Kinit: init not found!

hey there,
i'm writing this from a livecd, as i can't boot into my archlinux-system anymore. everytime i'm getting this error:
initramfs completed - control passing to kinit
IP-config: no devices to configure
waiting 0s before mounting root device...
EXT3-fs: mounted filesystem in ordered data mode
kinit: Mounted root (ext3 filesystem) readonly
kjournald starting: commit interval 5 seconds
kinit: init not found!
Kernel panic - not syncing. Attempted to kill init!
i used to see this happening several times before, but then pressing the resetbutton two or three times did the trick. which by the way i found very curious but didn't had the enthusiasm to investigate further. (i know, that probably was a bad mistake)
lately no restarting no beating and no shouting seems to help anymore.
funny thing: i have two archlinux installations on my pc and BOTH bootprocesses end in the same kernel panic.
has anyone any idea or experienced anything similar before?
thanks a lot
Last edited by calle (2009-05-14 16:49:10)

phrakture wrote:
booting isolinux via grub seems sketchy at best.
But, I can tell you this (if it helps). "init not found" means that it cannot find /bin/init on the root filesystem. This usually means that it can't MOUNT the root filesystem (the CD itself).
or mount the HDD partition which is the root fs image of the CD on the HDD ,
if thats what he is attempting to do ... i.e. boot CD image from HDD.
Last edited by keratos (2008-05-08 21:39:13)

Similar Messages

  • Method init not found in class oracle.apps.fnd.cp.request.C

    Hi all,
    I am reffering to Oracle Application Framework Developer’s Guide Release
    11.5.10 RUP3 December 2, 2005
    As given in the document (page 275) Concurrent Processing: Request Submission
    and Monitoring ,I want the Concurrent Processing Request Submission and Monitoring user interfaces available on my OA Framework-based pages.
    I have followed the steps given in the OADevGuide but when the custom CO
    is compiled it gives following error.
    method <init> not found in class oracle.apps.fnd.cp.request.ConcurrentRequest.
    The import statement in our code is as followed
    import oracle.apps.fnd.cp.request.ConcurrentRequest;
    import oracle.apps.fnd.cp.request.RequestSubmissionException;
    wheather I have to open a SR on metalink asking for an updated file ConcurrentRequest.class ?
    Thanks in advance,
    Anant.

    Hi All,
    Thanks Prabhat for that update.
    Thanks tapashray cause u r update on thread Apply not being caught in debugger helped me a lot.
    Right now I am facing a different problem.
    On click of submit button The page gets called but it gives error as
    oracle.apps.fnd.framework.OAException: Could not load application module 'oracle.apps.fnd.cp.srs.server.RequestAM'.
    In myprojects folder under oracle dir at reqd path I have this AM .
    Whether I need to add the bc4j pkg "oracle.apps.fnd.cp.srs.server.RequestAM" in my project . I dont think so as I am not extending any class/VO or doing any substitution.
    my code is as followed
    public void processFormData(OAPageContext pageContext, OAWebBean webBean)
    System.out.println("Inside ProcessFormData");
    if (pageContext.getParameter("Submit")!= null )
    System.out.println("Inside Submit ");
    try
    // get the JDBC connection
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    //Connection conn = (Connection)am.getOADBTransaction();
    OADBTransaction conn = am.getOADBTransaction();
    System.out.println("OADBTransaction conn "+conn);
    ConcurrentRequest cr = new ConcurrentRequest(conn.getJdbcConnection());
    System.out.println(" ConcurrentRequest cr "+cr);
    cr.setDeferred();
    // call submit request
    Vector param = new Vector();
    String selectedValue = pageContext.getParameter("reportList");
    System.out.println("selectedValue -> "+selectedValue);
    param.add(selectedValue);
    System.out.println("before cr.submitRequest ");
    int reqId = cr.submitRequest("SQLGL", "RGFSGXML", "Run FSG and XML Publisher",null, false, param);
    // int reqId = cr.submitRequest("SYSADMIN", "FNDSCURS", "User Responsibility Report",null, false, param);
    System.out.println("After cr.submitRequest reqId "+reqId);
    conn.commit();
    System.out.println("After commit");
    // redirect page to Request Scheduling page
    HashMap parameters = new HashMap();
    String url = "OA.jsp";
    parameters.put("akRegionApplicationId", "0");
    parameters.put("akRegionCode", "FNDCPPROGRAMPAGE");
    String id = "" + reqId + "";
    parameters.put("requestMode", "DEFERRED");
    parameters.put("requestId", id);
    System.out.println("before page forward ");
    pageContext.setForwardURL("BSE_CONC_REQUEST"
    ,OAWebBeanConstants.KEEP_MENU_CONTEXT
    ,null
    ,parameters
    ,true
    ,OAWebBeanConstants.ADD_BREAD_CRUMB_NO
    ,OAWebBeanConstants.IGNORE_MESSAGES);
    catch(RequestSubmissionException reportError)
    System.out.println("RequestSubmissionException raised "+reportError.getStackTrace());
    catch(SetDeferredException deferred)
    System.out.println("SetDeferredException raised "+deferred.getStackTrace());
    super.processFormData(pageContext,webBean);
    Hope I have given all the details.
    Regards,
    Anant.
    Message was edited by: Removed the error stack so that thread details remain on the same page
    Anant

  • Kinit: Client not found in Kerberos database while getting initial credentials

    Hi all,
    I am trying to configure application which uses Kerberos authentication.
    Error message: 
    kinit: Client not found in Kerberos database while getting initial credentials
    I use Windows Server 2003 domain controller as LDAP server, Tomcat application (on Linux) and IIS application as client, and apache load balancer.
    There is multidomain environment:  russia.domain.net, europa.domain.net, asia.domain.net;
    Tomcat and IIS servers works behind a proxy server (Apache on Linux). 
    For applications created two DNS  records type A. all DNS use IP address of Apache proxy server:
    application-sandbox.russia.domain.net
    applicationweb-sandbox.russia.domain.net
    To confiure kerberos authentication i have performed the following steps:
    1. Create user account in EUROPA domain and configure delegation for this:
    EUROPE\application_sandbox
    2. Register SPN for this account:
    setspn -A HTTP/application-sandbox.russia.domain.net EUROPE\application_sandbox
    setspn -A HTTP/application-sandbox EUROPE\application_sandbox
    3. After i verified registered SPN for this account:
    setspn.exe -L EUROPE\application_sandbox
    Registered ServicePrincipalNames for CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net:
            HTTP/application-sandbox
            HTTP/application-sandbox.russia.domain.net
    3. After i generate a keytab file:
    ktpass /princ HTTP/application-sandbox.russia.domain.net:@RUSSIA.DOMAIN.NET /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass Pa$$w0rd
    4. Properties of account looks like the following:
    Get-ADUser -Identity appication_sandbox -Properties CN, ServicePrincipalNames, UserPrincipalName
    CN : kxxb999
    DistinguishedName : CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net
    Enabled : True
    GivenName :
    Name : kxxb999
    ObjectClass : user
    SamAccountName : application_sandbox
    ServicePrincipalNames : {HTTP/application-sandbox, HTTP/application-sandbox.russia.domain.net}
    Surname : application_sandbox
    UserPrincipalName : HTTP/[email protected]
    4.Note that CN and User logon name are different. SPN registered for DNS record.
    There are no computer in domain with name application-sandbox.russia.domain.net. this is a DNS record for application.
    5. Then i copy keytab file to Linux machine, configure krb5.conf file and trying to get TGT for registered principal name.
    krb5.conf file:
    [libdefaults]
    default_realm = EUROPE.DOMAIN.NET
    dns_lookup_realm = false
    dns_lookup_kdc = false
    default_tkt_enctypes = rc4-hmac
    default_tgs_enctypes = rc4-hmac
    [realms]
    RUSSIA.DOMAIN.NET = {
    kdc = dc01.russia.domain.net
    admin_server = dc01.russia.domain.net
    default_domain = russia.domain.net
    EUROPE.DOMAIN.NET = {
    kdc = dc01.europe.domain.net
    admin_server = dc01.europe.domain.net
    default_domain = europe.domain.net
    [domain_realm]
    europe.domain.net = EUROPE.DOMAIN.NET
    .europe.domain.net = EUROPE.DOMAIN.NET
    russia.domain.net = RUSSIA.DOMAIN.NET
    .russia.domain.net = RUSSIA.DOMAIN.NET
    [appdefaults]
    autologin = true
    forward = true
    forwardable = true
    encrypt = true
    Then i verified created keytab file:
    klist -e -k -t application_sandbox.keytab
    Keytab name: FILE:application_sandbox.keytab
    KVNO Timestamp Principal
    0 01/01/70 01:00:00 HTTP/[email protected] (arcfour-hmac)
    And trying to get TGT ticket:
    kinit -V -k -t application_sandbox.keytab HTTP/[email protected]
    Using default cache: /tmp/krb5cc_0
    Using principal: HTTP/[email protected]
    Using keytab: application_sandbox.keytab
    kinit: Client not found in Kerberos database while getting initial credentials
    But if i use SamAccountName name with kinit commant then i can aquire TGT ticket:
    [root@localhost security]# kinit application_sandbox
    Password for [email protected]:
    [root@localhost security]# klist
    Ticket cache: FILE:/tmp/krb5cc_0
    Default principal: [email protected]
    Valid starting Expires Service principal
    06/30/14 16:37:41 07/01/14 02:37:38 krbtgt/[email protected]
    renew until 07/01/14 16:37:41
    I'm in trouble. can anyone faced this problem?
    Thank you

