Kingston Technology HyperX 512MB PC4000 DDR DIMM Memory

Question

hi im getting 2 512mb of these and i dont know the correct timing and voltage...im using a MSI NEO 875P NEO board...it would be a great help thanks so much

Answer 1

hello, all
865PE Neo2-LS motherboar for memory dual channel kits:
DDR 400MHz, 1 of 4 banks, non-ECC, 184 PIN DIMM, PC3200
I want to Just PC3200 memory (I don't want to high memory: PC3500 or 4000),
so which's one good memory?
Corsair 1GB(2x512MB) 1x TWINX1024-3200C2 CL=2-3-3-6
Centon  1GB(2x512MB) 1GBDUALPC3200  CDC1G/IKVN CL=2.5 or CL=3
Kingston Hyperx 1GB(2x512MB) KHX3200AK2/1G CL=2-3-2-6-T1 --this is doesn't have my BIOS DRAM timings like T1
and i have questions
if I used centon memory, is will work good?
If I used corsair memory, is will work good?
what is CL=T1 for DRAM timing?
CL=TI is My BIOS doesn't have SDRAM Timing by SPD, just only they are have 5 DRAM Timings setting:
-CAS# Latency –[CAS Latency (CL)]= 2 clocks ,2.5 clocks ,3 clocks
-RAS# Precharge –[Minimum Row Pre-charge Time (tRP)]= 2 clocks, 3 clocks, 4 clocks.
-RAS# to CAS# Delay –[Minimum Ras to Cas Delay (tRCD)]= 2 clocks, 3 clocks, 4 clocks, .
-Precharge Delay –[Minimum Active to Pre-charge Time (tRAS)]= 5 clocks, 6 clocks, 7 clocks,8clocks, .
-Burst Length= 4, 8.
please, I need help....thanks