KMC didn´t work with pcd write-protect mode
Hello,
I have activated the write-protect mode for the PCD in our Portal. Everything is working fine.
After restarting the portal-server, the kmc-component didn´t work anymore. After disabling the write-protect mode and restarting the server, kmc works again.
I read a sap-note (1148777), that this problem was fixed with SPS 15 KMC-Patch 1. Our portal is on SPS 15 with latest patch-releases.
Any idea ?
Thx for your reply!
Oliver
The concurrent mark sweep collector you get with -Xincgc isn't a compacting collector. It doesn't move objects. So while it can grow the heap if needed, it can't give those pages back to the operating system, as you want by turning -XX:MaxHeapFreeRatio= down that far.
Similar Messages
-
this Built-in didn't work with me ....... why?
show_view
and
hide_view
is suppose to add anything for them until they work?Check the 'raise on entry' property of your canvases, and 'hide on exit' property of the windows they're in. If your current item is on a canvas with Raise on Entry = Yes, for instance, trying to show another view on top of it without navigating to an item on that canvas won't have any effect.
-
when i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do
Hello,
Only option is upgrading your Mac's OSX, since Apple will not allow iOS to go backwards.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA -
I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?
Thanks!You didn't mention the kind of track in GB you are trying to create, but if you are connecting the keyboard with a guitar chord to the Tascam, you will need to set up a Real Instrument Track in GB to hear anything. If your keyboard has a midi out, use a midi cable to the midi input of the Tascam, create Software Instrument Track, and you will hear something. But with a guitar chord, it won't send the right signal to a Software Instrument Track. The headphone jack in the Tascam monitors the signal coming back to it out of GB (if you choose the US-122 as your monitor in GB's preferences), so you wouldn't hear your keyboard if the track is not set up correctly. It could be the drivers, but since you didn't mention the type of keyboard or the type of GB track, I thought that might be a possible answer as well.
eMac Mac OS X (10.3.8) -
Write-protect mode is currently active. The editor is now in read-only mode
How do i get the portal out of write protect mode. No matter what i change to do, i get the message
Write-protect mode is currently active. The editor is now in read-only mode.
this shows up in the log
10/06/10 16:21:21 - ERROR: Not deployed. Deploy Service returned ERROR:
java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.pct.bi.tct.BI_Administration..
Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during
deploy: Import aborted - write protect mode is active.Hi David,
Do the following steps:
1. Start the Visual Administrator .
2. Choose Global Configuration u2192Server u2192Services u2192com.sap.portal.pcd.gl .
The properties of the service are displayed:
a. Pcd.Pl.WriteProtectActivated defines whether or not write-protect mode is activated. By default it is set to false .
b. Pcd.Pl.WriteProtectCause describes the reason that write-protect mode is activated. This information appears in the log files.
3. Deactivate write-protect mode by entering false as the value for Pcd.Pl.WriteProtectActivated .
4. C lick Update and then click Save .
A confirmation dialog box opens.
5. To apply the changes to all cluster elements, click Yes .
6. To reset the default values, click the Reset Default Global Properties icon .
This will deactivate the write protect mode.
Thanks and Regards,
Syam. -
Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
DPM 2012: MMC crashes when working with 2 particular protection groups
I have a problem with 2 particular protection groups that will not allow me to perform a backup to tape on them. When I try to, the MMC crashes with the following error logged in the application event log:
The description for Event ID 999 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
An unexpected error caused a failure for process 'mmc'. Restart the DPM process 'mmc'.
Problem Details:
<FatalServiceError><__System><ID>19</ID><Seq>0</Seq><TimeCreated>9/2/2012 3:46:36 PM</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>ArgumentOutOfRangeException</ExceptionType><ExceptionMessage>Index
was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index</ExceptionMessage><ExceptionDetails>System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
at System.ThrowHelper.ThrowArgumentOutOfRangeException()
at System.Collections.Generic.List`1.get_Item(Int32 index)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.CreateRecoveryPointDialog.InitializeForTapeRecoveryPoint()
at System.Windows.Forms.ComboBox.OnSelectedIndexChanged(EventArgs e)
at System.Windows.Forms.ComboBox.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)</ExceptionDetails></FatalServiceError>
the message resource is present but the message is not found in the string/message table
As this appears to be a problem with just these protection groups (I am able to take tape backups of others without a problem) I decided I would try to remove the group, retain the data and re-create it. When I right click on the group and attempt
to stop protection of the group or modify the protection group, the MMC crashes with the same error above.
