KM content migration from EP5. to NW2004s

Hi all,
Can you tell me if its possible to migrate KM content from EP5.0 to NW2004s?
I know that the only scenario supported by SAP is the migration from 5.0 to 6.0 and then upgrade to NW2004s.
But are there any tools that could be use to perform this migration directly from EP5.0 to NW2004s?
Thanks and Best Regards,
Paulo Ruivo

Hi Paulo,
As suggested by SAP recommended way is to migrate from EP5.0 to EP6.0 then upgrade to EP7.0.
No ,there are no standard migrating tool for migrating content as the way u want.I am afraid you may have to do it manually.
Regards
Rani A

Similar Messages

How to content migrate from e-room to sharepoint using powershell

Hi,
How to do content migration from e-room to share-point using powershell.
Please give step by step process and give some idea about migration using powershell and other tools.
Thanks,
inguru

Hi,
There is no direct content database migration approach from eRoom to SharePoint.
However many third party tools such as Metalogix, Tzunami, and AvePoint are available to migrate eRoom content to SharePoint as well as you can write your own utility
to migrate content since there are various eRoom API available for the same.
Thank You, Somnath Matere

KM content Migration from EP 5 to Ep7

Hi There.
We are trying to migrate Km content from EP5 to EP.. i know that this can be achieved through ICE. and i have seen couple of blogs also but i am still not able to get any step by step info.. along with all pre-requisite..
Can you please share your experience and methods in KM content migration using ICE.
Thanks for your help.
Rgds

Sudhir,
this <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/38effdbf-0d01-0010-c3ad-9d9547a492af">How To ... Distribute KM content using the ICE protocol</a> should still make it..
rgds

ConfigurationException while migrating from EP5 SP20 to EP6 SP19

Hi,
   I'm migrating content from EP5 SP6 to EP6 SP19 and am following the document "Migration of SAP Enterprise Portal 5.0 to NetWeaver '04". All support platform plugins checks passed.
However when i start migration: i get the message
Error#1#/System/Server#Plain###Error occurred while initially starting application sap.com/tcmobileadminea:Application sap.com/tcmobileadminea cannot be started. Reason: it has hard reference to resource tc_SL_SDM_Client with type library, which is not active on the server.#
#1.5#0013724BF3C7005F000000080000138C000428E24344A4C9#1170852163146#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#37##ctsgvcsd08_J2E_31510050#Administrator#697221d0b6a811dba6230013724bf3c7#SAPEngine_Application_Thread[impl:3]_5##0#0#Error#1#/System/Server#Java###could not display message
[EXCEPTION]
#1#com.sap.portal.upgrader.ConfigurationException: Configuration not yet tested , process was not started
     at com.sap.portal.upgrader.UpgradeProcess.isConfiguredOk(UpgradeProcess.java:2150)
     at com.sap.portal.upgrader.ui.UpgraderUI.doContent(UpgraderUI.java:195)
Any assistance to resolve this would be of great help.
Thanks
Sumathi

After application of Java SP20 I have the same error:
"Error occurred while initially starting application sap.com/tcmobileadminea:Application sap.com/tcmobileadminea cannot be started. Reason: it has hard reference to resource tc_SL_SDM_Client with type library, which is not active on the server.#
On our J2EE we are not able to find the "tc_SL_SDM_Client " service or library and the property files seems to be ok.
Before the application of Java SP20 the J2EE was working fine.
DO you know in which SCA/SDA the tc_SL_SDM_Client is supposed to be ?
regards

Content migration from old to new database server

There is thread upon thread upon question (as well as answer upon answer) of this already. I have 3 farms running concurrently. 1 production, 1 development and a new production (farm A, B and C respectively). Farm A's databases are on SQLa\SP while Farm
B is on SQLb\Beta and Farm C on SQLb\SP. I've successfully copied the content database over from Farm A to Farm B & C without an issue. Farm A and C are identical except for server names (service accounts etc).
What I'm trying to do now though is just a simple content refresh from FarmA to FarmC. Aside from shutting down FarmA and C, backing up & restoring the database again, is there another way to do this?

