Kmem_alloc      Buffer: kmem_magazine_63 had 242 fails !

I have a problem with a Oracle VM for sparc
I installed Solaris 11 with Oracle Database 11g on a virtual machine and frequently rebooted my Machine
I have in the logs as error message
Mpanic [CPU2] / thread = 40036274720:
December 5 8:08:45 p.m. unix: [ID 340138 kern.notice] BAD TRAP: type = 31 rp =
2a1037debb0 addr = 38 = 0 mmu_fsr Occurred in module "genunix" due to a NULL pointer
dereference
and with the explominer diagnostic tool I have this error
Prio
Category
Synopsis
1
kmem_alloc
Buffer: kmem_magazine_63 had 242 fails !
2
total_kmem_inuse
total_kmem_inuse is extraordinary high: 18131MB / 40960MB (44.2%)
could you help me solve this problem?

Hi
Which Solaris OS and Level are you running?
Maybe you hit
Certain Solaris 11.1 SRUs and Solaris 10 Patches may Cause Systems Utilizing Dynamic
Intimate Shared Memory (DISM) to Experience a BAD TRAP System Panic in
spt_cache_pps_task() (Doc ID 1676474.1)
Best regards,
Marcel

Similar Messages

  • 2009 iMac 21'5" has had two failed hard drives

    I bought my first Apple in 2009 as I began grad school. I was skeptical to all of the rave reviews I had heard about never having any problems and how great Apple products were. I bought my computer and after an adjustment period of gettting used to the differences, I loved it. I was extremelly happy until a little over 1yr (shortly after the warranty expired) my hard drive failed. After purchasing an external hard drive I was back up and running. I was assured that this was an aberration. However, About two months later that hard drive failed. Now, I am hearing that the problem maybe a faulty motherbord and I simply got a lemon. From what I am told, it would be better to purchase a new computer. Does anyone have any insight into a situation like this, or any possible Idea of a remedy. FYI: it was the 1TB HD running snow leopard.

    If you had the hard drive replaced ay a year and a half ago. It is quite possible it may have the faulty batch of Seagate drives.
    They will cover it if that is the case. Call Apple again and ask them to check the firmware verison of the drive  under System information.
    AppleCare will know if this is a good / Bad drive and should be able to entertain another replacement.
    @NastyNate1227 - Contact Applecare and see if you are entitled to the Seagate Replacement Program.

  • Houston we have a problem - can anyone help? Weve had a failed defrag...

    Hi,
    I have been experiencing a few issues with my macbook, so I popped it into disc utility to verify everything... it identified a few issues that it thought would be sorted if I booted from another drive.
    So I booted from my external hard drive, got everything repaired and thought whilst I was there I would give it a defrag. This turned out to be a bad idea.
    The defrag failed first time out, so trying not to panic I repaired and tried again and it said it had completed but also provided a device error.
    Now the main hd wont load, I get the prohibition sign.
    Ive tried booting from the DVD, this identifys the hd in disk utility, (although its greyed out) and allows me to verify and repair... So I try again... prohibition sign once more.
    I booted from the DVD and tried to backup from timemachine, this appears to be fine but when I select the drive to backup to the hd doesnt appear...
    I attempted a reinstall... but just cant see the hd to install too...
    Im running out of ideas! Can anyone help?
    Im happy enough to wipe it clean and just back up from time machine... how would i do this?

    Hi Thanks,
    Your right it wasnt discwarrior, apologies I think it was called disc magic or drive magic (I used my brothers external to boot from so dont know the actual name)it had a graphic of a spinning black disc on a brown (i think!) background with white text swirling around it... sorry to get so esoteric!
    Im also unsure about the exact nature of the first failure... I know the defrag failed and it told me to repair the drive again which I did using discwarrior.
    When I launch Disk Utility on the Install DVD, It appears that the hd is not mounted, so i assume thats why its unable to install to it, or restore via timemachine to it...
    I have a windows 7 bootcamp partition on the drive which is working fine (its what Im working off now)
    Hope this helps!

  • My very expensive 2010 MacBook Pro hard drive died over a year ago (never bothered to fix it as the dvd drive had also failed so not worth it).   Nevertheless, I finally decided to sync my iPhone to the replacement laptop pc and it wiped out all the music

    My very expensive 2010 MacBook Pro hard drive died over a year ago. I finally synced my iPhone to the replacement laptop pc and it wiped out all the music on the phone including most of the purchases. Can I get the music back (restore didn't help)?

    Okay, I finally got the couple of songs left on the phone to play by uninstalling and reinstalling itunes on the pc and re syncing. The last version I installed (just prior to my original post) failed to start due to some unspecified error?!?. Great!. But I still couldn't sync the itunes purchases from the PC to the iPhone. Then, after about an hour of googling and reading assorted posts mostly about using google to resolve the issue, I finally figured out that I have to actually download ALL the purchased albums from iCloud back onto the iPhone! There are hundreds of them, and some are not even available anymore.
    Why do I have to do that when I originally purchased and downloaded all the music to the phone? Why are they all on the PC to begin with and why won't they go to the phone via the USB cable? Why didn't all the music get wiped out on the phone when I synced with the dodgy itunes I had to uninstall. never mind.
    I accept that all my original music from cds and shared collections is gone on the failed mbp hard drive, but how come this once okay experience has become a trauma? Hundreds of songs to download all over again, sheesh, this has not exactlybeen a "That Was Easy" experience guys.

  • Had a failed Firmware Upgrade on a Zen??? LOOK INSIDE FOR POSSIBLE

    From the Nomadness.net forums: (I had the same problem and user inferno9 at those forums posted this which fixed my issues - hope it helps!)
    The problem was that I had formatted the dri've and attempted to reload the firmware, when, BOOM, the firmware updates would not detect the player. I tried all kinds of different strategies, different drivers, different applications, safe mode, etc...until I FINALLY figured it out.
    Buried deep within Microsoft's website, I found this link...
    http://www.microsoft.com/windows/windowsmedia/player//readme.aspx#RollingbacktoapreviousversionofthePlay er
    Quote:
    Issues updating firmware on Creative ZEN portable devices after installing Windows Media Player
    If you have a Creative ZEN device, make sure the device has the latest firmware before you install the beta release of Windows Media Player . To download the latest firmware, go to Creative Worldwide.
    If you try to upgrade the firmware on your Creative ZEN after you install the beta release of Windows Media Player , the Creative firmware upgrade software might not recognize your device.
    In this case, remove Windows Media Player , update the Creative firmware, and then reinstall Windows Media Player . Creative plans to address this issue in future firmware updates.
    For information about removing the beta release of Windows Media Player , see Rolling back to a previous version of the Player.
    Endquote:
    Good luck all.

    EnsRegis wrote:I'd really love to see a firmware upgrade that gives the Zen Touch a color screen instead of a black-and-white screen. It can't be that hard to program, can it's If you made this, the Touch would be better than any other player on the market! It'd beat the iPod! <EM>Just kidding.</EM>
    I think so

  • HT4367 My Apple TV needs restoring following a failed update and iTunes won't pick it up?? Any ideas anyone - never had to link it to comp before

    Hi - my Apple TV had a failed up date and now I need to restore it. I have hard wired to my comp but iTunes's does not see to be picking it up? Just have the apple device blinking its light and comp timer is just going round? Any ideas anyone? Thanks

    Welcome to the Apple Community Mvt1976.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)
    Check that you have correctly followed the instructions for your model of Apple TV.
    If not already, try using a powered USB port.
    Repeat the process but this time try connecting the cable while iTunes is closed.
    Repeat the process with another cable.
    Try restoring the Apple TV on another computer in another location.

