Kinect V2 Sensor - Device Cannot Start

Greetings all!
I have a standard HP desktop running a fully updated Windows 8.1, plently of RAM, with a Renesas USB 3.0 adapter.
I have powered up the Kinect V2 and plugged it into the USB 3.0 adapter (there are no other devices on this USB hub).
While programs like Kinect V2 Studio start up just fine and "connect" and "monitor" don't give errors (you can see the clock ticking away), I'm not seeing anything in the monitor window.
So, looking at Device Manger, I see "Device Cannot Start" for the "WDF Kinect Sensor Interface 0" and, of course, the icon in Device Manager has the deadly yellow exclamation mark. (Also: "Current Device Power State cannot
support his request").
The Renesas USB 3.0 adapter board has a SATA power plug so there's plenty of power to the USB port.
Can't see what's wrong. Wish that Microsoft had a 'verification' app that would help troubleshoot the box.
Any ideas??
Cheers, Robert Moore

Similar Messages

Kinect for Windows V2 Device cannot start

I was able to use my Kinect for Windows V2 sensor yesterday with all of the applications in the SDK browser but the next day after restarting my computer I was no longer able to use the device. Looking at the device manager I get this message under the properties
for WDF KinectSensor Interface 0 (the only device listed under Kinect sensor devices):
This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
I'm plugged into a USB 3.0 input. Any ideas?

I encounter the exact same issue:
WDF KinectSensor Interface 0
This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
I'm using an Intel 4ghz i7 processor plugged into an ASUS Sabertooth Mk1 Z97 Motherboard. The ASMedia on the board had some issues, so i'm using a USB 3.0 PCI/E card by Manhatten. Diagnostics indicates that everything but depth checks out. Depth fails because
the camera reports all black.
This is particularly frustrating since I built this computer to offer USB 3.0 support specifically so I could do work with Kinect and Unity. This was before I knew the issues Kinect has with ASMedia, so for me this has been a significant investment for a
black screen.
Edit: To clarify, the Kinect is plugged into the PCI/E card (Manhatten 150491) and not into the board or a case slot.
Additonal note: The Kinect does not function properly plugged into my old PC (a USB 2.0 with an i7) or into my Surface Pro (1st gen)
- Matt Eland

Ideapad U350 Light Sensor (This device cannot start. Code 10) in Windows 7

After I installed Windows 7 (32bit), everything works fine. However I am getting a yellow mark in Device Manager for the Light Sensor (Ambient Light Sensor). If you look closely, it says "This device cannot start. Code 10".
I have search the Lenovo site but I cannot find the driver, drivers for other hardware devices are available here
http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=61415
Is a Windows 7 driver for ALS available from Lenovo? If not, does anyone know who is the manufacturer for the ALS component?
Also where can I download the following software for Windows 7 that is pre-installed into Vista?
Lenovo OneKey Recovery
ReadyComm
Veriface

help i have the same problem, but i am in Vista 32bits, i cannot even see the light sensor in the device manager!!
where can i download the drivers for vista?

"Device Cannot Start - Code 10" - Windows Vista Error, w/ 2nd Gen. Nano

I'm having trouble with my Nano and Windows Vista. The computer is recognizing the iPod just fine and seeing all of my songs, but nothing will play and the diamond bar does not move. I can't hear previews online either.
Under device manager, a yellow "!" shows up for the iPod, and it says "Device Cannot Start - Code 10" when I check. All of my drivers and updates are current as of today. So is iTunes. Any thoughts?
It worked before, but now it's not.

This is a reasonably common error on a PC when there is a problem with either a USB device, your USB cables or hardware, or the system drivers.
In a case where, as you say, the device works properly with other computers, the problem is more likely to be with the hardware or drivers on the computer you're trying to connect to.
See this site for some hints:
http://www.pchell.com/hardware/usbcode10.shtml
I found it via a web search; I don't have any connection to that site.
The good news is that your iPhone is probably fine.

"This device cannot start. (Code 10)" 6th gen nano ?

