Km2m rebooting with installed firewire card problem fixed

Go to BIOS, Power management. Choose IRQ/Event Activity Detect. Disable Wake Up on PME.

I installed the drivers before turning on my firewire device, it was plugged into my firewire port but it wasn't turned on, could this have still messed it up? And yes I have went to the multimedia menu and set the FW soundcard and everything seems to be running fine it recognizes it and everything there is just no sound. It may be something very small and dumb I am overlooking, I am going to reinstall the drivers with the device unplugged tonite and see if that helps. Thanks for the help
Ryan

Similar Messages

Z68A-GD55(B3) Having problems installing firewire card with TI TSB43AB23 chipset

Hi,
I have a firewire audio interface and two PCI firewire cards from different manufacturers that both have the TI TSB43AB23 chipset which is generally considered one of the best to have.
I originally had issues with one of these firewire cards in that the windows drivers wouldn't load properly so I bought a new PCI firewire card.
The new card was slightly better but this is what happens:
if i boot the system 10 times then:
- one of those times the card isn't detected at all, even if it was detected fine and drivers loaded without error on the previous boot
- two of those times the driver reports errors with the card and i have to uninstall then reinstall the driver
- 7 of those times the card is detected and there are no problems with the driver but the firewire device connected to the card isn't detected on the system which means the PCI firewire card isn't working properly
Then, one day it worked. And it worked for a week and it worked on the three different bootable partitions on my PC (all running win7 pro).
Then, it stopped working, on all 3 operating systems all at once, and i'm now back to the scenario i described earlier.
I know the firewire device works 100% because i've tested it on another MSI MB that has inbuilt firewire. I'm not 100% sure about the firewire card but it is new and this has happened with two different firewire cards.
Live update says everything is up to date.
Thanks,
Tim

It could well be an incompatibility with the card.
Perhaps you want to try one of the later beta BIOS' in this thread https://forum-en.msi.com/index.php?topic=150368.50 Always use the forum flasher >>Use the MSI HQ Forum USB flasher<< Do a CMOS clear before and after a BIOS flash.
Also worth your while to report your findings to MSI technical. >>How to contact MSI.<<

Installing firewire card- caution?

I've been having problems with a Miglia a/d converter. Miglia thinks it's because of my firewire card -which btw works perfectly with other a/d converters- and now they sent me a firewire card to install. They think that will solve the problem.
For the first time in years I have had a very stable system (new G5 quad) and I am anxious about messing it up. What are the chances of this PCI firewirecard conflicting with/damaging the other hardware? (I realize I'm being a little paranoid about this but there you go, after years of troubleshooting...)
TIA,
McWolf

http://www.miglia.com/products/expansion/alchemy_fw400/index.html
The above is the card. That's not a PCI express card, is it?
Miglia knows I have a QUAD but I wouldn't be surprised if they sent me the wrong card...
It has to explicitly say Express? How do you recognize an Express card?

Please! Help me with my SIM card problem!

When I first bought the Blackberry Flip 8220, I was constantly having a problem with my SIM card and the signals. My signal would constantly drop down to none and would go into SOS mode. Not only that, but it would also say either "SIM Card Error,""Invalid SIM Card," or "Insert SIM Card." So, the RIM sent me a new replacement for the cellphone. For the first few days, it worked just fine but, as the time passed by, the phone started to have the similar problem. What's worse is that as the time passed, the more problem started to show up! Now, my side buttons aren't functioning and the rate of my phone experiencing the problem with the SIM card and the signals, similar to the ones mentions above, has risen drastically. For now, the side buttons aren't my priority but what I would like to find out is how come my phone is experiencing such problem with the SIM card and how I can fix it. Please, help me! Due to this problem, I can't even receive the international calls.

Hi and Welcome to the Forums!
I don't believe that RIM issues SIMs...the carriers issue the SIM cards since these activate your phone on their network. RIM doesn't care what network you use...but the carriers do
So, what I'd suggest is that you go see your carrier and find out what's going on with the bad SIM. It is also possible that the device itself has a problem with the SIM card contacts...in which case the advice is the same, your carrier provides your service, so going to see them is the right thing to do.
Good luck and let us know how it goes!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Does Lightroom 5 (CC) support tethering for a Nikon D1x with a Firewire Card on Windows 7?

