KMS license activation issues client systems within child domains

KMS Server Setup:
OS: W2K12 R2
KMS ver: 2012
Multiple child domains including a single domain in which the KMS server resides. All client systems and servers are scattered across the child domains throughout the enterprise.
The new KMS server, running OS 2012 R2 and KMS 2012, sits within a separate domain. All systems will eventually get migrated to this domain. I have two (2) KMS servers I plan on using to accommodate the pending activations. From reading I think you're allowed
to have a totla of six (6) KMS servers.
I've modified DNS to include placing the two servers within a security group and granting that group Full control permissions on the new _svc record.
As of right now I'm able to discover servers and client systems scattered across the enterprise. I've also confirmed the ability to update license status on a number of servers.
When attempting to update license credentials on client systems I get the following error:
Unable to connect to the WMI service on the remote machine.
I've come across a few systems that I've been able to update, most sitting within the same location. So I'm a little confused on how best to troubleshoot this issue.
In addition I have a few Macintosh systems running a virtual parallel of Win7 that are also getting this error when attempting to activate.
I've had other instances where when attempting to update license status the office products will get activated but not the OS.
This issue only occurs on client systems so I'm hoping to get some direction as I've ruled out firewall and blocked ports as the cause.
Any response appreciated.

remote WMI needs a few things to work;
a) networking/routing (can the destination machine be resolved by name? can you route to the destination machine?)
b) permissions (is the account you are using to connect to the target, permitted or denied?)(is there a trust?)
c) is WMI and DCOM on the target machine, healthy/configured correctly?
d) can you successfully connect/authenticate to the target machine, using tools such as msinfo32, compmgmt.msc, "WMIC /node:computername csproduct get name"
some useful tips:
http://technet.microsoft.com/en-us/library/hh672144(v=office.14).aspx
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-can-t-connect-to-remote-wmi.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

  • Win7/64 bit and Audition 3 license activation issue

    I saw some early discussions on other forums regarding this. Due to a mobo failure I had to rebuild my PC. Because it was an old mobo, I basically built from the ground up, now running a much faster system with the OS as noted above (Win7 Pro/64 bit sp1). I install Audition 3 (running compatibility mode to XP sp3) and activate it. Within about 3 days it pops up with a "license activation is no longer valid" error. Adobe has not been able to successfully solve the issue as after re-activating again, it will fail within a few days again.
    I did read some reports that anti-virus programs can interfere with a registry setting required for retaining activation. I do use AVG (albeit the free version), and after the latest re-install turned it off prior to re-installing Audition. I also recently downloaded a series of Win7 KB patches, some as I recall were to deal with compatibility issues. whether that will help we will see.
    I can't afford an upgrade at this time, and would like to see 3/3.0.1 remain activated.
    Thoughts? Fixes? Patches? Voodoo spells to apply?
    TIA

    @HCH_50
    I am not sure whether this will solve but you can try this
    1. repair Outlook from control pannel
    2. repair NOS from control pannel
    3. Repair Sync from NOS sync option
    4. Create new profile in Outlook
    5. Restart Pc and then try
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • SCCM 2012 root domain client management from child domain

    Hi All,
    We have SCCM 2012 environment in Child domain and we would like to manage the root domain clients as well. we are using https mode. What all configuration do we need to make for root domain clients to monitor successfully from child domain.  
    Is it mandatory to create System Management container for the Root domain? if yes what all permission i need to give for that System Management container. 
    Do we need to enable Active directory forest discovery?
    Regards,
    Bhaskar K

    No, you do not need to create the System Management container or publish info into it and no you do not need to enable forest discovery.
    ConfigMgr ultimately does not care about AD. AD can be used by clients to help them locate services and configure themselves, but this can also be accomplished in other ways in ConfigMgr.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Cross-client activation issue with LBWE