One protection group is backing up and Exchange 2010 Archive Database, the other, Lync 2010 SQL Databases (and covers 2 different servers).
Does anybody have any suggestions on how I can get these protection groups behaving as they should and working again?
DPM is 2012 RTM running on a Windows Server 2008 R2 SP1 Enterprise physical server. The servers being protected are running Windows Server 2008 R2 SP1 Standard, the Exchange one is virtual (running on Hyper-V), Lync, one physical, one virtual (also running
on Hyper-V).Hi
First of all verify that below services are running and also check which user account is uses for running the DPM and SQL services.
DPM
DPM Replication Agent
SQLAgent$MS$DPM2007$
MSSQL$MS$DPM2007$
Virtual Disk Service
Volume Shadow Copy
Thanks and Regards Deepak -
Does macbook pro work with Seagate G protection 500g 7200rpm??
I bought Mac Book 13" 2.53Ghz Model few days ago.
I try to upgrade my 250G HDD to Seagate G-protection 500g 7200rpm
Just now, I asked clerk by ichat , and she said Mac Book Pro 13" Model doesn't make that writing speed. But I read some review of upgrading HDD with 7200rpm on MacBook Pro 13" and that works well.
So I don't know which one is correct?
Also Still now is there a problem with Seagate G-protection 500g 7200rpm like click, beep, freeze??The speed of the disk is completely irrelevant, Moonseok.
You can use a 10,000rpm SATA drive if you like.
Your most likely problem is that you have not booted from your OS DVD (put the MacBook pro Disk 1 in the drive and hold down the "C" key while turning the computer on) and then used Disk Utility (from the installation discs 'Utilities" menu) to partition and format the new drive for use with a Mac.
You need to use a GUID partition scheme (under "Options" in the "partition" tab when using Disk Utility) and "HFS+ (journaled)" for the File System.
Most "bare" drives come partitioned and formatted just for PC use using FAT 32 or NTFS format , so you need to change this before you try to install the Mac OS X when fitting them in a Mac if you want to be able to "boot" from the drive.
Cheers
Rod -
Skype didn't work with free trial, will it work if...
I tried a skype free trial once, it was like a dollar free, and couldn't call anyone. I'd like to use skype, specially since these days it seems there is way less delay. But i don't wanna buy service if its not gonna work for me. Last time i would call numbers but people wouldn't get the call, so i gave up. Could i get a free trial again? It's been awhile and i was using a different OS at the time so i'd like to try it again.
I didn't work for me as well. It's a shame. Skype offering something that doesn't work.
I paid the "free", tried to make a call to a cell phone in another country and...bang! 20 cents per minute. -
I lost the Real Player download capabillity when FF updated to FF4..... The plug ins for Real Player still show on the add on screen but no " download this video" shows when I mouse over a video.... I tried reverting to earlier version of FF which had worked well for Real Player donloads but it no longer works either.
How can I get Real Player to work with FF again?Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
Fixed Loop Component didn't work with Variables
Hi All,
I am developing a classic planning application using EPM 11.1.2.2
I am writing a business rule in which i need to iterate "N" times. The value of this "N" is always stored in an execution variable.
The business rule work absolutely fine if i provide some static value in the "Value" field of fixed loop.
In case if i provided execution variable in "Value" field of fixed loop the loop didn't iterate. However the rule validated and deployed successfully.
Please note i am developing my business rules using EPM Calculation Manager.
Following Code Works
{index} = 10;
LOOP (10)
Following Code Didn't Work
{index} = 10;
LOOP ({index})AlpBurak already explained it for you. I'm a big fan of loop (and Alp) so just adding to what Alp said.