Our company wants to use an older, but fully functional, Nikon D1x and tether it to a Windows 7 Workstation with Adobe CC and a FireWire card installed. Will Lightroom 5 recognize the camera and allow us to manage workflow in a tethered setup, complete with photo taking and instant importing?
Thank you,
Jim

Hi Hal,
Thanks for your response!
I noticed that this list only shows versions of Lightroom 3 and above. Would a D1x have found compatibility with an older version of Lightroom? If so, might this compatibility be carried forward?
In either case, what third-party applications might you suggest?
Thanks a lot,
Jim

K7D Master keeps rebooting with new vid card

I had a GForce 4 ti 4600 128 MB and it ran stable for over a year. I just installed 2 different new videw cards had had the same results with both cards. When I installed the cards, they seemed to flake out and the screen would get worse and worse then the pc would reboot. I tried a GForce 5700 256 by gainward I think and now I have a GForce 5700 256 by MSI and having the same results. I just installed the latest drivers and the pic qit getting distorted but the pc will just reboot randomly after a few minutes of running. Sometimes 5 minutes sometimes 2.
Please help

http://www.msicomputer.com/product/detail_spec/product_detail.asp?model=K7D_Master_L
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=344&MODEL=MS-6501
What are your temps?
Remember to uninstall previous driver before installing a new one.

Target Mode with PCMCIA Firewire Card??

Just bought a 17" PowerBook. Planned to use migration tool to move data and info from my old 15" TiBook. BUT!! My TiBook's internal Firewire port fried a couple of years ago and I've been using a PCMCIA Firewire card. Can you access Target Mode through an external Firewire card?? Doesn't seem so.
When I boot with "T", it comes up in target mode, but migration tool doesn't recognize the target mode machine thru pcmcia firewire.
Any solution?
Jim

If you are able to mount an external FW drive on your Ti's desktop using the PCMCIA adapter, then perhaps you can clone your TiBook's HD to the external and then use the external as a source drive for Migration Assistant. (You are able to use a bootable clone on an external FW drive as a source for Migration Assistant, in any case.)
Good luck!
Tuttle
1421/8129

Server 2003 with two network cards problems

We have a win server 2003 with two network cards. From the server we connect using a vpn client from cisco to another server. When we do that we can NOT RDC to our server because it inherits the remote IP from the vpn connection. We installed an additional NIC. We gave an static IP to connect to our local network. How can we or is there a way to tell the vpn client to use one nic card and leave the other so we can RDC to it? thanks

It is possible to configure server to use on nic for incoming and other for outgoing, but it is not possible when vpn client is running. Also it cannot be specified as to which card to use.

3109c rebooting with micro-SD card inserted?

Hope someone can help me. I've a 3109c, which works fine with just it's SIM card in, but if I put in my micro-SD card as well (used to store music and some wallpaper pics on, about 500MB or so at the moment) it starts-up, but within 10 seconds or so sometimes either switches itself off and on again (reboots if you will) or just shuts down completely.
I think it's maybe something to do with the music player application (and the M4A tracks on the micro-SD), sometimes helped if I can dive in and get it to update the music library (and having a track stored in the phone memory seems to help too) it can be coaxed to work properly. It's then stable until it either gets powered off or the battery runs out of juice, at which point I've got to spend a while coaxing it back to life again...
It's a 2GB Sandisk Micro-SD card, which is currently reformatted down to 1GB in trying to help this issue (my WinXP PC for some reason won't format it to 2GB, although at the moment 1GB is enough space). I've tried updating the software via PC Suite, but it says I'm up to date.
Any clue would be appreciated, as it's driving me nuts trying to keep the thing perpetually powered and the battery alive Message Edited by darrenhill on 26-Nov-200706:49 PM

I am new to this discussion group and have more or less same problem.I have also formatted the memory card and it works fine with an adaptor in the laptop PC.
My Nokia 3109c has mp3 and I have inserted 2gb micro SD card. For some weeks I was able to listen to the songs. Now I am unable to access the memory card and play the player. When I connect the phone to the PC the USB does not recognise data storage. I have music files in the micro SD memory card but whn I play the player it syas 'No music files found'.
Can some one help?

Problems running PC game with bootcamp, graphics card problem?

I have searched extensively on answers to this question and I've gotten some vague ideas of what to do, but not a direct answer.
I recently installed a copy of Windows on my 15in Macbook Pro (the ones that came out right before the latest ones in late August/Early October 2008 or whatever). I did this in order to play Final Fantasy XI Online on my laptop. The machine is more than capable of running the game and I've read forum posts that had said that it works fine through bootcamp. I installed the game and was playing it just fine until one day the game began to lag really bad in areas where there were a lot of people or in other words something very demanding of the memory/graphics. I don't mean internet speed lag, I mean the computer would slow the game down to a crawl and the sound would be sort of garbled like it was some sort of feedback. It would happen periodically or if some sort of animation would start (spellcasting, etc)
I've tried everything from changing the settings of the game so that it's not as demanding to installing modified drivers for the graphics card (256mb Nvidia GeForce 8600M GT). I read that there may be some problems with the graphics and sound cards communicating which causes lag?
The computer also gets unnaturally hot while I run the game/windows in general. Could it be a cooling problem?
Please help!

