KMS Host activation in Server 2012 R2 and Client Win7
Hi We are planing to Activate the windows 7 with Server 2012 R2 , Do we need 25 Win7 Machine minimum to activate the Key,? or we can have sround 10 servers 2012 r2 machine + 19 win7 machine to active the key for both Win7 and server 2012 r2..?
as long as you have more than 25 Machines both client and server os:es will be activated.
It's all explained here:
http://technet.microsoft.com/en-us/library/ff793434.aspx
Similar Messages
-
I have windows server 2012 R2 and install active directory
My question is I install active directory in windows server 2012 R2 and create Group Policy. ( These set-up is only for test)
Have not registered domain only install active directory to test.
So the problem is when I created Group policy for my user and put software restriction policy but its affected to my administrator accounts too, No when I open VMware (install Virtual Machine windows XP) and start os then its shows you can not user this
software as you restricted from installing software (Something like that don't know exact Error). I could not start installed Virtual Machine.
Please give me a solution for this.
This is the setup for a test use only so their not big environment connect with my pc.
Thanks in advance.
Regards,
KrunalHi,
The following article is talking about creating and managing Group Policy on a Windows Server 2012:
http://www.thomas-krenn.com/en/wiki/Creating_and_managing_a_Group_Policy_on_a_Windows_2012_Server
As Darren Blanchard mentioned, if you want to apply the GPO, you could link it to an OU that contain the computer or user.
Group Policy Overview
http://technet.microsoft.com/en-us/library/hh831791.aspx
Please feel free to let us know if you need further assistance.
Regards.
Vivian Wang -
Active Directory - Server 2008 R2 and 2012 R2 (Server Formatting or not productive
Hello guys, I come here to try to clarify a great doubts regarding Server Operating Systems, I will attempt to detail the most of my scenario.
Suppose I have a Server 2008 R2 in production, and this is my Active Directory server (meudominio.local) and am managing through Group Policy settings my workstations that are around 60-70 computers, guys my doubts the thing is, if I need some time to format
and perform a fresh installation of my server as it will be my Active Directory? Of course I will have lost my domain controller and I have to accomplish the placement of each workstation again that enters my domain one by one.
I know there is the option of AD replication, so we call the Active Directory, even for another version of the Operating System, prátia already realized this, but it most often comes not functioning properly, done without replication problems Server 2003 to
2008 R2.
Guys like to know a solution to not having to put my plants in my domain network again one by one, is there any way to backup so that when I reinstalled the system and the AD again in my server stations return to "see" again that server as your domain
controller, even me installing AD with the same domain name before this formatting stations do not respond to this driver in this case do the Network ID or add the station to the area again, so she creates a new user profile for example (Max.meudominio) while
your old profile "guy" still remains on the machine, I adopted the practice of editing the record of this newly created profile and pointing him well for the old user folder which contains all data and settings, eg edit my key "ProfileImagePath"
regedit logged in with the newly created profile (Max.meudominio) ->
(switch "ProfileImagePath" C:\Users\Max.meudominio) thus pointing to the folder before replacing in the field again this season after formatted server, thus ->
(Switch "ProfileImagePath" C:\Users\Max), detail that we give permission for all such user "C:\Users\Max" folder, after that restart the computer and he comes back with the user profile and all your settings.
I wonder if there is another method to perform this procedure, do not know even a backup AD to not have to replace all the seasons again "meudominio.local".
Thank you for your attention!
Translation with Google translator! Sorry.
Matias Duarte Coordenador de Suporte Dual Solucoes® | Soluções em tecnologia da informaçãoAs the practice of replication I know her mostly said she has some flaws when I do the replication of my domain to another server but it works correctly, so having a server "master" and the other ServidorBKP as "slave", in redundancy,
the problem is when I say, and put the "ServidorBKP" being my primary domain controller and disabling my main controller, to disable or turn off my main controller the stations themselves are unable to login because it does not communicate with the
my ServidorBKP "slave" even I put it as the main driver of course.
