Kinston DDR ram not supported?

previously using KT2-Ultra, now upgrade to K7N2-Delta.
My Kingston 512MB DDR400 not supported?
Is it any way to make it run... er... smoothly?
specs:
AMD XP 2500+ Processor
K7N2-Delta
Kingston 512MB DDR400
MSI Geforce4 MX 440 64MB
MSI Combo drive
Sony FDD
Maxtor 40GB 7200RPM HDD
Kingston Ram Part number:
KVR400X64C3A/512

sorry, looks like i bump into wrong portion!
please move this to the right position,
thank you very much...
BTW, will adding more voltage to ram burn it? I just burnt a Kingston 512MB DDR400 at ASUStek board!!!
The intel 865 chipset board does not support Kingston 512MB DDR400, it state in the manual and I didn't read it... No warranty for both RAM and M/B. Oouucchhh~

Similar Messages

8GB DDR ram not showing up

i just purchased 2x 2GB cards and 2x4GB cards and only the 2GB cards are showing. i moved them to different slots and they still show up empty. and solutions?

I realise this thread is finished but I just had a RAM problem and googling it brought me here. I Just thought I'd post my solution in case anyone else should come across this. had 4 x 1gb sticks of crucial ram that wasn't showing up. after almost giving up I noticed that 2 sticks I had paired together were different batch numbers (serial numbers). Swapped them to match each other and presto..all good. So yea both crucial and both 1gb it just liked to be beside the pair it was originally made with. Quite romantic really

Imac purchased 6/07, when trying to upgrade says model not supported? have plenty of ram and free space? so what is not compatible in the model i have?

i purchased my imac 6/07 ... model 6,1 it has 4 gb ram and plenty of free space, also connected to time machine for backup. currently have latest lion os 10.7.4.
when i went to upgrade i get a model not supported message? what spec or device integral to my model is holding this back? can i get around this or am i just at a brick wall? would like to upgrade if possible? have a 2.33 ghz intel core duo processor, 4 GB 667 Mhz DDR2 SDRAM
anyone know what is going on with apple and this model, wife has last years mac mini and it's upgrade went off without a hitch
thanks !

Apple has tightened its requirements for this OS upgrade, and some older Macs— even ones that qualified for Lion — won't make the cut for Mountain Lion.
The general system requirements are straightforward:
OS X v10.6.8 or later
2GB of memory
8GB of available space
Apple also lists which models support Mountain Lion:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
From what i've read elsewhere, your older model of iMac has a CPU and logic board that partially runs in 32 bit mode at times. Mountain Lion requires that they run Exclusively in pure 64 bit mode. Yours cannot be made to do that.
Hope this helps

Problem in installing a new DDR RAM on my board MSI 915GLM-V

Hi,
I have a System whose configuration is as follows
Mainboard:MSI 915GLM-V
Processor: Intel P4 3.06Mhz(533 FSB)
Bios :Award V3.3
Memory: 256MB(64*4) DDR RAM in one DIMM slot(333 Mhz).
I wanted to increase the memory to 512 MB and hence bought a new256 MB(333 MHZ and 32 *8) card. But whenever I insert my card, My system never boots up. I am unable to even enter the bios.
I even replaced my old DDR RAM with this new one. But still my system never comes up. Is there any reason that my system is not recognising the new memory. Or is it that 32*8 not supported by this motherboard.
Thanks in advance.
Regards,
Ravitej

Sorry, your DDR RAM is not supported. You need 64*4 for 256MB, or 64*8 for 512MB.

Fastest Compatable DDR RAM For 648 MAX?

I've been reading about all these problems people have been having concerning RAM/motherboard combinations, and have concluded that my RAM is what is causing my problems (XP/2000 installation difficulties, unrecognizable Gainward GF4 Ti4200 card, boot up problems). Right now, I have one Kingston Hyper X 512MB DDR434 RAM (which is going out the door soon) installed on my 648 MAX.
I originally thought the video card problem was BIOS related because the only thing recommended by XP was to update the BIOS (said motherboard does not support your video card's features; try updating your BIOS). I tried that through LiveUpdate, and it messed up somehow during the flash, so I tried to restore the original BIOS, but the system was very unstable after that. I'm about to send my motherboard back for an exchange. I just found out by reading some posts here that other people have been having the same problem with a similar RAM/video card setup.
Also, I'm having extreme difficulty installing Win2000. It installed the first time on a test HDD, but on my new one (WD 80GB 7200RPM ATA100), it wouldn't go in at all. ;( It went up to the final file copying part (after entering the serial number), and crashed. It kept doing that, so I gave up and moved on to XP. XP went in fine the first time, but it wouldn't reinstall after that, even with a reformatted drive. Other people are having similar problems, and said that once they swapped out their RAM, their problems were gone.
I'm just looking for the fastest compatible 512MB DDR RAM available for the 648. Thanks.