Hello!
I recently purchased a used ipod nano 6th gen. It was working great by itself but it won't connect to my laptop. Here's the short story:
Ipod worked fine out of the box. Is not recognized by Windows7. Installed and reinstalled the driver, no effect. iPod does not charge from the laptop of from the power outlet. I have itunes version 11.2.2.3 but the ipod has not been able to connect or be recognized by itunes yet.
Here's the Long story w/ the details:
1. Before I connected it to anything with the cable, I was able to use all of the features and played the radio it worked fine.
2. It began to give the low battery warning.
3. I plugged it into my laptop with the usb cable for the first time.
4. Windows (7) gave the error window pop-up: "USB Device not Recognized."
5. If I click on that error pop-up window the next window says "Windows has stopped this device because it has reported problems. (Code 43)"
6. If I open Device Manager, it shows one of the USB ports name is "Unknown Device". If I leave the nano plugged into the USB, the device manger window appears to update every 10s or so and alternates between displaying the port name "Unknown Device"and not displaying the port named "Unknown Device".
7. If I click on device properties of the "Unknown Device" USB port from the Device manager screen, I see that the error also alternates between "Windows has stopped this device because it has reported problems. (Code 43)" and "Currently, this hardware device is not connected to the computer. (Code 45)"
8. When attached to the USB port the nano screen alternates between 3 displays, 1 - "low battery", 2 - the apple logo, 3 - the home menu, which is operational. The battery meter symbol shows 0 power and does not indicate charging.
9. If I unplug the nano it does not turn on with the sleep/wake button, I think due to depleting the battery.
10. If I plug the nano into the wall charger, the screen alternates between the home menu which is operational and the apple logo. The battery symbol shows 0 power and does not indicate charging.
11. I followed some troubleshooting steps, on the "Device Properties" window I see the following information:
Driver Provider: Microsoft; Driver Date: 6/21/2006; Driver Version: 6.1.7601.18328;
12. If I select "Driver Details" button, a window appears that says"No Driver files are required or have been loaded for this device"
13. I found trouble shooting steps on the apple website to install the driver, which I followed. I navigated to the folder with the driver as recommended from the apple website and selected it. C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers "usbaapl", then selected "Apple iPod USB Driver" from the list to install.
14. I get the error window titled "Update Driver Warning" which explains installing the driver is not recommended as Windows cannot verify it is compatible with my hardware, but I proceed with "yes".
15. Next window titled "Update Driver Software - Apple Modbile Device USB Driver" shows the error "Windows encountered a problem installing the driver software for your device; Windows found driver software for your device but encountered an error while attempting to install it; Apple iPod USB Driver; This device cannot start. (Code 10)" and it suggests to download a new driver.
16. Next, I uninstalled the driver and followed all of those steps and it indicated success, also chose delete driver software option.
17. If I plug in the nano at this point I get the indication windows is trying to install driver software, and then the same error occurs as when I first plugged it in "USB Device not Recognized." and I can go through all of the steps again.
18. The Driver details button gives the following info:
Provider: Apple, Inc.; File Version: 1,64,0,0; file names usbaapl.sys & usbaaplrc.dll; driver version 6.0.9999.65.
19. Now the device manager window alternates between showing and not showing the USB port named "Apple Mobile Device USB Driver".
20. If I look under Devices and Printers, it shows a generic icon with the title "Apple Mobile Device USB Driver" with a yellow exclamation mark and the status shows "Needs troubleshooting"!
Can anyone help me I will give you any detail and info you want!
thanks!
steve

Hi: You need to download and install this graphics driver... This package provides the AMD video drivers and control panel for the supported notebook models that are running a supported operating system. File name: sp57199.exe

IPad2 on Windows 7 : MTP USB Device = This device cannot start. (Code 10)

