KKF6N : Problem in Recording

Hello Experts
I want to do recording of tcode KKF6n but at the time of recording inputfield Material & Plant is coming in disabled mode.
What can i do for it.
Can u suggest any solution to me.
Thanks & Regards
Priyanka

Do recording for Tcode KKF6.
Or do data entry in tcode KKF6.
Then go to KKF6N, right click on the plant and then select create option

Similar Messages

Battery problem while recording videos.

I got my ipod touch 5 1 month ago. I got a problem while recording videos. The battery was around 40 percent, but after I recorded a video for about 1-2 minutes. The 20% was popup, then it turned off automatically. While I turn on it, the battery will be about 30 percent. It happened several times. Is this normal?
Does anyone have the same problem?
Thanks!

Hi,
Please refer the below link...
http://www.sapfans.com/forums/viewtopic.php?f=27&t=20842
Kuber

Stereo Audio Record problem (While recording video as well)

Hi,
I just just bought Sony Xperia C3 dual yesterday. I'm having problem with audio recording. I installed the Sony audio recorder from Google play store but while recording in stereo mode with it the gain suddenly drops after 1/2 second(s). Same problem while recording a video with stock camera app as well, video quality is fine but the audio with it is,just worst. Tried third party app like regorge pro but faced the same problem. Tried disabling the AGC with it, but no good. Recording in mono mode just works fine and I get clear record.
Any solution?
Thanks.

@uliwooly This one i recorded today morning. The audio starts good & clear at the begining but just after one second it drops & then you can hear the bus engine sounds like waterfall. Here is the youtube link https://www.youtube.com/watch?v=5H1jNxyYMlw Here's another video uploaded by a review site with the same problem https://www.youtube.com/watch?v=z3vKwydfN6U & more from youtube https://www.youtube.com/watch?v=-GLLj2ommP4 then i used a third party audio recorder with mic switch option https://www.youtube.com/watch?v=D6d4uAEZFRE as usual with the rear mic the gain suddenly drops after second & you can hear some weird sounds like a "movie bomb" sound at 00:04, "rattle snake" sound at 00:05 & 00:12 & with the front mic starts at 00:17 you can hear the difference. It's mono but so clear & sharp. Finally, as i dont have the mic swith option while recording video, all videos i record will have the same problem. This is definitely not the typical "sony" thing to carry on.

I'm having a problem while recording a video

'm having a problem while recording a video
When the memory card and the highest quality ..
Stop and is working
I recorded video works normally on the memory card.

Nokia C5-00 5MP

How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.

You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

Re: Problem in recording VF02 billing transaction

Hi all,
 I am having a problem in recording the VFO2 for the processing of Despatch details in third screen Header Texts.
How to write the BDC code for uploading data for this TCODE VF02.particularly with header texts.....
 Thanks in Advance
 Ravi

Hi
Check this function module : GN_INVOICE_CREATE
CALL FUNCTION 'GN_INVOICE_CREATE'
 EXPORTING
 DELIVERY_DATE = DELIVERY_DATE
 INVOICE_DATE = INVOICE_DATE
 INVOICE_TYPE = 'ZFX'
 PRICING_DATE = PRICING_DATE
 VBSK_I = X_VBSK
 WITH_POSTING = 'D'
 ID_NO_ENQUEUE = 'X'
 TABLES
 XKOMFK = IT_KOMFK
 XKOMFKGN = IT_KOMFKGN
 XKOMFKKO = IT_KOMFKKO
 XKOMFKTX = IT_KOMFKTX
 XKOMV = IT_KOMV
 XTHEAD = IT_HEAD
 XVBFS = IT_VBFS
 XVBPA = IT_VBPA
 XVBRK = IT_VBRK
 XVBRP = IT_VBRP
 XVBSS = IT_VBSS
 SUCCESS_DOC_OUT = IT_SUCCESS.
Or you can use BAPI :- BAPI_BILLINGDOC_CREATEMULTIPLE
CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
EXPORTING
CREATORDATAIN = GS_CREATORDATAIN
TESTRUN = co_x
POSTING = co_x
TABLES
BILLINGDATAIN = GT_BILLINGDATAIN
CONDITIONDATAIN = GT_CONDITIONDATAIN
CCARDDATAIN =
TEXTDATAIN =
ERRORS =
RETURN = GT_RETURN
SUCCESS = GT_SUCCESS.
regards,
Hiren Patel
Don't forget to Reward points