Regarding the System State as far as I know this option existed in Server 2003.
I also got some information, confer on the links below.
http://msdn.microsoft.com/en-us/library/bb727048.aspx
http://technet.microsoft.com/pt-br/library/cc758435(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/cc961934.aspx
I'm still researching other ways, getting communicate any news to everyone. (Google Translate)
Matias Duarte Coordenador de T.I. Dual Solucoes® | Soluções em tecnologia da informação http://www.matiasduarte.com.br -
Setup Microsoft Office 2013 KMS Host on Windows Server 2008 R2
Hi all,
hope someone can help, banging my head against a brick wall here.
Followed this excellent article here -
http://blogs.technet.com/b/odsupport/archive/2013/01/03/how-to-setup-microsoft-office-2013-kms-host-on-windows-server-2008-r2.aspx#pi47623=1
Dont need to install 275817 as its already applied to the server that has the KMS install on it.
When i get to step 3 and double click the exe from the MSDL site i get the cscript window but nothing happens, the window stays blank and then closes, i never get the prompt to enter the licence key for Office 2013 KMS key.
Its a Windows server 2008 R2 install, fully patched and rebooted.
Checked the logs and can find nothing, has anyone seen this or know a fix?
Thanks in advance.Hi,
Thanks for your post.
Please refer to this MS article and try again.
Prepare and set up the Office 2013 KMS host
https://technet.microsoft.com/en-us/library/dn385356.aspx#BMK_PreparetheKMSHost
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hyper-v Role in Windows Server 2012 foundation and Essentials
Hello,
I have seen that the two low cost version of Windows Server 2012 essential and Foundation) will not support hyper-v. Can you please tell me what it means exactly :
Can you please tell me what is possible :
-The server can not be installed as a hyper-v guest (probably yes)
-The hyper-v role can not be installed on the server (so I have to rely on vmware)?
- Hyper-v role can be installed but there is no free license included with the server.
Thank you
MarcI suppose then, you would have to install Windows 8 and Hyper-V as your guest or core.
Then run your Server 2012 Foundation under Win8. which has 512GB Memory Limit.
It seems asinine that you cannot install this role on Foundation, but seemingly you could work around it with Win8. (Or Sun Virtual Box (free) (or VmWare(Free).
So load up a dozen Win8Pro virutal sessions on that Win8 VirtualBox with up to 512GB Memory and Create your own Ghetto Remote Desktop Server with Foundation and Windows 8. ;)
What good is it if your can't run Hyper-V and Remote desktop services? Those are the two apps small business need most. But Microsoft strips it out, calls it a DEAL (Essentials and Foundation) , yet if you want the good stuff, you're gonna
have to buy Server 2012 Standard anyhow, + the CALs.
So you are hooked into this "deal" by Microsoft Special Offer. Its special alright, because you get to buy it twice. The stripped down version that come with your server, then the full version when you discover Foundatoin and Essentials gives
you AD, and thats it. Nothing Else. No "deal"
Remember:
All you get with Foundation or Essentials is AD and Group Policy.
You cannot load RDP on Foundation or Essentials
You cannot load Exchange on a DC, or Foundation or Essentials
You cannot load Exchange and RDP on the same box.
You cannot have Remote Web Apps if you load RDP on your DC.
You cannot win with Microsoft. No worthwhile "deal" has ever come out of the city of Redmond.
The internet is a one-way money pipeline to Microsoft.
Its three times the work, three times the cost and requires three servers licenses to do with 2012, what you could do with one 2008R2 license.
Might as well purchase 2 Server 2013 Standard Editions if you want:
1.) Active Directory
2.) Remote Desktop and Remote Apps
3.) Your own Exchange Server
You are better off installing a NAS if all you need is a file server.
Why bother with Foundation or Essentials? Its a "Gimmick-ware" -
Windows Server 2012 Standard and Essentials User CAL's
I've been running Windows Server 2012 Essentials in an organization that until recently stayed within the 25 user 50 network device limit specified by the license. Eventually we've grown beyond that. Since the Server 2012 Essentials machine had a non-transferable
OEM license I decided not to waste it by doing an in-place migration to Server 2012 Standard, and instead set up a new server with freshly purchased Server 2012 R2 Standard and migrated Active Domain roles to it, leaving the original server as a part of a
fail-over cluster.
