Klipsch ProMedia 2.1 compatible with iMac 12,2?

After researching on line for a superior 2.1  external speaker component to purchase I bought the (wired) Klipsch ProMedia 2.1 speaker system. The owner's manual states since ProMedia 2.1 has an internal amplifier, they are designed to use the "line-out" connector of (my) computer. I realize that my 27" iMac desktop (mid2011) does have a 3.5mm minijack output for both headphones & "line-out".
My concern is will the Volume Control of the control pod interface correctly allow volume control of my speakers? Considering that the owner's manual states: "Some soundcard and /or PC manufacturers may have software that must be adjusted separately from the WINDOWS volume control. -&- "SOFTWARE AND HARDWARE GAIN CONTROLS" directions are described for :  "Software Volume Controls in Microsoft Windows" - ONLY!
I (naively) have expectations that Best Buy, being that the are the only outlet that I could find that sells these Klipsch's speakers -&- have a APPLE "store within a (MF) store", should **** well know if the two items (Apple computers & Klipsch external speakers) are compatible with each other!!  SILLY ME!!!!
I do NOT suffer FOOLS, gladly!!
If someone has experience or an informed opinion, I would be very grateful for some input. I suppose I could unpack the speakers and experiment, but **** it, when will computer-affiliated businesses learn that PC does not equal MICROSOFT (!#$!%) WINDOWS?
-fpn

Wondering if you ever got these to work. We purchased yesterday on a whim & after set up smelled hot metal & LED light went out on the one that has the controls. Only noises we have got out of them is a strange loud feedback & a pop when they are turned on or off. What gives?

Similar Messages

  • I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

    I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

    A reply to similar question (Q & As , in product page Apple Store) says:
    "...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it."  Answered by Enrique T from Lima Oct  25 2013.
    If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
    You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
    Hopefully this helps.
    Good luck & happy computing!

  • I want to purchase iMac i7 and want to know if my pc based LG dvd player (usb) is compatible ? also my external Hard Drive (usb) is it compatible with iMac?

    wiil my PC extermnal dvd player and external hard drive be compatible with iMac ore do I have to by all new stuff?
    Can data be recovered from Hard drive and transfered to new iMac simply?
    Thank you for your time and consioderation,
    depending on this answer will decide if i change over to iMac or not
    Pierre

    All USB drives should be compatible hardware-wise. If the drive is formatted NTFS, then you can copy from it, but not write to it. If it is formatted FAT or exFAT, then you can both read and write.

  • NERO burned DVDs not compatible with iMacs?

    Can anyone confirm that DVDs burned with NERO
    (in this case NTSC, Region 0/NO region code)
    are not compatible with iMacs' DVD player?
    When I insert these DVDs they get mounted, but DVD player can't play them.
    Is there a way to fix this?
    Or does the maker of the DVDs have to use special settings in NERO
    to make them compatible?
    Thanks!

    Hi coxorange;
    Since Nero is not an Apple product, I suggest you ask the vendor who wrote it.
    Allan

  • Latest Blu-Ray burner compatible with iMac 2012 model?

    What is the best, latest external Blu-Ray player and burner compatible with iMac?
    I cannot get a real clear answer anywhere.... It also needs to run in both OSX Lion and Windows through Parallels software.....
    Please can I have makes and models and what is he best iMac software to use? Thanks

    Apple has shunned the Blu-ray format. If you need a Blu-ray drive look at the reviews @ the MacWorld website.
    Be prepared to bleed through the nose for this technology on the Mac side.

  • What OCR (optical Character recognition) software is compatible with iMac?

    What OCR (optical Character recognition) software is compatible with iMac?
    I am using OS X 10.9.1 on my iMac with an Epson CX8600 printer/scanner.

