KM links not functioning through Webdav repository view

Hi All,
I have a somewhat complicated setup here which is causing some strange issues.
We have an EP instance and a BI portal instance setup. Currently we broadcast reports to our BI portal KM instance, and use ICE to replicate the data from BI portal KM to EP KM. This is not the desired end result.
According to SAP, the end result should consist of using a Webdav repository solution. When users hit the EP KM, specifically the content that is being replicated over currently, they would hit a Webdav repository which points to the BI portal KM, which has an identical KM folder structure. So far this works fine. The problem happens when we create links within the BI portal KM.
Near the root of the KM structure, we have the main content. We link back to this main content with different permissions on each link. This is done for business reasons.
When I try to access this linked content from the BI portal KM it works fine. From the EP KM it throws a HTTP 403 not authorized error. I have tried opening up the permissions to everyone on both KM's with no success. When I access the content directly (ie not linked) it works fine (same permissions). Any ideas why the linked content through a webdav repository would throw HTTP 403 errors?
Kind Regards,
Richard
Edit: I should add that we are currently using EP 7.0 EHP1 SP3 highest current patch level and BI 7.0 EHP1 SP3 highest current patch level.
Edited by: Richard de Gonzague on May 5, 2009 4:33 PM

Hi,
I have a similar requirement where in we need to integrate CRM Content Management with SAP KM.Can you please let me know -
1. How do I connect it using the Web Dav repository manager. Can you point me to the document.
2. If you were to resolve the error that is mentioned below. I will have a similar requirement once the WebDav repository manager is configured.
Thanks,
Vivek

Similar Messages

Crystal Reports XI R2 SP4 Dynamic Image link not shown through forward prox

Hello,
I've installed crystal reports XI R2 on a server which accesses the internet through a forward proxy. I've created a sample report with a dynamic image link. When I preview the report, the image shows up blank. I am able to browse to the image using IE.
Further, using the same report on our lan machine (no proxy), works fine. Any help you can provide is appreciated.
Regards,
Sujee

Hi,
It seems that Crystal Reports does not support accessing images through a proxy configuration.
Hope this helps.

XMP Metadata Linking Not Functioning, PPro CS6 v6.0.5

Hi,
In the past I've been successful adding and storing metadata to the 'Description' column in the project window in the past with the 'Link' symbol activated in the Metadata panel under 'ile'>Dublin Core>>Description. This would allow me to retain the description metadata when the media is imported into a different project.
However I am using this same procedure this week, but the data does not seem to be saving/adding to the XMP 'File' metadata. See screen shot below. I've experienced this problem within different proejcts and with the three main media types in our production house: XDCAM EX, P2 MXF and Ikegami MXF.
Any thoughts why this would work previously, but not now? Is it related to the latest version updates?
This is a PC, Windows 7 system.
Thanks!

My take is that this is not a linking problem, per se. Rather, it looks like the problem is that the File section shows that the file is not editable.
So I'd investigate what's making Premiere think it can't revise the XMP. Could be that the files are read-only, that you don't have permissions to edit content in the parent folder, or that another program has the files locked. At least those are the most likely causes I can think of...

Hyperion Planning form change not flowing through to Smart View

Hyperion Planning 11.1.2 and Smaer View 11.1.2.
I have a user that installed SV yesterday but has been using planning for years. I made a change on his planning form (just added an account) and he does not see this change in smart view. However, he does see the change when logged into Hyperion Planning in his form.
One strange thing about this is the change shows for all hierarchies except for ones that he has loaded data to. So, for a hierarchy that has no data, it shows the form in SV how it is in planning. If he loads data to the hier, the form automatically switches back to how it was before the change, even when the planning form itself hasn't been changed.
Here is what we have tried:
Rebooted machine
removed user security completely from plannng and added back
checked for ghost instance in task manager or excel
Opened new Workbook and opened form fresh
remvoed connection, closed excel and all instances, new connection and open form fro mblank slate
Nothing seems to be working. And I see the form how it is in planning. HE does not, he sees it the "old way" and ony for hier points that have data submitted to them. So, literally switches the view based on the POV.
Any help would be greatly appreciated.
Edited by: kplum12 on Jun 15, 2012 11:48 AM

Hi,
Sounds like in the smart list set up you set "#Missing Data Form Label:" to "Data Form Setting" change it to "Drop Down Setting" and it should be alright.
Cheers
John
http://john-goodwin.blogspot.com/

Windows links not functioning

Hi
I am piloting the use of a mac on my companies windows network.
I have managed to mount the windows drives and can access all files as required. In general I have enjoyed the transition and love OSX.
The only thing that I have no clue how to get working is links to network locations in emails. If I click on an embedded link I get an error such as "The file ///filer1/shared/Engineering/Admin/New building planning/Building manual/published could not be found."
The drive referenced is mounted on my machine and I can access the file in Finder but not directly from the link.
Can anyone suggest how to make the links work?
Thanks
Guy

