KM4M-L Can the FSB be changed???

I have a KM4M-l mobo. Cannot seem to change my fsb or voltage. Worse still my Amd barton 2600+ is 0347.Muliplier -locked. Any idea to overclock?

not with that board as you say it has nothing

Similar Messages

On the iMac G4 can the processor be changed from 1000mhz to a 1024mhz?

On the iMac G4 can the processor be changed from 1000mhz to a 1024mhz?

It's an old iMac that my parents have and want to install a high seep (speed) Internet modem and it's requiring a 1024mhz
Ignore the requirement. 1000 is close enough to 1024 not to make a difference. They cannot be checking the speed anyway.
You may find youtub videos slow.
What version of mac os?
Here is how to find out what version of Mac OS you are running:
Click on the blue apple in the upper left hand of the screen.
click on this icon
Click on the first line, "About This Mac"
Most of these are numbers & that's what we want.
What version & Processor do you have?
You need 10.4 to get a relatively current web browser.
Opera
http://www.opera.com/browser/download/requirements/
http://www.opera.com/download/
OmniWeb 5.11, which, I believe is built on the same framework as Safari 5,
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
for PPC
tenfourfox
"World's most advanced web browser. Finely tuned for the Power PC."
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
What is my user agent?
http://whatsmyuseragent.com/
A larger list:
http://www.macmaps.com/browser.html

Can the case be changed while uploading the data or after uploading ????

hi all ,
can u pls help me ??? can the case of the data in a itab be changed while running the program? the data is uploaded to an internal table and then based on loop at that itab the conditions will evaluate to give the result.... but the problem is like wen the data is given in small letters the worste(last) condition is executing even the data satisfies the condtion which is not supposed to happen. this is due to case sensitive problem ...can u pls help me ....can the case be changed while uploading the data r after uploading ????

this is the itab declaration ..
data: begin of it_input occurs 0 ,
       tra          like tstc-tcode,
     end of it_input.
and then from the uploaded data the prog should check wheather it is having any userexits or not ...
here comes the code...
sort it_input by tra.
delete adjacent duplicates from it_input .
loop at it_input.
           it_itab-sno = sy-tabix.
select single * from tstc where tcode eq it_input-tra.
if sy-subrc eq 0.
    select single devclass from tadir into v_devclass
             where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
         if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
         move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
       if sy-subrc = 0.
        select single * from tstct where sprsl eq sy-langu and
                                        tcode eq it_input-tra.
                  if not jtab[] is initial.
           loop at jtab.
                select single modtext from modsapt into str
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                it_itab-tra        = it_input-tra.
                it_itab-i_obj_name = jtab-obj_name.
                it_itab-i_modtext = str.
                append it_itab.
                str = ''.
           endloop.
          endif.
        else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'No user Exit exists'.
                 append it_itab.
        endif.
      else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'Transaction Code Does Not Exist'.
                 append it_itab.
      endif.
endloop.

Can the resolution be changed when taking a photo. When I take a photo it is always 1MEG or more. Like to reduce this so that the photos are easily e-mailed. Any help?

Can the resolution be changed when taking a photo. When I take a photo it is always 1MEG or more. Like to reduce this so that the photos are easily e-mailed. Any help?

When you email a picture from Photos, you can choose the size.
http://i1224.photobucket.com/albums/ee374/Diavonex/3bec08e4423ac97de93d4560186b6 daf.jpg

Hi, after submission of the form, can the respondents make changes to their answers and submit the form again without completing every single question?

Hi there,
After submission of the form, can the respondents make changes to their answers and submit the form again without completing every single question?
Thanks for your help
Paline

Hi Paline,
Unfortunately this cannot be done.However, being the author of the form you can make the required changes in the response file.
Thanks,
Vikrantt Singh

Discussion_ dbsid user - can the password be changed

I have installed OCS as a single server install and have been configuring Oracle Mail and Discussions.
I would like the discussions to be visible through a Novell Groupwise client.
To date I have managed to get my inbox and any other mail folders to display using IMAP and I can send and receive e-mail through this service.
I cannot get the discussions to display as a shared folder. I have created the IMAP entry but have been unable to authorise against the mailstore. they are perfectly visible through the Oracle Web Client.
I am wondering whether the discussion_<dbsid> user needs to accessed, via an alias (I set this in the forum properties) unfortunately I do not know the password.
I do not want to go ahead and change discussion_<dbsid> password as I am not sure if there are side affects and I do not want to reinstall. Is is safe to change this password?
Does anyone know the default construction of this password, I believe it is randomized on creation?
Has anyone experience with changing this password?
Is it safe to do?
Is there any documentation regarding this user other than chapter 5 of Mail Administrators guide and installation notes?
Any help would be appreciated.

