KKO0 report Characteristics

Hi
Thank you very much for your reply. I am understanding to validate one of KKO0 report with the data to check report values and database values. Could any one let me know which table contains characteristics and key figures.
Characteristics are Cost comp. str., Cost component.
Key Figures: Value type, Dr/Cr indicator and Version.
Thanks
Rajanikanth

Hi,
This particular field used in the report not holds the data and it uses the structure KKROBJ.
Basic data where the data generates will be saved in the tables - for example TCKH3 for cost component.
VVR

Similar Messages

Problem with KKO0 reports after upgrade

We upgraded to ECC6 10 days ago. At November month-end we ran CO43, KKS1/KKS5, CO88 and the KKRV (data collector). After KKRV runs, we run variance reports in KKO0. The data appearing in our reports does NOT reflect November's data. I'm wondering if KKRV did not run correctly; I know it loads summarization levels that KKO0 reports access, but it doesn't seem to be pulling all of our data for period 11. This problem is holding up our period-close process, so I appreciate any help!

Thanks for your response. I found that I had to run KKDV to delete old summarization levels, then rerun KKRV. I really appreciate you getting back to me though!

KKO0 Report - Problem with splitting Output Variances

Hi,
I have built a KKO0 report to allow split of Production Variances to cost components (Material, Labor, Overhead). I have done the required configuration to assign the proper cost component structure in OKN0 transaction.
In KKO0 the split of variances to cost components works for Input side variances and Output Lot Size Variance. However, it does not allocate variances to cost components for Output Price Variances and Remaining Output Variances. I had to create a separate row in the report to show Not Assigned line - where these 2 output variance categories appear as a total.
Has anybody had a similar problem and found a better solution?
Kind regards,
Karol

String tokenier splits on any of the symbols provided. Not a the approiate comibination.
Try using split
        String s="hai@#$hello@@$hey@#$hi";
        String[] sArr = s.split("@#\\$");
        for(int j=0;j<sArr.length;j++)
            System.out.println(sArr[j]);

KKO0 Reports showing no records

Dear Experts
I am trying to Execute the KKO0 Report but system is showing "No records were selected", i ran the KKRV it has done completed successfully.
Could any one please help.
Thanks & Regards,
Harinath.

Dear Sir,
Thanks for the Reply,
I ran the KKO0 reports for the same period for which i executed the KKRV, i will check this note and let you know.
Thanks,
Harinath

COPA Report - Characteristics

Hi.
A report has been created via KE30 in our test system. Rather than transporting it i'd like to create it in our prod system. The listing of characteristics are different tho. For example, Posting Date is available in test but not prod. Is there a setting that provides a subset of characteristics that should be unchecked in prod? any suggestions are appreciated.
thanks!

hi,
Yes, you can create report in Production,but there is no sync between systems(Development,Quality and Production).
Thanks,
Rau

COPA Report - Characteristics in PA

Hi,
We have maintained the Sales Group in the Customer Masters that get picked up in the COPA Report, generated by using the T Code KE24. The users while creating the Sales Order, changed the Sales Group in the SO, but the COPA Report is picking up the same Sales Group as is maintained in the Customer Master, even though the Sales Group had been changed in one of the Sales Orders. Could any one advise as to how can we check the flow of Sales Group in the Standard KE24 Report and how to check the same.
Thanks in advance.
Regards

Hi
Check up whether any derivation rule is set up (KEDR) for the sales group, wherein you derive Sales group value from Customer master instead of from Sales Order.
Jayaram

CO-PC Drilldown reports [KKO0]

Hi
I want to know how to find out the library in which the forma for a drilldown report is getting created
In T code KKO4 we create a drilldown report for CO-PC.. But, i want to know which libarary it is referring to
Painter reports other than drilldown reports are created using GRR1. Here we specify libraru before creating the report...
But when we define drilldown report, it never asks for a library
Can any one throw some light on this??
Regards, Ajay

I ran the Import program (RKCOBTR3) in DEBUG and stumbled across RKKBOLDR.
SAP also send me a message in reference to this, this morning. See Below:
Regards... Pam
+I guess you run (by accident) the report RKKBOLDR - this will switch+
+the kko0 reports to the old style of release 2.2. So please execute the+
+report RKKBOLDR via transaction SA38 - then you should get a message+
+KN 194 that the product drilldown uses KKROBJ records. After this the+
+issue should be fixed (maybe you need to re-import the standard reports+
+via the kko0 menue - environment - import reports again from client 000.+
+Kind regards,+
+Christian Gaertner+
+(development SAP)+
+PS: With the execution of RKKBOLDR you can switch between the old+
+product drilldown reports based on KKBOB and the new based on KKROBJ.+

Drilldown reports for CO-PC [KKO0]

Hi
I want to know how to find out the library in which the forma for a drilldown report is getting created
In T code KKO4 we create a drilldown report for CO-PC.. But, i want to know which libarary it is referring to
Painter reports other than drilldown reports are created using GRR1. Here we specify libraru before creating the report...
But when we define drilldown report, it never asks for a library
Can any one throw some light on this??
Regards, Ajay

I ran the Import program (RKCOBTR3) in DEBUG and stumbled across RKKBOLDR.
SAP also send me a message in reference to this, this morning. See Below:
Regards... Pam
+I guess you run (by accident) the report RKKBOLDR - this will switch+
+the kko0 reports to the old style of release 2.2. So please execute the+
+report RKKBOLDR via transaction SA38 - then you should get a message+
+KN 194 that the product drilldown uses KKROBJ records. After this the+
+issue should be fixed (maybe you need to re-import the standard reports+
+via the kko0 menue - environment - import reports again from client 000.+
+Kind regards,+
+Christian Gaertner+
+(development SAP)+
+PS: With the execution of RKKBOLDR you can switch between the old+
+product drilldown reports based on KKBOB and the new based on KKROBJ.+

