KM4M-L Cpu power socket

First time i have used this board.
The PC I am upgrading has no output to the monitor but the CPU fan powers up.
Does it need the the CPU power socket on the motherboard to be powered for the computer to boot.
The current cases powersupply doesnt have the 4pined connector, as its the 1st time ive used this board i am unsure if this is the cause of my problem
cheers

Your reply didnt really answer my question, of does the CPU power supply connector need to be powered?
the basic specs are
KM4M-L motherboard
AMD 1800 Duron
using onbaord graphics and sound
256MB kingstone 266DDR ram
20GB Seagate HD
52x CD Drive
300w max power supply. im not infront of it to find the specs of the individual voltage lines.
cheers

Similar Messages

MSI P7N SLI Platinum CPU Power Socket

I have a MSI P7N SLI Platinum and I just noticed I dont have a 8pin power plug on my ATX PSU ( this PSU is in my AMD rig)
I've just had a go of trying out my MSI P7N SLI Platinum board as a computer shop said just insert the 4 pin plug you used on your AMD board near the CPU..
I questioned him about it leaving 4 sockets bare, he said it would be fine..
Well I've tried booting up the rig and I get nothing on the screen (No Signal ) checked all sockets (graphics card, cpu)
I do get a little red and blue light on the board and the CPU fan and graphics fan are running fine,, but no signal...
I'm using a Intel Pentium 4, 2.8 GHz Processor Socket 775 which I know is fine,,,
Any views on this "you can use a 4pin plug on the 8pin CPU power socket " ?
Could this be the reason my rig is not booting ?
THanks

"Any views on this "you can use a 4pin plug on the 8pin CPU power socket " ?"
Yes you can. Make sure that 4pin cable is connected properly at correct side of 8pin socket.
"Could this be the reason my rig is not booting ?"
Nop. You can plug 8pin CPU cable if you want to test opposite Should boot with both 4 or 8.
Read >>Posting Guide<<

MSI-6738 KM2M Combo L CPU power socket (4 wires)

Just a quick question. I just bought this board and it has a 4 wire connector next to the ATX power connector and my power supply does not have the 4 wire cpu power connector. Do I need to buy another power supply, or can I use the existing one and just use the ATX power cable. will this do any damage to the CPU and or power supply.
Thanks.

i have asked a lot of people and thay have all told me theat you have to have the 4-pin plug conected. but i was faced with the same ishow my psu dosnt have the plug. i didnt have anuff cash at the time to get a new psu so i just pluged then the atx power plug and it has worked fine boots fine and runs stable. then i talked my uncle in to buying then same board and he got a new case wen he got it the psu that came in his case hase the 4-pin power plug so i pluged it in wen i put it together and has workes fine to. so ovisly you dont have to have then plug even thow it is recomended y duse the board have the plug and can or will it hurt my componets if i use the board without it if you have any comenta please e-mail me at [email protected] thnx

Kernel_task problem on MBP 8,2 eating up huge CPU power, and messed up Ethernet.

Hello.
After using resource-intensive apps like VMware, I find that kernel_task is gobbling up lots of CPU power, causing my fans to keep spinning at high speeds even after VMware has been shut down for over half an hour.
The same thing happens after using BlueStacks.
PS some places are telling me that it could be a faulty temperature sensor, but I can't confirm this as Apple Hardware Test just wouldn't load up on my MBP.
I have provided two images showing Activity Monitor and iStat.
EDIT: This problem has also prevented me from connecting to the web via Ethernet. Attempts to disconnect from Ethernet has also failed. The Ethernet status in the menu bar keeps saying 'disconnecting…' for several minutes, but to no avail.
Note: This is on an early-2011 15" MBP, 2.3GHz i7, 8GB RAM.
Is there any way to solve this problem?
Thanks in advance.