    Hi,
    I am running into the same problem as the following links:
    Problem with setup table fillup
    Cross-client problem
    We have the configuration client 300 and the loading client 310. The structures in client 100 are active but are inactive in client 310. The first link says that I have to go into LBWE in the loading client to activate the structures, but I have the same issue relating to the second link. This is happening in the DEV system.
    Is the fix for the second issue relating to Basis who would allow me to do the activation on the loading client - opening the system for me to activate? Or is it the Developer's issue to find the workaround?
    I don't see why the restriction on the configuration for DEV client systems. This is for BW related Configuration issues and nothing is relating to SAP Business Configuration that had to be so restricted.
    Please advise how to get the inactive structures to be active in the loading client.
    Thanks

    Hi,
    It is a very common issue.  You can solve it by logging in to 310 client, going to SCC1 transaction and replicating changes from the transport orders that you created in the other DEV client.
    It's like transporting from one DEV client to the other, but please note that the request does not need to be released.
    I hope this helps.
    Best regards,
    Maximiliano Ariel López

  • Having trouble installing ProIX on new Windows 8 machine after XP crash.  Get almost ll of the way through and get an error box ... contact system support.  Only way out is to abort and then it un-installs.  Wondering if a licensing max issue since we did

    having trouble installing ProIX on new Windows 8 machine after XP crash.  Get almost ll of the way through and get an error box ... contact system support.  Only way out is to abort and then it un-installs.  Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?

    Hey robr72339266,
    With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
    But, you cannot use Acrobat on both the machines simultaneously.
    You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
    Please Contact | Adobe to seek help on the same.
    Regards,
    Anubha

  • Activation issue for ViewLink child destination view obj is not activated

    We have a ViewLink in the Application Module.
    i) AddressType - Parent ViewObject
    ii)Address Detail - Child ViewObject
    iii) There are other View Objects as well in the Application Module
    When user selects the Address type the detail Address needs to be displayed.
    The Parent View Object (Source View Object) is part of the AM data model. During activation other view objects are getting activated without any issues. However the Child View Object or Destination View Object which is a part of the ParentViewObject is causing the following issues during Activation:
    While submitting UI page, there is server side validation (in the App Module Impl class) and during validation (at RuntTime), the Application Module Impl class is trying to get a currentRow
    (getCurrentRow()) from Child (Destination) View Object however it is throwing a NullPointerException
    The code which trhows Exception is ---> Row currentRow = addrDetailViewObj.getCurrentRow(); //Please note addrDetailViewObj is NOT Null howeve the currentRow is coming as NULL
    java.lang.NullPointerException
         at oracle.jbo.server.ViewRowSetIteratorImpl.activateIteratorState(ViewRowSetIteratorImpl.java:3910)
    In order to reproduce the above scenario I have kept the AM pooling OFF. With AM pooling ON i am unable to reproduce any of the above issues.
    Please let me know if any extra property settings or coding required in order to activate the Child (Destination) view object.
    Edited by: user5396188 on Feb 27, 2012 10:02 PM
    Edited by: user5396188 on Feb 27, 2012 10:06 PM

    When you work with am pooling off, the state of the am should be written into the db (ps_txn). However, there are some states (like the current row) which is not written into the db (in some versions of jdev). So when the am gets activated there is no current row and you get a NPE in your code (addrDetailViewObj.getCurrentRow();).
    The only workaround I know is to store the key of the current row when you get passivated and when you get activated set it again.
    Check http://tompeez.wordpress.com/2011/07/08/jdev-always-test-your-app-with-applicationmodule-pooling-turned-off/ for more info.
    Timo

  • SAP License issue after system refresh.

    Hi,
    After system refresh, refreshed system has License info of source system. When trying to apply license from unix, it gives below error, saying system number is incorrect to apply new license. Looks the system number of source system is causing issue. I checked, there is no data in MLICHECK table. I could see some info in "saplikey" table. System is 700 system.
    sidadm> saplikey -install "/home/SID/sid_multiple.txt pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS01_sapsidci
    This system's system number is "000000000710287641", but there is a license key
    for system number "000000000711311441" in file "/home/SID/sid_multiple.txt".
    sidadm>
    Thanks.