  • Loading Modules and Mounting Local Filesystems failed during boot

    Hi all,
    since 2-3 weeks I've had some FAIL during the boot (after having upgraded the system, I remember that there was involved an upgrade of init script probably, or something connected with the booting process).
    [gianluca@gianluca-laptop ~]$ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
    [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ba60000 (usable)
    [ 0.000000] BIOS-e820: 000000007ba60000 - 000000007babf000 (reserved)
    [ 0.000000] BIOS-e820: 000000007babf000 - 000000007bb80000 (usable)
    [ 0.000000] BIOS-e820: 000000007bb80000 - 000000007bbbf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007bbbf000 - 000000007bbe2000 (usable)
    [ 0.000000] BIOS-e820: 000000007bbe2000 - 000000007bbf7000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
    [ 0.000000] BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Acer Aspire 1810TZ/JM11-MS, BIOS v1.3314 08/31/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 040000000 mask FC0000000 write-back
    [ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7b8a0000 - 7ba50000
    [ 0.000000] Allocated new RAMDISK: 3764e000 - 377fdbda
    [ 0.000000] Move RAMDISK from 000000007b8a0000 - 000000007ba4fbd9 to 3764e000 - 377fdbd9
    [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
    [ 0.000000] ACPI: XSDT 7bbf6120 0006C (v01 ACRSYS ACRPRDCT 00000001 01000013)
    [ 0.000000] ACPI: FACP 7bbf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: DSDT 7bbe8000 073EA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: FACS 7bb8d000 00040
    [ 0.000000] ACPI: DMAR 7bbf5000 00068 (v01 ? 00000001 00000000)
    [ 0.000000] ACPI: HPET 7bbf3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: APIC 7bbf2000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: MCFG 7bbf1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: ASF! 7bbf0000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: SLIC 7bbe7000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: BOOT 7bbe6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: SSDT 7bbe2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1092MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007bc00
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[5] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x0007ba60
    [ 0.000000] 0: 0x0007babf -> 0x0007bb80
    [ 0.000000] 0: 0x0007bbbf -> 0x0007bbe2
    [ 0.000000] 0: 0x0007bbf7 -> 0x0007bc00
    [ 0.000000] On node 0 totalpages: 506587
    [ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f66d5200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2185 pages used for memmap
    [ 0.000000] HighMem zone: 277190 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502626
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/2bef0cce-027d-44fa-a086-056c390cd847 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 8109824 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] ------------[ cut here ]------------
    [ 0.000000] WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x98/0xb0()
    [ 0.000000] Hardware name: Aspire 1810TZ
    [ 0.000000] Your BIOS is broken; DMAR reported at address 0!
    [ 0.000000] BIOS vendor: INSYDE; Ver: v1.3314; Product Version: v1.3314
    [ 0.000000] Modules linked in:
    [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.39-ARCH #1
    [ 0.000000] Call Trace:
    [ 0.000000] [<c1046112>] warn_slowpath_common+0x72/0xa0
    [ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
    [ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
    [ 0.000000] [<c10461a2>] warn_slowpath_fmt_taint+0x32/0x40
    [ 0.000000] [<c11e3dd8>] warn_invalid_dmar+0x98/0xb0
    [ 0.000000] [<c14cba32>] check_zero_address+0x57/0x12b
    [ 0.000000] [<c12250cd>] ? acpi_get_table_with_size+0x59/0xb3
    [ 0.000000] [<c14cbb18>] detect_intel_iommu+0x12/0x78
    [ 0.000000] [<c14ad67e>] pci_iommu_alloc+0x35/0x5a
    [ 0.000000] [<c14b92c3>] mem_init+0xe/0x26d
    [ 0.000000] [<c14c3396>] ? __alloc_bootmem_node_nopanic+0x72/0x98
    [ 0.000000] [<c1342afc>] ? printk+0x1d/0x1f
    [ 0.000000] [<c14c5183>] ? page_cgroup_init_flatmem+0x8f/0xbc
    [ 0.000000] [<c14a85cc>] start_kernel+0x1a0/0x357
    [ 0.000000] [<c14a81bd>] ? loglevel+0x18/0x18
    [ 0.000000] [<c14a80b3>] i386_start_kernel+0xb3/0xb9
    [ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
    [ 0.000000] Disabling lock debugging due to kernel taint
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007bc00)
    [ 0.000000] Memory: 1993572k/2027520k available (3376k kernel code, 32776k reserved, 1390k data, 512k init, 1117500k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
    [ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1296.656 MHz processor.
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.36 BogoMIPS (lpj=4322186)
    [ 0.003344] pid_max: default: 32768 minimum: 301
    [ 0.003415] Security Framework initialized
    [ 0.003422] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003458] Mount-cache hash table entries: 512
    [ 0.003763] Initializing cgroup subsys ns
    [ 0.003768] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.003772] Initializing cgroup subsys cpuacct
    [ 0.003793] Initializing cgroup subsys memory
    [ 0.003809] Initializing cgroup subsys devices
    [ 0.003813] Initializing cgroup subsys freezer
    [ 0.003816] Initializing cgroup subsys net_cls
    [ 0.003819] Initializing cgroup subsys blkio
    [ 0.003876] CPU: Physical Processor ID: 0
    [ 0.003879] CPU: Processor Core ID: 0
    [ 0.003883] mce: CPU supports 6 MCE banks
    [ 0.003894] CPU0: Thermal monitoring enabled (TM2)
    [ 0.003899] using mwait in idle threads.
    [ 0.005672] ACPI: Core revision 20110316
    [ 0.016682] ftrace: allocating 15225 entries in 30 pages
    [ 0.020059] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056606] CPU0: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a
    [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.056663] ... version: 2
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 2
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 000000007fffffff
    [ 0.056663] ... fixed-purpose events: 3
    [ 0.056663] ... event mask: 0000000700000003
    [ 0.073511] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100013] CPU 1 irqstacks, hard=f54f6000 soft=f54f8000
    [ 0.100017] Booting Node 0, Processors #1
    [ 0.100021] smpboot cpu 1: start_ip = 9a000
    [ 0.006666] Initializing CPU#1
    [ 0.196688] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.203327] Brought up 2 CPUs
    [ 0.203331] Total of 2 processors activated (5188.93 BogoMIPS).
    [ 0.204780] devtmpfs: initialized
    [ 0.204780] PM: Registering ACPI NVS region at 7bb80000 (258048 bytes)
    [ 0.206812] print_constraints: dummy:
    [ 0.206898] NET: Registered protocol family 16
    [ 0.207056] ACPI: bus type pci registered
    [ 0.207200] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.207205] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.207209] PCI: Using MMCONFIG for extended config space
    [ 0.207212] PCI: Using configuration type 1 for base access
    [ 0.207951] bio: create slab <bio-0> at 0
    [ 0.211250] ACPI: EC: Look up EC in DSDT
    [ 0.214102] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.217442] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.218088] ACPI: SSDT 7ba6fc98 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.218783] ACPI: Dynamic OEM Table Load:
    [ 0.218788] ACPI: SSDT (null) 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.219036] ACPI: SSDT 7ba6d598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.219702] ACPI: Dynamic OEM Table Load:
    [ 0.219706] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.237115] ACPI: SSDT 7ba6ee18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.237838] ACPI: Dynamic OEM Table Load:
    [ 0.237843] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.246829] ACPI: SSDT 7ba6ff18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.247515] ACPI: Dynamic OEM Table Load:
    [ 0.247520] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.257074] ACPI: Interpreter enabled
    [ 0.257081] ACPI: (supports S0 S3 S4 S5)
    [ 0.257124] ACPI: Using IOAPIC for interrupt routing
    [ 0.265711] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
    [ 0.265982] ACPI: No dock devices found.
    [ 0.265985] HEST: Table not found.
    [ 0.265991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.266509] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.267544] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.267549] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.267553] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.267560] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
    [ 0.267579] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
    [ 0.267613] DMAR: Forcing write-buffer flush capability
    [ 0.267616] DMAR: Disabling IOMMU for graphics on this chipset
    [ 0.267647] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
    [ 0.267668] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
    [ 0.267681] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.267691] pci 0000:00:02.0: reg 20: [io 0x30d0-0x30d7]
    [ 0.267738] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
    [ 0.267756] pci 0000:00:02.1: reg 10: [mem 0x92400000-0x924fffff 64bit]
    [ 0.267863] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
    [ 0.267945] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
    [ 0.268041] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
    [ 0.272125] pci 0000:00:1a.7: reg 10: [mem 0x94504c00-0x94504fff]
    [ 0.296690] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.296698] pci 0000:00:1a.7: PME# disabled
    [ 0.296734] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
    [ 0.296759] pci 0000:00:1b.0: reg 10: [mem 0x94500000-0x94503fff 64bit]
    [ 0.296845] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.296852] pci 0000:00:1b.0: PME# disabled
    [ 0.296883] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
    [ 0.296968] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.296974] pci 0000:00:1c.0: PME# disabled
    [ 0.297011] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
    [ 0.297098] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.297105] pci 0000:00:1c.3: PME# disabled
    [ 0.297148] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
    [ 0.297230] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
    [ 0.297313] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
    [ 0.297391] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
    [ 0.297471] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
    [ 0.297552] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
    [ 0.297646] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
    [ 0.302125] pci 0000:00:1d.7: reg 10: [mem 0x94504800-0x94504bff]
    [ 0.328820] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.328828] pci 0000:00:1d.7: PME# disabled
    [ 0.328858] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.328949] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
    [ 0.329112] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
    [ 0.329145] pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf]
    [ 0.329159] pci 0000:00:1f.2: reg 14: [io 0x30dc-0x30df]
    [ 0.329172] pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7]
    [ 0.329185] pci 0000:00:1f.2: reg 1c: [io 0x30d8-0x30db]
    [ 0.329199] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
    [ 0.329212] pci 0000:00:1f.2: reg 24: [mem 0x94504000-0x945047ff]
    [ 0.329268] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.329274] pci 0000:00:1f.2: PME# disabled
    [ 0.329302] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
    [ 0.329328] pci 0000:00:1f.3: reg 10: [mem 0x94505000-0x945050ff 64bit]
    [ 0.329362] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
    [ 0.329486] pci 0000:01:00.0: [1969:1063] type 0 class 0x000200
    [ 0.329519] pci 0000:01:00.0: reg 10: [mem 0x93500000-0x9353ffff 64bit]
    [ 0.329537] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f]
    [ 0.329645] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.329653] pci 0000:01:00.0: PME# disabled
    [ 0.333336] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.333343] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.333349] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
    [ 0.333360] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
    [ 0.333454] pci 0000:02:00.0: [8086:0083] type 0 class 0x000280
    [ 0.333498] pci 0000:02:00.0: reg 10: [mem 0x92500000-0x92501fff 64bit]
    [ 0.333662] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.333671] pci 0000:02:00.0: PME# disabled
    [ 0.340004] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
    [ 0.340011] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
    [ 0.340018] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
    [ 0.340028] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
    [ 0.340121] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.340128] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.340135] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.340145] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.340150] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.340154] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.340158] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.340163] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
    [ 0.340186] pci_bus 0000:00: on NUMA node 0
    [ 0.340192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.340631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.340734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    [ 0.340832] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.340835] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.348405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.348504] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.348599] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.348693] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.348788] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.348886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.348981] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.349075] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.349214] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.349232] vgaarb: loaded