Okay, here's the log. The kernel_task started hogging CPU power the moment I connected to my PPPoE service via Ethernet:
02/09/2012 15:59:07.000
bootlog[0]
BOOT_TIME 1346572747 0
02/09/2012 15:59:18.000
kernel[0]
PMAP: PCID enabled
02/09/2012 15:59:18.000
kernel[0]
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
02/09/2012 15:59:18.000
kernel[0]
vm_page_bootstrap: 2004996 free pages and 75772 wired pages
02/09/2012 15:59:18.000
kernel[0]
kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000]
02/09/2012 15:59:18.000
kernel[0]
zone leak detection enabled
02/09/2012 15:59:18.000
kernel[0]
standard timeslicing quantum is 10000 us
02/09/2012 15:59:18.000
kernel[0]
standard background quantum is 2500 us
02/09/2012 15:59:18.000
kernel[0]
mig_table_max_displ = 74
02/09/2012 15:59:18.000
kernel[0]
TSC Deadline Timer supported and enabled
02/09/2012 15:59:18.000
kernel[0]
corecrypto kext started!
02/09/2012 15:59:18.000
kernel[0]
Running kernel space in FIPS MODE
02/09/2012 15:59:18.000
kernel[0]
Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
02/09/2012 15:59:18.000
kernel[0]
Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS integrity POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS AES CBC POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS TDES CBC POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS AES ECB AESNI POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS AES XTS AESNI POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS SHA POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS HMAC POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS ECDSA POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS DRBG POST test passed!
02/09/2012 15:59:18.000
kernel[0]
corecrypto.kext FIPS POST passed!
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
02/09/2012 15:59:18.000
kernel[0]
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
02/09/2012 15:59:18.000
kernel[0]
calling mpo_policy_init for TMSafetyNet
02/09/2012 15:59:18.000
kernel[0]
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
02/09/2012 15:59:18.000
kernel[0]
calling mpo_policy_init for Sandbox
02/09/2012 15:59:18.000
kernel[0]
Security policy loaded: Seatbelt sandbox policy (Sandbox)
02/09/2012 15:59:18.000
kernel[0]
calling mpo_policy_init for Quarantine
02/09/2012 15:59:18.000
kernel[0]
Security policy loaded: Quarantine policy (Quarantine)
02/09/2012 15:59:18.000
kernel[0]
Copyright (c) 1982, 1986, 1989, 1991, 1993
02/09/2012 15:59:18.000
kernel[0]
The Regents of the University of California. All rights reserved.
02/09/2012 15:59:18.000
kernel[0]
MAC Framework successfully initialized
02/09/2012 15:59:18.000
kernel[0]
using 16384 buffer headers and 10240 cluster IO buffer headers
02/09/2012 15:59:18.000
kernel[0]
IOAPIC: Version 0x20 Vectors 64:87
02/09/2012 15:59:18.000
kernel[0]
ACPI: System State [S0 S3 S4 S5] (S3)
02/09/2012 15:59:18.000
kernel[0]
PFM64 (36 cpu) 0xf10000000, 0xf0000000
02/09/2012 15:59:18.000
kernel[0]
[ PCI configuration begin ]
02/09/2012 15:59:18.000
kernel[0]
AppleIntelCPUPowerManagement: Turbo Ratios 88AB
02/09/2012 15:59:18.000
kernel[0]
AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
02/09/2012 15:59:18.000
kernel[0]
console relocated to 0xf60010000
02/09/2012 15:59:18.000
kernel[0]
PCI configuration changed (bridge=16 device=5 cardbus=0)
02/09/2012 15:59:18.000
kernel[0]
[ PCI configuration end, bridges 12 devices 18 ]
02/09/2012 15:59:18.000
kernel[0]
FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe81c7a8; max speed s800.
02/09/2012 15:59:18.000
kernel[0]
mbinit: done [96 MB total pool size, (64/32) split]
02/09/2012 15:59:18.000
kernel[0]
Pthread support ABORTS when sync kernel primitives misused
02/09/2012 15:59:18.000
kernel[0]
rooting via boot-uuid from /chosen: 26EE8AAD-DFBC-399D-8F6E-B825F8A84EEC
02/09/2012 15:59:18.000
kernel[0]
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
02/09/2012 15:59:18.000
kernel[0]
com.apple.AppleFSCompressionTypeZlib kmod start
02/09/2012 15:59:18.000
kernel[0]
com.apple.AppleFSCompressionTypeDataless kmod start
02/09/2012 15:59:18.000
kernel[0]
Error 2 registering socket filter (com.symantec.fw.ac.at). Your computer may not be fully protected.
02/09/2012 15:59:18.000
kernel[0]
com.apple.AppleFSCompressionTypeZlib load succeeded
02/09/2012 15:59:18.000
kernel[0]
com.apple.AppleFSCompressionTypeDataless load succeeded
02/09/2012 15:59:18.000
kernel[0]
AppleIntelCPUPowerManagementClient: ready
02/09/2012 15:59:18.000
kernel[0]
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HTS725050A9A362 Media/IOGUIDPartitionScheme/Customer@2
02/09/2012 15:59:18.000
kernel[0]
BSD root: disk0s2, major 1, minor 1
02/09/2012 15:59:18.000
kernel[0]
BTCOEXIST off
02/09/2012 15:59:18.000
kernel[0]
BRCM tunables:
02/09/2012 15:59:18.000
kernel[0]
pullmode[1] txringsize[ 256] reapmin[   32] reapcount[ 128]
02/09/2012 15:59:18.000
kernel[0]
highWaterMark: VO[ 192] VI[ 192] BE[ 192] BK[ 192]
02/09/2012 15:59:18.000
kernel[0]
Kernel is LP64
02/09/2012 15:59:18.000
kernel[0]
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
02/09/2012 15:59:08.672
com.apple.launchd[1]
*** launchd[1] has started up. ***
02/09/2012 15:59:08.672
com.apple.launchd[1]
*** Shutdown logging is enabled. ***
02/09/2012 15:59:18.062
com.apple.launchd[1]
(com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
02/09/2012 15:59:32.855
hidd[47]
Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
02/09/2012 15:59:33.000
kernel[0]
macx_swapon SUCCESS
02/09/2012 15:59:34.000
kernel[0]
BCM5701Enet: Ethernet address c8:2a:14:26:41:68
02/09/2012 15:59:34.000
kernel[0]
AirPort_Brcm4331: Ethernet address e4:ce:8f:02:e2:6e
02/09/2012 15:59:34.000
kernel[0]
IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
02/09/2012 15:59:34.000
kernel[0]
IO80211Interface::efiNVRAMPublished():
02/09/2012 15:59:34.165
Extractor[64]
Starting Extractor Daemon Mode.
02/09/2012 15:59:35.814
kdc[45]
label: default
02/09/2012 15:59:35.815
kdc[45]
dbname: od:/Local/Default
02/09/2012 15:59:35.815
kdc[45]
mkey_file: /var/db/krb5kdc/m-key
02/09/2012 15:59:35.815
kdc[45]
acl_file: /var/db/krb5kdc/kadmind.acl
02/09/2012 15:59:36.000
kernel[0]
Waiting for DSMOS...
02/09/2012 15:59:36.210
Symantec Error Reporting[63]
Symantec Error Reporting Daemon launched.
02/09/2012 15:59:36.819
hidd[47]
void __IOHIDLoadBundles(): Loaded 0 HID plugins
02/09/2012 15:59:36.821
mDNSResponder[39]
mDNSResponder mDNSResponder-379.27.1 (Aug 1 2012 20:12:04) starting OSXVers 12
02/09/2012 15:59:36.846
appleeventsd[53]
main: Starting up
02/09/2012 15:59:36.852
airportd[69]
_processDLILEvent: en1 attached (down)
02/09/2012 15:59:36.900
com.apple.usbmuxd[27]
usbmuxd-268.5 on Apr 5 2012 at 15:33:48, running 64 bit
02/09/2012 15:59:37.000
kernel[0]
createVirtIf(): ifRole = 1
02/09/2012 15:59:37.000
kernel[0]
in func createVirtualInterface ifRole = 1
02/09/2012 15:59:37.000
kernel[0]
AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8014146c00
02/09/2012 15:59:37.000
kernel[0]
AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
02/09/2012 15:59:37.000
kernel[0]
Created virtif 0xffffff8014146c00 p2p0
02/09/2012 15:59:37.665
coreservicesd[65]
FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
02/09/2012 15:59:37.000
kernel[0]
AGC: 3.2.6, HW version=1.9.23, flags:0, features:20600
02/09/2012 15:59:37.000
kernel[0]
Previous Shutdown Cause: 5
02/09/2012 15:59:37.000
kernel[0]
IOBluetoothUSBDFU::probe
02/09/2012 15:59:37.000
kernel[0]
IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
02/09/2012 15:59:37.000
kernel[0]
[BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
02/09/2012 15:59:37.000
kernel[0]
ACPI_SMC_PlatformPlugin::initFanThrottleControl - waiting for AppleSMC
02/09/2012 15:59:37.806
com.apple.kextd[12]
Can't load /System/Library/Extensions/iavkfs.kext - no code for running kernel's architecture.
02/09/2012 15:59:37.812
com.apple.kextd[12]
Load com.pctools.iantivirus.kfs failed; removing personalities from kernel.
02/09/2012 15:59:37.845
com.apple.kextd[12]
Can't load /System/Library/Extensions/iavkfs.kext - no code for running kernel's architecture.
02/09/2012 15:59:37.940
com.apple.kextd[12]
Load com.pctools.iantivirus.kfs failed; removing personalities from kernel.
02/09/2012 15:59:38.000
kernel[0]
[AGPM Controller] build GPUDict by Vendor1002Device6741
02/09/2012 15:59:38.000
kernel[0]
DSMOS has arrived
02/09/2012 15:59:38.000
kernel[0]
[IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
02/09/2012 15:59:38.000
kernel[0]
[IOBluetoothHCIController][start] -- completed
02/09/2012 15:59:38.000
kernel[0]
[IOBluetoothHCIController::setConfigState] calling registerService
02/09/2012 15:59:38.687
com.apple.SecurityServer[15]
Session 100000 created
02/09/2012 15:59:39.166
mds[38]
(Normal) FMW: FMW 0 0
02/09/2012 15:59:39.169
WindowServer[80]
Server is starting up
02/09/2012 15:59:39.172
WindowServer[80]
Session 256 retained (2 references)
02/09/2012 15:59:39.172
WindowServer[80]
Session 256 released (1 references)
02/09/2012 15:59:39.178
WindowServer[80]
Session 256 retained (2 references)
02/09/2012 15:59:39.559
WindowServer[80]
init_page_flip: page flip mode is on
02/09/2012 15:59:39.560
WindowServer[80]
init_resolution: resolution is enabled
02/09/2012 15:59:40.000
kernel[0]
AirPort: Link Down on en1. Reason 1 (Unspecified).
02/09/2012 15:59:40.000
kernel[0]
en1::IO80211Interface::postMessage bssid changed
02/09/2012 15:59:40.000
kernel[0]
AppleLMUController found an AG vendor product (0x9cb7), notifying SMC.
02/09/2012 15:59:40.341
configd[18]
network changed.
02/09/2012 15:59:40.342
configd[18]
setting hostname to "Yung-Ju-Chuas-MacBook-Pro.local"
02/09/2012 15:59:42.000
kernel[0]
Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,45e1,0000]
02/09/2012 15:59:42.228
WindowServer[80]
mux_initialize: Mode is dynamic
02/09/2012 15:59:42.240
WindowServer[80]
GLCompositor enabled for tile size [256 x 256]
02/09/2012 15:59:42.240
WindowServer[80]
CGXGLInitMipMap: mip map mode is on
02/09/2012 15:59:42.250
WindowServer[80]
WSMachineUsesNewStyleMirroring: false
02/09/2012 15:59:42.250
WindowServer[80]
Display 0x04272dc0: GL mask 0x9; bounds (0, 0)[1680 x 1050], 51 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cb7, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cb70000000004272dc0
02/09/2012 15:59:42.250
WindowServer[80]
Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
02/09/2012 15:59:42.250
WindowServer[80]
Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
02/09/2012 15:59:42.257
WindowServer[80]
Created shield window 0x5 for display 0x04272dc0
02/09/2012 15:59:42.257
WindowServer[80]
Created shield window 0x6 for display 0x003f003e
02/09/2012 15:59:42.257
WindowServer[80]
Created shield window 0x7 for display 0x003f003d
02/09/2012 15:59:42.261
WindowServer[80]
Display 0x04272dc0: GL mask 0x9; bounds (0, 0)[1680 x 1050], 51 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cb7, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cb70000000004272dc0
02/09/2012 15:59:42.262
WindowServer[80]
Display 0x003f003e: GL mask 0x4; bounds (2704, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
02/09/2012 15:59:42.262
WindowServer[80]