    First check whether you have deleted all invalid licenses?
    use below command to delete invalid licenses
    sidadm>saplicense -delete
    And apply new license based on new hardwarekey with below command
    sidadm>saplicense -install
    *I think there should be some invalid licenses lying in your system
    Regards
    Nick Loy

  • Client System health certificate name issue

    Hi,
    System health certificate is generated using HRA server name for clients system.
    There is no event log error for this. Can anyone suggest what can be the issue here.
    Thanks,
    Sridhar
    Sridhar

    Hi,
    Could you offer more information about your environment? Such as your HRA configuration screenshot, now we assume you are using the intranet enterprise CA, because the HRA
    will only request health certificates from the CA configured first in the order, unless that server is unavailable or has been identified as unresponsive, therefore maybe you have configure the incorrect CA order.
    You can use the following procedure to modify the priority of CAs used by HRA, or to remove CAs from the HRA configuration. HRA will only request certificates from the first
    CA configured in the list, unless that CA has been marked as unavailable.
    To configure the order or to delete certification authorities using the Windows interface
    1.Open the HRA console.
    2.In the console tree, click Certification Authorities .
    3.Right-click a CA name in the list of servers. Click Move Up to increase preference for this server in the order. Alternatively, click Move Down to decrease preference for
    this server in the order.
    4.To delete a CA from the list, right-click the CA name, and then click Delete .
    The related KB:
    Configure NAP Certification Authority
    http://msdn.microsoft.com/en-us/library/cc731916.aspx
    More information:
    The Cable Guy: DirectAccess with Network Access Protection (NAP)
    http://technet.microsoft.com/en-us/magazine/ff758668.aspx
    NPS Best Practices
    http://technet.microsoft.com/en-us/library/cc755120(v=ws.10).aspx
    Certificates and NPS
    http://technet.microsoft.com/en-us/library/cc772401(v=ws.10).aspx
    Overview of HRA
    http://msdn.microsoft.com/en-us/library/cc731872.aspx
    Resources for using certificates with NPS and NAP
    http://blogs.technet.com/b/nap/archive/2008/12/19/resources-for-using-certificates-with-nps-and-nap.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows 7 - Continuous redeployment time/activation issues

    Hello,
    I have about 9 classrooms that have from 10 to 25 computers in each along with 30 laptops for offsite use in which the software installed on them changes almost daily depending on what class is being taught. Currently we have been using Comodo Time Machine
    on the laptops and previously on the desktops although we are using windows deployment server on the desktops now. My issue is that every time we reimage the systems we are running into activation issues. This system was put into place before I got here and
    am trying to find the right direction to head into. It looks like the current windows deployment images sysprepped so that is why they are coming overdue right out of the gate. We do have licensing through the Microsoft Partner Network although im awaiting
    access. Staying in the trial zone of the install is what they have been trying to do although the image was not properly configured and is out of date once its put on the system and the black screen comes up. Comodo is quick but lacks the ability to stay current
    and only allows for a set amount of images due to space and can lack uniformity. A fast re-image speed would be beneficial but the speed of the deployment server has been working since I start it the day before for the next class. To me it seems like I should
    fix the image on the deployment server and see where that takes me. Does anyone have any experience of this type of setup or know any other options? 

    Hi,
    Based on my understanding, you want to auto activate the Windows during the deployment, right?
    If yes, What's the type of your license?
    If you have KMS server, you don't need do any thing.
    If you have MAK license, you cannot set input the key in answer file to activate.
    In addition, what the deployment tool did you use?
    Karen Hu
    TechNet Community Support

  • Windows 7 KMS Licensing Service on S12

    The Windows 7 KMS Licensing Service can not work on my lenovo S12(via nano).  It shows an error code as followed:
    0xC004F035
    Description:
    The Software Licensing Service reported that the computer could not be
    activated with a Volume license product key. Volume-licensed systems require
    upgrading from a qualifying operating system. Please contact your system
    administrator or use a different type of key.
    However, the computer is shipped without operating system.  After web browsing, I fuond the problem may lie in the BIOS .  There is a label [SLIC] shows in the ACPI table name list.  An improper version of Windows System may be wrote into the BIOS.  It seems like I need a newer version of BIOS firnware to clear out the SLIC to pass the KMS Licensing Service.  I called lenovo's local technical support, but it appears that they did not realize this problem.  Is there any newer version of BIOS firnware to solve this problem? 