We purchased 30 User CAL's for the 2012 R2, as required for 25+ staff members.
Now I am curious. The 2 servers that we have right now (2012 R2 Standard and 2012 Essentials) both maintain the same Active Directory and manage the same pool of users and workstations. Does that mean that the primary server with 30 User CAL's takes dominance
and sets the limit as to how many people are allowed to access the network. Or does it become a combination of purchased 30 CAL's + 25 Users hard-wired into the 2012 Essential edition?
Do these servers have to run separate domains with segregated pools of users in order to be license compliant for 30+ users or can they exist within the same same domain preserving individual user limits? What if the 2012 Essentials server maintains
one office location with fewer than 25 staff and the Standard R2 2012 server runs another office with fewer than 30 staff, while both offices are linked via a VPN for the purpose of sharing 3rd party licenses? Do individual user limits apply, or is it still
30 users max?
To sum up the question, I'd like to know whether I'd need to buy more user CAL's when we reach more than 30 staff at 1 or possibly 2 office locations.
Oh, and the device limit! 2012 R2 Standard under user CAL licensing scheme has no machine limits. Essentials is always capped at 50. When running one active directory, what's the legally allowed number of devices on the network? I assume it's unlimited.
Thanks.Thank you for the reply.
My question then is how to transition while preferably keeping both physical servers.
Should a 2012 Standard key be purchased additionally for an in-place transition of 2012 Essentials machine to 2012 Standard (which at this point is as good as a fresh install)? Until then, should the Essentials 2012 server be taken offline entirely?
What about the situation where I described both servers running segregated networks with their own pools of users, only connected via a VPN for 3rd party license sharing? Is that configuration supported?
Also, if the configurations is unsupported, why are the servers able to share roles in first place? Why isn't there a software mechanism preventing interaction? What configuration do the servers themselves assume is in place?
Thanks again. -
I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim -
I was trying to set Adobe Reader 11 as default PDF viewer on my client PCs, Please help me this. My server is windows 2012 R2 and client PCs are Windows 8.1
Hi Krisis,
I have found a forum where similar query was answered. Hope this helps.
http://www.loginvsi.com/forum/support-v4/857-adobe-reader-xi-not-set-as-default-pdf-viewer -in-server-2012-r2-rds
Regards,
Anoop -
Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10? We have a remote desktop farm setup with 2012 R2 servers and we are publishing some web links that only work with IE10. As a result, we need to
downgrade the remote desktop servers to IE10. I have a feeling that this isn't possible, but if I could get a definitive answer, I would greatly appreciate it, thank you!Hi,
Agreed with DonPick.
Internet Explorer 11 is preinstalled with Windows 8.1 and Windows Server 2012 R2.
More information regarding Internet Explorer 11, please check:
Internet Explorer 11 - FAQ for IT Pros
http://msdn.microsoft.com/en-us/library/dn268945.aspx
Best regards
Michael Shao
TechNet Community Support -
trying to activate serial number after entering redemption code and continues to say invalid serial number. Installing on Server 2012 R2 for client using RDS. HELP.....
Thank you guys for the quick answer! Muche appreciated
I've tried all suggested solutions, but no luck :-(
- tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation. All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
> is not for 2012 R2.
For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
"SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! " -
The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllecehello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer -
Server 2012 R2 and DPM 2012 (ocsetup not recognized)
I am trying to install DPM 2012 on Server 2012 R2 and unalbe to get past prerequisties check. When I try the command "OCSetup.exe SIS-Limited" it comes up that OCSetup is not recognized. How do I install (SIS) on Server 2012 R2?
Hi.
DPM 2012 SP1 is not supported running on Windows 2012 R2. Please decide on one of the following.