Display 0x003f003d: GL mask 0x2; bounds (2705, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
02/09/2012 15:59:42.262
WindowServer[80]
CGXPerformInitialDisplayConfiguration
02/09/2012 15:59:42.262
WindowServer[80]
Display 0x04272dc0: MappedDisplay Unit 0; Alias(0, 0x9); Vendor 0x610 Model 0x9cb7 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[1680 x 1050], Rotation 0, Resolution 1
02/09/2012 15:59:42.262
WindowServer[80]
Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2704,0)[1 x 1], Rotation 0, Resolution 1
02/09/2012 15:59:42.262
WindowServer[80]
Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2705,0)[1 x 1], Rotation 0, Resolution 1
02/09/2012 15:59:42.262
WindowServer[80]
CGXMuxBoot: Boot normal
02/09/2012 15:59:42.326
WindowServer[80]
GLCompositor: GL renderer id 0x01021b06, GL mask 0x00000007, accelerator 0x00003d63, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
02/09/2012 15:59:42.326
WindowServer[80]
GLCompositor: GL renderer id 0x01021b06, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
02/09/2012 15:59:42.326
WindowServer[80]
GLCompositor: GL renderer id 0x01024301, GL mask 0x00000008, accelerator 0x00004477, unit 3, caps QEX|QGL|MIPMAP, vram 451 MB
02/09/2012 15:59:42.327
WindowServer[80]
GLCompositor: GL renderer id 0x01024301, GL mask 0x00000008, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
02/09/2012 15:59:42.338
WindowServer[80]
Unable to open IOHIDSystem (e00002bd)
02/09/2012 15:59:42.000
kernel[0]
virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
02/09/2012 15:59:44.258
WindowServer[80]
**DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
02/09/2012 15:59:44.284
WindowServer[80]
Received display connect changed for display 0x4272dc0
02/09/2012 15:59:44.324
WindowServer[80]
CGXMuxAcknowledge: Posting glitchless acknowledge
02/09/2012 15:59:44.342
WindowServer[80]
Received display connect changed for display 0x4272dc0
02/09/2012 15:59:44.342
WindowServer[80]
Received display connect changed for display 0x3f003d
02/09/2012 15:59:44.342
WindowServer[80]
Received display connect changed for display 0x3f003e
02/09/2012 15:59:44.687
com.apple.SecurityServer[15]
Entering service
02/09/2012 15:59:44.714
systemkeychain[71]
done file: /var/run/systemkeychaincheck.done
02/09/2012 15:59:44.724
configd[18]
network changed: DNS*
02/09/2012 15:59:44.727
kdc[45]
WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
02/09/2012 15:59:44.727
mDNSResponder[39]
D2D_IPC: Loaded
02/09/2012 15:59:44.727
mDNSResponder[39]
D2DInitialize succeeded
02/09/2012 15:59:44.740
Symantec Error Reporting[63]
Symantec Error Reporting Daemon beginning submission for domain local-domain.
02/09/2012 15:59:44.741
Symantec Error Reporting[63]
Symantec Error Reporting Daemon: Submitting 0 error reports.
02/09/2012 15:59:44.741
Symantec Error Reporting[63]
Symantec Error Reporting Daemon: Submitting 2 reports.
02/09/2012 15:59:44.778
netbiosd[81]
Unable to start NetBIOS name service:
02/09/2012 15:59:45.077
Extractor[64]
Profile: npfmac4
02/09/2012 15:59:45.077
Extractor[64]
Could not upload /var/tmp/tmp.0.LSxwVC. Error: [Login Error: Could not resolve host: upload4.symantec.com; nodename nor servname provided, or not known]
02/09/2012 15:59:45.957
UserEventAgent[11]
Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
02/09/2012 15:59:46.180
kdc[45]
KDC started
02/09/2012 15:59:46.363
awacsd[57]
Starting awacsd connectivity-77 (Jun 20 2012 15:40:49)
02/09/2012 15:59:46.366
awacsd[57]
InnerStore CopyAllZones: no info in Dynamic Store
02/09/2012 15:59:46.460
sudo[117]
    root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
02/09/2012 15:59:47.177
loginwindow[42]
Login Window Application Started
02/09/2012 15:59:47.191
loginwindow[42]
**DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
02/09/2012 15:59:48.398
WindowServer[80]
Created shield window 0x8 for display 0x04272dc0
02/09/2012 15:59:48.398
WindowServer[80]
Display 0x04272dc0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
02/09/2012 15:59:48.412
WindowServer[80]
Display 0x04272dc0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
02/09/2012 15:59:49.781
SymSharedSettingsd[124]
Settings server starting up.
02/09/2012 15:59:49.849
digest-service[112]
label: default
02/09/2012 15:59:49.849
digest-service[112]
dbname: od:/Local/Default
02/09/2012 15:59:49.849
digest-service[112]
mkey_file: /var/db/krb5kdc/m-key
02/09/2012 15:59:49.849
digest-service[112]
acl_file: /var/db/krb5kdc/kadmind.acl
02/09/2012 15:59:49.852
digest-service[112]
digest-request: uid=0
02/09/2012 15:59:49.873
rpcsvchost[125]
sandbox_init: com.apple.msrpc.netlogon.sb succeeded
02/09/2012 15:59:49.877
digest-service[112]
digest-request: init request
02/09/2012 15:59:49.880
digest-service[112]
digest-request: init return domain: BUILTIN server: YUNG-JU-CHUAS-MACBOOK-PRO
02/09/2012 15:59:50.058
SymDaemon[60]
+++ SymLM::SkuKey 0x10251a150 (# 1) - 1 alive +++
02/09/2012 15:59:50.476
locationd[43]
NOTICE,Location icon should now be in state 0
02/09/2012 15:59:50.788
coreaudiod[103]
2012-09-02 03:59:50.787831 PM [AirPlay] Started browsing for _airplay._tcp.
02/09/2012 15:59:50.789
coreaudiod[103]
2012-09-02 03:59:50.788665 PM [AirPlay] Started browsing for _raop._tcp.
02/09/2012 15:59:51.316
WindowServer[80]
Display 0x04272dc0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
02/09/2012 15:59:51.332
launchctl[129]
com.apple.findmymacmessenger: Already loaded
02/09/2012 15:59:51.352
com.apple.SecurityServer[15]
Session 100004 created
02/09/2012 15:59:51.563
hidd[47]
CGSShutdownServerConnections: Detaching application from window server
02/09/2012 15:59:51.563
hidd[47]
CGSDisplayServerShutdown: Detaching display subsystem from window server
02/09/2012 15:59:51.666
ALSPlugin 235.55[47]
Failed to get brightness for displayID 0x04272dc0
02/09/2012 15:59:52.287
UserEventAgent[131]
cannot find useragent 1102
02/09/2012 15:59:52.288
loginwindow[42]
Login Window Started Security Agent
02/09/2012 15:59:53.034
WindowServer[80]
3891612: App SecurityAgent cannot order in untagged windows before login.
02/09/2012 15:59:53.034
WindowServer[80]
kCGErrorInvalidOperation: CGXOrderWinsAndPanels: error ordering window
02/09/2012 15:59:54.825
SymDaemon[60]
ZSharedObject::Attach - 0x100525a70 already deleted - BACKTRACE:
02/09/2012 15:59:55.601
DictationIM[143]
3891612: (connect_and_check) Untrusted apps are not allowed to connect to or launch Window Server before login.
02/09/2012 15:59:55.601
DictationIM[143]
Window Server is not available.
02/09/2012 15:59:55.601
DictationIM[143]
Window Server is not available.
02/09/2012 15:59:55.601
DictationIM[143]
Window Server is not available.
02/09/2012 15:59:55.601
DictationIM[143]
Window Server is not available.
02/09/2012 15:59:55.630
SecurityAgent[138]
This is the first run
02/09/2012 15:59:55.631
SecurityAgent[138]
MacBuddy was run = 0
02/09/2012 15:59:55.665
SecurityAgent[138]
spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
02/09/2012 15:59:55.665
SecurityAgent[138]
spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
02/09/2012 15:59:55.992
SymDaemon[60]
0   SymBase                             0x0000000100038bc0 _ZN13ZSharedObject6AttachEv + 74
02/09/2012 15:59:55.992
SymDaemon[60]
1   SymSharedSettings                   0x00000001000a6760 _ZNK6SymSS29ZssObject11DescriptionEPc + 1800
02/09/2012 15:59:55.993
SymDaemon[60]
2   SymSharedSettings                   0x000000010009ecac _ZN6SymSS29ZssStDataC1EPKcm + 716
02/09/2012 15:59:55.993
SymDaemon[60]
3   SymSharedSettings                   0x000000010009adf2 _ZN6SymSS213ZssConnection19OpenOrCreateSettingEPPNS_12ZssContainerEjPKcj + 508
02/09/2012 15:59:55.993
SymDaemon[60]
4   SymPersonalFirewall                 0x0000000102798b63 _ZN5SymFW16AutoSetupCluster4copyEPN6SymSS213ZssConnectionEj + 201
02/09/2012 15:59:55.993
SymDaemon[60]
5   SymAutoSetup                        0x00000001004d5492 AutoSetupDaemonPlugInFactory + 12439
02/09/2012 15:59:55.993
SymDaemon[60]
6   SymDaemon                           0x000000010000a449 main + 17446
02/09/2012 15:59:55.993
SymDaemon[60]
7   SymDaemon                           0x000000010000e7e2 main + 34751
02/09/2012 15:59:55.993
SymDaemon[60]
8   SymDaemon                           0x000000010000e8b7 main + 34964
02/09/2012 15:59:55.993
SymDaemon[60]
9   SymDaemon                           0x000000010000dc23 main + 31744
02/09/2012 15:59:55.993
SymDaemon[60]
10 SymBase                             0x0000000100045d60 _ZN12SymException14DispatchSync_fEP16dispatch_queue_sPvPFvS2_E + 56
02/09/2012 15:59:55.993
SymDaemon[60]
11 SymDaemon                           0x000000010000daa2 main + 31359
02/09/2012 15:59:55.993
SymDaemon[60]
12 SymDaemon                           0x000000010000a867 main + 18500
02/09/2012 15:59:55.993
SymDaemon[60]
13 SymBase                             0x000000010004366b _ZN12SymException13ExceptionDataD1Ev + 39
02/09/2012 15:59:55.993
SymDaemon[60]
14 libdispatch.dylib                   0x00007fff934cb0fa _dispatch_client_callout + 8
02/09/2012 15:59:55.993
SymDaemon[60]
15 libdispatch.dylib                   0x00007fff934cc4c3 _dispatch_queue_drain + 235
02/09/2012 15:59:55.993
SymDaemon[60]
16 libdispatch.dylib                   0x00007fff934cc335 _dispatch_queue_invoke + 52
02/09/2012 15:59:55.994
SymDaemon[60]
17 libdispatch.dylib                   0x00007fff934cc207 _dispatch_worker_thread2 + 249
02/09/2012 15:59:55.994
SymDaemon[60]
18 libsystem_c.dylib                   0x00007fff8cfe3ceb _pthread_wqthread + 404
02/09/2012 15:59:55.994
SymDaemon[60]
19 libsystem_c.dylib                   0x00007fff8cfce1b1 start_wqthread + 13
02/09/2012 15:59:57.665
com.apple.launchd[1]
(com.symantec.nav.migrateqtf) Bug: 12B19: launchd + 33673 [AEF41441-17BC-36E6-B1F8-57BADBDFEBCF]: 0x10000003
02/09/2012 15:59:58.312
SystemStarter[110]
StartOuc (116) did not complete successfully
02/09/2012 15:59:58.313
SystemStarter[110]
The following StartupItems failed to start properly:
02/09/2012 15:59:58.313
SystemStarter[110]
/Library/StartupItems/StartOuc
02/09/2012 15:59:58.313
SystemStarter[110]
- execution of Startup script failed
02/09/2012 15:59:58.441
configd[18]
subnet_route: write routing socket failed, Network is unreachable
02/09/2012 15:59:58.490
ReportCrash[147]
DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
02/09/2012 16:00:00.168
configd[18]
network changed: v4(en0+:169.254.35.103) DNS+ Proxy+ SMB
02/09/2012 16:00:01.368
awacsd[57]
Exiting
02/09/2012 16:00:01.404
configd[18]
setting hostname to "yung-ju-chuas-macbook-pro.local"
02/09/2012 16:00:23.007
ReportCrash[147]
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
02/09/2012 16:00:23.007
ReportCrash[147]
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
02/09/2012 16:00:23.007
ReportCrash[147]
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
02/09/2012 16:00:23.007
ReportCrash[147]
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
02/09/2012 16:00:23.008
ReportCrash[147]
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
02/09/2012 16:00:23.008
ReportCrash[147]
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
02/09/2012 16:00:23.008
ReportCrash[147]
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
02/09/2012 16:00:23.008
ReportCrash[147]
