Kmem_free error in Solaris8 on Gateway PC
Get fol error on install from DCA (apr01 image):
prom_panic: kmem_free: block aready free as neighbor
This is a gateway 933 PIII. Haven't cracked case to find chipsets.
Have read posts on similar problem (U160 controller, APCI on Dell, etc). -- but only one post (Jun01) on this error message -- and no response.
Anyone know a fix?
Tks in advance ... Mike Meyer
Here's another clue ... I had one stick of 128MB 133MHZ memory in the machine... I put a second stick of the same in the second slot.
It got past the error and started the install process.
However, the screen looked fuzzy so I shutdown and (on a hunch) checked the new RAM stick. It wasn't fully seated.
I fully seated and rebooted ... same error as the first post.
So when the second slot is engaged (but not properly), the boot works.
With 256MB properly installed memory it doesn't ... too strange.
Any thoughts out there? I've got to make 92 of these at different sites work, and the current process isn't safely reproducible!
Tks ... Mike Meyer
Similar Messages
-
Error while installing SAP Gateway
Hi,
I am getting the following error while installing SAP Gateway.
INFO 2009-09-24 06:11:18.815
Execute step stopInstance of component |NW_Gateway|ind|ind|ind|ind|0|0|NW_GW_Instance|ind|ind|ind|ind|7|0|NW_Instance|ind|ind|ind|ind|0|0
INFO 2009-09-24 06:11:19.238
Creating file C:\Program Files\sapinst_instdir\NW04S\STANDALONE\GW\stop_QAS_G00.log.
ERROR 2009-09-24 06:11:19.238
FSL-06002 Error 216 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (310), with parameter (E:\usr\sap\QAS\SYS\exe\nuc\NTI386\stopsap.exe ...).
ERROR 2009-09-24 06:11:19.238
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-09-24 06:11:19.253
FCO-00011 The step stopInstance with step key |NW_Gateway|ind|ind|ind|ind|0|0|NW_GW_Instance|ind|ind|ind|ind|7|0|NW_Instance|ind|ind|ind|ind|0|0|stopInstance was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
Regards,
RajivHi Sunny,
This installation is being done on windows.
The logs are
Preprocess of component |NW_Gateway|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
INFO 2009-09-24 06:11:18.643
Copied file 'C:/Program Files/sapinst_instdir/NW04S/STANDALONE/GW/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/STANDALONE/GW/keydb.2.xml'.
INFO 2009-09-24 06:11:18.784
Copied file 'C:/Program Files/sapinst_instdir/NW04S/STANDALONE/GW/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/STANDALONE/GW/statistic.5.xml'.
INFO 2009-09-24 06:11:18.815
Execute step stopInstance of component |NW_Gateway|ind|ind|ind|ind|0|0|NW_GW_Instance|ind|ind|ind|ind|7|0|NW_Instance|ind|ind|ind|ind|0|0
INFO 2009-09-24 06:11:19.238
Creating file C:\Program Files\sapinst_instdir\NW04S\STANDALONE\GW\stop_QAS_G00.log.
ERROR 2009-09-24 06:11:19.238
FSL-06002 Error 216 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (310), with parameter (E:\usr\sap\QAS\SYS\exe\nuc\NTI386\stopsap.exe ...).
Regards,
Rajiv -
Error"Max no of gateways exceeded (100)
Hi All,
We have two apps servers on our sap production system. I couldn't login in one of the app server through SM51 .when I tested the Internal RFC in SM59 I got this error-:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: max no of gateways exceeded (100)
Error Details LOCATION: SAP-Gateway on host hkbisrapl2 / sapgw02
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 52597
Error Details MODULE: gwxxrd.c
Error Details LINE: 8438
Error Details RETURN CODE: 631
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Sat Feb 14 13:00:36 2009
Error Details VERSION: 2
Pls suggest me the solution.
Regards,
PrashantNo, its R3 Production server. Internal RFC for one of the app server is giving this error.
When I tried to set the following parameters in the instance profile of the same I again got the same error while saving the profile.
Can I make the changes in instance profile of app server at OS level?
Profile parameters-: (On Application Servers)
rdisp/tm_max_no 5000
rdisp/max_comm_entries 200
Pls suggest.
Regards,
Prashant -
Error invoking CFC for gateway
Am getting the following error while invoking the event
gateway
"Error invoking CFC for gateway myGateway: Event Handler
Exception. An exception occurred when invoking a event handler
method from Application.cfc The method name is: onRequestStart."
