Kingston HyperX Memory for K7N2 Delta-ILSR

Hey will my K7N2 Delta-ILSR support the Kingston HyperX serises DDR400-512MB Ram?
Im looking to buy 2 maybe 3 of these and really want to be sure theyll work.
http://www.ec.kingston.com/shop/partsinfo.asp?ktcpartno=KHX3200A/256&promo=hx2shp
I checked the supported ram list for the K7N2 Delta-ILSR and they wernt on there so i just figured it may be out of date?
So thanx in Advance for info!
p.s. It will support 3x 512MB right?

Has anyone noticed how the Hyper X went from the poor-man's Corsair to being priced equal to OCZ, and usually higher then Geil, as well as usually being very close to Corsair, if not the same? I think only Mushkin beats it out now price-wise...

Similar Messages

AGP Setup For k7n2 delta ilsr

I have a k7n2 delta ilsr mb, in display properties on desk top setting tab then advanced button then GeForce tab under adapter information is Bus and memory. To the right of Bus it reads AGP (PCI mode) shouldn't that read AGP (8X), how can I change this. Ron.

Hi,
No, leave it at 64 or 128.
Go here for an explanation:
http://www.rojakpot.com/default.aspx?location=7&var1=18
Then - Click on: "Free Access To the BIOS Optimization Guide" near the bottom of the page - then click on "AGP Aperture Size"
Axel

Need help with jumper settings for k7n2 delta ilsr

I have a k7n2 delta ilsr and I'm using a AMD 2800+ barton 333 fsb. I'm not sure what the jumper settins are for this cpu. The users guide only shows 133/166 and 200, can anyone help me with the jumper settings.
Thanks, Ron.

Hi,
As your processor is 333FSB - the jumper should be set to 166FSB as should the BIOS. As your RAM CPU combination runs at 2x166=333 or thereabouts.
Basically, as a general rule, if you halve the FSB speed of your processor you'll get the setting for both BIOS and Jumper. 200FSB=100, 266FSB=133, 333FSB=166 etc. etc.
Axel

New Modded BIOS for K7N2 Delta ILSR

MSI K7N2 Delta ILSR Modded BIOS based on Official v. 7.80 BIOS
download here:

Description: Access through interface which is on insecure interfaces list detected. Request aborted.
Interface/Client IP address:
Date: Wed, 18 May 2005 13:11:17 GMT
Doesn't work for me
By the way did u put the bios to vork with 1.3 vcore like the braziliantech one that does't exist anymore ?
EDIT: Thanks it's working now

Case Recommendation for K7N2 Delta-ILSR

Greetings,
I'm looking for a mid size ATX case that that has the front usb etc. ports prewired as to work easily with a K7N2 Delta-ILSR mb. By that I mean I don't have to plug each wire individually (with names that don't match) just a plug that goes on the mb. My eyesight isn't as sharp so hooking up those one wire at a time is tediuous. Not to mention the lack of starndards Does anyone know if this is address on the next rev of mb's (with pcix etc).
Thanks

Brazos,
I have yet to see a case that has all the USB wires together, they are all 1 pin at a time. You will find the Antec line of cases very good. (You can always use a magnifying glass to see the pins.) The pin names on the Antec cases are standardized and easy to figure out.
If you want a good case at a cheap price, then go with the SLK3700AMB:
If you want a good high end case, then go with the Sonata:
If weight is an issue, then go with the Super Lanboy:
Take Care,
Richard

Warranty Length for K7N2 Delta-ILSR

What is the mfg's warranty length on the K7N2 Delta-ILSR?
I filled out the online support form earlier today but no response as of yet, and me being the impatient rascal I am, I didn't want to wonder all weekend. I bought it October, 2003 and the floppy drive controller seems to have gone out.
Thanks!
HH

Thank you, Glenn!
Looks like mine is 2 yrs. & 4 months old. Kind of stinks that I lost 5 months on the warranty by going by the mfg. date instead of date of purchase. Its not worth the hassle & would even cost more to RMA it for the controller. Ahh, but this is IT, the "World of Workarounds". I'll live!
Thanks for your time, Glenn!
HH

Temperature reading for K7N2 Delta ILSR

I have a 2500+ Barton (333 FSB) to work with K7N2 Delta ILSR and 2x256 MB Samsung DDRAM(400 FSB).I use MBM to read my CPU temperatures.Usually 45-47 C idle and 54-58 C under full load.I overclock CPU to 400 FSB and I get LOWER TEMPERATURES!!!!!
I use 1:1 bios setting for CPU and DRAM speeds either 333 or 400 FSB.
How can this by possible?

