KMS / xorg 1.8 on intel 830m / 82830M

Hi,
i run the old intel xf86-video-intel 2.9 on my beloved Vaio R600 HFP with a intel 830m / 82830M graphics chipset.
KMS is switched off by i915.modeset=0.
Now with the kernel 2.6.34 and KMS switched on, i get a console, but when X is started i get a dark screen without a mouse.
Anyone got this graphic chip running with xorg 1.8?
Thanks.
redada

When you upgraded the kernel and video card driver, did you upgrade xorg at the same time?  If so, then maybe it's an xorg issue and not an issue with your particular video card.
Note there have been some changes with xorg 1.8.  Namely, configuration files using hal are now ignored.  udev is used instead.  See http://www.archlinux.org/news/502/ for info.

Similar Messages

  • Massive artifacts, redraw and performance problems: xorg 1.8 and Intel

    Hi there.
    Since the update to xorg-server 1.8 my intel GMA950 powered lap top is seriously acting up.
    *Performance has dropped significantly, Games or compiz run slower than before
    *Font drawing is sometimes garbled, sometimes not
    *Some windows or parts of windows (sometimes only the decorations) show artifacts
    *Drawing of fonts while typing is delayed by 1 or more characters sometimes
    It might be related to this bug or the problem described in this thread.
    Just look at this screenshot:
    I tired moving xorg.conf, I tried running compiz with --indirect-rendering, I tried all kinds of options in xorg.conf and all but it just remains broken like this. Has anyone got similar problems and a solution?
    Last edited by Shapeshifter (2010-06-28 15:07:21)

    I've been having the same issue but not to the extent of the OP.
    I read the man for intel
    man intel
    and added these three lines to my xorg.conf
    Option "XvPreferOverlay" "false"
    Option "SwapbuffersWait" "false"
    Option "Tiling" "false" #{edit: after doing some testing I found tiling made no differnece so I ended up commenting it out}
    The first option I added because the man says
    The  overlay
                  behaves  incorrectly  in  the  presence of compositing, but some
                  prefer it due to it syncing to vblank in  the  absence  of  com‐
                  positing
    I use compiz ergo i have compositing and I noticed my video tearing and skipping sometimes. Seems to work fine now (more testing will be required)
    The second option I added because the man says
    Note that when enabled, this option can
    adversely affect the framerate of applications that render
    frames at less than refresh rate.
    I have a hunch compiz probably isn't rendering at the refresh rate and also video would be rendered at less than my vert refresh of 60. So I disabled it.
    The third and last option I added was because the man says
    In most cases (especially for complex rendering),
    tiling dramatically improves performance.
    Well this may be a case where it doesn't and the posters above have noticed improvements.  {edit: after doing some testing I found this made no differnece so I ended up commenting it out}
    In the end moving windows around the screen do not tear anymore and my video is smoother. I enabled all three at once so it maybe that one or a combination of 2 or possibly all 3 resulted in change. I suspect  I will do some more testing but hopefully this is a place to start fro some of you having this issue.
    Last edited by George.Harmony (2010-07-11 21:21:17)

  • Performance decrease with xorg 1.6 and intel

    i have a box with
    gigabyte ga-8ig1000mk mainboard
    intel 865G graphics
    celeron 2.6 cpu
    512 M ram
    arch linux
    x does not start with xorg 1.5/intel or xorg 1.6/intel (video memory related error message)
    kde 4 performance with xorg 1.6/intel-legacy is noticably lower than with xorg 1.4/intel
    glxgears in its default window size gives 460 fps with xorg 1.4/intel and 300 fps with xorg 1.6/intel-legacy
    currently the only way to have xorg 1.4 is
    IgnorePkg = xf86-video-intel
    IgnorePkg = intel-dri
    IgnorePkg = glproto
    IgnorePkg = xcb-proto
    IgnorePkg = libxcb
    IgnorePkg = libx11
    IgnorePkg = dri2proto
    IgnorePkg = libdrm
    IgnorePkg = mesa
    IgnorePkg = libgl
    IgnorePkg = libxdamage
    IgnorePkg = damageproto
    IgnorePkg = xcb-util
    IgnorePkg = gtk2
    IgnorePkg = pango
    IgnorePkg = libthai
    IgnorePkg = libxinerama
    IgnorePkg = libxcursor
    IgnorePkg = libxklavier
    IgnorePkg = xkeyboard-config
    IgnorePkg = libxi
    IgnorePkg = libxext
    IgnorePkg = libx11
    IgnorePkg = libxcb
    IgnorePkg = xcb-proto
    IgnorePkg = xextproto
    IgnorePkg = inputproto
    IgnorePkg = cairo
    IgnorePkg = libpng
    IgnorePkg = pixman
    IgnorePkg = xf86-input-keyboard
    IgnorePkg = xf86-input-mouse
    IgnorePkg = xf86-video-vesa
    IgnorePkg = libfontenc
    IgnorePkg = freetype2
    IgnorePkg = fontsproto
    IgnorePkg = libxfont
    IgnorePkg = xproto
    IgnorePkg = xorg-font-utils
    IgnorePkg = xorg-fonts-encodings
    IgnorePkg = xorg-fonts-alias
    IgnorePkg = expat
    IgnorePkg = fontconfig
    IgnorePkg = xorg-fonts-100dpi
    IgnorePkg = xorg-fonts-75dpi
    IgnorePkg = libxau
    IgnorePkg = libxdmcp
    IgnorePkg = xcb-proto
    IgnorePkg = libxcb
    IgnorePkg = kbproto
    IgnorePkg = inputproto
    IgnorePkg = bigreqsproto
    IgnorePkg = libx11
    IgnorePkg = xextproto
    IgnorePkg = libxext
    IgnorePkg = libice
    IgnorePkg = libsm
    IgnorePkg = libxt
    IgnorePkg = libxmu
    IgnorePkg = libxpm
    IgnorePkg = printproto
    IgnorePkg = libxp
    IgnorePkg = libxaw
    IgnorePkg = xorg-res-utils
    IgnorePkg = libxkbfile
    IgnorePkg = libxkbui
    IgnorePkg = xf86miscproto
    IgnorePkg = libxxf86misc
    IgnorePkg = xf86vidmodeproto
    IgnorePkg = libxxf86vm
    IgnorePkg = xcursor-themes
    IgnorePkg = xorg-xkb-utils
    IgnorePkg = xkeyboard-config
    IgnorePkg = fontcacheproto
    IgnorePkg = libxfontcache
    IgnorePkg = libxi
    IgnorePkg = liblbxutil
    IgnorePkg = renderproto
    IgnorePkg = libxrender
    IgnorePkg = randrproto
    IgnorePkg = libxrandr
    IgnorePkg = trapproto
    IgnorePkg = libxtrap
    IgnorePkg = mcpp
    IgnorePkg = xtrans
    IgnorePkg = xorg-server-utils
    IgnorePkg = xf86dgaproto
    IgnorePkg = libxxf86dga
    IgnorePkg = recordproto
    IgnorePkg = libxtst
    IgnorePkg = xineramaproto
    IgnorePkg = libxinerama
    IgnorePkg = videoproto
    IgnorePkg = libxv
    IgnorePkg = dmxproto
    IgnorePkg = libdmx
    IgnorePkg = libxft
    IgnorePkg = xorg-utils
    IgnorePkg = libdrm
    IgnorePkg = xorg-fonts-misc
    IgnorePkg = pixman
    IgnorePkg = xbitmaps
    IgnorePkg = xorg-server
    IgnorePkg = xorg-twm
    IgnorePkg = xorg-xauth
    IgnorePkg = xorg-xinit
    IgnorePkg = fixesproto
    IgnorePkg = libxfixes
    IgnorePkg = libxcursor
    IgnorePkg = libpng
    IgnorePkg = xorg-apps
    IgnorePkg = xterm
    i want a better solution
    Last edited by ash (2009-04-19 22:48:49)

    you do not need nearly as many packages on hold. Haven't logged into my 32-bit arch install for a month now, but I've maintained a xorg 1.4 install with this line just fine:
    IgnorePkg = xf86-video-intel xf86-input-evdev xorg-server xorg-apps xorg-xkb-utils xorg-server-utils xorg-utils intel-dri synaptics libgl libdrm xorg-res-utils xf86driproto xf86-input-keyboard xkeyboard-config
    That said, I expext to upgrade next time I use it (probably to play around with some fast boot). I would look into troubleshooting with the latest xorg and intel driver as it really should work, if I were you. I presume you have already tried starting x without a xorg.conf as a baseline test with those versions?

  • [SOLVED] Xorg 1.6 with intel graphic corruption

    Hi Arch community
    frequently the part of graphic corruption in any application, see screenshot:
    this fix (depend) when refresh section, or move mouse over this.
    I have:
    Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller
    xorg 1.6 with xf86-video-intel-legacy
    my xorg.conf:
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "All"
    BoardName "All"
    Option "DRI" "True"
    Option "NoDDC" "True"
    Option "XAANoOffscreenPixmaps" "True"
    Option "XaaNoPixmapCache"
    Option "EnablePageFlip" "True"
    Option "RenderAccel" "True"
    #Option "AccelMethod" "xaa"
    Option "Tiling" "false"
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    Option "MIT-SHM" "Yes"
    EndSection
    please help, this problem is annoying
    thanks {
    Last edited by epsilom (2009-04-24 00:41:36)

    andywxy wrote:
    @epsilom
    could you share your xorg.conf? I have the same problem with the compiz fusion as my WM, however, I didn't use xorg.conf.
    Thank you!
    first generate xorg.conf (see http://wiki.archlinux.org/index.php/Xorg ) and modify/add:
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "All"
    BoardName "All"
    Option "DRI" "True"
    Option "RenderAccel" "True"
    Option "ExaOptimizeMigration" "off"
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    I don't make public all my xorg.conf because is for my particular hadware 
    Last edited by epsilom (2009-04-24 14:34:29)

  • [SOLVED] Xorg won't start - Intel Sandy Bridge graphics

    Did a fresh install of Arch on my laptop last night, looking to use the window manager i3 which I have installed but when i run "exec i3" it logs me out, indicating some sort of failure in the session. Tried "startx" and noticed that didn't work either.
    "grep EE /var/log/Xorg.0.log" shows me the following errors in the log:
    (EE) Failed to load module "vesa" (module does not exist, 0)
    (EE) Failed to load module "modesetting" (module does not exist, 0)
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    Extensively read the Intel and Xorg pages on the wiki and googled for an hour or two, tried to create some custom configurations for Xorg but nothing has worked so far.
    It appears to be some issue with the driver in combination with Xorg. I've tried updating, then uninstalling and reinstalling the packages (the three Xorg packages + Intel driver) and specifying what driver and acceleration mode Xorg should use (intel and sna). No luck so far.
    Anyone here who is having the same problem or know the solution?
    Last edited by olger (2013-02-24 19:45:22)

    Gusar wrote:Not really, because if nothing is configured (and the defaults of xterm and twm aren't installed), X will simply quit, and people will ask what's wrong even though things are fine.
    Well maybe I am asking the wrong question then, because I think that might be exactly whats happening. I think maybe my problem is simply related to the window manager, i3.
    Here's a link to my log anyways, if anyone wants to take a look and help me exclude Xorg from the list of potential causes:
    https://gist.github.com/anonymous/f85c2a1f2a0319198a09
    My original problem was that running "exec i3" gives me a blank screen followed by the login screen. I remember running "startx" at another installation I was troubleshooting and getting the very basic Xorg interface, but I dont have xterm or twm installed right now so thats probably why it's just shutting down when I run "startx".

  • Xorg hard Freezes using Intel Video Driver

    I have an Intel GMA 945 graphic card and randomly my system freeze. I can't do alt+pet+reisub. I have to reset manually. When I play mupenplus and i load conker rom always crashes. I have these errors on dmesg.
    X:6797 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
    reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
    X:7010 freeing invalid memtype d0000000-e0000000
    X:6797 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
    reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
    X:7026 freeing invalid memtype d0000000-e0000000

    Yes I did. I almost hate to say it but after over 6 months of having this problem and finally getting fully sick of it and trying everything I could think of to fix it, I decided to install Ubuntu to see what would happen. What did happen was the screen flickering and freezing utterly completely disappeared. I haven't had one problem since. I love Arch and use it on two other boxes but my frustration got the better of me with my laptop. Clearly there is still a problem with one or more of the Arch packages related to the intel video driver judging by the amount of people that have had issues with it. Maybe Ubuntu patched their driver, I'm not sure, but it works flawlessly. Luckily, I use Nvidia drivers from their site using a custom kernel on my other boxes so I haven't had any problems there. I was a bit disappointed by the outcome, but at least I can use my laptop now

  • [SOLVED] Xorg crash - KolourPaint - intel

    Hello.
    I have a ASUS 1001HA netbook. I'm running the latest xorg-server xf86-video-intel and KDE from the stable Archlinux repos.
    Xorg crash when I do:
    1) open KolourPaint, and select the pen tool.
    2) start drawing your name quickly(or some doodle) by pressing the left button of your mouse(or your touchpad) without releasing it.
    3) Xorg crashes.
    Xorg.0.log.old:
    X.Org X Server 1.7.6
    Release Date: 2010-03-17
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.33-ARCH i686
    Current Operating System: Linux arch 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686
    Kernel command line: root=/dev/disk/by-uuid/ea0af8f4-8676-431b-ac66-5a4c7e989ca8 resume=/dev/sda6 ro acpi_osi="!Windows 2009" acpi_backlight=vendor eeepc_laptop.hotplug_disabled=1 logo.nologo quiet console=tty1 splash=silent,theme:arch-black elevator=deadline
    Build Date: 01 April 2010 05:35:33PM
    Current version of pixman: 0.18.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 15 21:52:30 2010
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "SynapticsTouchpad"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AutoAddDevices.
    (II) Loader magic: 0x81e4c60
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (++) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:27ae:1043:8340 Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xf7e00000/524288, 0xd0000000/268435456, 0xf7dc0000/262144, I/O @ 0x0000dc00/8
    (--) PCI: (0:0:2:1) 8086:27a6:1043:8340 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xf7e80000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.7.4.901, module version = 2.10.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.3, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.3, module version = 1.2.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (II) LoadModule: "intel"
    (II) Reloading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) UnloadModule: "intel"
    (II) Failed to load module "intel" (already loaded, 136046834)
    (II) LoadModule: "synaptics"
    (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    (II) Primary Device is: PCI 00@00:02:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
    (--) intel(0): Chipset: "945GME"
    (==) intel(0): video overlay key set to 0x101fe
    (II) intel(0): Output VGA1 using monitor section Monitor0
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): found backlight control interface /sys/class/backlight/eeepc
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1024x600
    (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): [DRI2] Setup complete
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (II) put_image
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): No memory allocations
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (==) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: DRI2 Enabled
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 158
    (II) Synaptics touchpad driver version 1.2.1
    (--) SynapticsTouchpad auto-dev sets device to /dev/input/event9
    (**) Option "Device" "/dev/input/event9"
    (II) SynapticsTouchpad: x-axis range 1472 - 5472
    (II) SynapticsTouchpad: y-axis range 1408 - 4448
    (II) SynapticsTouchpad: pressure range 0 - 255
    (II) SynapticsTouchpad: finger width range 0 - 0
    (II) SynapticsTouchpad: buttons: left right
    (**) Option "SHMConfig" "false"
    (**) Option "LeftEdge" "1752"
    (**) Option "RightEdge" "5192"
    (**) Option "TopEdge" "1620"
    (**) Option "BottomEdge" "4236"
    (**) Option "FingerLow" "25"
    (**) Option "FingerHigh" "30"
    (**) Option "FingerPress" "256"
    (**) Option "MaxTapTime" "180"
    (**) Option "MaxTapMove" "221"
    (**) Option "ClickTime" "80"
    (**) Option "FastTaps" "false"
    (**) Option "EmulateMidButtonTime" "75"
    (**) Option "EmulateTwoFingerMinZ" "280"
    (**) Option "EmulateTwoFingerMinW" "7"
    (**) Option "VertScrollDelta" "100"
    (**) Option "HorizScrollDelta" "100"
    (**) Option "VertEdgeScroll" "true"
    (**) Option "HorizEdgeScroll" "false"
    (**) Option "CornerCoasting" "true"
    (**) Option "VertTwoFingerScroll" "true"
    (**) Option "HorizTwoFingerScroll" "true"
    (**) Option "LockedDrags" "true"
    (**) Option "LockedDragTimeout" "5000"
    (**) Option "TapButton1" "3"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "1"
    (**) Option "CircularScrolling" "false"
    (**) Option "CircularPad" "false"
    (**) Option "SingleTapTimeout" "180"
    (**) Option "MinSpeed" "0.4"
    (**) Option "MaxSpeed" "0.7"
    (**) Option "AccelFactor" "0.00995223"
    (**) Option "TrackstickSpeed" "40"
    (**) Option "CoastingSpeed" "0"
    (--) SynapticsTouchpad: touchpad found
    (**) Option "AlwaysCore" "true"
    (**) Option "SendCoreEvents"
    (**) SynapticsTouchpad: always reports core events
    (II) XINPUT: Adding extended input device "SynapticsTouchpad" (type: TOUCHPAD)
    (**) SynapticsTouchpad: (accel) keeping acceleration scheme 1
    (**) SynapticsTouchpad: (accel) acceleration profile 0
    (--) SynapticsTouchpad: touchpad found
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found relative axes
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.2.1
    (**) Option "Device" "/dev/input/event9"
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
    (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
    (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
    (II) UnloadModule: "synaptics"
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "pl"
    (**) Option "xkb_options" "lv3:ralt_switch_multikey"
    (II) config/hal: Adding input device Asus EeePC extra buttons
    (**) Asus EeePC extra buttons: always reports core events
    (**) Asus EeePC extra buttons: Device: "/dev/input/event7"
    (II) Asus EeePC extra buttons: Found keys
    (II) Asus EeePC extra buttons: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Asus EeePC extra buttons" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "pl"
    (**) Option "xkb_options" "lv3:ralt_switch_multikey"
    (II) config/hal: Adding input device USB2.0 UVC 1.3M WebCam
    (**) USB2.0 UVC 1.3M WebCam: always reports core events
    (**) USB2.0 UVC 1.3M WebCam: Device: "/dev/input/event10"
    (II) USB2.0 UVC 1.3M WebCam: Found keys
    (II) USB2.0 UVC 1.3M WebCam: Configuring as keyboard
    (II) XINPUT: Adding extended input device "USB2.0 UVC 1.3M WebCam" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "pl"
    (**) Option "xkb_options" "lv3:ralt_switch_multikey"
    (II) config/hal: Adding input device Sleep Button
    (**) Sleep Button: always reports core events
    (**) Sleep Button: Device: "/dev/input/event4"
    (II) Sleep Button: Found keys
    (II) Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "pl"
    (**) Option "xkb_options" "lv3:ralt_switch_multikey"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event5"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "pl"
    (**) Option "xkb_options" "lv3:ralt_switch_multikey"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event2"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "pl"
    (**) Option "xkb_options" "lv3:ralt_switch_multikey"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event6"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "pl"
    (**) Option "xkb_options" "lv3:ralt_switch_multikey"
    (II) intel(0): EDID vendor "HSD", prod id 1001
    (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
    (II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): No memory allocations
    (II) intel(0): EDID vendor "HSD", prod id 1001
    (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
    (II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
    (--) SynapticsTouchpad: touchpad found
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Asus EeePC extra buttons: Device reopened after 1 attempts.
    (II) USB2.0 UVC 1.3M WebCam: Device reopened after 1 attempts.
    (II) Sleep Button: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    Backtrace:
    0: /usr/bin/X (xorg_backtrace+0x3b) [0x809f81b]
    1: /usr/bin/X (0x8048000+0x54745) [0x809c745]
    2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb787c40c]
    3: /usr/lib/xorg/modules/libfb.so (fbSegment+0x230) [0xb72b9b20]
    4: /usr/lib/xorg/modules/libfb.so (fbZeroLine+0x13c) [0xb72b66dc]
    5: /usr/lib/xorg/modules/libfb.so (fbPolyLine+0x72) [0xb72b63c2]
    6: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb72cb000+0x3b405) [0xb7306405]
    7: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb72cb000+0x33d6b) [0xb72fed6b]
    8: /usr/bin/X (0x8048000+0xc5d38) [0x810dd38]
    9: /usr/bin/X (0x8048000+0x3daeb) [0x8085aeb]
    10: /usr/bin/X (0x8048000+0x40437) [0x8088437]
    11: /usr/bin/X (0x8048000+0x1a705) [0x8062705]
    12: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7471c76]
    13: /usr/bin/X (0x8048000+0x1a2f1) [0x80622f1]
    Segmentation fault at address 0xb6e96ffc
    Fatal server error:
    Caught signal 11 (Segmentation fault). Server aborting
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    (II) UnloadModule: "synaptics"
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) Asus EeePC extra buttons: Close
    (II) UnloadModule: "evdev"
    (II) USB2.0 UVC 1.3M WebCam: Close
    (II) UnloadModule: "evdev"
    (II) Sleep Button: Close
    (II) UnloadModule: "evdev"
    (II) Power Button: Close
    (II) UnloadModule: "evdev"
    (II) Video Bus: Close
    (II) UnloadModule: "evdev"
    (II) Power Button: Close
    (II) UnloadModule: "evdev"
    (II) AIGLX: Suspending AIGLX clients for VT switch
    This bug is similar to:
    https://bugs.launchpad.net/ubuntu/+sour … bug/415357
    Is there any solution for this?
    Last edited by amen (2010-09-30 07:29:05)