Hi,
According to your description, my understanding is you want to find another way to change farm A production environment to farm C production environment aside from shutting down FarmA and C, backing up & restoring the database .
It involves moving a farm.
Moving a farm typically involves the following steps:
Set up the new server farm
Move the databases to the new server farm
Shut down the old server farm
So how to move the databases to the new server farm is the point. For moving all the databases, you can backup and restore. Another way is detaching and attaching as the thread states:
http://sharepoint.stackexchange.com/questions/25215/the-best-practice-for-moving-content-database-between-two-farms
But copying the files is also a dangerous option due to file locks etc, and you don't want to take down the farm just to copy the data.
For more information, you can have a look at the blog:
http://www.codeproject.com/Articles/664029/Migrate-SharePoint-s-SQL-Server-to-another-SQL-Ser
Best Regards,
Eric
Eric Tao
TechNet Community Support

BI business Content migration from 3.x to 7.0 - prerequisites

Hi all,
We have a old business content 0CO_OM_CCA_1 currently in use under BW 3.5, now we want to use this in BI 7.0. However, I do not see the migrate option in the context menu for this BC. I would like to know what are the prerequistie for migration of bC from 3.x to 7.0 in order to enable the migrate function.
regards.

That's right, business contents come in 3.x and during activation in BI 7 we now have option to emulate it as a BI 7 or keep it in a 3.x structure. However, what about an old 3.x info object that contains data from 3.x structure and is now required in BI7. How can I emulate it in BI7? Primary research suggest that the context menu of 3.x, in this case I don't have a migrate function available in the context menu for the said infoObject.
Is there any specific BW patch required to carry out migrate tool?
Regards.

Portal Content migration from EP 6.0 to 7.3

Hi Guys,
We are upgrading NW ortal from 7.0 to 7.3.
Some of the content on current portal (7.0) is from EP 6.0 , and we want that too to migrate to new portal 7.3.
The content includes some XRPM Business Package and Cprojects stuffs.
Please suggest what should be approach for the same. What difficulties/challanges we might face ?
Thanks In advance !
Regards,
Anubha

try with theme editor -> import and export
This would have happened because of version mismatch. The standard themes will be automatically updated but the custom theme is of older version. It is better to recreate the theme.
you have to export themes to a zip file and then import this exported theme into the target portal.
I hope you should redesign the old custom themes as they may not work peoperly due to version mismatch.
for more information check the below thread
cutomer theme is not working properly
Points are welcome if it is helpful
Koti Reddy

Content migration from 5.01 to 6.2

Any clue how to migrate a portlet based on the Announcement web service from Content Server 5.01 to Publisher 6.2?
After a regular migration the content item is not migrated into the Content Server.
Thanks!
Val

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Content Migration from mediawiki

Hi all,
is there a tool or some scripts to migrate the content of a mediawiki to the CQ wiki?
Thanks in advance,
Michael

Hi Lars,
thanks for your hints, but using this methode means loosing all the history, doesn't it? And what about the wiki syntax if I make an HTML dump?
I have googled a lot and there are so many tools to migrate mediawiki to Sharepoint. That means in my eyes that it should be possible to (automatically) migrate the content also to CQ wiki...
Thanks,
Michael

Content Migration from Aqualogic Publsiher 6.4 to Oracle -Stellent

has anyone tried this in their latest development? Any information or strategy you can share...
Thanks in Advance...
Edited by: user3047732 on 17-Oct-2008 12:25 PM

> I have checked the Database upgrade guide in service.sap.com and I got upgrade Docu (Oracle 9.2.0.6 to Oracle 10.2 WINDOWS ).
You also read it?
> Now my question is my current Oracle release and patch is oracle 9.2.0.4 .
> Kindly advise I have to upgrade patch 9.2.0.6 and then I have to Oracle Upgrade 9.2.0.6 to 10.2
Page 11 in the upgrade guide - "Planning section"
"If the source database runs Oracle 9.2.0.4, 9.2.0.3, 9.2.0.2, or 9.2.0.1,
you need to update the source database to patch set 9.2.0.6 or later."
Actually the guide from SAP is very good, you just have to read it and follow it step-by-step. Also "mix in" the notes mentioned in the guide.
Markus

Portal content migration from 7.0 to 7.3

Greetings,
We have installed a clean version of 7.3 portal environment (vanilla).
I have transferred all 7.0 portal content (most of it - WAD reports & ECC transaction iViews) to 7.3 environment by using standard transport mechanism.
After I execute any of those transferred reports iViews, I receive a portal exception, which doesn't appear in the default trace log file, or any other log file whatsoever.
My question is - is there a special procedure to move standard portal content (like WAD reports) to 7.3 environment, or a regular transport would work as well?
Thanks in advance!