    Hello MKBF and welcome.
    The problem is not the BIOS, but a Microsoft license issue.
    http://support.microsoft.com/kb/938450
    about half way down the page:
    Cause
    This issue may occur because volume editions are licensed for upgrade only. Installation of a volume operating system on a computer that does not have a qualifying operating system installed is not supported.
    Workaround
    To work around this issue, install a qualifying version of a Microsoft operating system, and then reinstall the volume operating system.
    A Windows XP installation should do ... or maybe just the /i386 folder from XP on the hard drive? - Or you need to buy a more expensive Windows 7 key.
    Hans

  • Office 2013 Volume License Activation question

    Hello,
    we have software assurance, so MAK and KMS are available for O2013.
    I cannot use KMS server (there are reasons for now). So I have to use MAK. I know that it is possible later on to convert MAK to KMS.
    I found topic about ADBA. But missing few points from the description after my 2 questions.
    1. Can I use KMS key for use with Volume Activation Tool without actually having KMS installed?
    2.  at the end it says just 180 days activation. What will happen then?
    From:
    http://searchenterprisedesktop.techtarget.com/tip/Using-Active-Directory-activation-and-other-new-Office-2013-tools
    -------Prior to Office 2013, IT had to rely on Multiple Activation Key (MAK) or Key Management Service (KMS) activation. These processes were generally more complex than ADBA. Little has changed with either MAK or KMS in Office 2013. With ADBA, however,
    IT can easily
    activate Office 2013 clients through their connections to the domain.
    To implement ADBA, administrators must use the Volume Activation Tools utility, which walks them through the setup process. After admins supply the KMS host key, the setup process adds an activation object to the
    Active Directory Domain Services. The activation object uses the same Generic Volume Licenses Key (GVLK) and KMS host pair as that for regular KMS activation. When the client joins the domain, the activation object automatically activates the Office installation,
    granting a license to the client for 180 days. --------------
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

    Hello,
    we have software assurance, so MAK and KMS are available for O2013.
    I cannot use KMS server (there are reasons for now). So I have to use MAK. I know that it is possible later on to convert MAK to KMS.
    I found topic about ADBA. But missing few points from the description after my 2 questions.
    1. Can I use KMS key for use with Volume Activation Tool without actually having KMS installed?
    2.  at the end it says just 180 days activation. What will happen then?
    From:
    http://searchenterprisedesktop.techtarget.com/tip/Using-Active-Directory-activation-and-other-new-Office-2013-tools
    -------Prior to Office 2013, IT had to rely on Multiple Activation Key (MAK) or Key Management Service (KMS) activation. These processes were generally more complex than ADBA. Little has changed with either MAK or KMS in Office 2013. With ADBA, however,
    IT can easily
    activate Office 2013 clients through their connections to the domain.
    To implement ADBA, administrators must use the Volume Activation Tools utility, which walks them through the setup process. After admins supply the KMS host key, the setup process adds an activation object to the
    Active Directory Domain Services. The activation object uses the same Generic Volume Licenses Key (GVLK) and KMS host pair as that for regular KMS activation. When the client joins the domain, the activation object automatically activates the Office installation,
    granting a license to the client for 180 days. --------------
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis
    Q1) there is a KMShost product key, and there is a KMSclient product key.
    The KMShost product key, you install this in your KMShost machine, and the client machines which have the KMSclient product key will contact your KMShost machine for activation.
    Volume Licensed products are provided by MSFT with the KMSclient product key already installed. The KMSclient product keys are also publically available in the TechNet library documentation.
    VAMT can be used, with or without KMS installed. VAMT is not part of KMS, and, KMS is not part of VAMT.
    ADBA is not part of VAMT and VAMT is not part of ADBA.
    ADBA can only be used if your AD is at the later version, and, ADBA only works for the latest products like Windows8 and Office2013.
    If you have older AD or older products you will still need to have KMS or MAK.
    Q2) after 180days, it's the same as KMS - the KMSclient (or ADBA client) will enter "non-genuine" mode if the client has not contacted ADBA object (or KMShost) to renew the activation status.
    This wiki article I put together, includes a few helpful links about ADBA and KMS:
    http://social.technet.microsoft.com/wiki/contents/articles/22510.volume-activation-kms-mak-adba-avma.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • WebRequest.Create Hangs in Client system with Windows 8.1 with Fmrk 4.5