Please adviceI am getting an error like this when my eventgateway gets invoked for directorywatch:
Error invoking CFC for gateway watchInboundFiles: null {GATEWAYTYPE={FileWatcher},ORIGINATORID={},CFCMETHOD={onDelete},DATA={{FILENAME={/Users/y oosafabdulla/Sites/bahuvlintbeaches-staging/int/core/internationalBeaches/iptv/dw/1_vod_xm l.cfc},TYPE={DELETE}}},CFCPATH={/Users/yoosafabdulla/Sites/bahuvlintbeaches-staging/int/co re/internationalBeaches/iptv/dw/directory_watch.cfc},GATEWAYID={watchInboundFiles}}.
I just want to dump the cfevent data into a text file. -
Error while using tranaparent gateways.
Hi All,
I have sql server source and i am using transparent gateways to connect to sqlserver from Oracle(not OWB).
I have created view on Oracle database for the sql server tables. i was able to query the view which i created for sql server sources.
i have created a simple pass through mapping using that view. when i try to deploy that mapping, it is shwoing error message "table or view doesn't exist". when i look into oracle package for the error lines, they are pointing to view which i created for sql server tables.
Please help me ouit what i am missing.
Thanks,
ChanduHi All,
I got the solution. I didn't have permissions on the view.
Thank you all.
Chandu -
Error in destination tab gateway cockpit SMP 3.0 SP05
Hi Experts,
I created a destination in destination's tab and it was working fine. But now, I'm facing error when trying to connect to the destination. I have attached the screen shots . I restarted the SMP server and got the error as shown in the image . Before restarting I was getting unknown host proxy error.
Any idea what must have went wrong ?That is strange.
To be on same note, you are getting above error only while pinging the destinations and accessing respective services.. right?
Do you have any other Odata service(s) exposed via IGW and doesnt nee any destination details? Lets say exposing SOAP WS into Odata services (How to connect SOAP WebServices with Integration Gateway in SMP3). Are you able to open and get entity set info for this?
If possible, please raise an OSS ticket. Meanwhile lets hear from Bjoern Woppmann
Message was edited by: Jitendra Kansal -
Error trying to configure gateway, no
Running Siebel gateway configuration. Redhat Linux 86-64, Oracle db 11g R2.
Upon adding all responses in the gui to perform the config, the following error:
+"Siebel configuration wizard failed with error. Please see the log files for details."+
I am unable to even find the sw_cfg_util.log file to even debug.
I ran evt in the gtwysrvr/bin dir and got the following error messages. Not sure if that is the cause or not.
/8.2.2.0/ses/gtwysrvr/bin> evt
Running checks defined in file [evt.ini]. Please wait..
srvredit: error while loading shared libraries: libssscscf.so: cannot open shared object file: No such file or directory
srvredit: error while loading shared libraries: libssscscf.so: cannot open shared object file: No such file or directory
srvredit: error while loading shared libraries: libssscscf.so: cannot open shared object file: No such file or directory
©1990, 2006, Oracle. All rights reserved. The Programs (which include both the software and documentation) contain proprietary information; they are provided under a license agreement containing restrictions on use and disclosure and are also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or decompilation of the Programs, except to the extent required to obtain interoperability with other independently created software or as specified by law, is prohibited.