    I upgraded my system(new xorg-server, xf86-video-intel...) and problem still exists:
    [ 4658.342]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 4658.342]
    X.Org X Server 1.8.1.902 (1.8.2 RC 2)
    Release Date: 2010-06-21
    [ 4658.342] X Protocol Version 11, Revision 0
    [ 4658.342] Build Operating System: Linux 2.6.34-ARCH i686
    [ 4658.343] Current Operating System: Linux arch 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686
    [ 4658.343] Kernel command line: root=/dev/disk/by-uuid/ea0af8f4-8676-431b-ac66-5a4c7e989ca8 resume=/dev/sda6 ro acpi_osi="!Windows 2009" acpi_backlight=vendor eeepc_laptop.hotplug_disabled=1 logo.nologo quiet console=tty1 splash=silent,theme:arch-black elevator=deadline
    [ 4658.343] Build Date: 21 June 2010 11:54:27AM
    [ 4658.343]
    [ 4658.343] Current version of pixman: 0.18.2
    [ 4658.343] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4658.343] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4658.343] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 22 17:07:49 2010
    [ 4658.344] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4658.344] (==) No Layout section. Using the first Screen section.
    [ 4658.344] (==) No screen section available. Using defaults.
    [ 4658.344] (**) |-->Screen "Default Screen Section" (0)
    [ 4658.344] (**) | |-->Monitor "<default monitor>"
    [ 4658.345] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 4658.345] (==) Automatically adding devices
    [ 4658.345] (==) Automatically enabling devices
    [ 4658.345] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 4658.345] Entry deleted from font path.
    [ 4658.345] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 4658.345] Entry deleted from font path.
    [ 4658.345] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 4658.345] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 4658.345] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 4658.345] (II) Loader magic: 0x81e9d00
    [ 4658.345] (II) Module ABI versions:
    [ 4658.345] X.Org ANSI C Emulation: 0.4
    [ 4658.345] X.Org Video Driver: 7.0
    [ 4658.345] X.Org XInput driver : 9.0
    [ 4658.345] X.Org Server Extension : 3.0
    [ 4658.371] (--) PCI:*(0:0:2:0) 8086:27ae:1043:8340 Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xf7f00000/524288, 0xd0000000/268435456, 0xf7ec0000/262144, I/O @ 0x0000ec00/8
    [ 4658.371] (--) PCI: (0:0:2:1) 8086:27a6:1043:8340 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xf7f80000/524288
    [ 4658.371] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 4658.371] (II) LoadModule: "extmod"
    [ 4658.372] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 4658.372] (II) Module extmod: vendor="X.Org Foundation"
    [ 4658.372] compiled for 1.8.1.902, module version = 1.0.0
    [ 4658.372] Module class: X.Org Server Extension
    [ 4658.372] ABI class: X.Org Server Extension, version 3.0
    [ 4658.373] (II) Loading extension MIT-SCREEN-SAVER
    [ 4658.373] (II) Loading extension XFree86-VidModeExtension
    [ 4658.373] (II) Loading extension XFree86-DGA
    [ 4658.373] (II) Loading extension DPMS
    [ 4658.373] (II) Loading extension XVideo
    [ 4658.373] (II) Loading extension XVideo-MotionCompensation
    [ 4658.373] (II) Loading extension X-Resource
    [ 4658.373] (II) LoadModule: "dbe"
    [ 4658.373] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 4658.373] (II) Module dbe: vendor="X.Org Foundation"
    [ 4658.373] compiled for 1.8.1.902, module version = 1.0.0
    [ 4658.373] Module class: X.Org Server Extension
    [ 4658.373] ABI class: X.Org Server Extension, version 3.0
    [ 4658.373] (II) Loading extension DOUBLE-BUFFER
    [ 4658.374] (II) LoadModule: "glx"
    [ 4658.374] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 4658.374] (II) Module glx: vendor="X.Org Foundation"
    [ 4658.374] compiled for 1.8.1.902, module version = 1.0.0
    [ 4658.374] ABI class: X.Org Server Extension, version 3.0
    [ 4658.374] (==) AIGLX enabled
    [ 4658.374] (II) Loading extension GLX
    [ 4658.374] (II) LoadModule: "record"
    [ 4658.375] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 4658.375] (II) Module record: vendor="X.Org Foundation"
    [ 4658.375] compiled for 1.8.1.902, module version = 1.13.0
    [ 4658.375] Module class: X.Org Server Extension
    [ 4658.375] ABI class: X.Org Server Extension, version 3.0
    [ 4658.375] (II) Loading extension RECORD
    [ 4658.375] (II) LoadModule: "dri"
    [ 4658.375] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 4658.376] (II) Module dri: vendor="X.Org Foundation"
    [ 4658.376] compiled for 1.8.1.902, module version = 1.0.0
    [ 4658.376] ABI class: X.Org Server Extension, version 3.0
    [ 4658.376] (II) Loading extension XFree86-DRI
    [ 4658.376] (II) LoadModule: "dri2"
    [ 4658.376] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 4658.377] (II) Module dri2: vendor="X.Org Foundation"
    [ 4658.377] compiled for 1.8.1.902, module version = 1.2.0
    [ 4658.377] ABI class: X.Org Server Extension, version 3.0
    [ 4658.377] (II) Loading extension DRI2
    [ 4658.377] (==) Matched intel as autoconfigured driver 0
    [ 4658.377] (==) Matched vesa as autoconfigured driver 1
    [ 4658.377] (==) Matched fbdev as autoconfigured driver 2
    [ 4658.377] (==) Assigned the driver to the xf86ConfigLayout
    [ 4658.377] (II) LoadModule: "intel"
    [ 4658.377] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 4658.378] (II) Module intel: vendor="X.Org Foundation"
    [ 4658.378] compiled for 1.8.1, module version = 2.11.0
    [ 4658.378] Module class: X.Org Video Driver
    [ 4658.378] ABI class: X.Org Video Driver, version 7.0
    [ 4658.378] (II) LoadModule: "vesa"
    [ 4658.378] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 4658.379] (II) Module vesa: vendor="X.Org Foundation"
    [ 4658.379] compiled for 1.8.0, module version = 2.3.0
    [ 4658.379] Module class: X.Org Video Driver
    [ 4658.379] ABI class: X.Org Video Driver, version 7.0
    [ 4658.379] (II) LoadModule: "fbdev"
    [ 4658.380] (WW) Warning, couldn't open module fbdev
    [ 4658.380] (II) UnloadModule: "fbdev"
    [ 4658.380] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 4658.380] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    [ 4658.381] (II) VESA: driver for VESA chipsets: vesa
    [ 4658.381] (++) using VT number 8
    [ 4658.388] (II) Primary Device is: PCI 00@00:02:0
    [ 4658.389] (WW) Falling back to old probe method for vesa
    [ 4658.391] drmOpenDevice: node name is /dev/dri/card0
    [ 4658.391] drmOpenDevice: open result is 9, (OK)
    [ 4658.416] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 4658.416] drmOpenDevice: node name is /dev/dri/card0
    [ 4658.416] drmOpenDevice: open result is 9, (OK)
    [ 4658.416] drmOpenByBusid: drmOpenMinor returns 9
    [ 4658.416] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 4658.416] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 4658.416] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 4658.416] (==) intel(0): RGB weight 888
    [ 4658.416] (==) intel(0): Default visual is TrueColor
    [ 4658.416] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
    [ 4658.417] (--) intel(0): Chipset: "945GME"
    [ 4658.417] (==) intel(0): video overlay key set to 0x101fe
    [ 4658.443] (II) intel(0): Output VGA1 has no monitor section
    [ 4658.545] (II) intel(0): Output LVDS1 has no monitor section
    [ 4658.545] (II) intel(0): found backlight control interface /sys/class/backlight/eeepc
    [ 4658.572] (II) intel(0): EDID for output VGA1
    [ 4658.675] (II) intel(0): EDID for output LVDS1
    [ 4658.675] (II) intel(0): Manufacturer: HSD Model: 3e9 Serial#: 1130
    [ 4658.675] (II) intel(0): Year: 2010 Week: 4
    [ 4658.675] (II) intel(0): EDID Version: 1.3
    [ 4658.675] (II) intel(0): Digital Display Input
    [ 4658.675] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13
    [ 4658.675] (II) intel(0): Gamma: 2.20
    [ 4658.676] (II) intel(0): No DPMS capabilities specified
    [ 4658.676] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 4658.676] (II) intel(0): First detailed timing is preferred mode
    [ 4658.676] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.317 greenY: 0.564
    [ 4658.676] (II) intel(0): blueX: 0.152 blueY: 0.131 whiteX: 0.310 whiteY: 0.330
    [ 4658.676] (II) intel(0): Manufacturer's mask: 0
    [ 4658.676] (II) intel(0): Supported detailed timing:
    [ 4658.676] (II) intel(0): clock: 45.0 MHz Image Size: 220 x 129 mm
    [ 4658.676] (II) intel(0): h_active: 1024 h_sync: 1077 h_sync_end 1112 h_blank_end 1200 h_border: 0
    [ 4658.676] (II) intel(0): v_active: 600 v_sync: 604 v_sync_end 609 v_blanking: 625 v_border: 0
    [ 4658.676] (II) intel(0): Supported detailed timing:
    [ 4658.676] (II) intel(0): clock: 51.4 MHz Image Size: 220 x 129 mm
    [ 4658.676] (II) intel(0): h_active: 1024 h_sync: 1117 h_sync_end 1152 h_blank_end 1240 h_border: 0
    [ 4658.676] (II) intel(0): v_active: 600 v_sync: 617 v_sync_end 622 v_blanking: 638 v_border: 0
    [ 4658.676] (II) intel(0):
    [ 4658.676] (II) intel(0):
    [ 4658.676] (II) intel(0): EDID (in hex):
    [ 4658.677] (II) intel(0): 00ffffffffffff002264e9036a040000
    [ 4658.677] (II) intel(0): 0414010380160d780a86269457519027
    [ 4658.677] (II) intel(0): 214f5400000001010101010101010101
    [ 4658.677] (II) intel(0): 010101010101941100b0405819203523
    [ 4658.677] (II) intel(0): 4500dc8100000019161400d840582620
    [ 4658.677] (II) intel(0): 5d231504dc8100000000000000fe0000
    [ 4658.677] (II) intel(0): 000000000000000000000000000000fe
    [ 4658.677] (II) intel(0): 00000000000000000001000000000066
    [ 4658.677] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 4658.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 4658.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 4658.677] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 4658.677] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 4658.677] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 4658.677] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 4658.677] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 4658.678] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 4658.678] (II) intel(0): Printing probed modes for output LVDS1
    [ 4658.678] (II) intel(0): Modeline "1024x600"x60.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
    [ 4658.678] (II) intel(0): Modeline "1024x600"x65.0 51.42 1024 1117 1152 1240 600 601 606 638 -hsync -vsync (41.5 kHz)
    [ 4658.678] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 4658.678] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 4658.678] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 4658.678] (II) intel(0): Output VGA1 disconnected
    [ 4658.678] (II) intel(0): Output LVDS1 connected
    [ 4658.678] (II) intel(0): Using exact sizes for initial modes
    [ 4658.678] (II) intel(0): Output LVDS1 using initial mode 1024x600
    [ 4658.678] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 4658.678] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
    [ 4658.678] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
    [ 4658.678] (==) intel(0): DPI set to (96, 96)
    [ 4658.678] (II) Loading sub module "fb"
    [ 4658.678] (II) LoadModule: "fb"
    [ 4658.678] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 4658.679] (II) Module fb: vendor="X.Org Foundation"
    [ 4658.679] compiled for 1.8.1.902, module version = 1.0.0
    [ 4658.679] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4658.679] (II) UnloadModule: "vesa"
    [ 4658.679] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 4658.679] (==) Depth 24 pixmap format is 32 bpp
    [ 4658.679] (II) intel(0): [DRI2] Setup complete
    [ 4658.679] (II) intel(0): [DRI2] DRI driver: i915
    [ 4658.679] (**) intel(0): Tiling enabled
    [ 4658.680] (**) intel(0): SwapBuffers wait enabled
    [ 4658.680] (==) intel(0): VideoRam: 262144 KB
    [ 4658.680] (II) intel(0): Attempting memory allocation with tiled buffers.
    [ 4658.680] (II) intel(0): Tiled allocation successful.
    [ 4658.680] (II) UXA(0): Driver registered support for the following operations:
    [ 4658.680] (II) solid
    [ 4658.680] (II) copy
    [ 4658.680] (II) composite (RENDER acceleration)
    [ 4658.680] (II) put_image
    [ 4658.680] (==) intel(0): Backing store disabled
    [ 4658.680] (==) intel(0): Silken mouse enabled
    [ 4658.680] (II) intel(0): Initializing HW Cursor
    [ 4658.709] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 4658.715] (==) intel(0): DPMS enabled
    [ 4658.715] (==) intel(0): Intel XvMC decoder disabled
    [ 4658.715] (II) intel(0): Set up textured video
    [ 4658.715] (II) intel(0): Set up overlay video
    [ 4658.715] (II) intel(0): direct rendering: DRI2 Enabled
    [ 4658.715] (--) RandR disabled
    [ 4658.715] (II) Initializing built-in extension Generic Event Extension
    [ 4658.715] (II) Initializing built-in extension SHAPE
    [ 4658.715] (II) Initializing built-in extension MIT-SHM
    [ 4658.715] (II) Initializing built-in extension XInputExtension
    [ 4658.715] (II) Initializing built-in extension XTEST
    [ 4658.715] (II) Initializing built-in extension BIG-REQUESTS
    [ 4658.715] (II) Initializing built-in extension SYNC
    [ 4658.715] (II) Initializing built-in extension XKEYBOARD
    [ 4658.715] (II) Initializing built-in extension XC-MISC
    [ 4658.715] (II) Initializing built-in extension SECURITY
    [ 4658.715] (II) Initializing built-in extension XINERAMA
    [ 4658.715] (II) Initializing built-in extension XFIXES
    [ 4658.716] (II) Initializing built-in extension RENDER
    [ 4658.716] (II) Initializing built-in extension RANDR
    [ 4658.716] (II) Initializing built-in extension COMPOSITE
    [ 4658.716] (II) Initializing built-in extension DAMAGE
    [ 4658.742] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 4658.742] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 4658.742] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 4658.742] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 4658.742] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 4658.743] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    [ 4658.743] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 4658.744] (II) intel(0): Setting screen physical size to 270 x 158
    [ 4659.134] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [ 4659.134] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 4659.134] (II) LoadModule: "evdev"
    [ 4659.135] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 4659.135] (II) Module evdev: vendor="X.Org Foundation"
    [ 4659.135] compiled for 1.8.0, module version = 2.4.0
    [ 4659.135] Module class: X.Org XInput Driver
    [ 4659.135] ABI class: X.Org XInput driver, version 9.0
    [ 4659.135] (**) Power Button: always reports core events
    [ 4659.135] (**) Power Button: Device: "/dev/input/event5"
    [ 4659.143] (II) Power Button: Found keys
    [ 4659.143] (II) Power Button: Configuring as keyboard
    [ 4659.143] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 4659.143] (**) Option "xkb_rules" "evdev"
    [ 4659.143] (**) Option "xkb_model" "evdev"
    [ 4659.143] (**) Option "xkb_layout" "us"
    [ 4659.232] (II) config/udev: Adding input device Video Bus (/dev/input/event1)
    [ 4659.232] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 4659.232] (**) Video Bus: always reports core events
    [ 4659.232] (**) Video Bus: Device: "/dev/input/event1"
    [ 4659.239] (II) Video Bus: Found keys
    [ 4659.239] (II) Video Bus: Configuring as keyboard
    [ 4659.239] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 4659.239] (**) Option "xkb_rules" "evdev"
    [ 4659.239] (**) Option "xkb_model" "evdev"
    [ 4659.240] (**) Option "xkb_layout" "us"
    [ 4659.243] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 4659.243] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 4659.244] (**) Power Button: always reports core events
    [ 4659.244] (**) Power Button: Device: "/dev/input/event4"
    [ 4659.253] (II) Power Button: Found keys
    [ 4659.253] (II) Power Button: Configuring as keyboard
    [ 4659.253] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 4659.253] (**) Option "xkb_rules" "evdev"
    [ 4659.253] (**) Option "xkb_model" "evdev"
    [ 4659.253] (**) Option "xkb_layout" "us"
    [ 4659.254] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 4659.254] (II) No input driver/identifier specified (ignoring)
    [ 4659.254] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 4659.254] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 4659.254] (**) Sleep Button: always reports core events
    [ 4659.255] (**) Sleep Button: Device: "/dev/input/event3"
    [ 4659.263] (II) Sleep Button: Found keys
    [ 4659.263] (II) Sleep Button: Configuring as keyboard
    [ 4659.263] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [ 4659.263] (**) Option "xkb_rules" "evdev"
    [ 4659.263] (**) Option "xkb_model" "evdev"
    [ 4659.263] (**) Option "xkb_layout" "us"
    [ 4659.265] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [ 4659.265] (II) No input driver/identifier specified (ignoring)
    [ 4659.270] (II) config/udev: Adding input device USB2.0 UVC 1.3M WebCam (/dev/input/event9)
    [ 4659.270] (**) USB2.0 UVC 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
    [ 4659.270] (**) USB2.0 UVC 1.3M WebCam: always reports core events
    [ 4659.270] (**) USB2.0 UVC 1.3M WebCam: Device: "/dev/input/event9"
    [ 4659.283] (II) USB2.0 UVC 1.3M WebCam: Found keys
    [ 4659.283] (II) USB2.0 UVC 1.3M WebCam: Configuring as keyboard
    [ 4659.283] (II) XINPUT: Adding extended input device "USB2.0 UVC 1.3M WebCam" (type: KEYBOARD)
    [ 4659.283] (**) Option "xkb_rules" "evdev"
    [ 4659.283] (**) Option "xkb_model" "evdev"
    [ 4659.283] (**) Option "xkb_layout" "us"
    [ 4659.289] (II) config/udev: Adding input device Asus EeePC extra buttons (/dev/input/event7)
    [ 4659.289] (**) Asus EeePC extra buttons: Applying InputClass "evdev keyboard catchall"
    [ 4659.289] (**) Asus EeePC extra buttons: always reports core events
    [ 4659.289] (**) Asus EeePC extra buttons: Device: "/dev/input/event7"
    [ 4659.299] (II) Asus EeePC extra buttons: Found keys
    [ 4659.299] (II) Asus EeePC extra buttons: Configuring as keyboard
    [ 4659.299] (II) XINPUT: Adding extended input device "Asus EeePC extra buttons" (type: KEYBOARD)
    [ 4659.299] (**) Option "xkb_rules" "evdev"
    [ 4659.299] (**) Option "xkb_model" "evdev"
    [ 4659.300] (**) Option "xkb_layout" "us"
    [ 4659.301] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 4659.301] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 4659.301] (**) AT Translated Set 2 keyboard: always reports core events
    [ 4659.301] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 4659.316] (II) AT Translated Set 2 keyboard: Found keys
    [ 4659.316] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 4659.316] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 4659.316] (**) Option "xkb_rules" "evdev"
    [ 4659.316] (**) Option "xkb_model" "evdev"
    [ 4659.316] (**) Option "xkb_layout" "us"
    [ 4659.317] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
    [ 4659.317] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 4659.317] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 4659.317] (II) LoadModule: "synaptics"
    [ 4659.318] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 4659.318] (II) Module synaptics: vendor="X.Org Foundation"
    [ 4659.318] compiled for 1.8.0.902, module version = 1.2.2
    [ 4659.318] Module class: X.Org XInput Driver
    [ 4659.318] ABI class: X.Org XInput driver, version 9.0
    [ 4659.318] (II) Synaptics touchpad driver version 1.2.2
    [ 4659.318] (**) Option "Device" "/dev/input/event6"
    [ 4659.359] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    [ 4659.359] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    [ 4659.359] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 4659.359] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    [ 4659.359] (II) SynPS/2 Synaptics TouchPad: buttons: left right
    [ 4659.359] (**) Option "SHMConfig" "on"
    [ 4659.360] (**) Option "FingerPress" "256"
    [ 4659.360] (**) Option "EmulateTwoFingerMinZ" "0"
    [ 4659.360] (**) Option "VertScrollDelta" "250"
    [ 4659.360] (**) Option "VertEdgeScroll" "on"
    [ 4659.360] (**) Option "HorizEdgeScroll" "off"
    [ 4659.360] (**) Option "VertTwoFingerScroll" "off"
    [ 4659.360] (**) Option "HorizTwoFingerScroll" "off"
    [ 4659.360] (**) Option "LockedDrags" "on"
    [ 4659.360] (**) Option "TapButton1" "3"
    [ 4659.360] (**) Option "TapButton2" "2"
    [ 4659.360] (**) Option "TapButton3" "1"
    [ 4659.360] (**) Option "CircularScrolling" "off"
    [ 4659.360] (**) Option "CircScrollTrigger" "2"
    [ 4659.360] (**) Option "MinSpeed" "0.4"
    [ 4659.361] (**) Option "MaxSpeed" "0.7"
    [ 4659.361] (**) Option "AccelFactor" "0.00995223"
    [ 4659.389] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 4659.389] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 4659.402] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    [ 4659.403] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 4659.403] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 4659.403] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 4659.403] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 4659.429] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 4659.430] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 4659.430] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 4659.430] (II) Synaptics touchpad driver version 1.2.2
    [ 4659.876] SynPS/2 Synaptics TouchPad no synaptics event device found
    [ 4659.876] (**) Option "Device" "/dev/input/mouse0"
    [ 4659.889] (**) Option "SHMConfig" "on"
    [ 4659.889] (**) Option "FingerPress" "256"
    [ 4659.889] (**) Option "EmulateTwoFingerMinZ" "0"
    [ 4659.890] (**) Option "VertScrollDelta" "250"
    [ 4659.890] (**) Option "VertEdgeScroll" "on"
    [ 4659.890] (**) Option "HorizEdgeScroll" "off"
    [ 4659.890] (**) Option "VertTwoFingerScroll" "off"
    [ 4659.890] (**) Option "HorizTwoFingerScroll" "off"
    [ 4659.890] (**) Option "LockedDrags" "on"
    [ 4659.890] (**) Option "TapButton1" "3"
    [ 4659.890] (**) Option "TapButton2" "2"
    [ 4659.890] (**) Option "TapButton3" "1"
    [ 4659.890] (**) Option "CircularScrolling" "off"
    [ 4659.890] (**) Option "CircScrollTrigger" "2"
    [ 4659.890] (**) Option "MinSpeed" "0.4"
    [ 4659.890] (**) Option "MaxSpeed" "0.7"
    [ 4659.890] (**) Option "AccelFactor" "0.00995223"
    [ 4659.911] Query no Synaptics: 6003C8
    [ 4659.911] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
    [ 4659.911] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
    [ 4659.949] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
    [ 4659.949] (II) UnloadModule: "synaptics"
    [ 4665.312] (II) intel(0): EDID vendor "HSD", prod id 1001
    [ 4665.312] (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
    [ 4665.312] (II) intel(0): Printing DDC gathered Modelines:
    [ 4665.312] (II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz)
    [ 4665.312] (II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 600 617 622 638 -hsync -vsync (41.5 kHz)
    [ 5029.658]
    Backtrace:
    [ 5029.658] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80df05b]
    [ 5029.658] 1: /usr/bin/X (0x8048000+0x63da5) [0x80abda5]
    [ 5029.658] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb783040c]
    [ 5029.658] 3: /usr/lib/xorg/modules/libfb.so (fbSegment+0x22e) [0xb73ac68e]
    [ 5029.658] 4: /usr/lib/xorg/modules/libfb.so (fbZeroLine+0x13c) [0xb73a832c]
    [ 5029.658] 5: /usr/lib/xorg/modules/libfb.so (fbPolyLine+0x72) [0xb73a8412]
    [ 5029.658] 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb73b1000+0x4143d) [0xb73f243d]
    [ 5029.658] 7: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb73b1000+0x3a5ab) [0xb73eb5ab]
    [ 5029.658] 8: /usr/bin/X (0x8048000+0xc8c2b) [0x8110c2b]
    [ 5029.658] 9: /usr/bin/X (0x8048000+0x1d5ec) [0x80655ec]
    [ 5029.658] 10: /usr/bin/X (0x8048000+0x2170f) [0x806970f]
    [ 5029.658] 11: /usr/bin/X (0x8048000+0x1a4b5) [0x80624b5]
    [ 5029.659] 12: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7566c76]
    [ 5029.659] 13: /usr/bin/X (0x8048000+0x1a0a1) [0x80620a1]
    [ 5029.659] Segmentation fault at address 0xb6e06ffc
    [ 5029.659]
    Fatal server error:
    [ 5029.659] Caught signal 11 (Segmentation fault). Server aborting
    [ 5029.659]
    [ 5029.659]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 5029.659] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 5029.659]
    [ 5029.672] (II) Power Button: Close
    [ 5029.673] (II) UnloadModule: "evdev"
    [ 5029.686] (II) Video Bus: Close
    [ 5029.686] (II) UnloadModule: "evdev"
    [ 5029.699] (II) Power Button: Close
    [ 5029.699] (II) UnloadModule: "evdev"
    [ 5029.713] (II) Sleep Button: Close
    [ 5029.713] (II) UnloadModule: "evdev"
    [ 5029.726] (II) USB2.0 UVC 1.3M WebCam: Close
    [ 5029.726] (II) UnloadModule: "evdev"
    [ 5029.739] (II) Asus EeePC extra buttons: Close
    [ 5029.739] (II) UnloadModule: "evdev"
    [ 5029.753] (II) AT Translated Set 2 keyboard: Close
    [ 5029.753] (II) UnloadModule: "evdev"
    [ 5029.787] (II) UnloadModule: "synaptics"
    [ 5029.787] (II) AIGLX: Suspending AIGLX clients for VT switch
    Edit:
    Problem solved after system update.
    Last edited by amen (2010-09-30 07:28:12)

  • Lenovo T400 (4500MHD): Xorg 7.4, xf86-video-intel-2.4.3 upgrade

    hi!
    I would like to ask you if anyone with an lenovo t400 has done a successful upgrade to xorg 7.4 with xf86-video-intel-2.4.3 and intel-dri-7.2-1. I'm still using xf86-video-intel-2.3.2-1 and intel-dri-7.0.3-1, though I'm not completely satisfied with it (sometimes X does not start, suspend doesn't work anymore).
    I've read a lot about upgrading troubles and I would really appreciate sharing your experience.
    thanks in advance,
    woifi

    woifi,
    I have the same machine and the upgrade to Xorg and xf86-video-intel make my machine not able to come back from a suspend/hibernate. The screen comes back, but everything is frozen. I have been able, however, to use the "vesa" driver in Xorg and get suspend/hibernate to work then. I can't use Compiz then, but I would rather have suspend than Compiz at this point. I'm hoping that the novelty of this machine and the Intel GMA 4500HD are causing the wrinkles in the drivers.