    My new Brother multifunction came with Presto PageManager. I can't recommend that it in the least. Its OCR is terribly inaccurate to the point of being unusable in my tests. Even normal sentences came out mashed together.
    I wanted to try IRIS, but it has no test version, just videos, that I could find, and emails to them just led to a Windows demo that is irrelevant. They ignored my email asking about a Mac demo, so I could not even try it out. That pretty much knocks it out of the running for me as this software is too expensive to just buy based on their promotional videos alone.
    Then there's Vuescan, and it's not too bad for OCR and supports about every device you could possibly conceive of using, and that's a plus. It was fairly accurate, but not as accurate as Finereader Pro. The interface is a bit complex to my taste.
    I've been testing out ABBYY Finereader Pro, and they do have a demo, and so far it seems to be the most accurate of what I've been able to test. It gets pretty close to everything on English and Spanish, and supports most common languages (check the list on their website). It even properly recognized syllables of phonetic Tibetan (using Roman alphabet, but it will not detect Tibetan). The UI is pretty good, but not perfect and there's no way to train for odd words you might need. I haven't tried it for Chinese or Japanese, but for my purposes, unless I find something more economical, I'll buy this one for its accuracy.
    I really suggest you download demos and try them for yourself as none of these are particularly cheap

  • Is Samsung Galaxy 4 compatible with iMac and other Apple products?

    Is Samsung Galaxy 4 compatible with iMac and other Apple products?

    Yes, the s4 is compatible with music and photo transfers between your imac.  I don't have experience with the cloud, but it should be the exact same thing. 
    Now, there will be a few differences between how you get the files onto said device.  With the iPhone, you may be able to do it wirelessly, but with the s4 you will have to plug it in. 
    The s4 will not work with iLife or iLife applications either.  However, bigger screen, more customizable ui and experience with samsung phones personally, I would recommend the s4 over the iPhone 5. 
    Finally iMac

  • Is the 3 inch CD compatible with iMacs.

    Are 3 inch CDs compatible with the iMac CD-ROM drive?  I purchased a camcorder which stated it was compatible with a OS 10.4 system.  When I opened the package I then discovered the size of the CD training/editing CD driver.  Has anybody out there ever insert a 3 inch CD into an iMac's side CD drive?   thanks

    No, you can only use standard size CDs & DVDs in your iMac's SuperDrive.
    see > Using nonstandard or irregular sized discs in optical drives
    Depending on the Camcorder, you maybe able to connect it straight up to the iMac?
    see > Mac 101: Connect your camera or camcorder
    If not, then you will have to use either a tray loading external drive or a DVD recorder to copy the video from the camcorder to a standard size disc.

  • Thunderbolt Compatible with iMac 2009 via MDP

    Just wanted to throw it out there for anybody who's curious that my Thunderbolt MBA (mid-2011) is successfully able to use my iMac (late 2009) as an external display even though it isn't Thunderbolt equipped. I was always wondering and finally know that it works just fine. In fact, it also works to daisy chain through the LaCie Little Big Disk (Thunderbolt equipped)... so basically my setup is MBA-->LBD-->iMac and everything works beautifully. Of course, the iMac is only useful as a display and can't access the LBD from its own system, but if you're looking for your non-Thunderbolt iMac to be a external display for a newer Thunderbolt equipped MBA or MBP, I can say it works for me. Hope that helps anybody out there who might be curious!

    1. Yosemite, but you need to increase the amount of RAM in the computer before it can be upgraded past 10.6.8.
    2. The current version of Flash is compatible with 10.6.8; the OS being too old isn’t the cause of that issue.
    (124103)

  • Klipsch Promedia 2.1 speakers and iMac 10.9

    Has anyone had any success hooking up these Klipsch Promedia 2.1 speakers to an iMac? Is there a driver I need to get from Klipsch? I hooked them up but all I could get was the iMac speakers to work. Went through 'Preferences' and changed the Apple settings but it did nothing. Any help is much appreciated.

    Wondering if you ever got these to work. We purchased yesterday on a whim & after set up smelled hot metal & LED light went out on the one that has the controls. Only noises we have got out of them is a strange loud feedback & a pop when they are turned on or off. What gives?

  • Will the new iPhone 4s be compatible with iMac version OSX 10.6.8, or will I need to upgrade the iMac operating system?

    Will the new iPhone 4s be compatible with my 5 or 6 year old iMac that I upgraded to Snow Leopard (10.6.8)? Or will I need to upgrade the operating system on the iMac?

    go to apple.com/iphone and look up tech specs.
    You'll find this:
    Mac System Requirements
    Mac computer with USB 2.0 port
    OS X v10.5.8 or later
    iTunes 10.5 or later (free download from www.itunes.com/download)
    Apple ID (required for some features)
    Internet access

  • Sony DVD-R 1x - 8x compatible with iMAC G5 isight?

