KM to connect with IMS/DLI

Hi everybody,
we have a possibility here in Portugal to migrate an application from IBM Mainframe (COBOL with IMS/DLI) to OracleDB. I'm thinking in using ODI to migrate data from IMS to Oracle DB. Is it possible ? Do we have KM to do that? Is it the best alternative?
Thanks in advance for your help.

It would take a whole course to explain the fundamentals of SSL.
But yes, you need the servercert because your the client.
I have been able to just import the CA cert in the past and it workedI don't know how it could have worked. Maybe your client used the same KeyStore/Truststore as the server.
(Client and server on the same machine, using a common KeyStore/Truststore,
or copied the KeyStore/Truststore from the server to the client)
Or your client hadnt' enabled SSL before?

Similar Messages

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Unable to read messages - rookie with iMS 5.2

Hi,
I suppose this forum is from the iPlanet Messaging server, my excuses in advance if this matter is not properly posted.
I'm trying to install an iPlanet Mesaging Server v5.2, Directory Server 4.16 coming with the suite the customer bought in 2003. The server was okay but after a crash I had to reinstall the server, inherited from another person who left so, I'm a rookie with iMS but not with Solaris and SIMS 4.0.
I have followed all the procedures to install the server. Have created an user within the console administration. The user is recognized thanks to imsimta dirsync -F. I can login via HTTP and send messages outside.
My drama is, after days of research through the docs, that I can't read incoming mail. As a matter of fact the server receives email from outside seen snooping the network connections but nothing shows un into the INBOX, neither HTTP nor POP3 client.
There's not a clear evidence is the iDA (dlegated admin) is compulsory to properly manage users and groups, i did not install it, and did not install the Enterprise Server v.6.0 as well.
It is not clear if the ims_dssetup.pl needs to be run, there's an indication stating that if installing the directory server shipped on the same package as the mail server. I have run it as well but it looks like the DS schema was already up-to-date.
The SENT messages are properly shown so, I guess the store is okay but, why I'm not able to read the messages in the INBOX, they don't even show up by using mboxutil at all ("no new messages in server").
What am I doing wrong? any help would be highly appreciated.
Thanks a lot in advance.
Fabi�n R. Breschi

Please do remember, iMS 5.2 is two years old. We do not re-do a package, even two years later.
The download of iMS 5.2 continues to contain Directory 4.16, even though DS 4.16 is End Of Life. We encourage installatin of a current Directory Server rather than the one packaged with the download, and you would have seen that recommendation even as you performed that installation.
The release notes I'm referring to are the original 5.2 release notes. These were repeated from the 5.0 and 5.1 release notes, too.
you can still download the p2 patch from:
http://www.sun.com/download/products.xml?id=411bb50d
this is a patch, not a full release. Install your 5.2 bits, and then apply the patch.
Something else you may need to do. The Admin Guide, Appendix B talks about "direct ldap". We strongly recommend following those directions, even before starting the server. The old method for accessing the Directory data, "dirsync" will not be fixed, and does exhibit problems.
There are only a "readme" and a "buglist" associated with the p2, and that's included with the download itself.

Ichat losing connection with aim host

my ichat always disconnects and says "lost connection with aim host" what does that mean? also, when im signed on i am able to send messages to others and it appears that im online, but really im not because i dont recieve anyones ims. i've talked to friends who say im not online when it appears that i am on when i look at my computer. why do i have this problem? what is wrong with my ichat?
powerbook G4 Mac OS X (10.4.6)

Hi Irobin,
I am puzzled by this at the moment.
Deleting the .plist file would normally sort this.
Can you create a test Mac User account on your Mac.
Set up iChat with exactly the same Screen name in this new account.
Does this work ?
You will only see the screen names unless you export the other (Mac Account) Address Book details and import them into this account's one. This can be done though the Backup option the Address Bok has.
10:46 PM Sunday; July 9, 2006

Adobe cloud has lost connection with the server

Adobe cloud has lost connection with the server, can't get adobe cloud to work so I can re-install photoshop to fix a corrupted DLL file.