    Hi all,
    according to Amy answer I thought, how user principal could  not be found in Kerberos database, e.g AD domain.
    My HTTP service works in RUSSIA domain, but user principal created in EUROPE domain.
    Next, i have checked my ktpass command:
    ktpass /princ HTTP/[email protected] /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass
    Pa$$w0rd
    especially  the following parameters:
    /princ HTTP/[email protected]
    /mapuser EUROPE\application_sandbox
    When generating keytab it changes userlogon name to HTTP/application-sandbox.russia.domain.net and set domain domain to RUSSIA.DOMAIN.NET
    But no user principal with name application_sandbox in RUSSIA.DOMAIN.NET domain (e.g. Kerberos realm)
    So solution is change RUSSIA.DOMAIN.NET to EUROPE.DOMAIN.NAME in ktpass command.
    After that i am able to get TGT and authenticate in domain.

  • 8820: Symbol EventInjector$KeyEvent. init not found

    Hi
     I am creating a custom application for blackberry which uses the EventInjector API and more precisely the following code:
     EventInjector.KeyEvent inject = new EventInjector.KeyEvent(EventInjector.KeyEvent.KEY_DOWN,Characters.ESCAPE,50);inject.post(); inject.post();
    The code works on the Bold and on all the devices I tried through the simulator but does not work for the 8820.
    The error I get is when I try to start the application and is:
    Symbol EventInjector$KeyEvent.<init> not found
    I am not sure what I am missing, permissions are wide open for the Application itself. Any Ideas?
    Any help would be appreciated.
    Thx
    xtos

    please refer infoDoc#89603, recompile the program will resolve the issue, then could you please send your app sample code to me ([email protected]) so that I can made the doc more perfect.

  • Init not found

    It might be me but I think my computer is trying to make my life misserable. I've had Arch working on my Pentium 3 witch runs with an 450mhz processor. But yesterday I recieved a new HDD cause my "old" one had some unrepaireble errors.
    I reinstalled Arch again the way it's supposed to be done (and the last time it worked).. But this time I get the following errors Note: I didn;t get all of the error messages since they went away to fast):
    Sontreset failed.
    SRST failed
    init not found
    atkbd.c: Spurious ack on isa006/serio0 some program might me trying access hardware directly
    What's going on here? The last error continues to turn up. I don;t get in linux. The same happens at ArchbLinux Falback
    yours,
    Bernhard

    Hi Bernie,
    I have the same problem...I am searching a few days and cannot find the soluton.
    This is confusing:
    piix/ata_piix (Intel chipsets) - IMPORTANT
    If you have enabled ide/pata/sata HOOKs in /etc/mkinitcpio.conf the 'ata_piix' module will be used.
    This may cause your devices to shift names, eg:
    - IDE: devices from hd? to sd?
    And now:
    You can get the old hda names back by appending 'earlymodules=piix' to your kernel commandline
    > this means we can use hdax back in grub and in fstab ?
    > 'earlymodules=piix' is an option for piix users ? Or are we obliged to add it ?

  • [Solved] Init not found for new kernels

    Hello everyone,
    I am experiencing this error message when booting using either the linux-3.7.x or linux-ck-3.8.x kernels. I would investigate towards something being wrong with systemd (i.e. the init= line suggested), but the system boots perfectly fine using linux-lts-3.0.56.1.
    Relevant information I can think of:
    / is ext4, LVM. The lvm -3 update has not been done yet.
    mkinitcpio 0.13.0-1
    I am mostly interested in any direction towards what to investigate -- the fact that there is something wrong with the init not being found, but only for certain kernels, perplexes me.
    Thanks for any help,
    Jan
    (My apologies for the quality.)
    http://i.imgur.com/Tv276ds.jpg
    -- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
    Last edited by Zuiop (2013-03-06 20:35:51)

    /usr is on /.
    Here is what lsinitcpio gives me. They all include /usr/bin/init, and in fact the same init related things.
    ~ /boot for i in initramfs-linux-lts.img initramfs-linux.img initramfs-linux-ck.img ; do
    print $i
    lsinitcpio $i | grep init
    done
    initramfs-linux-lts.img
    ./init
    ./init_functions
    ./usr/bin/init
    ./usr/lib/udev/rules.d/11-dm-initramfs.rules
    ./etc/initrd-release
    initramfs-linux.img
    ./init
    ./init_functions
    ./usr/bin/init
    ./usr/lib/udev/rules.d/11-dm-initramfs.rules
    ./etc/initrd-release
    initramfs-linux-ck.img
    ./init
    ./init_functions
    ./usr/bin/init
    ./usr/lib/udev/rules.d/11-dm-initramfs.rules
    ./etc/initrd-release
    Full output (is there a spoiler tag? couldn't find one)
    http://paste.kde.org/688802/
    Thanks for your continuing help!

  • /sbin/init not found after Solaris10-x86 first reboot

    Hello all,
    I just installed Solaris 10 on a x86. Nothing seemed to go awry, AFAIK.
    After the very first reboot it fails to boot with this:
    WARNING: exec(/sbin/init) file not found
    (Could not start init)
    Press any key to reboot.
    So I'm stuck, it seems.
    It does not seem that the / slice is missing as I guess I'd have a totally different error message, something like "could not mount root fs", I dunno.
    I'm sure that if I could boot the install DVD in single mode I'd be able to go and really check if /sbin/init really exists.
    Except that... I'm used to Sparc with its OPB, dunno how to get x86's equivalent to OpenBoot.
    Anyway, anyone came across the same "missing file" problem after initial install, and if so, how did you get out of it ?
    Bonus question, is there an equivalent to OpenBoot on x86 and how to reach it ?
    Before you ask.. this PC ran on Solaris 9/x86 a looooong time ago, no hardware changes, so no need to send me to the HCL :)
    Thanks,
    Jeff

    WARNING: exec(/sbin/init) file not foundSorry, can't help you with this since I never encountered such an error.
    Except that... I'm used to Sparc with its OPB, dunno
    how to get x86's equivalent to OpenBoot.That would be the configuration manager. Its the question you get in the beginning where it asks you what image to boot ('press b or enter to boot normally'). If you press escape there you get into the section where you can determine the default boot device and add new hardware drivers when needed.

  • [SOLVED] Kernel panic at boot due to root FS not found

    When I try to boot using a new kernel version (eg. 3.0.1 or 2.6.39), I get a kernel panic with an "init not found" error message. I haven't been able to get any more detailed error messages, but I assume that there's a problem with finding or mounting my root filesystem.
    For now, I'm stuck with 2.6.38.7-1, which boots without any problems. (I keep trying the new kernel, then rolling it back using a Live CD.)
    I have a shared EXT4 root and boot partition, and I'm using Grub 0.97. Other than that, I'm not sure what information would be helpful in tracking down this problem, and any help would be appreciated.
    Last edited by dcecile (2011-08-10 00:41:46)

