Kingston memory - KVR13LSE9/8 - has anyone used with W520 Quad core?

I have to order my memory for upgrade from a company catalog. The memory recommended on the Kingston website for the W520 quadcore is not available (TL-TP3B/8G - DDR3, 1333MHz, Non-ECC, CL9, X8, 1.5V, Unbuffered, SODIMM, 204-pin). However, KVR13LSE9/8 is available and appears to be the right specs (Kingston 8GB ValueRAM - 8GB (1 x 8GB) - DDR3L - 1333MHz (PC3-10666) - ECC - Unbuffered - 240-pin SoDIMM - 1.35V - CL9). Wondering if anyone has used this memory with their W520 quad core?
Thanks

Avoid Value RAM, they have a greater chance of not working. If you need cheaper RAM, I can recommend Crucial.
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

Similar Messages

Blu-Ray Creator does not seem to work- has anyone used with success

I just purchased Blu-Ray Creator from the app store and it will not let me backup a hardcopy Blu-Ray disk onto my hard drive. Has anyone bought it and got it to work?

Hi abhi.p,
Thank you very much for your kind reply.
Yes, it does show the checkbox as checked if I use value="#{true}". However, it is checked permanently, user cannot uncheck it.
That's why I used the bean variable "#{pageFlowScope.fullExpressionEditor.categorySel.selected}".
The variable 'selected' is set to Boolean.TRUE in the bean. But in the UI the checkbox unchecked, strange!!
Regards,
-ab

Has anyone used JAAS with WebLogic?

Has anyone used JAAS with Weblogic? I was looking at their example, and I have a bunch of questions about it. Here goes:
Basically the problem is this: the plug-in LoginModule model of JAAS used in WebLogic (with EJB Servers) seems to allow clients to falsely authenticate.
Let me give you a little background on what brought me to this. You can find the WebLogic JAAS example (to which I refer below) in the pdf: http://e-docs.bea.com/wls/docs61/pdf/security.pdf . (I believe you want pages 64-74) WebLogic, I believe goes about this all wrong. They allow the client to use their own LoginModules, as well as CallBackHandlers. This is dangerous, as it allows them to get a reference (in the module) to the LoginContext's Subject and authenticate themselves (i.e. associate a Principal with the subject). As we know from JAAS, the way AccessController checks permissions is by looking at the Principal in the Subject and seeing if that Principal is granted the permission in the "policy" file (or by checking with the Policy class). What it does NOT do, is see if that Subject
has the right to hold that Principal. Rather, it assumes the Subject is authenticated.
So a user who is allowed to use their own Module (as WebLogic's example shows) could do something like:
//THEIR LOGIN MODULE (SOME CODE CUT-OUT FOR BREVITY)
public class BasicModule implements LoginModule
private NameCallback strName;
private PasswordCallback strPass;
private CallbackHandler myCB;
private Subject subj;
         //INITIALIZE THIS MODULE
           public void initialize(Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options)
                  try
                       //SET SUBJECT
                         subj = subject; //NOTE: THIS GIVES YOU REFERENCE
TO LOGIN CONTEXT'S SUBJECT
                                                 // AND ALLOWS YOU TO PASS
IT BACK TO THE LOGIN CONTEXT
                       //SET CALLBACKHANDLERS
                         strName = new NameCallback("Your Name: ");
                         strPass = new PasswordCallback("Password:", false);
                         Callback[] cb = { strName, strPass };
                       //HANDLE THE CALLBACKS
                         callbackHandler.handle(cb);
                  } catch (Exception e) { System.out.println(e); }
     //LOG THE USER IN
       public boolean login() throws LoginException
          //TEST TO SEE IF SUBJECT HOLDS ANYTHING YET
          System.out.println( "PRIOR TO AUTHENTICATION, SUBJECT HOLDS: " +
subj.getPrincipals().size() + " Principals");
          //SUBJECT AUTHENTICATED - BECAUSE SUBJECT NOW HOLDS THE PRINCIPAL
           MyPrincipal m = new MyPrincipal("Admin");
           subj.getPrincipals().add(m);
           return true;
         public boolean commit() throws LoginException
               return true;
    }(Sorry for all that code)
I tested the above code, and it fully associates the Subject (and its principal) with the LoginContext. So my question is, where in the process (and code) can we put the LoginContext and Modules so that a client cannot
do this? With the above example, there is no Security. (a call to: myLoginContext.getSubject().doAs(...) will work)
I think the key here is to understand JAAS's plug-in security model to mean:
(Below are my words)
The point of JAAS is to allow an application to use different ways of authenticating without changing the application's code, but NOT to allow the user to authenticate however they want.
In WebLogic's example, they unfortunately seem to have used the latter understanding, i.e. "allow the user to authenticate however they want."
That, as I think I've shown, is not security. So how do we solve this? We need to put JAAS on the server side (with no direct JAAS client-side), and that includes the LoginModules as well as LoginContext. So for an EJB Server this means that the same internal permission
checking code can be used regardless of whether a client connects through
RMI/RMI-IIOP/JEREMIE (etc). It does NOT mean that the client gets to choose
how they authenticate (except by choosing YOUR set ways).
Before we even deal with a serialized subject, we need to see how JAAS can
even be used on the back-end of an RMI (RMI-IIOP/JEREMIE) application.
I think what needs to be done, is the client needs to have the stubs for our
LoginModule, LoginContext, CallBackHandler, CallBacks. Then they can put
their info into those, and everything is handled server-side. So they may
not even need to send a Subject across anyways (but they may want to as
well).
Please let me know if anyone sees this problem too, or if I am just completely
off track with this one. I think figuring out how to do JAAS as though
everything were local, and then putting RMI (or whatever) on top is the
first thing to tackle.