  • [FIXED] kernel26-lts for Intel driver's conflict with KMS in kernel26

    Hi,
    I am running on a GM965/GL960 Intel video card. During the install (and later use) of Arch, I had to add i915.modeset=0 on the kernel line in grub when booting to get to a visible terminal; otherwise I used to get a blank screen after udev loaded. However, taking a leaf from Ubuntu on same laptop (and since most fixes for this issue recommended downgrading the kernel), I installed kernel26-lts. This works quite well with the latest xorg (1.9) and intel driver (2.12.0-3).
    kernel26 - 2.6.35
    kernel26-lts - 2.6.32-23
    1. Are desktop users recommended to use the LTS kernel?
    2. For certain components (Broadcom wi-fi), where I intend to install drivers from the AUR - will they work on LTS kernel?
    3. Is this a good strategy? I intend to keep kernel26 also on my machine and when the Intel issue gets fixed, I will switch back to kernel26.
    Last edited by rohit_b (2010-10-01 02:00:30)

    1. If it works for you, use it.
    2. There are -lts versions of some packages and compiling others against any supported kernel should be fine.
    3. Seems nice and simple.
    You can also try .34 version or the regular kernel.

  • Problem with 3 monitors Intel HD Graphics and GeForce GTX 560

    I would like to attach 3 monitors to my box -- 1 to integrated Intel card and 2 to discreet Nvidia. I've tried different configs but I failed to make monitors connected to different cards to work at the same time. I have system with stock kernel, latest updates and the following configuration:
    $ lspci | egrep "VGA|Disp"
    00:02.0 Display controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
    $ pacman -Qi xorg-server xf86-video-intel nvidia awesome-git linux | egrep "Name|Version"
    Name : xorg-server
    Version : 1.17.1-3
    Name : xf86-video-intel
    Version : 2.99.917-3
    Name : nvidia
    Version : 346.47-3
    Name : awesome-git
    Version : 3.5.2.397.gdde5b1b-1
    Name : linux
    Version : 3.18.6-1
    $ lsmod | egrep 'i915|nvidia'
    nvidia 8335766 46
    i915 946695 2
    button 12953 1 i915
    i2c_algo_bit 12744 1 i915
    video 18043 2 i915,asus_wmi
    drm_kms_helper 80985 1 i915
    drm 263481 7 i915,drm_kms_helper,nvidia
    i2c_core 50152 6
    drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia
    intel_gtt 17848 2 i915,intel_agp
    I've tried different xorg configs. Here is the best one. All 3 monitors are active with it (I could drag cursor over them) but only 2 (which connected to nvidia card) display DE.
    Section "DRI"
    Mode 0666
    EndSection
    Section "Monitor"
    Identifier "SAM"
    ModelName "Samsung SMS27A850"
    HorizSync 30.0 - 90.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    DisplaySize 597 336 # In millimeters
    EndSection
    Section "Monitor"
    Identifier "VS"
    ModelName "ViewSonic VG1930wm"
    Option "DPMS"
    Option "RightOf" "SAM"
    Option "Rotate" "left"
    EndSection
    Section "Monitor"
    Identifier "BNQ"
    ModelName "BenQ FP737s"
    Option "DPMS"
    Option "LeftOf" "SAM"
    Option "Rotate" "left"
    EndSection
    Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 560 Ti"
    BusID "01:00:0"
    Option "Monitor-DVI-I-1" "SAM"
    Option "Monitor-DVI-I-2" "VS"
    EndSection
    Section "Device"
    Identifier "intel"
    Driver "intel"
    Option "AccelMethod" "none"
    VendorName "Intel"
    BoardName "Intel Integrated Graphic Controller"
    BusID "00:02:0"
    Option "Monitor-VGA-0" "BNQ"
    EndSection
    Section "Screen"
    Identifier "SAM-Screen"
    Device "nvidia"
    Monitor "SAM"
    EndSection
    Section "Screen"
    Identifier "VS-Screen"
    Device "nvidia"
    Monitor "VS"
    EndSection
    Section "Screen"
    Identifier "BNQ-Screen"
    Device "intel"
    Monitor "BNQ"
    EndSection
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "SAM-Screen"
    Screen 1 "VS-Screen" RightOf "SAM-Screen"
    Screen 2 "BNQ-Screen" LeftOf "SAM-Screen"
    Option "Xinerama" "0"
    EndSection
    Also, xrandr shows last monitor (VGA-0, it plugged into Intel card) as disconnected
    $ xrandr
    Screen 0: minimum 8 x 8, current 3460 x 1440, maximum 16384 x 16384
    DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
    VGA-0 disconnected (normal left inverted right x axis y axis)
    DVI-I-1 connected 2560x1440+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
    2560x1440 59.95*+
    1920x1200 59.88
    1920x1080 60.00 50.00
    1680x1050 59.95
    1600x1200 60.00
    1440x900 59.89
    1280x1024 75.02 60.02
    1280x960 60.00
    1280x800 59.81
    1280x720 60.00 50.00
    1152x864 75.00
    1024x768 75.03 70.07 60.00
    800x600 75.00 72.19 60.32 56.25
    720x576 50.00
    720x480 59.94
    640x480 75.00 72.81 59.94
    HDMI-0 disconnected (normal left inverted right x axis y axis)
    DVI-I-2 connected 900x1440+2560+0 left (normal left inverted right x axis y axis) 410mm x 256mm
    1440x900 59.89*+ 74.98
    1280x1024 75.02 60.02
    1280x960 60.00
    1152x864 75.00
    1024x768 75.03 70.07 60.00
    800x600 75.00 72.19 60.32 56.25
    640x480 75.00 72.81 59.94
    640x400 70.10
    But it's still posible to start application on last monitor with 'env DISPLAY:=0.1 urxvt'
    Here is full Xorg log file and highlights:
    [ 4789.920] (EE) intel(1): Cannot position output VGA1 relative to unknown output SAM
    [ 4792.053] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
    [ 4792.053] (II) intel(G0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
    [ 4792.053] (II) intel(G0): [drm] command pid dev master a uid magic
    [ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 y y 0 0
    [ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 n y 0 0
    [ 4792.053] (EE) intel(G0): Failed to claim DRM device.
    [ 4792.053] (II) UnloadModule: "intel"
    [ 4789.342]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 4789.342] X Protocol Version 11, Revision 0
    [ 4789.342] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 4789.342] Current Operating System: Linux earth 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
    [ 4789.342] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dc49b07c-e67c-4b6f-91f7-7c1adc050e21 rw quiet ipv6.disable=1 init=/usr/lib/systemd/systemd security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd
    [ 4789.342] Build Date: 22 February 2015 12:50:32PM
    [ 4789.342]
    [ 4789.342] Current version of pixman: 0.32.6
    [ 4789.342] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4789.342] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4789.342] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:43:55 2015
    [ 4789.342] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4789.342] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 4789.342] (==) ServerLayout "Layout0"
    [ 4789.342] (**) |-->Screen "SAM-Screen" (0)
    [ 4789.342] (**) | |-->Monitor "SAM"
    [ 4789.343] (**) | |-->Device "nvidia"
    [ 4789.343] (**) |-->Screen "VS-Screen" (1)
    [ 4789.343] (**) | |-->Monitor "VS"
    [ 4789.343] (**) | |-->Device "nvidia"
    [ 4789.343] (**) |-->Screen "BNQ-Screen" (2)
    [ 4789.343] (**) | |-->Monitor "BNQ"
    [ 4789.343] (**) | |-->Device "intel"
    [ 4789.343] (**) Option "Xinerama" "0"
    [ 4789.343] (==) Automatically adding devices
    [ 4789.343] (==) Automatically enabling devices
    [ 4789.343] (==) Automatically adding GPU devices
    [ 4789.343] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 4789.343] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 4789.343] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 4789.343] (II) Loader magic: 0x815d80
    [ 4789.343] (II) Module ABI versions:
    [ 4789.343] X.Org ANSI C Emulation: 0.4
    [ 4789.343] X.Org Video Driver: 19.0
    [ 4789.343] X.Org XInput driver : 21.0
    [ 4789.343] X.Org Server Extension : 9.0
    [ 4789.344] (EE) systemd-logind: failed to get session: PID 10086 does not belong to any known session
    [ 4789.345] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 4789.345] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 4789.347] (--) PCI: (0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 4789.347] (--) PCI:*(0:1:0:0) 10de:1200:10b0:0401 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 4789.347] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 4789.347] (II) LoadModule: "glx"
    [ 4789.347] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 4789.359] (II) Module glx: vendor="NVIDIA Corporation"
    [ 4789.359] compiled for 4.0.2, module version = 1.0.0
    [ 4789.359] Module class: X.Org Server Extension
    [ 4789.359] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
    [ 4789.359] (II) LoadModule: "nvidia"
    [ 4789.359] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 4789.360] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 4789.360] compiled for 4.0.2, module version = 1.0.0
    [ 4789.360] Module class: X.Org Video Driver
    [ 4789.360] (II) LoadModule: "intel"
    [ 4789.360] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 4789.360] (II) Module intel: vendor="X.Org Foundation"
    [ 4789.360] compiled for 1.17.1, module version = 2.99.917
    [ 4789.360] Module class: X.Org Video Driver
    [ 4789.360] ABI class: X.Org Video Driver, version 19.0
    [ 4789.360] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
    [ 4789.360] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 4789.360] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 4789.360] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
    [ 4789.360] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
    [ 4789.360] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
    [ 4789.360] (++) using VT number 7
    [ 4789.471] (II) Loading sub module "fb"
    [ 4789.471] (II) LoadModule: "fb"
    [ 4789.471] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 4789.471] (II) Module fb: vendor="X.Org Foundation"
    [ 4789.471] compiled for 1.17.1, module version = 1.0.0
    [ 4789.471] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4789.472] (II) Loading sub module "wfb"
    [ 4789.472] (II) LoadModule: "wfb"
    [ 4789.472] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 4789.472] (II) Module wfb: vendor="X.Org Foundation"
    [ 4789.472] compiled for 1.17.1, module version = 1.0.0
    [ 4789.472] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4789.472] (II) Loading sub module "ramdac"
    [ 4789.472] (II) LoadModule: "ramdac"
    [ 4789.472] (II) Module "ramdac" already built-in
    [ 4789.473] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
    [ 4789.474] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
    [ 4789.474] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "SAM-Screen" for depth/fbbpp 24/32
    [ 4789.474] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 4789.474] (==) NVIDIA(0): RGB weight 888
    [ 4789.474] (==) NVIDIA(0): Default visual is TrueColor
    [ 4789.474] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 4789.474] (**) NVIDIA(0): Enabling 2D acceleration
    [ 4789.841] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
    [ 4789.842] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
    [ 4789.842] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 4789.842] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
    [ 4789.842] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 4789.875] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
    [ 4789.875] (--) NVIDIA(0): CRT-0
    [ 4789.875] (--) NVIDIA(0): CRT-1
    [ 4789.875] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0) (boot, connected)
    [ 4789.875] (--) NVIDIA(0): DFP-1
    [ 4789.875] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2) (connected)
    [ 4789.875] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 4789.875] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
    [ 4789.875] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0): Internal TMDS
    [ 4789.875] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
    [ 4789.875] (--) NVIDIA(0): DFP-1: Internal TMDS
    [ 4789.875] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [ 4789.875] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2): Internal TMDS
    [ 4789.875] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
    [ 4789.875] (**) NVIDIA(0): Option "Rotate" "left"
    [ 4789.875] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4789.875] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
    [ 4789.875] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4789.875] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4789.875] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 4789.875] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4789.875] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4789.875] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 4789.876] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4789.876] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 4789.876] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4789.876] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4789.876] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 4789.876] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4789.876] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 4789.876] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4789.876] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4789.876] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    [ 4789.877] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4789.877] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
    [ 4789.877] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4789.878] (==) NVIDIA(0):
    [ 4789.878] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 4789.878] (==) NVIDIA(0): will be used as the requested mode.
    [ 4789.878] (==) NVIDIA(0):
    [ 4789.878] (II) NVIDIA(0): Validated MetaModes:
    [ 4789.878] (II) NVIDIA(0):
    [ 4789.878] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select{Rotation=90}"
    [ 4789.878] (II) NVIDIA(0): Virtual screen size determined to be 3460 x 1440
    [ 4789.905] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
    [ 4789.905] (--) NVIDIA(0): option
    [ 4789.906] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
    [ 4789.906] (--) intel(1): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
    [ 4789.906] (II) intel(1): Creating default Display subsection in Screen section
    "BNQ-Screen" for depth/fbbpp 24/32
    [ 4789.906] (==) intel(1): Depth 24, (--) framebuffer bpp 32
    [ 4789.906] (==) intel(1): RGB weight 888
    [ 4789.906] (==) intel(1): Default visual is TrueColor
    [ 4789.906] (**) intel(1): Option "AccelMethod" "none"
    [ 4789.906] (II) intel(1): Output VGA1 using monitor section BNQ
    [ 4789.906] (**) intel(1): Option "LeftOf" "SAM"
    [ 4789.906] (**) intel(1): Option "Rotate" "left"
    [ 4789.906] (II) intel(1): Enabled output VGA1
    [ 4789.906] (II) intel(1): Output HDMI1 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output HDMI1
    [ 4789.906] (II) intel(1): Output DP1 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output DP1
    [ 4789.906] (II) intel(1): Output HDMI2 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output HDMI2
    [ 4789.906] (II) intel(1): Output HDMI3 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output HDMI3
    [ 4789.906] (II) intel(1): Output DP2 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output DP2
    [ 4789.906] (II) intel(1): Output DP3 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output DP3
    [ 4789.906] (--) intel(1): Using a maximum size of 256x256 for hardware cursors
    [ 4789.906] (II) intel(1): Output VIRTUAL1 has no monitor section
    [ 4789.906] (II) intel(1): Enabled output VIRTUAL1
    [ 4789.906] (II) intel(1): EDID for output DP1
    [ 4789.906] (II) intel(1): EDID for output DP2
    [ 4789.906] (II) intel(1): EDID for output DP3
    [ 4789.906] (II) intel(1): EDID for output HDMI1
    [ 4789.906] (II) intel(1): EDID for output HDMI2
    [ 4789.907] (II) intel(1): EDID for output HDMI3
    [ 4789.920] (II) intel(1): EDID for output VGA1
    [ 4789.920] (II) intel(1): Manufacturer: BNQ Model: 7659 Serial#: 28
    [ 4789.920] (II) intel(1): Year: 2003 Week: 39
    [ 4789.920] (II) intel(1): EDID Version: 1.3
    [ 4789.920] (II) intel(1): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 4789.920] (II) intel(1): Sync: Separate Composite
    [ 4789.920] (II) intel(1): Max Image Size [cm]: horiz.: 34 vert.: 27
    [ 4789.920] (II) intel(1): Gamma: 2.20
    [ 4789.920] (II) intel(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 4789.920] (II) intel(1): First detailed timing is preferred mode
    [ 4789.920] (II) intel(1): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.611
    [ 4789.920] (II) intel(1): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330
    [ 4789.920] (II) intel(1): Supported established timings:
    [ 4789.920] (II) intel(1): 720x400@70Hz
    [ 4789.920] (II) intel(1): 640x480@60Hz
    [ 4789.920] (II) intel(1): 640x480@67Hz
    [ 4789.920] (II) intel(1): 640x480@72Hz
    [ 4789.920] (II) intel(1): 640x480@75Hz
    [ 4789.920] (II) intel(1): 800x600@56Hz
    [ 4789.920] (II) intel(1): 800x600@60Hz
    [ 4789.920] (II) intel(1): 800x600@72Hz
    [ 4789.920] (II) intel(1): 800x600@75Hz
    [ 4789.920] (II) intel(1): 832x624@75Hz
    [ 4789.920] (II) intel(1): 1024x768@60Hz
    [ 4789.920] (II) intel(1): 1024x768@70Hz
    [ 4789.920] (II) intel(1): 1024x768@75Hz
    [ 4789.920] (II) intel(1): 1280x1024@75Hz
    [ 4789.920] (II) intel(1): 1152x864@75Hz
    [ 4789.920] (II) intel(1): Manufacturer's mask: 0
    [ 4789.920] (II) intel(1): Supported standard timings:
    [ 4789.920] (II) intel(1): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 4789.920] (II) intel(1): #1: hsize: 1280 vsize 1024 refresh: 76 vid: 36993
    [ 4789.920] (II) intel(1): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 4789.920] (II) intel(1): #3: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
    [ 4789.920] (II) intel(1): Supported detailed timing:
    [ 4789.920] (II) intel(1): clock: 108.0 MHz Image Size: 338 x 270 mm
    [ 4789.920] (II) intel(1): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 4789.920] (II) intel(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 4789.920] (II) intel(1): Supported detailed timing:
    [ 4789.920] (II) intel(1): clock: 25.2 MHz Image Size: 304 x 228 mm
    [ 4789.920] (II) intel(1): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
    [ 4789.920] (II) intel(1): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
    [ 4789.920] (II) intel(1): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
    [ 4789.920] (II) intel(1): Monitor name: BenQ FP737s
    [ 4789.920] (II) intel(1): EDID (in hex):
    [ 4789.920] (II) intel(1): 00ffffffffffff0009d159761c000000
    [ 4789.920] (II) intel(1): 270d01036c221b78eac6f6a3574a9c23
    [ 4789.920] (II) intel(1): 114f54bfef80714f81908180818c0101
    [ 4789.920] (II) intel(1): 010101010101302a009851002a403070
    [ 4789.920] (II) intel(1): 1300520e1100001ed50980a0205e6310
    [ 4789.920] (II) intel(1): 1060520830e41000001a000000fd0038
    [ 4789.920] (II) intel(1): 4b1f510e000a202020202020000000fc
    [ 4789.920] (II) intel(1): 0042656e51204650373337730a200072
    [ 4789.920] (II) intel(1): Printing probed modes for output VGA1
    [ 4789.920] (II) intel(1): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 4789.920] (II) intel(1): Modeline "1280x1024"x76.0 141.81 1280 1376 1512 1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
    [ 4789.920] (II) intel(1): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 4789.920] (II) intel(1): Modeline "1280x1024"x72.0 132.84 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
    [ 4789.920] (II) intel(1): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 4789.920] (II) intel(1): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 4789.920] (II) intel(1): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 4789.920] (II) intel(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 4789.920] (II) intel(1): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 4789.920] (II) intel(1): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 4789.920] (II) intel(1): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 4789.920] (II) intel(1): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 4789.920] (II) intel(1): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 4789.920] (II) intel(1): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 4789.920] (II) intel(1): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 4789.920] (II) intel(1): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 4789.920] (II) intel(1): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 4789.920] (II) intel(1): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 4789.920] (II) intel(1): Modeline "640x350"x70.1 25.17 640 656 752 800 350 387 389 449 +hsync -vsync (31.5 kHz e)
    [ 4789.920] (II) intel(1): EDID for output VIRTUAL1
    [ 4789.920] (II) intel(1): Output DP1 disconnected
    [ 4789.920] (II) intel(1): Output DP2 disconnected
    [ 4789.920] (II) intel(1): Output DP3 disconnected
    [ 4789.920] (II) intel(1): Output HDMI1 disconnected
    [ 4789.920] (II) intel(1): Output HDMI2 disconnected
    [ 4789.920] (II) intel(1): Output HDMI3 disconnected
    [ 4789.920] (II) intel(1): Output VGA1 connected
    [ 4789.920] (II) intel(1): Output VIRTUAL1 disconnected
    [ 4789.920] (II) intel(1): Using user preference for initial modes
    [ 4789.920] (II) intel(1): Output VGA1 using initial mode 1280x1024
    [ 4789.920] (EE) intel(1): Cannot position output VGA1 relative to unknown output SAM
    [ 4789.920] (II) intel(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 4789.920] (==) intel(1): TearFree disabled
    [ 4789.920] (==) intel(1): DPI set to (96, 96)
    [ 4789.920] (II) Loading sub module "dri2"
    [ 4789.920] (II) LoadModule: "dri2"
    [ 4789.920] (II) Module "dri2" already built-in
    [ 4789.920] (II) Loading sub module "present"
    [ 4789.920] (II) LoadModule: "present"
    [ 4789.920] (II) Module "present" already built-in
    [ 4792.053] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
    [ 4792.053] (II) intel(G0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
    [ 4792.053] (II) intel(G0): [drm] command pid dev master a uid magic
    [ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 y y 0 0
    [ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 n y 0 0
    [ 4792.053] (EE) intel(G0): Failed to claim DRM device.
    [ 4792.053] (II) UnloadModule: "intel"
    [ 4792.053] (--) Depth 24 pixmap format is 32 bpp
    [ 4792.053] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 4792.053] (II) NVIDIA: access.
    [ 4792.057] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 4792.057] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 4792.057] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 4792.057] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 4792.057] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 4792.057] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 4792.057] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 4792.057] (II) NVIDIA(0): Config Options in the README.
    [ 4792.091] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select{Rotation=90}"
    [ 4792.264] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 4792.264] (==) NVIDIA(0): Backing store enabled
    [ 4792.264] (==) NVIDIA(0): Silken mouse enabled
    [ 4792.264] (**) NVIDIA(0): DPMS enabled
    [ 4792.264] (II) Loading sub module "dri2"
    [ 4792.264] (II) LoadModule: "dri2"
    [ 4792.264] (II) Module "dri2" already built-in
    [ 4792.264] (II) NVIDIA(0): [DRI2] Setup complete
    [ 4792.264] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 4792.264] (--) RandR disabled
    [ 4792.264] (II) intel(1): SNA initialized with disabled backend
    [ 4792.264] (==) intel(1): Backing store enabled
    [ 4792.264] (==) intel(1): Silken mouse enabled
    [ 4792.264] (II) intel(1): HW Cursor enabled
    [ 4792.264] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 4792.264] (**) intel(1): DPMS enabled
    [ 4792.264] (==) intel(1): display hotplug detection enabled
    [ 4792.264] (II) intel(1): Textured video not supported on this hardware
    [ 4792.264] (WW) intel(1): loading DRI2 whilst the GPU is wedged.
    [ 4792.264] (II) intel(1): [DRI2] Setup complete
    [ 4792.264] (II) intel(1): [DRI2] DRI driver: i965
    [ 4792.264] (II) intel(1): [DRI2] VDPAU driver: i965
    [ 4792.264] (II) intel(1): direct rendering: DRI2 enabled
    [ 4792.265] (II) intel(1): hardware support for Present enabled
    [ 4792.265] (WW) intel(1): Option "Monitor-VGA-0" is not used
    [ 4792.265] (WW) intel(1): Option "LeftOf" is not used
    [ 4792.265] (WW) intel(1): Option "Rotate" is not used
    [ 4792.265] (--) RandR disabled
    [ 4792.268] (II) Initializing extension GLX
    [ 4792.268] (II) Indirect GLX disabled.(II) intel(1): switch to mode [email protected] on VGA1 using pipe 0, position (0, 0), rotation left, reflection none
    [ 4792.332] (II) intel(1): Setting screen physical size to 270 x 338
    [ 4792.386] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 4792.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 4792.386] (**) Power Button: Applying InputClass "libinput keyboard catchall"
    [ 4792.386] (**) Power Button: Applying InputClass "system-keyboard"
    [ 4792.386] (II) LoadModule: "libinput"
    [ 4792.386] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
    [ 4792.387] (II) Module libinput: vendor="X.Org Foundation"
    [ 4792.387] compiled for 1.17.1, module version = 0.7.0
    [ 4792.387] Module class: X.Org XInput Driver
    [ 4792.387] ABI class: X.Org XInput driver, version 21.0
    [ 4792.387] (II) Using input driver 'libinput' for 'Power Button'
    [ 4792.387] (**) Power Button: always reports core events
    [ 4792.387] (**) Option "Device" "/dev/input/event2"
    [ 4792.387] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
    [ 4792.387] (II) input device 'Power Button', /dev/input/event2 is a keyboard
    [ 4792.399] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 4792.399] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 4792.399] (**) Option "xkb_model" "pc104"
    [ 4792.399] (**) Option "xkb_layout" "us,ru"
    [ 4792.399] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
    [ 4792.432] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
    [ 4792.432] (II) input device 'Power Button', /dev/input/event2 is a keyboard
    [ 4792.432] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 4792.432] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 4792.432] (**) Power Button: Applying InputClass "libinput keyboard catchall"
    [ 4792.432] (**) Power Button: Applying InputClass "system-keyboard"
    [ 4792.432] (II) Using input driver 'libinput' for 'Power Button'
