KM Scheduler Task not running

Hello All,
I have created a scheduler task for the , for the same I have created a PAR file , have successfully Build the project and deployed , Have configured the time in the Global services . But for some reason I could not see the task being running in the "Component Monitor" (when I select the Services-->scheduler >select one of the CM systems (have two currently)>click on on the CM system ) I could not see my custom task .
As well as When I go to "Service configuration" --> Portal Application , there also I could not see my custome application .
Initially whenever there use to be any error (for example -- CM systems not assigned etc etc ).
Is it something I am missing while deployement , Or has it being deployed properly?
Regards,
Ronniee

Hello Detlev,
Any Inputs on this please.
I have opened a new thread but a different Query
http://forums.sdn.sap.com/thread.jspa?threadID=2155357
Regards,
Ronniee.

Similar Messages

Server 2012 Scheduled tasks not running after DST

Since the DST change this weekend the weekly scheduled tasks on our 2012 standard server are not running. The schedule show the correct next run time, but the task never runs. The server correctly adjusted for the DST changes (We are in CST in
the US) and if you look in the date time it notified us that the clock was set forward.
Any ideas?

Hi Mark,
Before going further, would you please let me confirm whether only weekly scheduled tasks t run? In other words,
did some daily scheduled tasks run smoothly?
Based on current situation, please create a new weekly
scheduled task and check if encounters the same issue.
If this issue still persists. Please let me confirm if you make scheduled task run some commands or a script,
or others I misunderstand. For an example, if run a script, please directly run it in the Windows Server 2012 Standard and check if there any issue occurred.
Meanwhile, please open Task Scheduler, select this problematic weekly scheduled task, click General tab. Please
check which user account was used to run this task. And please check Run with highest privileges, then check if can solve this issue.
In addition, please check History tab in task Properties. Please pay attention on the time-point when the weekly
scheduled task should be ran, and check if you can find some events at that time-point. It may help us to go further analysis.
By the way, there is a similar thread. Please refer to.
Certain scheduled tasks do not run anymore after DST change
http://social.technet.microsoft.com/Forums/windowsserver/en-US/47483baf-e7af-4bff-9db4-9c3d0ead2b41/certain-scheduled-tasks-do-not-run-anymore-after-dst-change?forum=winserver8gen
Hope this helps.
Best regards,
Justin Gu

Scheduled Tasks wont run

I had recently upgarded to CF8 from CF7.
After the upgrade non of my Scheduled Tasks are running.
Even when i trigger the tasks manually from CFAdmin I get the response "This scheduled task was completed successfully."
But nothing really runs. My application is using Integrated Windows Authentication and the schedulled tasks were running fine with CF7.
Now when i switch off the Windows authentication, the scheduled tasks are working fine.
Could you please tell me why my Scheduled Tasks are not running when i turn on Windows authenticaton, where as it was working perfectly with CF7.

ColdFusion schedule tasks CAN NOT run under windows integrated authentication. ColdFusion is not a windows product, it does not pass the NTML headers with requests. You have to turn off windows integrated authentication for any resource you would like to run as a schedule task. Helpfully, you can set that permssion to individual files and|or folders so you do not need to turn it off for the entire site.
I don't know why this would change after an upgrade, unless you built a new CF8 server with a newly built IIS as well.

Windows 2003 server scheduled tasks not work properly. Please help.

I created a couple of windows shell scripting programs. When I call them from command line, it works well. Then I use Task Scheduler to schedule them to be run daily. The strange thing is: If I log into server and open Task Scheduler window. The scheduled tasks will run automatically and execute with result code 0x0. It works well. However, if I just set up Task Scheduler and log out of the server, the scheduled works will not run with result code 0x80. Here is the log info
"programname-parametername.job" (programname.cmd)
Started 1/28/2010 11:20:00 PM
"programname-parametername.job" (programname.cmd)
Finished 1/28/2010 11:20:00 PM
Result: The task completed with an exit code of (80).
I used windows adminstrator account, not system account to schedule the work. I changed scheduled work to be run by my admin account, not by system account. Please advise me where is the problem and how to fix it. Thanks in advance.