Send this to:
newsgroups.bea.com / security-group.

Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8? What do I need to get/do? thanks

Has anyone used a Dell 1908FPb with a MacBook Pro OSX 10.6.8? What do I need to get/do? thanks

Hi 4judy,
If you are looking to use an external display with your MacBook Pro, you may find the following articles helpful:
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/ht3382
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
Regards,
- Brenden

TA26012 Has anyone used keyring 808 spy camera with an itouch and rendered with good results in final cut pro ?

I am using spy camera 808 which has the same 1280 by 720 H264 AAC as an itouch for filming.
Problems occour in fincal cut pro 6.06 on export if i export 808 on its own no issue the issue is the itouch messes up the time liine on sound video, example 20 min video 10 mins 808 and 10 mins itouch equals 12 mins.
So has anyone actualy with the power pc g5 and final cut pro 6.06 had a method where it is succseful for a simple export to quicktime ?
Just tried it with itouch in final cut and fcpro says does not match settings so i let fcpro choose audio needed render that was it export of 5 mins came out as 30 seconds.
So question stands has anyone found a suitable way to bring in itouch video and export in final cut with out issues.?
ps i brought the video in with "image capture" and iphoto no change.
email here if you would [email protected]

My plan is as follows:
-Make a full backup copy of System Drive on an external drive
-Boot from OS Install Disc > use Disk Utility to Erase/Write Zeros to drive
-Install Snow Leopard
-Install FCP, etc.
-Delete "Capture" directory from external "Scratch Disk"
-Transfer all remaining files to another external drive
-Reformat "Scratch Disk
-Cross fingers
-Begin transcoding process again---frequently checking files for errors
I'll let you know how it goes. Still open to other thoughts and suggestions...
-Ryan

Has anyone used Aperture 2.0 with 8800GT?

Has anyone used Aperture 2.0 with the new 8800GT? I'm about to order a new Mac Pro and wonder if Aperture will get a speed boost with the 8800GT over the HD 2600XT. I've read many times that Aperture is very GPU dependent, but then I've also read, on Barefeats.com for example, that the graphics card really doesn't do that much of a difference after all.
For me, on my dual 2.0 G5 with 4.5GB and a X800XT, what's been most annoying with Aperture 1.5 has been the slow load times for raw images (15-20MB). But now with the quick preview mode in Aperture 2.0, that really isn't an issue any more.
Is the 8800GT worth waiting for, or should I just get the Mac Pro now with the HD 2600XT?

Hi Don
I'm using Aperture 2.0 with the 8800GT. My system is the new MacPro 8 core 2.8GH with 10GB RAM. I'm shooting Nikon D3 lossless compressed RAW files. Approximately 12-14MB each.
I do not need to use the quick preview mode. Images open instantaneously,either fit to screen or 100%. All the image adjustments are shown with no time lag. My D2X uncompressed raw files,19MB, display in approximately one second with quick preview turned off.
I'm no MAC hardware expert so I don't know how much the speed is the result of the 8800GT but I'm just one happy camper.
Hope this helps
John Blake

Has anyone used Canon 5D Mark II with PrPro CS4 yet?

Hi,
Has anyone used the Canon 5D with CS4?
Do the files open ok?
Just wondering as I am going to hire the camera for a day as the footage is amazing!
Best wishes,
scott mackenzie

There are plenty of great threads on this material. As John points out, most will pop right up. Be sure to read replies by Jeff Bellune and also PaulieDC. This ARTICLE has some links to useful info on this camera.
Good luck,
Hunt

Has anyone used the new 5K retina iMac with Lightroom

Has anyone used Lightroom with the new 5K Imac. If so any problems ?

Just bought one - arrives next week. From what i can tell it's should be the fastest mac for lightroom. Processor speed is most vital. Doesn't really use all the mac pro multiple cores as I understand 4 is plenty (correct me pls?) and 16Gb ram should hopefully do it. Getting a raid thunderbolt 2 drive for image storage which will daisy chain with my eizo monitor. Choose 3tb internal fusion as I understand full SSD doesn't really help too much. 2GB graphics plenty unless you're doing video maybe?.
Only issue is I have a series of archive 3TB firewire 800 drives which are daisy chained. the questions is how will these work with an adapter but this remains to be seen....