    [ 4792.432] (**) Power Button: always reports core events
    [ 4792.432] (**) Option "Device" "/dev/input/event1"
    [ 4792.433] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
    [ 4792.433] (II) input device 'Power Button', /dev/input/event1 is a keyboard
    [ 4792.489] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
    [ 4792.489] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 4792.489] (**) Option "xkb_model" "pc104"
    [ 4792.489] (**) Option "xkb_layout" "us,ru"
    [ 4792.489] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
    [ 4792.490] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
    [ 4792.490] (II) input device 'Power Button', /dev/input/event1 is a keyboard
    [ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event0)
    [ 4792.490] (II) No input driver specified, ignoring this device.
    [ 4792.490] (II) This device may have been added with another device file.
    [ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
    [ 4792.490] (II) No input driver specified, ignoring this device.
    [ 4792.490] (II) This device may have been added with another device file.
    [ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
    [ 4792.490] (II) No input driver specified, ignoring this device.
    [ 4792.490] (II) This device may have been added with another device file.
    [ 4792.491] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
    [ 4792.491] (II) No input driver specified, ignoring this device.
    [ 4792.491] (II) This device may have been added with another device file.
    [ 4792.491] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event3)
    [ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
    [ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
    [ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
    [ 4792.491] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
    [ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
    [ 4792.491] (**) Option "Device" "/dev/input/event3"
    [ 4792.491] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is tagged by udev as: Keyboard
    [ 4792.491] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is a keyboard
    [ 4792.554] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:07B2.0004/input/input24/event3"
    [ 4792.554] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 8)
    [ 4792.554] (**) Option "xkb_model" "pc104"
    [ 4792.554] (**) Option "xkb_layout" "us,ru"
    [ 4792.554] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
    [ 4792.554] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is tagged by udev as: Keyboard
    [ 4792.554] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is a keyboard
    [ 4792.555] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event4)
    [ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev pointer catchall"
    [ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput pointer catchall"
    [ 4792.555] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
    [ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
    [ 4792.555] (**) Option "Device" "/dev/input/event4"
    [ 4792.555] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is tagged by udev as: Mouse
    [ 4792.555] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is a pointer caps
    [ 4792.609] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:07B2.0005/input/input25/event4"
    [ 4792.610] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: MOUSE, id 9)
    [ 4792.610] (**) Option "AccelerationScheme" "none"
    [ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) selected scheme none/0
    [ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
    [ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
    [ 4792.610] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is tagged by udev as: Mouse
    [ 4792.610] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is a pointer caps
    [ 4792.610] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/mouse0)
    [ 4792.610] (II) No input driver specified, ignoring this device.
    [ 4792.610] (II) This device may have been added with another device file.
    [ 4792.611] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event5)
    [ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
    [ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "joystick catchall"
    [ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
    [ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
    [ 4792.611] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
    [ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
    [ 4792.611] (**) Option "Device" "/dev/input/event5"
    [ 4792.611] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is tagged by udev as: Keyboard Joystick
    [ 4792.611] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is a keyboard
    [ 4792.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:045E:07B2.0006/input/input26/event5"
    [ 4792.676] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 10)
    [ 4792.676] (**) Option "xkb_model" "pc104"
    [ 4792.676] (**) Option "xkb_layout" "us,ru"
    [ 4792.676] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
    [ 4792.676] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is tagged by udev as: Keyboard Joystick
    [ 4792.676] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is a keyboard
    [ 4792.677] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/js0)
    [ 4792.677] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
    [ 4792.677] (II) No input driver specified, ignoring this device.
    [ 4792.677] (II) This device may have been added with another device file.
    [ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
    [ 4792.677] (II) No input driver specified, ignoring this device.
    [ 4792.677] (II) This device may have been added with another device file.
    [ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
    [ 4792.677] (II) No input driver specified, ignoring this device.
    [ 4792.677] (II) This device may have been added with another device file.
    [ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
    [ 4792.677] (II) No input driver specified, ignoring this device.
    [ 4792.677] (II) This device may have been added with another device file.
    [ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
    [ 4792.678] (II) No input driver specified, ignoring this device.
    [ 4792.678] (II) This device may have been added with another device file.
    [ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
    [ 4792.678] (II) No input driver specified, ignoring this device.
    [ 4792.678] (II) This device may have been added with another device file.
    [ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event12)
    [ 4792.678] (II) No input driver specified, ignoring this device.
    [ 4792.678] (II) This device may have been added with another device file.
    [ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
    [ 4792.678] (II) No input driver specified, ignoring this device.
    [ 4792.678] (II) This device may have been added with another device file.
    [ 4792.678] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
    [ 4792.678] (II) No input driver specified, ignoring this device.
    [ 4792.678] (II) This device may have been added with another device file.
    [ 4792.679] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
    [ 4792.679] (II) No input driver specified, ignoring this device.
    [ 4792.679] (II) This device may have been added with another device file.
    [ 4792.679] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
    [ 4792.679] (II) No input driver specified, ignoring this device.
    [ 4792.679] (II) This device may have been added with another device file.
    [ 4792.679] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event16)
    [ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
    [ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
    [ 4792.679] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
    [ 4792.679] (**) Eee PC WMI hotkeys: always reports core events
    [ 4792.679] (**) Option "Device" "/dev/input/event16"
    [ 4792.679] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard
    [ 4792.679] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is a keyboard
    [ 4792.712] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input19/event16"
    [ 4792.712] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
    [ 4792.712] (**) Option "xkb_model" "pc104"
    [ 4792.713] (**) Option "xkb_layout" "us,ru"
    [ 4792.713] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
    [ 4792.713] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard
    [ 4792.713] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is a keyboard
    [ 4793.050] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4793.050] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
    [ 4793.050] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4793.081] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4793.081] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
    [ 4793.081] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.081] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.081] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.081] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    [ 4793.129] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4793.129] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
    [ 4793.129] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4793.160] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4793.160] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
    [ 4793.160] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.160] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.160] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.160] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    [ 4793.229] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4793.229] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
    [ 4793.229] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4793.259] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4793.259] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
    [ 4793.259] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.259] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.259] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4793.259] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    [ 4849.763] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4849.763] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
    [ 4849.763] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4849.794] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4849.794] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
    [ 4849.794] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4849.794] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4849.794] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 4849.794] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4849.794] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4849.794] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 4849.795] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4849.795] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 4849.795] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4849.795] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4849.795] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 4849.795] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4849.795] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 4849.795] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4849.795] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4849.795] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    I also tried other configs, but neither of them made me happy:
    Section "DRI"
    Mode 0666
    EndSection
    Section "Monitor"
    Identifier "SAM"
    ModelName "Samsung SMS27A850"
    HorizSync 30.0 - 90.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    DisplaySize 597 336 # In millimeters
    EndSection
    Section "Monitor"
    Identifier "VS"
    ModelName "ViewSonic VG1930wm"
    Option "DPMS"
    Option "RightOf" "SAM"
    Option "Rotate" "left"
    EndSection
    Section "Monitor"
    Identifier "BNQ"
    ModelName "BenQ FP737s"
    Option "DPMS"
    Option "LeftOf" "SAM"
    Option "Rotate" "left"
    EndSection
    Section "Device"
    Identifier "nvidia-sam"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 560 Ti"
    BusID "01:00:0"
    Option "Monitor-DVI-I-1" "SAM"
    Screen 0
    EndSection
    Section "Device"
    Identifier "nvidia-vs"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 560 Ti"
    BusID "01:00:0"
    Option "Monitor-DVI-I-2" "VS"
    Screen 1
    EndSection
    Section "Device"
    Identifier "intel"
    Driver "modesetting"
    Option "AccelMethod" "none"
    VendorName "Intel"
    BoardName "Intel Integrated Graphic Controller"
    BusID "00:02:0"
    Option "Monitor-VGA-0" "BNQ"
    Screen 2
    EndSection
    Section "Screen"
    Identifier "SAM-Screen"
    Device "nvidia-sam"
    Monitor "SAM"
    #DefaultDepth 24
    # Option "Stereo" "0"
    # Option "SLI" "Off"
    # Option "MultiGPU" "Off"
    # Option "BaseMosaic" "off"
    #Option "AllowEmptyInitialConfiguration"
    # SubSection "Display"
    # Depth 24
    # EndSubSection
    EndSection
    Section "Screen"
    Identifier "VS-Screen"
    Device "nvidia-vs"
    Monitor "VS"
    #DefaultDepth 24
    # Option "Stereo" "0"
    # Option "SLI" "Off"
    # Option "MultiGPU" "Off"
    # Option "BaseMosaic" "off"
    #Option "AllowEmptyInitialConfiguration"
    # SubSection "Display"
    # Depth 24
    # EndSubSection
    EndSection
    Section "Screen"
    Identifier "BNQ-Screen"
    Device "intel"
    Monitor "BNQ"
    EndSection
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "SAM-Screen"
    Screen 1 "VS-Screen" RightOf "SAM-Screen"
    Screen 2 "BNQ-Screen" LeftOf "SAM-Screen"
    Option "Xinerama" "0"
    EndSection
    [ 4488.527]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 4488.527] X Protocol Version 11, Revision 0
    [ 4488.527] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 4488.527] Current Operating System: Linux earth 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
    [ 4488.527] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dc49b07c-e67c-4b6f-91f7-7c1adc050e21 rw quiet ipv6.disable=1 init=/usr/lib/systemd/systemd security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd
    [ 4488.527] Build Date: 22 February 2015 12:50:32PM
    [ 4488.527]
    [ 4488.527] Current version of pixman: 0.32.6
    [ 4488.527] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4488.527] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4488.527] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:38:54 2015
    [ 4488.527] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4488.527] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 4488.528] (==) ServerLayout "Layout0"
    [ 4488.528] (**) |-->Screen "SAM-Screen" (0)
    [ 4488.528] (**) | |-->Monitor "SAM"
    [ 4488.528] (**) | |-->Device "nvidia-sam"
    [ 4488.528] (**) |-->Screen "VS-Screen" (1)
    [ 4488.528] (**) | |-->Monitor "VS"
    [ 4488.528] (**) | |-->Device "nvidia-vs"
    [ 4488.528] (**) |-->Screen "BNQ-Screen" (2)
    [ 4488.528] (**) | |-->Monitor "BNQ"
    [ 4488.528] (**) | |-->Device "intel"
    [ 4488.528] (**) Option "Xinerama" "0"
    [ 4488.528] (==) Automatically adding devices
    [ 4488.528] (==) Automatically enabling devices
    [ 4488.528] (==) Automatically adding GPU devices
    [ 4488.528] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 4488.528] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 4488.528] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 4488.528] (II) Loader magic: 0x815d80
    [ 4488.528] (II) Module ABI versions:
    [ 4488.528] X.Org ANSI C Emulation: 0.4
    [ 4488.528] X.Org Video Driver: 19.0
    [ 4488.528] X.Org XInput driver : 21.0
    [ 4488.528] X.Org Server Extension : 9.0
    [ 4488.529] (EE) systemd-logind: failed to get session: PID 32224 does not belong to any known session
    [ 4488.530] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 4488.530] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 4488.531] (--) PCI: (0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 4488.531] (--) PCI:*(0:1:0:0) 10de:1200:10b0:0401 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 4488.531] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 4488.531] (II) LoadModule: "glx"
    [ 4488.531] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 4488.542] (II) Module glx: vendor="NVIDIA Corporation"
    [ 4488.542] compiled for 4.0.2, module version = 1.0.0
    [ 4488.542] Module class: X.Org Server Extension
    [ 4488.542] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
    [ 4488.542] (II) LoadModule: "nvidia"
    [ 4488.542] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 4488.543] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 4488.543] compiled for 4.0.2, module version = 1.0.0
    [ 4488.543] Module class: X.Org Video Driver
    [ 4488.543] (II) LoadModule: "modesetting"
    [ 4488.543] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 4488.543] (II) Module modesetting: vendor="X.Org Foundation"
    [ 4488.543] compiled for 1.17.1, module version = 1.17.1
    [ 4488.543] Module class: X.Org Video Driver
    [ 4488.543] ABI class: X.Org Video Driver, version 19.0
    [ 4488.543] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
    [ 4488.543] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 4488.543] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 4488.543] (++) using VT number 7
    [ 4488.645] (II) Loading sub module "fb"
    [ 4488.645] (II) LoadModule: "fb"
    [ 4488.645] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 4488.645] (II) Module fb: vendor="X.Org Foundation"
    [ 4488.646] compiled for 1.17.1, module version = 1.0.0
    [ 4488.646] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4488.646] (II) Loading sub module "wfb"
    [ 4488.646] (II) LoadModule: "wfb"
    [ 4488.646] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 4488.646] (II) Module wfb: vendor="X.Org Foundation"
    [ 4488.646] compiled for 1.17.1, module version = 1.0.0
    [ 4488.646] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4488.646] (II) Loading sub module "ramdac"
    [ 4488.646] (II) LoadModule: "ramdac"
    [ 4488.646] (II) Module "ramdac" already built-in
    [ 4488.647] (II) modeset(2): using drv /dev/dri/card0
    [ 4488.647] (II) modeset(G0): using drv /dev/dri/card0
    [ 4488.647] (EE) Screen 2 deleted because of no matching config section.
    [ 4488.647] (II) UnloadModule: "modesetting"
    [ 4488.647] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "SAM-Screen" for depth/fbbpp 24/32
    [ 4488.647] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 4488.647] (==) NVIDIA(0): RGB weight 888
    [ 4488.647] (==) NVIDIA(0): Default visual is TrueColor
    [ 4488.647] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 4488.648] (II) NVIDIA(1): Creating default Display subsection in Screen section
    "VS-Screen" for depth/fbbpp 24/32
    [ 4488.648] (**) NVIDIA(0): Enabling 2D acceleration
    [ 4489.049] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
    [ 4489.050] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
    [ 4489.050] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 4489.050] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
    [ 4489.050] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 4489.082] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
    [ 4489.082] (--) NVIDIA(0): CRT-0
    [ 4489.082] (--) NVIDIA(0): CRT-1
    [ 4489.082] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0) (boot, connected)
    [ 4489.082] (--) NVIDIA(0): DFP-1
    [ 4489.082] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2) (connected)
    [ 4489.082] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 4489.082] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
    [ 4489.082] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0): Internal TMDS
    [ 4489.082] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
    [ 4489.082] (--) NVIDIA(0): DFP-1: Internal TMDS
    [ 4489.082] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [ 4489.082] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2): Internal TMDS
    [ 4489.082] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
    [ 4489.083] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4489.083] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
    [ 4489.083] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4489.083] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4489.083] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
    [ 4489.083] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    [ 4489.084] (==) NVIDIA(0):
    [ 4489.084] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 4489.084] (==) NVIDIA(0): will be used as the requested mode.
    [ 4489.084] (==) NVIDIA(0):
    [ 4489.084] (II) NVIDIA(0): Validated MetaModes:
    [ 4489.084] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
    [ 4489.084] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
    [ 4489.113] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
    [ 4489.113] (--) NVIDIA(0): option
    [ 4489.114] (==) NVIDIA(1): Depth 24, (==) framebuffer bpp 32
    [ 4489.114] (==) NVIDIA(1): RGB weight 888
    [ 4489.114] (==) NVIDIA(1): Default visual is TrueColor
    [ 4489.114] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
    [ 4489.114] (II) NVIDIA(1): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
    [ 4489.114] (--) NVIDIA(1): Memory: 1048576 kBytes
    [ 4489.114] (--) NVIDIA(1): VideoBIOS: 70.24.21.00.00
    [ 4489.114] (II) NVIDIA(1): Detected PCI Express Link width: 16X
    [ 4489.146] (--) NVIDIA(1): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
    [ 4489.146] (--) NVIDIA(1): CRT-0
    [ 4489.146] (--) NVIDIA(1): CRT-1
    [ 4489.146] (--) NVIDIA(1): Samsung SMS27A850 (DFP-0) (boot, connected)
    [ 4489.146] (--) NVIDIA(1): DFP-1
    [ 4489.146] (--) NVIDIA(1): ViewSonic VG1930wm (DFP-2) (connected)
    [ 4489.146] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 4489.146] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
    [ 4489.146] (--) NVIDIA(1): Samsung SMS27A850 (DFP-0): Internal TMDS
    [ 4489.146] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
    [ 4489.146] (--) NVIDIA(1): DFP-1: Internal TMDS
    [ 4489.146] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [ 4489.146] (--) NVIDIA(1): ViewSonic VG1930wm (DFP-2): Internal TMDS
    [ 4489.146] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
    [ 4489.146] (**) NVIDIA(1): Option "Rotate" "left"
    [ 4489.146] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4489.146] (**) NVIDIA(1): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
    [ 4489.146] (**) NVIDIA(1): has been enabled on all display devices.)
    [ 4489.147] (==) NVIDIA(1):
    [ 4489.147] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
    [ 4489.147] (==) NVIDIA(1): will be used as the requested mode.
    [ 4489.147] (==) NVIDIA(1):
    [ 4489.147] (II) NVIDIA(1): Validated MetaModes:
    [ 4489.147] (II) NVIDIA(1): "DFP-2:nvidia-auto-select{Rotation=90}"
    [ 4489.147] (II) NVIDIA(1): Virtual screen size determined to be 900 x 1440
    [ 4489.150] (--) NVIDIA(1): DPI set to (55, 140); computed from "UseEdidDpi" X config
    [ 4489.150] (--) NVIDIA(1): option
    [ 4489.150] (EE)
    [ 4489.150] (EE) Backtrace:
    [ 4489.151] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
    [ 4489.151] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7f64dd88653f]
    [ 4489.151] (EE) 2: /usr/lib/xorg-server/Xorg (xf86nameCompare+0x19) [0x4a9159]
    [ 4489.151] (EE) 3: /usr/lib/xorg-server/Xorg (xf86findOption+0x2c) [0x4a2c6c]
    [ 4489.151] (EE) 4: /usr/lib/xorg-server/Xorg (xf86SetDepthBpp+0x430) [0x4828d0]
    [ 4489.151] (EE) 5: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x25e1) [0x7f64d695aab1]
    [ 4489.151] (EE) 6: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
    [ 4489.151] (EE) 7: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
    [ 4489.152] (EE) 8: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f64dd873800]
    [ 4489.152] (EE) 9: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
    [ 4489.152] (EE) 10: ? (?+0x29) [0x29]
    [ 4489.152] (EE)
    [ 4489.152] (EE) Segmentation fault at address 0x231
    [ 4489.152] (EE)
    Fatal server error:
    [ 4489.152] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 4489.152] (EE)
    [ 4489.152] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 4489.152] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 4489.152] (EE)
    [ 4489.295] (EE) Server terminated with error (1). Closing log file.
    Section "DRI"
    Mode 0666
    EndSection
    Section "Monitor"
    Identifier "SAM"
    ModelName "Samsung SMS27A850"
    HorizSync 30.0 - 90.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    DisplaySize 597 336 # In millimeters
    EndSection
    Section "Monitor"
    Identifier "VS"
    ModelName "ViewSonic VG1930wm"
    Option "DPMS"
    Option "RightOf" "SAM"
    Option "Rotate" "left"
    EndSection
    Section "Monitor"
    Identifier "BNQ"
    ModelName "BenQ FP737s"
    Option "DPMS"
    Option "LeftOf" "SAM"
    Option "Rotate" "left"
    EndSection
    Section "Device"
    Identifier "nvidia-sam"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 560 Ti"
    BusID "01:00:0"
    Option "Monitor-DVI-I-1" "SAM"
    Screen 0
    EndSection
    Section "Device"
    Identifier "nvidia-vs"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GTX 560 Ti"
    BusID "01:00:0"
    Option "Monitor-DVI-I-2" "VS"
    Screen 1
    EndSection
    Section "Device"
    Identifier "intel"
    Driver "intel"
    Option "AccelMethod" "none"
    VendorName "Intel"
    BoardName "Intel Integrated Graphic Controller"
    BusID "00:02:0"
    Option "Monitor-VGA-0" "BNQ"
    Screen 2
    EndSection
    Section "Screen"
    Identifier "SAM-Screen"
    Device "nvidia-sam"
    Monitor "SAM"
    #DefaultDepth 24
    # Option "Stereo" "0"
    # Option "SLI" "Off"
    # Option "MultiGPU" "Off"
    # Option "BaseMosaic" "off"
    #Option "AllowEmptyInitialConfiguration"
    # SubSection "Display"
    # Depth 24
    # EndSubSection
    EndSection
    Section "Screen"
    Identifier "VS-Screen"
    Device "nvidia-vs"
    Monitor "VS"
    #DefaultDepth 24
    # Option "Stereo" "0"
    # Option "SLI" "Off"
    # Option "MultiGPU" "Off"
    # Option "BaseMosaic" "off"
    #Option "AllowEmptyInitialConfiguration"
    # SubSection "Display"
    # Depth 24
    # EndSubSection
    EndSection
    Section "Screen"
    Identifier "BNQ-Screen"
    Device "intel"
    Monitor "BNQ"
    EndSection
    Section

