KM Scheduler not working

Hi all,
               I have created a KM Scheduler and have also set the time table to it , but never runs at the scheduled time. And when I deploy from NWDS , I get the following errors.
com.sap.portal.plugins.ConfigFrameworkArchiver > No privateArchive.properties file is defined.
[25.06.10 / 19:21] #ERROR LEVEL# com.sap.portal.plugins.ConfigFrameworkArchiver > Missing file plugin.header.properties in /KMScheduler/src.config/install/meta/expanded/cm/services/schedulertasks
[25.06.10 / 19:21] #ERROR LEVEL# com.sap.portal.plugins.ConfigFrameworkArchiver > Config archive successfully created (time to export 750 ms)
Is it because of the above errors that the Scheduler is not working? How can I rectify the above errors?

Hi,
Have you assigned a CM system to the Scheduler, if already assigned, try assigning a different node if available. Also check whether there are any errors at the scheduled time when the scheduler is supposed to run.
Also try uploading the par through support and see whether the error is coming.
Regards,
Vinod

Similar Messages

  • MRS (Multi resoource scheduling) not working properly

    Hello All,
    We have MRS 610  installed in our landscape. We have configured it to integrate with Maintenance orders. We are facing an issue as to not all orders are reflected in the planning board though we make exact replica of orders which already exists in the planning board. Those orders which are there in the planning board doesnot reflect the changes that are done to it in PM module. I have checked all the demand related configuration settings and all seems to be fine. The inegration between PM and MRS is not working properly. Orders are getting pulled into the planning board if we run the report /MRSS/SGE_DEM_DATA_MIGRATION.
    We recently upgraded to SP4 level. Kindly help me to trouble shoot this issue.
    Many thanks in advance.
    Boby

    Dear Bob
    As far as I have understood that your problem is that the backward integration is not happening.
    That means whenever you are assigning a resource to the PM Order these alocation are not reflected in PM Order. Just check following points.
    1. Check weather you have activated back integration of PM or not !
    2. Check this under the node: Sources of Demands->Orders-> Control integration of PM/CS Orders
    3. Also make sure that you have activated back integration of demand type R3OR in the node Sources of demand.
    4. Check PM Settings related to Work centre
    5. Apply the Note 1135513 - MRS: Changes to standard for PM/CS
    integration
    Also please go through the Documentation supplied with the sofware Installation CD for MRS.
    It gives step by step activities how to proced with config.you will have to go through this documentation very thoroughly as all information is avalable .
    Also check this link
    http://help.sap.com/bp_serv603/ServInd_DE/html/index.htm
    This link gives  best practices for services industry.
    Go To Business Information > Preconfigured Scenarios > (Right hand side )>SAP ERP Scope >Scenarios - by Business Areas>Project Resource Management >Service Order with Resource Scheduling (MRS).
    This will serve you as guidance for configuration.
    With regards
    Mangesh

  • Scheduling not working in InfoView for printing or email

    I recently upgraded from Crystal Report Server XI R1 to Crystal Report Server 2008. My schedules for reports were lost. I rescheduled some using infoview. They ran as scheduled but would not print or email. I had to reschedule them using CMC. They then worked. Is there a configuration setting to allow scheduling to work in info view? Is this a security issue. I was logged on to infoview as admin.

    You may want to check the job server settings to ensure that Email is an authorized output.

  • Mail Scheduling not working

    Hallo,
    Das Mail-Scheduling bzw. jeglicher anderer Mail Versand funktioniert nicht! Ich bekomme entweder Fehler oder eine Success Message, eine Mail kommt aber NIE an.
    -Selbiges funktioniert unter BO3.1 nach wie vor, es geht nur unter BO40 nicht.
    -Die Destination des AdaptiveJobServers wurde gleich eingerichtet wie unter BO31.
    -Telnet vom BO40 Server auf den SMTP Server funktioniert einwandfrei.
    Hier die unterschiedlichen Szenarien:
    *Scheduling eines WebI Reports OHNE Daten dahinter (nur Header und Footer)
    1) Mit Email Notification (jegliches Format):
    address error. [Fehler beim Senden von Adresse(n) an SMTP-Server. Rückgabecode: . Ursache: [].]: CrystalEnterprise.Smtp
    2) Ohne Email Notification (jegliches Format):
    Error c3_core_error_de_504
    *Scheduling eines WebI Reports mit SAP Daten dahinter
    1)Mit Email Notification (jegliches Format):
    Wie oben
    2)Ohne Email Notification (Format Webi/pdf)
    Success u2013 MAIL KOMMT ABER NIE AN!
    Hat jemand das selbe Problem bzw. eine Lösung?
    Danke,
    Beste Grüße,
    Heike Baumann