The link you received uses the old Windows (before the public Internet) network path format. Originally, you'd refer to files on Windows servers using the format
\SERVERPathToShare
Since most network file servers at the time used '/' instead of '\' as a path separator, Windows eventually accepted this as an alternative:
//SERVER/Path/To/Share
Then, the web came along and introduced the URL and URI. This used '/' as the file separator and introduced the protocol prefix and ':'. So, paths to files on Windows-type servers became:
smb://SERVER/Path/To/Share
... and since Microsoft wanted to appear Internet savvy, they renamed SMB to CIFS (despite the protocol no routing across the internets), so we eventually ended up with the synonymous
cifs://SERVER/Path/To/Share
Anyway... They are using the old Windows-style links whereas OS X (and other operating systems) use the newer URI link format. You can ask them to use the URI / Internet-style links, or you can cut and paste the link into Finder's "Connect to Server..." dialog and preprend 'smb:' to it.

Sharepoint 2010 Approval Workflow "Open this task" link not functioning

When I am clicking on "Open this task" link in outlook 2010 i am getting error as "Access to the floowing form required". Please help me out to resolve the issue..
Thanks,
Basavaiah

Unfortunately the regedit ActiveX Compatibility GUID wasn't present so I couldn't delete it. I kept searching and tried this:
Follow these steps:
a. Open Internet Explorer.
b. Click “Tools” and “Internet Options.”
c. Click the “Advanced” tab.
d. Scroll down to “Security.”
e. Un-check “Do not save encrypted pages to disk.”
f. Click “Apply” and “OK.”
Restart Internet Explorer and verify if the issue persists.
Pasted from
http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/i-cannot-download-files-in-internet-explorer-9/94903994-3888-49bd-b6a0-3cc3d5d7bfa3
Not sure why but if I uncheck the box it works and rechecking breaks it. Perhaps IE downloads the files on behalf of Outlook and Word, but Outlook can't get to them if the files aren't saved in cache by IE. Our SharePoint site is secured
by an SSL/TLS certificate.

WLP Ajax Struts Portlet Links not function correctly after refresh

Hi All,
I hope this hasn't being answered yet but i couldn't find any previous post on this, let me describe the environment.
Im working in WLP 10.3.2 Struts Portlet, i had enable:
Enable Tree Optimization:     True
Enable ScrollToWindow:     True
Asynchronous Update Mode:     Desktop
Enable DISC:     True
Enable DVT:     True
During the first request when i entered the (portal url in the browser) all the html:link get replaced with their corresponding: href="javascript:bea.wlp.disc.xie._Service.update('myTargetURL','','')"
Which is Fine, if you click on it the request will go thru an AJAX submit, however the incoming page also have links on it (navigation link to going back or to apply something else) and those get render as regular link making the whole portal to refresh.
ps:
Im using the corresponding BEA Stuts-html instead of struts default
<%@ taglib uri="http://bea.com/struts/adapter/tags-html" prefix="html"%>
Thanks
Edited by: forzaken on Sep 28, 2010 12:18 PM
Edited by: forzaken on Sep 28, 2010 12:18 PM
Edited by: forzaken on Sep 28, 2010 12:18 PM

Problem is here
:str_name := 'Ongeldig klantnummer';it should be
str_name := 'Ongeldig klantnummer';":" is regarded as a page item.
Gary

Equium A100 - s video link has not functioned

Dear Forum Members
I have an Equium A100 running Vista (home edition).
In the past I have happily had my PC linked to a TV using an S video lead to view TV programmes, dvds etc.
However recently my computer had to be reset to the original factory settings and since that time the s video link has not functioned - the PC wallpaper shows on the TV but nothing else.
I have loaded what I hope are the appropriate latest drivers (perhaps source of problem) and the display settings appear to be correct.
Any help with this problem would be greatly appreciated.
Ron

>... the PC wallpaper shows on the TV but nothing else.
This happen when option Extend the desktop onto this monitor is enabled.
Please enter display settings/properties and be sure this option is disabled.

Accessing function through DB link, giving error.

Hi All,
I am using Oracle 10g. I am having a function which is being called in a 'Select' query. And with in the function i have done exception handling, in which in case of exception, i am inserting the records into one table and its is 'pragma automnomous'. So its working fine , when i called this function through the 'Select' query from my own DB. but when i called the function from another DB through DB link, its giving me error stating , DML is not possible in function.
can you please suggest some other alternatives or hoe to handle this situation?

930254 wrote:
Hi All,
I am using Oracle 10g. I am having a function which is being called in a 'Select' query. And with in the function i have done exception handling, in which in case of exception, i am inserting the records into one table and its is 'pragma automnomous'. So its working fine , when i called this function through the 'Select' query from my own DB. but when i called the function from another DB through DB link, its giving me error stating , DML is not possible in function.
can you please suggest some other alternatives or hoe to handle this situation?You have tables. We don't.
You have data. We don't.
You have code. We don't.
You have error. We don't.
You have mystery. We have no clues.
You're On Your Own (YOYO!)