    No problem.
    Here's my full Grub. It has a lot of trial-and-error entries, and I made *-old copies of my 2.6.38 kernel files:
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
    # general configuration:
    timeout 2
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    title Arch Linux
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/initramfs-linux.img
    title Arch Linux Fallback
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/initramfs-linux-fallback.img
    title Arch Linux Ext4
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/initramfs-linux-ext4.img
    title Arch Linux Log
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
    initrd /boot/initramfs-linux.img
    title Arch Linux Break
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro rootwait break=y panic=30 vga=0x318
    initrd /boot/initramfs-linux.img
    title Arch Linux Nonboot Log
    root (hd0,2)
    kernel /vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
    initrd /initramfs-linux.img
    title Arch Linux Baduuid Log
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/1ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
    initrd /boot/initramfs-linux.img
    title Arch Linux LTS
    root (hd0,2)
    kernel /boot/vmlinuz26-lts root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/kernel26-lts.img
    title Arch Linux LTS Fallback
    root (hd0,2)
    kernel /boot/vmlinuz26-lts root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/kernel26-lts-fallback.img
    title Arch Linux LTS Log
    root (hd0,2)
    kernel /boot/vmlinuz26-lts root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
    initrd /boot/kernel26-lts.img
    title Arch Linux Old
    root (hd0,2)
    kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/kernel26-old.img
    title Arch Linux Old Fallback
    root (hd0,2)
    kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/kernel26-old-fallback.img
    title Arch Linux Old Log
    root (hd0,2)
    kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro debug rootdelay=5 panic=30 ignore_loglevel vga=0x318
    initrd /boot/kernel26-old.img
    title Windows
    rootnoverify (hd0,0)
    makeactive
    chainloader +1
    This is the 3.0 entry that doesn't work:
    title Arch Linux
    root (hd0,2)
    kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/initramfs-linux.img
    And this is the 2.6.38 entry that does work:
    title Arch Linux Old
    root (hd0,2)
    kernel /boot/vmlinuz26-old root=/dev/disk/by-uuid/2ec8f74e-3268-45d0-ae20-9ee94d1c983b ro panic=30 vga=0x318
    initrd /boot/kernel26-old.img
    Here's "lsinitcpio /boot/initramfs-linux.img":
    ./etc
    ./etc/udev
    ./etc/udev/udev.conf
    ./etc/modprobe.d
    ./etc/modprobe.d/usb-load-ehci-first.conf
    ./init
    ./init_functions
    ./bin
    ./bin/busybox
    ./sys
    ./proc
    ./dev
    ./hooks
    ./hooks/udev
    ./run
    ./config
    ./usr
    ./usr/bin
    ./usr/sbin
    ./lib
    ./lib/udev
    ./lib/udev/usb_id
    ./lib/udev/firmware
    ./lib/udev/scsi_id
    ./lib/udev/path_id
    ./lib/udev/ata_id
    ./lib/udev/rules.d
    ./lib/udev/rules.d/50-udev-default.rules
    ./lib/udev/rules.d/80-drivers.rules
    ./lib/udev/rules.d/50-firmware.rules
    ./lib/udev/rules.d/60-persistent-storage.rules
    ./lib/modules
    ./lib/modules/3.0-ARCH
    ./lib/modules/3.0-ARCH/modules.alias.bin
    ./lib/modules/3.0-ARCH/modules.symbols.bin
    ./lib/modules/3.0-ARCH/kernel
    ./lib/modules/3.0-ARCH/kernel/fs
    ./lib/modules/3.0-ARCH/kernel/fs/ext4
    ./lib/modules/3.0-ARCH/kernel/fs/ext4/ext4.ko.gz
    ./lib/modules/3.0-ARCH/kernel/fs/mbcache.ko.gz
    ./lib/modules/3.0-ARCH/kernel/fs/jbd2
    ./lib/modules/3.0-ARCH/kernel/fs/jbd2/jbd2.ko.gz
    ./lib/modules/3.0-ARCH/kernel/sound
    ./lib/modules/3.0-ARCH/kernel/sound/core
    ./lib/modules/3.0-ARCH/kernel/sound/core/seq
    ./lib/modules/3.0-ARCH/kernel/sound/core/seq/snd-seq-device.ko.gz
    ./lib/modules/3.0-ARCH/kernel/sound/core/snd.ko.gz
    ./lib/modules/3.0-ARCH/kernel/sound/core/snd-rawmidi.ko.gz
    ./lib/modules/3.0-ARCH/kernel/sound/soundcore.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers
    ./lib/modules/3.0-ARCH/kernel/drivers/ata
    ./lib/modules/3.0-ARCH/kernel/drivers/ata/libata.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/ata/ahci.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/ata/libahci.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/usb
    ./lib/modules/3.0-ARCH/kernel/drivers/usb/core
    ./lib/modules/3.0-ARCH/kernel/drivers/usb/core/usbcore.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/usb/host
    ./lib/modules/3.0-ARCH/kernel/drivers/usb/host/uhci-hcd.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/usb/host/ehci-hcd.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/video
    ./lib/modules/3.0-ARCH/kernel/drivers/video/backlight
    ./lib/modules/3.0-ARCH/kernel/drivers/video/backlight/lcd.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/video/fb_sys_fops.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/video/sysimgblt.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/video/syscopyarea.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/video/sysfillrect.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/input
    ./lib/modules/3.0-ARCH/kernel/drivers/input/ff-memless.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/scsi
    ./lib/modules/3.0-ARCH/kernel/drivers/scsi/sd_mod.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ezkey.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sjoy.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gyration.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-samsung.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-lcpower.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kye.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-dr.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-wacom.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-keytouch.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-uclogic.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cherry.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kovaplus.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zpff.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-elecom.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-common.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-arvo.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-waltop.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-pyra.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-picolcd.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-twinhan.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-emsff.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sunplus.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-apple.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-topseed.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-chicony.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-magicmouse.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cypress.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kensington.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kone.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-axff.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-multitouch.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-logitech.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-petalynx.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-prodikeys.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid/usbhid.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sony.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zydacron.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-koneplus.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gaff.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-microsoft.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-monterey.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ntrig.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-belkin.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-pl.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-a4tech.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ortek.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-quanta.ko.gz
    ./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-tmff.ko.gz
    ./lib/modules/3.0-ARCH/kernel/lib
    ./lib/modules/3.0-ARCH/kernel/lib/crc16.ko.gz
    ./lib/modules/3.0-ARCH/modules.dep.bin
    ./sbin
    ./sbin/blkid
    ./sbin/udevadm
    ./sbin/modprobe
    ./sbin/udevd

  • I am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found

    i am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found.

    "command not found" means ... there is no such thing.
    Has the .rpm been installed?
    http://docs.oracle.com/cd/E17781_01/install.112/e18802/toc.htm#XEINL122