Hi Polarisws,
According to your description, I understand that your scheduled task did not run when the user is not logged in the system.
Please go to the services.msc and select the "task Scheduler" service, double-click it and go to "Log On" page, enable the option "allow service to interact with desktop" and test the result.
Regards,
Wilson JiaThis posting is provided "AS IS" with no warranties, and confers no rights.

Schedule tasks to run on wake up?

Is it possible to schedule tasks to run when a Mac wakes up (preferably Terminal/UNIX)?
I want to run a script when I open my laptop. Is that possible without installing further software?

You could use System Preferences -> Energy Saver -> Schedule to wake up the Mac (or at least try), then if you can have your tasks run in the background, you might be able to either use a repeating Calendar entry that runs an app, Applescript, or Automator app, or use a launchd.plist (launchd is non-trivial, but effective).
The key is to have tasks that do not need to be actually logged in at the time. That is to say, they do not need a GUI up and running.
Not sure that Dropbox works without being logged in, but there may be other ways to sync things between Macs without using Dropbox. Maybe something like bittorrentsync (I've only heard about it, but have not played with it).
As Chris CA suggests, so not shutdown your Macs, but maybe just sleep them with your account already logged in. Then when the scheduler wakes them you are already logged in. Then when the tasks you need to run complete, you can let the normal idle system sleep interval put them back to sleep (be sure to set the sleep interval to a long enough period to allow your tasks to complete).

OIM schedule task not working properly (error - MISFIRE_INSTRUCTION_RE....)

Hello,
we're doing trusted reconciliation from DB and it is implemented through a GTC connector (OIM 10g BP 15).
After we did a sync of OIM from prod to this environment, we're seeing issue using this related trusted recon scheduled job. Here is the error :
DEBUG,24 Jan 2012 15:09:12,321,[XELLERATE.SCHEDULER],Loading Scheduled task class com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,24 Jan 2012 15:09:12,321,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,24 Jan 2012 15:09:12,321,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],Class/Method: QuartzSchedulerImpl/getQuartzTrigger entered.
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],Creating Custom Trigger with StartTime 2012-01-24 with repeat interval of 21600000 secs
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],triggerFreq : CUSTOM
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],triggerImpl : Trigger 'DEFAULT.MYMDB_GTC': triggerClass: 'org.quartz.SimpleTrigger isVolatile: false calendar: 'null' misfireInstruction: 0
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],trigger Misfire instruction : MISFIRE_INSTRUCTION_RESCHEDULE_NEXT_WITH_EXISTING_COUNT
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],Class/Method: QuartzSchedulerImpl/getQuartzTrigger left.
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],MYMDB_GTC trigger is related to DEFAULT.MYMDB_GTC and new job is DEFAULT.MYMDB_GTC
DEBUG,24 Jan 2012 15:09:12,340,[XELLERATE.SCHEDULER],Scheduling task : MYMDB_GTC with trigger : Trigger 'DEFAULT.MYMDB_GTC': triggerClass: 'org.quartz.SimpleTrigger isVolatile: false calendar: 'null' misfireInstruction: 5
DEBUG,24 Jan 2012 15:09:12,392,[XELLERATE.SCHEDULER],Loading Scheduled task class com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,24 Jan 2012 15:09:12,392,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,24 Jan 2012 15:09:12,392,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG,24 Jan 2012 15:09:12,407,[XELLERATE.SCHEDULER],Class/Method: QuartzSchedulerImpl/updateXellerateForTrigger entered.
DEBUG,24 Jan 2012 15:09:12,407,[XELLERATE.SCHEDULER],Updating Trigger Details: lastStartTime : 2012-01-24 lastStopTime : Tue Jan 24 15:09:12 PST 2012 nextStartTime : 2012-01-24
DEBUG,24 Jan 2012 15:09:12,411,[XELLERATE.SCHEDULER],LefMethodDebug
DEBUG,24 Jan 2012 15:09:12,411,[XELLERATE.SCHEDULER],Class/Method: QuartzSchedulerImpl/updateScheduledTask left.
DEBUG,24 Jan 2012 15:09:14,035,[XELLERATE.SCHEDULER],Loading Scheduled task class com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,24 Jan 2012 15:09:14,035,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,24 Jan 2012 15:09:14,035,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG,24 Jan 2012 15:09:14,066,[XELLERATE.SCHEDULER],Loading Scheduled task class com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,24 Jan 2012 15:09:14,066,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,24 Jan 2012 15:09:14,066,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
INFO,24 Jan 2012 15:09:14,093,[XELLERATE.SERVER],Quartz Executing Scheduled task : MYMDB_GTC
DEBUG,24 Jan 2012 15:09:14,099,[XELLERATE.SCHEDULER],Class/Method: SchedulerUtil/eventPreInsert entered.
DEBUG,24 Jan 2012 15:09:14,099,[XELLERATE.SCHEDULER],Class/Method: SchedulerUtil/getSchedulerInstanc left.
DEBUG,24 Jan 2012 15:09:14,175,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,24 Jan 2012 15:09:14,175,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
Any idea what could be wrong here?
Thanks,

