KM content upload error

Hi,
I am trying to upload KM content through transport package nothing is displayed in pending imports to start the import process. I have rename the .zip to .kmc still the same issue. I have checked the log files no errors are displaying related to my issue.
Could you please help me to resolve the issue.
Regards
Suresh

Hi Suresh,
I understood Your post as ,you are trying to upload a kmcontent file into the system :
1)where as while importing Nothing is appearing in the Pending Reports ?which  is available with you as Zip file which was converted to .kmc?
-->>when Trying to import >FIrst go to package upload in imports>first brose your target package-->and try seeing the pending imports where from that context you might be able to see the file which can be imported.
kmc file once they are exported may be in .kmc or .zip file which we can be used them for export by making them from package upload to target system.
Thanks
Aswin Girmaji.

Similar Messages

  • XML Content Upload Error - Failed to Find Handler

    Hi
    I am trying to upload an xml file using the tools under system administration but when I start the import I get the error cannot find handler. There are no other error messages and the view report features do not work. The handlers xml file property is <b>content.handlers.xml</b>
    I have found a few postings on this issue but the only solution I have seen said that you need 2004 s
    I am using 2004s
    <b>version=7.0.8.0.0
    Implementation-Version=7.8.0.0.200606180650</b>
    Can anyone help me to identify what is missing?
    Many Thanks
    Andy Irvine

    Hi Martin
    I downloaded an xml file containing worksets. The purpose being to mass change the sort priority of  a folder within the workset (used as an entry point).
    I want to change the sort priority of the folder with id 'mywork' from 100 to 10. As there are many roles (100s rather than 1000s thankfully)  I figured this would be the quickest/easiest solution. I used find & replace on a a large section of the my work section and changed only the section shown in the code below to be 10 instead of 100.
    [code]
    <Attribute name="com.sap.portal.navigation.Priority" type="string">
        <AttributeValue value="10.0"/>
        <Attribute name="administration" type="string">
        <AttributeValue value=""/>
      </Attribute>     
    [/code]
    The head of the file is as follows
    [code]
    GenericCreator author="XML Creator" version="XML Automatic Creation" mode="clean,execute" report.level="success" createMode="3" default.locale="en" ignore="false">
         <Property name="parent1" value="pcd:portal_content/com.burberry.content/Europe"/>
         <Context name="worksets" objectClass="com.sap.portal.pcd.gl.GlContext" create_as="0" parent="$">
              <Attributes>
    [/code]
    It errors out straight away which is what led me to believe that maybe this was an issue with the portal configuration rather than my xml file. Any suggestions?
    Message was edited by:
            Andy Irvine

  • MDM - XI Content upload from Market place ?

    Hi,
    I will be working on MDM & ECC integration using XI. Please let me know if I need to download any MDM content into XI Repository. If so, what does MDM content would contain ?
    I was referring to the following thread and bit confused. Please help with any documentation related to this subject.
    Thread: MDM - Xi Content upload error
    Re: MDM - Xi Content upload error
    Thanks,

    Hi,
    Yes, you will need to download a couple of ZIP files from the XI Content of the MDM's Support Packages and Patches.
    These ZIP files contain .tpz file to be imported into the Integration Repository.  The .tpz files contains interface definitions and mappings to work with MDM.
    Regards,
    Bill

  • Content Generation Error in InDesign

    "Content Generation Error" in InDesign-every time I try to preview my document I get the following message:[Error: The assets for one or more overlays could not be located. Verify the assets used are available on disk, then update the article.]. Everything was working fine perfectly just the other day when all I did was preview it in InDesign.  I can't think of anything that I could have done to ruin it.  All my links appear to be fine, and so far I've gone through and stripped most of the document to find the problem but it won't work unless I take out 99 percent of the document.  It seems to have multiple issues and appears to be an entire corrupted document rather than just a few issues with MSOs. The document consists of five pages with vertical and horizontal layouts and I have slideshows, scrollable frames, and multi-state objects but no audio.