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
02/09/2012 16:00:23.008
ReportCrash[147]
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
02/09/2012 16:00:23.009
ReportCrash[147]
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
02/09/2012 16:00:23.111
com.apple.launchd[1]
(com.symantec.symdaemon[60]) Job appears to have crashed: Segmentation fault: 11
02/09/2012 16:00:24.122
SymDaemon[167]
+++ SymLM::SkuKey 0x102600080 (# 1) - 1 alive +++
02/09/2012 16:00:27.000
kernel[0]
Sandbox: sandboxd(168) deny mach-lookup com.apple.coresymbolicationd
02/09/2012 16:00:32.415
ReportCrash[147]
Saved crash report for SymDaemon[60] version 5.1 (3) to /Library/Logs/DiagnosticReports/SymDaemon_2012-09-02-160032_Yung-Ju-Chuas-MacBo ok-Pro.crash
02/09/2012 16:00:36.186
SecurityAgent[138]
User info context values set for yjchua
02/09/2012 16:00:37.410
SecurityAgent[138]
Login Window login proceeding
02/09/2012 16:00:38.351
loginwindow[42]
Login Window - Returned from Security Agent
02/09/2012 16:00:38.357
DictationIM[143]
Window Server is not available.
02/09/2012 16:00:38.357
DictationIM[143]
Window Server is not available.
02/09/2012 16:00:38.357
DictationIM[143]
Window Server is not available.
02/09/2012 16:00:38.357
DictationIM[143]
Window Server is not available.
02/09/2012 16:00:38.556
loginwindow[42]
USER_PROCESS: 42 console
02/09/2012 16:00:39.360
com.apple.launchd.peruser.501[176]
(com.BlueStacks.AppPlayer.LogRotator) Bug: 12B19: launchd + 101332 [AEF41441-17BC-36E6-B1F8-57BADBDFEBCF]: 0x16
02/09/2012 16:00:39.360
com.apple.launchd.peruser.501[176]
(com.BlueStacks.AppPlayer.Service) Bug: 12B19: launchd + 101332 [AEF41441-17BC-36E6-B1F8-57BADBDFEBCF]: 0x16
02/09/2012 16:00:39.360
com.apple.launchd.peruser.501[176]
(com.BlueStacks.AppPlayer.UpdaterAgent) Bug: 12B19: launchd + 101332 [AEF41441-17BC-36E6-B1F8-57BADBDFEBCF]: 0x16
02/09/2012 16:00:39.362
com.apple.launchd.peruser.501[176]
(com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
02/09/2012 16:00:39.367
loginwindow[42]
Connection with distnoted server was invalidated
02/09/2012 16:00:39.374
distnoted[179]
# distnote server agent absolute time: 92.947071690   civil time: Sun Sep 2 16:00:39 2012   pid: 179 uid: 501 root: no
02/09/2012 16:00:40.074
WindowServer[80]
**DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
02/09/2012 16:00:40.477
WindowServer[80]
Display 0x04272dc0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
02/09/2012 16:00:40.545
NetworkBrowserAgent[195]
Starting NetworkBrowserAgent
02/09/2012 16:00:41.354
com.apple.SecurityServer[15]
Session 100007 created
02/09/2012 16:00:41.671
Symantec Error Reporting[218]
Symantec Error Reporting Daemon launched.
02/09/2012 16:00:41.743
com.apple.launchd.peruser.501[176]
(com.apple.afpstat-qfa[215]) Exited with code: 2
02/09/2012 16:00:41.000
kernel[0]
CODE SIGNING: cs_invalid_page(0x1000): p=221[GoogleSoftwareUp] clearing CS_VALID
02/09/2012 16:00:41.978
coreservicesd[65]
SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationCreation to notificationID=134
02/09/2012 16:00:42.784
WindowServer[80]
CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
02/09/2012 16:00:44.371
Symantec Error Reporting[218]
Symantec Error Reporting Daemon beginning submission for domain current-user.
02/09/2012 16:00:44.372
Symantec Error Reporting[218]
Symantec Error Reporting Daemon: Submitting 0 error reports.
02/09/2012 16:00:44.372
Symantec Error Reporting[218]
Symantec Error Reporting Daemon: Nothing to submit.
02/09/2012 16:00:44.374
blued[166]
kBTXPCUpdateUserPreferences gConsoleUserUID = 501
02/09/2012 16:00:44.408
locationd[243]
NOTICE,Location icon should now be in state 0
02/09/2012 16:00:44.465
SocialPushAgent[202]
Error: unable to get the current device-token:(null) and/or the uuid:(null)
02/09/2012 16:00:44.467
SocialPushAgent[202]
Error: unable to get the current device-token:(null) and/or the uuid:(null)
02/09/2012 16:00:45.831
imagent[208]
[Warning] No service: removing this chat [IMDChat: 0xA392A9D0 GUID: Jabber;-;[email protected] Style: - Participants: (
    "[email protected]"
) Room Name: (null) Identifier: [email protected]]
02/09/2012 16:00:45.833
imagent[208]
[Warning] No service: removing this chat [IMDChat: 0xA392E140 GUID: Jabber;-;[email protected] Style: - Participants: (
    "[email protected]"
) Room Name: (null) Identifier: [email protected]]
02/09/2012 16:00:45.837
imagent[208]
[Warning] No service: removing this chat [IMDChat: 0xA3931180 GUID: Jabber;-;chat.facebook.com Style: - Participants: (
    "chat.facebook.com"
) Room Name: (null) Identifier: chat.facebook.com]
02/09/2012 16:00:45.841
imagent[208]
[Warning] No service: removing this chat [IMDChat: 0xA3936360 GUID: Jabber;-;[email protected] Style: - Participants: (
    "[email protected]"
) Room Name: (null) Identifier: [email protected]]
02/09/2012 16:00:45.843
imagent[208]
[Warning] No service: removing this chat [IMDChat: 0xA3937C10 GUID: Jabber;-;[email protected] Style: - Participants: (
    "[email protected]"
) Room Name: (null) Identifier: [email protected]]
02/09/2012 16:00:45.865
imagent[208]
[Warning] No service: removing this chat [IMDChat: 0xA3927690 GUID: Jabber;-;[email protected] Style: - Participants: (
    "[email protected]"
) Room Name: (null) Identifier: [email protected]]
02/09/2012 16:00:46.364
WindowServer[80]
reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 4.58 seconds (server forcibly re-enabled them after 1.00 seconds)
02/09/2012 16:00:46.424
CalendarAgent[212]
[com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fdd5e150b20 {NSUnderlyingError=0x7fdd5c61c0c0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://yjchua95%[email protected]/principals///yjchua95%[email protected]/principals/, NSErrorFailingURLKey=https://yjchua95%[email protected]/principals///yjchua95%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
02/09/2012 16:00:50.809
SystemUIServer[190]
*** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
02/09/2012 16:00:50.810
SystemUIServer[190]
*** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
02/09/2012 16:00:53.139
locationd[255]
NOTICE,Location icon should now be in state 0
02/09/2012 16:00:53.410
imagent[208]
[Warning] Bag loading failed! Error (NSURLErrorDomain:-1009): The Internet connection appears to be offline. http://init.ess.apple.com/WebObjects/VCInit.woa/wa/getBag?ix=1
02/09/2012 16:00:53.411
imagent[208]
[Warning] Bag loading failed! Error (NSURLErrorDomain:-1009): The Internet connection appears to be offline. http://init-p01md.apple.com/bag
02/09/2012 16:00:55.345
WindowServer[80]
CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
02/09/2012 16:00:55.452
WindowServer[80]
reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.11 seconds (server forcibly re-enabled them after 1.00 seconds)
02/09/2012 16:00:55.848
Adobe Reader Updater Helper[225]
Adobe Reader Updater encountered errorCode 260
02/09/2012 16:00:55.995
Adobe Reader Updater Helper[225]
Adobe Reader Updater encountered errorCode 1001
02/09/2012 16:01:03.974
assistantd[213]
<Error>: AceConnection - NSStreamEventErrorOccurred <__NSCFOutputStream: 0x7f921d5041e0>, error = Error Domain=kCFErrorDomainCFNetwork Code=2 "The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)" UserInfo=0x7f921ea138e0 {kCFGetAddrInfoFailureKey=8}, domain = kCFErrorDomainCFNetwork, code = 2
02/09/2012 16:01:03.000
kernel[0]
Symantec Vulnerability Protection loaded new signatures successfully.
02/09/2012 16:01:04.000
assistantd[213]
<Error>: Session - Connection error: <ADAceConnection: 0x7f921bc22fd0> Error Domain=kCFErrorDomainCFNetwork Code=2 "The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)" UserInfo=0x7f921ea152d0 {kCFGetAddrInfoFailureKey=8}
02/09/2012 16:01:04.001
assistantd[213]
<Error>: Daemon - Session Error Error Domain=kCFErrorDomainCFNetwork Code=2 "The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)" UserInfo=0x7f921ea152d0 {kCFGetAddrInfoFailureKey=8}
02/09/2012 16:01:05.620
configd[18]
SCNC: start, triggered by SystemUIServer, type PPPoE, status 0
02/09/2012 16:01:06.496
pppd[261]
pppd 2.4.2 (Apple version 596.13) started by yjchua, uid 501
02/09/2012 16:01:06.636
pppd[261]
PPPoE connecting to service 'Streamyx' [access concentrator '']...
02/09/2012 16:01:06.000
kernel[0]
PPPoE domain init
02/09/2012 16:01:07.129
pppd[261]
PPPoE connection established.
02/09/2012 16:01:07.132
pppd[261]
Connect: ppp0 <--> socket[34:16]
02/09/2012 16:01:07.931
pppd[261]
PAP authentication succeeded
02/09/2012 16:01:08.280
pppd[261]
local IP address 60.48.248.51
02/09/2012 16:01:08.281
pppd[261]
remote IP address 219.93.218.177
02/09/2012 16:01:08.281
pppd[261]
primary   DNS address 202.188.0.133
02/09/2012 16:01:08.281
pppd[261]
secondary DNS address 202.188.1.5
02/09/2012 16:01:08.286
configd[18]
network changed: v4(en0:169.254.35.103) DNS* Proxy SMB
02/09/2012 16:01:08.299
configd[18]
network changed: v4(ppp0+:60.48.248.51, en0) DNS! Proxy! SMB
02/09/2012 16:01:08.772
SIMBL Agent[216]
No identifier for bundle at path '/Library/Application Support/SIMBL/Plugins/XSetApplicationIconImage.bundle'
02/09/2012 16:01:09.394
configd[18]
setting hostname to "51.248.48.60.klj03-home.tm.net.my"
02/09/2012 16:01:12.152
com.apple.SecurityServer[15]
Session 100005 created
02/09/2012 16:01:15.383
digest-service[280]
label: default
02/09/2012 16:01:15.383
digest-service[280]
dbname: od:/Local/Default
02/09/2012 16:01:15.383
digest-service[280]
mkey_file: /var/db/krb5kdc/m-key
02/09/2012 16:01:15.383
digest-service[280]
acl_file: /var/db/krb5kdc/kadmind.acl
02/09/2012 16:01:15.384
digest-service[280]
digest-request: uid=0
02/09/2012 16:01:15.387
digest-service[280]
digest-request: init request
02/09/2012 16:01:15.388
digest-service[280]
digest-request: init return domain: MACBOOKPRO-4168 server: 51
02/09/2012 16:01:15.425
mdwrite[278]
[ERROR] [0.000s] com.apple. UBItemStatusNotification.c:805 _do_UBItemStatusNotificationRegisterURLs() can't find realpath for "/Users/yjchua/Library/Mobile Documents/com~apple~system~spotlight/mdlabels", was blocked at "/Users/yjchua/Library/Mobile Documents": 2 (No such file or directory)
02/09/2012 16:01:15.425
mdwrite[278]
[ERROR] [0.001s] com.apple. UBItemStatusNotification.c:805 _do_UBItemStatusNotificationRegisterURLs() can't find realpath for "/Users/yjchua/Library/Mobile Documents/com~apple~system~spotlight/mdlabels", was blocked at "/Users/yjchua/Library/Mobile Documents": 2 (No such file or directory)
02/09/2012 16:01:16.928
SIMBL Agent[216]
No identifier for bundle at path '/Library/Application Support/SIMBL/Plugins/XSetApplicationIconImage.bundle'
02/09/2012 16:02:10.346
com.apple.launchd[1]
(com.apple.xprotectupdater[25]) Exited with code: 255
02/09/2012 16:02:16.166
SIMBL Agent[216]
No identifier for bundle at path '/Library/Application Support/SIMBL/Plugins/XSetApplicationIconImage.bundle'
02/09/2012 16:02:17.497
librariand[303]
MMe quota status changed: under quota
02/09/2012 16:02:19.621
TextEdit[300]
Couldn't contact spell checker for U.S. English
02/09/2012 16:02:21.768
WindowServer[80]
CGXDeferSurfaces : Invalid source window 85
02/09/2012 16:02:21.768
WindowServer[80]
CGXDeferSurfaces : Invalid source window 84
02/09/2012 16:02:40.569