You can add a higher number in loop and come out of it by setting a break (1, if you are using a variable then set the variable value to 1)
Oracle Essbase Technical Reference
Regards
Celvin
http://www.orahyplabs.com -
Exit IWO10005(Profit center ) didn't work for service order change mode
Dear Guru,
I have built exit IWO10005 to substitute profit center, but it only work for the first initial profit center determination, it didn't work for the below scenario:
1) Change mode on service order
2) before service order save, change some field , it also didn't trigue profit center determination.
And other Badi and exit can help?
Thanks.GGB1?
-
SRP526W didn't work with a Huawei E372
My SRP526W (running the actual firmware 1.01.27) didn't recognize my new Huawei E372 USB dongle (it's a T-Mobile web'n'walk Stick Business II, already installed the newest firmware 11.203.03.10.55).
Using a Huawei E172 or a Huawei E353, both USB dongles works well. But they are slow compared to the E372.
I'd really like to use the E372 stick because it's super fast with up to 42Mbps download speed.
As I could read in the release notes of the SRP526W, the Huawei E372 should be supported since firmware version 1.01.26.
Inside the Huawei E372 you can find the printing "Model: E372u-5", maybe this is a different model which is currently not supported by the SRP526W.
Can anybody help me with this issue?
DieterI also have this problem but I'm on the .13 firmware. I also noted that the calendar entries will not be saved using the PC Suite.
Been a phone user since the Ericsson 318 -
Opera Mini didn't work with Chinese support
I am using Nokia E72-1, RM-530, software version : 023.002 In order to support to display chinese character, I installed the software Psiloc Crystal Chinese Localization If I enable "chinese enabled", Operamini will automatically restart the phone when it start. Opera mini will work normally if I disable "chinese support" of that software. Web browser of Nokia E72 worked fine with "Chinese enabled" Please help.
Please check you have enable Call Park for users in voice policy in Lync Server Control Panel.
Try to increases the call park orbit number range to exclude the possibility of insufficient orbit number.
If the problem persists, you can use parkometer.exe utility from the Lync Server 2010 Resource Kit tools to troubleshoot this issue.
For the information about call Parkometer, check
http://blogs.technet.com/b/drrez/archive/2010/12/13/microsoft-lync-server-2010-resource-kit-tools-call-parkometer.aspx
Lisa Zheng
TechNet Community Support -
ROSS CPU didn't work with kernel patch 112233-07
Just noticed my HyperSPARC (ROSS CPU for S10/S20) had problem with kernel patch.
Got 2 X 180Mhz ROSS CPUs running fine with Solaris 9 (kernel level 112233-07) on S20 until applied the Recommended patches set (kernel level 112233-12), once the patches set installed and reboot, the S20 won't boot up anymore and showed some error on the kernel...
Reinstall again the Solaris 9 (kernel level 112233-07), and applied the Recommended patches set without kernel patch 112233-12, system boot up fine without issue.
Was looking around but didn't find anyone else got same issue (even on Sunsolve site) like me, maybe the box is too old to play with...
Cheers,Oops, put wrong patch ID in subject...
Maybe you are looking for
-
Error While processing an Dimension
Hi Experts, while processing an Dimension i am getting an error while processing, but in the BW it is showing 2 Dimension. How to check which is the Latest/ Right one. Kindly Help Best Regards, Bhupendra Arya
-
Link to download Hotfixes/Updates?
Our ColdFusion instance is locked down inside our DMZ, so while the built-in update feature is cool, we still need to download hotfixes in order to install them. I've done a bunch of searches and come up empty. Can anybody point me to a location to d
-
I keep getting an internet connect error. I'm connecting (as I always have), using the AirPort Extreme. All of a sudden, this message is popping up every so often stating that it cannot connect becuase I haven't entered a phone number.
-
Safari keeps crashing on my macbook. How do I correct it?
Safari keeps crashing on my MacBook. It doesn't it at random times, so there aren't many details to give. How do I correct it?
-
Hello We are 4 plants and hence we have 4 derived role for one master role, in one of the plant, Orglevel field for example Warehouse number / warehouse complex ( $LGNUM) is not maintian ( not used by this plant ) and instead of leaving blank k, can