Hi Guys,
I want to access to the Internal Storage of my iPad 2 on Windows 7.
But I have an error with the MTP USB Device => This device cannot start. (Code 10)
So I cannot see my iPad in Windows Explorer.
I tried many actions from Forums :
update the driver to the "Apple Mobile Device USB Driver" located in "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"
delete the upper and lower filters in REGEDIT : {36FC9E60-C465-11CF-8056-444553540000}.
stop and restart the service "Apple Mobile Device"
But as soon as I connect again the iPad there is the same error message after Installing device driver software => "Device driver software was not successfully installed" : MTP USB Device : Fail
Is there someone who get the solution ?
Thank you for you help
Stephane

I have a similar problem, only mine is Code 31 for the MTP USB Driver. The Apple driver loads fine, and I'm able to sync with iTunes, but I can't connect to the device as a drive and copy the photos off of it.
I've tried nearly everything at this point that has been suggested in other threads, and nothing has seemed to work.

P55-GD85: USB3.0 not working (device cannot start)

I'm running Windows 7 x86 and I've installed all the new drivers from the MSI homepage. Unfortunately, the USB 3.0 Host Controller is not working.
There is a device "Renesas Electronics USB 3.0 Host Controller" but I do have the error message "This device cannot start. (Code 10)".
I also tried to install the driver delivered with the motherboard with the same result.
Any suggestions? Could it be a hardware problem?

What if you manually uninstall the device from Windows Device Manager then let Device Manager rescan and reinstall?
Try to check the disk file system for errors. MY COMPUTER > RIGHT CLICK on C Drive and select PROPERTIES. TOOLS then select CHECK NOW. Tick the top box.
Also try to cleanup with CCleaner and run Malwarebytes. I've fixed quite a few systems with CODE 10 issues using the above.
You can try the USB controller firmware update and latest driver available here:
http://www.station-drivers.com/page/msi/msi%20p55-gd85.htm

Portege A600-175 - Card reader device cannot start

I got a Portege A600-175 running windows XP SP3 with a problem in the card reader device. Inserting a SD it makes the sound that usually USB devices make when inserted ( and also when it is removed) bur it doesnt appear on my computer. Getting to device manager It appears as a disk with an exclamation point over it and in properties I see the error This device cannot start. (Code 10)
Ive already removed the device and let windows look for it and install it again but the problem continues.
Thanks in advance for looking into it.

Thanks Xardas for the fast reply,
As I'm in Potugal some terms appearing blow are in Portuguese. So I've download the driver (carc-20081103175358 - Card Reader Ricoh) uninstall "Ricoh- Controladores anfitres digitais seguros", run the setup in the downloaded driver folder.
Restart the machine (prompt by the setup) as the restart takes place I got the balloon "new pci device found". After the complete install the problem continues
By the way in the properties tab of "Ricoh- Controladores anfitres digitais seguros" I still got under detailes Publisher(fornecedor) Microsoft corporation Version 6.0.4069.5512 xpsp0850413-2111
Thanks again

Pavilion dv9700 DVD/CD ROM stopped working: Code 10 (This device cannot start.)

I have a HP Pavilion dv9700 running Windows 7 where the DV)D/CD ROM drive fails to be detected. I can still get it to open and close. The device manager gives an error: Code 10 (This device cannot start). I read somewhere that iTunes upgrades can cause DVD problems in HPs, and I did upgrade iTunes a couple of days ago. I did upgrade the BIOS a few moments ago, but it didn't help. Thank you in advance for any help you can provide.

Thank you for the responses! Sorry it took me so long to implement--I wanted to back everything up first before messing with the registry. Following the instructions to delete lines in the registry AND uninstalling iTunes allowed for the DVD/CD ROM to pop up with an exclamation mark in my Device Manager. Updating the driver did not help as the computer said the driver was up-to-date. Mysteriously, when I rebooted, the DVD/CD ROM disappeared from the device manager again. I forgot to mention in the initial post that the DVD/CD ROM light blinks steadily at about two blinks/second. Any other ideas? I am wondering if this is a hardware failure now.