Hello,
I tried "Edit" the GTC connector and "SAVE" the connector back without doing any editing. I hope that will not cause any difference in the deployed corresponding GTC schedule task which used to work earlier.
Anyways, i also checked the trusted source database and populated some new values in there and tried reconciling again (incremental reconciliation configured). Surprisingly i see some new error in the logs. Is this because of the unnecessary "Edit" operation i performed ?
==========================================================================================================
ERROR,31 Jan 2012 16:22:49,269,[XELLERATE.GC.FRAMEWORKRECONCILIATION],Reconciliation Encountered error:
java.lang.IllegalArgumentException: Cannot format given Object as a Date
at java.text.DateFormat.format(DateFormat.java:281)
at java.text.Format.format(Format.java:140)
at com.thortech.xl.gc.impl.common.DBFacade.getStringFromSQLObject(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.retrieveRecord(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getRecord(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getTargetRecord(Unknown Source)
at com.thortech.xl.gc.impl.recon.DBReconTransportProvider.getFirstPage(Unknown Source)
at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)
DEBUG,31 Jan 2012 16:22:49,270,[XELLERATE.SCHEDULER.TASK],Class/Method: SchedulerBaseTask/setResult entered.
DEBUG,31 Jan 2012 16:22:49,270,[XELLERATE.SCHEDULER.TASK],Class/Method: SchedulerBaseTask/setResult left.
WARN,31 Jan 2012 16:22:49,270,[XELLERATE.GC.FRAMEWORKRECONCILIATION],Though Reconciliation Scheduled task has encountered an error, Reconciliation Transport providers have been "ended" smoothly. Any provider operation that occurs during that "end" or "clean-up" phase would have been executed e.g. Data archival. In case you want that data to be a part of next Reconciliation execution, restore it from Staging. Provider logs must be containing details about storage entities that would have been archived
DEBUG,31 Jan 2012 16:22:49,270,[XELLERATE.SCHEDULER.TASK],Class/Method: SchedulerBaseTask/run left.
========================================================================================

Creating scheduled task to run powershell script

Hi all,
been following this guide on how to create scheduled task to run a .ps1 script:
http://blogs.technet.com/b/heyscriptingguy/archive/2012/08/11/weekend-scripter-use-the-windows-task-scheduler-to-run-a-windows-powershell-script.aspx
When I manually run this task,in the history it says success, but it doesnt work.
The script should create a report and send me an e-mail.It works fine if i run it manually in Windows powershell or Powershell ISE.
I cannot see that a new report have been created either.
Anything im missing here?
Been using same account to run it manually and the one using in task scheduler.
thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Hi all,
been following this guide on how to create scheduled task to run a .ps1 script:
http://blogs.technet.com/b/heyscriptingguy/archive/2012/08/11/weekend-scripter-use-the-windows-task-scheduler-to-run-a-windows-powershell-script.aspx
When I manually run this task,in the history it says success, but it doesnt work.
Try executing the same command in cmd line, do you get a different result? or does that work as well?