    Hi:
    There is a specific order you need to install the graphics drivers for the notebooks with the nvidia/intel graphics.
    1. Install the Intel chipset installation utility and reboot.  If the one on your notebook's support page doesn't work, use this one.
    https://downloadcenter.intel.com/Detail_Desc.aspx?​DwnldID=20775&lang=eng&ProdId=816
    2. Install the Intel HD graphics driver and reboot.  If the one on your notebook's suport page doesn't work, try this one.
    https://downloadcenter.intel.com/Detail_Desc.aspx?​DwnldID=24348
    3. Install the nVidia HD graphics driver and reboot.  If the one on your notebook's support page doesn't work, try this one.
    http://www.nvidia.com/download/driverResults.aspx/​81879/en-us

  • Xorg + KVM switch = Flickering and artifacts

    Dear all,
    I recently bought two small kvm switches produced by Digitus.
    They are working fine when I use my Windows box but sadly it's another story with my Arch laptop. When I don't use the KVM switches my two displays a rendered fine. However when I plug the KVM switches I get some kind of flickering red/green/blue lines/pixels on the display, It's a bit tricky to describe so here is a photo (Here it is some green dot, but that might vary) :
    As you might think, I am trying to get rid of those artifacts.
    A couple of information regarding my setup :
    KVM switches
    Monitor
    On my laptop the graphic adapter is an intel hd 4000
    dna@DNA-NOTEBOOK ~ % sudo lspci -vvv | grep -A 20 "00:02.0"
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
    Subsystem: Hewlett-Packard Company Device 1815
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 45
    Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at 2000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee00018 Data: 0000
    Capabilities: [d0] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [a4] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: i915
    My intel driver configuration (I have already tested with some other options as you might see. I'm not a graphical guru so please bear with me if those options are irellevant):
    Note that I don't have any xorg.conf nor a configuration files for the monitors.
    dna@DNA-NOTEBOOK ~ % cat /etc/X11/xorg.conf.d/20-intel.conf
    Section "Device"
    Identifier "Intel Graphics"
    Driver "intel"
    Option "AccelMethod" "sna"
    # Option "TearFree" "true"
    # Option "DRI" "false"
    # Option "AccelMethod" "uxa"
    EndSection
    xrandr query (HDMI1 is using the KVM switch and HDMI2 is not, they are using the exact same mode)
    dna@DNA-NOTEBOOK ~ % xrandr -q
    Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 32767 x 32767
    LVDS1 connected 1366x768+1920+0 (normal left inverted right x axis y axis) 256mm x 144mm
    1366x768 60.0*+ 40.0
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 disconnected (normal left inverted right x axis y axis)
    HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
    1920x1080 60.0*+
    1680x1050 59.9
    1680x945 60.0
    1400x1050 74.9 59.9
    1600x900 60.0
    1280x1024 75.0 60.0
    1440x900 75.0 59.9
    1280x960 60.0
    1366x768 60.0
    1360x768 60.0
    1280x800 74.9 59.9
    1152x864 75.0
    1280x768 74.9 60.0
    1024x768 75.0 70.1 60.0
    1024x576 60.0
    800x600 72.2 75.0 60.3 56.2
    848x480 60.0
    640x480 75.0 72.8 66.7 60.0
    720x400 70.1
    DP1 disconnected (normal left inverted right x axis y axis)
    HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
    1920x1080 60.0*+
    1680x1050 59.9
    1680x945 60.0
    1400x1050 74.9 59.9
    1600x900 60.0
    1280x1024 75.0 60.0
    1440x900 75.0 59.9
    1280x960 60.0
    1366x768 60.0
    1360x768 60.0
    1280x800 74.9 59.9
    1152x864 75.0
    1280x768 74.9 60.0
    1024x768 75.0 70.1 60.0
    1024x576 60.0
    800x600 72.2 75.0 60.3 56.2
    848x480 60.0
    640x480 75.0 72.8 66.7 60.0
    720x400 70.1
    HDMI3 disconnected (normal left inverted right x axis y axis)
    DP2 disconnected (normal left inverted right x axis y axis)
    DP3 disconnected (normal left inverted right x axis y axis)
    My Xorg log
    [ 12802.582]
    X.Org X Server 1.13.3
    Release Date: 2013-03-07
    [ 12802.582] X Protocol Version 11, Revision 0
    [ 12802.582] Build Operating System: Linux 3.8.2-1-ARCH x86_64
    [ 12802.582] Current Operating System: Linux DNA-NOTEBOOK 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013 x86_64
    [ 12802.582] Kernel command line: root=/dev/sda2 ro elevator=noop initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 12802.582] Build Date: 09 March 2013 08:45:37AM
    [ 12802.582]
    [ 12802.582] Current version of pixman: 0.28.2
    [ 12802.583] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 12802.583] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 12802.583] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 11 10:58:50 2013
    [ 12802.583] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 12802.583] (==) No Layout section. Using the first Screen section.
    [ 12802.583] (==) No screen section available. Using defaults.
    [ 12802.583] (**) |-->Screen "Default Screen Section" (0)
    [ 12802.583] (**) | |-->Monitor "<default monitor>"
    [ 12802.583] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 12802.583] (**) | |-->Device "Intel Graphics"
    [ 12802.583] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 12802.583] (==) Automatically adding devices
    [ 12802.583] (==) Automatically enabling devices
    [ 12802.583] (==) Automatically adding GPU devices
    [ 12802.583] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 12802.583] Entry deleted from font path.
    [ 12802.583] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 12802.583] Entry deleted from font path.
    [ 12802.583] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 12802.583] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 12802.583] Entry deleted from font path.
    [ 12802.583] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 12802.583] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 12802.583] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 12802.583] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 12802.583] (II) Loader magic: 0x7fcc20
    [ 12802.583] (II) Module ABI versions:
    [ 12802.583] X.Org ANSI C Emulation: 0.4
    [ 12802.583] X.Org Video Driver: 13.1
    [ 12802.583] X.Org XInput driver : 18.0
    [ 12802.583] X.Org Server Extension : 7.0
    [ 12802.583] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 12802.584] (--) PCI:*(0:0:2:0) 8086:0166:103c:1815 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00002000/64
    [ 12802.584] Initializing built-in extension Generic Event Extension
    [ 12802.584] Initializing built-in extension SHAPE
    [ 12802.584] Initializing built-in extension MIT-SHM
    [ 12802.585] Initializing built-in extension XInputExtension
    [ 12802.585] Initializing built-in extension XTEST
    [ 12802.585] Initializing built-in extension BIG-REQUESTS
    [ 12802.585] Initializing built-in extension SYNC
    [ 12802.585] Initializing built-in extension XKEYBOARD
    [ 12802.585] Initializing built-in extension XC-MISC
    [ 12802.585] Initializing built-in extension SECURITY
    [ 12802.585] Initializing built-in extension XINERAMA
    [ 12802.585] Initializing built-in extension XFIXES
    [ 12802.585] Initializing built-in extension RENDER
    [ 12802.585] Initializing built-in extension RANDR
    [ 12802.585] Initializing built-in extension COMPOSITE
    [ 12802.585] Initializing built-in extension DAMAGE
    [ 12802.585] Initializing built-in extension MIT-SCREEN-SAVER
    [ 12802.585] Initializing built-in extension DOUBLE-BUFFER
    [ 12802.585] Initializing built-in extension RECORD
    [ 12802.585] Initializing built-in extension DPMS
    [ 12802.585] Initializing built-in extension X-Resource
    [ 12802.585] Initializing built-in extension XVideo
    [ 12802.585] Initializing built-in extension XVideo-MotionCompensation
    [ 12802.585] Initializing built-in extension XFree86-VidModeExtension
    [ 12802.586] Initializing built-in extension XFree86-DGA
    [ 12802.586] Initializing built-in extension XFree86-DRI
    [ 12802.587] Initializing built-in extension DRI2
    [ 12802.587] (II) LoadModule: "glx"
    [ 12802.587] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 12802.587] (II) Module glx: vendor="X.Org Foundation"
    [ 12802.587] compiled for 1.13.3, module version = 1.0.0
    [ 12802.587] ABI class: X.Org Server Extension, version 7.0
    [ 12802.587] (==) AIGLX enabled
    [ 12802.588] Loading extension GLX
    [ 12802.588] (II) LoadModule: "intel"
    [ 12802.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 12802.588] (II) Module intel: vendor="X.Org Foundation"
    [ 12802.588] compiled for 1.13.2.901, module version = 2.21.3
    [ 12802.588] Module class: X.Org Video Driver
    [ 12802.588] ABI class: X.Org Video Driver, version 13.1
    [ 12802.588] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 12802.589] (++) using VT number 1
    [ 12802.589] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 12802.589] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 12802.589] (==) intel(0): RGB weight 888
    [ 12802.589] (==) intel(0): Default visual is TrueColor
    [ 12802.589] (**) intel(0): Option "AccelMethod" "sna"
    [ 12802.589] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 12802.589] (**) intel(0): Framebuffer tiled
    [ 12802.589] (**) intel(0): Pixmaps tiled
    [ 12802.589] (**) intel(0): "Tear free" disabled
    [ 12802.589] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 12802.589] (II) intel(0): Output LVDS1 has no monitor section
    [ 12802.589] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 12802.602] (II) intel(0): Output VGA1 has no monitor section
    [ 12802.603] (II) intel(0): Output HDMI1 has no monitor section
    [ 12802.645] (II) intel(0): Output DP1 has no monitor section
    [ 12802.898] (II) intel(0): Output HDMI2 has no monitor section
    [ 12802.912] (II) intel(0): Output HDMI3 has no monitor section
    [ 12802.952] (II) intel(0): Output DP2 has no monitor section
    [ 12802.992] (II) intel(0): Output DP3 has no monitor section
    [ 12802.992] (II) intel(0): EDID for output LVDS1
    [ 12802.992] (II) intel(0): Manufacturer: SEC Model: 3953 Serial#: 0
    [ 12802.992] (II) intel(0): Year: 2012 Week: 0
    [ 12802.992] (II) intel(0): EDID Version: 1.4
    [ 12802.992] (II) intel(0): Digital Display Input
    [ 12802.992] (II) intel(0): 6 bits per channel
    [ 12802.992] (II) intel(0): Digital interface is undefined
    [ 12802.992] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 14
    [ 12802.992] (II) intel(0): Gamma: 2.20
    [ 12802.992] (II) intel(0): No DPMS capabilities specified
    [ 12802.992] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 12802.992] (II) intel(0): First detailed timing is preferred mode
    [ 12802.992] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 12802.992] (II) intel(0): redX: 0.576 redY: 0.349 greenX: 0.336 greenY: 0.556
    [ 12802.992] (II) intel(0): blueX: 0.159 blueY: 0.115 whiteX: 0.313 whiteY: 0.329
    [ 12802.992] (II) intel(0): Manufacturer's mask: 0
    [ 12802.992] (II) intel(0): Supported detailed timing:
    [ 12802.992] (II) intel(0): clock: 76.9 MHz Image Size: 256 x 144 mm
    [ 12802.992] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
    [ 12802.992] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
    [ 12802.992] (II) intel(0): Supported detailed timing:
    [ 12802.992] (II) intel(0): clock: 51.3 MHz Image Size: 256 x 144 mm
    [ 12802.992] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
    [ 12802.992] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
    [ 12802.992] (II) intel(0): Unknown vendor-specific block 2
    [ 12802.992] (II) intel(0): EDID (in hex):
    [ 12802.992] (II) intel(0): 00ffffffffffff004ca3533900000000
    [ 12802.992] (II) intel(0): 00160104901a0e780a91e59359568e28
    [ 12802.992] (II) intel(0): 1d505400000001010101010101010101
    [ 12802.992] (II) intel(0): 0101010101010e1e561651000c303020
    [ 12802.992] (II) intel(0): 25000090100000190914561651000c30
    [ 12802.992] (II) intel(0): 30202500009010000019000000000000
    [ 12802.992] (II) intel(0): 00000000000000000000000000000002
    [ 12802.992] (II) intel(0): 000c4cff0a3c64100f196400000000c1
    [ 12802.992] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 12802.992] (II) intel(0): Printing probed modes for output LVDS1
    [ 12802.992] (II) intel(0): Modeline "1366x768"x60.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12802.992] (II) intel(0): Modeline "1366x768"x40.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12802.992] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 12802.992] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 12802.992] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 12802.992] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 12803.005] (II) intel(0): EDID for output VGA1
    [ 12803.006] (II) intel(0): EDID for output HDMI1
    [ 12803.048] (II) intel(0): EDID for output DP1
    [ 12803.302] (II) intel(0): EDID for output HDMI2
    [ 12803.302] (II) intel(0): Manufacturer: ACR Model: 198 Serial#: 294659115
    [ 12803.302] (II) intel(0): Year: 2011 Week: 19
    [ 12803.302] (II) intel(0): EDID Version: 1.3
    [ 12803.302] (II) intel(0): Digital Display Input
    [ 12803.302] (II) intel(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 12803.302] (II) intel(0): Gamma: 2.20
    [ 12803.302] (II) intel(0): DPMS capabilities: Off
    [ 12803.302] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 12803.302] (II) intel(0): First detailed timing is preferred mode
    [ 12803.302] (II) intel(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
    [ 12803.302] (II) intel(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
    [ 12803.302] (II) intel(0): Supported established timings:
    [ 12803.302] (II) intel(0): 720x400@70Hz
    [ 12803.302] (II) intel(0): 640x480@60Hz
    [ 12803.302] (II) intel(0): 640x480@67Hz
    [ 12803.302] (II) intel(0): 800x600@56Hz
    [ 12803.302] (II) intel(0): 800x600@60Hz
    [ 12803.302] (II) intel(0): 1024x768@60Hz
    [ 12803.302] (II) intel(0): 1024x768@70Hz
    [ 12803.302] (II) intel(0): Manufacturer's mask: 0
    [ 12803.302] (II) intel(0): Supported standard timings:
    [ 12803.302] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 12803.302] (II) intel(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 12803.302] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 12803.302] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 12803.302] (II) intel(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 12803.302] (II) intel(0): Supported detailed timing:
    [ 12803.302] (II) intel(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [ 12803.302] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 12803.302] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 12803.302] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 12803.302] (II) intel(0): Monitor name: Acer P226HQL
    [ 12803.302] (II) intel(0): Serial No: LNJ0W0014320
    [ 12803.302] (II) intel(0): EDID (in hex):
    [ 12803.302] (II) intel(0): 00ffffffffffff00047298012b249011
    [ 12803.302] (II) intel(0): 1315010380301b782a9535a159579f27
    [ 12803.302] (II) intel(0): 0e5054b30c00714f810081809500d1c0
    [ 12803.302] (II) intel(0): 010101010101023a801871382d40582c
    [ 12803.302] (II) intel(0): 4500dd0c1100001e000000fd00384b1e
    [ 12803.302] (II) intel(0): 5311000a202020202020000000fc0041
    [ 12803.302] (II) intel(0): 636572205032323648514c0a000000ff
    [ 12803.302] (II) intel(0): 004c4e4a3057303031343332300a00d9
    [ 12803.302] (II) intel(0): Printing probed modes for output HDMI2
    [ 12803.302] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 12803.302] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 12803.302] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 12803.302] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
    [ 12803.302] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 12803.302] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 12803.302] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 12803.302] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 12803.302] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 12803.302] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 12803.302] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 12803.302] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 12803.302] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 12803.302] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 12803.302] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 12803.302] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 12803.315] (II) intel(0): EDID for output HDMI3
    [ 12803.355] (II) intel(0): EDID for output DP2
    [ 12803.395] (II) intel(0): EDID for output DP3
    [ 12803.395] (II) intel(0): Output LVDS1 connected
    [ 12803.395] (II) intel(0): Output VGA1 disconnected
    [ 12803.395] (II) intel(0): Output HDMI1 disconnected
    [ 12803.395] (II) intel(0): Output DP1 disconnected
    [ 12803.395] (II) intel(0): Output HDMI2 connected
    [ 12803.395] (II) intel(0): Output HDMI3 disconnected
    [ 12803.395] (II) intel(0): Output DP2 disconnected
    [ 12803.395] (II) intel(0): Output DP3 disconnected
    [ 12803.395] (II) intel(0): Using exact sizes for initial modes
    [ 12803.395] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 12803.395] (II) intel(0): Output HDMI2 using initial mode 1366x768
    [ 12803.395] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 12803.395] (==) intel(0): DPI set to (96, 96)
    [ 12803.395] (II) Loading sub module "dri2"
    [ 12803.395] (II) LoadModule: "dri2"
    [ 12803.395] (II) Module "dri2" already built-in
    [ 12803.395] (==) Depth 24 pixmap format is 32 bpp
    [ 12803.395] (II) intel(0): SNA initialized with IvyBridge backend
    [ 12803.395] (==) intel(0): Backing store disabled
    [ 12803.395] (==) intel(0): Silken mouse enabled
    [ 12803.395] (II) intel(0): HW Cursor enabled
    [ 12803.395] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 12803.396] (==) intel(0): DPMS enabled
    [ 12803.396] (II) intel(0): [DRI2] Setup complete
    [ 12803.396] (II) intel(0): [DRI2] DRI driver: i965
    [ 12803.396] (II) intel(0): direct rendering: DRI2 Enabled
    [ 12803.397] (==) intel(0): hotplug detection: "enabled"
    [ 12803.397] (--) RandR disabled
    [ 12803.406] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 12803.406] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 12803.406] (II) AIGLX: enabled GLX_ARB_create_context
    [ 12803.406] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 12803.406] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 12803.406] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 12803.406] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 12803.406] (II) AIGLX: Loaded and initialized i965
    [ 12803.406] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 12803.406] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 12803.465] (II) intel(0): switch to mode 1366x768 on crtc 5 (pipe 1)
    [ 12803.645] (II) intel(0): Setting screen physical size to 361 x 203
    [ 12803.676] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 12803.676] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 12803.676] (II) LoadModule: "evdev"
    [ 12803.676] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 12803.676] (II) Module evdev: vendor="X.Org Foundation"
    [ 12803.676] compiled for 1.13.0, module version = 2.7.3
    [ 12803.676] Module class: X.Org XInput Driver
    [ 12803.676] ABI class: X.Org XInput driver, version 18.0
    [ 12803.676] (II) Using input driver 'evdev' for 'Power Button'
    [ 12803.676] (**) Power Button: always reports core events
    [ 12803.676] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 12803.677] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 12803.677] (--) evdev: Power Button: Found keys
    [ 12803.677] (II) evdev: Power Button: Configuring as keyboard
    [ 12803.677] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 12803.677] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 12803.677] (**) Option "xkb_rules" "evdev"
    [ 12803.677] (**) Option "xkb_model" "evdev"
    [ 12803.677] (**) Option "xkb_layout" "us"
    [ 12803.699] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 12803.699] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 12803.699] (II) Using input driver 'evdev' for 'Video Bus'
    [ 12803.699] (**) Video Bus: always reports core events
    [ 12803.699] (**) evdev: Video Bus: Device: "/dev/input/event4"
    [ 12803.699] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 12803.699] (--) evdev: Video Bus: Found keys
    [ 12803.699] (II) evdev: Video Bus: Configuring as keyboard
    [ 12803.699] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
    [ 12803.699] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 12803.699] (**) Option "xkb_rules" "evdev"
    [ 12803.699] (**) Option "xkb_model" "evdev"
    [ 12803.699] (**) Option "xkb_layout" "us"
    [ 12803.699] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 12803.699] (II) No input driver specified, ignoring this device.
    [ 12803.699] (II) This device may have been added with another device file.
    [ 12803.700] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [ 12803.700] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 12803.700] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 12803.700] (**) Sleep Button: always reports core events
    [ 12803.700] (**) evdev: Sleep Button: Device: "/dev/input/event1"
    [ 12803.700] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 12803.700] (--) evdev: Sleep Button: Found keys
    [ 12803.700] (II) evdev: Sleep Button: Configuring as keyboard
    [ 12803.700] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
    [ 12803.700] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 12803.700] (**) Option "xkb_rules" "evdev"
    [ 12803.700] (**) Option "xkb_model" "evdev"
    [ 12803.700] (**) Option "xkb_layout" "us"
    [ 12803.700] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 12803.701] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event21)
    [ 12803.701] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 12803.701] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
    [ 12803.701] (**) Logitech Logitech Illuminated Keyboard: always reports core events
    [ 12803.701] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event21"
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
    [ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
    [ 12803.701] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input24/event21"
    [ 12803.701] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 9)
    [ 12803.701] (**) Option "xkb_rules" "evdev"
    [ 12803.701] (**) Option "xkb_model" "evdev"
    [ 12803.701] (**) Option "xkb_layout" "us"
    [ 12803.701] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event22)
    [ 12803.701] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 12803.701] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
    [ 12803.701] (**) Logitech Logitech Illuminated Keyboard: always reports core events
    [ 12803.701] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event22"
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
    [ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
    [ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
    [ 12803.701] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
    [ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
    [ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
    [ 12803.701] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
    [ 12803.701] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
    [ 12803.701] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 12803.701] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input25/event22"
    [ 12803.701] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 10)
    [ 12803.701] (**) Option "xkb_rules" "evdev"
    [ 12803.701] (**) Option "xkb_model" "evdev"
    [ 12803.701] (**) Option "xkb_layout" "us"
    [ 12803.702] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
    [ 12803.702] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
    [ 12803.702] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
    [ 12803.702] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
    [ 12803.702] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
    [ 12803.702] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
    [ 12803.702] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event7)
    [ 12803.702] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
    [ 12803.702] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
    [ 12803.702] (**) HP HD Webcam [Fixed]: always reports core events
    [ 12803.702] (**) evdev: HP HD Webcam [Fixed]: Device: "/dev/input/event7"
    [ 12803.702] (--) evdev: HP HD Webcam [Fixed]: Vendor 0x4f2 Product 0xb2ef
    [ 12803.702] (--) evdev: HP HD Webcam [Fixed]: Found keys
    [ 12803.702] (II) evdev: HP HD Webcam [Fixed]: Configuring as keyboard
    [ 12803.702] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7/event7"
    [ 12803.702] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD, id 11)
    [ 12803.702] (**) Option "xkb_rules" "evdev"
    [ 12803.702] (**) Option "xkb_model" "evdev"
    [ 12803.702] (**) Option "xkb_layout" "us"
    [ 12803.703] (II) config/udev: Adding input device OCT KVMLite (/dev/input/event19)
    [ 12803.703] (**) OCT KVMLite: Applying InputClass "evdev keyboard catchall"
    [ 12803.703] (II) Using input driver 'evdev' for 'OCT KVMLite'
    [ 12803.703] (**) OCT KVMLite: always reports core events
    [ 12803.703] (**) evdev: OCT KVMLite: Device: "/dev/input/event19"
    [ 12803.703] (--) evdev: OCT KVMLite: Vendor 0xb39 Product 0x3
    [ 12803.703] (--) evdev: OCT KVMLite: Found keys
    [ 12803.703] (II) evdev: OCT KVMLite: Configuring as keyboard
    [ 12803.703] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.1/1-1.4.1.1:1.0/input/input19/event19"
    [ 12803.703] (II) XINPUT: Adding extended input device "OCT KVMLite" (type: KEYBOARD, id 12)
    [ 12803.703] (**) Option "xkb_rules" "evdev"
    [ 12803.703] (**) Option "xkb_model" "evdev"
    [ 12803.703] (**) Option "xkb_layout" "us"
    [ 12803.703] (II) config/udev: Adding input device Saitek Cyborg R.A.T.9 Wireless Mouse (/dev/input/event20)
    [ 12803.703] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: Applying InputClass "evdev pointer catchall"
    [ 12803.703] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: Applying InputClass "R.A.T.9"
    [ 12803.703] (II) Using input driver 'evdev' for 'Saitek Cyborg R.A.T.9 Wireless Mouse'
    [ 12803.703] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: always reports core events
    [ 12803.703] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Device: "/dev/input/event20"
    [ 12803.704] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: ButtonMapping '1 2 3 4 5 0 0 8 9 7 6 12 0 0 0 16 17'
    [ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Vendor 0x6a3 Product 0xcd9
    [ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found 17 mouse buttons
    [ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found scroll wheel(s)
    [ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found relative axes
    [ 12803.704] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found x and y relative axes
    [ 12803.704] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Configuring as mouse
    [ 12803.704] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Adding scrollwheel support
    [ 12803.704] (**) Option "YAxisMapping" "10 11"
    [ 12803.704] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: YAxisMapping: buttons 10 and 11
    [ 12803.704] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 12803.704] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.0/input/input23/event20"
    [ 12803.704] (II) XINPUT: Adding extended input device "Saitek Cyborg R.A.T.9 Wireless Mouse" (type: MOUSE, id 13)
    [ 12803.704] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: initialized for relative axes.
    [ 12803.704] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) keeping acceleration scheme 1
    [ 12803.704] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration profile 0
    [ 12803.704] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration factor: 2.000
    [ 12803.704] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration threshold: 4
    [ 12803.704] (II) config/udev: Adding input device Saitek Cyborg R.A.T.9 Wireless Mouse (/dev/input/mouse2)
    [ 12803.704] (II) No input driver specified, ignoring this device.
    [ 12803.704] (II) This device may have been added with another device file.
    [ 12803.704] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [ 12803.704] (II) No input driver specified, ignoring this device.
    [ 12803.704] (II) This device may have been added with another device file.
    [ 12803.705] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event10)
    [ 12803.705] (II) No input driver specified, ignoring this device.
    [ 12803.705] (II) This device may have been added with another device file.
    [ 12803.705] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
    [ 12803.705] (II) No input driver specified, ignoring this device.
    [ 12803.705] (II) This device may have been added with another device file.
    [ 12803.705] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
    [ 12803.705] (II) No input driver specified, ignoring this device.
    [ 12803.705] (II) This device may have been added with another device file.
    [ 12803.705] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event13)
    [ 12803.705] (II) No input driver specified, ignoring this device.
    [ 12803.705] (II) This device may have been added with another device file.
    [ 12803.705] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
    [ 12803.705] (II) No input driver specified, ignoring this device.
    [ 12803.705] (II) This device may have been added with another device file.
    [ 12803.706] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
    [ 12803.706] (II) No input driver specified, ignoring this device.
    [ 12803.706] (II) This device may have been added with another device file.
    [ 12803.706] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event16)
    [ 12803.706] (II) No input driver specified, ignoring this device.
    [ 12803.706] (II) This device may have been added with another device file.
    [ 12803.706] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 12803.706] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 12803.706] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 12803.706] (**) AT Translated Set 2 keyboard: always reports core events
    [ 12803.706] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 12803.706] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 12803.706] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 12803.706] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 12803.706] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 12803.706] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 12803.706] (**) Option "xkb_rules" "evdev"
    [ 12803.706] (**) Option "xkb_model" "evdev"
    [ 12803.706] (**) Option "xkb_layout" "us"
    [ 12803.707] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event17)
    [ 12803.707] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 12803.707] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 12803.707] (**) PS/2 Generic Mouse: always reports core events
    [ 12803.707] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event17"
    [ 12803.707] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
    [ 12803.707] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
    [ 12803.707] (--) evdev: PS/2 Generic Mouse: Found relative axes
    [ 12803.707] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
    [ 12803.707] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
    [ 12803.707] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 12803.707] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 12803.707] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input17/event17"
    [ 12803.707] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
    [ 12803.707] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
    [ 12803.707] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 12803.707] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 12803.707] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 12803.707] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 12803.707] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
    [ 12803.707] (II) No input driver specified, ignoring this device.
    [ 12803.707] (II) This device may have been added with another device file.
    [ 12803.707] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event18)
    [ 12803.707] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 12803.707] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 12803.707] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 12803.707] (II) LoadModule: "synaptics"
    [ 12803.708] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 12803.708] (II) Module synaptics: vendor="X.Org Foundation"
    [ 12803.708] compiled for 1.13.2, module version = 1.6.3
    [ 12803.708] Module class: X.Org XInput Driver
    [ 12803.708] ABI class: X.Org XInput driver, version 18.0
    [ 12803.708] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 12803.708] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 12803.708] (**) Option "Device" "/dev/input/event18"
    [ 12803.778] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1200 - 5736
    [ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 824 - 5172
    [ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 12803.778] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 12803.778] (**) Option "TapButton1" "1"
    [ 12803.779] (**) Option "TapButton2" "2"
    [ 12803.779] (**) Option "TapButton3" "3"
    [ 12803.779] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 12803.779] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 12803.805] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input18/event18"
    [ 12803.805] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
    [ 12803.805] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 12803.805] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 12803.805] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.032
    [ 12803.805] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 12803.805] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 12803.805] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 12803.805] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 12803.805] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 12803.806] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 12803.806] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 12803.806] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
    [ 12803.806] (II) No input driver specified, ignoring this device.
    [ 12803.806] (II) This device may have been added with another device file.
    [ 12803.806] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 12803.806] (II) No input driver specified, ignoring this device.
    [ 12803.806] (II) This device may have been added with another device file.
    [ 12803.806] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
    [ 12803.806] (II) No input driver specified, ignoring this device.
    [ 12803.806] (II) This device may have been added with another device file.
    [ 12803.807] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
    [ 12803.807] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 12803.807] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 12803.807] (**) HP WMI hotkeys: always reports core events
    [ 12803.807] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
    [ 12803.807] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 12803.807] (--) evdev: HP WMI hotkeys: Found keys
    [ 12803.807] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 12803.807] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 12803.807] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 17)
    [ 12803.807] (**) Option "xkb_rules" "evdev"
    [ 12803.807] (**) Option "xkb_model" "evdev"
    [ 12803.807] (**) Option "xkb_layout" "us"
    [ 12804.127] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 12804.127] (II) intel(0): Printing DDC gathered Modelines:
    [ 12804.127] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12804.127] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12832.404] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 12832.404] (II) intel(0): Printing DDC gathered Modelines:
    [ 12832.404] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12832.404] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12832.816] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 12832.816] (II) intel(0): Printing DDC gathered Modelines:
    [ 12832.816] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12832.816] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12843.035] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 12843.035] (II) intel(0): Printing DDC gathered Modelines:
    [ 12843.035] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12843.035] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12843.443] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 12843.481] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 12843.493] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
    [ 12843.702] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 12843.702] (II) intel(0): Printing DDC gathered Modelines:
    [ 12843.702] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12843.702] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12849.209] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 12851.804] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 12851.804] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 12851.855] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
    [ 12852.035] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 12852.035] (II) intel(0): Printing DDC gathered Modelines:
    [ 12852.036] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 12852.036] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 12852.458] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 14696.360] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 14696.540] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
    [ 15755.118] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 15755.300] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
    [ 19135.570] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19135.570] (II) intel(0): Printing DDC gathered Modelines:
    [ 19135.570] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19135.570] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19338.494] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19338.494] (II) intel(0): Printing DDC gathered Modelines:
    [ 19338.494] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19338.494] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19338.907] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19338.907] (II) intel(0): Printing DDC gathered Modelines:
    [ 19338.907] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19338.907] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19339.308] [mi] Increasing EQ size to 512 to prevent dropped events.
    [ 19361.868] (II) config/udev: removing device OCT KVMLite
    [ 19361.871] (II) evdev: OCT KVMLite: Close
    [ 19361.871] (II) UnloadModule: "evdev"
    [ 19363.084] (II) config/udev: Adding input device OCT KVMLite (/dev/input/event19)
    [ 19363.084] (**) OCT KVMLite: Applying InputClass "evdev keyboard catchall"
    [ 19363.084] (II) Using input driver 'evdev' for 'OCT KVMLite'
    [ 19363.084] (**) OCT KVMLite: always reports core events
    [ 19363.084] (**) evdev: OCT KVMLite: Device: "/dev/input/event19"
    [ 19363.084] (--) evdev: OCT KVMLite: Vendor 0xb39 Product 0x3
    [ 19363.084] (--) evdev: OCT KVMLite: Found keys
    [ 19363.084] (II) evdev: OCT KVMLite: Configuring as keyboard
    [ 19363.085] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.1/1-1.4.1.1:1.0/input/input26/event19"
    [ 19363.085] (II) XINPUT: Adding extended input device "OCT KVMLite" (type: KEYBOARD, id 12)
    [ 19363.085] (**) Option "xkb_rules" "evdev"
    [ 19363.085] (**) Option "xkb_model" "evdev"
    [ 19363.085] (**) Option "xkb_layout" "us"
    [ 19368.413] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19368.414] (II) intel(0): Printing DDC gathered Modelines:
    [ 19368.414] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19368.414] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19368.826] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19368.826] (II) intel(0): Printing DDC gathered Modelines:
    [ 19368.826] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19368.827] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19529.431] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19529.431] (II) intel(0): Printing DDC gathered Modelines:
    [ 19529.431] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19529.431] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19530.153] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19530.153] (II) intel(0): Printing DDC gathered Modelines:
    [ 19530.153] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19530.153] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19540.502] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19540.502] (II) intel(0): Printing DDC gathered Modelines:
    [ 19540.502] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19540.502] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19540.991] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19540.991] (II) intel(0): Printing DDC gathered Modelines:
    [ 19540.991] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19540.991] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19545.780] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19545.780] (II) intel(0): Printing DDC gathered Modelines:
    [ 19545.780] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19545.780] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 19546.260] (II) intel(0): switch to mode 1920x1080 on crtc 7 (pipe 2)
    [ 19546.455] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 19546.455] (II) intel(0): Printing DDC gathered Modelines:
    [ 19546.455] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 19546.455] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 20234.499] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 20234.499] (II) intel(0): Printing DDC gathered Modelines:
    [ 20234.499] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 20234.499] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    I had a look on the windows box and as far as I can tell the same mode is used 1920x1080@60Hz. I really have no idea of what's is going on, so far I can think of :
    - Something wrong with xorg
    - Something wrong with the i915 driver
    - The KVM cable armouring
    - Something else?!
    Any suggestion/remark/help is welcome
    And please let me know if you need me to gather more information.
    EDIT 1:
    Crappy image hoster
    Last edited by dna (2013-03-12 09:05:40)