Realtek HD audio problem when recording

Hello guys;
Been trying to do some recording for the first time since the OC was rebuilt. New specs as below.
(By the way, I couldn't get any sound at all until I reinstalled the UAA bus driver..., so it's thanks to this forum that I got sound in the first place!)
Anyway, the problem I now have is that basically the record level is way too high. I use Steinberg Clean 5.0 and was finding that although I could change the levels in the software, whatever level I recorded at I was suffering extreme amounts of clipping/distortion. (I should mention that the input is from a good quality hifi, I used it for many years for recording with my previous PC incarnation using my KT6 delta rig).
After much trial and error, I found that the only way to stop this is to have the recording sound level in volume set to - well it isn't numbered - it would be about 10%. I also discovered that although master recording level is adjustable the others - CD, mic, line, mix are greyed out.
The master level is really difficult to set (as I write I just discovered it's still distorting and I'll have to edged it down another couple of % towards zero), so I really want to change the "line" record level, but as I said it's greyed out.
In Realtek sound manager it's similar, in the record section there's an overall level control but no individual adjustments for record, only playback.
Incidentally playback works just fine!
Realtek drivers are latest 5.10.0.5928 downloaded yesterday from Realtek.
Anyone got any ideas please?
Andrew
Antec Sonata 2 case with 450w Smartpower PSU
+5V, 30A; +3.3V, 32A; +12V, 15A + 17A; -12V, 0.3A; -5V, 2A
MSI P43NEO-F
IntelE7400
4GB OCZ RAM
MSI ATI HD4650 1GB
120, 160, 500GB HDDs
2 optical drives
Etc
Windows XP Home SP3

Quote from: hu479as on 15-September-09, 04:10:19
I think the audio out must be fine as it works just fine for general listening to CDs, LPs (!!), whatever played from the hifi. No distortion even with volume level (in "volume control") set at 100% It's only the record level that's weird :-)
I'll try the headfone thing later, just trying to record something now!
Sorry, I'm not sure if this will help, as I haven't used Realtek HD audio for some time (always used add-in cards). But in my experience, most sound controllers have an option in mixer to select the recording source (e.g. Mic In, Line In, S/PDIF-In, Wave, CD, etc). In particular, many offer a recording source option for "What you hear" or "Stereo Mix". Essentially, this would combine and capture the audio from every available source, rather than from just a single source. I'm guessing it's a long shot but maybe you could change your recording source to this "mix" type (hopefully, something similar is available). To reduce noise you'll probably want to MUTE other sources (Wave, MIDI, CD, etc.), though you could leave them enabled as well (try to avoid things that would inject noise).
I'm only suggesting this approach because you mention that the playback from your hifi is completely fine. Only recording from line-in is distorted. So perhaps, you can work around the problem by recording the mixed playback. It shouldn't make any sense for this to be happening but maybe you'll be lucky?? My (worst-case) thought is that maybe your realtek HD's ADC is damaged and therefore playback is flawless but recording is flawed...
Another thought I had is mixer settings are often stored within an ini file. If you or someone else could identify the file(s), then you should be able to view, and in turn, modify the numeric playback and recording levels. That should aide you in adjusting the levels more precisely, rather than guessing levels via the obscure gui sliders.
It may turn out that none of my ideas are helpful, but I wish you good luck all the same.

Problem with recording device

Try to use Echo/Sound test service, as well as a couple friends on the list and get the following message "Problem with recording device". I have also searched in the community, but found many issues releated, but no solutions that fit the problem. Headset: Turtle Beach XP SevenSkype Version: 6.22.81.105Operating System: Windows 7 Ultimate Service Pack 1; 64 - bit Tested in sound recorder, and records my voice, and able to playback and hear my horrible singing. I did find a rather odd way to resolve the issue temporarily. I also use hangouts from time to time, and when I start a video call, it will ring, and send out, and I can then call out using skype to a friend/sound test and it will work fine for the rest of the call. Able to talk, and do whatever. Unfortunatley, with the listed method above I have to repeat the process everytime I want to make a call, or accept someones call. Rather... Annoying. Any solution to this, or what can be causing this issue?