X58M CPU Power connection...

Hi all...
I recently got a barebones kit with the X58M mobo... I've had nothing but problems so far.
This question is mainly about the CPU power connector though. I noticed the CPU power connector on the board has a small plastic "blocker" over 4 of the pin connectors. Is this just for packing and shipping? Should I only use the 4 pin connector from my PSU in the "open" sockets or should I remove the plastic blocker and use the 8 pin connector? The Manual for the X58M shows the CPU connector as a fully open 8 pin socket...
Originally I removed the blocker (so it was like the manual) and used the 8 pin connector... I got all of 2 seconds of a boot (the logo screen only) then nothing. Could this be the problem?
My symptoms are as follows if this is any help... First ever power on - Logo screen, followed by blank white screen and nothing else. All power ons following - No video signal and one short beep every 30 seconds or so.
Please tell me I didn't fry the CPU!
I have tested all the memory sticks, one at a time. I have reseated all the components. I have tested the board outside of the case with just the CPU, Memory and Graphics card. I'm convinced there is a problem with the board, but I'm no rocket scientist...
Current (attempted!) system specs:
X58M
6Gb Corsair XMS3 (3x2Gb)
Intel i7 940
Geforce GTX 550 Ti (1Gb)
Cooler Master Hyper N520 CPU cooler
Cooler Master HAF 912 Case
Ultra LSP 750 PSU
DVD-RW
1x Seagate 1Tb SATA Drive
2x Western Digital Caviar Blue 500Gb SATA Drive (Raid 0)
Thanks in advance for any advice...