Scheduled Task will run on Windows 7, but will not run on Server 2008 R2

So I have a scheduled task that uses nircmd to take a screenshot and then email it to a few company emails each night. With our old Exchange 2003 server, everything works prefectly on the 2008 R2 server (using SMTP). But since we upgraded to
Exchange 2010 it no longer seems to work (at least it never sends the email anymore).
What confuses me more is that this exact task (I exported it) runs perfectly fine on a Windows 7 Pro computer, even using the new Exchange 2010 SMTP address.
Both machines are logged in as the same user. I can even login as the domain administrator on each machine and still have the same issue. Only the Windows 7 Pro machine will successful run the task. To restate it, the Server 2008 R2 server
will run the task successfully if I use the old Exchange 2003 SMTP address.
Thanks for any advice!

Hi joshz451z,
Would you please let us know current situation of this issue? Did you refer to Dave's suggestion and check that relevant logs? If any update, please feel free to let us know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

KM Scheduler task not listed

Hello Experts.
I've made a simple custom KM Scheduler task, but am unable to see it under System Configuration -> cm -> global services -> Scheduler Tasks. I've trawled the forum for leads, read blogs but have been unable to resolve what should be a straightfoward issue.
I've used NWDS Wizard to create the project. Renamed the wrapper interface and class to avoid a conflict. Updated portalapp.xml to reflect this. Restarted portal twice, no luck.
Here's my portalapp.xml:
<?xml version="1.0" encoding="UTF-8"?>
<application>
     <application-config>
          <property name="SharingReference" value="usermanagement, knowledgemanagement, landscape, htmlb, exportalJCOclient, exportal"/>
     </application-config>
     <components/>
     <services>
          <service name="ArchiverService">
               <service-config>
                    <property name="className" value="com.sap.netweaver.rf.wrapper.RFServiceWrapperArchiver"/>
                    <property name="startup" value="true"/>
               </service-config>
          </service>
     </services>
</application>
RFServiceWrapperArchiver is the name of the wrapper class. In it, I set a key, expert.no.services.Archiver which corresponds to the class I have that implements ISchedulerTask. Nothing fancy in this class.
package expert.no.services;
import java.util.Properties;
import com.sap.netweaver.rf.wrapper.IRFServiceWrapperArchiver;
import com.sapportals.portal.prt.runtime.PortalRuntime;
import com.sapportals.portal.prt.service.IServiceProfile;
import com.sapportals.wcm.service.scheduler.ISchedulerTask;
public class Archiver implements ISchedulerTask {
     private String Channel_Root = "";
     private com.sapportals.portal.prt.logger.ILogger logger = com.sapportals.portal.prt.runtime.PortalRuntime.getLogger();
     //public Archiver(){}
     public Archiver() {
     super();
     public void run(String id, Properties properties) {
          // implement the tasks to be scheduled
          logger.severe("expert.no.services.Archiver","Archiver has been started");
     private void getServiceProperties() {
          IServiceProfile serviceProfile = PortalRuntime.getRuntimeResources().getService(IRFServiceWrapperArchiver.KEY).getContext().getServiceProfile();
          Channel_Root = serviceProfile.getProperty("Channel_Root");
          logger.severe("expert.no.services.Archiver","Channel root is: "+Channel_Root);
          //serviceProfile.setProperty(key, value);
          //serviceProfile.store();
I have checked for the presence of the co.xml and cc.xml and everything is fine there as well
Edited by: Claus Lisberg on Aug 12, 2009 9:31 AM

Problem solved. For some reason the configarchive.properties file was not added to the NWDI project. Did an Export and this prompted me to add it.
I now get an message that this has an invalid name, but at least I have something to work with.