    Hi,
    We are hosting a Windows Form in IE builded with .Net Target Framework 3.5 and running in ASP.Net website's run time .Net Framework 2.0.
    Till now, this is working in Windows 7 and IE11 combination. When we planned to migrate to Windows 8 and IE11 combination, some functionalities in the Windows form hosted in IE fails, its keep on hanging.
    When we debugged the code, we found that hanging happens at
    1. To insert a image 
    WebRequest request = WebRequest.Create(url);
    2. While doing webservice call
    CSpellCheckerWS objCUserDictionaryWordsWS = new CSpellCheckerWS();
    Please find below our Trails for workaround:
    1. We have try catch block on top of above lines, but it never comes to catch or proceed (checked for more than 30 minutes), its keep on running that makes IE to hang. End user have to kill the IE to proceed with our web application.
    2. We have timeout option for WebRequest object, but we are having problem in the constructor itself, so unable to make use of timeout option.
    3. We planned to use HttpClient object, but for this we need to build our Windows Form with Target Framework .Net 4.5. But .Net framework 4.5 will no longer support to host the Windows Form in IE.
    4. We observed that, for our Windows Form project dll, say abcd.dll, we have ref link to abcd.config.xml
    in the ASP.Net hosted web page. If we remove the *.config.xml, then we do not have this hanging issue. So, our problem solves here. But we faced another problem. Now we are getting
    404 errors for all the dependent child dll for our main dll, abcd.dll. Even though we have child dlls in the same folder of abcd.dll, it is checking in website root folder, bin folder , .exe, .dll and finally after 8 iterations, it is picking
    the correct dll. So for multiple child dlls we are getting 9 * no. of child dlls = 404 errors. So, we are unable to proceed further.
    200 http://localhost/BrowserWebSite.CSharp/Default.aspx
    200 http://localhost/BrowserWebSite.CSharp/BrowserBin/BrowserApplication.dll
    200 http://localhost/BrowserWebSite.CSharp/BrowserApplication.config.xml
    200 http://localhost/BrowserWebSite.CSharp/BrowserBin/BrowserApplication.dll
    404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication.DLL
    404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication/BrowserChildApplication.DLL
    404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication.DLL
    404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication/BrowserChildApplication.DLL
    404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication.EXE
    404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication/BrowserChildApplication.EXE
    404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication.EXE
    404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication/BrowserChildApplication.EXE
    200 http://localhost/BrowserWebSite.CSharp/BrowserBin/BrowserChildApplication.DLL
    So, please guide us how to proceed further. What is the relation between the *.config.xml and WebRequest.Create constructor and 404 errors.
    We have simple test application to replicate the issue. If needed, I can share the application.
    System Requirements to replicate : Windows 8.1, IE 11 and (Client system having .Net 4.5) and Windows / Web projects builded with .Net 3.5/2.0 respectively.
    Note : We have run caspol settings and set EnableIEHosting to 1 (DWord).

    Hello,
    >>When we planned to migrate to Windows 8 and IE11 combination, some functionalities in the Windows form hosted in IE fails, its keep on hanging.
    What .NET Framework version are you using after you migrate your client to windows 8 and IE11? If it is 4.0 or 4.5, I am afraid this is by designed because hosting controls in IE is now blocked by default (as of v4 or v4.5). See MSDN article under
    'Web Applications'.
    You could still enable it by modifying its provided registry key.
    By the way, since this issue is related with IE and web application, I suggest that you could post such kind of issues to related forum, as
    IE forum and Web forum.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Windows Server Activation Issue

