KM3M-V wont boot error code 1 long beep two short

As above but after the 1 long beep and two short beeps it gives off 2 deeper tone beeps! Is it the onboard graphics card thats at fault? if so I'll need to get the m'board replaced, have tried different ddr memory and no difference, processor is an Athlon 2400+ XP
Cheers

Quote from: vanaaken on 22-March-05, 00:34:53
Its a PC I've built for a friend, no bios or hardware update had been performed all he did was come in one night and turned it on, and it did that, it has 512Mb DDR 2700, Athlon 2400+ XP and uses everything onboard eg sound and graphics, no it doesn't have a d bracket unfortunatly! Have tried disconnecting all the drives and even swapping the memory and it still gives the same code.
how long has your friend had the system? did he do anything to it before it started doing this?
you say you swapped the memory, does the system have two sticks, if so try just one on its own. if you only have one stick in it, then try some memory out of another machine. do you have an AGP card you could try? maybe some nasty dust is settled inside AGP slot, try blowing out with air duster

Similar Messages

  • 6910p wont boot / error code?

    HP compaq 6910P displays when powered on -lBe-$-lBe$_ . A backwards accent is over the small e and the dash and small l are connected when powered on. Checked the HD and memory in the bios and all is AOK. Can't boot up, no drive letter displayed. Running windows vista and don't have a boot disk. Does anybody know what this means?

    Hi,
    You can get a VISTA repair and recovery disk here.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • My macbook air wont boot up. Just beeps every 5 seconds and a white light flashes on front of keyboard

    My macbook air wont boot up. Just beeps every 5 seconds and a white light flashes on front of keyboard

    That normally indicates an issue with system memory. The startup sequence can't complete the boot due to a memory issue. Take it in for service.

  • Abc wont work error code 400-1

    Abc wont work error code 400-1

    Hey xoxokt,
    Thanks for the question. The following resource outlines troubleshooting information for third-party content providers on Apple TV:
    Apple TV: Troubleshooting third-party content providers
    http://support.apple.com/kb/HT200072
    If you have playback issues with a content provider's services
    In most cases, you can isolate playback issues to your home network, your broadband connection, or a possible outage with a content provider. To see if your issue is affecting multiple services or a specific content provider, try another service. For example, play a movie trailer from the main menu.
    - If the issue is affecting multiple services on your Apple TV, see how to troubleshoot playback performance.
    - If the issue is affecting a single content provider on your Apple TV, restart your Apple TV by going to Settings > General > Restart. If the issue continues, you might need to contact the content provider.
    Thanks,
    Matt M.

  • T61P died, 1 long beep - 2 short beeps problem - Do the updates from Lenovo KILL our laptop?

    Hi all
    I bought T61P from 2 years ago, everything is ok until yesterday, I turn on my laptop and nothing display on the screen, and with this :  1 long beep - 2 short beeps....
    I make some search, and found a lot of people have the same problem, and almost happend from September - 2009 to now.
    I asked my self why this problem does not happend in the 1st year of using T61P...and this only happend from September - 2009 to now? DO THE UPDATES FROM LENOVO KILL OUR LAPTOP?
    My laptop is out of warranty, and I hate to replace another mainboard.... If I must do it, I will throw my laptop to the Trash, and never buy another Lenovo laptops.

    so far it looks like a strict hardware problem, not related to updates. however, some manufacturers try to "cheat" with bios updates - they make fan to run at higher speed lowering the mainboard temp. This does not solve the problem per se, it just makes laptop survive beyond warranty expiration date, so you, dear customer, will have to foot the bill.

  • HP Pavilion DV7 1120eo doesn't boot (Error Code 1 / CPU)

    Hi,
    I have a DV7 that doesn't want to boot.
    When I try to boot it up, the screen just stays black and the caps lock indicator blinks one time between each "pause", which should be an error code for broken CPU(?!).
    I asked the HP Support team on Twitter how reliable the error codes are, and according to them they should be reliable.
    So I repleaced the CPU with another one, but still the error code shows when I try to boot.
    I'm just wondering if you may know what could be wrong? Could the CPU socket itself be broken?
    I found a long hair laying in between the CPU and CPU socket, but I reckon that it can't be the problem, or else something would've gone wrong like 3 years ago - since it must have been there since the computer was manufactured.
    Anyway, I hope I can get some clarity or advice on things to try out.
    Best Regards
    Alexander