Report Painter- Restricting Business Transactions

Hi,
I'm creating a report using report painter & would like to prevent Actual Overhead Distribution data (business transaction RKIV) from being reflected in this report. I can add business transactions in the report through Edit -> General Selection data. How do I block a particular business transaction in this report ?
Regards,
Sangeeta

Hi Sanjeeta,
there's several ways to do this:
(1) On the report characteristics window, enter range of values limited the values you want. To add more range, click on the more button, and keep restricting until you have what you want. Then select "no explode".
(2) My recommended way to do it is to create a basic SET via GS01. Table = GLPCT, Field=ACTIV.
On the set header, Select "Suppress". Enter the values that you want included, and leave out the excluded values. You can use range of course!
Then back on the report characteristic screen, enter you SET name and check the flag for entering sets. Select "no explode". With this option, if you ever need to change your Business transaction values, just change the SET and the report will query the updated values.
If you use a report variant to carry out the same solution, just note that everytime you need to change the values, you have to change the variant, transport, and regenerate the report (assuming that you do not change enterprise level variants directly in production)
Hope this helps,
Sam

Spend and Savings Report

Hi,
I got an issue in SRM. How to do this?
Spend and savings reports are two of the most common reporting areas within the sourcing organization. In addition to common report characteristics like vendor name, material number, calendar year, etc., a key characteristic for sorting spend and savings data is SCO (supplier subcommodity owner). By including the SCO characteristic within the Spend/Savings cube, end users will be able to rollup spend/savings based on the vendor classification. The SCO code is assigned to a vendor in One-Source. To make this meaningful to users, the description needs to be stored in R/3 and then extracted to BW.
Kindly reply,
Thankyou,
ABC

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Production Order qty in Report Painter

Can we get Production Order qty in Report Painter?
I have tried and used couple of Libaries but the values are not getting updated in report.
Can anybody please tell me which Library and Table combination to to get the result.
Kami

Hi
Prod order qty (Target / Plan / Actual) is available in KKO0 reports
To activate them:
a. OKN0: Assign a cost comp str here and choose Product Group = Material Group.. Transport this setting
b. Run KKRV every month after period end settlements are over...
c. Finally execute KKO0 reports
b and c you need to do every month... a is one time setting
br, Ajay M

Report to view Manufacturing variances - Purchase Price Variance

Report to view Manufacturing variances - Purchase Price Variance, Materials Usage variance, Labor Usage variance.
for above reports if standard tcodes are available in SAP please provide them or else explain how to develop these reports in SAP
Spandana

Hi
You can use KKO0 reports...
For that, assign your Cost Comp Str in OKN0 and choose Product Group = material group.. This is one time config
Execute KKRV monthly after all period end setttlements are over... Then you can view KKO0 reports
br, Ajay M

Costing Report summarized production cost by Finished Goods Material

Dear Expert,
I am looking for a report that can summarized the production cost in production order by Finished Goods Material Number.
or a report that can show me the cost components incurred related to a Finished Goods Material.
Can any expert enlighten me? please help.
Thanks a lot.

Hi
I would recommend the product drilldown reports in KKO0...
For this you will have to do settings in OKN0 (Asisgn a Cost Comp Structure and specify the Product Group)
After this, execute KKRV to collect the summarized data and then you can use KKO0 reports
It gives cost of production as per the Cost Comp Str and also the product no, product group, Prod Order etc
Regards
Ajay M

Changes in MM02 not reflecting in COPA lin item report

Hi,
In my project during data conversion material was grouped wrongly. We realised it later once we started designing COPA reports. The material is used by seven company codes. The basic material group defined in basic data is used by all company codes while Material group 1,2,3 4 and 5 are used by company specific defined in sales orgs 2 View in MM master(MM01).
I am designing report for three companies by using material group 1,2,3,4 and 5.
We tried changing the material group 1,2,3,4 and 5 for wrongly grouped materials in MM02. But in COPA report these changes are not reflecting. The grouping in report is still as per the data conversion grouping.
Please suggest on how should we rectify our material grouping to reflect in COPA report.
Regds

Hi,
in COPA reports characteristics are read from the COPA tables, they are not dynamically derived at the time of executing the report. In the COPA tables oyu will find the characteristic as derived at the moment of posting the line item.
If the characeristic that you want to rectify is in the definition of your your COPA segments - which you can check through TC KEQ3 - then there is possibility to carry changed master data over to past COPA data.
TC KEND allows you change the existing COPA segments according to current master data. However, it will not make changes to table CE1XXXX, where COPA line items are stored, but changes happen on the segment level (CE4XXXX).
This means that you always see the changes in COPA reports that read from segments, but not in line item based reports.
To change your output from line item based reports I see no other possibilty but to make correcting entries in CE1XXXX using KE21N or KEFC.
If you should consider using KEND please read the documentation for "realignment". It can create problems, for example if you have a SAP BW that is delta-updated from CE11XXX. Also your summarization levels for COPA have to be rebuilt after KEND.

Production costing - report

Hi All,
I have newly started working on production - costing report. Please send me any ppt files or pdf files ,, to understand the production costing procedures and concepts.. so that be comfortable in working on that.
regards and thanks.

Hi
I would recommend the product drilldown reports in KKO0...
For this you will have to do settings in OKN0 (Asisgn a Cost Comp Structure and specify the Product Group)
After this, execute KKRV to collect the summarized data and then you can use KKO0 reports
It gives cost of production as per the Cost Comp Str and also the product no, product group, Prod Order etc
Regards
Ajay M

KKO0 report Characteristics

Similar Messages

Maybe you are looking for