Environment Verification Summary Report for [sali-lab.ucdenver.pvt]
Report Run by [oracle] on [Thu Aug 2 12:33:00 2012]
Installed Version [NOT DETECTED] Installed Build [NOT DETECTED]
Running a [8.0] version validation with [VAN] flavor
Total Checks : 5
Checks Passed : 1
Checks Failed : 4 (1 critical failures, 3 warnings)
Checks Skipped: 0
Critical Failures:
Environment Settings
Please upgrade Operating System version to 2.6.5-7.97-bigsmp - the current version is 2.6.18-308.11.1.el5
Complete list of checks:
Environment Settings
Please upgrade Operating System version to 2.6.5-7.97-bigsmp - the current version is 2.6.18-308.11.1.el5
The current value of SIEBEL_OSD_LATCH is not defined
The current value of SIEBEL_OSD_NLATCH is not defined
Environment variable SIEBEL_MEMORY_ALLOCATOR has correctly not been defined
Please set Environment variable SIEBEL_ASSERT_MODE to 0 - currently the value is not defined
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
Please advise.I did find the logs. Thank you. What should I be searching for in those? I also found 2 .err files. Contents of each are as follows:
oraInstall2012-08-01_01-23-23PM.err
*"chmod: cannot access `/u01/app/oracle/product/MDM/Siebel_Linux_Image/8.2.2.0/ses/jre': No such file or directory"*
oraInstall2012-08-01_01-40-07-PM.err
"No checks to execute for entry points. Please check input files"
Can you provide any insight on what I need to do? I would have assumed on install that the jre was installed. Is that not correct? -
ADF MOBILE Browser application throwing Error HTTP 502 Bad Gateway
Downloaded "mobile banking Sample" from ADF Mobile Homepage, imported into JDeveloper 11gR2. Started MDS-CS, started built-in Weblogic application server. The deployed application Welcome.jspx displays correctly in a stand alone browser. However, surprisingly the same URL when typed within Blackberry Simulator browser HTTP Error 502: Bad gateway is thrown. I know its not a proxy issue since I can navigate to google and MDSCS admin page. Please advise where we are going wrong?
Note. since this is urgent I wanted to put across as much information as possible - so created a document with screen shots and added it as attechment to Oracle Support issue#3-4905845711.web browser returns 502 Bad Gateway errorHuh? I would expect a "page is taking too long to respond" error.
Seems to me like you need support for background jobs. It would work something like this:
- do request to server, either direct submit or Ajax call
- that request, after validating of course, will start a background job. In a thread, through a job scheduler, whatever, as long as it is not the servlet that is actually executing the job. The servlet immediately returns after starting the background job.
- webapp can show running jobs and through Ajax infrequently polls to see if running jobs are either done or they blew up with an error
- you can see the results after a job has finished running
This kind of "detached" system has many problems that need to be taken care of, for example taking care of resubmission. If you maintain persistent bookkeeping about jobs, a server shutdown can make the bookkeeping and the running state go out of sync. But programming is hard, this is the fun side of the job. Doing stuff you actually have to think about! -
Error when executing Integration Gateway service
Hello,
I created a service on IGW to expose an oracle db as odata but i'm getting the following error when i call it from the browser:
<error><code/><message xml:lang="en-US">An exception occurred.</message></error>
The service itself is working. Its destination is reachable from the IGW's management cockpit test, and its url returns the service description when executed from the browser. The error happens when i try to access an entity within the service, as in:
https://smp3url:8083/gateway/odata/SIST/ODATATEST;v=1/Solicitacao/
I checked SMP's logs and found two possibly related error entries. The first is from execution of my custom script. I had to create a script to map the entity set names to actual table names in the database (their full name: schema + table name).
2015 04 07 15:41:29#0-300#ERROR#com.sap.gateway.ip.core.customdev.processor.IGWScriptProcessor##anonymous#http-bio-8083-exec-5###[Gateway][TECHNICAL][TechnicalError]:This is first log
2015 04 07 15:41:29#0-300#ERROR#com.sap.gateway.core.odata4sap.ODataErrorCallbackImpl##anonymous#http-bio-8083-exec-5###handleError(): failed to serve request for URI https://smp3url:8083/gateway/odata/SIST/ODATATEST;v=1/Solicitacao, message = An exception occurred.
Thanks,Thanks for the tips guys.
Jitendra, i can't connect to my database with that string format. I need to use a tns name format, such as:
jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MyHost)(PORT=MyPort))(CONNECT_DATA=(SERVICE_NAME=MyOracleSID)))
I couldn't find a way to define the schema for this. I think i've passed this issue anyway. After the implementation of the custom script i stopped receiving an "Oracle - ORA-00942 : table or view does not exist" error from the service.
Midhun, i increased the log level but i couldn't find anything interesting in SMP's server logs. Still, i found this error message on the troubleshooting session of IGW's cockpit:
com.sap.gateway.core.api.provider.data.GenericODataProcessor: readEntitySet failed: entity set = Solicitacao, content type = application/xml;charset=utf-8, message = org.apache.olingo.odata2.api.ep.EntityProviderException: An exception occurred.