    Oh sorry!!! I mix it all the time.
    So once again in english:
    Mail scheduling is not working in our BO4.0 environment. (in general no mail send is working at all)
    I get error message or succes, but in both cases I do not receive a mail.
    - I did the same in 3.1, there everything is working fine. (with the same infrastructure (firewall, smtp server etc)
    - The "destination" settings are the same in 3.1 and 4.0
    - TELNET from the BO40 server to the SMTP server is working fine as well
    There are my scenarios during mail scheduling:
    Scheduling of a WebI report WITHOUT ANY data behind (just a text header an footer)
    1) Scheduling WITH Email Notification (any format)
    address error. [Fehler beim Senden von Adresse(n) an SMTP-Server. Rückgabecode: http://SMTP 530 - Authentifizierung erforderlich.. Ursache: http://].: http://CrystalEnterprise.Smtp
    (sorry for that, I am logged in in english, but BO is also mixing languages
    It says something like:
    address error. Error during sending of addresses to smtp server. Return code: http://SMTP 530 - Authentication neccessary.. reason: http://<mailaddress>.: http://CrystalEnterprise.Smtp
    (--> my network/ smtp expert told me, that we have no authentication. It is also working in 3.1 without)
    2) Scheduling WITHOUT Notification (any format)
    Error c3_core_error_de_504
    Scheduling of a Webi Report WITH SAT data behind
    1) Scheduling WITH Email Notification (any format)
    as above
    2) Scheduling WITHOUT Notification (any format)
    success - but I never get a mail!
    Thanks a lot,
    best regards,
    Heike

  • Scheduler Not Work

    Hi all,
    i want some help with scheduler, the case is:
    the database installed first time when the database locale in normal calendar,
    the server is in hijri ,
    when i create any job schedule dont work when next run comes,
    please help

    loool,
    thank for help :) ,
    version=11.2
    Every thing goes fine except one thing which is , why the job do not run automatically next time that specified in the create statement, i tried to find any error but i cant find one,
    look when i use the Toad and click on "run job" the job run without any error,
    "why the job do not run automatically"
    i create the same job in another database in separate machine it work automatically, but the difference is that i do not use hijrah Calendar which i have to use it in the main database;
    thank you

  • Device removal schedule not works?

    Dear all,
    I have been set to remove a device with it has not made contact after 30 days, but it is not working. The device still in management zone even the device not contact over this period.
    I am sure I only have the default system setting and no other override settings in the zone folder.
    Please help.

    manng228,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Bachground job scheduling not working

    Hi friends,
    I wrote a program where it will fetch the details of production and the final report will generate a csv text file.
    The program works fine when it is manually executed in se38. But when I schedule the job as a background job then I get the status as waiting where I can see the output of the program in the spool but the only problem is that it is not generating the txt file.
    May be the problem is with configuring the printer settings.
    Please help me in solving this issue.
    Thanks,
    kiran

    Hi Kiran,
    If you are using function module GUI_DOWNLOAD in your program, won't support in Background to generate file, it will work only in Front end.
    If Useful reward points.
    Regards,
    Sunil

  • Do not disturb scheduling not working

    for the past few days my iphone 5's do not disturb schedule hasn't been working properly. also this morning my phone would not respond although i never shut it off.  a hard restart using the home and lock buttons fixed but this is a little concering for a brand new phone. any ideas if these issues are related?

    e're aware of that. It's a bug. Apple has already publicly stated that the problem with DND will resolve itself on 7 January.

  • Scheduler not worked for ONE DAY

    Hi all,
    I have a Publisher Report which is Scheduled Everyday. It is working fine from the last couple of months.
    But last Friday, it got failed. I am unable to get the reason why it failed to RUN?
    I got the error message :
    System Message oracle.apps.xdo.servlet.scheduler.ProcessingException: Job execution failed because the user who scheduled this job has no more permission or priviledge to run the job. [REPORT_URL]=[RightSource Reports/Associate Productivity/Orders Out By Associate/Orders Out By Associate.xdo], [USERNAME]=[rxb0845]
         at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:356)
         at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
         at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
    I just want to know, if it was working fine then why did I get the failure on that particular day?
    It happened for that day only.... It is now working fine...
    Our Client wants explanation on this....
    Could anybody help me out?
    Please let me know the root cause....
    Thank you
    Gajanand Vadapalli

    Is BI Pub using the BI Server security model?
    Can you check the BI Server log and see if any of the BI services went down that day?
    I'm speculating, but maybe the BI Pub scheduler tried to execute a job while the BI server was down and therefore could not do an authentication of the user who scheduled the report. I don't know if the BI Pub scheduler attempts to do this or not. And, this would only be a possibility if BI Pub is using the BI Server security model.

  • KM Scheduler not working EPh1 version

    Hi all,
           I have written a scheduler which uses EJB. This works fine in 7.0 SP14 version but it stops working in EPh1 version. It throws an error(from logs) Exception in operation startApp with application  sap.com/ear~file.   sap.com/ear~file is an ear file with EJB.
    Did any one had this issue? how to resolve it. Pls help.
    Thanks,

    This looks like a issue with classloader and the version of the J2EE.
    Use this below code and try.
    ClassLoader originalContextClassLoader = Thread.currentThread().getContextClassLoader();                                   
    try {
              Thread.currentThread().setContextClassLoader(this.getClass().getClassLoader());
              Context initial = new InitialContext();
              Object objref = initial.lookup("JNDI Name Of the Session Bean");
              Object obj = PortableRemoteObject.narrow(objref, BeanHome.class);
         } catch (NamingException ex) {
              ex.printStackTrace();          
         } catch (Exception ex) {
              ex.printStackTrace();          
         finally {
         Thread.currentThread().setContextClassLoader(originalContextClassLoader);

