KM/DB Update Program

Hello!
Last week at ASUG, it was mentioned in passing that a tool is either being developed or has been developed that will allow for mass updates of document metadata. What we heard is that the tool will export all of the metadata to an Excel spreadsheet where you can make the necessary updates and then reload it into the portal and your metadata changes will take affect.
Can you tell me a little bit more about this tool? Is it available today? Does it work with EP 6.0? Where can I find it?
Thank you!
Kelly

I have not yet heard anything further since I posted this question. Sorry!
Kelly

Similar Messages

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

HT1925 When I try to uninstall apple updater I get a message that says " The feature you are trying to use is on a network resource that is unavailable." I dont understand this. How can I finish uninstalling the apple update program?

When I try to uninstall apple updater I get a message that says " The feature you are trying to use is on a network resource that is unavailable." I dont understand this. How can I finish uninstalling the apple update program?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.

I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted? "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.
I stopped in to see one of the genius at the local store who referred me to "Windows Installer 4.5 Redistributable" (I am trying to install it on a Windows XP System)
The last version on iTunes on my PC was iTunes 7.
Thanks for your help,
Julia from Woodridge

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Error 1720 while updating program

Hi everyone i seem to getting this error message when i try to update the software updater program,
Error 1720,there is a problem with this windows installer package. a script required for this install to complete could not be run,contact your support personnel or package vendor. custom action kill_process script error -2147023828, : Line 5, Colum...
anyone know what to do? i cant install it

http://www.elakiri.com/forum/showthread.php?t=172915&page=30
I copy the relevant content, just in case:
yo its updating...... if u have any problem installing the PC suite try this
error: 'Error 1720. There is a problem with the windows installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action Kill_process script error -2147023898,: line 5 column 1,.
the very best solution:
This is easy to get around. The error is only in Nokia's combined installer, not the NSU installer itself.
1. Download and install 7-Zip. Don't worry it's free!
(No, neither WinRAR nor WinZip will do for this)
Get it here: http://www.7-zip.org/download.html
2. Use 7-Zip to extract the contents of NokiaSoftwareUpdaterSetup_en.exe into a folder. You should now have a bunch of folders and a few files.
3. Go into Packages, then NokiaSoftwareUpdater, then Setup
4. Launch NokiaSoftwareUpdater.msi (double-click it).
5. That's it!
Bruno Unna
Public key available.

RE Table Update program with tcode ..

Hi
friends i had done a update program for HR module pa0267 and using ldb
but when i run this program in se38 the it workks fine ..but if i run this program trough tcoe i get the selection screen and when i run it it throws me out not even on se38 .
regards

hai
i think u hav the problem of T-CODE parameter.... so u go the se38 and then go to Display object list(CtrlShiftF5)... then delete the T-CODE and creat again new t code abd try again.... after that go to se 93 and checked ur program coz some time ur program should be error... of any wrong program plz put the correct program and save then run the tcode... I think i wil be wk now....
regard
nawa.

Re-Org/Update Program for Route determination

Hi
does anyone know if there is a Re-org / Update program for Routes ?
I have added new routes, against Shipping conditions from NO and SE to many Western European Countries , and would like to update Sales orders/ deliveries with these new routes
Many thanks for your advice
Tony

Hello Tony
For the orders, if you have configured 'Define New Route Determination By Delivery Type', then route redetermination takes place during delivery creation and finds the new route. So I would say don't bother about fixing the orders.
Just ensure you have configured these 2 items in IMG:
LE/Shipping/Basic Shipping Functions/Routes/Define New Route Determination By Delivery Type,
and
LE/Shipping/Basic Shipping Functions/Routes/Define Allowed Actual Route By Proposed Route.
That leaves open deliveries which are not PGIed to be taken care of.

Error in update program

Hello All,
we went to BI7.0 upgradation and iam getting the error in the update program message no rsau 484 when the process chain is trying to load the data into infocube and i have found SNOTE 1146851 MENTIONED by SAP according to which i deactivated update rule and reactivated again but still iam getting error .did any of you implemented this note please help me in this regard.
Thanks & Regards
Priya

Hi,
This is because transfer structure is not activate
try replicating the data source in rsds t-code and activate the transfer rules..
sometimes it works
Cheers,
Swapna.G

Error when generating the update program RSAU484

Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.

Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ?