    That was the first thing I tried because obviously I wanted to find out if it was a problem with my file or a general issue with all uploads to that folio. It seems to be working ok now, although I still have no idea what the problem was and I have never seen that error message before :s
    Thanks for your response.
    Adam

  • PCD folder in KM content throwing error (WPC Iviews)

    Hello KM&C Forum Users,
    After following the initial configuration for the WPC in SAP Help I tried using the pcd connection that I had made in the KM content to add an iview to a Web page. I get the following error in the Content window of the KM Content:
    System Error
    An exception occurred during program execution
    Go back and try again
    These are the errors from the default trace:
    null java.lang.ClassCastException
         at com.sap.portal.pcd.km.rm.PcdFolderNode.getChildren(PcdFolderNode.java:82)
    and
    null java.lang.ClassCastException
         at com.sap.portal.pcd.km.rm.PcdFolderNode.getChildren(PcdFolderNode.java:82)
    (These are just partial snippets of the logs. If requested I could add the complete log entry)
    I have followed the directions in SAP help how this connection is to be made (checked and rechecked) and I also found the instructions of how to do the additional configuration in the wpcDragExplorerEntryPoints. I added the following:
    displaymode=select,maxproviderprio=30,entriesperrow=5,sharedcontent=/wpccontent/Cross-Site Content;/pcd/portal_content/Web_Page_iViews
    Additionally I checked the Virtual Root Repository and the PCD repository is not excluded.
    I also checked and insured that in the PCD repository the Property Search Manager is on "Not set".
    I have checked through notes and found note 1450398 and uploaded the patch  for my System which is by the way
    NW 7.0 SPS 21 stand alone portal
    I have also found 2 different notes that mention an "inconsistency between com.sap.tc.pcd.kmsearchadapter.par and the servicepack " but it wasn't mentioned what was done to remove the inconsistency.
    As you all can see I have been through notes, Wiki's, Forum entries. SAP Help and SAP notes to no avail. Can anyone out there help me to get rid of this problem?
    Thanks in advance
    Paul

    Hello Raghu,
    Thanks for your quick reply. As I mentioned above I have seen these notes but unfortunately I can find no information to the inconsistencies. I am the Portal SAP Basisin this instance and haven't found anything that would help me in this direction. Maybe if you could ask your Basis people what had to be done that would help me considerably
    Thanks again
    Paul

  • Content generation error. [Error: exportArticleFolio]

    Hi guys! I'm getting the error "Content generation error. [Error: exportArticleFolio]" when trying to update an article (yesterday it was successfully uploaded and updated). The same issue when try to upload it as a new article.
    No errors are displayed when open Preflight panel.
    I can successfully update other articles....
    So seems that something is wrong with the article that is need to be updated.... But it's difficult to understand what is wrong from this error message. Maybe somebody faced with this issue and can give me an advice?
    Windows 7, Indesign CS6 version 8.0.1

    If you encounter the problem with specific ID doc, would you be able to share the document with me for investigation? If so, please package the ID document and email me offline: [email protected] We will investigate and get back to you with any finding of the root cause. Thanks!
    Jianlan

  • Content generation error: invalid url for web content overlay

    Hi,
    I am having an error message " content generation error: invalid url for web content overlay" when I want to upload the article.
    I don't have any link with that article and this is my 1st time having this kind of error. I am using indesign CC
    Please help.
    Thanks,
    Rush O

    I’ve found watching the process helpful to narrow down the page.
    Working off a duplicate of the file, delete one layer at a time until you figure out what layer the problem is on.
    From there it’s a bit easier to narrow down.

  • Help! Content generation error. [Error: Unable to read JPEG.]

    Hey all -
    Havben't seen this one in the forums. I'm importing an article into an existing folio. The processing status bar goes to the end, but before upload starts, I get this error:
    Content generation error.
    [Error: Unable to read JPEG.]
    Any idea how to troubleshoot this? I'm up against a hard deadline and really need to get this worked out. Thanks!