Heh, funny thing, I was messing around with some BIOS settings, and somehow got my computer to work this afternoon! 8o Reinstalled everything, and was having a good ol time! :D
Then, and even funnier thing happened. I went out this evening, and when I came back, the computer wouldn't work anymore! X( This thing is driving me nuts. I'm definitely gonna pick up either the Corsair or Winbond memory ASAP. Thanks for the replys everyone!
BTW, I've had the hard drive by itself with the jumperless setting from the beginning. Also, it always wants to be the primary drive, even when it's set to slave and attached at the slave connector on the IDE cable. ?( I know that isn't a problem right now cause I just have it by itself on the cable.

DDR RAM 2GB in DC7100

Hi!
May I install to DC7100 SFF (PE218ET) BIOS 786C1 v.01.05 DDR RAM 2*2G Micron PC3200R-30331-z?
Maybe I need to upgrade BIOS?

Hi:
The maximum amount of memory you can install in each memory slot is limited to 1 GB.
A BIOS update won't change that.
You can install 2 x 2 GB in a dc7600 even though the specs say it is not supported, but you can't on a dc7100.

Can't open the application "Adobe Illustrator CS6.app" because it is not supported...

UPDATE - Ahhh haaaa! If I log in with the guest account Illustrator works fine! WTF!? Oh well, at least I have a direction to be working towards, thanks for all the suggestions and assistance Adobe Community!
That was sarcasm by the way...
UPDATE - Just installed the latest Illustrator update from Adobe - still not loading. Tried reseting the iMac's PRAM, no luck.
UPDATE - I've just reinstalled the whole CS6 Suite, and the only things that have changed are that I now have a little white no entry sign over Illustrator (it still won't load) and I also have 1.5GB of application updates to do
I don't have any direct evidence but I'm guessing this is a Mavericks incompatibility judging by the other issues people are having with Illustrator. Any suggestions are welcome!
I've been using CS6 on my iMac for the past year (3.2GHz Intel Core i5, 32GB ram). Everything running fine, no problems.
Then I get the popup from Apple saying to upgrade to Mavericks, so I did. After updating my Java version, for the next two weeks everything carried on running fine. Until just now.
I finished working on an Illustrator file, saved it and then exited, only to remember I needed to make one more small change. So I clicked on the AI icon and got this error message;
'You can’t open the application “Adobe Illustrator CS6.app” because it is not supported on this type of Mac.' Eh???
I tried doing a reboot thinking that maybe something had just gone wonkey and needed resetting. Still no luck. So I reinstalled Java again. Nope. Then I tried every other CS6 app and they all ran fine.
Does anyone know what could cause Illustrator CS6 to be working fine for weeks and then suddenly become an unsupported app? These things always happen with you're right up against a deadline! I NEED ILLUSTRATOR WORKING NOW! HEEEEEELLLLLLLPPPP!
James

I had the same issue and resolved it
I first remove the prefs folder and the plist files for illustrator in ~/Libary
next I logged off,
then I uninstalled illustrator using the adobe uninstaller(http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html)
Next I reinstall illstrator
after that it worked for me.

Cisco OS 2000.2.7 does not support MCS 7825I1 ?

Hi Pros,
I have a new installation coming up of CCM 4.1.3 & Unity 4.0.5
Seems Cisco has sent wrong set of OS Cds for CCM. The Server is a IBM make (MCS 7825I1) with Prescott 3.4 CPU & 2GB RAM alongwith 2 * SATA 80GB HDD.
When I insert Hardware Detection CD for 2000.2.7 it says "This OS version does not support the detected server. Remove the disk and press any key to reboot.
My BoM says:
CM4.1-K9-7825= SW CallMgr 4.1, MCS-7825 2
MCS-7825-I1-IPC1 HW Only MCS-7825-I1 with 2GB RAM
and SATA RAID
2
Can I install like this - Run IBM ServeRaid, Prep server, Insert Win2k cd, then after install run OS Upgrade 2000.2.7
Will this work?
Regards,
Pratik

i am not sure why the CPU speed should matter.......
I don't know what to say, if you have the "a" hardware detection disk, this should work. I have never had a problem once i had the right media so i will step aside and wait to see if someone else can help.
Steve