    [ 0.349386] PCI: Using ACPI for IRQ routing
    [ 0.349389] PCI: pci_cache_line_size set to 64 bytes
    [ 0.349500] reserve RAM buffer: 000000000009e000 - 000000000009ffff
    [ 0.349504] reserve RAM buffer: 000000007ba60000 - 000000007bffffff
    [ 0.349510] reserve RAM buffer: 000000007bb80000 - 000000007bffffff
    [ 0.349514] reserve RAM buffer: 000000007bbe2000 - 000000007bffffff
    [ 0.349518] reserve RAM buffer: 000000007bc00000 - 000000007bffffff
    [ 0.349695] NetLabel: Initializing
    [ 0.349698] NetLabel: domain hash size = 128
    [ 0.349700] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.349720] NetLabel: unlabeled traffic allowed by default
    [ 0.349740] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.349748] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.349756] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.359999] Switching to clocksource hpet
    [ 0.363178] Switched to NOHz mode on CPU #0
    [ 0.363276] Switched to NOHz mode on CPU #1
    [ 0.370116] pnp: PnP ACPI init
    [ 0.370143] ACPI: bus type pnp registered
    [ 0.370722] pnp 00:00: [bus 00-ff]
    [ 0.370727] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.370731] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.370735] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.370739] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.370743] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.370747] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.370751] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.370755] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.370759] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.370763] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.370767] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.370770] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.370774] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.370778] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.370782] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.370786] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.370790] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.370794] pnp 00:00: [mem 0x80000000-0xfebfffff window]
    [ 0.370798] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.370911] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.371140] pnp 00:01: [io 0x002e-0x002f]
    [ 0.371144] pnp 00:01: [io 0x004e-0x004f]
    [ 0.371148] pnp 00:01: [io 0x164e-0x164f]
    [ 0.371151] pnp 00:01: [io 0x0061]
    [ 0.371154] pnp 00:01: [io 0x0070]
    [ 0.371157] pnp 00:01: [io 0x0080]
    [ 0.371160] pnp 00:01: [io 0x0092]
    [ 0.371163] pnp 00:01: [io 0x00b2-0x00b3]
    [ 0.371167] pnp 00:01: [io 0x0063]
    [ 0.371170] pnp 00:01: [io 0x0065]
    [ 0.371173] pnp 00:01: [io 0x0067]
    [ 0.371176] pnp 00:01: [io 0x0600-0x060f]
    [ 0.371180] pnp 00:01: [io 0x0610]
    [ 0.371183] pnp 00:01: [io 0x0800-0x080f]
    [ 0.371186] pnp 00:01: [io 0x0810-0x0817]
    [ 0.371190] pnp 00:01: [io 0x0820-0x0823]
    [ 0.371193] pnp 00:01: [io 0x0400-0x047f]
    [ 0.371196] pnp 00:01: [io 0x0500-0x053f]
    [ 0.371200] pnp 00:01: [mem 0xf8000000-0xfbffffff]
    [ 0.371203] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.371211] pnp 00:01: [mem 0xfed10000-0xfed13fff]
    [ 0.371215] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.371218] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.371222] pnp 00:01: [mem 0xfec00000-0xfec00fff]
    [ 0.371225] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.371229] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 0.371232] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 0.371236] pnp 00:01: [mem 0xfee00000-0xfee00fff]
    [ 0.371273] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
    [ 0.371372] system 00:01: [io 0x0600-0x060f] has been reserved
    [ 0.371377] system 00:01: [io 0x0610] has been reserved
    [ 0.371381] system 00:01: [io 0x0800-0x080f] has been reserved
    [ 0.371386] system 00:01: [io 0x0810-0x0817] has been reserved
    [ 0.371390] system 00:01: [io 0x0820-0x0823] has been reserved
    [ 0.371394] system 00:01: [io 0x0400-0x047f] has been reserved
    [ 0.371399] system 00:01: [io 0x0500-0x053f] has been reserved
    [ 0.371405] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.371410] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.371414] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.371419] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.371424] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.371429] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.371434] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.371438] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.371443] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.371448] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.371453] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.371471] pnp 00:02: [io 0x0000-0x001f]
    [ 0.371474] pnp 00:02: [io 0x0081-0x0091]
    [ 0.371478] pnp 00:02: [io 0x0093-0x009f]
    [ 0.371481] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.371485] pnp 00:02: [dma 4]
    [ 0.371537] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.371576] pnp 00:03: [io 0x0070-0x0077]
    [ 0.371630] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.371735] pnp 00:04: [irq 0 disabled]
    [ 0.371750] pnp 00:04: [irq 8]
    [ 0.371753] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.371809] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.371828] pnp 00:05: [io 0x00f0]
    [ 0.371835] pnp 00:05: [irq 13]
    [ 0.371889] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.371907] pnp 00:06: [mem 0xff800000-0xffffffff]
    [ 0.371965] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.371991] pnp 00:07: [io 0x0060]
    [ 0.371995] pnp 00:07: [io 0x0064]
    [ 0.372003] pnp 00:07: [irq 1]
    [ 0.372061] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.372090] pnp 00:08: [irq 12]
    [ 0.372150] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 PNP0f13 (active)
    [ 0.372300] pnp: PnP ACPI: found 9 devices
    [ 0.372303] ACPI: ACPI bus type pnp unregistered
    [ 0.409749] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.409755] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.409764] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
    [ 0.409772] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
    [ 0.409782] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
    [ 0.409787] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
    [ 0.409795] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
    [ 0.409802] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
    [ 0.409812] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
    [ 0.409815] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.409823] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 0.409829] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.409853] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.409861] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.409875] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 0.409881] pci 0000:00:1c.3: setting latency timer to 64
    [ 0.409891] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.409897] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.409901] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.409905] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.409909] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.409914] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.409918] pci_bus 0000:01: resource 1 [mem 0x93500000-0x944fffff]
    [ 0.409922] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
    [ 0.409927] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
    [ 0.409931] pci_bus 0000:02: resource 1 [mem 0x92500000-0x934fffff]
    [ 0.409935] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
    [ 0.409940] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.409943] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.409947] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.409952] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.410023] NET: Registered protocol family 2
    [ 0.410132] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.410465] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.411087] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.411362] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.411366] TCP reno registered
    [ 0.411370] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.411381] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.411559] NET: Registered protocol family 1
    [ 0.411580] pci 0000:00:02.0: Boot video device
    [ 0.440052] PCI: CLS 64 bytes, default 64
    [ 0.440120] Unpacking initramfs...
    [ 0.493687] Freeing initrd memory: 1728k freed
    [ 0.494435] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
    [ 0.494439] Simple Boot Flag at 0x44 set to 0x1
    [ 0.494754] apm: BIOS not found.
    [ 0.494943] audit: initializing netlink socket (disabled)
    [ 0.494958] type=2000 audit(1312551622.493:1): initialized
    [ 0.495391] highmem bounce pool size: 64 pages
    [ 0.495398] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.498715] VFS: Disk quotas dquot_6.5.2
    [ 0.498846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.499018] msgmni has been set to 1714
    [ 0.499314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.499357] io scheduler noop registered
    [ 0.499361] io scheduler deadline registered
    [ 0.499380] io scheduler cfq registered (default)
    [ 0.499553] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.499624] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.499729] pcieport 0000:00:1c.3: setting latency timer to 64
    [ 0.499792] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
    [ 0.500070] intel_idle: MWAIT substates: 0x22220
    [ 0.500074] intel_idle: does not run on family 6 model 23
    [ 0.500082] ERST: Table is not found!
    [ 0.500103] isapnp: Scanning for PnP cards...
    [ 0.857044] isapnp: No Plug & Play device found
    [ 0.857122] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.060716] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
    [ 1.068400] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.071789] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.071804] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.071809] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.071813] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.071818] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.072099] mousedev: PS/2 mouse device common for all mice
    [ 1.072185] rtc_cmos 00:03: RTC can wake from S4
    [ 1.086817] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 1.086852] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 1.086887] cpuidle: using governor ladder
    [ 1.086890] cpuidle: using governor menu
    [ 1.087261] TCP cubic registered
    [ 1.087265] NET: Registered protocol family 17
    [ 1.087276] Registering the dns_resolver key type
    [ 1.087307] Using IPI No-Shortcut mode
    [ 1.087437] PM: Hibernation image not present or could not be loaded.
    [ 1.087445] registered taskstats version 1
    [ 1.087957] rtc_cmos 00:03: setting system clock to 2011-08-05 13:40:23 UTC (1312551623)
    [ 1.088039] Initializing network drop monitor service
    [ 1.088128] Freeing unused kernel memory: 512k freed
    [ 1.088469] Write protecting the kernel text: 3380k
    [ 1.088507] Write protecting the kernel read-only data: 1028k
    [ 1.093885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.106227] udevd[54]: starting version 171
    [ 1.236052] SCSI subsystem initialized
    [ 1.269724] libata version 3.00 loaded.
    [ 1.282619] ahci 0000:00:1f.2: version 3.0
    [ 1.282637] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.282703] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 1.282767] ahci: SSS flag set, parallel bus scan disabled
    [ 1.282814] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 1.282820] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led pmp pio slum part ccc ems
    [ 1.282828] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.301035] scsi0 : ahci
    [ 1.301194] scsi1 : ahci
    [ 1.301318] scsi2 : ahci
    [ 1.301438] scsi3 : ahci
    [ 1.301557] scsi4 : ahci
    [ 1.301679] scsi5 : ahci
    [ 1.301772] ata1: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504100 irq 42
    [ 1.301778] ata2: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504180 irq 42
    [ 1.301782] ata3: DUMMY
    [ 1.301784] ata4: DUMMY
    [ 1.301788] ata5: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504300 irq 42
    [ 1.301793] ata6: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504380 irq 42
    [ 1.496710] Refined TSC clocksource calibration: 1296.749 MHz.
    [ 1.496717] Switching to clocksource tsc
    [ 1.786699] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.787736] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
    [ 1.787741] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.788946] ata1.00: configured for UDMA/133
    [ 1.789123] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
    [ 2.106690] ata2: SATA link down (SStatus 0 SControl 300)
    [ 2.426689] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.746690] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.760584] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 2.760671] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.760676] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.760709] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.798506] sda: sda1 sda2 sda3 sda4
    [ 2.799028] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.310879] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.653828] udevd[228]: starting version 173