A) Install DPM 2012 R2 on the Windows Server 2012 R2 or other
supported operating systems.
B) Install DPM 2012 SP1 on Windows Server 2012 or other
supported operating systems.
FYI for Windows server 2012 R2 the new command is:
dism /online /enable-feature:SIS-Limited
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights. -
Error 0x80072ee7 when activating Windows Server 2012 Standard ROK
I am installing windows server 2012 standard ROK onto a HP Proliant micorsever. I installed the product key using elevated command prompt (found instructions on hp site), but when I get to the point to activate the operating system using the following
command cscript C:\windows\system32\slmgr.vbs -ato, I get an error message --> 0x80072ee7 On a computer running Microsoft windows non-core edition. Why is this happening? From prior research that I've done do I need to install a KMS Client
key and if so what is the proper key for the OS that I am using?Hi,
The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or for the Microsoft Update Web site. This error may occur if the Hosts file contains a static IP
address also might occur due to one of the following reason.
• Programs or processes that interfere with Internet communications
• Resource issues on the computer
• High Internet activity
To resolve the error examine the Host file (under System32\driver\etc folder) and check that Make sure that the file does not list any static IP entries for the Windows Update Web site or for the Microsoft Update Web site. Mean time sharing the article with
you.
1. 0x80072EE7 error code
2. KB 836941
Hope it helps!
Thanks. -
Remote Desktop Gateway on Windows Server 2012 R2 and IPAD
Hi guys,
Would love some help with an issue I been struggling for a couple of days now.
I have a RDS 2012 R2 Gateway configured and it works great with all Windows clients both internal and external communication. The problems comes now when my I want to use IPAD
from APPLE. I installed latest RD Client from Microsoft and it works great from the internal network but as soon the device is moved to an external network the client get an error while connecting. Gateway is located in the domain network.
The error is “Failed to parse authorization Challenge”,
This is what I see in the log file from the RD Client.
[2014-Mar-06 16:53:49] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-06 16:53:49] RDP (0): lo0 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-06 16:53:49] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-06 16:53:49] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-06 16:53:49] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): pdp_ip0 af=2 (AF_INET) addr=10.25.216.171 netmask=255.255.255.255
[2014-Mar-06 16:53:49] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): pdp_ip4 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): en1 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): ap1 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): en0 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): awdl0 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-06 16:53:49] RDP (0): Not using any proxy
[2014-Mar-06 16:53:49] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-06 16:53:54] RDP (0): Resolved 'MB-RDS-01.contoso.LOCAL' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-Mar-06 16:53:54] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-Mar-06 16:53:54] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-06 16:53:54] RDP (0): Final rdp configuration used: {
activeUsername = " Contoso\\User01";
arcTimeout = 1800;
cacheId = 12BF328DD1C8B841;
certificatesUseRedirectName = 1;
configurationVersion = 8;
font = 1;
gatewayId = F2EE288CD1C8B841;
gatewayMode = 2;
gwAutodetectState = kConnectionGwAutodectedForceGW;
host = "MB-RDS-01.CONTOSO.LOCAL";
label = "Murbiten - Terminal Server";
loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.Contoso_-_Termi";
mouseMode = "-1";
port = 3389;
temporary = 1;
type = rdp;
useAlt = 0;
utilityBar = "-1";
webFeedVersion = "Windows 2008 R2 or newer";
connections = (
F4BF288CD1C8B841,
12BF328DD1C8B841
host = "remote.customer.com";
id = F2EE288CD1C8B841;
port = 443;
temporary = 1;
type = rdp;
kCFProxyTypeKey = kCFProxyTypeNone;
[2014-Mar-06 16:53:54] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-06 16:53:54] RDP (0): lo0 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-06 16:53:54] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-06 16:53:54] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-06 16:53:54] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): pdp_ip0 af=2 (AF_INET) addr=10.25.216.171 netmask=255.255.255.255
[2014-Mar-06 16:53:54] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): pdp_ip4 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): en1 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): ap1 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): en0 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): awdl0 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-06 16:53:54] RDP (0): Not using any proxy
[2014-Mar-06 16:53:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-06 16:53:54] RDP (0): Resolved 'remote.customer.com' to '194.71.11.69' using NameResolveMethod_Unknown(0)
[2014-Mar-06 16:53:54] RDP (0): Resolved 'remote.customer.com' to '194.71.11.69' using NameResolveMethod_Unknown(0)
[2014-Mar-06 16:53:54] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 346
User Message : Failed to parse authorization Challenge
[2014-Mar-06 16:53:54] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 346
User Message : Failed to parse authorization Challenge
[2014-Mar-06 16:53:54] RDP (0): Error message: Failed to parse authorization Challenge(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-Mar-06 16:53:54] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Mar-06 16:53:54] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-06 16:53:54] RDP (0): ------ END ACTIVE CONNECTION ------
en → en
authorization
Adam BokiniecHi Jeremy,
I found a solution, thanks for you effort. The solutions is the following.