  • Service ticket not found in the subject

    Hi,
    I've got simple authorisation working from Java to an Linux MIT KDC. I've also got tickets via kinit from the kdc on the Linux server. I'm trying to use JAAS sample code:
    Does anyone know how I can get this to work?
    MY login.conf file is
    GSSClient{
    com.sun.security.auth.module.Krb5LoginModule required
    useTicketCache="true";
    Rserver{
    com.sun.security.auth.module.Krb5LoginModule required
    storeKey=true
    useKeyTab=true
    doNotPrompt=true
    keyTab="/etc/harsh.keytab"
    principal="Rserver/kdc.mahindrabt.com";
    and the error which i am getting is i have enable debug
    ratnesh
    Name of the [email protected]
    before peerlc.login()
    KinitOptions cache name is /tmp/krb5cc_0
    DEBUG <CCacheInputStream> client principal is [email protected]
    DEBUG <CCacheInputStream> server principal is krbtgt/[email protected]
    DEBUG <CCacheInputStream> key type: 16
    DEBUG <CCacheInputStream> auth time: Thu Dec 18 15:20:02 IST 2003
    DEBUG <CCacheInputStream> start time: Thu Dec 18 15:20:02 IST 2003
    DEBUG <CCacheInputStream> end time: Fri Dec 19 01:20:02 IST 2003
    DEBUG <CCacheInputStream> renew_till time: Thu Jan 01 05:30:00 IST 1970
    CCacheInputStream: readFlags() INITIAL;Host address is 10.3.1.110
    DEBUG <CCacheInputStream>
    DEBUG <CCacheInputStream> client principal is [email protected]
    DEBUG <CCacheInputStream> server principal is host/[email protected]
    DEBUG <CCacheInputStream> key type: 1
    DEBUG <CCacheInputStream> auth time: Thu Dec 18 15:20:02 IST 2003
    DEBUG <CCacheInputStream> start time: Thu Dec 18 16:17:13 IST 2003
    DEBUG <CCacheInputStream> end time: Fri Dec 19 01:20:02 IST 2003
    DEBUG <CCacheInputStream> renew_till time: Thu Jan 01 05:30:00 IST 1970
    CCacheInputStream: readFlags()Host address is 10.3.1.110
    DEBUG <CCacheInputStream>after peerlc.login()
    prior to subject.doAs()
    value of s isSubject:
    Principal: [email protected]
    Private Credential: Ticket (hex) =
    0000: 61 82 01 06 30 82 01 02 A0 03 02 01 05 A1 10 1B a...0...........
    0010: 0E 4D 41 48 49 4E 44 52 41 42 54 2E 43 4F 4D A2 .MAHINDRABT.COM.
    0020: 23 30 21 A0 03 02 01 00 A1 1A 30 18 1B 06 6B 72 #0!.......0...kr
    0030: 62 74 67 74 1B 0E 4D 41 48 49 4E 44 52 41 42 54 btgt..MAHINDRABT
    0040: 2E 43 4F 4D A3 81 C3 30 81 C0 A0 03 02 01 01 A1 .COM...0........
    0050: 03 02 01 01 A2 81 B3 04 81 B0 CB 01 79 E9 43 1A ............y.C.
    0060: AE 64 90 28 83 D6 79 82 6A 4C 26 08 A9 C2 59 E7 .d.(..y.jL&...Y.
    0070: 21 2E 4C 41 81 B5 01 75 9A 24 87 C0 30 3B F9 A7 !.LA...u.$..0;..
    0080: 6B 4E 5D 29 5D A0 9F 91 55 92 D6 FD E4 4B 0A 84 kN])]...U....K..
    0090: 06 5B 07 14 00 7E 96 C6 2F 15 4B 34 9F D6 0D E2 .[....../.K4....
    00A0: 89 48 B3 78 63 B8 A0 B0 81 14 28 A8 3F 29 A5 D7 .H.xc.....(.?)..
    00B0: 64 D5 40 B7 19 A8 6D FC F2 82 86 02 C5 13 32 AA [email protected].
    00C0: A8 42 A5 8B 3D 52 DB 83 C7 1F 19 31 3E 6C 87 B0 .B..=R.....1>l..
    00D0: BD A5 6A 26 8E DB 2C EA F5 06 2F 90 0A DA 77 58 ..j&..,.../...wX
    00E0: CC 0A 67 27 4E 51 7D 74 50 08 79 E4 06 EA C9 30 ..g'NQ.tP.y....0
    00F0: E4 F8 40 51 F5 D9 FA C1 AF D9 D3 2E 4A 32 59 CC [email protected].
    0100: 10 1A 0F AA 7D 98 30 9B A7 26
    Client Principal = [email protected]
    Server Principal = krbtgt/[email protected]
    Session Key = EncryptionKey: keyType=16 keyBytes (hex dump)=
    0000: 9B B5 0E FB 8F 49 64 8F 32 31 10 AE 6E A8 BA 80 .....Id.21..n...
    0010: C4 16 45 4A 92 34 A1 02
    Forwardable Ticket false
    Forwarded Ticket false
    Proxiable Ticket false
    Proxy Ticket false
    Postdated Ticket false
    Renewable Ticket false
    Initial Ticket false
    Auth Time = Thu Dec 18 15:20:02 IST 2003
    Start Time = Thu Dec 18 15:20:02 IST 2003
    End Time = Fri Dec 19 01:20:02 IST 2003
    Renew Till = Null
    Client Addresses clientAddresses[0] = /10.3.1.110
    GSSClient... Getting client credentialsFound ticket for [email protected] to go to krbtgt/[email protected] expiring on Fri Dec 19 01:20:02 IST 2003
    GSSClient... GSSManager creating security context
    GSSClient... Sending token to server over secure contextEntered Krb5Context.initSecContext with state=STATE_NEW
    Found ticket for [email protected] to go to krbtgt/[email protected] expiring on Fri Dec 19 01:20:02 IST 2003
    Service ticket not found in the subject
    Credentials acquireServiceCreds: same realm
    CksumType: sun.security.krb5.internal.crypto.RsaMd5CksumTypeKrbException: KDC has no support for encryption type (14)
    at sun.security.krb5.internal.crypto.p.a(DashoA6275:58)
    at sun.security.krb5.EncryptedData.<init>(DashoA6275:84)
    at sun.security.krb5.KrbApReq.b(DashoA6275:438)
    at sun.security.krb5.KrbApReq.a(DashoA6275:211)
    at sun.security.krb5.KrbApReq.<init>(DashoA6275:172)
    at sun.security.krb5.KrbTgsReq.a(DashoA6275:319)
    at sun.security.krb5.KrbTgsReq.<init>(DashoA6275:166)
    at sun.security.krb5.KrbTgsReq.<init>(DashoA6275:87)
    at sun.security.krb5.internal.az.a(DashoA6275:289)
    at sun.security.krb5.internal.az.a(DashoA6275:106)
    at sun.security.krb5.Credentials.acquireServiceCreds(DashoA6275:490)
    at sun.security.jgss.krb5.Krb5Context.initSecContext(Krb5Context.java:580)
    at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:213)
    at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:158)
    at GSSClient.run(GSSClient.java:184)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAs(Subject.java:320)
    at GSSClient.login(GSSClient.java:124)
    at GSSClient.main(GSSClient.java:63)
    GSSClient... GSS Exception No valid credentials provided (Mechanism level: KDC has no support for encryption type (14))after to getting context
    Client authentication deined..
    If i dosnt do kinit it work fine
    Cheers
    Harsh Ahuja

    I think you do have a ticket in your subject, problem is that they ar'nt readable by suns core librarys. Sun seems to lack suport for des3-cbc-sha1. Try creating tickets with des-cbc-crc.
    wikm@empusa:~$ klist -a
    Credentials cache: FILE:/tmp/krb5cc_1001
    Principal: [email protected]
    Cache version: 4
    Server: krbtgt/[email protected]
    Ticket etype: des-cbc-crc, kvno 1
    Auth time: Dec 22 15:31:03 2003
    End time: Dec 23 01:31:03 2003
    Ticket flags: initial
    Addresses: IPv4:130.237.95.15
    Server: [email protected]
    Ticket etype: des-cbc-crc, kvno 2
    Auth time: Dec 22 15:31:03 2003
    End time: Dec 23 01:31:03 2003
    Ticket flags:
    Addresses: IPv4:130.237.95.15
    / Mikael