Processor:
Intel(R) Celeron(R) CPU E1400 @ 2,00GHz (2 CPUs)
Memory:
4gig,Corsair TwinX XMS2 DDR2 800Mhz
Hard Drive:
Seagate 1 TB
Video Card:
ATI Radeon HD 3850 X2
Monitor:
EIZO monitor
Sound Card:
Realtek 7.1 HD Sound
Speakers/Headphones:
Mikomi 5.1 HD @ Headphones
Keyboard:
Logitech Gaming Keyboard
Mouse:
Logitech MX510 Gaming Mouse
Mouse Surface:
Belkin Mouse Mat
Operating System:
Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090804-1435)
Motherboard:
MSI P35 Neo 2
Computer Case:
CiT 1004 CSCIT1004 Black Screwless Gaming Case
PSU:600 Watt GreatPower
this is my gaming rig

Help with ( mobo + graphics card ) problem

i have a MSI P35 Neo2-FR: Platinum and my gpu is a ATI Radeon HD 3850 x2 that runs in crossfire.
i noticed the other day when i tryed a game for the 1st time in a while.. I only built this pc last xmas.. The problem i noticed is the preformance of the graphics card didn't seem up to scratch with the preformance i have looked around many sites but can't find a solution to the problem when i looked at the review of the MSI P35 Neo2-FR: Platinum motherboard that someone had wrote up i can't remember were i sow it but they said that the Duel cards they have only ran at 4x when i would have thought would run at x16
any solution how i can fix this problem?

Processor:
Intel(R) Celeron(R) CPU E1400 @ 2,00GHz (2 CPUs)
Memory:
4gig,Corsair TwinX XMS2 DDR2 800Mhz
Hard Drive:
Seagate 1 TB
Video Card:
ATI Radeon HD 3850 X2
Monitor:
EIZO monitor
Sound Card:
Realtek 7.1 HD Sound
Speakers/Headphones:
Mikomi 5.1 HD @ Headphones
Keyboard:
Logitech Gaming Keyboard
Mouse:
Logitech MX510 Gaming Mouse
Mouse Surface:
Belkin Mouse Mat
Operating System:
Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090804-1435)
Motherboard:
MSI P35 Neo 2
Computer Case:
CiT 1004 CSCIT1004 Black Screwless Gaming Case
PSU:600 Watt GreatPower
this is my gaming rig

IPhone 4 (GSM) with a graphics card problem (artifacts).

Hi,
My iPhone 4 (GSM) started making a color bands about two minimeters flush with the bottom edge of the screen and about a month and a half later the picture started to bounce and now it appears on the screen that I could call artifacts. I'm sure that the problem comes from the graphics card.
Serial Number: 81*****A4S

Yes it does. You just need to obtain a SIM card from your carrier.

"1008:9,-5000" I do have a similar issue with installing Iris card scanner.

When I try to install an IRIS card scanner, the systems stops at the end and indicates"1008:9,-5000" no accessibility rights.
Reparing accessibility rights does not help. I have recently installed IOS.

I'll try Silverfast.
Err... Try VueScan first. VueScan have one-for-all software, Silverfast - lot of modules for specific scanners. If they not have version for your specific scanner - no chances.
VueScan works with at least some IRIS models: http://applejac.typepad.com/applejac_macintosh_users/2009/05/vuescan-universal-s oftware-image-capture-tool.html
And I see 10.7-10.8 support on IRIS page: http://www.irislink.com/c2-1628-189/Mac-OS-compatibility-support.aspx

MSI 770-C45 with TV turner card problem

My problem is that it will freeze up after I start the TV turner program. I have tried two different TV turner cards, both are of PCI-E 1X interface. Both TV turner works fine in other motherboard of 780G chipset (Vista or Window 7). Currently I am using Mygica 8557 in a 64 bit Windows 7 environment, the computer will freeze 30 seconds after the TV software (TotalMedia) start . However, I can ran 3DMark2006 without any problem. Before using Mygica 8557, I use another TV turner PE186Q , the case is even worse, the computer will freeze during driver installation (Vista 32bit) . But the same card work fine with another brand 790GX motherboard.
I would suspect it is the IRQ problem but since there is no adjustment option for PCI-E resouces in BIOS, there is nothing I can do.
Did anyone have the same problem like mine ?
My config is as follow :
Phenom II 545
MSI 770-C45
G. Skill DDR3-1333 2G x 2
WD 320G hard disk
ATI 2600XT
Corsair cx400 400W power supply
MyGica 8557 , Grandmars PE186Q