Is it a problem with the service itself then? This is interesting because i'm getting these errors when generate the integration content on my project. I was actually ingnoring them because the deploy was still successful. -
Error: Connect from SAP gateway to RFC Server failed
Hi
I am trying to connect SAP server using the java (JCO connection), and getting following error. While I am able to connect to the same sever using SAP Logon pad with the same ipaddress (hostname) and logon credentials.
Please kindly help.
Erro: Connect from SAP gateway to RFC server failed.
Connect_PM GWHOST = hostname, GWSER = sapgw03, ASHOST=hostname, SYSNR=03
LOCATION SAP-Gateway on host hostname / sapgw03
ERROR timeout during allocate
TIME Wed Oct 31 05:31:45 2007
RELEASE 640
COMPONENT SAP-Gateway
VERSION 2
RC 242
MODULE gwr3cpic.c
LINE 1795
DETAIL no connect of TP sapdp03 from host hostname after 22 sec
COUNTER 3Hi K Patil,
Acording to me you are faceing this issue because the entry of your backend System is not in the SLD (System Landscape Directory ) of your server.
to make this work you have to make entry in the SLD of your server
fort that plesae acess this link.
Re: JCo connection Error
Re: wt is SLD.. how to do configure it
Please Reward Points if Helpfull.
Regards
Vinit
Edited by: Vinit Soni on Dec 19, 2007 7:20 AM -
Getting Started error when starting messaging Gateway on Unix
HI all.
We are having difficulties with getting messaging gateway set up on unix.
We are following the DocId Note:212587.1
The error we are getting is when we try and start the gateway.
ORA 6520 pl/sql error loading external library line 33
ORA 6512 sys.mgwi_admin
help
Thanks
kdigmanHI all.
We are having difficulties with getting messaging gateway set up on unix.
We are following the DocId Note:212587.1
The error we are getting is when we try and start the gateway.
ORA 6520 pl/sql error loading external library line 33
ORA 6512 sys.mgwi_admin
help
Thanks
kdigman -
I have created an account in Office 365 to try Power BI, and have set up the Power BI site so far.
Now i want to add few data sources, for which i guess i would need to do the following:
1) Create a gateway (i have done this)
2) Download and Install the gateway on my local machine (Installed on my 64bit windows 8.1 laptop)
3) Run Data Management Gateway configuration manager wizard to setup up the gateway.
At this step, when i enter the Gateway Key (copied from the Power BI Site), i am getting error "unable to obtain the anti-forgery token from Host Service".
Where should i head next?
Vishal SoniHey Hubery,
Its working now. Thanks for the tips.
Few things that i learnt here:
1) You'll need to turn the firewalls off for the local system. (I am not sure if this is required, but i just did this and it started working for me).
2) When you are creating the gateway on Power BI site, you click on Create new gateway, and it shows you the security key. Previously i just copied and saved this key and click Finish at this step (which i guess should not be done). What we need to do is
to keep this screen ON, download and run the Gateway setup wizard and complete the setup, while keeping the page open in power BI site.
I am getting the Gateway up and running now.
Vishal Soni -
Compilation Error with Solaris8
Hi ,
I am getting a queer compilation error when compiling a simple C++ program on
Solaris8 . The error does not occur with solaris7 . I have inclued the program
and the error message . Can you give me some tips to overcome this problem .
#include <iostream.h>
int main ( void)
cout << "hello world" ;
/*************COMPILATION ERRROS ***************/
"/usr/include/iso/wchar_iso.h", line 100: Error: Multiple declaration for mbstate_t.
"/opt/SUNWspro/SC5.0/include/CC/./iosfwd", line 51: Error: The name mbstate_t is ambiguous, std::mbstate_t and std::mbstate_t.
"/opt/SUNWspro/SC5.0/include/CC/./iosfwd", line 78: Error: The name mbstate_t is ambiguous, std::mbstate_t and std::mbstate_t.
"/opt/SUNWspro/SC5.0/include/CC/rw/iotraits", line 56: Error: The name mbstate_t is ambiguous, std::mbstate_t and std::mbstate_t.
4 Error(s) detected.
Regards,
vichuThanks! However, my sample code does not inclide iostream.
#include <string>
main() {
string s = "123asd";
exit(0);
and there is the output
hwang@jazz: /opt/SUNWspro/SC5.0/bin/CC test.C
"/usr/include/wchar_impl.h", line 24: Error: Multiple declaration for __mbstate_t.
"/usr/include/wchar.h", line 90: Error: Multiple declaration for mbstate_t.