First thing that needs to be done is either solution from options below, I did the Solution 1 in my case and added a NPS server to AD. (https://blogs.technet.com/b/networking/archive/2010/01/14/remote-desktop-gateway-client-fails-authentication-with-your-user-account-is-not-authorized-to-access-the-rd-gateway.aspx)
Solution 1
Register the NPS server in Active Directory:
In Server Manager, browse to the following location: Roles\Network Policy and Access Services\NPS (Local).
Right click on the NPS (Local) node and choose Register server in Active Directory.
Click OK to authorize the server when prompted.
Solution 2
Open Active Directory Users and Computers on any Domain Controller of the same domain as the Remote Desktop Gateway.
Add the Computer Name of the Remote Desktop Gateway to the RAS and IAS Servers group.
Situation B
Restart the RDS host and Gateway server.
Secondly and the most important is to configure an alternate address that match your public certificate. My public certificate CNAME is “remote.domain.se”.
All commands need to be run as administrator in PowerShell
To show you current configuration run the following commands:
CollectionName is the Collection Name you created for the RDS deployment.
To get your collection name type
Get-RDSessionCollection
When you got the collection name type
Get-RDSessionCollectionConfiguration -CollectionName "RDS - Terminal Server" | FL *
The default configuration will look like this:
CustomRdpProperty : use redirection server name:i:1
No to add you public domain name that match the certificate run the following command
Set-RDSessionCollectionConfiguration –CollectionName " RDS - Terminal Server " -CustomRdpProperty "use redirection server name:i:1 `n alternate full address:s:remote.domain.se
Run again to verify your settings
Get-RDSessionCollectionConfiguration -CollectionName "RDS - Terminal Server" | FL *
Now it show look something like this
CustomRdpProperty : use redirection server name:i:1
alternate full address:s:remote.domain.se
IPADs and iPhones can now connect to your environment.
Adam Bokiniec -
USB Pass-Through From Windows 8.1 Host To Windows Server 2012 R2 VM
I want to be able to connect with a Windows Mobile Device through Windows Mobile Device Center, within a Virtual Machine. When connecting through the Hyper-V Manager and through Remote Desktop, under "Other supported RemoteFX USB devices",
I can see the Symbol USB Sync Cradle. In the VM, in Device Manager, I don't see a USB connection. In the VM, I don't see any meaningful errors in the Event Viewer.
Host: Windows 8.1 Enterprise Hyper-V on a Domain. Upgraded from Windows 8.1 Pro. When this computer was originally installed with Windows 8 Pro, Hyper-V was enabled. I removed Hyper-V, and installed VMWare Player, because I wanted
USB Pass-through. I then uninstalled VMWare and installed VirtualBox. Recently, I uninstalled VirtualBox, upgraded to Windows 8.1 Enterprise, and enabled Hyper-V.
Virtual Machine OS: Windows Server 2012 R2 on a Workgroup. Started out with being a VMWare VM, using VMWare Player. Moved to VirtualBox. USB Pass-through was working in both those virtual environments. Used Disk2VHD to convert the
VM to a VHDX file.