Hi Ivan,
There is no special procedure to be followed for transport mechanism. But make sure that the installations are made correctly and the system for communication has been created and tested the connection successfully in Sys admin -> Sys landscape
Paste the exception which you are getting. Also where did you look the logs?
Thanks,
Mahendran B

Migration from EP 5.0 to EP 7.0

Hello,
Experts, I have to migrate from EP5 to EP7......below is what I believe....kindly comment
For migrating from EP 5.0 to EP 7.0 you are actually migrating from Non-Netweaver environment to a Netweaver environment.
And you need to first migrate from EP 5 to EP 6...i.e. from Non netweaver to netweaver....
and then only you can migrate from EP 6 to EP7....
Please correct me if I am wrong.

Hello Experts,
Please comment.

Tab Content disappers : Migration from 6 to 6i

I have a form with multiple tabs. It works fine with Forms 6.
Now when we want to migrate to 6i, I am facing problem when I
navigate from one tab to another tab.
When the Form starts, it shows first tab correctly. Now if I
click on another tab, it goes to that tab but doesn't show the
items on the tab. If I come back to old tab, same problem.
These are setting I have..
Main Canvas: ( Type : Content )
Viewport X position on Canvas : 0
Viewport Y position on Canvas : 0
Width : 9.2
Height : 6.8
Tab Canvas : ( Type:Tab )
Viewport X position : 0.1
Viewport Y position : 0.5
Viewport Width : 9
Viewport Height : 6.3
Tab Page : ( Canvas type:Stacked )
Viewport X position : 0.2
Viewport Y position : 0.8
Viewport Width : 8.8
Viewport Height : 5.8
Viewport X position on Canvas : 0
Viewport Y position on Canvas : 0
Width : 8.8
Height : 5.8
Any clues would be highly appreciated.
Thanks
Rahul

Hello Deepak Kori,
thanks a lot for your reply!
I read this SAP note and the note with additional information (129352).
As i understand we can do a homogeneous system copy as follows:
- setting up the new server (2008x64) with a MAXDB instance (7.6.03.09)
- Creating a backup (migration) from the source system (7.6.00.18)
- recovery with initialization of this backup on the new server
- upgrade of the DB instance to SAP MAXDB 7.8.02.29
If this is correct, i think we have a good strategy!
Thanks
Martin

Migration of Content Databases from SP 2010 "Domain A" to SP 2013 "Domain B"

Hi there,
I am in the process of planning the migration of my SP Foundation 2010 farm to SP Server 2013. I have tested this previously with the following steps and was successful:-
Backup DB on SP2010 SQL
Restore DB on SP 2013 SQL
Run Test-SPContentDatabase –Name WSS_Content_*** –WebApplication
https://intranet.***.com.au
Mount the DB - Mount-SPContentDatabase –Name WSS_Content_*** –DatabaseServer DomainA\SHAREPOINT –WebApplication
https://intranet.***.com.au
Convert Web App - Convert-SPWebApplication -Identity
https://intranet.***.com.au -To Claims -RetainPermissions –Force
Now, the goal posts have changed and we may be moving to another domain. Now, when I run
Test-SPContentDatabase command in Step 3 above on Domain B, I get the error Login Failed for 'DomainA\SP_admin'
- which makes sense.
What would be the best way to restore a DB to a new domain?

you have to perform the same steps....you need new account on the new Domain. then you have to run the migrate user command.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/8f3d25c1-f573-4f29-955c-0275c0224109/migration-of-content-databases-from-one-domain-and-ad-to-a-new-domain-and-ad?forum=sharepointgeneralprevious
here is good script for migrate user;
http://blog.sharepoint-voodoo.net/?p=68
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Migration of Content Server from win2k3 to win2k8

Hello,
Now we have installed Conteny Server 6.40 on Windows 2008 server.
URL check for the Contenet Server is also working.
We wanted to migrate from Content Server windows 2003 server to Windows 2008 server.
In the process we have successfully taken the Back up of Content Server on win2k3 server and restored it on win2k8 server.
Maxdb is the database that we are using.
Now,i wanted to know what are the steps to be follwoed after the successfull restore.
How to create Respository and regarding of ContentServer.ini file and security folder settings ( they need to be copied and if yes when?).
Please help with your suggestions or giving out some referenece documents.
Thanks,
deepak

It depends largely on how you have installed Content Server but if you check the [Operating Manual for SAP Content Server|http://help.sap.com/erp2005_ehp_04/helpdata/EN/8c/e9ddbb5d9a524bbb7854d31b963248/frameset.htm] -> Special Procedures ...it should give enough info for your requirements.
Nelis

KM content migration from EP5. to NW2004s

Similar Messages

Maybe you are looking for