  • File not found error

    I get the following error, but don't know why it can't find the file. Is there anything in this script that would call "\" instead of "/"? Is there any line of code that will switch a wayward "\" back?
    01-09-24 09:37:02 - path="" :jsp: init
    2001-09-24 09:43:42 - path="" :LoginServlet: init
    2001-09-24 09:44:15 - path="" :CourseServlet: init
    2001-09-24 09:46:48 - path="" :LessonServlet: init
    2001-09-24 09:46:54 - path="" :Error: /usr/local/apache/sites/tesco.spinweb.net/htdocs/cmi/courses\Food Service/Intro/AU00.html (No such file or directory)
    The script is below. Thanks for any help anyone can provide me.
    import cmi.xml.AU;
    import cmi.xml.Block;
    import cmi.xml.CourseReader;
    import cmi.xml.CSFElement;
    import java.io.BufferedReader;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileNotFoundException;
    import java.io.FileReader;
    import java.io.IOException;
    import java.io.ObjectInputStream;
    import java.io.PrintWriter;
    import java.sql.Connection;
    import java.sql.DriverManager;
    import java.sql.ResultSet;
    import java.sql.SQLException;
    import java.util.Enumeration;
    import java.util.Hashtable;
    import java.util.Vector;
    import javax.servlet.ServletConfig;
    import javax.servlet.ServletException;
    import javax.servlet.ServletOutputStream;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpServletResponse;
    import javax.servlet.http.HttpSession;
    import javax.servlet.http.HttpServlet;
    import org.jdom.JDOMException;
    public class LessonServlet extends HttpServlet
    public void init (ServletConfig config) throws ServletException
    super.init (config);
    try {
                   Class.forName (GlobalData.DatabaseDriverName);
                   _jdbcConnection = DriverManager.getConnection (GlobalData.DatabaseName, "tesco", "scorm");
    _jdbcConnection.setAutoCommit (true);
    //should I do this?
    //_jdbcConnection.setAutoCommit (false);
    //load serialized course data
    loadCourseData();
              catch (Exception xcp) {
                   xcp.printStackTrace();     
                   getServletContext().log("Error: " + xcp.getMessage());     
    public void doGet( HttpServletRequest request,
                             HttpServletResponse response)
              throws ServletException, IOException
    boolean normalMode = true;
    try {
    HttpSession session = request.getSession (true);
    //can I load the session given the id??
    //System.out.println ("Lesson.valid session " + session.getId() + ": " + request.isRequestedSessionIdValid());
    response.setContentType ("text/html");
    JDBCHelper dbHelper = new JDBCHelper (_jdbcConnection);
    //get student ID
    Integer studentID = (Integer) session.getAttribute ("studentID");
    //get course ID
    Integer courseID = (Integer) session.getAttribute ("courseID");
    //get lesson ID
    String lessonID = request.getParameter ("lessonID");
    if (lessonID == null) {
    lessonID = (String) session.getAttribute ("lessonID");
    if (studentID == null || courseID == null || lessonID == null) {
    //reset session data by re-logging the user
    sendProfileError (response.getOutputStream());
    return;
    //store lesson ID in session
    session.setAttribute ("lessonID", lessonID);
    String auID = request.getParameter ("auID");
    String mode = request.getParameter ("mode");
    if (mode != null) {
    session.setAttribute ("mode", mode);
    else {
    mode = (String) session.getAttribute ("mode");
    if (mode.equalsIgnoreCase ("review")) {
    normalMode = false;
    else {
    normalMode = true;
    //synchronize access to course hash table
    synchronized (_courseHash)
    //make sure _courseHash is in tact
    if (_courseHash == null) {
    //try reloading it....
    loadCourseData();
    if (_courseHash == null) {
    //error
    response.getOutputStream().close();
    throw new IOException ("Corrupt course data");
    if (! _courseHash.containsKey (courseID.toString())) {
    //try reloading it....
    loadCourseData();
    if (! _courseHash.containsKey (courseID.toString())) {
    //error
    response.getOutputStream().close();
    throw new IOException ("Corrupt course data (course not found)");
    if (auID == null) {
    //show course menu
    Hashtable hash = (Hashtable) _courseHash.get (courseID.toString());
    sendAvailableAUs (hash, studentID.intValue(), courseID.intValue(), lessonID, response.getOutputStream(), response, dbHelper);
    return;
    //if AU has not been attempted, initialize it
    Integer auDataID = new Integer (getAUDataID (studentID.intValue(), courseID.intValue(), lessonID, auID, dbHelper));
    //if (getAUDataID (studentID.intValue(), courseID.intValue(), lessonID, auID, dbHelper) == -1) {
    if (auDataID.intValue() == -1) {
    int newID = initializeAUData (studentID.intValue(), courseID.intValue(), lessonID, auID, dbHelper);
    dbHelper.addAUToPath (studentID.intValue(), courseID.intValue(), lessonID, auID);
    auDataID = new Integer (newID);
    session.setAttribute ("AUID", auID);
    session.setAttribute ("AUDataID", auDataID);
    sendAU (studentID.intValue(), courseID.intValue(), lessonID, auID, auDataID.intValue(), normalMode, response.getOutputStream(), dbHelper);
    //to do: detailed messages should be sent to the client depending on which
    // exception was thrown. Don't have one try/catch....have one for each situation
    catch (Exception e) {
    e.printStackTrace();
                   getServletContext().log("Error: " + e.getMessage());
    public void destroy()
              try {
                   if (_jdbcConnection != null) {
                        _jdbcConnection.close();
              catch (Exception ignored) {}
    private int initializeAUData (int studentID, int courseID, String lessonID, String auID, JDBCHelper dbHelper)
    String sqlQuery = null;
    ResultSet results = null;
    try {
    //get student's name
    sqlQuery = "SELECT Full_Name" +
    " FROM " + GlobalData.StudentTable +
    " WHERE Student_ID = " + studentID;
    results = dbHelper.doQuery (sqlQuery);
    if (! results.next()) {
    //error
    return -1;
    String studentName = results.getString (1);
    results.close();
    //the lock prevents CMIServlet from reading AU_ID before it's committed
    //sqlQuery = "LOCK TABLES " + GlobalData.AUDataTable + " WRITE;";
    //System.out.println (sqlQuery);
    //dbHelper.executeUpdate (sqlQuery);
    sqlQuery = "Insert Into " + GlobalData.AUDataTable +
    "(Course_ID, Lesson_ID, AU_ID, student_id, student_name, lesson_location, credit," +
    " lesson_status, entry, exit, score_raw, score_max, score_min, total_time," +
    " session_time, lesson_mode, suspend_data, launch_data, Evaluation_ID, Objective_ID)" +
    " Values (" + courseID + ", '" + lessonID + "', '" + auID + "', " + studentID + ", '" + studentName + "'," +
    " 'NA', 'credit'," + " 'not attempted', 'ab-initio', " + "'NA', " + 0 + ", " + 0 + ", " + 0 +
    ", '00:00:00.0', '00:00:00.0', " + " 'normal'" + ", 'NA', " + "'NA', " + 0 + ", " + 0 + ");";
    dbHelper.executeUpdate (sqlQuery);
    return getAUDataID (studentID, courseID, lessonID,auID, dbHelper);
    //sqlQuery = "UNLOCK TABLES;";
    //System.out.println (sqlQuery);
    //dbHelper.executeUpdate (sqlQuery);
    catch (Exception e) {
    e.printStackTrace();
                   getServletContext().log("Error: " + e.getMessage());
    return -1;
    private int getAUDataID (int studentID, int courseID, String lessonID, String auID, JDBCHelper dbHelper)
    throws SQLException
    String sqlQuery = "SELECT AUData_ID, lesson_status, lesson_mode, exit" +
                                  " FROM " + GlobalData.AUDataTable +
                                  " WHERE student_id = " + studentID +
                                  " AND Course_ID = " + courseID +
    " AND Lesson_ID = " + "'" + lessonID + "'" +
    " AND AU_ID = '" + auID + "';";
    ResultSet results = dbHelper.doQuery (sqlQuery);
    if (results.next()) {
    return results.getInt ("AUData_ID");
    return -1;
    private void sendAU (int studentID, int courseID, String lessonID, String auID, int auDataID, boolean normalMode, ServletOutputStream htmlOut, JDBCHelper dbHelper)
    throws IOException, ClassNotFoundException
    Hashtable hash = null;
    synchronized (_courseHash)
    hash = (Hashtable) _courseHash.get (String.valueOf (courseID));       
    if (hash == null) {
    loadCourseData();
    hash = (Hashtable) _courseHash.get (String.valueOf (courseID));
    if (hash == null) {
    throw new IOException ("Corrupt course data (course not found)");
    AU au = (AU) hash.get (auID);
    try {
    if (! normalMode) {
    dbHelper.setReviewMode (auDataID);
    String courseFileName = getFileName (String.valueOf (courseID), dbHelper);
    File file = new File (courseFileName);
    //create absolute path to file so we can resolve relative URLs
    String newFileName = file.getParent() + "\\" + au.getLaunchParams();
                   BufferedReader buf = new BufferedReader (new FileReader (newFileName));
    PrintWriter htmlWriter = new PrintWriter (htmlOut);
                   String temp;
    htmlWriter.write (getAUHtml (au.getLaunchParams()));
    htmlWriter.flush();
    htmlWriter.close();
    catch (Exception e) {
    e.printStackTrace();
                   getServletContext().log("Error: " + e.getMessage());
    private String getAUHtml (String path){
    path = path.replace ('\\','/');
    String response;
    response = "<html>\n" +
                        "<head>\n" +
    "</head>\n" +
    "<body>\n" +
    "<script language=\"JavaScript\">\n" +
    "document.location = \"/cmi/courses/" + path + "\"\n" +
    //"win = window.open ('','displayWindow','menubar=yes,scrollbars=yes,status=yes,width=300,height=300');\n" +
    //"window.onload = \"win.close();\"" +
    "</script>\n" +
    "</body>\n" +
    "</html>\n";
    return response;
    private void sendAvailableAUs (Hashtable hash, int studentID, int courseID, String lessonID, ServletOutputStream out, HttpServletResponse response, JDBCHelper dbHelper)
    StringBuffer buf = new StringBuffer (200);
    Block block = (Block) hash.get (lessonID);
    AU au = null;
    try {
    Vector completedAUs = dbHelper.getCompletedAUs (studentID, courseID, lessonID);
    buf.append ("<html>\n" +
                        "<head>\n" +
    "<title>" + block.getTitle() + " units</title>\n" +
    "<script language=\"JavaScript\">\n" +
    "function go() {\n" +
    " var form = document.goForm;\n" +
    " var index = form.gotoSelect.selectedIndex;\n" +
    " if (index == 0) {\n" +
    " document.location = \"/servlet/CourseServlet?courseID=" + courseID + "\";\n" +
    " }\n" +
    " else if (index == 1) {\n" +
    " top.restart();\n" +
    " }\n" +
    "}\n" +
    "</script>\n" +
    "</head>\n" +
    "<body background=\"/cmi/images/marble.jpg\">\n" +
    "<center><h1><b><u>" + block.getTitle() + "</u></b></h1></center>\n" +
    "<p></p>\n<p></p>\n" +
    "<b>" + block.getTitle() + " contains the following units: </b>\n" +
    "<dl>\n");
    Enumeration enum = block.getChildren();
    while (enum.hasMoreElements()) {
    String temp = (String) enum.nextElement();
    CSFElement element = (CSFElement) hash.get (temp);
    if (element.getType().equals ("au")) {
    au = (AU) element;
    if (completedAUs.contains (au.getID())) {
    buf.append ("<dt><p><img src=\"/cmi/images/node2.gif\"><a href=\"/servlet/LessonServlet?lessonID=" + block.getID() + "&auID=" + au.getID() + "&mode=review\">" + au.getTitle() + " (<i>review</i>) </a></p></dt>\n");
    else {
    buf.append ("<dt><p><img src=\"/cmi/images/node.gif\"><a href=\"" + response.encodeURL ("/servlet/LessonServlet?lessonID=" + block.getID() + "&auID=" + au.getID() + "&mode=normal") + "\">" + au.getTitle() + "</a></p></dt>\n");
    else if (element.getType().equals ("block")) {
    buf.append ("<dt><p><img src=\"/cmi/images/folder.gif\"><a href=\"" + response.encodeURL ("/servlet/LessonServlet?lessonID=" + element.getID() + "&mode=normal") + "\">" + element.getTitle() + "</a></p></dt>\n");
    buf.append ("</dl>\n" +
    "<br><br>\n" +
    "<form name=\"goForm\">\n" +
    "<select name=\"gotoSelect\">\n" +
    " <option value=\"lesson\">Lesson Menu</option>\n" +
    " <option value=\"exit\">Exit LMS</option>\n" +
    "</select>\n" +
    "<input type=\"button\" value=\"Go\" onClick=\"go()\">\n" +
    "</form>\n" +
    "</body>\n" +
    "</html>");
    PrintWriter writer = new PrintWriter (out);
    writer.write (buf.toString());
    writer.flush();
    writer.close();
    catch (Exception e) {
    e.printStackTrace();
                   getServletContext().log("Error: " + e.getMessage());
    private String getFileName (String courseID, JDBCHelper dbHelper)
    throws ClassNotFoundException, SQLException
              ResultSet results = null;
              String fileName = null;
    String sqlQuery = "SELECT CourseFile" +
                                  " FROM Course" +
                                  " WHERE Course_ID = " + Integer.parseInt (courseID) + ";";
    results = dbHelper.doQuery (sqlQuery);
              if (results.next()) {
                   fileName = results.getString (1);
              else {
    //need to do more than this :)
                   System.out.println("crap");
    results.close();
    return fileName;
    private void loadCourseData()
    throws IOException, ClassNotFoundException
    //load serialized course data
    File file = new File (GlobalData.DataFileName);
    if (! file.exists()) {
    //error
    throw new FileNotFoundException (GlobalData.DataFileName + " not found.");
    FileInputStream fis = new FileInputStream (GlobalData.DataFileName);
    ObjectInputStream ois = new ObjectInputStream (fis);
    _courseHash = (Hashtable) ois.readObject();
    ois.close();
    private void sendProfileError (ServletOutputStream out)
    String html = "<html>\n" +
    "<body>\n" +
    "<p>An error has occurred with your profile. Please " +
    "<a href=\"\" onClick=\"top.restart(); return true\">login again</a>" +
    "</body>\n" +
    "</html>\n";
    PrintWriter writer = new PrintWriter (out);
    writer.write (html);
    writer.flush();
    writer.close();
    private Connection _jdbcConnection;
    private Hashtable _courseHash;