Quote
should I remove the plastic blocker and use the 8 pin connector?
Yes.
Quote
small plastic "blocker" over 4 of the pin connectors. Is this just for packing and shipping?
It is there so that users who have a PSU with only a 4-Pin connector, won't plug that 4-pin plug into the wrong part of the board's 8-pin connector.
Quote
Originally I removed the blocker (so it was like the manual) and used the 8 pin connector... I got all of 2 seconds of a boot (the logo screen only) then nothing. Could this be the problem?
No, unless you put a 12V PCI-Express power plug into the 12V CPU Connector.
Quote
My symptoms are as follows if this is any help... First ever power on - Logo screen, followed by blank white screen and nothing else. All power ons following - No video signal and one short beep every 30 seconds or so.
Test the board outside the case on a non-conducting surface in barebone configuration.

Intel i7-4800MQ CPU Power Consuming is much higher than Windows

On Windows 8.1, I run CPU-Z to generate these information:
Processor 1 ID = 0
Number of cores 4 (max 8)
Number of threads 8 (max 16)
Name Intel Core i7 4800MQ
Codename Haswell
Specification Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz
Package (platform ID) Socket 947 rPGA (0x4)
Core Stepping C0
Technology 22 nm
TDP Limit 47 Watts
***Core Speed 799.0 MHz***
Multiplier x Bus Speed 8.0 x 99.9 MHz
Stock frequency 2700 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX, AVX2, FMA3
Turbo Mode supported, enabled
Max non-turbo ratio 27x
Max turbo ratio 37x
Max efficiency ratio 8x
You see: This CPU can run at 800MHz(Core Voltage 0.6 v) on windows, when there is no CPU toast Task. The fan is quiet.
===========================================================
But on Arch Linux, I run the latest i7z-git, I got these information:
Cpu speed from cpuinfo 2693.00Mhz
cpuinfo might be wrong if cpufreq is enabled. To guess correctly try estimating via tsc
Linux's inbuilt cpu_khz code emulated now
True Frequency (without accounting Turbo) 2693 MHz
CPU Multiplier 27x || Bus clock frequency (BCLK) 99.74 MHz
Socket [0] - [physical cores=4, logical cores=8, max online cores ever=4]
TURBO ENABLED on 4 Cores, Hyper Threading ON
Max Frequency without considering Turbo 2792.74 MHz (99.74 x [28])
Max TURBO Multiplier (if Enabled) with 1/2/3/4 Cores is 37x/36x/35x/35x
Real Current Frequency 2653.53 MHz [99.74 x 26.60] (Max of below)
Core [core-id] :Actual Freq (Mult.) C0% Halt(C1)% C3 % C6 % C7 % Temp VCo
Core 1 [0]: 2625.75 (26.33x) 2.45 16.6 1 2.39 77.6 40 0.89
Core 2 [1]: 2653.53 (26.60x) 1 1.14 2.44 1 94.4 40 0.89
Core 3 [2]: 2628.92 (26.36x) 1.41 4.7 1 0 92.9 42 0.89
Core 4 [3]: 2631.18 (26.38x) 2.29 20.4 1.44 1 74.9 39 0.89
CPU can only run at 2.7Ghz (or higher in turbo model), and Core Voltage is 0.89 v. Tha fan is very noisy.
I try many method in CPU power saving, but can not find the solution. Is there any diffierent in power management between Linux and windows?

