my mac

I just downloaded adobe elements for my mac, accidentally chose for windows though, how do I change the download for my mac

Download Photoshop Elements products | 13, 12, 11, 10
Mylenium

How to find out who has deleted the production Query

Hi All,
I have searche SD , i can find it for infoobject deletion but i couldn't find it for Query.
Please let me know is there any possiblity to kow
How to find out who has deleted the production Query
Awaiting for your replies.
cheers

Hi Mahesh and all,
Thanks for all your inputs.
I have tried with RSRREPDIR tabel , I am unable to see that query at all.
If I use theT-code SLG1,
please guide me on the steps with paramets to be given in the respective ..object, subobject etc..
OR
could you please suggest any other way.
cheers
leena

I have dowloaded Photoshop + Lightroom (subscription) but no serial number have been provided for Photoshop CC so I cannot access the product. Please help

I have dowloaded Photoshop + Lightroom (subscription) but no serial number have been provided for Photoshop CC so I cannot access the product. Please help

Thank you Steve. Will do it straight away.
We can can continue talking this evening, no prob.
Rgds
Marco
Il giorno 16/mag/2014, alle ore 19:12, SG... <[email protected]> ha scritto:
I have dowloaded Photoshop + Lightroom (subscription) but no serial number have been provided for Photoshop CC so I cannot access the product. Please help
created by SG... in Photoshop General Discussion - View the full discussion
Hi,
When did you make the purchase? Can you try signing out of the CC desktop app, and then signing back in?
I'll see if I can get direct support sent your way as well. How much longer are you available for this evening? We can communicate directly as well if you prefer.
regards,
steve
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6385161#6385161
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I can't reactivate windows as i can't read the product key on the bottom of my dv6-1350us

i can't reactivate windows as i can't read the product key on the bottom of my povilion dv6-1350us

You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).

How can I add the lyrics for songs in MP3 format in iTunes for Windows? There is even no the 'Lyrics' tab in the 'Get Info'.

This topic may be old for you, but I searched everywhere on internet and there's still no solution. I even called the Apple Support and the contact support is taking so long to answer... I can't add the lyrics for songs in MP3 format in my iTunes 11.1.3 for my Windows 8.1, I clicked right at the song in my iTunes library, clicked 'Get Info', and there's no 'Lyrics' tab there. I tried several lyrics-adder programs but they just won't work. How can I add lyrics for my MP3 songs then?

You may find that the file is Read-only, which means that it cannot be altered.
However, you can change the Read-only in "Properties" using your file manager.
1. The location (for the next step) of a song is found by looking n the Get Info/Summary>Where: of each song. Make a note of the location.
2. Go to the location (on your computer) of the song, right-click it and the last item on the pop-up menu is Properties. Go into Properties/General>Atributes and turn off the tick in the box named Read-only. Now go back to your iTunes Library and try that song again. The Lyrics tab should now be there.

Kinect V2 for windows sold out almost everywhere - is the product being continued?

Similar Messages

Maybe you are looking for