How can I setup a scheduled task to run a Powershell Script delivered as a Group Policy Preference

I have a Powershell script I want to run only once when a user logs onto their system. This script would move all the PST files from the Local drive and the Home drive to a folder location within the users profile. I wanted to run this as a Windows 7 Scheduled Task using Group Policy Preferences. How can I get this to happen short of a logon script? I have updated all the machines to WMF 4.0 so could I use a Scheduled Job instead? I wanted to run the script as the logon user but elevated.#Start Outlook and Disconnect attached PST files.
$Outlook = New-Object -ComObject Outlook.Application
$namespace = $outlook.getnamespace("MAPI")
$folder = $namespace.GetDefaultFolder("olFolderInbox")
$explorer = $folder.GetExplorer()
$explorer.Display()
$myArray= @()
$outlook.Session.Stores | where{ ($_.FilePath -like'*.PST') } | foreach{[array]$myArray+= $_.FilePath}
for
($x=0;$x-le$myArray.length-1;$x++)
$PSTPath= $myArray[$x]
$PST= $namespace.Stores | ?{$_.FilePath -like$PSTPath}
$PSTRoot= $PST.GetRootFolder() #Get Root Folder name of PST
$PSTFolder= $Namespace.Folders.Item($PSTRoot.Name) #Bind to PST for disconnection
$Namespace.GetType().InvokeMember('RemoveStore',[System.Reflection.BindingFlags]::InvokeMethod,$null,$Namespace,($PSTFolder)) #Disconnect .PST
#Move All PST files to the default location while deleting the PST files from their original location.
$SourceList = ("$env:SystemDrive", "$env:HOMEDRIVE")
$Destination = ("$env:USERPROFILE\MyOutlookFiles")
(Get-ChildItem -Path $SourceList -Recurse -Filter *.PST) | Move-Item -Destination $Destination
#Attach all PST files from the default location.
Add-type -assembly "Microsoft.Office.Interop.Outlook" | out-null
$outlook = new-object -comobject outlook.application
$namespace = $outlook.GetNameSpace("MAPI")
dir “$env:USERPROFILE\MyOutlookFiles\*.pst” | % { $namespace.AddStore($_.FullName) }

Mike,
I do not understand what appears to be a regular expression above. I did add the PowerShell script to the HKCU RunOnce Key as suggested.
Windows Registry Editor Version 5.00
C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe -noprofile -sta -WindowStyle Hidden -ExecutionPolicy RemoteSigned -File "C:\scripts\Windows PowerShell\Move-PST.ps1"
I'm delivering this using Group Policy Preferences. It seems to fail or time out when run because the behavior is different if I run the script from within the PowerShell IDE. I added the parameters to the script and will try it again in the morning.

CcmEval Scheduled task not being created with "Access Denied" error 0x80070005 only on XP machines

Before coming on here I checked out http://social.technet.microsoft.com/Forums/en-US/ddbfe6c3-ee54-4b2a-a3a7-a6515d974f76/client-check-failed-on-xpserver-2003-systems-onlyccmeval-is-not-being-scheduled?forum=configmanagerdeployment (GPO
to allow scheduled tasks by users) and another thread about a hotfix that seems to be pre-XP SP3 and pre-CM 2012 R2.
That said, I'm having an issue many seem to have, but I can't find the answer. From what I understand SCCM uses the user context to create the CcmEval task, but in XP users cannot set a task to run as any other user (ie SYSTEM in this instance) so what is
the workaround? I can't just give users Administrator permissions to install the client.
The exact log entries are:
<![LOG[Client evaluation task doesn't exist.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356" file="ccmevalcheck.cpp:705">
<![LOG[Client evaluation task is not found or is disabled or is not compliant, perform remediation]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2"
thread="4356" file="ccmevalcheck.cpp:341">
<![LOG[Attempting to recreate client evaluation task.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="1" thread="4356" file="ccmevalcheck.cpp:833">
<![LOG[Task scheduler 2.0 is not supported, peform task registration with 1.0 API.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="1" thread="4356"
file="ccmevaltask.cpp:345">
<![LOG[Failed to delete task Configuration Manager Health Evaluation (0x80070002).]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356"
file="ccmevaltask.cpp:379">
<![LOG[Failed to create task item (0x80070005).]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="3" thread="4356" file="ccmevaltask.cpp:387">
<![LOG[Failed to create client evaluation task.]LOG]!><time="19:05:43.548+360" date="12-14-2013" component="CcmEvalTask" context="" type="2" thread="4356" file="ccmevalcheck.cpp:850">
The bolded section is what's telling me it's Access Denied, and manual creation of any program task set to run as SYSTEM tells me the same- users cannot do this; only admins can.
What can I do?