    Baking in the oven can work but it is a crude, temporary fix. Unless you have access to high tech diagnostic and repair tools, a bad motherboard is a bad motherboard and is a "replace only" item. There are services on the internet where shops with the tools will fix your motherboard and the cost is very reasonable if you can remove the motherboard yourself and just ship that, instead of the whole computer. We are talking in the range of $60US. Even if you have to send the board to the US, the cost is very competitive with a replacement board.  Here is a replacement board on eBay that ships worldwide from China:
    http://www.ebay.com/itm/HP-Pavilion-DV6-DV6-1000-D​V7-DV7-1000-Series-laptop-AMD-Motherboard-509404-0​...
    This repair service would be $108 with shipping:
    http://www.ebay.com/itm/Motherboard-Repair-Service​s-HP-Pavilion-DV7-1000-486542-001-506124-001-/3008​...

  • Windows boot error code 0xC00000e9

    When booting from windows 7 Installation DVD source in my Windows server 2008 R2 there is an error pertained-Error code 0x00000e9-File: \Boot\BCD (An unexpected I/O error has occured).What is this error? What is the remedy for this?MumthazMuhsin

    Hi,
    Did you want to install Windows 7 on your Windows server 2008R2?
    The error message: An unexpected I/O error has occurred. Status: (0Xc00000e9)
    is a hardware error pertaining to your system’s BIOS.  Basically it is telling you that the computer is not able to reliably communicate with the hard drive.
    I suggest to update BIOS to the latest version, and try to rebuilt BCD follow these steps in this thread:
    http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/0e6a7b6a-70de-41af-b2c8-5f8f3c86cef7/
    Hope that helps.
    Regards,
    Leo  
    Huang
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Trash wont empty error code - 8003

    I've thrown away all time machine backup files from an external hard disk and my trash wont empty at all now.  Keep getting Error Code - 8003.  Any suggestions????

    Try here:
    http://reviews.cnet.com/8301-13727_7-20020873-263.html
    This guy has written an article giving step by step instructions on how to deal with Error -8003
    Hope this helps

  • Z77A-GD80 Boot Error Code 55

    Okay, let me start with my setup.
    CPU: i5 3570K
    MOBO: Z77A-GD80
    RAM: 4x16GB 2133 Patriot Viper 3
    PSU: Corsair AX850
    GPU: EVGA GTX 690
    My rig is able to boot when more than 2 DIMM slots are used. It will post Error Code 55 and just try to reboot repeatedly with no luck. I tried the following method that worked on my old ASRock Extreme6.
    1. Turn system off
    2. Take all RAM out except A1
    3. Clear CMOS
    4. Set XPM Profile1
    5. Repeat steps 1-4 adding another stick of RAM until all 4 are installed.
    To no luck, this method wasn't successful with the GD80.
    Any suggestions?

    Quote from: xmad on 07-September-12, 04:36:35
    Do you have bios 1.0 installed?
    1.1 was terrible for allot of us with the z77a-gd80.
    Try: https://forum-en.msi.com/index.php?topic=160715.0
    Use the forums flash tool.
    >>Use the MSI HQ Forum USB flasher<<
    Then try with xmp disabled afer a full cmos clear.
    Ps. Did you try each stick individually and each dimm by itself as well? (Check for bad memory / dimm/pathway etc)
    I will flash BIOS to 1.0 this afternoon.
    Yes, I tried each DIMM slot and all memory sticks work. I changed MOBOs from ASRock Extreme6 to the GD-80.
    Thanks for the suggestion, I post results tonight.

  • Itunes wont launc. error code 13014. help. what does this mean? what do i do?

    i tunes wont launch, error message 13014. help!!!!!!what does it mean? what do I do?

    What is the wording of the message? I do not understand what memory you are refering to.
    Computer memory (RAM)
    Computer storage (HD)
    iPod memory
    iPod storage.