X61 - SD Card Reader - (Code 10 - the device cannot start)

Hi.
One of our users in RTX Telecom Denmark have a problem with his X61.
Everytime he insert a SD card to the reader it comes with this error message:
Code 10 - the device cannot start.
We have tried all the Windows hotfixes, reinstalling the drivers from:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67971
restarting the machine, but nothing helps.
Do you know anything about this issue.
Thanks in advance.
Best regards,
RTX Telecom A/S
Jesper Breum Larsen
Trainee
Stroemmen 6
DK-9400 Noerresundby
Web: www.rtx.dk
Message Edited by RTX-IT on 02-13-2009 09:20 AM

I have now tried with the preload without any luck. Or that is not completly true, I could put a 1 gB Kingston card in the computer and it would pop up. But it also freezed the computer from time to time.
If I took the card again after a freeze, the computer went back to normal.
But out of 6 SD cards, that was the only one I managed to get working.
I tried all kind of sizes:
64 mb (no luck)
512 mb (no luck)
1 gb (kinda worked - sometimes freeze)
2 gb (no luck)
4 gb (no luck)
8 gb (no luck)
So now I have called Lenovo support and they will come and fix it for me.

Satellite Pro A10: New Atheros/Askey WLan card but 'This device cannot start' code 10

Hi there,
I have a Satellite Pro A10 and have purchased an internal mini pci wireless adapter. The following information is displayed on my card:
Askey WLL3070-D4(MOW)
Atheros AR5BRB-43
I installed the card, hooked up the ariel's and turned the laptop on...the switch at the front now lights up and windows xp finds the new ethernet adaptor. My problem is this...
No matter what driver i install (and ive tried every Askey/Atheros etc driver from the first 20+ pages of yahoo/google) the card installs fine but then in device manager has a yellow ! next to it and says This device cannot start (code 10)
I'm really stumped. I have some more ram coming in a few days at which point i shall be installng Vista which im hoping sorts my problems out but does anyone have any ideas?
I've yet to find a driver which specifically refers to the AR5BRB or the model number WLL3070-D4.
Does anyone have a location for a driver etc?
thank you

Hi
I use always this page for WLan driver update:
http://aps.toshiba-tro.de/wlan/
This is a Toshiba WLan driver portal and there you can find all necessary WLan drivers
Ciao

Drvice Manager /!\ next to NVIDIA nforce 10/100 Mbps Ethernet.Device cannot start Code 10

Product Name and Number:
HP Pavilion Dv9700
s/n [Personal Information Removed]
p/n FE395UA#ABA
Operating System:
Windows Vista 64bit
Current Issue:
When I open my Device Manager there is an /!\ next to NVIDIA nforce 10/100 Mbps Ethernet.
When I open it's properties there is a message under the Device Status stating:
"This device cannot start. (Code 10)"
It gives me the option to "Search for solutions" which has proven unsuccessful.
Also, I have the latest driver installed.
This question was solved.
View Solution.

Hi,
Right click the device itself and select Uninstall. When this has completed, restart the notebook and let Windows re-discover the device and then check in Device Manager again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Intel Management Engine Interface, Device status: This device cannot start (Code 10).

hi Tec,
Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10). Using original driver version: 6.0.0.1179 A released date 09-12-2009 (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79194-1&cc=us&dlc=en&lc=en&...=), running OS windows 7 Enterprise, 64 bit. HP Pavilion dv3-2390eg Entertainment Notebook PC.
Issue: my computer auto restart after 2 hours please resolved the issue
Logs captured from System summary:
[Problem Devices]
Device PNP Device ID   Error Code
Intel(R) Management Engine Interface
PCI\VEN_8086&DEV_3B64&SUBSYS_1404103C&REV_06\3&11583659&0&B0       this device cannot start.
Cisco Systems VPN Adapter for 64-bit Windows                ROOT\NET\0000               This device is disabled.