Error when generating the update program

Hi BW Experts,
I am facing issue while loading data to cubes:
0TCT_C01 & 0TCT_C02
In load monitor (RSMO) -> details> some data pakages are going thru successfully while some are failing with error:
Error when generating the update program
Thanks

Hello,
Try activating both the cubes using RSDG_CUBE_ACTIVATE. Activate them even thou they seem active.
Also you can refer to OSS Notes:
Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update
Note 1152453 - Termination generating InfoCube write program
Regards,
Shashank

Error when generating update program

Hi,
I was loading transactional data in to Cube. The load had failed and in RSMO status tab is showing that Error when generating update program. could you please suggest me some one how to resolve it.
regards,
Neeraja
null

Hi,
Actually when you are loading data, the update program is executed. It is generated while you create the update rules for your data target. Please check whether the update rules are active or just go to the update rules and activate it again. Try loading data after activation and let us know the results.
With Regards

BW Statistics-BI7-Error when generating the update program

Dear All,
We faced the below problem in while executing the infopackages for BW statistics in BI7.0
7099 records from 7099 records..but shows request is red.
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Update rules ( 7089 -> 0 Records ) : Errors occurred (RED)
Update rules ( 7089 -> 0 Records ) : Errors occurred
InfoCube 0TCT_C23 will be updated
Error when generating the update program (RED)
Is there any notes to apply for this?
Initilaztion is executed with out any errors!!
Regards

Hi
Caller 01 : If there is any inconsistecy while loading the data or if the program cannot able to execute a specific task it will give the caller errors.
check in the transaction ST22
check for the OSS notes 631668, 860475
Check the below links which have a discussion on the same problem.
A caller 01, 02 or equal to or greater than 20 contains an error meesage
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
ERROR?
Data load System error
Hope this will help
Regards
Shilpa

Error when generating the update program::::ID RSAU No. 484****

Helllo,
While Infopackage loading for DS 2LIS_04_P_COMP following error is coming.. please see if anyone may face such kind of error.
***Error when generating the update program::::ID RSAU No. 484***
Diagnosis
     An error occurred during program generation for InfoSource
     2LIS_04_P_COMP and InfoProvider ZISPP_C01 . This may be extrapolated to
     incorrect update rules.
Procedure
     Check and correct your update rules and then generate the update program
     again. You can find help on the error in the error log.
amit shetye

hi,
Do a check on the update rules and see if it returns no errors...
if that is the case, then check the short dump and try to get the program name for the update rules..In se38 putting the program name, you can go inside it and do a check there as well if there are any errors....
If in the end yo still dont find anything, try to delete and re-create the update rules..
But i think you will get quite useful info from the dumps if there are any..
hope this helps you..
regrds,
Jadeep

Sets of unknown string is displayed after flash update program

We have HP laserjet 1213nf MFP printer installed in network. But for some reason after updating HP flash update program related to the printer and after restarting the printer. We have came accross different error displayed on screen.Hence we are unable to reconffigure the printer as per our network settings.
below is the set of strings displayed in two line
1 set
IZMAT.IZEJMAT
TIEK IZMANTOTS
2nd set
PABEIGTS AUTOMAT.
09/05/12 03:23
Pls. help us resolve this issue.

What is the process name you see hanging?
Anyway, to avoid that use the offline installers
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Problem when updating programs...

when i try to update programs (itunes) everything works fine until i the program resets...then it goes to a blue screen and a bar appears with "initializing installation". However the bar does not move and my computer gets stuck..What can i do?

If you are indeed running Mac OS X 10.4 as your profile shows, you'll be more likely to get a quick and accurate answer if you ask in the Mac OS X 10.4 forum. 10.5 Leopard is sufficiently different that what works for 10.5 may not work for 10.4.
Regards.

06 28 update program not running

I downloaded and installed the latest update to my pc. I installed it and rebooted like requested. I tried running the update by 1. plugging in my ipod and it telling me there is an update to click button to run the update program
2. tried running it from my start menu
3. went to the physical directory of the exe file and dowble clicked it. nothing made the update program come up. it just simply does not run when you click it or use any of the methods said before.
Anyone else have this problem or know how to fix it?
PC Windows XP Pro XP

I did everything you mentioned including updating itunes and it just doesn't run, no matter how many times I click the icon the program does not start
I ran it yesterday with no problem (windows xp SP2).
things that you can try are:
Reset your ipod before conecting it to your
computer.
Start the update program before updating your ipod
did you also upgrade itunes?
Try those things and let us know how it goes.

KM/DB Update Program

Similar Messages

Maybe you are looking for