I use Speedfan which seems to follow the temp in the bios. I've heard that MBM is also accurate. As far as your temps going down on a OC that is very odd indeed.

Anyone help - need I/O plate for K7N2 Delta ILSR??

I'm based in the UK but will pay P&P worldwide........
cheers
D.

Good luck!
http://search.stores.ebay.com/ws/search/StoreItemSearch?catref=C5&fcl=3&from=R7&frpp=50&fsoo=1&fsop=1&sacat=-1&satitle=k7n2+delta+ilsr&sbrexp=WD1S&sif=1&sofindtype=0&sofp=4&ssPageName=WD1S
Edit: If applicable:
http://www.mycableshop.com/sku/ATXBACKPLATE.htm

Linux for K7N2 Delta-ILSR

Hello,
Does anyone know of with Linux distro is compatible with the K7N2 Delta Series?
Sincerely, Deft

Knoppix worked too, even my TvTuner worked.
Not that I would recommend Knoppix as a solution, I was just playing.
There is a lot more support for the nvidia kit now.

Replacement Chipset/Heatsink Fan (northbridge? for k7n2 delta-ilsr)

< i need a replacement heatsink and fan for this fan. that will fit! Reason: I want a new one that is quiter, and the original fan in it broke. I also need to be able to buy these part(s) online.

Me too. You can get them in copper or aluminium. I have the latter, and for more than year now it's been doing a fine job with minimum noise.
Check it out here:
http://www.pcabusers.com/reviews/iceberg/p1.html

Best agp card for k7n2 delta ilsr

Hi again folks
I'm thinking of upgrading my graphics card as although this card has never let me down its the oldest component in my box, I would like to get something in the sub £100 range, I dont do games but may wish to in future, mainly it would be for photo apps/running-backup-watching dvd's etc. any info would be greatly appreciated tia Hazzo

I notice your talking in £'s so I assume your located in the UK.
Have a look around overclockers.co.uk
For a sub £100 I noticed a good offer:
HIS ATI Radeon 9800 Pro - £82
Also, the 6600GT here is only £103.24 (£106 inc delivery), altough only 4 left in stock so buy now if you want one

HyperX with K7N2 Delta ILSR

I start a new thread because the topic could be interesting to other posters too.
From the MSI website we can see that Kingston DDR is recommended by MSI
but a lot of users here use other brands such as Corsair, Mushkin etc.
WHY?
and
WHY MSI does not recommend Corsair and Mushkin?
I believe both are reasonable questions.
And now lets move to the critical question.
Does the Kigston HyperX (PC3200) 400MHz (KHX3200)-CL2 will work smoothly with the
K7N2 Delta ILSR?
Any input is appreciated.
Thanks

msi_ole,
I have 4 computers here in my home office with various configs in them...way too numerous to list in a signature...my main system that I use for gaming is what is in my signature...I have the K7N2G-ILSR (non Delta) board in my testbed system...I have an MSI Ti-4600 Video card in another one of them...so I DO use MSI parts but I really like the combo of what I show in my signature much more than any other combination that I put together with all of this hardware...The system below is the fastest combo I found and it's that way even with no OCing so why wouldn't I go with it?
Also having this ASUS board let me know that not only MSI has issues with their nF2 chipset build because I've had to jump thru many hoops for various things with the ASUS board too...most of their problems are with the dual onboard network cards and memory issues which isn't really different than any of the other mfg's out there...I like to tinker with as much of this stuff as I can to see if it's one mfg or all of them and imho and from my tests it's NOT just MSI having this problem it's all of them...
What I said about Kingston has been their norm for years now...I used to own a computer store and they ALWAYS back out when they have issues...it's their way cause it's easier on them than having to actually fix something it seems...I don't like them and probly never will because of my experiences with them in the past...this is just my opinion and take it for what it's worth...
ALSO, if you had read my sticky post at the top of the forum you'd see that I recommend that you DO NOT follow MSI's recommended memory list as it could have been that they got a batch of modules that actually did work in the 1 or 2 boards that they tested them in...batches of memory differ highly in specs and those lists mean nothing to me when I buy memory anymore...gets me in the ballpark and nothing else...so take them with a grain of salt because NOTHING in electronics is absolute...parametric differences of electronic parts can leave you scratching your head for days when you just KNOW that something should work...it's the way it is...
My background in electronics is quite extensive starting with my DeVRY degree thru Guidance & Control Systems for Jets and Missiles to Memory Testers & VLSI testers used to test Intel/AMD CPU's and the memory we use in these beasts that we love to play with so much...
I've seen so much crap happen over the years I'm here hoping that I can help everyone and learn some stuff myself on the way...
Cheers!! 8)