    Hi, sorry for the delayed answer, I didn't have the time to update the topic yesterday evening.
    Also, when you boot the Arch machine, do you have the kvm set to its port until from bootloader until X is up? I have an issue with resolution detection when I boot any Linux with my kvm set to another port. It's not artefacts, but it may be worth looking into.
    During the entire boot process up to some point in the systemd init sequence my external screens are disabled either by using the KVM switch or not (When the KVM is used, the active port is set to the Arch box).
    I have did some research yesterday and I am wondering if that might be caused by DDC?! I found this post on the Open Suze forums. The user seems to describe a simmilar issue but with another hardware.
    I have been trying to disable DDC but unfortunately without success so far. By adding to the device section of Xorg (According the intel man page)
    Option "DDC" "false"
    The option is simply ignored :
    1 dna@DNA-NOTEBOOK ~ % grep DDC /var/log/Xorg.0.log
    [ 504.104] (WW) intel(0): Option "NoDDC" is not used
    [ 505.189] (II) intel(0): Printing DDC gathered Modelines:
    Is that because KMS has now become mandatory?
    Could those artifacts be the actual DDC queries? or some signal corruption due to improper handling on the KVM switch?
    EDIT1:
    Well according to the data sheet, this switch should support DDC with DDC2 Monitor. How can I found out which DDC version my monitor support? I can't find anything on the web for this model.
    I am also contacting Digitus regarding this issue. I will keep this post updated.
    EDIT2:
    I keep digging this stuff and I don't think it has to do with DDC for two reasons. First I can disable DDC/CI feature on my monitor. Sadly it didn't help. Still those artifacts. Second xrandr is able to read the EDID correctly. I am no expert but as I understand that's why DDC is meant for.
    I have also noticed an interesting thing this afternoon. I was working remotely on a box via rdp but for some reason the artifacts was not rendered on the viewer. They stopped at the border ... Any idea?
    EDIT3:
    I kept investigating this issue during the past weekend and I  think it's related to the intel driver. First I have tested the switch with 2 others machines. The first one was running a dual boot with windows 8 and arch. Both OS detected and rendered the display correctly (On windows the latest catalyst driver was used and on arch the open source radeon driver). The second setup however produced the same display corruption (As the picture in the first post) and was also running the intel driver but on a HD 3000 serie graphic chip.
    Secondly I noticed (happend only once) a couple of messages in the xorg log :
    [ 40264.490] (EE) intel(0): sna_mode_redisplay: page flipping failed, disabling CRTC:3 (pipe=0)
    [ 40264.490] (EE) intel(0): sna_mode_redisplay: page flipping failed, disabling CRTC:5 (pipe=1)
    I have tried rolling back to uxa + disabling triple buffer but sadly the issue remain.
    I was not able to replicate the above messages. Here follows 2 xorg log. Maybe that someone has an idea?!
    Xorg.0.log With SNA+TripleBuffer+TearFree
    [ 41601.648]
    X.Org X Server 1.13.3
    Release Date: 2013-03-07
    [ 41601.648] X Protocol Version 11, Revision 0
    [ 41601.648] Build Operating System: Linux 3.8.2-1-ARCH x86_64
    [ 41601.648] Current Operating System: Linux DNA-NOTEBOOK 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013 x86_64
    [ 41601.648] Kernel command line: root=/dev/sda2 ro elevator=noop acpi_osi=Linux acpi_backlight=vendor initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 41601.649] Build Date: 09 March 2013 08:45:37AM
    [ 41601.649]
    [ 41601.649] Current version of pixman: 0.28.2
    [ 41601.649] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 41601.649] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 41601.649] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 18 14:41:47 2013
    [ 41601.649] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 41601.649] (==) No Layout section. Using the first Screen section.
    [ 41601.649] (==) No screen section available. Using defaults.
    [ 41601.649] (**) |-->Screen "Default Screen Section" (0)
    [ 41601.649] (**) | |-->Monitor "<default monitor>"
    [ 41601.649] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 41601.649] (**) | |-->Device "Intel Graphics"
    [ 41601.649] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 41601.649] (==) Automatically adding devices
    [ 41601.649] (==) Automatically enabling devices
    [ 41601.649] (==) Automatically adding GPU devices
    [ 41601.649] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 41601.649] Entry deleted from font path.
    [ 41601.649] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 41601.649] Entry deleted from font path.
    [ 41601.649] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 41601.649] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 41601.649] Entry deleted from font path.
    [ 41601.649] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 41601.649] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 41601.649] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 41601.649] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 41601.649] (II) Loader magic: 0x7fcc20
    [ 41601.649] (II) Module ABI versions:
    [ 41601.649] X.Org ANSI C Emulation: 0.4
    [ 41601.649] X.Org Video Driver: 13.1
    [ 41601.649] X.Org XInput driver : 18.0
    [ 41601.649] X.Org Server Extension : 7.0
    [ 41601.649] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 41601.651] (--) PCI:*(0:0:2:0) 8086:0166:103c:1815 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00002000/64
    [ 41601.651] Initializing built-in extension Generic Event Extension
    [ 41601.651] Initializing built-in extension SHAPE
    [ 41601.651] Initializing built-in extension MIT-SHM
    [ 41601.651] Initializing built-in extension XInputExtension
    [ 41601.651] Initializing built-in extension XTEST
    [ 41601.651] Initializing built-in extension BIG-REQUESTS
    [ 41601.651] Initializing built-in extension SYNC
    [ 41601.651] Initializing built-in extension XKEYBOARD
    [ 41601.651] Initializing built-in extension XC-MISC
    [ 41601.651] Initializing built-in extension SECURITY
    [ 41601.651] Initializing built-in extension XINERAMA
    [ 41601.651] Initializing built-in extension XFIXES
    [ 41601.651] Initializing built-in extension RENDER
    [ 41601.651] Initializing built-in extension RANDR
    [ 41601.651] Initializing built-in extension COMPOSITE
    [ 41601.651] Initializing built-in extension DAMAGE
    [ 41601.651] Initializing built-in extension MIT-SCREEN-SAVER
    [ 41601.651] Initializing built-in extension DOUBLE-BUFFER
    [ 41601.651] Initializing built-in extension RECORD
    [ 41601.651] Initializing built-in extension DPMS
    [ 41601.651] Initializing built-in extension X-Resource
    [ 41601.651] Initializing built-in extension XVideo
    [ 41601.651] Initializing built-in extension XVideo-MotionCompensation
    [ 41601.651] Initializing built-in extension XFree86-VidModeExtension
    [ 41601.652] Initializing built-in extension XFree86-DGA
    [ 41601.652] Initializing built-in extension XFree86-DRI
    [ 41601.653] Initializing built-in extension DRI2
    [ 41601.653] (II) LoadModule: "glx"
    [ 41601.653] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 41601.653] (II) Module glx: vendor="X.Org Foundation"
    [ 41601.653] compiled for 1.13.3, module version = 1.0.0
    [ 41601.653] ABI class: X.Org Server Extension, version 7.0
    [ 41601.653] (==) AIGLX enabled
    [ 41601.653] Loading extension GLX
    [ 41601.653] (II) LoadModule: "intel"
    [ 41601.654] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 41601.654] (II) Module intel: vendor="X.Org Foundation"
    [ 41601.654] compiled for 1.13.2.901, module version = 2.21.3
    [ 41601.654] Module class: X.Org Video Driver
    [ 41601.654] ABI class: X.Org Video Driver, version 13.1
    [ 41601.654] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 41601.654] (++) using VT number 1
    [ 41601.654] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 41601.654] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 41601.654] (==) intel(0): RGB weight 888
    [ 41601.654] (==) intel(0): Default visual is TrueColor
    [ 41601.654] (**) intel(0): Option "AccelMethod" "sna"
    [ 41601.654] (**) intel(0): Option "TearFree" "true"
    [ 41601.654] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 41601.655] (**) intel(0): Framebuffer tiled
    [ 41601.655] (**) intel(0): Pixmaps tiled
    [ 41601.655] (**) intel(0): "Tear free" enabled
    [ 41601.655] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 41601.655] (II) intel(0): Output LVDS1 has no monitor section
    [ 41601.655] (--) intel(0): found backlight control interface intel_backlight (type 'raw')
    [ 41601.666] (II) intel(0): Output VGA1 has no monitor section
    [ 41601.742] (II) intel(0): Output HDMI1 has no monitor section
    [ 41601.782] (II) intel(0): Output DP1 has no monitor section
    [ 41602.035] (II) intel(0): Output HDMI2 has no monitor section
    [ 41602.049] (II) intel(0): Output HDMI3 has no monitor section
    [ 41602.089] (II) intel(0): Output DP2 has no monitor section
    [ 41602.129] (II) intel(0): Output DP3 has no monitor section
    [ 41602.129] (II) intel(0): EDID for output LVDS1
    [ 41602.129] (II) intel(0): Manufacturer: SEC Model: 3953 Serial#: 0
    [ 41602.129] (II) intel(0): Year: 2012 Week: 0
    [ 41602.129] (II) intel(0): EDID Version: 1.4
    [ 41602.129] (II) intel(0): Digital Display Input
    [ 41602.129] (II) intel(0): 6 bits per channel
    [ 41602.129] (II) intel(0): Digital interface is undefined
    [ 41602.129] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 14
    [ 41602.129] (II) intel(0): Gamma: 2.20
    [ 41602.129] (II) intel(0): No DPMS capabilities specified
    [ 41602.129] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 41602.129] (II) intel(0): First detailed timing is preferred mode
    [ 41602.129] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 41602.129] (II) intel(0): redX: 0.576 redY: 0.349 greenX: 0.336 greenY: 0.556
    [ 41602.129] (II) intel(0): blueX: 0.159 blueY: 0.115 whiteX: 0.313 whiteY: 0.329
    [ 41602.129] (II) intel(0): Manufacturer's mask: 0
    [ 41602.129] (II) intel(0): Supported detailed timing:
    [ 41602.129] (II) intel(0): clock: 76.9 MHz Image Size: 256 x 144 mm
    [ 41602.129] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
    [ 41602.129] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
    [ 41602.129] (II) intel(0): Supported detailed timing:
    [ 41602.129] (II) intel(0): clock: 51.3 MHz Image Size: 256 x 144 mm
    [ 41602.129] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
    [ 41602.129] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
    [ 41602.129] (II) intel(0): Unknown vendor-specific block 2
    [ 41602.129] (II) intel(0): EDID (in hex):
    [ 41602.129] (II) intel(0): 00ffffffffffff004ca3533900000000
    [ 41602.129] (II) intel(0): 00160104901a0e780a91e59359568e28
    [ 41602.129] (II) intel(0): 1d505400000001010101010101010101
    [ 41602.129] (II) intel(0): 0101010101010e1e561651000c303020
    [ 41602.129] (II) intel(0): 25000090100000190914561651000c30
    [ 41602.129] (II) intel(0): 30202500009010000019000000000000
    [ 41602.129] (II) intel(0): 00000000000000000000000000000002
    [ 41602.129] (II) intel(0): 000c4cff0a3c64100f196400000000c1
    [ 41602.129] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 41602.129] (II) intel(0): Printing probed modes for output LVDS1
    [ 41602.129] (II) intel(0): Modeline "1366x768"x60.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 41602.129] (II) intel(0): Modeline "1366x768"x40.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 41602.129] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 41602.129] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 41602.129] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 41602.129] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 41602.142] (II) intel(0): EDID for output VGA1
    [ 41602.218] (II) intel(0): EDID for output HDMI1
    [ 41602.218] (II) intel(0): Manufacturer: ACR Model: 198 Serial#: 74506241
    [ 41602.218] (II) intel(0): Year: 2010 Week: 47
    [ 41602.218] (II) intel(0): EDID Version: 1.3
    [ 41602.218] (II) intel(0): Digital Display Input
    [ 41602.219] (II) intel(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 41602.219] (II) intel(0): Gamma: 2.20
    [ 41602.219] (II) intel(0): DPMS capabilities: Off
    [ 41602.219] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 41602.219] (II) intel(0): First detailed timing is preferred mode
    [ 41602.219] (II) intel(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
    [ 41602.219] (II) intel(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
    [ 41602.219] (II) intel(0): Supported established timings:
    [ 41602.219] (II) intel(0): 720x400@70Hz
    [ 41602.219] (II) intel(0): 640x480@60Hz
    [ 41602.219] (II) intel(0): 640x480@67Hz
    [ 41602.219] (II) intel(0): 800x600@56Hz
    [ 41602.219] (II) intel(0): 800x600@60Hz
    [ 41602.219] (II) intel(0): 1024x768@60Hz
    [ 41602.219] (II) intel(0): 1024x768@70Hz
    [ 41602.219] (II) intel(0): Manufacturer's mask: 0
    [ 41602.219] (II) intel(0): Supported standard timings:
    [ 41602.219] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 41602.219] (II) intel(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 41602.219] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 41602.219] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 41602.219] (II) intel(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 41602.219] (II) intel(0): Supported detailed timing:
    [ 41602.219] (II) intel(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [ 41602.219] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 41602.219] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 41602.219] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 41602.219] (II) intel(0): Monitor name: Acer P226HQL
    [ 41602.219] (II) intel(0): Serial No: LNJ0W0014320
    [ 41602.219] (II) intel(0): EDID (in hex):
    [ 41602.219] (II) intel(0): 00ffffffffffff000472980101e07004
    [ 41602.219] (II) intel(0): 2f14010380301b782a9535a159579f27
    [ 41602.219] (II) intel(0): 0e5054b30c00714f810081809500d1c0
    [ 41602.219] (II) intel(0): 010101010101023a801871382d40582c
    [ 41602.219] (II) intel(0): 4500dd0c1100001e000000fd00384b1e
    [ 41602.219] (II) intel(0): 5311000a202020202020000000fc0041
    [ 41602.219] (II) intel(0): 636572205032323648514c0a000000ff
    [ 41602.219] (II) intel(0): 004c4e4a3057303031343332300a0059
    [ 41602.219] (II) intel(0): Printing probed modes for output HDMI1
    [ 41602.219] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 41602.219] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 41602.219] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 41602.219] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
    [ 41602.219] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 41602.219] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 41602.219] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 41602.219] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 41602.219] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 41602.219] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 41602.219] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 41602.219] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 41602.219] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 41602.219] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 41602.219] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 41602.219] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 41602.259] (II) intel(0): EDID for output DP1
    [ 41602.512] (II) intel(0): EDID for output HDMI2
    [ 41602.512] (II) intel(0): Manufacturer: ACR Model: 198 Serial#: 294659115
    [ 41602.512] (II) intel(0): Year: 2011 Week: 19
    [ 41602.512] (II) intel(0): EDID Version: 1.3
    [ 41602.512] (II) intel(0): Digital Display Input
    [ 41602.512] (II) intel(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 41602.512] (II) intel(0): Gamma: 2.20
    [ 41602.512] (II) intel(0): DPMS capabilities: Off
    [ 41602.512] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 41602.512] (II) intel(0): First detailed timing is preferred mode
    [ 41602.512] (II) intel(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
    [ 41602.512] (II) intel(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
    [ 41602.512] (II) intel(0): Supported established timings:
    [ 41602.512] (II) intel(0): 720x400@70Hz
    [ 41602.512] (II) intel(0): 640x480@60Hz
    [ 41602.512] (II) intel(0): 640x480@67Hz
    [ 41602.512] (II) intel(0): 800x600@56Hz
    [ 41602.512] (II) intel(0): 800x600@60Hz
    [ 41602.512] (II) intel(0): 1024x768@60Hz
    [ 41602.512] (II) intel(0): 1024x768@70Hz
    [ 41602.512] (II) intel(0): Manufacturer's mask: 0
    [ 41602.512] (II) intel(0): Supported standard timings:
    [ 41602.512] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 41602.512] (II) intel(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 41602.512] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 41602.512] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 41602.512] (II) intel(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 41602.512] (II) intel(0): Supported detailed timing:
    [ 41602.512] (II) intel(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [ 41602.512] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 41602.512] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 41602.512] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 41602.512] (II) intel(0): Monitor name: Acer P226HQL
    [ 41602.512] (II) intel(0): Serial No: LNJ0W0014320
    [ 41602.512] (II) intel(0): EDID (in hex):
    [ 41602.512] (II) intel(0): 00ffffffffffff00047298012b249011
    [ 41602.512] (II) intel(0): 1315010380301b782a9535a159579f27
    [ 41602.512] (II) intel(0): 0e5054b30c00714f810081809500d1c0
    [ 41602.512] (II) intel(0): 010101010101023a801871382d40582c
    [ 41602.512] (II) intel(0): 4500dd0c1100001e000000fd00384b1e
    [ 41602.512] (II) intel(0): 5311000a202020202020000000fc0041
    [ 41602.512] (II) intel(0): 636572205032323648514c0a000000ff
    [ 41602.512] (II) intel(0): 004c4e4a3057303031343332300a00d9
    [ 41602.512] (II) intel(0): Printing probed modes for output HDMI2
    [ 41602.512] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 41602.512] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 41602.512] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 41602.512] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
    [ 41602.512] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 41602.512] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 41602.513] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
    [ 41602.513] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 41602.513] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 41602.513] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 41602.513] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 41602.513] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 41602.513] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 41602.513] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 41602.513] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 41602.513] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 41602.513] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 41602.513] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 41602.513] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 41602.513] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 41602.513] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 41602.525] (II) intel(0): EDID for output HDMI3
    [ 41602.565] (II) intel(0): EDID for output DP2
    [ 41602.605] (II) intel(0): EDID for output DP3
    [ 41602.605] (II) intel(0): Output LVDS1 connected
    [ 41602.605] (II) intel(0): Output VGA1 disconnected
    [ 41602.605] (II) intel(0): Output HDMI1 connected
    [ 41602.605] (II) intel(0): Output DP1 disconnected
    [ 41602.605] (II) intel(0): Output HDMI2 connected
    [ 41602.605] (II) intel(0): Output HDMI3 disconnected
    [ 41602.605] (II) intel(0): Output DP2 disconnected
    [ 41602.605] (II) intel(0): Output DP3 disconnected
    [ 41602.605] (II) intel(0): Using exact sizes for initial modes
    [ 41602.605] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 41602.605] (II) intel(0): Output HDMI1 using initial mode 1366x768
    [ 41602.605] (II) intel(0): Output HDMI2 using initial mode 1366x768
    [ 41602.605] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 41602.605] (==) intel(0): DPI set to (96, 96)
    [ 41602.606] (II) Loading sub module "dri2"
    [ 41602.606] (II) LoadModule: "dri2"
    [ 41602.606] (II) Module "dri2" already built-in
    [ 41602.606] (==) Depth 24 pixmap format is 32 bpp
    [ 41602.606] (II) intel(0): SNA initialized with IvyBridge backend
    [ 41602.606] (==) intel(0): Backing store disabled
    [ 41602.606] (==) intel(0): Silken mouse enabled
    [ 41602.606] (II) intel(0): HW Cursor enabled
    [ 41602.606] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 41602.606] (==) intel(0): DPMS enabled
    [ 41602.606] (II) intel(0): [DRI2] Setup complete
    [ 41602.606] (II) intel(0): [DRI2] DRI driver: i965
    [ 41602.606] (II) intel(0): direct rendering: DRI2 Enabled
    [ 41602.606] (==) intel(0): hotplug detection: "enabled"
    [ 41602.606] (--) RandR disabled
    [ 41602.612] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 41602.612] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 41602.612] (II) AIGLX: enabled GLX_ARB_create_context
    [ 41602.612] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 41602.612] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 41602.613] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 41602.613] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 41602.613] (II) AIGLX: Loaded and initialized i965
    [ 41602.613] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 41602.613] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 41602.729] (II) intel(0): switch to mode 1366x768 on crtc 5 (pipe 1)
    [ 41602.909] (II) intel(0): switch to mode 1366x768 on crtc 7 (pipe 2)
    [ 41603.090] (II) intel(0): Setting screen physical size to 361 x 203
    [ 41603.110] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 41603.110] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 41603.110] (II) LoadModule: "evdev"
    [ 41603.110] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 41603.110] (II) Module evdev: vendor="X.Org Foundation"
    [ 41603.110] compiled for 1.13.0, module version = 2.7.3
    [ 41603.110] Module class: X.Org XInput Driver
    [ 41603.110] ABI class: X.Org XInput driver, version 18.0
    [ 41603.110] (II) Using input driver 'evdev' for 'Power Button'
    [ 41603.110] (**) Power Button: always reports core events
    [ 41603.110] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 41603.110] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 41603.111] (--) evdev: Power Button: Found keys
    [ 41603.111] (II) evdev: Power Button: Configuring as keyboard
    [ 41603.111] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 41603.111] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 41603.111] (**) Option "xkb_rules" "evdev"
    [ 41603.111] (**) Option "xkb_model" "evdev"
    [ 41603.111] (**) Option "xkb_layout" "us"
    [ 41603.125] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 41603.125] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 41603.125] (II) Using input driver 'evdev' for 'Video Bus'
    [ 41603.125] (**) Video Bus: always reports core events
    [ 41603.125] (**) evdev: Video Bus: Device: "/dev/input/event4"
    [ 41603.125] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 41603.125] (--) evdev: Video Bus: Found keys
    [ 41603.125] (II) evdev: Video Bus: Configuring as keyboard
    [ 41603.125] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
    [ 41603.125] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 41603.125] (**) Option "xkb_rules" "evdev"
    [ 41603.125] (**) Option "xkb_model" "evdev"
    [ 41603.125] (**) Option "xkb_layout" "us"