Has anyone used the Seagate wireless plus with an iPad?

I would like to use this wireless external drive to store videos and then stream them to my iPad. Has anyone used this drive and if so how do you like it?

Hi everyone,
I am frustruated with the Seagate Wireless Plus. I think most of you just download movies in it and then watch it on your tablet. I thought this can be my external storage for everything including the content of my iPad. Not so easy!!! I can't see anything from the content of my iPad when I connect it wirelessly to Seagate. I wrote to Seagate and apparently there is another thing called WebDav in order to do it. I think Windows are winning here how easy it is to connect devices. Simply, I can see the demo stuff from the Seagate on my iPad but nothing the other way, no pictures, no music, no videos stored on my iPad can be seen from the Seagate. If there is somebody who can explain to me how to do it before I will return the Seagate to the retailer please do it in a way normal people understand. Don't say "I think" as most of people in these forums do, please say only "I know" and lead me step by step what to do. I have the latest iPad mini with iOS7, 32GB WiFi & Cellular with Retina display. I've already updated the Seagate OS to 2.2.0.005 exactly as they advise by installing the 2.1.0.014 prior to that.
Please forgive me for the tone but those 10 hours I spent so far without any results are too valuable to me.
Thanks in advance. Danny.

HT204387 Has anyone used their ip4 or higher with the text messaging sync system in the new ford cars it is call map

Has anyone used their ip4 or higher with the text messaging sync system in the new ford cars it is call map

Send this to:
newsgroups.bea.com / security-group.

Has anyone used a USB device server with a DAQmx or NI-VISA USB device?

Hi,
I have an application where I need to communicate with USB devices (some through DAQmx, others through NI-VISA) that will be more than 15 feet away from the controlling PC. I could use USB-ethernet-USB dongles, but I also see that there are USB-over-ethernet device servers available (like this one: http://www.usbgear.com/computer_cable_details.cfm?sku=USBNET-400&cats=104&catid=187%2C188%2C104%2C65...). Has anyone used these or similar USB device servers successfully with LabVIEW?
Thanks,
JasonP

http://forums.ni.com/t5/Multifunction-DAQ/Does-NI-offer-USB-extension-solutions/td-p/381873
http://forums.ni.com/t5/Dynamic-Signal-Acquisition/Using-a-quot-USB-2-0-extender-over-Cat-5-quot-to-...
http://forums.ni.com/t5/Multifunction-DAQ/Can-I-use-a-USB-Extender-with-USB-6008-or-cDAQ/td-p/920361
Let me know if you have any more questions.
Product Support Engineer
National Instruments

Has anyone used the invoxia NVX 620 for conference calling with iPhone

I am looking for a speaker systems with a very good mic. Tired the JBL Flip, not so good. Has anyone used or purchased the invoxia NVX 620 or the Audiooffice? Looking for recommendatons.
Thank you!

I just did a Google search and found several reviews on the first page.

Has anyone used FCE with a Sony hd-fx7 camcorder

As above, has anyone used FCE with a Sony hd-fx7 camcorder. I have recently got one of these at work and am currently using imovie for basic edits, but would like to step up to FCE, has anyone any experience using the two.
THanks

Hi, have MacBookPro 2,16 GHz and Sony HDR-FX7 and FCE 3.5 (German PAL)
- works good and fast
- But better don't try to use an external monitor on DVI connection
my system slows down if srubbing time line
- couldn't find out yet why

Has anyone used an app with the Maverick software to burn iPhoto slideshows to DVD disks that will play on any DVD player?

Has anyone used an app with the new Maverick software to burn iphoto slide shows to DVDs that will play on a standard DVD player? This probably cannot be a demo app in that the amout of photos on the slideshows is large.
Thank you,
Jim

Export the slideshow from iPhoto, that makes a movie of it.
Do you want to use this DVD in a domestic DVD player? If so, then the disk will have to be 'authored' to make it the correct form for that. If you have iDVD then that's the app you use. However, iDVD is no longer developed or distributed by Apple. You may be able to get it on an old iLIfe install disk.
Other options:
Burn: http://macupdate.com/app/mac/21992/burn
Toast: http://macupdate.com/app/mac/6351/toast-titanium
But there are lots of others too. Search on the App Store or MacUpdate

Has anyone used the Nokia 2700 as a modem with the Macbook 10.6.7

I have managed to sync my Nokia 2700 classic GSM handset to my Macbook through iSync. How can I use the phone as a modem if I have a 3G mobile service?
Many thanks in advance,
Dileep

louisfromleonia wrote:
Has anyone used the macbook air superdrive connected to a macbook pro - with a source DVD,via usb as a destination drive for burning DVDs?
I don't use the Apple SuperDrive but an LG GP08NU6W. works great! You can get one here:
http://www.amazon.com/LG-Electronics-GP08NU6W-External-Drive/dp/B003D1DESS
I got the white one.

Kingston memory - KVR13LSE9/8 - has anyone used with W520 Quad core?

Similar Messages

Maybe you are looking for