    I just purchased a box of Sony DVD-R and after reading the warning on the box I'm worried that it could somehow damage my MAC.
    It reads: "Always check if your drive is compatible as using this disc on some drives/recorders might damage the disc or device."
    How can I check if the Sony DVD-R 1x-8x is compatible with my iMAC?
    Thanks for your help.

    Lots of people report successfully using Sony disks. I myself prefer TDK or Fuji, but Sony will work just fine.
    I assume that they are the full-sized disks and not the mini-DVDs that are used in a lot of camcorders. If so, I can't imagine how that disk would damage any drive.

  • What Camcorders Are Compatible With iMac

    I am looking to buy a digital video camera but I am not sure if they are "compatible" with my iMac. My friend just bought the JVC - Everio Digital Camcorder - Model: GZMG330HUS. It comes with Windows software and the manual has a brief mention of how to Backup-Up the video files onto the Mac but no mention of the video format being compatible with Mac. Anyway we tried plugging it into the Mac to see how it responded, and it did not, except that it saw it as a device that we could access the video files to copy then to the Mac hard drive. The Video files have an extendion .MOD and .MOI. Tried double clicking on the MOD (the video itself) and the Mac gave the message that no application exists to run it.
    I am currently on iMovie HD 6.0.3.
    I really want iMovie to recognize it so I can edit the video and make movies to sent to family.
    So, my question is whether any of you have tried this? Is there a solution to get this type of camera to be recognized by iMac? Are there other suggestions for compatible cameras in the $400-500 range (like this JVC is)?
    I went to my local Apple Store and they did not have an answer.
    Thanks in advance.

    Hello Brad,
    While IMovie 08 MAY work with that cam, you may not like iMovie 08! Be sure to have a look at it at your Apple store before you buy iLife 08. It is NOT an upgraded iMovie HD, but a whole re-write of the software, simplified and with less editing features than what you have with iMovie HD6.
    If you want to keep your current iMovie version, you must buy a miniDV tape cam with firewire. There are very good miniDV cams in your price range that will possibly give you better quality video than a hard drive or disc cam too, since miniDV does not employ the high compression of data that the other formats do. Hope that helps.
    Forest

  • PS CS6 windows compatible with iMac OS X

    Hi there, I purchased Photoshop CS6 for Windows back in March 2013, to use on my laptop. I just purchased a iMac 27-inch OS X 10.9.1 running Maverick upgrade. i was told Windows PS CS6 would be compatible with the new Mac. My question is... Will it work? i don't want to install and then have nothing but problems like I'm reading about after a few searches. Thanks for any advice

    Windows software doesn't run on Mac unless you install a Windows on it via Bootcamp or a virtual machine. Beyond that - yes, technically Macs are just normal PC hardware and once you have a working Windows version on it, your PS would work just fine. If you want to run it natively on OSX, you need to run a platform swap.
    http://kb2.adobe.com/cps/405/kb405819.html
    Mylenium

  • Is sennheiser px 210 bt compatible with iMac ??

    I am not able to connect my Sennheiser PX 210 BT with iMac and iPad.What should I do ??

    1. Put your headphone on discoverable mode
    2. Turn on Bluetooth a search for headphone
    3. When found, select headphone and pair
    Note: Make sure you turn off all nearby Bluetooth devices e.g. iPhone, iPod etc.

Maybe you are looking for

  • 500 Internal Server Error when deploying struts application on OAS 10.1.3

    I've installed the Oracle Application Server several times, this time with 10.1.3 our application doesn't run and we get the error shown below. Any ideas? It looks to be something with struts or tiles. struts.jar and tiles.jar is included in our depl

  • PDF Form Printing Text, but no Form

    I have an accountant trying to print a PDF Form.  It cannot be saved, but only printed.  When the form is completed and printed, it only prints out the entered text, and nothing else.  All other PDF docs print fine IT conditions: She prints to an old

  • Item value not showing up in PL/SQL function on another item.

    Basically, I am trying to update a database field based on the vaule of 2 other fields, but the item value dow not seem to get stored. No errors, it just shows up as a null value in the database. Here is the code inside the default area as a FL/SQL F

  • Does AppleTV(v2) output 24-bit audio through TOSLINK port?

    I have some high-definition audio files (24-bit/44.1KHz and 24/96) in Apple Lossless format. I also have what I thought was a simple question: Does the AppleTV support bit-perfect playback of such files? In other words, will the AppleTV stream them w

  • Api for mapping

    Can we write a java program (or another langage) be used to perform the mapping ?