So after sifting through some RSOP results and GPO objects I found a policy that wasn't necessarily prohibiting creation of them. (Not where you think it would be - under
Administrative Templates > Windows Components > Task Scheduler > "Prohibit New Task Creation" -
this was set to allow them) but this one I found was a File Permissions policy that set SYSTEM permissions to READ and EXECUTE.
I've changed this to FULL CONTROL for SYSTEM. I'm unable to get on the machines to examine everything closely, but from what I can see at least one of them has remediated themselves and now has a successful client check in the console. Hopefully the rest
of them will come around as GP updates itself and the client does an evaluation to remediate the Scheduled Task.
Hopefully this helps someone in the future as well.

XLreporter scheduled tasks stopped running

Hi Experts,
We are experiencing problems on XLreporter scheduled tasks.
They worked properly with sending emails as daily routine. However for some reason they stopped running in windows Task Scheduler. We can still run the jobs thru manually in XLreporter Organizer with correct result and sucessful logs. In the mean time the service of Task Scheduler is ok for other tasks than XLreporter.
What we can see in Event Viewer is the error message with two other information message below for each run:
Error:
The VB Application identified by the event source logged this Application IXExecutor: Thread ID: 5904 ,Logged: An error occured while Initializing Job
Object variable or With block variable not set
Info:
The VB Application identified by the event source logged this Application IXExecutor: Thread ID: 5904 ,Logged: Before deleting mclsIFDSApp
Info:
The VB Application identified by the event source logged this Application IXExecutor: Thread ID: 5904 ,Logged: IXExecutorProxy - ExecuteJob: Before Exit Sub
The SBO version 8.8 PL14 on windows server 2003 R2 SP2 ,SQL Server 2005
Can you please advise? Many thanks Ryan
Edited by: Ryan Fu on Jun 22, 2011 3:55 AM

Just found this one too:
Note 855021
If you want scheduled report jobs in XL Reporter to be executed independently of the logon status of the user who defined the job, you must allow Microsoft Excel to be started by the scheduled job.
1. Choose Run from the Windows Start menu and type dcomcnfg.exe. A window called Component Services appears. Choose Component Services->Computers->My Computer->DCOM Config->Microsoft Excel Application from the list.
2. Right-click on Microsoft Excel and choose Properties. Choose the Security tab.
3. Choose Customize under Access Permissions and choose Edit...
4. Choose Add... and choose Users and/or User Groups that require access to Excel. Then choose OK.
5. Repeat the procedure for Customize under Launch Permissions.
6. Choose the Identity tab.
Choose This User.
Choose a user that is a member of the administrator group from the browse button and enter password.
This user will be the one that is given access to Microsoft Excel when executing scheduled jobs. Normally this would be the Administrator user.