Quote from: sparkeh on 23-January-10, 22:31:51
Thanks for all the advice.
Tried with 1 stick and the system was alot more stable, no BSOD's or any kind of freezing. I ran prime95 overnight with 1 stick and all was fine, if I insert another stick the system is still stable but I get an error in prime95 after a few minutes.
[Jan 23 12:02] Worker starting
[Jan 23 12:02] Setting affinity to run worker on logical CPU #2
[Jan 23 12:02] Beginning a continuous self-test to check your computer.
[Jan 23 12:02] Please read stress.txt. Choose Test/Stop to end this test.
[Jan 23 12:02] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
[Jan 23 12:03] Test 2, 4000 Lucas-Lehmer iterations of M19922943 using FFT length 1024K.
[Jan 23 12:06] Test 3, 4000 Lucas-Lehmer iterations of M19374367 using FFT length 1024K.
[Jan 23 12:07] Test 4, 4000 Lucas-Lehmer iterations of M19174369 using FFT length 1024K.
[Jan 23 12:10] Test 5, 4000 Lucas-Lehmer iterations of M18874369 using FFT length 1024K.
[Jan 23 12:10] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Jan 23 12:10] Hardware failure detected, consult stress.txt file.
[Jan 23 12:10] Torture Test ran 8 minutes - 1 errors, 0 warnings.
[Jan 23 12:10] Worker stopped.
I am in the process of buying a new PSU, the system is so unstable with all memory slots populated.
Quote
Tried with 1 stick and the system was alot more stable, no BSOD's or any kind of freezing. I ran prime95 overnight with 1 stick and all was fine, if I insert another stick the system is still stable but I get an error in prime95 after a few minutes.
Re-test the each stick alone. [You may have defective stick]
If each one is stable at his own, before fill all 4 DIMM's:
* Leave Memory timings to Auto
* Ensure 2T is used
* Drop memory freq. to 1066
* Apply memory voltage recommended by memory vendor

New Install Sound-card Problems

Hello all, trying out Arch Linux and everything else works for the most part, but it seems I may have messed up an option while configuring ASLA.
My laptop is a MSI CR650-016US if it helps knowing the model.
Description of problem: At the beginning of configuring the audio I had 2 options for sound cards, but now I'm missing the one that had the most option bars (master, headphone, etc.) which happens to be my analog one. It came back while the writing of this post, but it seems to have gone back to the way it was before. I try to change the volume via alsamixer, but I just get the HDMI output which doesn't output via my speakers.
I have tried editing rc.conf, modprobe.conf, and asound.conf.
If I need to post some other outputs from the terminal please post and I'll do it. Any help would be appreciated, since I'd like to get some sound on my build. Thanks.
[*my user name*@ArchLinux ~]$ lsmod|grep '^snd' | column -t
snd_hda_codec_realtek 194997 1
snd_hda_codec_hdmi 24121 1
snd_hda_intel 23311 0
snd_hda_codec 89032 3 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_realtek
snd_hwdep 6389 1 snd_hda_codec
snd_pcm 74780 3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc 7089 2 snd_pcm,snd_hda_intel
snd_timer 19544 1 snd_pcm
snd 59214 7 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_realtek
[*my user name*@ArchLinux ~]$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 80 Jan 23 22:22 by-path
crw-rw----+ 1 root audio 116, 4 Jan 23 22:22 controlC0
crw-rw----+ 1 root audio 116, 8 Jan 23 22:22 controlC1
crw-rw----+ 1 root audio 116, 3 Jan 23 22:22 hwC0D0
crw-rw----+ 1 root audio 116, 7 Jan 23 22:22 hwC1D0
crw-rw----+ 1 root audio 116, 2 Jan 23 22:22 pcmC0D3p
crw-rw----+ 1 root audio 116, 6 Jan 23 22:22 pcmC1D0c
crw-rw----+ 1 root audio 116, 5 Jan 23 22:22 pcmC1D0p
crw-rw---- 1 root audio 116, 1 Jan 23 22:22 seq
crw-rw----+ 1 root audio 116, 33 Jan 23 22:22 timer
[*my user name*@ArchLinux ~]$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: ATI Technologies Inc Wrestler [Radeon HD 6310]
00:01.1 Audio device: ATI Technologies Inc Wrestler HDMI Audio [Radeon HD 6250/6310]
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:15.0 PCI bridge: ATI Technologies Inc SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.2 PCI bridge: ATI Technologies Inc SB900 PCI to PCI bridge (PCIE port 2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)

Okay, it's in the 'bin: dmesg and lspci.
edit: just tried running soundoff... and, well, dmesg output hasn't changed. If that means anything to you.
BTW, thanks for the swift reply!
Last edited by Wintershade (2009-10-14 19:07:24)

Km2m rebooting with installed firewire card problem fixed

Similar Messages

Maybe you are looking for