I suggest you download and install the latest generic Realtek audio drivers as they should be compatible with the computer model you listed in a previous post. I run a similar model to that one and have no issues with it. Skype is rather resource intensive on that netbook when participating in video calls due to the limitations of the processor and onboard video chipset. The latest generic Realtek audio drivers (Select "High Definition Audio Codecs" - 32 bit Windows 7)http://www.realtek.com/downloads/okay, i have pretty much given up trying to use Skype on this netbook but i came back to report the known data just in case anyone else might find it useful. to begin with 1) let's get this upfront. i am ignorant, ill-informed, tech-illerate and stupid. i stipulate to this going in. i've NO idea what the hell i'm doing. 2) hardware = ASUS eeePC1005HA, Win7Starter32, 1G DDR2, Intel Atom280, 250GHDD 3) per the above suggestion i went to the RealTek site and looked for the driver, but first 4) i had SlimDriver look around for me and it said there was a newer driver (i think dated 2011) which i had it download & install 5) so that didn't seem to make the slightest difference in Skype performance (i.e. none) so 6)as in (3) above i went to http://152.104.125.41/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false and it offered me 2 choices of sites from which to download Version R2.78 for 32bit Win7 so i picked one at random and it downloaded 2 files, 1 a .exe and the other a PART which i have no idea what the hell that is. i barely know enuf to double clic on the filename in WinExplorer Downloads so that's what i did first on the .exe file cuz that one had a file size greater than zero (unlike the PART file) and got an error message saying Win7 didn't know what to do with this file and could i please suggest a software to use on it. 7) so i deleted it and started over with the same result and then i repeated step 7) only this time i got only the .exe file in my Downloads folder and when i double-clicked it i actually got the Install Wizard to run. 9) so while the Wizard was running i went and looked in my "Windows 7 In Depth" by Cowart & Knittel and found nothing in the index under RealTek so i went and looked at Drivers and based on clues i found there i went to Control Panel ->Hardware & Sound -> Device Manager ->RealTek HD Audio [hidden under expandable Processors - Sound, Video & game conrollers]->(LeftClick to get Update Driver Software), and wait about a year and a half for 'Onliine Search for Software', followed by the message "the best driver software for your device is already installed". 9)so by this time the Install Wizard has finished Uninstalling the previous version of the driver and wants me to RESTART and that's right now in real time so i am now closing this browser and if i ever finish restarting i will continue this response in a new reply window starting with step (10), whatever that turns out to be. the suspense is killing me.

Problem camera recording on iphone4

hello everybody , anybody can help me? i have the problem about recording video or taking the photo, when i do some video recording or photo somethimes it stopped with green column and stop any of moments and does nothing , and when i taking photo somethimes not allways appear green divided wiev and *****, and stop and then goes takink, sorry about my English, can anybody know what problem can it be, ?

Have you removed the clear plastic film from the front of the phone?
Stedman

Windows 10 Calls dropped problem with recording device

I now there are others experiencing this issue. Though, however not only when either I call someone or they call me the call drops and "problem with recording device" error message is displayed. It is also stating to those trying to call me or answering my call that I can only accept IMs.Can someone please help as its starting to become a complete waste of my time. I am running Windows 10 and Skype Version: 7.7.0.103

Please, run the DirectX diagnostics tool (32-bit). Run dxdiag.exe (Start - Run or Win key +R) then press enter or click "OK". Once the diagnostics completes, "Save All information..." to a text file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.
(i.e. compress DxDiag.txt ---> DxDiag.zip)

Skype Problem with recording device

After the windows 10 update it keeps saying "Problem with recording device" my camera works but, my microphone doesn't it worked fine before. The thing I use is a really old camera I don't know if that has anything to do with it.