Roedmario wrote:
but then, basically, the password protection is worthless..?
Nope, not at all. When they restored your phone, all data on your phone was erased. So, passcode protecting your phone did its job...protected your data...that's its purpose.

Ocr question - after ocr text still displays the way it was before - can the letters be changed?

hi!
i have a question regarding ocr.
the function works perfect but after ocr the letters still get displayed the way they looked from scanning.
is there a way the replace the (recognised) letters by a vector font?
shouldnt be a problem as the letter recognition worked .
cheers
frank

It would be helpful if you'd tell us what version of Acrobat you're using. The names and locations of the commands move with different versions.
The option you want is called ClearScan.
This method synthesizes a new Type 3 font that closely approximates the original, and preserves the page background using a low-resolution copy.

Can the Picture Frame change rate slow down?

Twenty seconds is *way* too fast but appears to be the slowest it goes. Ideally something like twenty *minutes* is what I'm after.

Yes, I saw that slideshow feature in Photos so was disappointed to find that the Picture Frame feature is simply the very same thing! While I would agree with Apple that 20 sec is probably ok for a slideshow, where the user is concentrating on the screen and actively *watching* it, a picture frame is entirely different, it's just glanced at occassionally. A picture frame that flashes up a different shot every 20 secs is very distracting.
I suppose there is the solution of using lots of duplicates of each shot in an album to extend the time each is on screen, but even a 10 minute duration would need 30 copies of every image!
Thanks again, I'm back to the App store now [even that is not straightforward - trying to find a photo app that is not all about adding tacky effects shouldn't be so hard. ]

My Daugther went to a local Church fair and she had her iPod touch and it flew out but the screen didn't crack the ear jack is dent and the screen is popping out , But it works fine . Can the apple store change it or fix it?

Thanks , to anybody that answers

They will just exchange it ($149 for latest 8G model) for a rebuilt one--they won't repair that. Make sure you back it up before you take it in.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Question over the appraisal status change

Dear All,
Our appraisal has ( following the flexible template ) has planning, mid year review and final phases. With in each main status we have sub status configured. Example - In the planning stage ( say in the month of February ) , employee add objectives, change weights etc and send to manager for approval. If manager approves, the document status will be changed from planning to mid year status and employee's form is changed to the display mode ( so he cannot update objectives / weight etc)
Then again in the mid year status ( say a few months later - June ist ), the employee needs to review the appraisal, add or update the objectives etc and submit for manager approval.
My issue is - After the employee's appraisal form is changed to display only from planning to review status - How the employee's appraisal form can be changed from a read only to change mode in the same status ? As it is necessary for employee to add/ update in the form.
I am seeking the best approaches for the below as I am considering two options ( as mentioned below )
1) For the mid year status , I will configure a sub status ( called start mid year ) and attach a push button. The employee select the push button during the mid year period ( say June 1st ) and this push button triggers the status change from Mid year to Mid Year / Start Mid year. We also plan to apply a custom implementation for BADI for column access and badi (HRHAP00_COL_ACCESS) will decide the access control for columns etc.
2) The other approach I am considering is we are considering a workflow (INFO_APPRAISEE_CHANGE_REVIEW ) to notify th employee 7 days before the mid year review starts. Can this workflow trigger the status change or read the column access from the BADI (HRHAP00_COL_ACCESS) ?
Any other simpler approaches ?
I saw in the Process config ( tabs and process ) that we can define the phase with dates and status / substatus etc. Can this be useful for the above scenario. For eg. On June 1st when the mid year review start, can the status be changed like from Mid year to Mid Year / Start Mid year ?
Please let me know . Greatly Appreciated!
Aneez Hameed