  • KM scheduler not working in EPh1 Version

    Hi all,
    I have written a scheduler which uses EJB. This works fine in 7.0 SP14 version but it stops working in EPh1 version. It throws an error(from logs) Exception in operation startApp with application sap.com/earfile. sap.com/earfile is an ear file with EJB.
    Did any one had this issue? how to resolve it. Pls help.
    Thanks,

    This looks like a issue with classloader and the version of the J2EE.
    Use this below code and try.
    ClassLoader originalContextClassLoader = Thread.currentThread().getContextClassLoader();                                   
    try {
              Thread.currentThread().setContextClassLoader(this.getClass().getClassLoader());
              Context initial = new InitialContext();
              Object objref = initial.lookup("JNDI Name Of the Session Bean");
              Object obj = PortableRemoteObject.narrow(objref, BeanHome.class);
         } catch (NamingException ex) {
              ex.printStackTrace();          
         } catch (Exception ex) {
              ex.printStackTrace();          
         finally {
         Thread.currentThread().setContextClassLoader(originalContextClassLoader);

  • Energy saver schedule not working, can't set the time!

    Hi, I was trying to schedule a shutdown today, only to find that it doesn't work, I can't select the time or input it, it only shows AM and PM, but no time! I can't input numbers in that box! I can delete AM or PM, but that's about it!
    Does anyone have a clue on what's going on?
    Here is a screen pic of the problem: http://img709.imageshack.us/i/screenshot20110127at403.png/
    Message was edited by: pablovi77
    Message was edited by: pablovi77

    Hmm. Very strange.
    Does the date & time appear normally in your menubar, and on Finder windows, etc.?
    It doesn't sound like a file system or permissions problem, but you might try Verifying your internal HD, per #6 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html] (or use the link in *User Tips* at the top of this forum).
    Then +*Repair Disk Permissions+* on it, per #5 there.

  • Online DVR scheduling not working

    Has anyone had any success using the Verizon mobile website or the regular desktop website to schedule programs to record on your DVR?  I've tried a numerous times on different occasions and there is always an error.
    At this point I'm wondering why the option is even on the website.

    This is a common issue.   Call tech support or open a chat session and tell them that when you try to use the website to schedule a DVR program that it gives you an error and tell them the error.   They'll access your router and tweak a few port forwarding settings which will enable it to work properly (the settings for some reason don't automatically appear or get out of sync with the addresses actually assigned to the DVR and when that happens the scheduler doesn't work).   This most often happens the first time you try to use the service or after an extended power outage.
    Fortunately it only takes them a few minutes of online chat to sort it out.
    I just went thru this a week or so ago when I added a second DVR -- it was inaccessible from the website until I called and had them fix the router settings.

  • Backward scheduling not working

    Hi Gurus,
    I have maintained the Backward scheduling for a new order type  as per below in OPU3
    in detailed scheduling tab I have ticked the scheduling indicator also generate capacity requirements
    in Adjust scheduling tab I  have selected Adjust basic dates,adjust dep. reqmts to operation date.
    in scheduling type selected backward scheduling also ticked the indicator Automatic Scheduling and Automatic log
    In reduction tab maintained All operations in the order will be reduced and in Max.reduction level maintained Do not reduce.
    After that I am  creating an order by entering today's date as end date .The start date also showing today's date instead of  back date
    Please suggest if anything missed
    Aravind

    Hi Aravind,
    Do you mean you want to allow the order to start in the past? If yes, then you need to fill some numbers in "Start in the Past" field in OPU3 as follow:
    It's the number of days in which you allow the order to start in the past.
    Regards,
    Julian

  • Weblogic job scheduler not works in cluster

    I have configured a cluster with two managed servers. I have configured a datasource for job scheduler for this cluster
    if I shut down one server job does not start on other server of cluster.
    manged server logs give below exception
    Exception in thread "Thread-211" java.lang.NullPointerException
         at com.mysql.jdbc.Statement$1.run(Statement.java:96)
    If I remove the option 'datasource for job scheduler' in Clsuter->MyServer->scheduling , this exception goes.
    job scheduler table weblogic_timers also remains empty.
    I feel that there is some issue with the schema of weblogic_timers. How can I see something in log to know what is the issue.
    Please help I am struggling from a week.

    I have configured a cluster with two managed servers. I have configured a datasource for job scheduler for this cluster
    if I shut down one server job does not start on other server of cluster.
    manged server logs give below exception
    Exception in thread "Thread-211" java.lang.NullPointerException
         at com.mysql.jdbc.Statement$1.run(Statement.java:96)
    If I remove the option 'datasource for job scheduler' in Clsuter->MyServer->scheduling , this exception goes.
    job scheduler table weblogic_timers also remains empty.
    I feel that there is some issue with the schema of weblogic_timers. How can I see something in log to know what is the issue.
    Please help I am struggling from a week.

Maybe you are looking for