On the Host:
Windows Mobile Device Center is connected to a Motorola Windows Mobile Device (MC959X) sitting in a Symbol USB Cradle. The OS on the scanner is Windows Embedded Handheld 6.5 Classic CE OS 5.2.29217 (Build 29217.5.3.12.26). Advanced Networking
(USB to PC) is not enabled.
Enabled RemoteFX.
In the RDP file, and in the Registry, added the GUID's for:
WPD "{eec5ad98-8080-425f-922a-dabf3de3f69a}";
Windows Mobile "{6AC27878-A6FA-4155-BA85-F98F491D4F33}";
USB Device "{88BAE032-5A81-49f0-BC3D-A4FF138216D6}";
Windows CE USB Device "{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}";
GUID_DEVINTERFACE_USB_DEVICE "{A5DCBF10-6530-11D2-901F-00C04FB951ED}"
Ran "sfc /scannow"
All Microsoft Updates are current.
What am I missing?I hope it's something like that. Those features have been installed. Here's what PowerShell shows is installed:
PS C:\Windows\system32> Get-WindowsFeature |Where {$_.Installed -eq "True"} | ft DisplayName, Installed
DisplayName
Installed
File and Storage Services
True
File and iSCSI Services
True
File Server
True
Storage Services
True
Remote Desktop Services
True
Remote Desktop Licensing
True
Remote Desktop Session Host
True
Web Server (IIS)
True
Web Server
True
Common HTTP Features
True
Default Document
True
Directory Browsing
True
HTTP Errors
True
Static Content
True
HTTP Redirection
True
Health and Diagnostics
True
HTTP Logging
True
Performance
True
Static Content Compression
True
Security
True
Request Filtering
True
Windows Authentication
True
Application Development
True
.NET Extensibility 3.5
True
.NET Extensibility 4.5
True
ASP.NET 3.5
True
ASP.NET 4.5
True
ISAPI Extensions
True
ISAPI Filters
True
Management Tools
True
IIS Management Console
True
.NET Framework 3.5 Features
True
.NET Framework 3.5 (includes .NET 2.0 and 3.0)
True
.NET Framework 4.5 Features
True
.NET Framework 4.5
True
ASP.NET 4.5
True
WCF Services
True
TCP Port Sharing
True
Ink and Handwriting Services
True
Media Foundation
True
Remote Server Administration Tools
True
Role Administration Tools
True
Remote Desktop Services Tools
True
Remote Desktop Licensing Diagnoser Tools
True
Remote Desktop Licensing Tools
True
SMB 1.0/CIFS File Sharing Support
True
User Interfaces and Infrastructure
True
Graphical Management Tools and Infrastructure
True
Desktop Experience
True
Server Graphical Shell
True
Windows PowerShell
True
Windows PowerShell 4.0
True
Windows PowerShell 2.0 Engine
True
Windows PowerShell ISE
True
WoW64 Support
True
Maybe you are looking for
-
How can I get my Officejet 4500 to print from my ipad
Can someone please help me. I can only get my Officejet 4500 to print while I am in the app eprint.
-
How do I include the discussion lines fron Disqus in a pdf created from a web page?
Space is reserved for the text material but the lines do not appear to have been included. here is the specific web page in question. Katy Perry Talks Taylor Swift Feud in 'Billboard' Super Bowl Issue | Katy Perry, Magazine, Taylor Swift : Just Jare
-
Account 410100 requires an assignment to a Co object
Hi Team, I am Trying to post one entry T code F-02 ( fast entry screen) , In the fast entry screen we require WBS element as Co object , we added WBS element but system still gives error message Account 410100 requires an assignment to a Co obje
-
JOptionPane showConfirmDialog problem
Hello everyone, I have written my own class that shows a customized confirm dialog (code is pasted below). I need to be able to tell whether the user clicks "YES", "NO" or "CANCEL". My main app has a panel with a JButton "Start System". When this but
-
I can't update iTunes library,
It say invalid address when it's almost done downloading