    [ 41603.125] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 41603.125] (II) No input driver specified, ignoring this device.
    [ 41603.125] (II) This device may have been added with another device file.
    [ 41603.125] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
    [ 41603.125] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 41603.125] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 41603.125] (**) Sleep Button: always reports core events
    [ 41603.125] (**) evdev: Sleep Button: Device: "/dev/input/event0"
    [ 41603.125] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 41603.125] (--) evdev: Sleep Button: Found keys
    [ 41603.125] (II) evdev: Sleep Button: Configuring as keyboard
    [ 41603.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
    [ 41603.126] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 41603.126] (**) Option "xkb_rules" "evdev"
    [ 41603.126] (**) Option "xkb_model" "evdev"
    [ 41603.126] (**) Option "xkb_layout" "us"
    [ 41603.126] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 41603.126] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event15)
    [ 41603.126] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
    [ 41603.126] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
    [ 41603.126] (**) HP HD Webcam [Fixed]: always reports core events
    [ 41603.126] (**) evdev: HP HD Webcam [Fixed]: Device: "/dev/input/event15"
    [ 41603.126] (--) evdev: HP HD Webcam [Fixed]: Vendor 0x4f2 Product 0xb2ef
    [ 41603.126] (--) evdev: HP HD Webcam [Fixed]: Found keys
    [ 41603.126] (II) evdev: HP HD Webcam [Fixed]: Configuring as keyboard
    [ 41603.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15/event15"
    [ 41603.126] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD, id 9)
    [ 41603.126] (**) Option "xkb_rules" "evdev"
    [ 41603.126] (**) Option "xkb_model" "evdev"
    [ 41603.126] (**) Option "xkb_layout" "us"
    [ 41603.126] (II) config/udev: Adding input device OCT KVMLite (/dev/input/event18)
    [ 41603.127] (**) OCT KVMLite: Applying InputClass "evdev keyboard catchall"
    [ 41603.127] (II) Using input driver 'evdev' for 'OCT KVMLite'
    [ 41603.127] (**) OCT KVMLite: always reports core events
    [ 41603.127] (**) evdev: OCT KVMLite: Device: "/dev/input/event18"
    [ 41603.127] (--) evdev: OCT KVMLite: Vendor 0xb39 Product 0x3
    [ 41603.127] (--) evdev: OCT KVMLite: Found keys
    [ 41603.127] (II) evdev: OCT KVMLite: Configuring as keyboard
    [ 41603.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1.1/3-1.4.1.1:1.0/input/input22/event18"
    [ 41603.127] (II) XINPUT: Adding extended input device "OCT KVMLite" (type: KEYBOARD, id 10)
    [ 41603.127] (**) Option "xkb_rules" "evdev"
    [ 41603.127] (**) Option "xkb_model" "evdev"
    [ 41603.127] (**) Option "xkb_layout" "us"
    [ 41603.127] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event19)
    [ 41603.127] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 41603.127] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
    [ 41603.127] (**) Logitech Logitech Illuminated Keyboard: always reports core events
    [ 41603.127] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event19"
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
    [ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
    [ 41603.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1.3/3-1.4.1.3:1.0/input/input23/event19"
    [ 41603.127] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 11)
    [ 41603.127] (**) Option "xkb_rules" "evdev"
    [ 41603.127] (**) Option "xkb_model" "evdev"
    [ 41603.127] (**) Option "xkb_layout" "us"
    [ 41603.127] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event20)
    [ 41603.127] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 41603.127] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
    [ 41603.127] (**) Logitech Logitech Illuminated Keyboard: always reports core events
    [ 41603.127] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event20"
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
    [ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
    [ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
    [ 41603.127] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
    [ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
    [ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
    [ 41603.127] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
    [ 41603.127] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
    [ 41603.127] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 41603.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1.3/3-1.4.1.3:1.1/input/input24/event20"
    [ 41603.128] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 12)
    [ 41603.128] (**) Option "xkb_rules" "evdev"
    [ 41603.128] (**) Option "xkb_model" "evdev"
    [ 41603.128] (**) Option "xkb_layout" "us"
    [ 41603.128] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
    [ 41603.128] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
    [ 41603.128] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
    [ 41603.128] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
    [ 41603.128] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
    [ 41603.128] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
    [ 41603.128] (II) config/udev: Adding input device Saitek Cyborg R.A.T.9 Wireless Mouse (/dev/input/event21)
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: Applying InputClass "evdev pointer catchall"
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: Applying InputClass "R.A.T.9"
    [ 41603.128] (II) Using input driver 'evdev' for 'Saitek Cyborg R.A.T.9 Wireless Mouse'
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: always reports core events
    [ 41603.128] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Device: "/dev/input/event21"
    [ 41603.128] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: ButtonMapping '1 2 3 4 5 0 0 8 9 7 6 12 0 0 0 16 17'
    [ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Vendor 0x6a3 Product 0xcd9
    [ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found 17 mouse buttons
    [ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found scroll wheel(s)
    [ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found relative axes
    [ 41603.128] (--) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Found x and y relative axes
    [ 41603.128] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Configuring as mouse
    [ 41603.128] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: Adding scrollwheel support
    [ 41603.128] (**) Option "YAxisMapping" "10 11"
    [ 41603.128] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: YAxisMapping: buttons 10 and 11
    [ 41603.128] (**) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 41603.128] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1.4/3-1.4.1.4:1.0/input/input25/event21"
    [ 41603.128] (II) XINPUT: Adding extended input device "Saitek Cyborg R.A.T.9 Wireless Mouse" (type: MOUSE, id 13)
    [ 41603.128] (II) evdev: Saitek Cyborg R.A.T.9 Wireless Mouse: initialized for relative axes.
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) keeping acceleration scheme 1
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration profile 0
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration factor: 2.000
    [ 41603.128] (**) Saitek Cyborg R.A.T.9 Wireless Mouse: (accel) acceleration threshold: 4
    [ 41603.129] (II) config/udev: Adding input device Saitek Cyborg R.A.T.9 Wireless Mouse (/dev/input/mouse2)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.129] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.129] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.129] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.129] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.129] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.129] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event14)
    [ 41603.129] (II) No input driver specified, ignoring this device.
    [ 41603.129] (II) This device may have been added with another device file.
    [ 41603.130] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
    [ 41603.130] (II) No input driver specified, ignoring this device.
    [ 41603.130] (II) This device may have been added with another device file.
    [ 41603.130] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
    [ 41603.130] (II) No input driver specified, ignoring this device.
    [ 41603.130] (II) This device may have been added with another device file.
    [ 41603.130] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
    [ 41603.130] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 41603.130] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 41603.130] (**) AT Translated Set 2 keyboard: always reports core events
    [ 41603.130] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
    [ 41603.130] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 41603.130] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 41603.130] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 41603.130] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
    [ 41603.130] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 41603.130] (**) Option "xkb_rules" "evdev"
    [ 41603.130] (**) Option "xkb_model" "evdev"
    [ 41603.130] (**) Option "xkb_layout" "us"
    [ 41603.130] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event16)
    [ 41603.130] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 41603.130] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 41603.130] (**) PS/2 Generic Mouse: always reports core events
    [ 41603.130] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event16"
    [ 41603.130] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
    [ 41603.130] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
    [ 41603.130] (--) evdev: PS/2 Generic Mouse: Found relative axes
    [ 41603.130] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
    [ 41603.130] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
    [ 41603.130] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 41603.130] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 41603.130] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event16"
    [ 41603.130] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
    [ 41603.130] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
    [ 41603.130] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 41603.130] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 41603.130] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 41603.130] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 41603.131] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
    [ 41603.131] (II) No input driver specified, ignoring this device.
    [ 41603.131] (II) This device may have been added with another device file.
    [ 41603.131] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
    [ 41603.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 41603.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 41603.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 41603.131] (II) LoadModule: "synaptics"
    [ 41603.131] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 41603.131] (II) Module synaptics: vendor="X.Org Foundation"
    [ 41603.131] compiled for 1.13.2, module version = 1.6.3
    [ 41603.131] Module class: X.Org XInput Driver
    [ 41603.131] ABI class: X.Org XInput driver, version 18.0
    [ 41603.131] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 41603.131] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 41603.131] (**) Option "Device" "/dev/input/event17"
    [ 41603.182] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1200 - 5736
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 824 - 5172
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 41603.182] (**) Option "TapButton1" "1"
    [ 41603.182] (**) Option "TapButton2" "2"
    [ 41603.182] (**) Option "TapButton3" "3"
    [ 41603.182] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 41603.182] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 41603.209] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input17/event17"
    [ 41603.209] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
    [ 41603.209] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 41603.209] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 41603.209] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.032
    [ 41603.209] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 41603.209] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 41603.209] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 41603.209] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 41603.209] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 41603.209] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 41603.209] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 41603.209] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
    [ 41603.209] (II) No input driver specified, ignoring this device.
    [ 41603.209] (II) This device may have been added with another device file.
    [ 41603.210] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 41603.210] (II) No input driver specified, ignoring this device.
    [ 41603.210] (II) This device may have been added with another device file.
    [ 41603.210] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
    [ 41603.210] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 41603.210] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 41603.210] (**) HP WMI hotkeys: always reports core events
    [ 41603.210] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6"
    [ 41603.210] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 41603.210] (--) evdev: HP WMI hotkeys: Found keys
    [ 41603.210] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 41603.210] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
    [ 41603.210] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 17)
    [ 41603.210] (**) Option "xkb_rules" "evdev"
    [ 41603.210] (**) Option "xkb_model" "evdev"
    [ 41603.210] (**) Option "xkb_layout" "us"
    [ 41603.443] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 41603.443] (II) intel(0): Printing DDC gathered Modelines:
    [ 41603.443] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 41603.443] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 41608.132] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 41608.132] (II) intel(0): Printing DDC gathered Modelines:
    [ 41608.132] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 41608.132] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 41608.609] [mi] Increasing EQ size to 512 to prevent dropped events.
    [ 41608.623] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 41608.623] (II) intel(0): Printing DDC gathered Modelines:
    [ 41608.623] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 41608.623] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 41618.875] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 41618.876] (II) intel(0): Printing DDC gathered Modelines:
    [ 41618.876] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 41618.876] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    [ 41619.358] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 41619.386] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 41619.394] (II) intel(0): switch to mode 1920x1080 on crtc 5 (pipe 1)
    [ 41619.577] (II) intel(0): switch to mode 1920x1080 on crtc 7 (pipe 2)
    [ 41619.841] (II) intel(0): EDID vendor "SEC", prod id 14675
    [ 41619.841] (II) intel(0): Printing DDC gathered Modelines:
    [ 41619.841] (II) intel(0): Modeline "1366x768"x0.0 76.94 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (46.8 kHz eP)
    [ 41619.841] (II) intel(0): Modeline "1366x768"x0.0 51.29 1366 1414 1446 1644 768 770 775 780 -hsync -vsync (31.2 kHz e)
    Xorg.0.log With UXA+TearFree-TripleBuffer
    [ 41275.791]
    X.Org X Server 1.13.3
    Release Date: 2013-03-07
    [ 41275.791] X Protocol Version 11, Revision 0
    [ 41275.791] Build Operating System: Linux 3.8.2-1-ARCH x86_64
    [ 41275.791] Current Operating System: Linux DNA-NOTEBOOK 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013 x86_64
    [ 41275.791] Kernel command line: root=/dev/sda2 ro elevator=noop acpi_osi=Linux acpi_backlight=vendor initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 41275.791] Build Date: 09 March 2013 08:45:37AM
    [ 41275.791]
    [ 41275.792] Current version of pixman: 0.28.2
    [ 41275.792] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 41275.792] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 41275.792] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 18 14:36:21 2013
    [ 41275.792] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 41275.793] (==) No Layout section. Using the first Screen section.
    [ 41275.793] (==) No screen section available. Using defaults.
    [ 41275.793] (**) |-->Screen "Default Screen Section" (0)
    [ 41275.793] (**) | |-->Monitor "<default monitor>"
    [ 41275.793] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 41275.793] (**) | |-->Device "Intel Graphics"
    [ 41275.793] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 41275.793] (==) Automatically adding devices
    [ 41275.793] (==) Automatically enabling devices
    [ 41275.793] (==) Automatically adding GPU devices
    [ 41275.793] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 41275.793] Entry deleted from font path.
    [ 41275.793] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 41275.793] Entry deleted from font path.
    [ 41275.793] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 41275.793] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 41275.793] Entry deleted from font path.
    [ 41275.793] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 41275.793] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 41275.793] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 41275.793] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 41275.793] (II) Loader magic: 0x7fcc20
    [ 41275.793] (II) Module ABI versions:
    [ 41275.793] X.Org ANSI C Emulation: 0.4
    [ 41275.793] X.Org Video Driver: 13.1
    [ 41275.793] X.Org XInput driver : 18.0
    [ 41275.793] X.Org Server Extension : 7.0
    [ 41275.793] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 41275.795] (--) PCI:*(0:0:2:0) 8086:0166:103c:1815 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00002000/64
    [ 41275.795] Initializing built-in extension Generic Event Extension
    [ 41275.795] Initializing built-in extension SHAPE
    [ 41275.795] Initializing built-in extension MIT-SHM
    [ 41275.795] Initializing built-in extension XInputExtension
    [ 41275.795] Initializing built-in extension XTEST
    [ 41275.795] Initializing built-in extension BIG-REQUESTS
    [ 41275.795] Initializing built-in extension SYNC
    [ 41275.795] Initializing built-in extension XKEYBOARD
    [ 41275.795] Initializing built-in extension XC-MISC
    [ 41275.795] Initializing built-in extension SECURITY
    [ 41275.795] Initializing built-in extension XINERAMA
    [ 41275.795] Initializing built-in extension XFIXES
    [ 41275.795] Initializing built-in extension RENDER
    [ 41275.795] Initializing built-in extension RANDR
    [ 41275.795] Initializing built-in extension COMPOSITE
    [ 41275.795] Initializing built-in extension DAMAGE
    [ 41275.795] Initializing built-in extension MIT-SCREEN-SAVER
    [ 41275.795] Initializing built-in extension DOUBLE-BUFFER
    [ 41275.795] Initializing built-in extension RECORD
    [ 41275.795] Initializing built-in extension DPMS
    [ 41275.795] Initializing built-in extension X-Resource
    [ 41275.795] Initializing built-in extension XVideo
    [ 41275.795] Initializing built-in extension XVideo-MotionCompensation
    [ 41275.795] Initializing built-in extension XFree86-VidModeExtension
    [ 41275.796] Initializing built-in extension XFree86-DGA
    [ 41275.796] Initializing built-in extension XFree86-DRI
    [ 41275.797] Initializing built-in extension DRI2
    [ 41275.797] (II) LoadModule: "glx"
    [ 41275.798] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 41275.798] (II) Module glx: vendor="X.Org Foundation"
    [ 41275.798] compiled for 1.13.3, module version = 1.0.0
    [ 41275.798] ABI class: X.Org Server Extension, version 7.0
    [ 41275.798] (==) AIGLX enabled
    [ 41275.799] Loading extension GLX
    [ 41275.799] (II) LoadModule: "intel"
    [ 41275.799] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 41275.799] (II) Module intel: vendor="X.Org Foundation"
    [ 41275.799] compiled for 1.13.2.901, module version = 2.21.3
    [ 41275.799] Module class: X.Org Video Driver
    [ 41275.799] ABI class: X.Org Video Driver, version 13.1
    [ 41275.799] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 41275.800] (++) using VT number 1
    [ 41275.800] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 41275.800] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 41275.800] (==) intel(0): RGB weight 888
    [ 41275.800] (==) intel(0): Default visual is TrueColor
    [ 41275.800] (**) intel(0): Option "AccelMethod" "uxa"
    [ 41275.800] (**) intel(0): Option "TripleBuffer" "false"
    [ 41275.800] (**) intel(0): Option "TearFree" "true"
    [ 41275.800] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 41275.800] (**) intel(0): Relaxed fencing enabled
    [ 41275.800] (**) intel(0): Wait on SwapBuffers? enabled
    [ 41275.800] (**) intel(0): Triple buffering? disabled
    [ 41275.800] (**) intel(0): Framebuffer tiled
    [ 41275.800] (**) intel(0): Pixmaps tiled
    [ 41275.800] (**) intel(0): 3D buffers tiled
    [ 41275.800] (**) intel(0): SwapBuffers wait enabled
    [ 41275.800] (==) intel(0): video overlay key set to 0x101fe
    [ 41275.800] (II) intel(0): Output LVDS1 has no monitor section
    [ 41275.800] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
    [ 41275.812] (II) intel(0): Output VGA1 has no monitor section
    [ 41275.889] (II) intel(0): Output HDMI1 has no monitor section
    [ 41275.929] (II) intel(0): Output DP1 has no monitor section
    [ 41276.182] (II) intel(0): Output HDMI2 has no monitor section
    [ 41276.195] (II) intel(0): Output HDMI3 has no monitor section
    [ 41276.235] (II) intel(0): Output DP2 has no monitor section
    [ 41276.275] (II) intel(0): Output DP3 has no monitor section
    [ 41276.275] (II) intel(0): EDID for output LVDS1
    [ 41276.276] (II) intel(0): Manufacturer: SEC Model: 3953 Serial#: 0
    [ 41276.276] (II) intel(0): Year: 2012 Week: 0
    [ 41276.276] (II) intel(0): EDID Version: 1.4
    [ 41276.276] (II) intel(0): Digital Display Input
    [ 41276.276] (II) intel(0): 6 bits per channel
    [ 41276.276] (II) intel(0): Digital interface is undefined
    [ 41276.276] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 14
    [ 41276.276] (II) intel(0): Gamma: 2.20
    [ 41276.276] (II) intel(0): No DPMS capabilities specified
    [ 41276.276] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 41276.276] (II) intel(0): First detailed timing is preferred mode
    [ 41276.276] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 41276.276] (II) intel(0): redX: 0.576 redY: 0.349 greenX: 0.336 greenY: 0.556
    [ 41276.276] (II) intel(0): blueX: 0.159 blueY: 0.115 whiteX: 0.313 whiteY: 0.329
    [ 41276.276] (II) intel(0): Manufacturer's mask: 0
    [ 41276.276] (II) intel(0): Supported detailed timing:
    [ 41276.276] (II) intel(0): clock: 76.9 MHz Image Size: 256 x 144 mm
    [ 41276.276] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
    [ 41276.276] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
    [ 41276.276] (II) intel(0): Supported detailed timing:
    [ 41276.276] (II) intel(0): clock: 51.3 MHz Image Size: 256 x 144 mm
    [ 41276.276] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1644 h_border: 0
    [ 41276.276] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
    [ 41276.276] (II) intel(0): Unknown vendor-specific block 2
    [ 41276.276] (II) intel(0): EDID (in hex):
    [ 41276.276] (II) intel(0): 00ffffffffffff004ca3533900000000
    [ 41276.276] (II) intel(0): 00160104901a0e780a91e59359568e28
    [ 41276.276] (II) intel(0): 1d505400000001010101010101010101
    [ 41276.276] (II) intel(0): 0101010101010e1e561651000c303020
    [ 41276.276] (II) intel(0): 25000090100000190914561651000c30
    [ 41276.276] (II) intel(0): 30202500009010000019000000000000
    [ 41276.276] (II) intel(0): 00000000000000000000000000000002
    [ 41276.276] (II) intel(0): 000c4cff0a