K7N2 DELTA-ILSR AND DDR-RAM

I got K7N2 Delta-ILSR, the last bios version, and
2x256 twinmos pc3200 ram. The 50% of the times the computer startes without problems, but the other 50% it gets hang up when I start the computer and the "d-Leds" indicate:" the memory module is damaged or not installed properly".
I know that the ram-modules works, but not with this Motherboard.
I need to get new ram-modules.
Somebody have the K7N2 DELTA-ILSR, with ddr-ram that works ??? (not K7N2G- IL and ILSR)
[size=15]You can list this here, it will help a lot of people! [/SIZE]

If you'll look at the start of the forum you'll see an article "good memory choices" start there.If you don't want to spend the bucks buying new mem read this http://www.msi.com.tw/program/e_service/forum/index.php?threadid=20221&boardid=14

Mid 2010 Macbook Pro to a Samsung Tv. (Mode not supported)

Hi, I have a macbook pro mid 2010, when connected to an external tv, i get the mirroring option, however when i uncheck the mirroring option (cause i need 2 desktops screen instead of one), my external monitor shows " Mode not supported ". I have a samsung LCD TV. It works perfectly with mirroring option, but I don't want a mirroring option..... Can anyone help?

I have a MacBook Pro 15 inch early 2011.
The new features available in OS X Yosemite like Continuity, Handoff,etc are not supported in this model.
I did upgrade RAM to avoid any possible slowdown.
I found replacing the HD with SSD is too expensive for a 4 years old model.
Replacing the CPU/GPU is not for amateurs.
If you think that rebuilding a Mac part by part is a viable option, please go ahead and rebuild it.
Best.

Monitor says VIDEO MODE NOT SUPPORTED after changing display settings

HELP! I am about to have a nervous breakdown with my mac mini! I hooked up the mac to my Philips LCD via DVI. No problem at all. But because the screen is only 15" I wanted to play around with the display settings a bit. So I changed the resolution from it's original 1204x768 to the one higher (not sure of numbers) and to my HORROR, I now can't get any picture at all - it says "VIDEO MODE NOT SUPPORTED". I have tried everything I can think of. I have rest the P-RAM, I have unplugged all cables, plugged the back in again, I bought the mac into work and hooked it up to my monitor and changed the resolution back to 1024x768 which is what it was on originally and that STILL didn't work. I can see the Apple logo and then it goes black and comes up with the error message. HELP! What am I doing wrong - I can't believe one click of a mouse button has rendered my display useless!!!

Welcome to Apple Discussions!
Try booting the mini without the display connected, and then, once the system is running, connect the display. This will often force the system to default to a low resolution, and then correctly detect the display when it is connected.
If that doesn't help, with the display connected, boot into safe mode (hold the shift key down when starting up) and once the system is running, change the resolution to 1024x768, and ensure the correct refresh rate is selected. Rebooting normally ought then to give you a good display.
If all else fails, boot into safe mode with the display connected, and then in the Finder's file menu, use the 'find' option to search for 'windowserver' (no quotes). You should get 2 or 3 results, including one with a string of alphanumeric characters. Move all of them to the trash and restart normally.

YOU CAN'T OPEN THE APPLICATION VIRTUAL DJ LE BECAUSE IT IS NOT SUPPORTED ON THIS ARCHITECTURE .. What can I do to Fix this??

I have a Mac PowerPC G5 and i just installed the Version 10.5.4 to be able to install Virtual DjLE , and after I installed it, i try to open it and there was an error msg saying : " you can't open the application virtual dj le because it is not supported on this architecture"
What can I do to resolve this? ... Can someone help me with this?? ..
Thank you for your help!

Hi, we're out of luck...
MAC SYSTEM REQUIREMENTS
MINIMUM system requirements:
Intel® processor
Mac OS X v10.5.x
1024x768 resolution
CoreAudio compatible soundcard
1024MB RAM
50MB free on the hard drive
RECOMENDED system requirements:
Intel® processor
Mac OS X v10.6.x
1440x900 resolution
Multi-channel CoreAudio compatible soundcard
2048MB (2Gb) RAM
200MB free on the hard drive
Additional requirements for Video mixing:
ATI™ or NVIDIA® video chipset w/256MB of Dedicated DDR3 RAM
Video must support dual-screen output
Supported Operating System and Processor Platforms:
MINIMUM: Mac OS X v10.5 Leapord on Intel processor platform
RECOMMENDED: Mac OS X v10.6.x Snow Leapord on Intel processor platform
Apple® Mac OS X 10.4.x Tiger or older are not supported
Motorola® (PowerBook® G4) processor platform or older are not supported
http://www.virtualdj.com/products/virtualdj/index.html
Might see if the still have version 6.x here...
http://www.virtualdj.com/download/updates.html

How to solve "this type of file is not supported, or the required codec is not installed"?