*Adding new items/removing orphans*
Try iTunes Folder Watch or iTunes Library Updater. Folder Watch is much faster on the adding files front, can be set to run in the background and includes a useful exclusion feature, however it’s slow at removing orphans. iTLU is better for this although doing it manually after looking at a list of proposed removals generated by Folder Watch is probably faster still. iTLU can also be set to update iTunes when you've used 3rd party tools to change tag info.
You may need to amend the list of file types these programs look for. My list includes:
.mp3 .mp4 .m4a .m4b .m4p .m4v .mov .wav .aif .mid .ipa .ipg .ite .itlp .m4r .pdf
Note the last 6 types may not be recognised as already being in the library so should either be omitted from the search or you can add (at least for Folder Watch) individual exclusions for files you know are already in your library.
tt2

Untrusted server cert chain - while connecting with ldap

Hi All,
I am getting the following error while running a standalone java program in windows 2000+jdk1.3 environment to connect with LDAP.
javax.naming.CommunicationException: hostname:636 [Root exception is ja
vax.net.ssl.SSLException: untrusted server cert chain]
javax.naming.CommunicationException: hostname:636. Root exception is j
avax.net.ssl.SSLException: untrusted server cert chain
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(DashoA12
275)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA12275)
at java.io.OutputStream.write(Unknown Source)
at com.sun.jndi.ldap.Connection.<init>(Unknown Source)
at com.sun.jndi.ldap.LdapClient.<init>(Unknown Source)
at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source)
at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source)
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
at javax.naming.directory.InitialDirContext.<init>(Unknown Source)
at Test2.getProxyDirContext(Test2.java:66)
at Test2.main(Test2.java:40)
Any help would be appreciated
Thanks in Advance
Somu

This got resolved when in the code the following
System.setProperty("javax.net.ssl.tmrustStore", CertFileName);
where cert file name is the filename with complete path.the file is a CA certificate of the LDAP server
in X509 format

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

Lost connection with Time Capsule (Office for Mac programmes run down)

My colleague and I work at the office with 2 Macbooks. Both are connected wirelessly to the Time Capsule, which we use as a shared hard disk. We use Office 2008 for Mac. Now Word and Excel run down often after of little things like doing a search or cutting and pasting. I get the spinning ball can only do a forced quit to end the program. This is frustrating and time consuming!
A friend told me to change my UID, cause my colleague and I both have the same UID (501) at our Macbooks. He downloaded Server Admin Tools to change my UID into 1001 with Work Group Manager. But when I arrived at the office this morning I didn't have a connection with the Time Capsule. To be able to work I changed the UID back to 501 again (but now I can't open excel document inless I drag them to the hard disk of my Macbook).
The friend is not a Apple professional so he doens’t know how to help me anymore. Does anyone else have a suggestion?

Temporarily, try connecting an Ethenret cable from your Mac to one of the LAN <-> ports on the Time Capsule
Open AirPort Utility and Click Manual Setup
Click on the word "Status" (2nd Line) and a window will open to with information about why the light is flashing amber

"Lost Connection with AIM" repeatedly

Hi there,
I'm using a new Linksys WRT54GL router with the DD-WRT v23 firmware -- which is otherwise fabulous, by the way -- but since going with the router iChat has been pretty unreliable. I can't connect to my sister in England (I'm in Canada): we keep getting "insufficient bandwidth" errors (I'm on a very hi-speed cable internet connection, so I don't think it's me!). Moreover, AIM frequently kicks me off iChat with the message "Lost connection with AIM".
I've configured my router using instructions linked from this forum. I'm forwarding the following ports to my computer:
5060
5190
5220
5222
5678
16384
And while I can connect to other users okay (except my sister, it seems), staying connected it a real issue. Can anyone recommend a fix?
Thanks,
Aaron.
PowerBook G4 15-inch 1.67 GHz Mac OS X (10.4.5) The last PowerBook ever!

Hi Aaron,
This last port should be a group of 20 ports (16384-16403)
iChat needs 4 ports from this group to do 1-1 Audio or Video chats.
Many Linksys have UPnP. It is found in the Administration tab. If you have this you could use this. Disable the Port Forwarding if you do.
Also port Forwwarding points to one IP/computer. If this is the case for you and you still have the device doing DHCP there is a cance you computer's IP has changed if it goes to sleep or is shut down when the lease time runs out.
Check this on your computer and the Port Forwarding settings.
10:26 PM Monday; February 27, 2006

Lost connection with db, restarting Weblogic

hi,
we have an server with oracle and whenever the connection
with the db is lost for any reason and then comes again in a while the weblogic needs to be restarted again.
i would love if someone could give me a tip of what excactlly weblogic is "loosing" from the connection or how i may run a script or anything so this to work automatically(mean to startup weblogic again).
thanks anyway for reading my problem.