Due to the age of the camera and lack of support from Creative your options are limited. I would suggest you connect the device directly to a free USB port on your machine. If you share it with several devices on a hub or extension the device can easily work intermittently. That type of issue can cause the audio to fail to be initialized, creating the problem. This can also occur if the audio half or both halves of the camera/cabling is intermittently failing as well. You have the option of switching to the generic Microsoft Video and Audio drivers to see if that helps as well. Below is a graphic on you how to update the drivers to the generic "USB Video Device". You can do the exact same thing for the audio half of the camera by updating it to "USB Audio Device" (which is what you might want to try first in this scenario).

Win 10 Problem with recording device

i upgraded to windows 10 yesterday and i was skyping just fine now i go to call someone and it says problem with recording device its really annoying people call me just fine but cant hear me at all i hear them i checked my mic its fine complete response please help me

Yeah no I'm having a very similar problem. Instead of me calling people or people calling me and my microphone not working. I can't even accept calls or make calls, it just drops the call and says "problem with recording device". But I tested my mic and camera and they are both working, so what's wrong? Why is this ruining my night?

Problem with recording and sound on Pavilion ze1000 series

I have an old Hp Pavilion ze 1250 running Windows XP (sp2) with 1gb Ram.
I'm trying to convert some cassette tapes to digital (with Audacity).
My problem: When I try to record using Audacity, it records about 10 seconds and then hangs. When I click Stop and try to play the 10 seconds back, it freezes and won't play anything. (After that, even if I import an mp3 file to work on, it won't play that either.) It also causes all the sound to go off throughout the computer. Songs will "play" in WMP but there's no sound in the speakers or headphones. (The Microsoft logo music won't play either when I turn the computer off.) I've tried resetting the volume and checking if anything is muted. Nothing .
I restart the computer and everything is fine.....sound works and Audacity plays.....until I try to record again.
I thought that this was only an Audacity problem....until I tried to record 60 seconds through Sound Recorder. The exact thing happens. It records about 10 seconds of audio, then freezes and refuses to playback. All the sound goes off throughout the computer and nothing solves it except Restart.
My sound/audio device is Conexant AC-Link Audio.
The Sound Playback, Sound Recording, Voice Playback, and Voice Recording are all defaulted to HP VIA Audio.
I have updated the audio driver. Recording is enabled. Is there something else I need to do?
Thanks.

Thank you for your reply.
I'll try some of those suggestions and see if that helps.

Problem Multiple record navigation in oracle forms

I retrieve multiple records using cursor fetch command in the select query i have given condition to retrieve details of employee no.
For example if we are giving an input as empno:100 then it retrieves two records of same emp no(100).It displays 2/3 records in the task bar when i navigate using push buttons it displays an empty record in the interface provided.(ie 3/3 records).How to avoid third unknown record displaying in the interface.

most likely the problem is during the population of the block using the query.
i assume that you are creating one additional record after the last record from your query..
so this must be either with the CREATE_RECORD or NEXT_RECORD problem in the loop.so you should check in the loop first if the record exists, then do CREATE_RECORD or NEXT_RECORD.

Problem during recording of CJ01 transaction for BDC

Hello All,
I am facing a problem during the recording of CJ01(Creation of projects) for creation of BDC program.
The problem is during recoding after entering the the first WBS element with level 1 and i press the '+' button to create one more WBS element with Level 2,the first WBS element with level 1 goes to the bottom of the line item table and now if try to create the WBS element with Level 2 in the first line it wont allow because of the fact that the first WBS element with level 1 is below it.
But if i enter the first WBS elemnt with level 1 in the first line and come to the next line and enter the second WBS element with level 2 it will create since Level 2 WBS is below the Level 1.But this approach cannot be used for doing a recording for BDC.
Can anyone help in this regard
Thanks in Advance
Ashish

Hi Ashish,
NW is right. It is not proper to use BDC for CJ01. You can get more control and better if you use the following function module,
1. Use BAPI_PROJECT_MAINTAIN to create project definition and WBS Structure in one go. see the documentation in the BAPI on how to use this. Post the resut in this forum if you face any problem
Ravi

KKF6N : Problem in Recording

Similar Messages

Maybe you are looking for