Hi Aneez, both options are great, HRHAP00_COL_ACCESS is configurable at each sub-status, so you have many options. You can have the manager "approve" at beginning of year, but keep it in "in planning" by having a 3rd sub-status.
You can have the employee or manager have access to the pushbutton so that mid-term can start.
you can also do a workflow option where it is changed automatically, your option 2.
the final option is the HR adminstrator can change the status, by doing a mass select in phap_admin and then they change to the status to move it to "in review" with all of your mid-term substatuses.
they key to making this work is the additional config that goes along with HRHAP00_COL_ACCESS. here you will want to do define a Z table with the following columns:
object id - your template ID
role - which are the same roles values defined at your template - apee for apraisee
template status - integer - represents status ID
template sub-status - ID
column id - FAPP, OBJO, etc..
availability indicator (char) - here you will configure H, X etc... which the badi uses to know how to handle it.
best regards - michael

OC: can change multiplier but NOT the FSB on K7N2 Delta ILSR XP1800+ TB 'A'

I have had a good look at the various threads in the forum which to be honest confused me a bit more. I explain.
The good news (for me): so far I have successfully changed the clock speed of a Thoroughbred 'A' XP1800+ on a K7N2 Delta board. Default is 11.5 but 12.5 or 8 are working fine. On 12.5 the mobo recognises the cpu as a XP2000+.
The bad news: I cannot change the FSB from 133 to anything else even in Advanced Chipset Features, manual, high performance settings. Not even a lower one works for this setup. As said above, the multiplier however IS reasonably overclockable - the system simply won't let me change the default FSB of 133.
As far as I understand it, the 1800+ is unlocked even in its TB 'A' version. So the 'wire trick' won't help me I guess.
The fairly low spec AGP card? If so then a lower FSB should be possible.
The memory should be fine, it's CL2.5 Crucial PC2700 333 DDR.
BTW: I don't think the PSU is the problem here. I had a 380W PSU in there (noisy although named silent!) which didn't change a thing.
Any help or thoughts greatly appreciated!
Cheers
Chris

I unplugged psu, cleared cmos, applied default bios values. Then as suggested set multiplier to auto (H/W), reboot, and set the cpu/fsb interface back to Manual.
And it worked! Crazy. The system must have been stuck in some kind of loop... anyway, thanks very much Wonkanoby for your help!
After sorting this prob, I gradually raised the FSB to 166 while decreasing the multiplier to 9.5 = 1577MHz. Temps didn't chage a bit which makes sense for the cpu but I expected the northbridge chip to get a bit warmer. Don't know about memory.
Does any of you have experience with OC a Thoroughbred 'A'? I assume it is less OC'able than a type 'B'.
Or in other words: where's the limit?
Cheers
Chris

When I use Firefox and Hotmail at startup, Firefox freezes for about 1 minute, and then I can continue. First I though it was my computer but 2 other girls in my class have the same problem with Hotmail and Firefox. What can I do to change this?

When I start Firefox, about 15 seconds after I start it, my Firefox freezes for about 1 minute. I found out that it is my Hotmail that makes Firefox freeze.
First I thought it was my computer, but I have 2 other girls in my class that use Hotmail and Firefox and their computer also freezes for 1 full minute.
This is very annoying, what can I do to change this?
xxx ellen
p.s. I am from the Netherlands, maybe that has something to do with it?

Try deleting cookies and cache:
1. Tools| Clear recent history
2. Time range to clear: Everything
3. If it isn't already selected, select '''Cookies''' and '''Cache'''
4. '''Clear now'''
'''Check cookie exceptions'''
1. Tools | Options | Privacy Panel
2. Set '''Firefox will: Use custom settings for history.''' '''Insure Accept cookies for sites and accept third-party cookies''' is selected
3. Click '''Exceptions'''. If the misbehaving site is in that list, select it and click '''Remove site'''
'''Safe Mode'''
Add-ons can cause problems with not being able to log into certain websites. To see if this is the case with your issue, run [[Safe mode]]. When you get to the safe mode window, select Continue in Safe Mode. If this resolves your problem, see [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Also see [[Updating Firefox]] and [[Cannot log in to websites]]

Can the genre of a song or album in my itunes library be changed? While loading to the itunes library, or after the song or album has been loaded?

Can the genre of a song or album in my itunes library be changed? While loading to the itunes library, or after the song or album has been loaded?

Kay -
Glad it helped. Enjoy the music!
Ed

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out.

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

KM4M-L Can the FSB be changed???

Similar Messages

Maybe you are looking for