Hi Jeenny,
Welcome to Lenovo Community!
As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

R61: Intel 82566MC Gigabit Network Device Cannot Start (Code 10)

Hi
I purchased a Western Digital 7200 rpm 320 GB hard drive (the WD3200BJKT) a few days ago to be installed in my ThinkPad R61 (model 773215A). After making a fresh install of Windows XP SP3 and all the drivers, everything seemed to work fine except for my ethernet device, which is an Intel 82566MC Gigabit Network Connection. I obtained the following error code: "This device cannot start. (Code 10)". The ethernet device only functioned once, which was right after I installed its driver after the fresh install of Windows XP. However as soon as I rebooted, I received the above mentioned error code. By the way, the device was working fine before I changed my hard drive.
I have tried everything described in troubleshooting guides available online, including disabling and enabling the ethernet device, uninstalling and reinstalling the ethernet device and updating the drivers, but to no avail. The only way I could make it function again is by switching off my notebook, unplugging and replugging the power adapter and finally switching the notebook on again. If I were to do a restart, or switch my notebook off and on without unplugging the power adapter, the ethernet device would not function.
I have a feeling that it might be the bios. I am currently using the latest bios (version 2.26), and I noticed that this bios was 'supposed' to fix "The "New Hardware Found" message for Intel Gigabit Ethernet may appear." Looks like some problems with the Intel Gigabit Ethernet still exist. However I have tried flashing several older versions of the bios, but the problem still persists. Appreciate any help/suggestions I could get. Thanks.
type added.
Message Edited by Agotthelf on 04-04-2009 06:27 PM

Hello
I bought my R61 beginning of 2008, and since then I had this problem - only with the LAN device, NOT with WLAN - 3 times. It did never have something to do with reinstalling Windows or installing a new device like a HD, it just happend, usually after configuering new network properties (with the tool Access Connections).
The first time when I experienced this, I tried to reinstall the NIC driver, but that didn't help.
Every time, after 2 or 3 days, the problem simply disapeard.
I have on the same laptop, on a second HD partition, a Debian Linux installed. This time, my NIC started its "time-out" after configuering new network properties on Linux, and it does not work anymore on neither Linux nor Windows (2 days so far).
It's really annoying, and because it seems the OS has no influence, I think it is Lenovo's job to fix this problem.
I belive it's - like mhafiz says - a BIOS problem, or some hardware issue, so please: Lenovo, it's your turn!
I always bought Thinkpad Laptops until now, and I think they are in quality high above any other brand, and I really hope this will continue.
Chris
PS: I hope your (and also mine, like it did before) NICs will just resume operating after a while...

Bootcamp bluetooth driver issue ("This device cannot start. (Code 10)")

Hi everyone,
I have a problem (re)pairing my Apple mighty mouse with Windows 7 under Bootcamp.
Initially I had my mouse working through updating the driver to the one from Apple as is described on various forums.
After rebooting my laptop the mouse didn’t connect anymore. So I tried to repeat updating the driver to the apple one. But this time it didn’t work.
I then updated the Bootcamp drivers from the OSX installation disc.
Then, when I checked the hardware, it showed:
Apple Built-in Bluetooth
Microsoft Bluetooth Enumerator
Under these setting my computer still doesn’t detect my mouse under windows.
So I checked to see if I could update my drivers again. This time there were four instead of two:
Apple Broadcom Built-in Bluetooth version 3.1.0.1 [23-11-2009]
Apple Broadcom Built-in Bluetooth version 4.0.0.1 [27-4-2011]
Apple Built-in Bluetooth
Apple Built-in BluetoothDFU
First there were only the first two. Of these two, the first one worked for the first time I paired my mouse.
When I change the driver to any of the three other than the Apple Built-in Bluetooth, it says:
“Windows encountered a problem installing the driver software for your device” with this error:
“This device cannot start. (Code 10)"
After trying this, the initially set driver (Apple Built-in Bluetooth) gives the same error. Resulting in having to reinstall all the drivers all over again.
Anyone encountered the same problem or at least the error of “This device cannot start. (Code 10)"?
Thanks.

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

Kinect V2 Sensor - Device Cannot Start

Similar Messages

Maybe you are looking for