    [ 4.958869] ACPI: acpi_idle registered with cpuidle
    [ 4.959125] Monitor-Mwait will be used to enter C-1 state
    [ 4.959159] Monitor-Mwait will be used to enter C-2 state
    [ 4.959167] Marking TSC unstable due to TSC halts in idle
    [ 4.959208] Switching to clocksource hpet
    [ 5.052561] fuse init (API version 7.16)
    [ 5.094399] acerhdf: Acer Aspire One Fan driver, v.0.5.24
    [ 5.094431] acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1810TZ/v1.3314, please report, aborting!
    [ 5.377790] Linux agpgart interface v0.103
    [ 5.381930] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 5.382452] ACPI: AC Adapter [ACAD] (off-line)
    [ 5.389644] wmi: Mapper loaded
    [ 5.390172] iTCO_vendor_support: vendor-support=0
    [ 5.532413] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 5.532424] ACPI: Power Button [PWRB]
    [ 5.532507] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 5.548014] acer_wmi: Acer Laptop ACPI-WMI Extras
    [ 5.550648] acer_wmi: Brightness must be controlled by generic video driver
    [ 5.554953] ACPI: Lid Switch [LID0]
    [ 5.555062] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 5.555072] ACPI: Sleep Button [SLPB]
    [ 5.555166] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 5.555173] ACPI: Power Button [PWRF]
    [ 5.560994] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 5.569140] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 5.569153] ACPI: Battery Slot [BAT1] (battery present)
    [ 5.570951] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 5.573564] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
    [ 5.573653] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 5.602755] usbcore: registered new interface driver usbfs
    [ 5.602793] usbcore: registered new interface driver hub
    [ 5.606733] usbcore: registered new device driver usb
    [ 5.623405] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 5.659329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 5.659373] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 5.659401] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 5.659407] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 5.659455] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 5.670065] ehci_hcd 0000:00:1a.7: debug port 1
    [ 5.673944] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 5.673971] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94504c00
    [ 5.690924] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 5.691336] hub 1-0:1.0: USB hub found
    [ 5.691345] hub 1-0:1.0: 2 ports detected
    [ 5.691477] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 5.691508] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 5.691514] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 5.691528] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 5.702271] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.706752] ehci_hcd 0000:00:1d.7: debug port 1
    [ 5.710655] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 5.710683] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94504800
    [ 5.723379] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 5.723603] hub 2-0:1.0: USB hub found
    [ 5.723610] hub 2-0:1.0: 6 ports detected
    [ 5.724256] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
    [ 5.724463] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 5.725927] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 5.726502] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
    [ 5.802604] uhci_hcd: USB Universal Host Controller Interface driver
    [ 5.802687] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.802702] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 5.802709] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 5.802732] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 5.813675] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
    [ 5.814571] hub 3-0:1.0: USB hub found
    [ 5.814580] hub 3-0:1.0: 2 ports detected
    [ 5.814712] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 5.814725] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 5.814730] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 5.814748] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 5.823482] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
    [ 5.824221] hub 4-0:1.0: USB hub found
    [ 5.824230] hub 4-0:1.0: 2 ports detected
    [ 5.824360] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 5.824373] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 5.824378] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 5.824392] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
    [ 5.836745] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
    [ 5.836988] hub 5-0:1.0: USB hub found
    [ 5.836995] hub 5-0:1.0: 2 ports detected
    [ 5.837118] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    [ 5.837130] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 5.837135] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 5.837148] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
    [ 5.846757] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040
    [ 5.846997] hub 6-0:1.0: USB hub found
    [ 5.847004] hub 6-0:1.0: 2 ports detected
    [ 5.869833] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 5.909784] [drm] Initialized drm 1.1.0 20060810
    [ 5.926221] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.926238] atl1c 0000:01:00.0: setting latency timer to 64
    [ 6.014499] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
    [ 6.022590] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 6.022599] i915 0000:00:02.0: setting latency timer to 64
    [ 6.033370] usb 2-5: new high speed USB device number 2 using ehci_hcd
    [ 6.045183] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 6.045188] iwlagn: Copyright(c) 2003-2010 Intel Corporation
    [ 6.045269] iwlagn 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 6.045281] iwlagn 0000:02:00.0: setting latency timer to 64
    [ 6.045314] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
    [ 6.066230] iwlagn 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6
    [ 6.066236] iwlagn 0000:02:00.0: Device SKU: 0X9
    [ 6.066240] iwlagn 0000:02:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
    [ 6.066261] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
    [ 6.066513] iwlagn 0000:02:00.0: irq 43 for MSI/MSI-X
    [ 6.071614] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 6.071623] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 6.071626] [drm] Driver supports precise vblank timestamp query.
    [ 6.167372] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 6.236519] iwlagn 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138
    [ 6.236889] Registered led device: phy0-led
    [ 6.309104] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 6.435863] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
    [ 6.480908] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
    [ 6.507822] Linux media interface: v0.10
    [ 6.580021] Linux video capture interface: v2.00
    [ 6.591629] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
    [ 6.608274] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
    [ 6.608368] usbcore: registered new interface driver uvcvideo
    [ 6.608371] USB Video Class driver (v1.0.0)
    [ 6.624890] fbcon: inteldrmfb (fb0) is primary device
    [ 6.671041] Console: switching to colour frame buffer device 170x48
    [ 6.678170] fb0: inteldrmfb frame buffer device
    [ 6.678173] drm: registered panic notifier
    [ 6.679734] acpi device:03: registered as cooling_device2
    [ 6.679988] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
    [ 6.680104] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
    [ 6.680793] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.680840] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 6.680937] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 6.680975] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 6.802470] hda_codec: ALC269: BIOS auto-probing.
    [ 6.803832] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [ 6.833736] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 6.833855] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 8.406870] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 8.676079] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 8.886041] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    [ 12.277210] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
    [ 12.600410] /dev/vmmon[897]: Module vmmon: registered with major=10 minor=165
    [ 12.600421] /dev/vmmon[897]: Module vmmon: initialized
    [ 12.646908] /dev/vmci[905]: VMCI: Driver initialized.
    [ 12.647204] /dev/vmci[905]: Module vmci: registered with major=10 minor=58
    [ 12.647209] /dev/vmci[905]: Module vmci: initialized
    [ 12.827251] ppdev: user-space parallel port driver
    [ 13.786476] /dev/vmnet: open called by PID 979 (vmnet-dhcpd)
    [ 13.786488] /dev/vmnet: hub 1 does not exist, allocating memory.
    [ 13.786521] /dev/vmnet: port on hub 1 successfully opened
    [ 13.801438] /dev/vmnet: open called by PID 981 (vmnet-netifup)
    [ 13.801452] /dev/vmnet: port on hub 1 successfully opened
    [ 13.854670] /dev/vmnet: open called by PID 983 (vmnet-dhcpd)
    [ 13.854683] /dev/vmnet: hub 8 does not exist, allocating memory.
    [ 13.854720] /dev/vmnet: port on hub 8 successfully opened
    [ 13.915864] /dev/vmnet: open called by PID 987 (vmnet-natd)
    [ 13.915881] /dev/vmnet: port on hub 8 successfully opened
    [ 13.936302] /dev/vmnet: open called by PID 988 (vmnet-netifup)
    [ 13.936317] /dev/vmnet: port on hub 8 successfully opened
    [ 38.702663] NET: Registered protocol family 10
    [ 38.704338] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 38.704788] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 39.752832] EXT4-fs (sda3): re-mounted. Opts: commit=600
    [ 40.413933] EXT4-fs (sda4): re-mounted. Opts: commit=600
    [ 48.976756] vmnet8: no IPv6 routers present
    [ 49.523376] vmnet1: no IPv6 routers present
    [ 105.125369] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
    [ 105.127031] wlan0: authenticated
    [ 105.137382] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
    [ 105.140390] wlan0: RX AssocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
    [ 105.140396] wlan0: associated
    [ 105.144018] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 105.447100] /dev/vmnet: open called by PID 971 (vmnet-bridge)
    [ 105.447115] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 105.447150] /dev/vmnet: port on hub 0 successfully opened
    [ 105.447175] bridge-wlan0: device is wireless, enabling SMAC
    [ 105.447181] bridge-wlan0: up
    [ 105.448675] bridge-wlan0: attached
    [ 107.324643] wlan0: deauthenticating from 00:15:e9:27:b5:38 by local choice (reason=3)
    [ 107.400201] cfg80211: Calling CRDA to update world regulatory domain
    [ 107.423712] bridge-wlan0: disabling the bridge
    [ 107.440034] bridge-wlan0: down
    [ 107.440043] bridge-wlan0: detached
    [ 107.440111] /dev/vmnet: open called by PID 971 (vmnet-bridge)
    [ 107.440124] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 107.440157] /dev/vmnet: port on hub 0 successfully opened
    [ 107.440172] bridge-wlan0: device is wireless, enabling SMAC
    [ 107.440177] bridge-wlan0: up
    [ 107.440182] bridge-wlan0: attached
    [ 107.860411] bridge-wlan0: disabling the bridge
    [ 107.869871] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
    [ 107.872071] wlan0: authenticated
    [ 107.872466] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
    [ 107.875411] wlan0: RX ReassocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
    [ 107.875417] wlan0: associated
    [ 107.876696] bridge-wlan0: down
    [ 107.876705] bridge-wlan0: detached
    [ 107.904358] /dev/vmnet: open called by PID 971 (vmnet-bridge)
    [ 107.904374] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 107.904409] /dev/vmnet: port on hub 0 successfully opened
    [ 107.904423] bridge-wlan0: device is wireless, enabling SMAC
    [ 107.904428] bridge-wlan0: up
    [ 107.905917] bridge-wlan0: attached
    [ 118.910106] wlan0: no IPv6 routers present
    This is the output of /var/log/boot
    Fri Aug 5 15:40:30 2011: :: Adjusting system time and setting kernel timezone ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Starting UDev Daemon ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Triggering UDev uevents ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Loading Modules ^[[71G [BUSY] ^[[71G [FAIL]
    Fri Aug 5 15:40:30 2011: :: Waiting for UDev uevents to be processed ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190178/480496 files, 1530694/1921775 blocks
    Fri Aug 5 15:40:30 2011: /dev/sda4: clean, 49123/14761984 files, 38814365/59034858 blocks
    Fri Aug 5 15:40:30 2011: /dev/sda1: clean, 30/26104 files, 19115/104388 blocks
    Fri Aug 5 15:40:30 2011: ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
    Fri Aug 5 15:40:31 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: INIT: Entering runlevel: 5
    Fri Aug 5 15:40:32 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:33 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:33 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:33 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:34 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:34 2011: :: Restoring ALSA Levels ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:34 2011: Starting VMware services:
    Fri Aug 5 15:40:34 2011: VMware USB Arbitrator^[[71G done
    Fri Aug 5 15:40:34 2011: Virtual machine monitor^[[71G done
    Fri Aug 5 15:40:35 2011: Virtual machine communication interface^[[71G done
    Fri Aug 5 15:40:35 2011: VM communication interface socket family^[[71G done
    Fri Aug 5 15:40:35 2011: Blocking file system^[[71G done
    Fri Aug 5 15:40:35 2011: Virtual ethernet^[[71G done
    Fri Aug 5 15:40:36 2011: Shared Memory Available^[[71G done
    Fri Aug 5 15:40:36 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
    What could be the problem?
    Thanks