Gusar wrote:
silenceleaf wrote:I compare the power consuming with windows.
How exactly? That was my question. Just the voltage report? Or do you actually notice something is not right, like shorter battery life? Different tools could possibly measure things differently. Try turbostat, it's in AUR.
Fan management can also be unrelated to actual power consumption. I've wondered before whether pstate, because it works differently, is confusing whatever is responsible for controlling the fans. What brand of laptop do you have? Post the output of lsmod.
And again, just because a tool says the frequency is at 2700MHz, does not mean the processor is actually at that frequency! It is not most of the time.
Thank you for your help.
I am using dell M4800 laptop which have a 97Wh battery. Mainly browing web page and typing some documents. In windows, its battery can last for 5 hours. In linux, it can only last 3 hours.
I am also trying to find more evidence to compare the power consuming between these two platforms. I understand your meaning. It is hard to fairly compare these two environment. I am strill trying to find more information.
lsmod output
Module Size Used by
rfcomm 50698 12
btusb 19648 0
hid_generic 1153 0
snd_usb_audio 117811 2
uvcvideo 72804 0
videobuf2_vmalloc 3304 1 uvcvideo
snd_usbmidi_lib 19755 1 snd_usb_audio
videobuf2_memops 2335 1 videobuf2_vmalloc
snd_rawmidi 18742 1 snd_usbmidi_lib
videobuf2_core 28243 1 uvcvideo
snd_seq_device 5180 1 snd_rawmidi
videodev 111840 2 uvcvideo,videobuf2_core
media 11719 2 uvcvideo,videodev
usbhid 40545 0
hid 90902 2 hid_generic,usbhid
ctr 3831 2
ccm 7894 2
nvidia 10621191 2
snd_hda_codec_hdmi 36379 1
joydev 9631 0
mousedev 10247 0
dell_wmi 1485 0
sparse_keymap 3146 1 dell_wmi
bnep 13053 2
bluetooth 326343 30 bnep,btusb,rfcomm
arc4 2000 2
x86_pkg_temp_thermal 6991 0
intel_powerclamp 8802 0
coretemp 6358 0
kvm_intel 131532 0
kvm 396221 1 kvm_intel
crct10dif_pclmul 4682 0
crct10dif_common 1372 1 crct10dif_pclmul
crc32_pclmul 2923 0
crc32c_intel 14185 0
ghash_clmulni_intel 4405 0
aesni_intel 45548 4
aes_x86_64 7399 1 aesni_intel
lrw 3565 1 aesni_intel
gf128mul 5858 1 lrw
glue_helper 4417 1 aesni_intel
ablk_helper 2004 1 aesni_intel
cryptd 8409 3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_codec_realtek 45083 1
iTCO_wdt 5407 0
iTCO_vendor_support 1929 1 iTCO_wdt
ppdev 7118 0
fuse 76830 3
dell_laptop 12389 0
dcdbas 6463 1 dell_laptop
iwlmvm 136091 0
mac80211 474777 1 iwlmvm
microcode 15216 0
iwlwifi 140001 1 iwlmvm
i2c_i801 11269 0
psmouse 88171 0
pcspkr 2027 0
evdev 11045 22
serio_raw 5009 0
i915 725519 5
snd_hda_intel 37352 4
cfg80211 408167 3 iwlwifi,mac80211,iwlmvm
snd_hda_codec 150017 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
snd_pcm 77822 4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
intel_agp 10872 1 i915
intel_gtt 12664 2 i915,intel_agp
snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
drm_kms_helper 35710 1 i915
snd_timer 18718 1 snd_pcm
rfkill 15651 5 cfg80211,bluetooth,dell_laptop
drm 239102 5 i915,drm_kms_helper,nvidia
lpc_ich 13368 0
i2c_algo_bit 5391 1 i915
i2c_core 24760 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
mei_me 9552 0
snd 59029 23 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
mei 62803 1 mei_me
soundcore 5418 1 snd
e1000e 222900 0
ptp 8244 1 e1000e
pps_core 8833 1 ptp
shpchp 25425 0
thermal 8556 0
wmi 8251 1 dell_wmi
parport_pc 19479 0
parport 30517 2 ppdev,parport_pc
video 11425 1 i915
ac 3334 0
battery 7565 0
processor 24620 0
button 4605 1 i915
vboxdrv 264122 0
msr 2565 0
ext4 473259 2
crc16 1359 2 ext4,bluetooth
mbcache 6074 1 ext4
jbd2 80912 1 ext4
sr_mod 14930 0
sd_mod 31361 5
cdrom 34880 1 sr_mod
atkbd 16806 0
libps2 4187 2 atkbd,psmouse
ahci 23048 3
libahci 21698 1 ahci
libata 172104 2 ahci,libahci
sdhci_pci 12604 0
ehci_pci 3928 0
sdhci 28820 1 sdhci_pci
xhci_hcd 144681 0
ehci_hcd 64171 1 ehci_pci
scsi_mod 132250 3 libata,sd_mod,sr_mod
mmc_core 95465 2 sdhci,sdhci_pci
usbcore 180320 8 btusb,snd_usb_audio,uvcvideo,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common 1648 1 usbcore
i8042 13366 2 libps2,dell_laptop
serio 10721 6 serio_raw,atkbd,i8042,psmouse

975X Platinum CPU Power

I recently bought a 975X Platinum (PowerUp Edition) and when i was getting ready to connect the CPU Power and I noticed that the board has an 8-pin molex connector, but 4 pins are covered up. So my question is should i use a 4 pin CPU power connector or an 8-pin molex for the CPU power? I don't want to damage the CPU so i've waited on hooking up the system.
Any help would be incredibly greatly appreciated. I've read the manual and it doesn't really specify why half the pins come covered up. So as soon as I can get some help on this I'll feel safe powering this system up for the first time

Use your 4 pin Cpu connection. Most Psu's don't have the 8 pin connector that is the reason for the cover, if you do have the 8 pin connector on your Psu you will find that it is a 4x4 pin connector that can be split off for mobos that only have the 4 pin socket. If that is the case you would use the 8 pin plug supplied.

Computer won't power up if the 2x2 CPU POWER connector is plugged in

Yesterday I assembled this computer and it was working great. Played games on it and everything.
MSI K9a2 CF, ATHLON 5000+, LC POWER 550W, RADEON 3850 256MB, 2x1G SUPER TALENT 800MHZ RAM.
3 hours ago I went to the store and left 2x PRIME95 torture test running just to check for stability. After 2hours I got home only to find out the the computer has been shut down but the KEYBOARD still had a light on the NUMLOCK led.
So then I unplugged the PSU from power and started up again. But the PC only started for half a second and then the power went off.
So I pulled everything out of the board only to find out that if the CPU POWER 2x2 connector is in the board then it will not power up. Then I also took out the cpu and try to power up without the CPU and with the CPU POWER 2x2 connector in and it also doesn't power up.
Conclusion:
If the 2x2 CPU power connector is in the MB regardless if the CPU is in or not then the computer will not power on. But if the 2x2 CPU power connector is absent then the computer powers up. But that don't do me any good since without that connector the CPU can't function.
I also tried hooking it up to another PSU but it does no good. The MB, CPU, GPU, RAM, HDDS are only 2days old.
Also it couldn't have overheated since the temperatures never went higher than 50C during full load thx to Scythe Ninja Revision B cooler and also there is no smell or any indication that something could be burned. The temps were checked with BIOS as with MSI probe.
My question is is the MB the problem?? So I would know which part to send back for warranty

Quote from: BOSSKILLER on 07-February-08, 13:24:04
Do you use system stock parameters?(No OC)
Check CPU cooling system.
List PSU details(Look over PSU sticker for them)
Everything was at stock speed there was even no tweaking involved.
CPU cooling system was working great. Under load the max temperatures it had gotten was 50C. And also the CASE was opened so there was no chance of overheating. And also when I started PRIME95 I opened the window and closed the radiators which means the room temperature was about 15C celsium only.
LC POWER 550w 140MM fan.
3.3v 35a
5v 40a
12V 16a
12v 18a
It is probably the board right? I must know this quick to RMA it

Do I need a transformer to plug my iMac into an Italian power socket?