  • Lockup and messed display with intel 2.7 driver

    my 865 G box
    xorg 1.5 + intel = crash and i am thrown to the console
    xorg 1.6 + intel legacy = working (bad performance)
    xorg 1.6 + intel 2.6 = crash and i am thrown to the console
    xorg 1.6 + intel 2.7 = no more console but this
    i have kde 4 themed mouse arrow that i can move
    keyboard does not react (including num lock and alt ctrl whatever)
    display stays like that and does not change

    with intel 2.7.0 i had the same, i think it's this issue:
    http://bugs.archlinux.org/task/14394
    http://bbs.archlinux.org/viewtopic.php?id=70209
    for me xorg 1.6 and intel 2.6.3 works fine, but with KMS enabled (exa crashes as well):
    http://bbs.archlinux.org/viewtopic.php?id=69083
    - however I have 945GME

  • Graphics issue on Intel 915GM

    Hi,
    my graphics driver doesn't seem to be working properly as glxgears runs with only half my vsynch rate.
    I am running Arch on an IBM Thinkpad X41T, and use the xf86-video-intel driver. I enabled early kms via "i915" in the Modules array of mkinitcpio.conf, but the issue remains weather or not I remove it (I did run mkinitcpio -p linux after changing the file). My Xorg.0.log does not have any (EE) entries, except for "unable to load module 'vesa'". I did uninstall vesa after reading that it might cause graphics issues if one has proper graphics drivers installed.
    What I realized is that my Display controller does not seem to have a driver installed. lspci -k returns
    $ lspci -k
    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
    Subsystem: IBM ThinkPad Z60t
    Kernel driver in use: agpgart-intel
    00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    Subsystem: IBM Device 0582
    Kernel driver in use: i915
    00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    Subsystem: IBM Device 0582
    00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
    Kernel driver in use: pcieport
    00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
    Subsystem: IBM Device 0565
    Kernel driver in use: uhci_hcd
    00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
    Subsystem: IBM Device 0565
    Kernel driver in use: uhci_hcd
    00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
    Subsystem: IBM Device 0565
    Kernel driver in use: uhci_hcd
    00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
    Subsystem: IBM Device 0565
    Kernel driver in use: uhci_hcd
    00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
    Subsystem: IBM Device 0566
    Kernel driver in use: ehci_hcd
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
    Subsystem: IBM Device 0581
    Kernel driver in use: snd_intel8x0
    00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
    Subsystem: IBM Device 0574
    Kernel driver in use: snd_intel8x0m
    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
    Subsystem: IBM Device 0568
    Kernel driver in use: lpc_ich
    00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
    Subsystem: IBM Device 056a
    Kernel driver in use: ata_piix
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
    Subsystem: IBM Device 056b
    Kernel driver in use: i801_smbus
    02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
    Subsystem: IBM ThinkPad Z60t
    Kernel driver in use: tg3
    04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
    Subsystem: IBM Device 0555
    Kernel driver in use: yenta_cardbus
    04:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
    Subsystem: IBM ThinkPad X60s / Z60t
    Kernel driver in use: sdhci-pci
    04:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
    Subsystem: IBM Device 057e
    Kernel driver in use: ath5k
    Is the Display controller the problem here? What drivers do I need, if any?
    I'm thankful for any helpful comments!
    Cheers!
    Neuneck

    Hi
    have you try the    "AccelMethod"  "uxa" in  /etc/X11/xorg.conf.d/20-intel.conf
    https://wiki.archlinux.org/index.php/In … and_tricks

  • Is there an up-to-date xf86-video-* for intel 82865G?

    If there's a better place for this question, I will gladly repost.  As always, I'll thankfully accept an "RTFM" - as long as I know which "The Fine Manuals" to Read!
    I have a Dell Optiplex GX (250 - I think) with this graphics chipset.  I installed Arch for the first time over the weekend, and things pretty much work great.  But, i think I'm using the xvesa driver (I'm not the machine to post my Xorg.0.log and I don't use an xorg.conf file - I tried that and X locked out my keboard and mouse).  Performance is still reasnoable, but Xine (my preferred media player) tends to bring up the video about halfway down the window, chopping off the bottom half.  A quick Google search indicated that it is likely my vieo driver and the xv module.
    I saw on the forumes that xf86-video-intel-legacy is no longer available, and the AUR package xf86-vieo-latest is out of date.  What options do I have left?  There was talk in that thread of downgrading Xorg.  I generally like to stay up-to-date - is downgrading my only real option?  Is there a process by which I can install drivers directly from Xorg, without moving too far outside of Arch's purview, and how do I find out if good drivers exist?
    Again, let me know if need to provide any more information and/or re-post somehwere more appropriate.

    I installed xf86-video-intel, but since I don't have an xorg.conf file, I don't know if it's being used - when I get home, I'll look at my Xorg.0.log file and see.  I'll also post my 'lspci | grep VGA' output.
    Some googling turned up this Xorg page on the intel driver: http://www.x.org/wiki/IntelGraphicsDriv … %28865G%29
    According to that page,
    It will work best with an i915 module from a recent kernel (2.6.31) and with kernel-modesetting (KMS, specified by loading i915 with the option "modeset=1").
    I have not enabled KMS (searching the forums has shown me how to do that) - might that be my problem?

  • Xinerama with a Mobile Intel 945GM graphics card

    Hi,
    I'm trying to write a xorg.conf to enable Xinerama. But as you've already guessed it isn't working.
    Xinerama works perfectly fine, if i use xrandr.
    Could please look over my config and tell me what's wrong?
    Thanks in advance!
    Informations you may need:
    Im using the xf86-video-intel-legacy driver.
    This is my xorg.conf:
    Section "Monitor"
    Identifier "Main Monitor"
    EndSection
    Section "Monitor"
    Identifier "Second Monitor"
    VendorName "ACR"
    ModelName "Acer X233H"
    HorizSync 30.0 - 94.0
    VertRefresh 49.0 - 75.0
    Option "DPMS"
    Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
    EndSection
    Section "Device"
    Identifier "0 Intel 945GM"
    Driver "intel"
    BusID "PCI:0:2:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "1 Intel 945GM"
    Driver "intel"
    BusID "PCI:0:2:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "0 Default Screen"
    Device "0 Intel 945GM"
    Monitor "Main Monitor"
    SubSection "Display"
    Depth 24
    Modes "1280x800"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "1 Default Screen"
    Device "1 Intel 945GM"
    Monitor "Second Monitor"
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen 0 "0 Default Screen"
    Screen 1 "1 Default Screen" LeftOf "0 Default Screen"
    # Option "Xinerama" "true"
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    # vim: sw=4 ts=4
    And this is my /var/log/Xorg0.log:
    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux skynet 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 10 April 2009 07:03:14PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 13 22:49:02 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Default Layout"
    (**) |-->Screen "0 Default Screen" (0)
    (**) | |-->Monitor "Main Monitor"
    (**) | |-->Device "0 Intel 945GM"
    (**) |-->Screen "1 Default Screen" (1)
    (**) | |-->Monitor "Second Monitor"
    (**) | |-->Device "1 Intel 945GM"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc100000/524288, 0xc0000000/268435456, 0xdc200000/262144, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdc180000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    (--) intel(0): Chipset: "945GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xDC100000
    (II) intel(0): 2 display pipes available.
    (==) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Main Monitor
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (II) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "ACR", prod id 147
    (II) intel(0): Using EDID range info for horizontal sync
    (II) intel(0): Using EDID range info for vertical refresh
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    (II) intel(0): EDID vendor "ACR", prod id 147
    (II) intel(0): Output VGA connected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using user preference for initial modes
    (II) intel(0): Output VGA using initial mode 1280x800
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) intel(0): Display dimensions: (510, 290) mm
    (**) intel(0): DPI set to (95, 168)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Reloading /usr/lib/xorg/modules//libvbe.so
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Reloading /usr/lib/xorg/modules//libvgahw.so
    (==) intel(1): Depth 24, (--) framebuffer bpp 32
    (==) intel(1): RGB weight 888
    (==) intel(1): Default visual is TrueColor
    (II) intel(1): Integrated Graphics Chipset: Intel(R) 945GM
    (--) intel(1): Chipset: "945GM"
    (--) intel(1): Linear framebuffer at 0xC0000000
    (--) intel(1): IO registers at addr 0xDC100000
    (II) intel(1): 2 display pipes available.
    (==) intel(1): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(1): Output VGA using monitor section Second Monitor
    (II) intel(1): I2C bus "CRTDDC_A" initialized.
    (II) intel(1): Output LVDS has no monitor section
    (II) intel(1): I2C bus "LVDSDDC_C" initialized.
    (II) intel(1): Attempting to determine panel fixed mode.
    (II) intel(1): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(1): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (II) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(1): found backlight control method /sys/class/backlight/acpi_video0
    (II) intel(1): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(1): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(1): No SDVO device found on SDVOB
    (II) intel(1): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(1): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(1): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(1): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(1): No SDVO device found on SDVOC
    (II) intel(1): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(1): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(1): Output TV has no monitor section
    (II) intel(1): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
    (II) intel(1): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
    (II) intel(1): EDID vendor "ACR", prod id 147
    (II) intel(1): Using hsync ranges from config file
    (II) intel(1): Using vrefresh ranges from config file
    (II) intel(1): Printing DDC gathered Modelines:
    (II) intel(1): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    (II) intel(1): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) intel(1): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) intel(1): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) intel(1): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) intel(1): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) intel(1): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    (II) intel(1): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) intel(1): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) intel(1): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    (II) intel(1): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) intel(1): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    (II) intel(1): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
    (II) intel(1): EDID vendor "ACR", prod id 147
    (II) intel(1): Output VGA connected
    (II) intel(1): Output LVDS connected
    (II) intel(1): Output TV disconnected
    (II) intel(1): Using user preference for initial modes
    (II) intel(1): Output VGA using initial mode 1920x1080
    (II) intel(1): Output LVDS using initial mode 1280x800
    (II) intel(1): Monitoring connected displays enabled
    (II) intel(1): detected 256 kB GTT.
    (II) intel(1): detected 7932 kB stolen memory.
    (==) intel(1): video overlay key set to 0x101fe
    (==) intel(1): Will not try to enable page flipping
    (==) intel(1): Triple buffering disabled
    (==) intel(1): Intel XvMC decoder disabled
    (==) intel(1): Using gamma correction (1.0, 1.0, 1.0)
    (--) intel(1): Using HW Cursor because it's enabled on primary head.
    (**) intel(1): Display dimensions: (510, 290) mm
    (**) intel(1): DPI set to (95, 168)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Reloading /usr/lib/xorg/modules//libfb.so
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Reloading /usr/lib/xorg/modules//libexa.so
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(1): Comparing regs from server start up to After PreInit
    (WW) intel(1): Register 0x61200 (PP_STATUS) changed from 0xd0000009 to 0xd000000a
    (WW) intel(1): PP_STATUS before: on, ready, sequencing on
    (WW) intel(1): PP_STATUS after: on, ready, sequencing on
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? Yes, I do.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 488960 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1955836 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    Backtrace:
    0: /usr/bin/X(xorg_backtrace+0x3b) [0x813278b]
    1: /usr/bin/X(xf86SigHandler+0x51) [0x80dda61]
    2: [0xb7fcb400]
    3: /usr/lib/xorg/modules/drivers//intel_drv.so [0xb7a5258e]
    4: /usr/lib/xorg/modules/drivers//intel_drv.so(i830_allocate_2d_memory+0x144) [0xb7a527b4]
    5: /usr/lib/xorg/modules/drivers//intel_drv.so [0xb7a47e2b]
    6: /usr/lib/xorg/modules/drivers//intel_drv.so [0xb7a4cafd]
    7: /usr/bin/X(AddScreen+0x19d) [0x807167d]
    8: /usr/bin/X(InitOutput+0x206) [0x80aeb16]
    9: /usr/bin/X(main+0x1e1) [0x8071d61]
    10: /lib/libc.so.6(__libc_start_main+0xe5) [0xb7bab6c5]
    11: /usr/bin/X [0x8071401]
    Fatal server error:
    Caught signal 11. Server aborting
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.

    Blind wrote:Umm, weelll, xorgconfig or X -config might produce something to work with, but in general you need to edit the xorg.conf file for best performance. As to your editing of 'vga' to 'xf86-video-intel': you should replace it with 'intel'. There are many, many sample xorg.conf's out there that use the intel driver, so google is your friend.
    Cheers,
    Blind
    +1
    You can specify the amount of videoram in xorg.conf and you need to add the 1280*800 resolution to it too. That's all I had to do to get it to work on my father's laptop.
    Zl.
    /EDIT: numerous wiki-entries could help you, f.e. http://wiki.archlinux.org/index.php/Intel_GMA_950
    Last edited by zenlord (2008-01-21 09:54:09)

Maybe you are looking for