    Wed Aug 10 08:49:11 2011: :: Adjusting system time and setting kernel timezone ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Starting UDev Daemon ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Triggering UDev uevents ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Loading Modules ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Waiting for UDev uevents to be processed ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190755/480496 files, 1567027/1921775 blocks
    Wed Aug 10 08:49:11 2011: /dev/sda4: clean, 39914/14761984 files, 39001242/59034858 blocks
    Wed Aug 10 08:49:11 2011: /dev/sda1: clean, 29/26104 files, 19024/104388 blocks
    Wed Aug 10 08:49:11 2011: ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
    Wed Aug 10 08:49:11 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: INIT: Entering runlevel: 5
    Wed Aug 10 08:49:12 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:13 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:13 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Restoring ALSA Levels ^[[161G [BUSY] Found hardware: "HDA-Intel" "Intel Cantiga HDMI" "HDA:10ec0269,1025029b,00100004 HDA:80862802,80860101,001000
    Wed Aug 10 08:49:14 2011: Hardware is initialized using a generic method
    Wed Aug 10 08:49:14 2011: ^[[161G [FAIL]
    Wed Aug 10 08:49:15 2011: Starting VMware services:
    Wed Aug 10 08:49:15 2011: VMware USB Arbitrator^[[71G done
    Wed Aug 10 08:49:15 2011: Virtual machine monitor^[[71Gfailed
    Wed Aug 10 08:49:15 2011: Virtual machine communication interface^[[71Gfailed
    Wed Aug 10 08:49:15 2011: VM communication interface socket family^[[71Gfailed
    Wed Aug 10 08:49:15 2011: Blocking file system^[[71Gfailed
    Wed Aug 10 08:49:15 2011: Virtual ethernet^[[71Gfailed
    Wed Aug 10 08:49:15 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
    Ok, I still have that fail during the 'Mounting Local Filesystems'.
    If there isn't the swap partition it should be something else from my fstab..
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    devpts /dev/pts devpts defaults 0 0
    shm /dev/shm tmpfs nodev,nosuid 0 0
    UUID=1b52b0c4-5b56-4bee-8966-65bcaffbf2ee /home ext4 defaults 0 1
    UUID=22475d68-29e5-4a22-8942-38cb30110d30 swap swap defaults 0 0
    UUID=2bef0cce-027d-44fa-a086-056c390cd847 / ext4 defaults 0 1
    UUID=59d811ed-2920-45c1-a5cc-e0675e212721 /boot ext2 defaults 0 1
    UUID=325220A852207331 /media/MyPassport ntfs defaults,nofail 0 2
    UUID=FDC0-6FEA /media/CowonIvana auto defaults,nofail 0 2
    UUID=7AEB-F44F /media/CentralEurope auto defaults,nofail 0 2
    UUID=287B-C290 /media/CowonGian auto defaults,nofail 0 2
    UUID=3F9D788B3774630C /media/SanDisk ntfs defaults,nofail 0 2
    But I can't find anything that looks unusual into my /etc/fstab