Hi all,
I've just started using a new computer with WIndows 8.1 within the last week and have loaded my Adobe Premiere Elements 11.0 software into it.
In trying to view and edit a video I created on my old computer, I got "Media Pending" and "Media Offline" notices as soon as I began. The source files are located on an external drive with a permanent letter designation. I began the process of reconnecting my Project Assets files with the source files this morning, but have now encountered a new roadblock. Each time I try, I get the message "this type of file is not supported, or the required codec is not installed." It offers no information or options other than to click "OK," which is not very helpful.
All the source files are located in one folder on my external drive. I have been able to reconnect the JPEGs and the mp3 source files but not the AVI video files.
Here are three screenshots. The first is the "Media Offline" message, the second is the message I receive when I try to reconnect my Project Assets to the source files and the third is a screenshot of the codecs installed on the new computer.
Here is my new computer information:
Model: Del Inspiron 3847
Intel Core i5-4460
CPU @ 3.20 GHz 3.20 GHz
RAM 8 GB
System type: 64-bit, x64-based processor
I hope someone can guide me. What do I need to do to solve this problem?
Thank you.
Message was edited by: Janie Christensen Ficara

StreetSongs
Thank your for the information supplied.
But, what are the properties of this .avi file that you seek?
Video Compression
Audio Compression
Frame Size
Frame Rate
Interlaced or Progressive
Pixel Aspect Ratio
Right now of prime interest is the video compression that is being wrapped by that AVI wrapper/container.
AVCHD.avi
MotionJPEG.avi
XviD.avi
DviX.avi
other
There are instances were a particular video compression or a particular container/wrapper format is each supported by Premiere Elements, but
not a combo of those particular two. But, in this instance, I suspect this to be a MotionJPEG video codec issue, but your details will
point us to the actual situation, and we will plan troubleshooting strategy from there.
ATR

RRoCE v2.0 mode was requested, but it is not supported.

Customer is using N5k, connecting W2012 R2 host, as well as a W2012 R2 host acting as a SMB3 fileserver.
They use RDMA over Converged Ethernet (RoCE), and receive the following error message
SingleFunc_32_0_0: RRoCE v2.0 mode was requested, but it is not supported. The NIC starts in RRoCE v1.5 mode.
NOTE: If your environment contains mix of different NIC types, you need to make sure that the whole environment is configured to use the same RoCE mode,
otherwise the traffic between the different NICs does not work.
interface Ethernet1/13
priority-flow-control mode on
flowcontrol send off
flowcontrol receive off
end
Global QoS Config
class-map type qos match-any class-rdma
match cos 3
class-map type queuing class-rdma
match qos-group 4
policy-map type qos rdma-policy
class class-rdma
    set qos-group 4
class class-default
policy-map type queuing rdma-queuing-policy
class type queuing class-rdma
    bandwidth percent 60
class type queuing class-default
    bandwidth percent 40
class-map type network-qos class-rdma
match qos-group 4
policy-map type network-qos rdma-network-policy
class type network-qos class-rdma
    pause no-drop
class type network-qos class-default
    multicast-optimize
system qos
service-policy type network-qos rdma-network-policy
nterface Ethernet1/13
service-policy type qos input rdma-policy
service-policy type queuing input rdma-queuing-policy
service-policy type queuing output rdma-queuing-policy
The end to end link is not working ? Any hints what could be wrong ?

http://www.mozilla.com/en-US/firefox/4.0/system-requirements/
Mac
Operating Systems
* Mac OS X 10.5
* Mac OS X 10.6
Recommended Hardware
* Macintosh computer with an Intel x86 processor
* 512 MB of RAM
* 200 MB hard drive space
For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/
Or revert to Firefox 3.6.16, which is available here: <br />
http://www.mozilla.com/en-US/firefox/all-older.html

Installed graphics card does not support the opengl features recommended

I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
and http://www.apple.com/finalcutstudio/download/):
* A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
* 1GB of RAM
* An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
* A display with 1024-by-768 resolution or higher
* Mac OS X v10.4.11 or later
* QuickTime 7.3 or later
* DVD drive for installation
I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
Thanks in advance for any helpful advice you may have.

The minimum would probably be an nVidia Fx5200 or an ATI 9600...
Patrick

Kinston DDR ram not supported?

Similar Messages

Maybe you are looking for