MSI K7N2 Delta ILSR Memory problems

I'm trying to burn in a system in a 50 deg C (122 deg F) room for a minimum of 12 hours. The main system components are as follows:
Motherboard: MSI K7N2 Delta ILSR
CPU: AMD Athlon XP 2800+
Memory: 2x512 OCZ PC3200 EL
My problem is that the burn-in software continues to freeze up during the memory test. I've already contacted the software manufacturers and the software is stable. It's a problem with the way the motherboard handles the memory. I've tried putting the memory in dual channel configuration and changing the timing settings in the BIOS. The SPD settings are 2.5-3-3-7. Right now I have them at 3-4-3-8. It's a lot more stable than it was under the default settings but it still freezes up sometime after 7 hours. Unfortunately, I wasn't around when it froze so I don't know exactly how long it lasted. I can say that after 7 hours, it wasn't showing any slowdown in performance. If anyone could think of anything else I might be able to do to get the system stable, I would greatly appreciate it.

Thanks for the suggestions. The CPU FSB is 200, so it's already matched up there. And we have a ton of fans already. There are two in the front, 4 inside and 1 on the back. It's a custom case, 2u high. The power supply is oversized and more than adequate to provide the required power. I have four of these units running right now. Two with 2x512 sticks and two with 1x1024 sticks. For each combination, the memory clock speed for one is 166 and 200 for the other. I have been loosening up the memory timings trying to get the system stable, but it still isn't. If the power supply is good, and I'm unable to cool the system anymore due to limititions within the case, is there anything you can think of to stabilize the system. Maybe other settings in the BIOS or suggestions on how to go about getting good timings for the memory. Thanks.

K7n2 delta ilsr with kingston pc333

Owning a MSI K7N2 DELTA ILSR with an AMD ATHLON XP 2800+ and 512mb DDR KINGSTON (KVR333X64C25/512).
I like to run the motherboard with a FSB of 166MHz, with a 12.5 multiplier.
Setting the FSB/DRAM to 1:1 gives no troubles at all.
But FSB/DRAM 1:2 will lock up the booting process and the only way to escape the black-screen-of-nothing is to reset the bios with the jumper :-(
This way I run half the speed my memory is capable of!
Somebody a suggestion?

memory and cpu uses ddr to transmit data.
double data rate.
it means it sends data twice each clock cycle instead of one.
166mhz true transfer rate becomes 333mhz virtual transfer rate.

K7N2 Delta ILSR memory problem

I have a K7N2 Delta ILSR board with Athlon XP 2500 with 2 Gig of Mushkin Black Line ram (the ones that are
suppose to be CL2). I change the FSB to 200, and my memory won't run at CL2. Want to raise the Dram voltage
to 2.8V to see if it would make a difference. I looked all over this site for the modded bios 7.8. Does anyone
have the modded bios??? Any help would be appreciated.......

He/She overclocked the 2500+, to make it become a 3200+. Done it myself, but it mostly works with the first step of the 2500+. - That means the overclock forum.
Well, CAS 2 is a very tight timing, which I don't think is possible. In general on Socket A systems:
- FSB 133/266 --> CAS 2 or 2.5
- FSB 166/333 --> CAS 2.5
- FSB 200/400 --> CAS 3

Kingston HyperX Memory for K7N2 Delta-ILSR

Similar Messages

Maybe you are looking for