  • Error editing task sequence: Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" From XML into WMI

    I've started getting an intermittent error editing my Windows 7 OSD task sequence.  Sometimes I can open the TS to edit, but when I try to apply changes I get the error.  Other times I get the error when trying to open the TS.  If I try again
    right away, I still get the error, but if I wait a few minutes and try again sometimes it will open the TS. 
    The error reads:
    ConfigMgr Error Object:instance of SMS_Extended Status{Description = "Failed to load dynamic properties for class \"SMS_TaskSequence_ApplyWindowsSettingsAction\" from XML into WMI";Error Code = 2147943746;File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\ssptspackage.cpp";Line = 3454;Operation = "ExecMethod";ParameterInfo = "SMS_TaskSequencePackage";ProviderName = "WinMgmt";StatusCode = 2147749889;}
    Coinciding with this error, I show the following entries in the TaskSequenceProvider.log file: 
    [PID: 7608] Invoking method SMS_TaskSequence.LoadFromXml
    TaskSequenceProvider
    Failed to protect memory buffer, hr=0x80070542
    TaskSequenceProvider
    Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI 0x80070542 (2147943746)
    TaskSequenceProvider
    Failed to load node Apply Windows Settings from XML into WMI 0x80070542 (2147943746)
    TaskSequenceProvider
    Failed to load children steps for node "PostInstall" from XML 0x80070542 (2147943746)
    TaskSequenceProvider
    Failed to load children steps for node "Execute Task Sequence" from XML 0x80070542 (2147943746)
    TaskSequenceProvider
    Failed to load children steps for node "" from XML 0x80070542 (2147943746)
    TaskSequenceProvider
    Failed to load XML for the task sequence into WMI 0x80070542 (2147943746)
    TaskSequenceProvider
    [PID: 7608] Done with method SMS_TaskSequence.LoadFromXml
    TaskSequenceProvider
    Setting status complete:  status code = 0x80070542; Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI
    TaskSequenceProvider
    I exported the task sequence and checked in "object.xml" for the "ApplyWindowsSettingsAction", to see if there was something odd in the xml, but I don't find anything that jumps out as being wrong.  Here's the section of XML for
    that step.  I've removed identifying info, and replaced it with a generic term in bold.
    <step type="SMS_TaskSequence_ApplyWindowsSettingsAction" name="Apply Windows Settings" description="" runIn="WinPE" successCodeList="0" runFromNet="false"><action>osdwinsettings.exe /config</action><defaultVarList><variable name="OSDLocalAdminPassword" property="AdminPassword"></variable><variable name="OSDComputerName" property="ComputerName">%_SMSTSMachineName%</variable><variable name="OSDProductKey" property="ProductKey"></variable><variable name="OSDRandomAdminPassword" property="RandomAdminPassword">false</variable><variable name="OSDRegisteredOrgName" property="RegisteredOrgName">COMPANY NAME</variable><variable name="OSDRegisteredUserName" property="RegisteredUserName">COMPANY NAME</variable><variable name="OSDServerLicenseConnectionLimit" property="ServerLicenseConnectionLimit">5</variable><variable name="OSDTimeZone" property="TimeZone">Central Standard Time</variable></defaultVarList></step><step type="SMS_TaskSequence_ApplyNetworkSettingsAction" name="Apply Network Settings" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>osdnetsettings.exe configure</action><defaultVarList><variable name="OSDDomainName" property="DomainName">DOMAIN.COM</variable><variable name="OSDJoinPassword" property="DomainPassword"></variable><variable name="OSDJoinAccount" property="DomainUsername">DOMAIN ACCOUNT</variable><variable name="OSDEnableTCPIPFiltering" property="EnableTCPIPFiltering" hidden="true">false</variable><variable name="OSDNetworkJoinType" property="NetworkJoinType">0</variable><variable name="OSDAdapterCount" property="NumAdapters" hidden="true">0</variable></defaultVarList></step>
    Is there any other log I should check for a clue on this issue?  What could be causing this error?

    Thanks for sharing that!  I tend to save contacting MS support until after I've exhausted other options.  I'm always afraid that I'll spend the $500 to open a case and then it turns out to be something simple that I would have found if I had just
    kept working on it myself a little longer.
    It looks like that link is for an update released in February as KB3023562.  I downloaded and installed it. I'll try opening/editing/saving the task sequence a few times today to see if the issue is resolved.  
    After I had already installed it, I thought to look up that update in configmgr.  The update is listed as superseded by 2 other updates.  The newest of those is KB3046049, which just installed last night with the other March patches, so it's possible
    that I didn't need to install KB3023562 after all.  