    I know that is where my error is, but why and where is
    the script calling it up way?You wrote it right? check out the sendAU() method, there is line
    String newFileName = file.getParent() + "\\" + au.getLaunchParams();

  • ODI not able to detect primary/foreign keys from XML- user lacks privilege or object not found

    Hi Guys,
    Im trying to load an xml file with two entities address and employee as below. The topology reverse engineering everything works fine. Im even able to view the xml data  in ODI,  but when i try to load the data from these two entities joining by the schema primary keys and foreign keys which odi created on reverse engineering process for xml, im getting the below error.  Im able to load data from one entity, error only occurs when i use the join odi creates internally to identify the xml components employee and address
    XML File:
    <?xml version="1.0" encoding="UTF-8" ?>
    <EMP>
    <Empsch>
    <Employee>
    <EmployeeID>12345</EmployeeID>
    <Initials>t</Initials>
    <LastName>john</LastName>
    <FirstName>doe</FirstName>
    </Employee>
    <Address>
    <WorkPhone>12345</WorkPhone>
    <WorkAddress>Test 234</WorkAddress>
    </Address>
    </Empsch>
    </EMP>
    Topology:  jdbc:snps:xml?f=C:/Temp/RR/Empsch.xml&s=Empsch&re=EMP&dod=true&nobu=false
    Error Message:
    -5501 : 42501 : java.sql.SQLException: user lacks privilege or object not found: EMPSCH.EMPSCHPK
    java.sql.SQLException: user lacks privilege or object not found: EMPSCH.EMPSCHPK
        at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
        at org.hsqldb.jdbc.JDBCPreparedStatement.<init>(Unknown Source)
        at org.hsqldb.jdbc.JDBCConnection.prepareStatement(Unknown Source)
        at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.prepareStatement(SnpsXmlConnection.java:1232)
        at sun.reflect.GeneratedMethodAccessor65.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
        at $Proxy2.prepareStatement(Unknown Source)
        at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)
        at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)
        at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)
        at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:81)
        at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)
        at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:70)
        at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
        at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
        at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
        at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
        at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
        at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
        at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
        at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
        at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
        at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
        at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
        at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
        at java.lang.Thread.run(Thread.java:662)
    Caused by: org.hsqldb.HsqlException: user lacks privilege or object not found: EMPSCH.EMPSCHPK
        at org.hsqldb.error.Error.error(Unknown Source)
        at org.hsqldb.ExpressionColumn.checkColumnsResolved(Unknown Source)
        at org.hsqldb.QueryExpression.resolve(Unknown Source)
        at org.hsqldb.ParserDQL.compileCursorSpecification(Unknown Source)
        at org.hsqldb.ParserCommand.compilePart(Unknown Source)
        at org.hsqldb.ParserCommand.compileStatement(Unknown Source)
        at org.hsqldb.Session.compileStatement(Unknown Source)
        at org.hsqldb.StatementManager.compile(Unknown Source)
        at org.hsqldb.Session.execute(Unknown Source)
        ... 27 more
    Please advice
    Thanks
    Revanth

    Thats obvious from the xml file contents you have given here. In this xml file You have four complex type. Two of them are employee and address. However the employee doesnot have any relation with address as you have not added the relationship. Thats why its failing. Its not the fault of ODI.
    Also I would suggest not to use auto generated dtd by ODI as you might face problem in future. For example the address type of XML has 8 attributes and 4 of them are not mandatory. That means each of your xml file may have attributes between 4 to 8.  This is where ODI auto generated DTD fails.
    XML Schema complexType Element
    Thanks
    Bhabani