I've just moved from Seattle, Washington to Milan, Italy. The iMac specifications say it can handle 110 to 250 volts and 50 to 60 hertz power. Do I simply buy a US-to-Italian power-socket adapter and plug it in or do I need a special transformer?

No transformer required - just the adapter!

Why can't I make Lightroom use all the CPU-Power (all cores) available for generating Previews?

Dear Lightroom Team,
I've been a Lightroom user since the very first Beta, and I am truly happy with the work you deliver. It changed my way of editing forever, and you guys keep improving it.
Yet there is that one question that bothers me, and that i'm looking for an answer for.
My Workflow has the generate Previews checkbox checked by standard. I usually import between 150 and 2000 photos at once, on occaions it can be up to 5000 photos. Generating Previews always takes a significant amount of time, and Lightroom is only using 25% of my CPU Power while doing so. (using a MacBook Pro 8,2)
I understand the concept, that only using 25% CPU enables me to use the computer while waiting for the Previews. But most of the time I just grab myself a cup of coffee, do the dishes or other stuff, while waiting for the Previews. Usually I rund out of things to do, because it takes ages to Process all the photos. So I would really love to make Lightroom use ALL the cpu power possible.
I'm sure you guys have spent a lot of thoughts while coding this and have a very good answer handy. Looking forward reading it!
all the best,
Wolfgang

Wolfgang Lienbacher wrote:
I was actually hoping to get an official reply from adobe ...
This is prmarily a user-to-user forum. The Adobe staff monitored site is here:
http://feedback.photoshop.com/photoshop_family
On my four-year old Windows 7 i7-860 system LR4.4.1 takes ~0.5 sec. per Canon 5D MKII 21Mp raw image to render 'Standard-Sized' previews with LR Catalog Settings 'Standard Preview Size' set to '2048' pixels. I consider that pretty fast!
I usually build 1:1 full-size previews on import, which takes ~5.0 sec. per image. Processor utilization varies between 15-50% for Standard-Sized previews and 15-65% for 1:1 previews. I consider this pretty slow, but it doesn't stop me from working on the images inside LR's Library and Develop modules.
I wait until 'Copy and import photos' has completed and can see Preview Building has started. LR doesn't slow-down much even with the 1:1 preview building going on in the background. Have you tried working in LR during the preview building (i.e. sorting, rating, keywording, and Develop adjustments)?

What gives you the right to do this to people? Firefox's abuse of my time, patience and computer's resources such as: memory and CPU power!

First and foremost, I need you to understand that over the years I have not only come to heavily rely on Firefox myself, but highly recommended Firefox to literally thousands of people in the course of my work.
The reason for this is very simple... Firefox fast became the most fantastic, configurable and versatile yet highly user-friendly, internet browser in the world! All due to its great: speed and reliability, as well as, crash resistance and economical system resource usage, to name just a few factors!
This is why I'm so upset with you! You establish yourself as the best and then one day just stop being excellent, and start getting worse!
So what have you done?
Ever since version 4, Firefox has progressively regressed in performance and reliability! Firefox is now incapable of running on my computer, without hanging with the CPU power of this quad core machine maxed out! The consequence this freezing has is either: immense frustration on my part right before being forced to kill the process that is not responding from the task manager, or Firefox eventually crashing on its own!
After being so fantastic you start doing this to people? How can you justify this at all?
I am seriously thinking about moving to Google Chrome if this doesn't get resolved ASAP! What do you think about that?
Here is a full list of the latest crash reports, but just from the beginning of August! The list is so big, it didn't fit in the little box you provided below, so here is list:
1. bp-209f18a1-1fa9-43ca-9eba-db3432110824
2. bp-ff6d29a0-e8f4-47e9-b511-6c0f92110822
3. bp-ba22d04d-2afb-45a6-ab08-8ad342110821
4. bp-abafebf9-4d30-4428-87cb-c2aa72110820
5. bp-3ab74d5a-d8fc-4d73-9d88-0918f2110818
6. bp-35afcc7a-0401-42f2-af84-65f1f2110813
7. bp-e1a549f6-733b-4062-a333-879a62110813
8. bp-0d7064fd-41f9-440a-812d-54a5b2110811
9. 63b33a93-9a05-450b-9179-4b3f991a857c
10. 95069d53-be00-4657-90a0-3d127c22042e
11. bp-565c0f54-26c7-4093-804e-f8f8c2110808
12. bp-8755ee08-5530-43c9-a5cf-5eb472110807
13. bp-117aff78-e6dd-4ee5-81d7-c110e2110803
14. bp-b00341c9-7ae8-4b9a-b1bd-d6d722110802
Thank you!

How much data is being backed-up from each Mac? (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
Is there any other data on your Time Capsule, besides the backups?
Most likely, there just isn't room. Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't. Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
Also see #C4 in Time Machine - Troubleshooting for more details.

MSI X99 AC Power Motherboard 8pin+4pin CPU Power?

Hello, I just opened my msi x99 ac and I see it has an 8pin and 4pin cpu power near the top, now that is like what my asus extreme 1150 had, however I only have 2 8pins from my 1200w corsair ax. However right next to the 4pin is a little something, so the 8pin wont work because there is no place for the extra 4pins to hang down. How did you guys wire this up? Because before I just use 2 8pins and the 4 extra pins hanged down the side, but it wont work with this mobo
Thanks

As far as I can guess, 4 pin is for OC. How do you connect it? I don't know. But I think it will work fine without this 4 pin.
Check the manual

How do I connect my notebook to my car power socket?

How do I connect my notebook to my car power socket? Is there a cable that goes from the Magsafe cable directly to a car power socket?

Wel yes i have one um you have to buy it off ebay

Although I plug my iphone5 into a power socket or my laptop,the phone will not charge. The phone indictaes it is charging, but the phone does not recharge

although I plug my iphone5 into a power socket or my laptop,the phone will not charge. The phone indictaes it is charging, but the phone does not recharge

Hi syvliebaby88888888,
If you are having issues with recharging your iPhone's battery, I would suggest that you troubleshoot using the steps in this article -
iPhone and iPod touch: Charging the battery
In particular, this section -
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue persists, please contact Apple Support.
Thanks for using Apple Support Communities.
Best,
Brett L

Mail uses too much CPU power

I don't know why Mail uses something like 99% of the cpu power. It does that a few minutes after it opens. I'm running Lion on a Macbookpro3,1.
Thanks

i am having the same problem. it slows when (a) it's accessing inboxes, or junk or trash ..., (b) it slows when i start a message, (c) it slows intermittently when i am typing a message, (d) it slows when i am sending a message, (e) it slows when i close mail, (f) it slows just about every moment i do ANYTHING.
i had no problem like this in tiger prior to installing Leopard (upgrade). i am using a 2.5 GHx iMac G5. i have cleaned out all the unnecessary inboxes in ~/Library that are generated by reaccessing the IMAP accounts after the leopard upgrade. i don't have large/many-filed mailboxes at ALL either on the IMAP accounts or on the computer.
everytime it slows it the cpu is hovering between 60 and 90% on mail.app.
conversely, i didn't encounter this problem on my 2 powerbooks. one powerbook got a fresh install and i just ported over the mailboxes. the other i did an upgrade.
any advice would be greatly appreciated.

KM4M-L Cpu power socket

Similar Messages

Maybe you are looking for