Know the all function modules & descriptions

Is there any transaction or table or program to know the all the function modules and its descriptions

Okay, here is an easier way. On the main screen of SE37, click on the binoculars (the "Find" button on the top menu). Now on the next screen just enter the maximum number of hits that you want and click on the execute button.
Note: if you want to use table TFDIR to see all entries, use transaction SE16 and on the selection screen for that table you will need to change the maximum number of hits (last field on the screen).
- April
Message was edited by:
April King

Similar Messages

Need to know the standard function module/program in E recruitment

Hi All,
I need to know the standard function module/programm that defaults the 'Functional area' field in the posting page from the requisition page.
Early responce is greatly appreciated.
Thanks and best regards
Rajeev

Hi Masa,
Thanks for your reply.
We are using Assets with the integration of Project systems. We are now in 4.6C R/3 & SRM 5.0 system. And now R/3 upgrade and SRM upgrade going on smultaniously to ECC6.0 and SRM 7.0 respectively.
I would like to know any new functionality available in the latest upgrades and we have done lot of customization for Asset Procurement. And would like to go with Vanilla.
Can you please provide me some inputs about the Project (WBS element ) based Asset Procurement in SRM as standard.
Thanks and Regards,
Ramesh

Need to know the standard function module in E-Recruitment

Hi All,
I need to know the standard function module that defaults the value of 'Functional area' in 'Posting' from 'Requisition'.
Early response is greatly appreciated.
Thanks an best regards
Rajeev

Hi Masa,
Thanks for your reply.
We are using Assets with the integration of Project systems. We are now in 4.6C R/3 & SRM 5.0 system. And now R/3 upgrade and SRM upgrade going on smultaniously to ECC6.0 and SRM 7.0 respectively.
I would like to know any new functionality available in the latest upgrades and we have done lot of customization for Asset Procurement. And would like to go with Vanilla.
Can you please provide me some inputs about the Project (WBS element ) based Asset Procurement in SRM as standard.
Thanks and Regards,
Ramesh

Purpose of all the below Function Modules?

Hi All,
What is the Purpose of all the below Function Modules?
CALL FUNCTION 'K_REPO_PCA_AUTHORITY_CHECK'
CALL FUNCTION 'K_PCA_RESP_AUTHORITY_CHECK'
CALL FUNCTION 'G_CURRENCY_FROM_CT_GET'
CALL FUNCTION 'GET_CURRENT_YEAR'
CALL FUNCTION 'BDC_OPEN_GROUP'
CALL FUNCTION 'BDC_INSERT'
CALL FUNCTION 'MESSAGE_TEXT_BUILD'
Akshitha.

Hi,,
G_Buffer_ReSET-->Deleting Buffer in Set Manager
G_SET_ENCRYPT_SETID-->Conversion of Combination of Characteristics in a Set ID
G_SET_GET_INFO-->Checks whether Set exists and Provides Information about Set
Reward IF useful

Change the standard function module

The standard function module FI_DUPLICATE_INVOICE_CHECK will check whether an invoice/credit memo has already been posted where all of the following attributes match: Company code, vendor, currency, document date, reference number (If a reference number was entered in the current invoice/credit memo). If no reference number was entered in the current invoice/credit memo the system checks whether an invoice/credit memo has already been posted where all of the following attributes match: Company code, vendor, currency, document date, amount in document currency
my requirement is
The above functionality described in the short description doesnt provide for the need within AP to check on duplicate invoices. The functionality in FI differs from the functionaltiy provided in LIV and therefor needs to be aligned. The risk of posting duplicate invoice entry is eminent since the check is dependent on all parameters. For a good duplicate invoice number check we need FI to check on Vendor and invoice reference within the same fiscal year. To modify rules, copy FI_DUPLICATE_INVOICE_CHECK, modify the checks and then call the copied function module from FB60. The remaining field check in the standard function module should be deleted.
how to achive this. i didn't understand the requirement .Please give me any suggestion for this.

Hi ,
I think what you are saying is the functionality given in Logistics Invoice verification is not suitable for FI Invoice.
If I am correct , then there is a configuration setting in SPRO where you set check for duplicate invoice. It has just three checkboxes
a) Company code b) Reference number c) Invoice date
so I think this configuration setting will suffice your requirement.
Please let me know.
Amit

SEND_ERROR in the SMARTFORM function module

Hi All,
I want to send the PO via e-mai as attached PDF file. It is working fine in DEV. But in PRD i am getting SEND_ERROR in the SMARTFORM function module.
can any one hep me to fix this????
CALL FUNCTION fm_name
    EXPORTING
      archive_index      = toa_dara
      archive_parameters = arc_params
      control_parameters = ssfctrlop
      output_options     = ls_composer_param
      user_settings      = 'X'
      nast               = nast
      zxekko             = zxekko
      zxpekko            = zxpekko
    IMPORTING
      job_output_info    = job_output_info
    EXCEPTIONS
      formatting_error   = 1
      internal_error     = 2
      send_error         = 3
      user_canceled      = 4
      OTHERS             = 5.
Rgds,
Rajesh.