    Hi all,
    Can any one please help me in resolving an issue with Windows Server 2012 License Activation using KMS. While executing the command slmgr /dlv or any other parameter I am receiving an Error 0xC0000022. After checking the event log I saw the Software Protection
    Service is getting Failed with an Error 0x80070005.  I also tried running SFC Scan (sfc /scannow) and also found the error "Windows Resource Protection Corrupt File but was unable to Fix the same". There are some critical Services and Application
    running on the Server.
    Can anyone please suggest me some solution for this issue.Below in the Output for the CBS log.
    Output
    Windows Resource Protection found corrupt files but was unable to fix some of them
    Refer CBS Log
    CSI   
    00000718 [SR] Cannot repair member file [l:76{38}]"WindowsServerUpdateServices.Events.xml" of UpdateServices-EventFilter, Version = 6.2.9200.16384, pA = PROCESSOR_ARCHITECTURE_AMD64
    (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    CSI   
    00000711 [SR] Cannot repair member file [l:72{36}]"WindowsDeploymentServices.Events.xml" of Microsoft-Windows-Deployment-Services-Event-View, Version = 6.2.9200.16384, pA
    = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    CSI   
    0000070a [SR] Cannot repair member file [l:48{24}]"RemoteDesktop.Events.xml" of Microsoft.Windows.ServerManager.RDSPlugin, Version = 6.2.9200.16384, pA = PROCESSOR_ARCHITECTURE_MSIL
    (8), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    CSI   
    00000704 [SR] Cannot repair member file [l:40{20}]"WebServer.Events.xml" of Microsoft-Windows-IIS-WebServer-Events, Version = 6.2.9200.16384, pA = PROCESSOR_ARCHITECTURE_AMD64
    (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    QM: Failed to start upload with file pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT = 0x80004005 - E_FAIL]
    SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL]
    SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6
    SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL]
    Thanks Siva Aadhi-CIT. MCITP

    Hi,
    Thanks for your reply and i have followed the methods which you have proposed still there is no luck and now i am able to find the corrupt files from the logs, and the corrupted files are "C:\Program Data\Microsoft\Event Viewer\Views\Server Roles"
    RemoteDesktop.events.xml,webserver.events.xml,
    Windowsdeploymentservices.events.XML, windowsserverupdateservices.events.xml
    i tried to run dism commad with restore health and it is asking me to specify source files even i have given source switch.
    can you guide me how to ran dism command with correct switches to do a repair or can i replace the corrupted files with from some other server.
    Thanks,
    Thanks Siva Aadhi-CIT. MCITP

  • Client System login takes more time

    Hi Experts,
    I try to login to client system it always takes more time to connect with server, after login there is no problem. .. i also try Firewall disable, License configure settings, and also disable extra network port, but still facing problem. please help on this......................

    Hi Ashok,
    Thanks for your valuable reply.
    Still issue is not Resolved while i followed your steps. my user is accessing the  system from USA and my server kept in India and the system taking 5-6 Min for Login in SAP. that's the reason the my client forcing to fix the issue.
    After checking the some forum i had found the OSS Note :1135705, is it resolve my issue?
    If you have any information regarding OSS Note regarding this  issue please send me.
    Your Reply will help for me. Thanks in Advance.
    With Regards,
    BJO
    Edited by: Baya Jo on Feb 22, 2012 1:41 PM

  • KMS licensing and performance impacts of Office 2010 OSPPSVC in a Remote Desktop Services Environment?

    I have been directed from the Office Install/Upgrade/Activate forum to ask my question in this forum:
    We have Office 2010 deployed in our 2008R2 RDS environment across 100's of servers.  We have multiple (failover) KMS servers, and there have been no issues with Office licensing.   We have noticed that Event ID: 1003  "The
    Software Protection service has completed licensing status check" comes up repeatedly in the APP logs on the RDS servers, presumably after the end user launches an Office application.   I understand this to be considered normal,
    from what I have read and researched so far. 
    However, we are attempting to understand how this activity affects performance in an RDS environment, where multiple users may be launching Office applications at any given time on the server.   I have seen posts where suggestions were
    made to try and stop the OSPP service when inactive, but that would most likely never happen on an active RDS server with users launching Outlook and other office apps throughout the day. 
    Can someone give any insight as to the need to mitigate any of this activity involved with Office KMS "licensing status checking" specifically in an RDS environment?   If we're missing any performance gains by dialing this
    service back, then I would like to address it.   If this behavior is by design, and in most cases benign (non-performance-impacting) then I would like to know that also.

    Haven't heard from anyone on this.    ??

Maybe you are looking for