  • Not able to view the Spaces home page; getting Page not found message

    Hello All,
    I seem to have a problem trying to access the Spaces Welcome page. I get a page not found message trying to access.
    When I look into the logs -
    [2010-07-08T08:32:32.137-04:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Factory Finder is already initialized, hence quitting
    [2010-07-08T08:32:32.152-04:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Cannot locate the document 'oracle/webcenter/webcenterapp/extendingspaces/extending-spaces-properties.xml'.
    [2010-07-08T08:32:32.347-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.spaces.search] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] MDS_QUERY: List size: 0, forAdmin true, isTemplate true, rowsRestricted false, Time Taken : 192
    [2010-07-08T08:32:32.376-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Found the scope spacetemplate/Basic is viewable to authenticated role, setting the flag to true and returning.
    [2010-07-08T08:32:32.402-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Found the scope spacetemplate/CommunityOfInterest is viewable to authenticated role, setting the flag to true and returning.
    [2010-07-08T08:32:32.430-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Found the scope spacetemplate/ProjectSpace is viewable to authenticated role, setting the flag to true and returning.
    [2010-07-08T08:32:32.431-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.spaces] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Templates Application Regions initalized Sucessfully. Templates list has 3 Published Templates list has 3Initalization took 277 ms
    [2010-07-08T08:32:32.550-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.page] Relationship Service is already registered: oracle.webcenter.page, ignoring...
    [2010-07-08T08:32:32.601-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.collab.calendar.personal] Relationship Service is already registered: oracle.webcenter.collab.calendar.personal, ignoring...
    [2010-07-08T08:32:32.611-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.collab.calendar.community] Relationship Service is already registered: oracle.webcenter.collab.calendar.community, ignoring...
    [2010-07-08T08:32:32.616-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.list] Relationship Service is already registered: oracle.webcenter.list, ignoring...
    [2010-07-08T08:32:32.618-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.list.data] Relationship Service is already registered: oracle.webcenter.list.data, ignoring...
    [2010-07-08T08:32:32.666-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.doclib] Relationship Service is already registered: oracle.webcenter.doclib, ignoring...
    [2010-07-08T08:32:32.695-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.collab.announcement] Relationship Service is already registered: oracle.webcenter.collab.announcement, ignoring...
    [2010-07-08T08:32:32.714-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.note] Relationship Service is already registered: oracle.webcenter.note, ignoring...
    [2010-07-08T08:32:32.727-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.relationship.url] Relationship Service is already registered: oracle.webcenter.relationship.url, ignoring...
    [2010-07-08T08:32:32.751-04:00] [WLS_Spaces] [WARNING] [WCS-04202] [oracle.webcenter.relationship.internal.model.ServiceFactory] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] [arg: oracle.webcenter.collab.forum] Relationship Service is already registered: oracle.webcenter.collab.forum, ignoring...
    [2010-07-08T08:32:32.983-04:00] [WLS_Spaces] [WARNING] [] [oracle.webcenter.framework.service.EclipseLinkLogger] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] 2010-07-08 08:32:32.982--ServerSession(7507840)--PersistenceUnitInfo ServiceFrameworkPUnit has transactionType RESOURCE_LOCAL and therefore jtaDataSource will be ignored
    [2010-07-08T08:32:32.986-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.framework.service.EclipseLinkLogger] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] 2010-07-08 08:32:32.986--ServerSession(7507840)--EclipseLink, version: Eclipse Persistence Services - 1.2.0.v20091016-r5565
    [2010-07-08T08:32:32.989-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.framework.service.EclipseLinkLogger] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] 2010-07-08 08:32:32.989--ServerSession(7507840)--webcenter-oracle.webcenter.framework login successful
    [2010-07-08T08:32:33.618-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.adf.mbean.share.connection.ConnectionsMXBeanImpl] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] Registering Connection Runtime MBean
    [2010-07-08T08:32:35.174-04:00] [WLS_Spaces] [WARNING] [ADF_FACES-30163] [oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] The application is running with the new window detect flag off. It is highly recommended that this flag be turned on to ensure proper functioning of your application when new browser windows are launched. In web.xml set the context parameter oracle.adf.view.rich.newWindowDetect.OPTIONS to 'on'.
    [2010-07-08T08:32:38.963-04:00] [WLS_Spaces] [WARNING] [] [oracle.webcenter.collab.forum.internal.model.gateway.ForumGatewayManager] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] oracle.webcenter.collab.forum.ForumException: no connections available for: Discussion Forum
    [2010-07-08T08:32:39.435-04:00] [WLS_Spaces] [WARNING] [] [oracle.webcenter.collab.forum.internal.model.gateway.ForumGatewayManager] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] oracle.webcenter.collab.forum.ForumException: no connections available for: Discussion Forum
    [2010-07-08T08:32:39.951-04:00] [WLS_Spaces] [WARNING] [] [oracle.webcenter.collab.forum.internal.model.gateway.ForumGatewayManager] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2juNFw000jzwkno1Bskt^0000HD,0] [APP: webcenter] oracle.webcenter.collab.forum.ForumException: no connections available for: Discussion Forum
    [2010-07-08T08:33:10.320-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2tI_Fw000jzwkno1Bskt^0000HE,0] [APP: webcenter] Spaces request : #Request URL = http://192.168.0.140:1527/webcenter/spaces #QueryString = null #Encoding = UTF-8 #lang = null
    [2010-07-08T08:33:10.321-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000Iam2tI_Fw000jzwkno1Bskt^0000HE,0] [APP: webcenter] Spaces request : #Request URL = http://192.168.0.140:1527/webcenter/spaces #QueryString = null #Encoding = UTF-8 #lang = null
    [2010-07-08T08:33:10.633-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.jbo.uicli.mom.CpxUtils$Visitor] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000Iam2tI_Fw000jzwkno1Bskt^0000HE,0] [APP: webcenter] jar:file:/wbc/web_logic/user_projects/domains/kbace_domain/servers/WLS_Spaces/tmp/_WL_user/oracle.webcenter.framework.view/9rmhle/WEB-INF/lib/conference-view.jar!/oracle/webcenter/collab/rtc/conference/view/DataBindings.cpx
    [2010-07-08T08:33:10.926-04:00] [WLS_Spaces] [NOTIFICATION] [] [oracle.adf.model.servlet.HttpBindingContext] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000Iam2tI_Fw000jzwkno1Bskt^0000HE,0] [APP: webcenter] Application error handler: oracle.webcenter.webcenterapp.internal.view.error.WCErrorHandlerImpl
    Any help would be appreciated on this.
    Thanks in advance.
    Nachi

    Hi All,
    I am facing this peculiar issue.
    Post installation of webcenter, I can access the Webcenter Spaces homepage.
    I log into webcenter as admin and configure a Mail Connection. I start and stop the Webcenter Spaces deployment. Now I don't see the Webcenter spaces Home page.
    Error on page -
    Page Not Found...
    The page you requested is not found.
    Click here to go to home
    Click here to go to list of accessible pages
    When I check the Logs on the server; I see -
    #SEARCH_CRITERIA
    #     START_TIME: 2010-07-29T05:12:22.740-04:00
    #     END_TIME: 2010-07-29T06:12:22.740-04:00
    #     MESSAGE_TYPES:INCIDENT_ERROR, ERROR, UNKNOWN
    #SELECTED_TARGETS_LIST
    #     /Farm_base_domain/base_domain/WLS_Spaces/webcenter:oracle_webcenter
    [2010-07-29T06:09:27.910-04:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp] [host: kbace-hpbs0201.kbace.com] [nwaddr: 127.0.0.1] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000IcTfOu8Fw000jzwkno1CK78x00003V,0] [APP: webcenter] Factory Finder is already initialized, hence quitting
    [2010-07-29T06:09:27.933-04:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [host: kbace-hpbs0201.kbace.com] [nwaddr: 127.0.0.1] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000IcTfOu8Fw000jzwkno1CK78x00003V,0] [APP: webcenter] Cannot locate the document 'oracle/webcenter/webcenterapp/extendingspaces/extending-spaces-properties.xml'.
    #MESSAGE_COUNT: 2
    Any light in this regard is much appreciated.
    Thanks in Advance.
    Nachi

  • Cisco IPS4255 won't boot (error=Searching / for images to boot. No images found in / Error 15: File not found unable to boot an image)