"/opt/SUNWspro/SC5.0/include/CC/./iosfwd", line 37: Error: The name __mbstate_t is ambiguous,
__mbstate_t and __mbstate_t.
"/opt/SUNWspro/SC5.0/include/CC/./iosfwd", line 45: Error: Multiple declaration for mbstate_t.
"/opt/SUNWspro/SC5.0/include/CC/rw/iotraits", line 37: Error: The name __mbstate_t is ambiguou
s, __mbstate_t and __mbstate_t.
"/opt/SUNWspro/SC5.0/include/CC/rw/iotraits", line 57: Error: Multiple declaration for mbstate
_t.
"test.C", line 4: Error: string is not defined.
"test.C", line 4: Error: Cannot use const char* to initialize int.
8 Error(s) detected.
Any ideas?
Thanks again -
Error accessing docs outside gateway
Hello all.
I have a Remote data source on an NT box. I have set the crawler not to open the files on it through the gateway.
The crawler brings the files in OK, but when I click on a link to any of the files I get this error:
Server Error in '/portal' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested Url: /portal/docfetch/DocFetch.aspx
The URL I am trying to open is this:
docfetch/DocFetch.aspx?path=%5C%5CWSSGIRAUDO%5Cfil
es%5Chello.txt&signature=632315571489375000&locale
=en
Any ideas?Is the URL you are providing in the Data Source correct? Also, if you choose not to use the gateway, make sure you have "Use remote web server to serve documents" on the advanced settings screen in the Data Source and the URL you provide, is a Web URL. This is taken from the Windows CWS 6.0 install guide:
Click-through to the documents is fetched through the portal gateway via a regular share or via a Web share. If you are using a Web share, then click-through to the document is served from a Web URL. The base URL for the documents is the URL entered here. This Web server should be setup allowing document browsing for the target of the crawl.
If you are using a Web share, the URL should at least include one directory within it. For example, it must not simply be http://mysite/, it must be at least http://mysite/directory1/. In addition, the user must make sure that a regular share mirrors the web share that exists. If you would like to crawl http://mysite/directory1/, the data source user can also access a share named \\mysite\directory1.
I hope that helps a bit. -
Hi,
I am getting "prom_panic: kmem_free: block already free as a neighbor" error when install tries to load the secondary boot.
HW description:
Compaq Proliant 7000 server
4 Gb RAM
3100ES controller
using 1 9.1 Gb drive in the array (port 1)
Latest ROM, APCI turned off, took out network cards. Please help!
Ilia Serebrennikov
[email protected]Here's another clue ... I had one stick of 128MB 133MHZ memory in the machine... I put a second stick of the same in the second slot.
It got past the error and started the install process.
However, the screen looked fuzzy so I shutdown and (on a hunch) checked the new RAM stick. It wasn't fully seated.
I fully seated and rebooted ... same error as the first post.
So when the second slot is engaged (but not properly), the boot works.
With 256MB properly installed memory it doesn't ... too strange.
Any thoughts out there? I've got to make 92 of these at different sites work, and the current process isn't safely reproducible!
Tks ... Mike Meyer
Maybe you are looking for
-
Transaction timeouts behaviour - explanation needed
Hello all, I'm a newbie to Weblogic and would like to understand how transaction timeouts work in Weblogic. I have a EJB2 application running under Weblogic 10.3 and using Oracle 11g database via thin jdbc driver. I noticed that if I set trans-timeou
-
I have been working on a script that copies images from one frame to another. When I use the term select item 1 of page item "frame1" I am selecting the frame itself and not the image inside. Any help would be greatly appreciated.
-
Multi Select Item to be passed in URL ( Please help urgent)
Hi , I have an item P1_PRODUCT('SOAP','PASTE','BRUSH') in page 1. User selects multiple products and submits and a report is displayed . I have an hyper link on one of the column and when user clicks this > target is URL and i have passed P1_PRODUCT
-
Hi! Can anyone please provide me a function module, or table, where the cost centre structure can be found? This structure can be maintained with transaction OKEON, and I have to read it in my program. Thank you Tamá
-
I locked my ipad and now it wont turn on ?
It is definitely not flat. The screen is black - it appears to be dead. I have tried waiting, holding on/off for 10 seconds or more. I'm not sure what else to do. I have a smart cover and I closed this which locked my Ipad. Has anyone else experience