Problem while uploading text file through portal into WebDAV repository .

Hi all...
I am not able to upload any file through portal onto my webDav repository for remote server however reverse is possible i.e. any document created at remote server is reflected in portal.
Everytime when i try to upload file though portal , i get the following error::
The item could not be created because an exception occurred in the framework.
Kindly suggest what to do....
ThankS

Hi Chetna,
Have you specified any user information in the webdav repository....Like always connect through this user, in the webdav repsository tab....This user may not have write permission in the windows.
Also are you sure that the user you logged in portal by which you failed to create new files or folders and the user that was able to create file in the windows are one and the same.....
Regards,
Ganesh N

My iPod Touch will not play through external speakers when it is docked. It only plays through it's internal speaker. All the other functions on the iPod can be controlled by the external speakers (volume,track, etc). How do I fix this?

My iPod Touch will not play through external speakers when it is docked. It only plays through it's internal speaker. All the other functions on the iPod can be controlled by the external speakers (volume,track, etc). How do I fix this?

I would try in oreder:
- Resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restoring the iPod via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod.

In SharePoinr 2013. Unsupported Reporting Services Functionality The feature: "Power View" is not supported in this edition of Reporting Services.

Hi,
I am getting the below error which click "Create Power View Report" option in "Power Pivot Gallery"
Unsupported Reporting Services Functionality
The feature: "Power View" is not supported in this edition of Reporting Services.
I have uploaded "Power Pivot" excel file in "Power Pivot Gallery".
It is frustrating like anything. Can anyone help on it.
SharePoint 2013. SQL Server 2012. I have enable all the service applications success in CA.
Thanks in Advance.
Poomani Sankaran

Hi,
Please try to download the SP1 Edition of the rsSharePoint.msi
file and install it. You have to install the SP1 edition of RS if you are using SP 2013.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/2d2ecfae-b524-43f3-bf93-0bddfe904b75/the-feature-power-view-is-not-supported-in-this-edition-of-reporting-services?forum=sharepointadmin
Best Regards
Dennis Guo
TechNet Community Support

Links to discussion in a discussion board does not work from a Custom View

Hi,
I need to limit the number of Items shown in a discussion board the the 3 latest discussions.
The solution to do this is to created a new few where I set the item limit.
.. or so I thought.
The view shows only the 3 newest items however the link to the discussions are not working. If I change the view back to the normal "Subject/AllItems.aspx" view it works fine.
Anyone has a solution for this? hovering over the title link with the mouse I can verify that the links are different.
With the standard subject view where it works:
Home.aspx?RootFolder=%2Fsites%2Ftestsite%2FLists%2Ftest%20discussion%20board%2Ftest%203%202820&FolderCTID=0x012002000DF957D933C11F498845E0406B80727A&View=%7BF54786F4%2D10EB%2D4DB1%2DA686%2D7743DD17635A%7D
With my custom view where nothing happens when I click the link:
Home.aspx?RootFolder=&FolderCTID=&View=%7BF54786F4%2D10EB%2D4DB1%2DA686%2D7743DD17635A%7D
Thank you

check this post
http://social.technet.microsoft.com/Forums/sharepoint/en-US/9fc02732-3124-4c41-b7ce-ae26f6c3c00d/how-to-limit-the-discussion-board-webpart-to-show-only-10-discussions?forum=sharepointgenerallegacy
Another article
http://technet.microsoft.com/en-us/library/cc768269.aspx

I believe my firefox is viewing some websites on my laptop in formats that are used for cellular devices. Sites like facebook, sports illustrated, yahoo are not functioning correctly but certain sites work fine.

sits such as facebook, yahoo, and sports illustrated do not function correctly on firefox but they do on my internet explorer. I believes its somehow set itself into the same format used for cellular devices... My JSU.edu page says somethin about it being in (portal mode). It is also a different format now that normal.

Hi @TheBigGiggle ,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY TouchSmart 17 Notebook PC and a keys not functioning correctly. Here is a document on cleaning the keyboard.
I would start with air on the keys as sometimes debris can cause this issue.
Here is a link to uninstall the keyboard. In the device manager have you uninstall all that is listed in keyboards, restart the computer after uninstalling, it should reinstall automatically and resolve any issues with the keyboard.
Here is a link to keyboard troubleshooting.
Here is a fix from Microsoft that might help.
Let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Autofill function is not working, 'window' sticks through it not functional!

autofill function is not working, 'window' sticks through it not functional!

Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
1. Quit and relaunch Safari.
2. Select your card in Contacts. Then select
Card ▹ Make This My Card
from the menu bar. Also select
Contacts ▹ Preferences ▹ vCard
and uncheck the box marked
Enable private me card
if it's checked.
3. In Safari, select
Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
If the box was already checked, uncheck it and then check it again.
4. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

KM links not functioning through Webdav repository view

Similar Messages

Maybe you are looking for