Hi,
Go to se37,enter ur generated function module name .
Put a brkpoint at first executable statement of that FM.
If u run ur program,then it will stop.
Then put brk point on SSRFT_READ_ERROR(From menu).
after press f8,u will know what is the reason of ur error.
and check thjis also
http://wiki.sdn.sap.com/wiki/display/Snippets/Unique+Driver+Program+for+any+smartform+of+a+transaction
Try like this.
Thanks
Gourav.

Where should i call the rfc function module? in xi or in r/3

where should i call the rfc function module?
for the synch scenario: file < -- > xi <---> rfc
i know the type of rfc is tcp/ip; but i'm not sure with the followings,
and with some trials i can not even see any message via rwb even all the setting
can be activated without errors.
where should i create the rfc destination? in r/3 or xi
where should i call the rfc via abap program? in r/3 or xi
i guess the calling program should belong to the different server with the rfc itself....
so confused....
Thanks for your reply!!
Jun

if i create the destination in xi point to r/3, then i call the rfc use the destination in r/3 right ?
The call doesnt use the destination in R3. XI has the RFC destination which is just used to connect to the R3 system
but where i need to create the fm via se37? in xi or r/3 ?
In R3
Regards,
Prateek

APO-DP Function Modules Description.

Hi,
Can I get the description of all Function Modules used in APO-DP.
i.e. just a one liner of what each Function Module does in APO.
Regards,
Vikas

Hi
Check the Table
<b>TFTIT</b>
for all descriptions of the fun modules in SAP
Regards
Anji

How to find the existing function module is used in another function module

Hi all,
I created a function module and the same one is called from another function module.
When I tried to find where the first function module is used using Where-used List , I am getting the message "function module not found in selected areas" .
Please guide me what is other method to find whether the function module is used in another one.
Thanks,
Vengal Rao.

hi,
Go to UTILITIES-> Update Navigation index.
or go to fucntion group and Generate the Funtion group once.
it will detect all fucntion modules under that function group.
regards,
Rama

How to find the Obsolete function module in ECC 6.0

Hi Guys,
How we can find the all obsolete function in ECC 6.0, is any T-code to finding the obsolete function modules, or any other way to find.
Could you please help me.
Thanks,
Gourisankar.

Hi Gouri,
If you are looking at determining whether a single FM is obsolete or not is by this method:
Go to FM in SE37 -> Goto Attributes Tab -> General Data section -> look above the Edit Lock field ... where SAP places the release status and date of the FM, if the FM is obsolete, the text Function Obsolete appears
This is one way of finding out one FM @ a time
However if you want to check on a mass scale, I dont have a SAP system here hence cant confirm, however, all FMs are stored in TFDIR database table. Please scroll through the fields of the DB table to check whether any field relates to release status or the like. If it does, then from SE16, you can put the value corresponding to "Obsolete" in the field and run to check all FMs.
Cheers,
Aditya

How to bring the custom function module in WE42?

Hi,
I have created a custom function module to post a custom idoc.
Process code has been created thro WE42 and WE57 is done.
Still I am not able to see the custom function module in the list (WE42) in order to assign it to process code.
May i know the reason for this?
Thanks.
Thiyagu

What makes you think that it should be visible in WE42? There is no F4-value help for this and you haven't added it manually yet, right.
In WE42 you can manually add entries, so that's what I would do.

Name fo table whcih stores names of all function modules

I want to create list of all the Z function modules in the system present in an excel file...Can u tell me the name of table where all the names of fucntion modules are stored in SAP..I found that the names of funtion groups and Z programs are stored in table TADIR..but i did not find function modules name there....

Hi
TFDIR is the table that contains all the FMs.
TRDIR is the table that contains all the Reports.
Regards,
Sreeram

How to search for a string in ALL Function Modules source code

Hello,
I want to search for the string "HELLO" in all FUNCTION MODULES source code(FM, no reports/programs).
Is this possible? How?
Cheers,
Andy

hi,
Execute RPR_ABAP_SOURCE_SCAN to search for a string in the code ... Press where-used-list button on the program which takes to the function group or the function module where it is used ..
Regards,
Santosh

What is the difference between the normal function module and bapi function

hi,
what is the difference between the normal function module and bapi function module.

Hi
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
Regards
Anji

Error in calling the Remote Function Module

Hi all,
I am trying to call the Remote function Module which is in CRM from ECC .
But we are not able to detect the function module as it is showing the error as Function Module not found.
Can anybody help us in calling the Remote Function Module .
Regards,
Madhavi

Please check the foll 2 things :
RFC radio button clicked in se37 for that FM
RFC connection established with the remote server in SM59
Thanks

Know the all function modules & descriptions

Similar Messages

Maybe you are looking for