[Forum FAQ] Fixing scheduled task Next Run Time displaying as expired time plus days to delete

Symptom:
We used Task Scheduler to create a scheduled task. For example, we configured a daily task, starting from 3 AM 9/3/2014, recurring the task every 1 day, and set the expiration time as 3 AM 9/3/2015 (See Figure 1). Under
Settings tab, we checked If the task is not scheduled to run again, delete if after:
option, and set the value as 30 days (See Figure 2).
However, in the Task Scheduler Library snap-in, we saw that the Next Run Time of the task is 3AM 10/3/2015, which equals expiration date plus days to delete (See Figure 3), but the right value should be 3 AM 9/2/2014 because the task has never been run.
Figure 1
Figure 2
Figure 3
Cause:
This is a Task Scheduler interface displaying issue. Although the next run time that is displayed in the Task Schedule is incorrect, the trigger will be fired correctly.
Solution:
We can install the hotfix in the following KB article to fix the displaying issue, though the symptom in the article is different.
An incorrect value for Next Run Time is displayed when you specify multiple triggers to schedule a task in Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2
http://support.microsoft.com/kb/2495489
After installing the hotfix, we need to restart computers to make it take effect.
In this example, after installing the hotfix and restarting the computer, we see that the next run time of the task is displayed correctly in Task Scheduler (Figure 4).
Figure 4

I am not running out of space, but I do have the same problem. Every so often TM does a backup which is about 60 GB bigger than expected.   The extra is always a new backup of /System /Applications /usr etc. - that is the 'system files'.
The key thing is, as you have noticed:
Examining the content of the latest backup, the one that did not fail, shows that some system directories, /Applications, /usr, and /bin are missing
As a consequence the next backup is, in my case, 60 GB bigger because it includes all the system files.
It is as if 'systemFilesExcluded' was turned on for the previous backup (the one that 'did not fail'). But I have looked in the .exclusions.plist for this backup and it is exactly the same as for other backups and does include:
        <key>systemFilesExcluded</key>
        <false/>
It seems that TM is treating this as if <true/>.
Like you, I have done a disk verify and it finds no errors.
I think this must be a bug. I have had this on four occassions since upgrading to Mountain Lion. And it is doing a large one right now - I have caught it in the act!

Windows 2008 R2 server Scheduled Task not working

I have a batch file that writes to a file, when I click it manually it works. However when I have it set in a scheduled task it will create the file but it will not write to the file.
How can I fix this?

Hi,
1.
Please try to make sure the
Task Scheduler: Service is running.
For details: run 'services.msc', Scroll down to the 'Task Scheduler' service, Check the 'Startup Type' column, The 'Startup Type' should be set to "Automatic",
Check the 'Status' column.
If the service is started, it will list 'Started' in the 'Status' column.
2.
Please try to make sure Group Policy preventing the user to run the task.
3.
Please try to make sure UAC has been disabled.
4.
Please try to enabled the
policy Inclusion list for moderate risk file types, and fill ‘.bat’ in the blank.
For details:
User Configuration -> Administrator Templates -> Windows Components -> Attachment Manager
In addition, please try to refer
this to troubleshoot.
If the issue persist, please try to collect more information for further analyze:
Event log
==============
1. Click "Start", click “Run”, input "eventvwr" and press Enter.
2. Expand the "Windows Logs" node on the left pane, right-click on "System" and click "Save All Events As"; in the pop-up window, click to choose the Desktop icon
on the left frame, input "sys" in the "File name" blank, and then click save.
3. Expand the “Applications and Services Logs”. Click the arrow next to Microsoft, and then Windows, and then TaskScheduler. Click Operational. Click
"Save All Events As"; in the pop-up window, click to choose the Desktop icon on the left frame, input "policy" in the "File name" blank, and then click save.
4. Locate the two saved log files on the Desktop and send them to us.
GPMC.log
==================
a.
On domain controller, click Start -> Run, type GPMC.MSC, it will load the GPMC console.
b.
Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select the proper user in the wizard)
c.
Right click the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file and send it to me.
please contact me with my account:
[email protected] to get a workspace to upload the information.
Hope this helps!

CF9 Deleted Scheduled Tasks Still running

I have several scheduled tasks that were deleted via the admin but they are still running. Don't show up in the admin, but still run.
I have tried to programmatically delete them also. Have looked in neo-cron.xml and they dont exist in there either.
Any ideas?

Update to this.
Not only are deleted items running, but active items are running twice.

KM Scheduler Task not running

Similar Messages

Maybe you are looking for