    In that case it would be good, if the error message could be more specific; i.e. telling the name(s) of the JPEG images.
    However, you could check all placed JPEG images, if they can be opened with PhotoShop.
    Uwe

  • "no content selected" error on nokia 5310

    So i bought a pretty little 5310, and am loving it so far. have hit a few speed bumps when trying to upload with my mac, but have got alomst all of them fixed. almost.
    the last time i updated my music library, i noticed my dedicated shortcut keys on the left of the phone no longer work on their own.
    when i go through the menu, or use the shortcut key to initially access the music player, the dedicated keys will work for pausing, and skipping tacks. but, say i'm at the 'home' screen of the phone , and just hit the keys on the side. .. they show a 'no content selected' error.
    when, in the past, after my first library update, if i hit those keys at ANY time, wether the music player was open or not, it would automatically play my library.
    there is probably a ridiculously easy solution to this, but to hell if i can figure it out!
    i've read every post on every board i could find, and read the manual six times.
    any suggestions?

    i've fixed the error!
    apparently, the phones have TWO music players.
    one in the menu shortcut key, and one buried in the 'media' section on the phone.
    apparently, to play a playlist from the dedicated keys on the side, you have to use the BURIED music player in the media section.
    once in there, select playlist, and choose your playlist. for me, i had to create a new playlist and manually open AND add EVERY song in my library to that new playlist, so that it would play nonstop with the keys.
    try that - it may be the same issue for you, as my problem happened after i reformatted the memory card and re-added new music.

  • Content generation error. Please confirm the file can be opened in InDesign?

    I have been trying to upload a couple of files to a folio that was built yesterday, everytime I try to upload one of them I recieve the error message "Content generation error.Failed to open the InDesign file. Please confirm the file can be opened in InDesign." I have no idea why this is happening as one of the files was successfully uploaded to the folio yesterday and I have not made any changes to it since. I have a also restarted and trashed InDesign preferences so there are no problems there. If anyone has any answers or has experienced any similar problems could you please let me know.
    Thanks
    Adam Flanagan

    That was the first thing I tried because obviously I wanted to find out if it was a problem with my file or a general issue with all uploads to that folio. It seems to be working ok now, although I still have no idea what the problem was and I have never seen that error message before :s
    Thanks for your response.
    Adam

  • ACFUPDOWNLOAD  Upload Error 223

    Hi everyone,
    I have a couple of questions:
       Is it necesary to have configured a content repository in order to use ACFUPDOWNLOAD  ??
    I ran the test application WD_TEST_APPL_ACFUPDOWN but it's not working fine.  I have a problem uploading to my filenet repository:
    Security list message: Wrong server for upload
    Upload Error: 223 ,url: http://sc01ul03100.ceh.jcyl.es:9081/acsap/dispatcher?create....
    Do you have any idea why is this happening?
    Thanks in Advance.
    Carlos.

    >Is it necesary to have configured a content repository in order to use ACFUPDOWNLOAD ??
    Yes and no.  By default the ACFUpDownload is designed to only work with the SAP Content/Cache server or KPro. Without a content repository pointing to one of these external applications, it won't work.
    However you can create your own ICF handler that simulates an SAP Content/Cache Server.  It allows you to perform ACFUpDownloads and store the contents in a temporary table on the ABAP server so that the information can be passed back to your Web Dynpro session directly.  There is a code sample of this on SCN:
    Tutorial Video:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/109b9b52-bc00-2c10-8786-e4c5e96d7e04
    Source Code:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70645070-bb00-2c10-f086-f126721acdb4

  • Upload Error message: HTTPS protocol is not supported

    Hi,
       Whenever I do a quick par upload i'm getting an 'Operation failed' message to check sap-plugin.log.
       Log says
    Upload Error message: HTTPS protocol is not supported, please ensure this server is not using HTTPS. My webdynpro applications are getting deployed without any issues.
         How to resolve this?
    Thanks
    Sumathi

    Hi Sumathi,
    As there are often problems with the Quick PAR Upload reported, I would suggest to use the "normal" PAR upload from the icon tray (you have to activate the portal icons in the icon tray). That is almost that "quick" (one or two clicks more needed, we don't talk about more than a second) and - it works (it least it should, and at least it works in most cases even if the Quick PAR Upload fails).
    Hope it helps
    Detlev

  • Error in crawl log "Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "

    Hi 
    I get the following error in my crawl logs
    "Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "
    Because of this i suspect, the search results are not including those aspx pages marked as "Hide physical urls from search".
    This error is not available in the another environment where the aspx pages are coming in the results.
    Thanks
    Joe

    Hi Joe,
    Greetings!
    Reset the index and re-crawl. That usually clears it
    If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
    Probably you need to debug the BDC code that underlies the external content types.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/41a86c43-151d-47cd-af73-967a4c940611/lotus-notes-connector-error-while-crawling-lob-contents?forum=sharepointsearch
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Image / file upload error         cannot upload image even after setting write permissions

    Hi there everyone
    I am having this problem when I try to upload a file (image file) to my server
    I have a dynamic for working fine , all the other fields insert the information ok then I try to add an image upload behaviour to a file field
    When I try to upload the file I get this error
    Error:
    An error occurred while inserting the records.
    File upload error: File upload error. Error creating folder..
    File upload error. Internal error.
    Developer Details:
    tNG_multipleInsert error.
    An error occurred while inserting the records. (MINS_ERROR)
    File upload error: PHP_UPLOAD_FOLDER_ERROR
    File Upload Error. No write permissions in "../../productimages/" folder.
    (FILE_UPLOAD_ERROR)
    So I login to my server and change the write permissions to 777 and then try again and get the same message
    I have closed DW and tried again and still get the same message......
    I think I have followed all the steps correctly..... I have done the same type of forms many time and tested them locally on WAMP testing server and all work ok......
    So..... Anyone got any ideas
    Any help would be great
    Have a nice day

    On 5/17/07 4:26 PM, in article [email protected],
    "Gü[email protected]" <> wrote:
    >
    > To my experience servers behave differently -- on some I really had to use
    > 777, others are happy with 755.
    >
    > in regards to "any user" :: On most ADDT respectively MX Kollection - based
    > backends I made the image & file upload feature available to user having e.g.
    > the "levels" 1 & 2, but not 3 -- I wouldn´t expose something like this to all
    > users
    >
    > Günter Schenk
    > Adobe Community Expert, Dreamweaver
    My backend is only for admin, so they are the only ones who can access the
    upload pages. My concern is an images folder on the site being 777. Can't
    anyone from the outside plant a file in that folder if they just know where
    to find it using an ftp program? ?

  • ERROR upload: Error in uploadXMLFiles after upgrading from 10.2.0.4

    After upgrading from 10.2.0.1 to 10.2.0.4 on a newly installed Oracle server, I could not use dbconsole any more. It would not display the login page at http://myserver:1158/em. I tried different browser IE, FireFox, and Chrome. It is the same. Then I checked the %ORACLE_HOME/{server_sid}/sysman/log/emagent.trc and found this errors in it:
    2010-02-04 14:11:45 Thread-2552 WARN command: Job Subsystem Timeout set at 600 seconds
    2010-02-04 14:11:45 Thread-2552 WARN upload: Upload manager has no Failure script: disabled
    2010-02-04 14:11:45 Thread-2552 WARN upload: Recovering left over xml files in upload directory
    2010-02-04 14:11:45 Thread-2552 WARN upload: Recovered 0 left over xml files in upload directory
    2010-02-04 14:11:45 Thread-2552 WARN metadata: Metric collectSnapshot does not have any data columns
    2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric Disk_Path does not have any data columns
    2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
    2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
    I tried emctl secure, upload, start and stop many times. It is still the same. It is a new server and a new database. Any idea?
    TIA!

    I did not change password. It is not password issue.
    According to Oracle support,
    1) the error "2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds" can be ignored.
    2) The error: 2010-02-05 02:52:19 Thread-3864 ERROR util.files: nmeufile_remove D:/oracle/product/10.2.0/db_1/orsvp04.OCTAGONRESEARCH.COM_vp/sysman/recv\00000000365.lk: Error in lfidlb. Error = 0 (No error)
    could be because I used "emctl start agent" , which are not allowed command for DBconsole. The correct one is "emctl start dbconsole"
    Thanks for your input!

Maybe you are looking for