Hi,
Along with enabling "Test Reserved connections", also ensure refresh connections is enabled. Test Reserved Connections tests the connection only when a client makes a request while refresh connections ensures that all unreserved connections are also tested.
-Jagan

"Lost connection with AIM" error message

Hi all,
I've been a long-time iChat user — I've had very few problems, but now, at home, whenever I've been connected for about 10-15mins, iChat just disconnects with the simple iChat Connect Alert that the app has "Lost connection with AIM. The connection with the host was unexpectedly lost."
My Buddy List collapses to a "disconnected" header and I diappear from my Buddies' buddy lists. If I'm in the middle of a chat (video, audio or text), the chat continues uninterrupted, but I still disappear from people's lists as if I'd disconnected manually. Weird.
The net result is that I have to keep checking to see if I'm connected and then reconnecting all the time. A real pain in the proverbial.
It only happens at the house. My laptop doesn't disconnect if I'm at the office, for instance.
I have cable, coming in to Netgear 814v2 router; out to an 8-port gigabit switch, which then feeds my three main machines. All via ethernet cabling.
All machines have the same problem described above.
I've made the usual Quicktime setting changes.
I've listed the necessary ports in my Mac firewall settings (even though the firewall is turned off).
Each machine has a dedicated IP issued by the router (10.0.0.2 thru 10.0.0.5)
The router firmware is up to date.
What else is there?! I have no problems initiating or joining any sort of chat with my buddies around the world. I have excellent bandwidth. My internet and email are never interrupted 24/7.
Can someone help me? Pretty please?
17" Powerbook G4 & Dual G5 2.5Ghz Mac OS X (10.4.7)

Hi
Try this log on to AIM on port 443 rather than port 5190
Go to IChat > Preferences > Accounts.
Log out of AIM and then use the Server Settings tab
Set the port to 443.
Log back in again.
Tony

Lost ActiveX connection with LabVIEW server

I have called LabVIEW in TestStand and tried to execute the test cases .
While executing I got the following error: ( Lost ActiveX connection with LabVIEW server.
The LabVIEW adapter will try to reconnect on the next execution attempt.-18001; An error occurred accessing the LabVIEW ActiveX automation server.).

Same error. Is anyone from NI going to bother commenting on this? It's been >8 months...

Connection with a server or service is lost

I have small network setup with Mac OS X as the server and around 6 clients (mix of PC's and Mac's) authenticating from OD on the server. Since last week I am getting this strange error from server admin "Connection with the server or service is lost. Contact the n/w administrator or try log on again.". I get this error message every morning and none of the server features can be accessed including the log in to the network which fails on all the machines. Everything will work fine when I reboot the server.
So, I wanted to know what is causing this problem & how to go abt fixing it?

I can confidently rule out the possibility of an intruder interfering with the network.
Who said "intruder"?
So there is no malware on the local client and server boxes, nor on any printers, nor on any WiFi widgets or managed switches or other network infrastructure, and there are no unauthorized wired or wireless connections? That's a very rare achievement. Congrats; most excellent work! (It's probably not malware, though; it's more likely some authorized activity or authorized person and not malware. Though yes, it could be malware.
As for the disconnection here...
This could be building cleaning crew borrowing an electric outlet for some of their cleaning equipment. Unplug router, plug in the cleaning equipment, clean, plug router back in, leave. Or some helpful security guards shutting off a power switch or a breaker as part of the nightly rounds, or any number of other variations, too. A vacuum cleaner running across a damaged network cable, or a glitch or sag or transient caused by a high-demand electric device changing its power state.
Find out which widget (router, switch, firewall, whatever) is involved and work from there.
Also look for traffic spikes and other such; for odd network traffic patterns.
Scheduled reboots of network devices or such?
Hardware problems?
Also look for time-out programs and idle activity monitors and related; these are rare on Mac boxes, but have been seen in other environments, and have been seen on various network servers.

Lost connection with server

For about two days now, the bbm application has refused to launch. It has been writing lost connection with server....can any one please help! It's really urgent

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

KM to connect with IMS/DLI

Similar Messages

Maybe you are looking for