  • IBook G4 fails to boot with internal HD installed, works when removed

    The short version: My iBook started failing to boot via any method (gray screen) and the boot menu (Option during startup) would freeze. Replaced HD, things were better. Six months into new HD, nearly the same symptoms appear again. Removed HD, now running off different HD via FireWire.
    The long version–
    Back in late 2008-12, my iBook started failing to boot up. Usually it would refuse to boot from any source. Booting the internal disk (10.4.11) would get to a gray screen without any logo and stay there. Holding down Option, the boot menu would come up, but it would usually freeze before it displayed any volumes. Booting from CD (AHT, or OS install disc) would fail in nearly the same way as booting from the internal drive. Target Disk Mode would start, but once the other machine tried to access the drive, the FireWire logo would stop moving and the drive would never show up on the other computer. Very rarely, the machine would get a bit further through one of the boot mechanisms, but it usually froze while booting or just after login.
    This machine has gone through three logic boards in the past, so I suspected that was the problem again. I took it to a local Genius Bar and the Genius explained that it was probably the hard drive. He said that sometimes, depending on the way the drive fails, it can "take out" other parts of the system due to drawing too much current, etc.
    I was a bit skeptical, but it was going to be much cheaper to replace the HD myself than it would be to send it in for a MLB replacement. So I ordered a new HD (80G) and a USB-to-ATA/SATA adapter. I hoped that I would be able to use the adapter to savlage a bit more data off the drive (it originally failed right before a backup!).
    After extracting the HD (40G), I connected it to the USB adapter and was able to access the drive just fine. I used another machine to run another backup from the recently removed HD (40G) to one of my FireWire backup drives and proceeded to put the iBook back together with the new HD (80G).
    Once it was all back together, the new HD worked fine. I was able to restore the recent backup from my FireWire drive to the internal, and it worked fine. The only oddity I noticed was that the new drive was apparently trying to sleep several times a minute. I used smartctl (installed via MacPorts) to adjust the power management setting on the drive, and that seemed to help. I also started running smartd (also via MacPorts) to better monitor the new drive.
    Recently, a bit more than six months after the new HD was installed, the new HD started showing errors in the system.log. I never found any errors in the logs after the previous HD failed (even though I could look through the logs just fine with the drive attached through the ATA-USB adapter).
    Jul 2 18:04:40 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 2 18:33:43 Blinky smartd\[217]: Device: disk0, ATA error count increased from 0 to 30\n
    Jul 3 02:03:42 Blinky smartd\[217]: Device: disk0, ATA error count increased from 30 to 31\n
    Jul 3 03:03:42 Blinky smartd\[217]: Device: disk0, ATA error count increased from 31 to 32\n
    Jul 6 23:33:42 Blinky smartd\[217]: Device: disk0, ATA error count increased from 32 to 33\n
    Jul 7 00:33:42 Blinky smartd\[217]: Device: disk0, ATA error count increased from 33 to 34\n
    Jul 7 12:42:24 Blinky smartd\[217]: Device: disk0, ATA error count increased from 34 to 36\n
    Jul 7 13:17:59 Blinky kernel\[0]: disk0s3: I/O error.
    +same error message a bit faster than one every 3 seconds+
    Jul 7 13:23:00 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 7 13:33:44 Blinky smartd\[217]: Device: disk0, ATA error count increased from 36 to 615\n
    Jul 7 21:17:05 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 7 21:17:12 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 7 21:17:12 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 7 21:17:12 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 7 21:17:15 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 7 21:17:18 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 7 21:17:21 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 7 21:17:23 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 7 21:17:29 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 7 21:18:17 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 7 21:19:21 Blinky kernel\[0]: disk0s3: I/O error.
    Jul 7 21:19:23 Blinky kernel\[0]: disk0s3: I/O error.
    I did not notice the errors until the afternoon of the 7th when the problem became evident. The events around 13:00 happened when I was trying to run a backup. The first backup failed in an odd way (when I came back to check on it later that evening, SuperDuper! seemed to have quit running). So I restarted the backup and started looking around in the logs. That is when I noticed the kernel I/O error messages. When I asked smartctl to query the drive, it showed that many errors had been occurring and it displayed the drive's log of the last five or so errors (alas, I did not save this output). Meanwhile the re-run of SuperDuper! was having problems again. It seemed to have hung (no SDAgent or SDCopy processes were running, but the main UI was still there). Since the backup was not getting anywhere, I decided to shutdown for a while and try again later.
    When I did try again later, I was back in the situation of six months ago. It would not boot at all (no internal, no FireWire, no CD/DVD, boot menu hangs, Target Disk Mode hangs). So, I opened up the system, removed the HD and put it back together without an internal HD. The machine is now able to boot and run from FireWire. Again, the (6 month old, 80G) HD "works fine" via the USB adapter. If SMART were available through the USB adapter, I could check to see if the drive is continuing to have problems. I used SuperDuper! to copy the HD to a volume on my FireWire drive which is how I an now running the system.
    Has anyone had any similar problems? Any idea why my iBook seems to be killing/rejecting hard drives? (I say killing because, while the drive is connected internally, it certainly seems to be dying. I say rejecting because once the drive is out of the system, both the drive and the system seem to "recover".) I have read messages there where others report success having their iBook MLB resoldered ("reball"). Has anyone experienced substantially similar issues that were solved with a resolder repair?
    Thanks!

    I was able to test my “failing” ATA drives in a G4 Mac mini (I had to take the mini apart because its drive had finally failed). I was able to successfully boot the Mac mini with either of my iBook drives installed. Once booted, +Disk Utility+ said that each one's SMART Status was Verified. I used smartctl to pull the full SMART info while I had them installed in the Mac mini.
    Since the drives were still “good”, I think this emphasizes that the problem is with the ATA interface on my iBook's logic board. Maybe it is broken, or maybe it just needs to be resoldered. For now I am happy just booting off an external Firewire drive.
    BTW, I ended up installing the 6 month old 80G drive in the mini. It has been working OK for 10 days now. As long as it continues to operate normally in the mini, it will serve as evidence that my iBook's HD ATA controller is borked. I just hope the ATA controller is more capable of accepting its fallibility than was HAL.
    There is a minor problem with the 80G in the mini in that I am unable to use hdapm to change the aggressive head unloading that the drive suffers. I was able to adjust it with hdapm while it was in my iBook. I am able to adjust it with hdparm under Linux on the mini. Luckily the change I made while booted in Linux "sticks" after rebooting back into Mac OS X (I hear it will be lost if the drive is completely powered off though).

  • "The attempt to burn a disc failed. The device failed to respond properly"

    Hello everyone,
    I have suddenly developed a problem when trying to burn a CD. I get the "Checking playlist" and "Initializing" messages, and then Writing...(the name of the first track)", but about 20 seconds later, just when seems as if it will start burning, the CD is ejected and I get the following message: ""The attempt to burn a disc failed. The device failed to respond properly, unable to recover or retry."
    I have browsed the forums here and it seems that many other people have had similar problems. I am running a Powerbook G4, OS X version 10.2.8, iTunes 6.0.5.
    I have used several different brands of media, and many slower burning speeds, but nothing helps.
    I can still listen to CD's with my computer, just not burn anything.
    My computer is about 5 years old. Do you think that this problem is suddenly occurring simply because my optical drive needs to be replaced?
    Also, another issue, possibly related, but maybe not, is that, after my burn failed for the first time, I put in a completely different CD to see if it would play. It did, but instead of listing the correct tracks on the CD, it showed the tracks of the previous playlist that had the failed burn.
    For example, I imported the tracks from one CD into my Library, then moved them to a playlist. When I tried to burn the contents of that playlist to a CD, I received the "attempt to burn failed" message that I previously described.
    Then, I inserted a completely different disc, but iTunes read it as having the same contents of the playlist that had failed to burn, but when I clicked on the track titles, they played from the new CD that I'd inserted, not the failed playlist. So although the titles indicated that I was working with the failed playlist, the media that played was from the new CD.
    Any suggestions would be greatly appreciated!
    Sarah
    Powerbook G4   Mac OS X (10.2.x)  
    Powerbook G4   Mac OS X (10.2.x)  

    I'm having a similar problem. In my case, the problem started about two months ago. I regularly update software. Currently I'm at 10.4.10 and iTunes 7.3.2(6).
    In my case, I'm trying to backup recent iTunes purchases. I'm unable to burn CDs with the original combo drive (CD) or my internal NEC burner (DVDs). I get a series of coasters. Occasionally .Mac Backup fails as well. Toast 7 works fine. Even stranger, I can burn 1 DVD successfully with an external Pioneer DVD burner (4x) USB 2 using iTunes. (I have a belkin USB 2 card) Multiple DVDs fail. I recently switched to this PowerMac from an iBook and several preference files were copied with my home directory during the transition. The external drive was used with the iBook, but not on this system before which may lend to the preferences file as a possibility.
    However, I find it odd that my external drive works and both internal drives are failing. I was suspecting the IDE controller on the logic board, except that Toast works. This logic board is not as old as the computer. It was a replacement in 2005 when an after market ATI card fried and took it and the power supply out. At first I suspected a hardware problem and replaced the IDE cable which looked warn. The NEC drive is about two years old and the combo drive is the original. They are on the same controller.
    In my case it is certainly possible the drives or controller are starting to fail. I wonder if anyone else might have an external cd/dvd drive they could test that are having the problem.