  • Cc desktop still wont install error code 201

    cant download CC desktop appAfter spending 1 n a half hours on phone with adobe support .. watching them do everything that i tried before calling.... leaves me to belive that there may be something wrong on adobes end.. i have tried difrent internet connections this is very fustrating.. i have paying clients who are at my neck because there videos arent ready...... 1 and a half hours and the result is i will call tomarow.... very disapointing... at least its a new build.  BEFORE I REINSTALL THIS OS DOESE ANYONE KNOW A FIX FOR ERROR CODE 201.
    MY SYSTEM
    windows 7 ultimate
    amd8320
    gigabyte-usb3
    16gb of ram
    nividia gtx 760

    Hi a-hole ,
    Please try the below steps;
    1. Open Internet Explorer by clicking the Start button Picture of the Start button. In the search box, type Internet Explorer, and then, in the list of results, click Internet Explorer.
    2. Click the Tools button, and then click Internet Options.
    3. Click the Connections tab, and then click LAN settings.
    4. Select the Automatically detect settings. Check box.
    Please let me know if this helps.
    Sarika

  • CS6 wont update error code U44M1P7

    Trying to update CS6 via Creative Cloud and ill i get is 'failed' and then the error code U44M1P7. Could anyone shed some light on why tis might be and a way around it please?
    Thanks

    HI Cfitzo10,
    Could you try the solution here:
    Installation failed. Error U44M1P7 | Updates
    http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    -Dave

  • On startup, what does 3 short beeps, 3 long beeps, 3 short beeps, and a black screen mean?

    On startup, I hear 3 short beeps followed by 3 long beeps followed by 3 short beeps, then nothing. Screen remains black the whole time. Tried to boot holding down option key - nothing. 2010 MacBookPro running Snow Leopard. Any suggestions?

    Intel-based Mac Power On Self Test RAM error beeps
    Power On Self-Test Beep Definition - Part 2
    3 long tones, 3 short tones, 3 long tones: Indicates EFI ROM corruption is detected and the computer is in EFI ROM recovery mode.

  • Mac Air is dark and emits three short beeps/three long beeps/three short beeps ("SOS"). What does this mean?

    Mac Air was left on power attached to a monitor overnight. In the morning there was a message that I had to turn it off by depressing the "on" key for over then seconds. I did this and it would not turn off. It is now emitting three short beeps followed by three long and three shorts ("SOS" in morse code). What does this mean?

    http://support.apple.com/kb/HT2538
    If what I read is correct, you will need to take your MBA to Apple to have its firmware restored.
    I cannot explain why this happened.

  • Error code -36.  Two MACs: One mac can copy DVD data, one can't.

    On the G5 that appears in the profile below, I cannot copy VOB files without getting error code -36 in which the copy operation times out. Another older 1.6G G5 can copy. The problem computer has a Pioneer 115D burner. Older computer has a Sony U10A.
    I believe the problem has come with the new (4 months) Pioneer drive, cause I definitely used to be able to copy off the DVD drive, just don't remember how recently. Doggoneit!
    Thanks.

    I just determined that the same function thru the network was a problem which pointed to the target fw800 G-drive. Then I started copying thru the network and off a DVD to a fw800 G-RAID drive, and the copy was a success.
    So now the performance of this G-Drive (non-journaled). Why would this drive behave this way?

Maybe you are looking for

  • Sun Java Systems Application Server 9 connection-pool ping error

    Hi folks, I tried creating a javax.sql.DataSource MSSQL database connection pool with the jdts type 4 driver I got from sourceforge, and each ping operation I tried gave me the following error message: Operation 'pingConnectionPool' failed in 'resour

  • Smart Pin Dongle AC Adapter 90W KG298AA

    Hi, I have an HP labtop of model: dev6 2170ee I want to get an AC adapter, and I found that the chargere : Smart Pin Dongle AC Adapter 90W KG298AA is compatible with the serice: dv6-2100 Entertainment Notebook PC series However, my original adapter 1

  • Bank details in payslip

    I want to add Bank Details(which is in p0009 table with field name BANKN and leave details in Standard remuneration payslip (pc40-> payroll accounting-A>remuneration statement ) statement i m able to bring the table p0009 in F4 help but the data in n

  • Mail and password: Help please!!!

    I have changed my password and on my iPhone and iPad there is no problem. However, on my iMac, 10.8.2 every time I put the computer to sleep and then wake it up again Mail tells me to verify my password. I press OK but it refuses to accept and I am f

  • Switching tabs causes an automatic tab reload in safari... how do I stop that?

    I generally keep 20 or so tabs open in my safari window. A month or so back, suddenly, each time I click over to a diffent tab the tab reloads. How do I stop this? And is this problem making my computer (fan or hard drive?) wind up for long periods o