    Hello,
    I have a Cisco IPS4255 that will not boot an image.  I'm seemingly successfully completing a TFTPDNLD each time, but it keeps rebooting with the cannot find image in \ error.
    Here is a detailed snap shot:
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin-top:0in;
    mso-para-margin-right:0in;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0in;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    #1- I TFTP image to device which automatically starts the output below:
    ENABLING IO-APIC IRQs
    Setting 14 in the phys_id_present_map
    ...changing IO-APIC physical APIC ID to 14 ... ok.
    Setting 13 in the phys_id_present_map
    ...changing IO-APIC physical APIC ID to 13 ... ok.
    ..TIMER: vector=0x31 pin1=2 pin2=0
    testing the IO APIC.......................
    .................................... done.
    Using local APIC timer interrupts.
    calibrating APIC timer ...
    ..... CPU clock speed is 3000.1599 MHz.
    ..... host bus clock speed is 200.0105 MHz.
    cpu: 0, clocks: 2000105, slice: 1000052
    CPU0<T0:2000096,T1:1000032,D:12,S:1000052,C:2000105>
    Waiting on wait_init_idle (map = 0x0)
    All processors have done init_idle
    PCI: PCI BIOS revision 2.10 entry at 0xff648, last bus=4
    PCI: Using configuration type 1
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
    Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
    PCI->APIC IRQ transform: (B0,I29,P0) -> 16
    PCI->APIC IRQ transform: (B0,I29,P1) -> 19
    PCI->APIC IRQ transform: (B0,I29,P3) -> 23
    PCI->APIC IRQ transform: (B0,I31,P0) -> 16
    PCI->APIC IRQ transform: (B0,I31,P1) -> 17
    PCI->APIC IRQ transform: (B0,I31,P1) -> 17
    PCI->APIC IRQ transform: (B2,I1,P0) -> 18
    PCI->APIC IRQ transform: (B3,I1,P0) -> 24
    PCI->APIC IRQ transform: (B3,I2,P0) -> 24
    PCI->APIC IRQ transform: (B3,I2,P1) -> 25
    PCI->APIC IRQ transform: (B3,I3,P0) -> 26
    PCI->APIC IRQ transform: (B3,I3,P1) -> 27
    PCI->APIC IRQ transform: (B4,I2,P0) -> 16
    PCI->APIC IRQ transform: (B4,I3,P0) -> 17
    PCI: Cannot allocate resource region 0 of device 00:00.0
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    allocated 32 pages and 32 bhs reserved for the highmem bounces
    Journalled Block Device driver loaded
    keyboard: controller not found
    pty: 2048 Unix98 ptys configured
    Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SER
    IAL_PCI ISAPNP enabled
    ttyS00 at 0x03f8 (irq = 4) is a 16550A
    ttyS01 at 0x02f8 (irq = 3) is a 16550A
    Real Time Clock Driver v1.10f
    RAMDISK driver initialized: 16 RAM disks of 30720K size 1024 blocksize
    loop: loaded (max 8 devices)
    lpc: version 0.1 (Mar  4 2005)
    Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    hda: TOQHIBA THLCD512MBA, CFA DISK drive
    hdb: QalDisi QDAF@-510, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: attached ide-disk driver.
    hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
    hda: task_no_data_intr: error=0x04 { DriveStatusError }
    hda: 484848 sectors (248 MB) w/2KiB Cache, CHS=481/16/63
    hdb: attached ide-disk driver.
    hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: task_no_data_intr: error=0x04 { DriveStatusError }
    hdb: 484848 sectors (248 MB) w/1KiB Cache, CHS=481/16/63
    Partition check:
    hda: hda1 hda2 hda3 hda4
    hdb: hdb1 hdb2 hdb3 hdb4
    ide: late registration of driver.
    SCSI subsystem driver Revision: 1.00
    i2c-core.o: i2c core module version 2.8.7 (20040611)
    i2c-dev.o: i2c /dev entries driver module version 2.8.7 (20040611)
    i2c-proc.o version 2.8.7 (20040611)
    i2c-i801 version 2.8.7 (20040611)
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 32768 buckets, 256Kbytes
    TCP: Hash tables configured (established 262144 bind 65536)
    Linux IP multicast router 0.06 plus PIM-SM
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    RAMDISK: Compressed image found at block 0
    Freeing initrd memory: 26522k freed
    VFS: Mounted root (ext2 filesystem) readonly.
    Freeing unused kernel memory: 136k freed
    init started:  EXT2-fs warning: checktime reached, running e2fsck is recommended
    BusyBox v1.00-rc1 (2005.03.04-09:39+0000) multi-call binary
    init started:  BusyBox v1.00-rc1 (2005.03.04-09:39+0000) multi-call binary
    Starting pid 10, console /dev/ttyS0: '/etc/init.d/rcS'
    Recovery version 1.13
    Started on Sun Mar  7 05:17:41 UTC 2010
    Full system recovery
    A
    Please press Enter to activate this console.
    tarting pid 86, console /dev/ttyS0: '/bin/sh'
    BusyBox v1.00-rc1 (2005.03.04-09:39+0000) Built-in shell (ash)
    Enter 'help' for a list of built-in commands.
    #2- I’m not a unix/linux person so I don’t have the knowledge to fix the “hdx” errors above, so after reboot it goes to “rommon”
    Booting system, please wait...
    CISCO SYSTEMS
    Embedded BIOS Version 1.0(10)0 03/25/05 22:42:05.25
    Low Memory: 631 KB
    High Memory: 3968 MB
    PCI Device Table.
    Bus Dev Func VendID DevID Class              Irq
    00  00  00   8086   2578  Host Bridge
    00  01  00   8086   2579  PCI-to-PCI Bridge
    00  03  00   8086   257B  PCI-to-PCI Bridge
    00  1C  00   8086   25AE  PCI-to-PCI Bridge
    00  1D  00   8086   25A9  Serial Bus         11
    00  1D  01   8086   25AA  Serial Bus         10
    00  1D  04   8086   25AB  System
    00  1D  05   8086   25AC  IRQ Controller
    00  1D  07   8086   25AD  Serial Bus         9
    00  1E  00   8086   244E  PCI-to-PCI Bridge
    00  1F  00   8086   25A1  ISA Bridge
    00  1F  02   8086   25A3  IDE Controller     11
    00  1F  03   8086   25A4  Serial Bus         5
    00  1F  05   8086   25A6  Audio              5
    02  01  00   8086   1075  Ethernet           11
    03  01  00   177D   0003  Encrypt/Decrypt    9
    03  02  00   8086   1079  Ethernet           9
    03  02  01   8086   1079  Ethernet           9
    03  03  00   8086   1079  Ethernet           9
    03  03  01   8086   1079  Ethernet           9
    04  02  00   8086   1209  Ethernet           11
    04  03  00   8086   1209  Ethernet           5
    Evaluating BIOS Options ...
    Launch BIOS Extension to setup ROMMON
    Cisco Systems ROMMON Version (1.0(10)0) #0: Fri Mar 25 23:02:10 PST 2005
    Platform IPS-4255-K9
    Management0/0
    Link is UP
    MAC Address: 000f.f775.7e24
    Use ? for help.
    rommon #0>
    #3- If the TFTP is rerun the entire cycle starts again.

    The IPS 4255 sensor appliance has only a single 512 MB internal CompactFlash module for storage by-default, so this part of the output you posted is interesting:
    hda: TOQHIBA THLCD512MBA, CFA DISK drive
    hdb: QalDisi QDAF@-510, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: attached ide-disk driver.
    hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
    hda: task_no_data_intr: error=0x04 { DriveStatusError }
    hda: 484848 sectors (248 MB) w/2KiB Cache, CHS=481/16/63
    hdb: attached ide-disk driver.
    hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
    hdb: task_no_data_intr: error=0x04 { DriveStatusError }
    hdb: 484848 sectors (248 MB) w/1KiB Cache, CHS=481/16/63
    As it appears that two (2) 256 MB ("248 MB") storage devices are being detected (despite the model of the first even containing "512MB" in its name).
    I'd recommend double-checking that there is nothing installed in the "External compact flash device" slot located on the back of the appliance. See here for reference: http://www.cisco.com/en/US/docs/security/ips/7.0/installation/guide/hw_installing_4240_4255.html#wp2726
    If there is a CompactFlash module installed there, eject and remove it, then power-cycle the appliance and attempt the re-image ("recovery") process once more. If the boot output still contains the same errors for hda and hdb, then it is probably a failing/failed CompactFlash module, so an RMA will likely be necessary to resolve.

  • SAP Java Crypto Toolkit was not found

    Hi,
    I m trying to install Netweaver 7.0 BI and portal with SR3 package. Installation is Cluster installation on windows 2008 and sql 2008 platform. When I came to Centarl instance installtion. On Start Java Phase I had the error. I put the error below. I check the notes Note 1071472 - FileSystem SecureStore connection issues, Note 914818 - JSPM: Could not detect database, Note 1154133 - JSPM: SAP Java Crypto Toolkit was not found.
    Thank you For your Help.
    Bootstrap MODE:
    <INSTANCE GLOBALS>
    determined by parameter [ID0276347].
    Exception occurred:
    com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
         at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476)
         at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)
         at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:971)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    ==[ Caused by: ]==----
    com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:115)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
         at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
         at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
         at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
         at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:74)
         at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:473)
         at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)
         at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:971)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:112)
         ... 13 more
    Caused by: com.sap.security.core.server.secstorefs.NoEncryptionException: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm.
         at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1975)
         at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
         at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
         ... 15 more
    Caused by: javax.crypto.NoSuchPaddingException: Padding 'PKCS5Padding' not implemented.
         at iaik.security.cipher.w.engineSetPadding(Unknown Source)
         at iaik.security.cipher.PbeWithSHAAnd3_KeyTripleDES_CBC.<init>(Unknown Source)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
         at java.lang.Class.newInstance0(Class.java:308)
         at java.lang.Class.newInstance(Class.java:261)
         at javax.crypto.SunJCE_b.a(DashoA12275)
         at javax.crypto.SunJCE_b.a(DashoA12275)
         at javax.crypto.Cipher.a(DashoA12275)
         at javax.crypto.Cipher.getInstance(DashoA12275)
         at com.sap.security.core.server.secstorefs.Crypt.<init>(Crypt.java:220)
         at com.sap.security.core.server.secstorefs.SecStoreFS.<init>(SecStoreFS.java:1346)
         at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:798)
         ... 17 more
    [Bootstrap module]> Problem occurred while performing synchronization.

    Hi
    > > Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..
    >      at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
    >      at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
    >      at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
    >      at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
    >      at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:112)
    It looks like the JCE file which you have downloaded is not the correct one. As you can see some jar files are missing. Check JCE files.
    Check SAP Note 1240081 - "Java Cryptography Extension Jurisdiction Policy" files
    Thanks
    Sunny

Maybe you are looking for

  • ChaRM Setup in Sol Man 4.0

    Hi, I am looking for a step-by-step document to configure Change Request Management in Solution Manager 4.0 Please be kind enough to send it across.  Many thanks in advance, Abdul R Shaik

  • IDS in a Virtualized Environment (vmware)

    Can anyone elaborate on an IDS solution for a virtualized environment? I have blade servers running ESX/ESXi - heavily virtualized environment. Im using blade switches as chassis I/O - no pass throughs. The requirement is to run an IDS service such t

  • Download PO approval app Issue

    Hi All, While downloading the PO approval app from /UI5/UI5_REPOSITORY_LOAD i am not able to download index,main and maindetails view and the resource folder is also empty. is there any another way to download or help out to replace this file. Thanks

  • 10.6 - 10.6.4 Upgrade Problem - "partially downloaded" etc

    Hello I just updated to Snow Leopard 6.4 with the disk that came with my Mac Mini. I'd been using the computer for many months before updating. It seemed to go smoothly. In order to install the new Xcode/SDK I need to upgrade so I ran Software Update

  • Working with the CSS in JDeveloper 11g

    Hi All, I am working on the CSS of the JSF and the ADF Components in JDeveloper11g. When adding the components it is generating the css for those component dynamically . When seeing the CSS file Iam unable to understand for which component this parti