  • Why is CS6 on trial when I've had it for a year

    Last year i started my game programming course and got a CS6 master collection code that I used and then a few months later they told me to create an account which I did. I then used my code again attaching it to my account instead of just my computer. Now its September again almost a year since I initially redeemed the code and I'm on the trial of CS6. It never said any where that all i had was a 1 year subscription and i was under the impression I had CS6 permanently. To make things even worse I sign in to view my products and apparently I've never had CS6 before.

    These keyboard are not forever.  I had one fail and Loditech offered to give me a new one, but I didn't have the receipt.  I sucked it up and bought another one. A new one can be had for $70-$100 and there are several on eBay for around $25.

  • T440p, WIndows 7: Fingerprint Reader Fails on First Attempt to Log In, Works on Second After Delay

    I have a T440p with Windows 7 Pro.  Except on rare occasions, I am unable to log into Windows with my first swipe across the fingerprint reader.   The green light is on when I do the first swipe and it immediately goes off and stays off for around 15 sesconds, during which time another swipe does nothing.  Then the green light will return and a second finger swipe will log me on.
    Any suggestions on fixing this would be appreciated.  It's made using the fingerprint reader for login impractical, because it's faster to just go to the password screen and log in that way.  Thanks.
    Thinkpad T440p: i7-4800MQ | Crucial 16GB DDR3-1600, 9-9-9-24 | Samsung 840 Evo 500GB SSD | Intel 7260 Dual-Band AC Wireless | Windows 7 Pro
    Thinkpad X120e
    Thinkpad T61p
    Solved!
    Go to Solution.

    I do see a several second delay before the fingerprint reader green light comes on after the login screen appears, but it's no where near as long as the delay I was previously seeing between the first failed swipe and waiting for the light to come on again.  The new driver is a great improvement and make the fingerprint reader work as I recall when I first purchased the T440p--though possibly a bit slower to light up after the login screen appears.  It would be great to see the fingerprint reader light come on more quickly after the login screen appears, but that's a minor thing compared to the failure on the first swipe.
    Thanks again for giving us the opportunity to try this driver out.  So far, after a day of use and several times coming out of sleep, I haven't had any failed swipes.
    Skoop wrote:
    sog, some feedback on that driver:
    The installer runs but doesn't give any prompt that it has finished.  I was waiting for something to show, after the progress bars, but it just quits.  Before I restarted, I checked the driver version and saw the new one, so I figured that was all that was going to happen.  Driver is v.285, dated 1/29/15.
    Restarted the PC and then put it to sleep (deep sleep mode/Intel Rapid Start).  First swipe does indeed work to login thereafter.
    But:  It takes longer for the FP reader light to come on now.  I think it's that same 15 seconds mentioned above.  With the previous driver, the scanner light would come on almost right away with the login screen, but the first swipe wouldn't do anything.  Once the light came on again--that period of seconds, the swipe would work. 
    With this new driver version, I think that what's changed is that the light simply doesn't come on until whatever is going on in the background has completed.  So, in effect, getting a desktop takes the same amount of time, but with only a single swipe.  --Which isn't a complaint that a login should be able to be effected more quickly with the FP scanner.  Perhaps it can't.  Just reporting how it works now.
    journeyman, your take?
    Thinkpad T440p: i7-4800MQ | Crucial 16GB DDR3-1600, 9-9-9-24 | Samsung 840 Evo 500GB SSD | Intel 7260 Dual-Band AC Wireless | Windows 7 Pro
    Thinkpad X120e
    Thinkpad T61p

  • CP3 Buttons fail to pause?

    I have a captivate 3 project where I have 5 buttons on the time line. All five start at the beginning of the slide, all pause at the same time, all end at the same time. (slide is 2 sec long, buttons pause at 1 sec)  If you click on a button all jump to a different slide in the same project. I have about 20 slides set up like this. Problem: random people in my organization have told me that when they get to some of these slides, the project does not pause and just goes to the next slide.
    I did a project last year and had no issues like this. I am publishing to use Flash player 9. It seems that people who are using Flash player 9 have more problems that people using Flash player 10. I have replaced every button in the project... I still have failures.
    In the past I have had major issues when I have cut and pasted buttons and have stop using that practice.
    The project fails when running in our LMS (Pathlore 6.6)  but also if I run it outside of the LMS. I as the developer can not get it to fail.
    Anyone have any insites?
    Thank you.

    I hope this may help others.
    I still do not know what caused by buttons to fail.
    After testing people using Flash player 9 had buttons fail. If they updated to Flash player 10 no failures.
    What I did was open a new project and import the one one into the new one and now it works with both Player 9 and 10.
    Go figure.

  • Got notice that I have only 5 days to activate Photoshop 5.  Facts: new macbookPro 10.9.4 about 2 months ago (my old mac's logic board failed).

    URGENT HELP NEEDED:  got notice that I have only 5 days to activate Photoshop 5.  How can I continue using? I have an exhibit to print, deadline is one week from today (27 July 14).
    FACTS:  my old MBP had a failed logic board about 6 weeks ago.  Bought a new one with 10.9.4
    WHAT is Activation? etc.  What do I need to do that is simple and effective to keep my PS 5 rolling?
    HOW/WHERE do I find answers in this forum?  Will they be emailed to me?
    heartfelt thanks for your excellent answers. 

    Have you gone to the Photoshop Help menu and selected Help > Activate... You need an internet connection to do this. All you have to do is follow the steps.
    What is activation? Photoshop used to be unlocked with a serial number only. However software pirates simply passed the numbers around to unlock multiple copies without paying for the license.
    As of Photoshop CS3, activation requires a connection to a  remote server that validates the machine it was installed on on order to launch Photoshop. You are allowed to activate on two computers. Any change in hardware means you have re-activate.
    We are basically volunteers not Adobe employees. If you cannot activate your copy as instructed, call customer service and they can help you by resetting the activations.
    Unless you signed up for email notifications, it's best to recheck the forums to see if anyone answered your question.
    Gene

  • Repeat delta are failing

    Hello experts,
    I have an imp production issue. We had delta failing in one of LO Cockpit extractor for last 4 days.
    Message: Error occurred in the data selection
    Job terminated in source system --> Request set to red
    Message no. RSM078
    I did repeat delta (by changing status to red and deleting requests). But still I get same message.
    Please help.
    Rita.

    SM 37 LOG:
    Job started
    Step 001 started (program SBIE0001, variant &0000000017045, user ID ALEREMO
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = 2LIS_18_I0NOTIF
    RLOGSYS    = PRODCLNT200
    REQUNR     = REQU_D4VWYY4JTTY9ODFHL16WPLR5M
    UPDMODE    = R
    LANGUAGES  = *
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 0                                       *
    abap/heap_area_total.......... 8588886016                              *
    abap/heaplimit................ 40000000                                *
    zcsa/installed_languages...... 123ACEFIJKLMNOPSUVc                     *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 6500000                                 *
    ztta/roll_extension........... 2000000000                              *
    Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 1,491 records
    Result of customer enhancement: 1,491 records
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 1,491 records
    ABAP/4 processor: COMPUTE_INT_TIMES_OVERFLOW
    Job cancelled

Maybe you are looking for

  • Message MSITEM033 in New GL - Cannot Display GL Line Items

    Hi All, I wonder if you can advise me on a similar issue we are experiencing. Recently we activated the New GL. We are now configuring a new company code. I have posted documents to a GL account. I can see the items the total balances on the GL accou

  • Issue with the standard SAP Extractor 2LIS_04_P_COMP

    Hello gurus, I am working on the PP and PM module. the standard extractor 2LIS_04_P_COMP is already in use in the development system . I have made the changes to the Production Order (PO) and check the delta for the BW load the changes in the field r

  • Mail search results are not in chronological order.

    when I search for mail the results in iOS7 aren't in chronological order anymore. Both on my iphone 5 and my iPad 2.

  • Suggest me to the right way please

    Hi all, This is my first post here. Could you please suggest me which way I would go to write a game on the internet and Mobile Phone with java ? and how should I start with it? I am a very beginner. I have download SDK 1.4.1 already, Is there anythi

  • 11.0.2 build 92 sluggish on OS 10.6.3 MacBook Pro

    I recently purchased a new MacBook Pro 2.26 GHz INtel Core Duo with 4 GB ram and installed the latest version of FH. The performance is very sluggish, sometimes taking 5-10 seconds for a new document to open after pressing the command + N keyboard co